DOCSLIB.ORG

Product Catalog

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Product Catalog Product Catalog Company Profile 1 Contact the Factory: WORK MORE IRON FOR LESS COIN Edwards Ironworkers 2 Edwards Manufacturing leads the industry with a full line of high quality, easy to maintain ELITE 110 3 Edwards Manufacturing Company hydraulic ironworking machinery. From 25 Ton to 120 Ton, single or dual operator models, our ELITE 110|65 Dual Operator 4 Ironworkers are sure to meet your needs and exceed your expectations. Our economical JAWS 25 Ton JAWS 5 1107 Sykes Street, P.O. Box 166 and feature packed ELITE Ironworkers benefit from our extensive line of tooling and innovative Albert Lea, MN 56007 USA 40 Ton JAWS 6 hydraulic accessory tools. When ordered with our patent-pending Hydraulic Accessory Pack feature, the JAWS Ironworkers becomes a power source for our ever-expanding line of 50 Ton JAWS 7 (800) 373-8206 Phone 55 Ton JAWS 8 hydraulic accessory tools. This feature comes standard when you select our state-of-the-art (507) 373-9433 Fax ELITE series. Simply “Plug n’ Play” with our 20 or 40 Ton Shop Press, 10 Ton Pipe/Tube 60 Ton JAWS 9 Bender, Horizontal Press or Radius Roller to add value to your daily fabrication activities. 65 Ton JAWS 10 Email Contacts: Buy an Edwards and get to work! 75 Ton JAWS 11 [email protected] [email protected] 100 Ton JAWS 12 100 Ton Deluxe JAWS 13 www.EdwardsIronworkers.com MADE IN AMERICA 120 Ton JAWS 14 Living and working in the heartland of America, we enjoy a simple, straightforward lifestyle Hydraulic Accessory Tools 15 that celebrates the values of good-old-fashioned hard work. Edwards Ironworking machinery is built upon these core values and is proudly MADE IN AMERICA. Our Ironworkers, Hydraulic Power Options 15 Accessory Tools and associated tooling are manufactured in Albert Lea, Minnesota. We use the 20 Ton Shop Press 16 highest quality materials and componentry and have builders and technicians who take pride 40 Ton Shop Press 17 in creating the best Ironworking machinery in the world. Our continuous innovation, product 10 Ton Tube/Pipe Bender 18 performance and drive to deliver the highest quality, most competitively priced products Horizontal Press 19 speaks to the enduring values of American manufacturing. Radius Roller 20 Tooling Accessories 21 DEALER NETWORK Punch Accessories 22 The Edwards Manufacturing Dealer Network is comprised of knowledgeable and motivated Notcher Tooling 24 machinery dealers throughout the United States and all around the world. Our Dealers are Shear Tooling 25 committed to helping their customers work efficiently and cost effectively, maximizing their Brake Tooling 25 profit. We depend on our dealers to work hard for us and we are committed to working hard General Accessories 26 for them. Our talented sales and service staff is dedicated to assist with all aspects of our machinery as well as solve specific application challenges. Edwards Strut Pro 27 Shown with optional Brake call (800) 373-8206 WWW.EDWARDSIRONWORKERS.COM 1 Edwards Superior 4 Station Ironworker Universal Open Tooling Station ANSI B11.5-1988R(02) Compliant Ironworkers ETL/UL Approved Controls Edwards Manufacturing has long enjoyed supporting the steel fabrication industry with a full ELITE Integrated Features: line of high quality, low maintenance and affordable ironworking machines. Long considered the Hydraulic Hold-Down Swing-Away Stripper Assembly “Swiss Army Knife” of the industry, these do-all machines punch, shear, notch and brake mild E-Stop/Lockout-Tagout Roller Encoder Measuring System steel plate, bar-stock and angle. A wide range of accessories are available to fabricate rod, square Electric Stroke Control Quick Change Punch Assembly stock, sheet metal and pipe. Our innovative Hydraulic Accessory Pack turns your Ironworker into Hydraulic Accessory Pack Premium Gauging Tables a power source for our Shop Presses, Tube/Pipe Bender, Radius Roller and Horizontal Press. Central Lubrication System LED Lighting With over 30,000 Edwards JAWS Ironworkers