PANDIT DEENDAYAL PETROLEUM UNIVERSITY SCHOOL OF TECHNOLOGY COURSE STRUCTURE FOR B.TECH. ELECTRICAL ENGINEEING SEMESTER III B.TECH. ELECTRICAL ENGINEEING Teaching Scheme Exam Scheme Sr. Course Theory Practical Total No Course Name Code L T P C Hrs/wk MS ES IA LW LE /Viva Marks

1 MA 201T Maths-III 3 1 0 4 4 25 50 25 -- -- 100 2 17EE 202T Network Theory 3 1 -- 4 4 25 50 25 -- -- 100 3 17EE 203T Electronics Devices and Circuits 4 0 -- 4 4 25 50 25 -- -- 100 4 17EE 204T Electrical Machines-I 4 0 -- 4 4 25 50 25 -- -- 100 Electrical Measurement and 5 17EE 205T 3 1 -- 4 4 25 50 25 -- -- 100 Measuring Instruments Electrical Machines-I 6 18EE 214P - - 2 1 2 50 50 100 Laboratory 7 18EE 215P Network Analysis Laboratory - - 2 1 2 50 50 100 Electrical Measurements and 7 18EE 216P Measuring Instruments - - 2 1 2 50 50 100

Laboratory

Total 17 3 6 23 26 800

MS = Mid Semester, ES = End Semester; IA = Internal assessment (like quiz, assignments etc) LW = Laboratory work; LE = Laboratory Exam

Page 1 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch Semester – III Course Code: 17EE 202T Course: NETWORK THEORY Teaching Scheme Examination Scheme Theory Practical Total L T P C Hrs/Week MS ES IA LW LE /Viva Marks 3 1 -- 4 4 25 50 25 -- -- 100

Prerequisites : Elements of

Course Objectives: - To provide essential understanding of design, analysis, testing and practical implementation of electrical networks. - To provide sound understanding about the electrical networks, network elements, network analysis using Mesh current & Nodal method. - To impart knowledge about the AC and DC circuits and methods to determine the values of electrical quantities in different parts of the AC and DC circuits. - To provide an insight into analyzing the coupled circuits and the impact of R-L-C components on the operation of a circuits - To introduce the concept of two port networks

UNIT I 10 NETWORK CONCEPTS: Network Element Symbols & Conventions, Active Elements, Current & Voltage Conventions, Loops & Meshes, Nodes, Coupled Circuits & Dot Conventions.

NETWORK ANALYSIS TECHNIQUES ANDTHEOREMS: Mesh Currents Analysis, Node Voltage Analysis, Solutions of Linear Node Equations & Circuit Analysis Using Matrices, Linearity & Superposition, Independent Sources & their Transformations, Circuit Analysis Based on Thevenin’s Theorem, Norton’s Theorem, Millman’s Theorem, Tellengen’s Theorem, Reciprocity Theorem & Maximum Power Transfer Theorem, Duality & Concept of Dual Network, Magnetically Couples Circuit Analysis.

UNIT II 10 LAPLACE TRANSFORMATION: Laplace Transform Fundamentals, Properties & Theorems, Unit Step Function, Unit Impulse Function, Unit Ramp Function, Doublet Function, Signal Analysis based on Step, Ramp, Impulse & Doublet Functions, Laplace Transform for Shift & Singular Functions, Initial & Final Value Theorems, Waveform Synthesis, Convolution Integral.

TWO PORT NETWORK: Characteristic of Two Port Network, Impedance & Admittance Parameters, ABCD & H Parameters, Symmetry & Reciprocity, Inter Relationship between the Parameters, Ladder & Lattice Network, T &  Representation, Connection of Two Port Networks.

UNIT III 09 GRAPH THEORY AND ITS APPLICATIONS: Fundamental Concepts, Definition of Graph & Various Related Terms, Paths & Circuit Connections, Trees of a Graph, Cut Sets & Tie Sets, Non-Separable Planner & Dual Graphs, Matrices of Oriented Graphs, Properties & Inter Relationships of Incidence, Tie &

Page 2 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch Cut Set Matrices, Complete Circuit Analysis using Tie Set & Cut Set Matrices.

UNIT IV 10 NETWORK FUNCTIONS: Concepts of Complex Frequency, Transform Impedance, Network Functions of One & Two Port Networks, Concept of Poles & Zeros, Properties of Driving Point & Transfer Functions, Time Response Stability From Pole Zero Plot.

