MiFi 6620L Mobile Device

Quick Start Guide

The Verizon MiFi 6620L device is activated and configured as a mobile hotspot and is ready for use. Follow the quick steps listed below to connect and disconnect from the device You may connect a maximum of 15 Wi-Fi enabled devices; however, we recommend a maximum of 8. Battery power and performance speed degrade as you add more devices. NEVER leave the device in an unattended vehicle due to uncontrollable temperatures that may be outside the acceptable temperature for this device.

Important Note: The device should be used only for ACS Business purposes. (ACS devices are on a shared data plan; therefore, the device will not display the available data.) Test the device as soon as you receive it to ensure you are within the service area and the device is working properly.

Connecting to the Verizon 6620L Wireless Hotspot

Step 1: To power on the device, press and hold the Power Button until the Jetpack display lights up. • After the initial startup screens display, the Home screen and menu options are available. • The device will work with battery or when plugged into power using the AC power adapter.

Step 2: Access your Wi-Fi Name (SSID) and Wi-Fi Password. • Use the navigation buttons to scroll through the menu options and select Wi-Fi Name/Password.

Step 3: Connect your computer/iPad to the Verizon Wireless Hotspot. • On your computer/iPad, view the Available Wireless Networks and select the Network Name or SSID you found in the previous step. • When prompted, enter your Wi-Fi Network password. The Jetpack Home screen should now show an additional connected device. Once connected, you are ready for access to the Internet. Repeat this step until you have connected the number of devices needed. • The Jetpack will go into sleep mode after several minutes of inactivity. The display will be off and the blue Power indicator on the front panel of the Jetpack will blink. Press the on/off button to reactivate it.

Disconnecting from Verizon Wireless Hotspot and Turning off Device

Step 1: Disconnect from Wireless Connection. • Disconnect from the device using the Access Connections screen. If you are connected to ACSVPN, disconnect from VPN first then proceed with disconnecting device. The Jetpack Home screen should reflect the new number of connected devices. • Important: Disconnect the computer from the device before turning off or when disconnecting cables from the power source to avoid potential problems with computer screens freezing.

Step 2: To power off device, press and hold the Power Button until the display shows MiFi. • The Jetpack will continue its shutdown process for several seconds and then automatically turn off the display.

When disconnecting cables or power source, hold both the device and the end of the cable then pull straight out to avoid damaging the connectors.

Disconnect all cables from the device and store in the container provided. Do not pack or transport the device attached to the laptop or when powered on.

For Support Call: MTS @ 855-340-3182; 24x7x365 except for New Year’s Day, Memorial Day, July 4th, Labor Day, Thanksgiving Day and Christmas Day.

Return equipment within 7 business days after Event to: G Squared Wireless, Attn: ACS Device Logistics, 750 Old Hickory Blvd, Building 1, Suite 130, Brentwood, TN 37027.

Damage, equipment failure, theft or loss of equipment or parts must be reported immediately to the MTS Help Desk (855-340-3182) for protection of resources, network, and data. Do not attempt to repair or buy replacement parts. Verizon MiFi 6620L Mobile Device Components