in service throughout the world, our reputation for PUNCH OPTIONAL COPER NOTCHER rock-solid, hard working machinery is unmatched. Now we’ve turned our attention to innovation Rating: 110 Tons Max. Capacity: 2-1/2” x 6” x 1/2” with Edwards ELITE Ironworkers. With all the best elements of our original Ironworker line, we Max. Capacity: 1-3/8” Dia. in 1” A36 Work Height: 44-3/16” have improved upon them with robust construction, integrated value-added features, superior Stroke: 1-13/16” performance and a fresh new look. Take a look at the Edwards ELITE Ironworkers and compare Throat Depth: 11-3/4” GENERAL SPECIFICATIONS Open Height: 8-5/8” them to any high-end Ironworker in the marketplace and you’ll see where we lead the pack. True Standard Motor: 7.5 HP 3~ 208 V or 230 V Shut Height: 6-13/16” 1765 RPM 22 A to our history, our original JAWS and ELITE Ironworkers provide extraordinary performance and Work Height: 41” incredible value for the dollar spent. Optional Motors: 7.5 HP 3~ 460 V FLAT BAR SHEAR 1765 RPM 11 A 7.5 HP 3~ 575 V Max. Capacity: 3/4” x 14” 1770 RPM 8 A 1” x 12” 7.5 HP 1~ 230 V Max. Round: 1-1/4” Max. Square: 1-1/4” 1765 RPM 36 A Hydraulic Pump: 10-1/2 GPM - 2 Stage Work Height: 41-1/2” Valve Pressure: 3000 PSI ANGLE SHEAR Reservoir: 17 Gallons Cylinder: 3-1/2” Ram Max. Capacity: 6” x 6” x 1/2” Work Height: 50-7/8” DIMENSIONS OPEN STATION Height: 66-1/16” Throat Depth: 15-1/2” Width: 57-1/4” Open Height: 8-5/8” Depth: 42-3/8” Shut Height: 6-13/16” Shipping Weight: 5380 lb Stroke: 1-13/16” Shown with optional Brake Work Height: 39-3/16” 2 CALL (800) 373-8206 WWW.EDWARDSIRONWORKERS.COM 3 True Dual Operation Five Workstations and Two Independent Power Plants ANSI B11.5-1988R(02) Compliant and ETL/UL Approved Controls Super-size Punch Throat Depth of 17-3/4” 25 TON DIMENSIONS PUNCH Universal Open Tooling Cavity Height: 65-1/8” Rating: 110 Tons Ideal for the Hobbyist Width: 91-9/16” Max. Capacity: 1-3/8” Dia. in 1” A36 ELITE Integrated Features: Two Available Workstations Depth: 44-7/8” Stroke: 3” Hydraulic Hold-Down Swing-Away Stripper Assembly Punch Assembly with Pedestal Die Table Shipping Weight: 8580 lb Throat Depth: 17-3/4” E-Stop/Lockout-Tagout Roller Encoder Measuring System Open Height: 9-3/4” Universal Open Tooling Station FLAT BAR SHEAR Shut Height: 6-9/16” Electric Stroke Control Quick Change Punch Assembly Rating: 65 Tons Work Height: 37-1/2” Hydraulic Accessory Pack Premium Gauging Tables Specialized for Smaller Jobs Max. Capacity: 3/8” x 24” Central Lubrication System LED Lighting 1/2” x 14” OPEN CAVITY Compact footprint and affordability make the Edwards 25 Ton JAWS Ironworker 1” x 4” Height: 9” the perfect fit for garages and small fab shops. Standard features include a Max. Round: 1” Width: 11-3/4” Punch Assembly with Pedestal Die Table and a universal open tooling station Max. Square: 1” Work Height: 40-7/8” Work Height: 33-1/2” to accept a variety of optional Tooling Accessories. ANGLE SHEAR COPER NOTCHER PUNCH GENERAL SPECIFICATIONS Max. Capacity: 5” x 5” x 3/8” Max. Capacity: 2-1/2” x 6” x 3/8” Work Height: 44” Work Height: 35-5/8” Rating: 25 Tons Standard Motor: 1 HP 1~ 230 V Max. Capacity: 1” Dia. in 5/16” A36 1725 RPM 7 A Stroke: 1” GENERAL SPECIFICATIONS Optional Motors: 1 HP 1~ 120 V Throat Depth: 5-1/2” 1725 RPM 14 A Standard Motor: 7.5 HP 3~ 208 V or 230 V Open Height: 7” Hydraulic Pump: 11 GPM - 2 Stage 1765 RPM 22 A Shut Height: 6” Work Height: 38-1/2” Valve Pressure: 2750 PSI Optional Motors: 7.5 HP 3~ 460 V Reservoir: 3 Gallons 1765 RPM 11 A Cylinder: 1-3/4” Ram 7.5 HP 3~ 575 V OPEN STATION 1770 RPM 8 A Stroke: 1” DIMENSIONS 7.5 HP 1~ 230 V Throat Depth: 5” 1765 RPM 36 A Open Height: 8” Height: 55” Hydraulic Pump: 10-1/2 GPM - 2 Stage Shut Height: 7” Width: 29” Valve Pressure: 3000 PSI Work Height: 35-3/4” Depth: 23” Reservoir: 17 Gallons Shipping Weight: 1200 lb Cylinder (Punch Side): 7-1/2” Bore / 3” Ram Cylinder (Shear Side): 6” Bore / 3-1/2” Ram Shown with optional Multi-Shear Shown with optional Pipe Notcher 4 CALL (800) 373-8206 WWW.EDWARDSIRONWORKERS.COM 