AC AND DC TRANSIENTS: Initial & Final Conditions of Networks, DC Transients Analysis with R-L, R-C & R-L-C Circuits, Two Mesh Transients, Sinusoidal Transient Analysis of R-L, R-C & R-L-C Circuits using Laplace Transforms, Two Mesh AC Transients, Complete Response of R-L, R-C, & R-L-C Circuits to Step, Sinusoidal, Exponential, Ramp, Impulse functions & their Combinations.

Self-study: The self- study contents will be declared at the commencement of semester.

TOTAL HOURS 39 Texts and References: 1 Hayt W.H., Kemmerly J. E., Durbin S. M., “ Engineering Circuit Analysis ”, Tata Mcgraw Hill. 2 Edminister Joseph A., “ Electrical Circuits, Schaum’s Outline Series ”, Tata Mcgraw Hill. 3 Van Valkenburg M.E., “ Network Analysis ”, Prentice Hall, India, 2002. 4 A. Chakarbrati, “ Circuit Theory ”, DhanapatRaiand Co.

Page 3 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch Semester III Course Code: 17EE 203T Course: ELECTRONIC DEVICES AND CIRCUITS Teaching Scheme Examination Scheme Theory Practical Total L T P C Hrs/Week LE /Viv MS ES IA LW Marks a 4 -- -- 4 4 25 50 25 -- -- 100

Prerequisites : Basic Electronics

Course Objectives: - To impart the students with knowledge about devices like , transistors, BJTs and FETs. - To provide the sound understanding of theoretical concepts, configurations, frequency response analysis of electronic circuits comprising of semiconductor devices. - To introduce the concept of feedback and the applications of semiconductor devices such as amplifiers and oscillators.

UNIT I 06 P-N JUNCTION CHARACTERISTICS AND CIRCUITS: Introduction to Semiconductor Materials, Electron & Hole Pairs in Intrinsic , Donor & Acceptor Impurities, P-Type & N-Type Semiconductors, Formation of P-N Junction Diode, Biasing of P-N Junction Diode, V/I Characteristic of Diode, ON-State & OFF-State Diode Resistance, Concept of Load-Line, Piecewise Linear Model, Clipper & Clamper Circuits using Diodes, Diode Comparators, Diode Bridge (1-Phase Half Wave And Full Wave Rectifier), Calculation in Rectifier Output, Reduction in Ripple using L- Filter, C-Filter, & L-C Filter, Reverse Recovery Characteristics of Diode, Schotky Diode, V-I Characteristics of , Zener Diode as a .

18 UNIT II

BIPOLAR JUNCTION TRANSISTOR CHARACTERISTICS: Introduction to Bipolar Junction Transistor (BJT), Transistor Current Components, Working of a BJT, Transistor as an Amplifier (CB, CE and CC Configurations), Input and Output Characteristics, Transistor as a Switch, Early Effect, Punch Through Effect.

TRANSISTOR BIASING AND THERMAL STABILIZATION: Load Line Analysis (AC load line and DC load line), Significance of Biasing, Bias Stability, Factors Affecting Bias Stability, Biasing Methods, Stability Factor, Bias Compensation.

FIELD EFFECT TRANSISTORS: Junction FET, Pinch-Off Voltage, JFET Operating & Transfer Characteristics, the FET as a Voltage Variable Resistor, FET Small-Signal Model, Biasing the FET, Different FET Configurations, MOSFET, MOSFET Characteristics in Enhancement and Depletion Modes.

Page 4 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch

UNIT III 16 TRANSISTOR AT LOW & HIGH FREQUENCIES: Transistor Hybrid Model, h-Parameters, Conversion Formulas for the Parameters of Three Transistor Configurations, Analysis of a Transistor Amplifier Circuit using h-Parameters, Thevenin’s Theorem, Norton’s Theorem & Corollaries, Emitter Follower, Comparison of Transistor Amplifier Configurations, Linear Analysis of a Transistor Circuit, Miller’s Theorem and its Dual, Cascading Transistor Amplifiers, Simplified Calculations for CE and CC configuration. Hybrid– CE Transistor Model, Hybrid–  Conductance, Hybrid–  Capacitances, CE Short-Circuit Current Gain, Current Gain with Resistive Load.

UNIT IV 12 FEEDBACK AMPLIFIERS: Classification of Amplifiers, Feedback Concept, Transfer Gain with Feedback, General Characteristics of Negative Feedback Amplifiers, Input and Output Resistance, Method of Analysis of a Feedback Amplifier, Voltage Series Feedback, Current Series Feedback, Current Shunt Feedback, Voltage Shunt Feedback. OSCILLATORS: Damped & Un-damped Oscillations, Barkhausen’s criteria for Oscillators, Various Oscillator Circuits. POWER AMPLIFIERS: Classification of Power Amplifiers, Class A, Class B, Class AB & Class C Power Amplifiers.

Self-study: The self- study contents will be declared at the commencement of semester.

TOTAL HOURS 52

Texts and References: 1 Millman and Halkias, “ Integrated Electronics ”, McGraw Hill Publications. 2 Boylestad and Nashlesky, “ Electronic Devices and Circuit Theory ”, PRENTICE HALL OF INDIA. 3 Albert Malvino and David J. Bates, “ Electronic Principles ”, Tata McGraw Hill. 4 Floyd, “ Electronic Devices ”, PRENTICE HALL OF INDIA.

Page 5 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch

Semester III Course Code: 17EE 204T Course: ELECTRICAL MACHINES-I Teaching Scheme Examination Scheme Theory Practical Total L T P C Hrs/Week MS ES IA LW LE /Viva Marks 4 0 -- 4 4 25 50 25 -- -- 100

Prerequisites : Elements of Electrical Engineering

Course Objectives: - To create awareness about the basic principles, fundamental concepts, working and operating characteristics of electrical machines, such as D.C. Machines & . - To understand the operating characteristics and testing methods for D.C. Machines & Transformers. - To understand the performance analysis of different types of DC machines & Transformers - To have a sound knowledge about the different applications of DC machines & Transformers.

UNIT I 06 PRINCIPLES OF ELECTROMECHANICAL ENERGY CONVERSIONS: Introduction, Principle of Singly Excited & Doubly Excited Systems, Electromagnetic & Reluctance Torques, Physical Concept of Force & Torque Production, Concept of General Terms Pertaining to Rotating Machines, Generated EMF in Full Pitched & Short Pitched Winding, Pitch & Distribution Factors, MMF of a Coil, Energy Stored in Magnetic Field, Torque in Machines with Cylindrical Air-Gap.

UNIT II 22 DC MACHINES DC generator: Principle & Construction of a DC Machine, Armature Windings, Types of DC Generators, EMF Equation, Voltage Build-Up in a Shunt Generator, Critical Resistance & Speed, Losses in DC Machine, Power Stages & Efficiency, Armature Reaction & its Effects, Inter Poles & Compensating Winding, Commutation & Methods to Improve Commutation, Characteristics of DC Generators, Applications. DC Motor: Working Principle, Back EMF, Voltage & Power Equations, Types, Torque of a DC Motor, Power Stages, Efficiency, Performance Characteristics, Necessity of Starter, Three & Four Point Starters, Speed Control of DC Motors, Applications. Efficiency and Testing of DC Machines: Methods of Testing, Brake Test, Swinburne’s Test, Hopkinson’s Test, Field Test, Retardation Test.

UNIT III 12 SINGLE PHASE : Types, Working Principle, Construction, EMF Equation, Transformer on No-Load & ON Load, Ideal Transformer, Actual & Practical Transformer, Vector Diagrams, Equivalent Resistance & Reactance, Equivalent Circuits, Losses, Efficiency & Voltage Regulation, All Day Efficiency, Direct Load Test, O.C. & S.C. Tests, Sumpner’s Test, Polarity Test, Parallel Operation & Load Sharing, Auto Transformers, Applications of Auto Transformers.

Page 6 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch UNIT IV 12 THREE PHASE TRANSFORMER: Construction, Types, Phase Groups, Connections (Including Open Delta), Parallel Operation of 3-Phase Transformers, Scott Connection, Three Winding Transformer, Tertiary Winding, Voltage Regulation & Tap Changers, Magnetizing Inrush, Harmonics in Transformer, Cooling Methods, Protective & Safety Devices Fitted on Transformers.

Self-study: The self- study contents will be declared at the commencement of semester.