5 40 TON 50 TON The Shopmate Compact and Versatile Four Available Workstations Four Available Workstations E-Stop/Lockout-Tagout E-Stop/Lockout-Tagout Universal Open Tooling Station Punch Assembly Designed for Optional Tooling Electric Stroke Control Dedicated Coper Notcher Station ANSI B11.5-1988R(02) Compliant Electric Stroke Control ETL/UL Approved Controls ANSI B11.5-1988R(02) Compliant ETL/UL Approved Controls Designed for small to medium-sized shops, the Edwards 40 Ton JAWS Ironworker has the tools to get the job done. Standard features include a Punch Assembly with Pedestal The Edwards 50 Ton JAWS Ironworker is the ideal Ironworker for the small shop that Die Table, 10” wide Flat Bar Shear, Angle Shear and a universal open tooling station to needs a powerful, versatile tool for all kinds of tasks. Standard features include a accept a variety of optional Tooling Accessories. Punch Assembly with Pedestal Die Table, Flat Bar Shear, Angle Shear and a dedicated Coper Notcher station. The Punch Assembly quickly converts to an open tooling station PUNCH OPTIONAL COPER NOTCHER designed to accept a variety of optional Tooling Accessories.
Load more

Recommended publications
  • Deadlands: Reloaded Core Rulebook
    This electronic book is copyright Pinnacle Entertainment Group. Redistribution by print or by file is strictly prohibited. This pdf may be printed for personal use. The Weird West Reloaded Shane Lacy Hensley and BD Flory Savage Worlds by Shane Lacy Hensley Credits & Acknowledgements Additional Material: Simon Lucas, Paul “Wiggy” Wade-Williams, Dave Blewer, Piotr Korys Editing: Simon Lucas, Dave Blewer, Piotr Korys, Jens Rushing Cover, Layout, and Graphic Design: Aaron Acevedo, Travis Anderson, Thomas Denmark Typesetting: Simon Lucas Cartography: John Worsley Special Thanks: To Clint Black, Dave Blewer, Kirsty Crabb, Rob “Tex” Elliott, Sean Fish, John Goff, John & Christy Hopler, Aaron Isaac, Jay, Amy, and Hayden Kyle, Piotr Korys, Rob Lusk, Randy Mosiondz, Cindi Rice, Dirk Ringersma, John Frank Rosenblum, Dave Ross, Jens Rushing, Zeke Sparkes, Teller, Paul “Wiggy” Wade-Williams, Frank Uchmanowicz, and all those who helped us make the original Deadlands a premiere property. Fan Dedication: To Nick Zachariasen, Eric Avedissian, Sean Fish, and all the other Deadlands fans who have kept us honest for the last 10 years. Personal Dedication: To mom, dad, Michelle, Caden, and Ronan. Thank you for all the love and support. You are my world. B.D.’s Dedication: To my parents, for everything. Sorry this took so long. Interior Artwork: Aaron Acevedo, Travis Anderson, Chris Appel, Tom Baxa, Melissa A. Benson, Theodor Black, Peter Bradley, Brom, Heather Burton, Paul Carrick, Jim Crabtree, Thomas Denmark, Cris Dornaus, Jason Engle, Edward Fetterman,
    [Show full text]
  • Catalogue English
    … a cut above the rest Catalogue English Machines and tools for sheet metal working Standing Seam Roofing Systems Benders www.dracotools.com Modern manufacturing DRÄCO Products have been manufactured in our production in Germany since 1951 Power tools and DRÄCO produces the original double-sided slitter shear system, a standing-seam - complete range of machines for the standing-seam as well as tools and technique equipment for metal roofing and standing seam technology Experience In close collaboration with the user products are manufactured close to the market. For more than 60 years DRÄCO continuous developing its cutting systems Introduced DRÄCO, the brand for rational and practical cutting systems, tools and machines Source of power We are able to deliver user friendly products and in high quality. Our hand-held shears are available in cordless (battery), compressed air (pneumatic) and wired (115/230 Volt). Folding machines, roll forming equipment and profiling machines for façades and roof seam in tin man’ s quality are available in 230V or 115V OEM You will also find DRÄCO products with private labels for other brands Advantage We always have an open ear for practitioners and users benefit when it comes