TOTAL HOURS 52

Texts and References: 1 I. J. Nagrath and D.P. Kothari, “ Electrical Machines ”, Tata Mcgraw Hill. 2 J. B. Gupta, “ Theory and Performance of Electrical Machines ”, S. K. Kataria and Sons. 3 Ashfaq Hussain, “ Electrical Machines ”, Dhanpat rai and Sons. 4 M. G. Say, “ The Performance and Design of Electrical Machines ”, Pitman and Sons. 5 J. G. Jamnani, “Electrical Machines” , Mahajan Publishing House. 6 Fitzgerald A.E and Kingsley, Electrical Machinery, Tata McGraw Hill

Page 7 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch

Semester III Course: ELECTRICAL MEASUREMENT AND MEASURING Course Code: 17EE205T INSTRUMENTS Teaching Scheme Examination Scheme Theory Practical Total L T P C Hrs/Week MS ES IA LW LE /Viva Marks 3 1 -- 4 4 25 50 25 -- -- 100

Course Objectives: - To enable the students to gain knowledge about different techniques for measuring the resistance/capacitance/inductance/impedance offered by the circuit components and that of the electrical quantities using electrical and electronic instruments. - To learn the use of DC and AC bridges for measuring resistance, capacitance, and inductance. - To learn the use of different types of analog meters for measuring electrical quantities such as current, voltage, power, energy, , and frequency. - To learn the principle of working and applications of CRO and other electronic measuring devices.

UNIT I 12 STANDARDS: Standards & their Classification, Electrical Standards of EMF, Current, Resistance & Capacitance.

MEASUREMENT OF RESISTANCE: Classification of Resistances, Kelvin’s Bridge, Wheatstone’s Bridge, Carey Foster’s Bridge, Direct Deflection Method & Loss of Charge Method for Measurement of Insulation Resistance, Meg-Ohm Bridge, Measurement of Surface Resistivity, Earth Resistance.

MEASUREMENT OF INDUCTANCE AND CAPACITANCE : General Four Arm AC Bridge Network, Maxwell, Hay Anderson, Schering & Networks, Wagner Earthling Device, Headphone & Vibration Galvanometer as Detector.

12 UNIT II INDICATING AND INTEGRATING INSTRUMENTS : Classification, Operating Principles, General Construction Details of Indicating Instruments, Balancing, Control & Damping Method, Theory & Construction of PMMC, Moving Iron, Electrostatic & Rectifier Instruments, Electrodynamic Wattmeter, Induction Energy Meter, Measurement of Three Phase Power.

INSTRUMENT TRANSFORMERS: Theory of Current & Voltage Transformer, Ratio Error & Phase Angle, Burden, Turns Compensation Performance Characteristics, Testing & Application of CT & PT.

06 UNIT III MAGNETIC MEASUREMENTS: Theory & Calibration of Ballistic Galvanometer, Flux Meter & Measurement of Flux, Measurement of Iron Loss by Wattmeter Method, Hibbert’s Magnetic Standard.

Page 8 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch

UNIT IV 09 POTENTIOMETERS: Construction, Operation, Types, Standardization & Application of DC & AC Potentiometers, VR Box, Measurement of Unknown Resistance, Current, Voltage.

CATHODE RAY OSCILLOSCOPE: Basic CRO Circuit (Block Diagram), Cathode Ray Tube (CRT) & Its Components, Application of CRO in Measurement, Measurement of Phase, Frequency, Current & Voltage- Lissajous Pattern, Dual Trace & Dual Beam Oscilloscopes, Digital Storage Oscilloscope(DSO).

Self-study: The self- study contents will be declared at the commencement of semester.

TOTAL HOURS 39 Texts and References: 1 Golding and Widdis, “ Electrical measurements and Measuring instruments ”, Wheeler Books 2 W. D. cooper and A.P. Helfrick, “ Modern Electronic Instrumentation and Measurement Techniques ”, PRENTICE HALL OF INDIA. 3 A. K. Sawhney, “ Electrical and Electronic Measurements and Instrumentation ”, Dhanpat Rai and Co. 4 R. K. Rajaput, “ Electrical and Electronics Measurements and Instrumentation ”, S. Chand and Company Ltd.

Page 9 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch

Semester III Course Code: 18EE 214P Course: ELECTRICAL MACHINES – I LABORATORY Teaching Scheme Examination Scheme Theory Practical Total L T P C Hrs/Week MS ES IA LW LE /Viva Marks -- -- 2 1 2 ------50 50 100

List of Experiments: 1. To understand the construction and operation of dc machine by working cut section. 2. To obtain the efficiency and load characteristics of a dc shunt motor by direct load test. 3. To determine external and internal characteristics of a dc shunt generator. 4. To determine external and internal characteristics of a dc compound generator. 5. To control speed of a dc shunt motor by armature control and field control methods. 6. Speed Control Methods of dc series motors. 7. To find the efficiency of a dc machine by Swinburne’s test. 8. To perform Hopkinson’s Test on a pair of two identical dc machines to find the efficiency of each machine. 9. To perform Field test on a pair of two identical dc series machines to find the efficiency 10. Polarity and Voltage ratio Test on Single Phase Transformer. 11. Load Test on Single Phase Transformer. 12. Open circuit and short circuit test on single Phase Transformer. 13. To determine the parameters of an equivalent circuit of a single phase transformer 14. Sumpner’s Test on Single Phase Transformer 15. Parallel operation of Single Phase Transformers. 16. To perform load test on three phase transformer to find out efficiency and regulation. 17. Parallel operation of two three Phase Transformers. 18. To obtain 2-phase supply from 3-phase supply using Scott connection.

Page 10 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch

Semester III Course Code: 18EE215P COURSE: NETWORK ANALYSIS LABORATORY Teaching Scheme Examination Scheme Theory Practical Total L T P C Hrs/Week MS ES IA LW LE /Viva Marks -- -- 2 1 2 ------50 50 100

List of Experiments: 1 Study and verification of Thevenin’s Theorem. 2 Study and verification of Norton Theorem. 3 Study and verification of Superposition theorem. 4 Study and verification of Maximum power transfer Theorem. 5 Transient analysis of RL/RC circuits. 6 Transient analysis of RLC circuits. 7 Study of Two Port Network. 8 Study of Two Port Ladder Network. 9 Study and verification of T and π Networks.

Page 11 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch Semester III COURSE: ELECTRICAL MEASUREMENTS AND MEASURING Course Code: 18EE216P INSTRUMENTS LABORATORY Teaching Scheme Examination Scheme Theory Practical Total L T P C Hrs/Week MS ES IA LW LE /Viva Marks -- -- 2 1 2 ------50 50 100

List of Experiments:

1 Measurement of resistance using 2 Measurement of Inductance and Capacitance using Wein Bridge 3 Measurement of Inductance and Capacitance using Hay’s Bridge 4 Measurement of Resistance using Kelvin Double Bridge 5 Measurement of Resistance using 6 Measurement of Inductance and Capacitance using 7 Measurement of Inductance and Capacitance using Anderson Bridge 8 Measurement of Capacitance using 9 Measurement of Capacitance using De-Sauty’s Bridge 10 Single Phase Energy meter Demonstration

Page 12 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch PANDIT DEENDAYAL PETROLEUM UNIVERSITY SCHOOL OF TECHNOLOGY COURSE STRUCTURE FOR B.TECH. ELECTRICAL ENGINEEING

SEMESTER IV B.TECH. ELECTRICAL ENGINEEING Teaching Scheme Exam Scheme Sr. Course Theory Practical Total No Course Name Code L T P C Hrs/wk MS ES IA LW LE /Viva Marks

Numerical and Statistical 1 17MA 202T 3 1 0 4 3 25 50 25 -- -- 100 Methods 2 17EE 208T Analog and Digital Electronics 3 1 -- 4 4 25 50 25 -- -- 100 3 17EE 209T Control Theory 3 1 -- 4 4 25 50 25 -- -- 100 4 17EE 210T Power System-I 3 1 -- 4 4 25 50 25 -- -- 100 5 17EE 211T Electrical Machines-II 4 0 -- 4 4 25 50 25 -- -- 100 Electrical Machines-II 6 18EE 217P -- -- 2 1 2 ------50 50 100 Laboratory Analog and Digital Electronics 7 18EE 218P -- -- 2 1 2 50 50 100 Laboratory 8 18EE 219P Control Theory Laboratory -- -- 2 1 2 50 50 100 Total 16 4 6 23 25 800