to improvements and innovations, to bring together a product ready for production. As a family business, we’re a strong team. We’re in it to win for and with the costumer! Quality We produce robust quality products at a competitive price. We never settle for the first solution that comes by. Our principle is: things can always be smarter and cheaper International DRÄCO products are sold worldwide in over 60 countries with success Up-to-date and You can find our latest products on the internet at www.dracotools.com informative as well as important tips, technical information and news Max Draenert Apparatebau GmbH & Co.
    [Show full text]
  • Ironworker Agreement (Structural & Miscellaneous)
    IRONWORKER AGREEMENT (STRUCTURAL & MISCELLANEOUS) MAINLAND OF NOVA SCOTIA A COLLECTIVE LABOUR AGREEMENT BETWEEN NOVA SCOTIA CONSTRUCTION LABOUR RELATIONS ASSOCIATION LIMITED (hereinafter referred to as the "CLRA") 260 Brownlow Avenue, Unit No. 1 Dartmouth, Nova Scotia B3B 1V9 Phone: (902) 468-2283 Fax: (902) 468-3705 - AND - INTERNATIONAL ASSOCIATION OF BRIDGE, STRUCTURAL, ORNAMENTAL AND REINFORCING IRONWORKERS, LOCAL UNION 752 (hereinafter referred to as the "Union") Suite 103, 14 McQuade Lake Crescent Halifax, Nova Scotia B3S 1B6 Phone: (902) 450-5615 Fax: (902) 450-5082 THIS AGREEMENT dated this 6th day of July, 2012. EFFECTIVE DATE: May 3, 2012 EXPIRATION DATE: April 30, 2015 Amendment #1 - September 2, 2012 Amendment #2 – June 12, 2013 IRONWORKERS STRUCTURAL & MISC. LOCAL 752 MAY 3, 2012 – APRIL 30, 2015 INDEX ARTICLE NO. PAGE NO. ARTICLE 1 - RECOGNITION ..................................................................................................................................... 1 ARTICLE 2 - PURPOSE .............................................................................................................................................. 1 ARTICLE 3 - NO DISCRIMINATION OR INTIMIDATION ..................................................................................... 2 ARTICLE 4 - NO STRIKES OR LOCKOUTS ............................................................................................................ 2 ARTICLE 5 - MANAGEMENT RIGHTS ...................................................................................................................
    [Show full text]
  • Fabrication Instruction Manuals
    1 Annual Report Open Source Ecology | Annual Report 2012 How Open Source Ecology Was Born “Open licensing allows others Marcin Jakubowski was born in Poland. His grandfather led actions to replicate, reuse, adapt, in the Polish underground derailing German trains in WWII. His improve, adopt, bring to scale, grandmother lived through a concentration camp. When he was write about, talk about, remix, 10, tanks rolled down the streets of his neighborhood, and it translate, digitize, redistribute wasn’t a parade. These were times of martial law behind the Iron and build upon what we have Curtain — a clear state of material scarcity. Marcin and his family done.” waited in line for staples like butter and meat. His life would be transformed when his family left for America, but he never forgot The Shuttleworth Foundation the terrible things that happen when resources are scarce and people fight over opportunity. He began to think that the most essential type of freedom starts with an individual’s ability to use natural resources to free oneself from material constraints. Marcin thrived in the United States graduating with honors from Princeton University and earning his Ph.D. in fusion physics from the University of Wisconsin, Madison. Yet, he felt increasingly useless, as his studies were distancing him further from solving pressing world issues. So, Marcin started a farm in rural Missouri. He learned about the economics of farming. He bought a tractor — then it broke. He paid to get it repaired — then it broke again. Then, soon enough, he was broke too. He realized that the truly appropriate, low-cost tools that he needed to build a sustainable farm and settlement just didn’t exist yet.