MS = Mid Semester, ES = End Semester; IA = Internal assessment (like quiz, assignments etc) LW = Laboratory work; LE = Laboratory Exam

Page 13 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch Semester IV Course Code: 17EE 208T Course: ANALOG & DIGITAL ELECTRONICS Teaching Scheme Examination Scheme Theory Practical Total L T P C Hrs/Week MS ES IA LW LE /Viva Marks 3 1 -- 4 4 25 50 25 -- -- 100

Prerequisite: Electronics Devices & Circuits

Course Objectives: - To enable the students to understand the fundamentals of analog integrated circuits and digital electronics. In addition, the course equips them with the knowledge of basic circuit designing for various applications. - To provide in-depth knowledge about Digital logic ICs, Combinational and Sequential circuits. - To emphasize on the significance of low power, small size, reliable, high performance Operational Amplifiers.

UNIT I 08 INTRODUCTION TO OP-AMP: Introduction to Operational Amplifiers (Op-Amp), Ideal Op-Amp, Op- Amp Characteristics, Differential, Inverting & Non-Inverting Amplifiers, Practical Op-Amp (Input Offset Voltage, Input Bias Current, Input Offset Current, Total Output Offset Voltage, Thermal Drift, Common Mode Configuration And CMRR), Op-Amp with Negative Feedback (Voltage-Series & Voltage-Shunt Feedback Amplifier), Frequency Response of Amplifiers.

UNIT II 09 OP-AMP APPLICATION: DC & AC Amplifiers, Peaking Amplifier, Summing, Scaling & Averaging Amplifier, Differential Input & Differential Output Amplifier, Integrator & Differentiator, Low Pass Filter, High Pass Filter, Band Reject Filter, Band Pass Filter & All Pass Filter, Basic Comparator, Zero- Crossing Detector, Schmitt Trigger, Window Detector, Voltage Limiters, Voltage to Frequency & Frequency to Voltage Converter, Analog to Digital & Digital to Analog Converters, Voltage Controlled Oscillator, Phase Locked Loop, Fixed & Adjustable Voltage Regulators, 555 Timer as Astable, Bi-Stable & Mono-Stable Multi-Vibrators.

UNIT III 10 BINARY SYSTEMS, BOOLEAN ALGEBRA AND LOGIC GATES: Binary Arithmetic, Binary Codes, Binary Logic, Basic Theorems & Properties of Boolean Algebra, Boolean Functions, Canonical & Standard Forms, Digital Logic Gates & Their Properties, K-Map Method, Four/Five Variable Map, POS & SOP Simplification, Don’t Care Conditions, NAND & NOR Implementation, Exclusive OR Functions. COMBINATIONAL LOGIC: Combinational Circuit – Analysis & Design, Binary Adder & Subtractor, Decimal Adder, Binary Multiplier, Decoder, Encoder, Multiplexer & De-Multiplexers.

UNIT IV 12 SYNCHRONOUS SEQUENTIAL LOGIC: Sequential Circuits, Latches, Flip -Flops & Excitation Tables , Analysis of Clocked Sequential Circuits, Design of Sequential Circuits.

Page 14 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch REGISTERS AND COUNTERS: Registers, Shift registers, Ripple Counter, Synchronous Counters, Ring/Johnson Counter.

Self-study: The self- study contents will be declared at the commencement of semester.

TOTAL HOURS 39 Texts and References: 1 R. A. Gaikwad, “ Operational amplifiers and Linear Integrated Circuits ”, Prentice Hall of India. 2 Morris Mano, “ Digital Design ”, Prentice Hall of India. 3 A. S. Sedra and K. C. Smith , “ Microelectronics Circuits ”, Oxford University Press 4 Donald Leach, Albert Malvino, and Goutam Saha, “ Digital Principles and Applications ”, Tata Mc. Craw Hill. 5 Anand Kumar, “ Switching Theory and Logic Design ”, Prentice Hail of India

Page 15 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch Semester IV Course Code: 17EE 209T Course: CONTROL THEORY Teaching Scheme Examination Scheme Theory Practical Total L T P C Hrs/Week MS ES IA LW LE /Viva Marks 3 1 -- 4 4 25 50 25 -- -- 100

Course Objectives: - Introduce to students some real systems, which use automatic control. - Introduce to students mathematical modeling of physical systems. - To teach students the characteristics of closed-loop control systems, including steady-state and transient response, disturbances, error, and stability. - Introduce students to analysis of feedback control systems. - To impart knowledge in stability analysis of control systems - To teach students basic control system design methods, including root locus diagrams and frequency response methods. - Introduce to concept of state and state space models of a system

UNIT I 08 INTRODUCTION TO CONTROL SYSTEM: Open loop and closed loop systems, examples, components of control systems, types of control systems, concept of feedback, positive and negative feedback.