    [Show full text]
  • 60 Ton Ironworker Manual
    60 TON IRONWORKER MANUAL 800-446-4402 www.clevelandsteeltool.com 474 E. 105th St. • Cleveland, OH 44108 Table of Contents 1 Company Profile, Warranty MAINTENANCE 2 Operator and Supervisor Information 36 Precautions, Maintenance Schedule INSTALLATION 37 General Maintenance 3 Requirements 38 Punch 4 Installing the Ironworker 39 Punch Tonnage Requirements 5 Wiring, Powering up 40 Bar Shear SAFETY 41 Angle Shear 6 Machine Front 42 Notcher 7 Machine Back 43 Pedestal Die 8 Machine Right Optional Tooling 9 Machine Left 44 Notcher 10 Danger and Warning Panel 45 Angle Notcher 11 Notice Panel 46 Oversize Punch 12 Additional Graphic 47 Pipe Notcher OPERATION 48 Brake Tooling 13 Precautions, Operations 49 Rod Shear/Multi-Shear 14 Machine Front 50 241 Punch Tooling 15 Machine Back Parts Breakdown 16 Machine Right 51 Exploded View 17 Machine Left 52 Parts List 18 Control Panel 53 Parts List 19 Angle Shear Station 20 Bar Shear Station 21 Electric Stroke Control 22 Punch Station 23 Punch Operation, Clearances and Tonnage 24 Notcher Station Optional Tooling 25 Angle Notcher 26 Auto-Cut 27 Brake 28-29 Notcher 30 Oversize Punch 31 Pipe Notcher 32 Rod Shear/Multi-Shear 33 241 Punch 34 Hydraulic Accessory Package 35 Troubleshooting Company Profile The Cleveland Steel Tool Company offers a full line of high quality, low maintenance Warranty hydraulic ironworking machines, associated The Cleveland Steel Tool Company will, tooling and accessories that are used in the steel within one (1) year of date of purchase, replace fabrication industry. With proper operation, care, F.O.B. the factory, any goods, excluding and maintenance, your Cleveland Steel Tool punches, dies, and/or blades, which are defective Ironworker will provide years of safe, trouble- in materials and workmanship provided that free ironworking service.
    [Show full text]
  • Precision Tooling for Stamping, Roll Forming and Metalforming
    Precision Tooling for Stamping, Roll Forming and Metalforming Custom Die Components, Ball Lock and Headed Punches, Die Buttons and Retainers www.AmericanPunchCo.com • [email protected] 800.243.1492 Precision Tooling for Stamping, Roll Forming and Metalforming Don’t let the precision die components be the piece in your manufacturing puzzle that prevents you from keeping your lines up and running. Count on American Punch Company for precision tooling that is engineered and manu- Automation Details factured with great care and attention to detail. Our state-of-the-art manufacturing facility Ball Lock Buttons utilizes the latest in wire EDM, CNC machining centers and CNC JIG grinding that ensures Ball Lock Retainers accuracy and repeatability for standard precision tooling and made-to-order components. Blade Punches Quality is manufactured into every tool. Cut-off Dies American Punch is dedicated to delivering the highest quality tooling available. Die Components Our precision manufacturing process begins with the finest tool steels produced Die Inserts today. Because we’re ISO certified, rigorous quality control procedures assure Die Sections that our tools stand up to the tough demands of all your applications. Headed and Headless Die Buttons Precision die components made to order, when you need them. Headed Punch Retainers We specialize in custom or made-to-order precision die components. From our plant Headed and Ball Lock in Cleveland, Ohio, tooling can be made to your specifications, or we can assist in the Punches design of your products. Piercing Punches Robotics Details Contact us today for all your precision tooling for stamping, roll forming and metalforming.