UNIT II 12 MATHEMATICAL MODELING OF PHYSICAL SYSTEMS: Modeling of physical systems such as mechanical, electrical, thermal and chemical systems, analogous systems, concept of transfer function, poles, zeros, order and type of the system, computation of overall transfer function, block diagram reduction techniques, signal flow graphs. TIME RESPONSE ANALYSIS: Standard test signals, transient and steady state response of first and second order systems, time response specifications, steady state error analysis.

12 UNIT III STABILITY ANALYSIS OF CONTROL SYSTEMS: Notations of stability, Necessary conditions for stability, Routh-Hurwitz stability criterion, Relative stability, Basic properties of root locus, rules to construct root locus, stability analysis and control design using root locus. FREQUENCY DOMAIN ANALYSIS: Introduction to frequency response, frequency response specifications, stability analysis using Bode plots, Polar and Nyquist plots.

08 UNIT IV INTRODUCTION TO STATE SPACE: Concept of state, state variables, state space modeling, conversion of state space equations to transfer function, solution of state equation, controllability and observability. TOTAL HOURS 40

Page 16 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch

Texts and References:

1. I.J. Nagrath and M.Gopal, “ Control system Engineering ”,New age International Limited. 2. Katsuhiko Ogata, “ Modern Control Engineering ”,PHI Learning Pvt. Ltd., New Delhi. 3. Gene F. Frankline, J. David Powell, Abbas Emami-Naeini, “ Feedback Control of Dynamic Systems ”, Pearson Education Inc. 4. I.J. Nagrath and M.Gopal , “ Systems Modeling and Analysis ”, Tata McGraw-Hill Publishing Company Limited. 5. Norman N. Nise, “Control system engineering ”, Wiley International Edition.

Page 17 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch Semester IV Course Code: 17EE 210T Course: POWER SYSTEM - I Teaching Scheme Examination Scheme Theory Practical Hrs/Wee Total L T P C LE /Viv k MS ES IA LW Marks a 3 1 -- 4 4 25 50 25 -- -- 100

Course Objectives: - To enrich the students with the fair knowledge of distribution systems, transmission line parameters, cables, insulators and the recent trends in Transmission and Distribution Systems. - To understand the various types of transmission and distribution systems - To analyze the performance of transmission lines. - To know about the transmission and distribution Substation.

UNIT I 12 INTRODUCTION TO BASIC STRUCTURE OF POWER SYSTEM: Generation, Transmission & Distribution, Generating Stations, Schematic Arrangement, Advantages & Disadvantages, Efficiency, Choice of Site, Types of Prime Movers & its Characteristic, Speed Control & Auxiliaries, Environmental Aspects For Selecting Sites & Locations For: (A) Steam Power Station, (B) Hydro Power Station, (C) Nuclear Power Station, (D) Gas Turbine Power Plant, (E) Combined Cycle Power Plant

16 UNIT II OVERHEAD TRANSMISSION LINE: Types of Conductors, Calculation of Line Parameters – Inductance & Capacitance of Single Phase and Three Phase Lines, Symmetrical & Unsymmetrical Configurations, Concepts Of GMD & GMR, Transposition, Bundle Conductors, Double or Parallel Circuit, Calculation of Capacitance for 2 Wire & 3 Wire Systems, Capacitance Calculations for Symmetrical & Asymmetrical Single & Three Phase, Single & Double Circuit Lines, Effect of Earth on Capacitance Calculation, Interference with Communication Circuit, Concept of Corona Discharge. PERFORMANCE OF LINES: Short, Medium & Long Lines - Representation, A, B, C, D Constants, Voltage Regulation & Transmission Efficiency, Ferranti Effect, Surge Impedance & Surge Impedance Loading, Charging Current.