    [Show full text]
  • Piranha Ironworkers
    High Quality Genuine Piranha Tooling Piranha Ironworkers Capacities & Specifications Single Operator Ironworkers Make your Piranha Ironworker even more productive and flexible! Rated on Mild Steel (60,000) PSI Tensile Strength P-50, P-65, P-90, P-110 and P-140 All machines subject to changes in specification High Quality Tooling Piranha ironworkers give metal fabricators outstanding quality and innovative features. Every Piranha provides • Genuine Piranha tooling is formulated to extend your tooling life. P-50 P-65 P-90 P-110 P-140 PII-88 PII-140 SEP-120 1524 quality work, savings in set-up time, adaptability and P-65 • Each tool is laser-engraved for easy identification. versatility through a wide range of tooling, and factory Throat Depth 5" 8" 10" 12" 12" 9" 20.5" 21.5" 24" P-50 • Tuffskin tooling for extended tool life. Piranha Ironworkers engineering and support. Open Height 11-1/2" 13-1/2" 15" 15-1/2" 15-1/2" 14" 14" 12-1/4" 5-3/8" • Oversized tooling for all of your larger punching needs. Available Attachments for P-50: A, B, C, D, F, H, I, J, K Closed Height • Tooling is packed with a protective coating and then shrink-wrapped 7-3/4" 9-1/4" 10-1/8" 10-1/4" 10-1/4" 7-3/4" 7-3/4" 10-1/4" 3-3/8" Single Operator, Dual Operator, and Single End Punch Presses For P-65, P-90, P-110 and P-140: A, B, C, D, E, F, G, H, I, J, K to cardboard.
    [Show full text]
  • Apprenticeship Training Standard
    Apprenticeship Training Standard Ironworker - Generalist Trade Code: 420B Development Date: 2013 This document is the property of the apprentice named inside and represents the official record of his/her training. IRONWORKER GENERALIST CONTENTS PAGE Competency Analysis Profile ........................................................................................................... 2 Preface ........................................................................................................................................... 10 Definitions ..................................................................................................................................... 11 Important Directions to the Apprentice ........................................................................................ 13 Important Directions for the Sponsor/Employer & Supervisor/Trainer ....................................... 13 Notice/Declaration for Collection of Personal Information .......................................................... 14 Roles and Responsibilities of Apprentice, Sponsor/Employer and Supervisor/Trainer ......................................................................................................................... 15 Skill Set Completion Form ............................................................................................................. 17 SKILL SETS U0891.0 Protect Self and Others ......................................................................................... 18 U0892.0 Plan, Prepare and Set Up
    [Show full text]
  • Press Release
    Contact: Andrea Brogan Metabo Corp. Phone: (610) 436-5900 1231 Wilson Dr. Fax: (610) 436-9072 West Chester, PA 19380 [email protected] www.metabousa.com PRESS RELEASE Metabo’s New Brushless Cordless Nibbler and Shear For cutting sheet metal quickly and efficiently on curved and straight surfaces October 20, 2020 – West Chester, PA – Metabo Corporation, a leading German international manufacturer of professional-grade cordless and corded hand-held power tools and accessories in the US, introduces two new metalworking tools, an 18V nibbler and 18V shear. “The 18V Nibbler and 18V Shear have the best size to power ratio, slimmest grip and are the fastest cutting in their class among the competition due to Metabo’s 2nd generation brushless motor. These tools are the perfect addition to our expanding line of industry-leading cordless metalworking tools with the most advanced brushless motor and battery technology,” said Terry Tuerk, Metabo’s Senior Product Manager. The Metabo NIV 18 LTX BL 1.6, 18V nibbler, is available as a bare tool (601614850), or in a kit version with 2 - 4.0 LiHD batteries, charger and case (US601614400). A punch, die and combination key are included with the tool. The NIV 18 LTX BL 1.6 includes a speed selector for adjusting the cutting speed according to the material being worked. The nibblers' powerful Metabo brushless motor deliver up to 600- 2,360 strokes per minute. FOR IMMEDIATE RELEASE METABO’S NEW CORDLESS NIBBLER AND SHEAR PAGE 2 The tool can cut through 16-gauge mild steel, 18-gauge stainless steel and 14-gauge aluminum and has a minimum curve radius of 5/8".
    [Show full text]
  • Of Technical Bulletins
    TECHNICAL BULLETINS APRIL 2015 I Rev 1 This issue supersedes all previous issues Index of Technical Bulletins Bulletin Topic Date 1 General Guide to Good Practice in the Use of ZINCALUME® Steel for Roofing & Siding Products April 2015 2 Flashing Materials for Bare & Pre-painted ZINCALUME® Steel April 2015 3 Fastener Selection for ZINCALUME® Steel Roof & Siding Products April 2015 4 Prevention of Damage to ZINCALUME® Steel Roof & Siding Products from Metal Filings April 2015 5 Sealants for ZINCALUME® Steel April 2015 6 Cut Edge Protection of ZINCALUME® Steel April 2015 7 Guidelines for Welding ZINCALUME® Steel April 2015 8 Unsuitable Applications for ZINCALUME® Steel April 2015 9 Guidelines to the Effective Use of ZINCALUME® Plus Steel April 2015 Prevention of Oxide Formation (Black Rust) on ZINCALUME® Steel During Transportation, April 2015 10 Processing and Storage 11 Guidelines for General Field Maintenance of ZINCALUME® Steel Roofing and Siding April 2015 12 Guidelines for the Installation of Photovoltaic Panels with ZINCALUME® Steel April 2015 Hawaiian Islands: Exceptions to Standard Limited Warranty, Cleaning and Panel Design April 2015 13 Recommendations For more information or other questions not addressed by these bulletins please contact Steelscape’s Technical Service Department or your Steelscape Account Manager. TECHNICAL BULLETIN 1 APRIL 2015 I Rev 1 This issue supersedes all previous issues ZINCALUME® Steel General Guide to Good Practice in the Use of ZINCALUME® Steel for Roofing and Siding Products INTRODUCTION product for a specific structure. This is especially true Panels fabricated from ZINCALUME® Steel will provide for the special requirements of severe coastal many years of trouble-free service when properly and industrial as well as animal confinement designed, installed and maintained.
    [Show full text]
  • Sawing Sheet Metal Accurately with a Vertical Bandsaw, Version 1.0
    Sawing Sheet Metal Accurately with a Vertical Bandsaw, Version 1.0 By R. G. Sparber Protected by Creative Commons.1 I needed to cut a series of test samples out of 26-gauge sheet metal. The size was not important, but it had to have straight, parallel sides and 90° corners. My skill with tin snips was not good enough. After trying to perform accurate cuts with power shears and a power nibbler, I settled on my bandsaw in the vertical position. By using a fence and a “sled,” the coupons were fabricated. 1 This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/ or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA. R. G. Sparber May 22, 2020 Page 1 of 4 I started by using my tin snips to cut a rough strip. Then I used my belt sander to true up the edge. By pressing a parallel against the edge while looking at the gap with a strong light behind it, I can see gaps as small as 0.0001-inches. This straight edge is my reference. I placed it against a fence I erected2 on my bandsaw table. Taking great care to only cut the sheet metal and not my fingers, I made a strip with parallel sides. I went back to my belt sander to deburr. I used my reference edge and a machinist square to scribe cut lines. The piece was then roughly cut out with my tin snips.
    [Show full text]
  • Chapter 4: Metal Structure, Welding & Brazing
    9/27/01 AC 43.13-1B CHG 1 CHAPTER 4. METAL STRUCTURE, WELDING, AND BRAZING SECTION 1. IDENTIFICATION OF METALS 4-1. GENERAL. Proper identification of high temperatures, as this practice will cause the aircraft structural material is the first step the grain structure to enlarge. The length of in ensuring that the continuing airworthiness time required for the soaking temperature de- of the aircraft will not be degraded by making pends on the mass of the metal being treated. an improper repair using the wrong materials. The soaking time is roughly ¼ hour per inch of the diameter of thickness (Ref: Military Tech a. Ferrous (iron) alloy materials are Order (T.O.) 1-1A-9). generally classified according to carbon con- tent. (See table 4-1.) 4-2. IDENTIFICATION OF STEEL STOCK. The Society of Automotive Engi- TABLE 4-1. Ferrous (iron) alloy materials. neers (SAE) and the American Iron and Steel Institute (AISI) use a numerical index system MATERIALS CARBON CONTENT to identify the composition of various steels. Wrought iron Trace to 0.08% The numbers assigned in the combined listing Low carbon steel 0.08% to 0.30% of standard steels issued by these groups repre- sent the type of steel and make it possible to Medium carbon steel 0.30% to 0.60% readily identify the principal elements in the High carbon steel 0.60% to 2.2% material. Cast iron 2.3% to 4.5% a. The basic numbers for the four digit series of the carbon and alloy steel may be b. The strength and ductility, or tough- found in table 4-2.
    [Show full text]