12 UNIT III POWER FLOW THROUGH TRANSMISSION LINE: Mathematical Expressions, Effect of Active & Reactive Power Flow on Bus Voltage Magnitude & Phase Angle. OVERHEAD LINE INSULATORS: Different Types, Voltage Distribution, String Efficiency, Methods of Equalizing Potential, Insulator Failure. MECHANICAL DESIGN OF OVERHEAD LINES: Sag & Tension Calculations, Effect of Ice and Wind, Stringing Chart, Sag Template, Tower Design, Spacing & Clearance, Vibration Damper. UNDERGROUND CABLES: Different Types, Insulating Materials, Capacitance of Single & 3-Core Belted Cables, Calculations of Insulation Resistance & Stress in Insulation, Dielectric Stress, Grading, Capacitance Grading, Inter-Sheath Grading, Heating & Causes of Breakdown.

Page 18 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch UNIT IV 12 PER-UNIT METHOD OF COMPUTATION: Per-Unit Quantities, Changing the Base of Per-Unit Quantities, Per-Unit Impedance of Single Phase & Three Phase Transformers & , Advantages of Per-Unit Method. POWER SYSTEM GROUNDING OR EARTHING: Equipment Grounding, Neutral Grounding – Different Methods, Grounding Transformer. Introduction to EHVAC & HVDC Transmission & Comparison between them, Electronic grounding, Electric Safety.

Self-study: The self- study contents will be declared at the commencement of semester.

TOTAL HOURS 52 Texts and References: 1 Sivanagaraju and Satyanarayana, “ Electrical Power Transmission and Distribution ”, Pearson Education. 2 Glover, Sarma , and Overbye, “ Power System Analysis and Design ”, Cengage Publication. 3 B. A. Oza, “ Power System Generation ” 4 M. V. Deshpande, “ Electrical Power Stations ”, Prentice Hall of India Publications. 5 Dr. S. L. Uppal, “ Electrical Power ” 6 Soni, Gupta and Bhatnagar, “A course in electrical power ” 7 S. N. Singh, “ Electric Power Generation Transmission and Distribution ,” Prentice-Hall of India Pvt. Ltd. 8 Kothari & Nagrath, “Power System Engineering,” Tata McGraw-Hill Education, 2008

Page 19 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch

Semester IV Course Code: 17EE 211T Course: ELECTRICAL MACHINES-II Teaching Scheme Examination Scheme Theory Practical Total L T P C Hrs/Week MS ES IA LW LE /Viva Marks 4 0 -- 4 4 25 50 25 -- -- 100

Prerequisites : Elements of Electrical Engineering, Electrical Machines-I

Course Objectives: - To create awareness about the basic principles, fundamental concepts, working and operating characteristics of AC machines, such as Synchronous Machines & Induction machines. - To understand to their principle of operation, characteristics and testing of Synchronous Machines & Induction machines. - To understand the performance analysis of different types of Synchronous Machines & Induction machines - To impart sound knowledge about the different applications of Synchronous Machines & Induction machines

UNIT I 18 THREE PHASE INDUCTION MACHINES: Classification of AC Motors, Construction & Types, Working Principle, Production of Rotating Magnetic Field, Synchronous Speed, Slip, Frequency of Rotor Current, Torque, Torque/Slip Characteristics, Power Stages, No Load & Blocked Rotor Tests, Phasor Diagram, Equivalent Circuit, Circle Diagram & Determination of Performance Parameters, Deep Bar & Double Cage Induction Motors, Starters For 3-Phase Induction Motors, Methods of Speed Control, Harmonics & its Effects, Cogging & Crawling, Testing of Induction Motor as per IS, Energy Efficient Induction Motors, Induction Generators.

UNIT II 14 : Construction, Types, Operating Principle, Generated EMF, Terms Related to AC Armature Winding, Pitch & Distribution Factors, Effect of Harmonics on Induced EMF, Operation on Load, Phasor Diagrams, Power Output Equation, Armature Reaction, SCR of an Alternator. Voltage Regulation, Determination of Voltage Regulation by Direct Loading, Synchronous Impedance, MMF & ZPF Methods, Two Reaction Theory, Parallel Operation, Operation on Infinite Bus, Synchronizing of Alternators & Methods of Synchronization, Slip Test, Hunting of Synchronous Machines & Its Prevention.

UNIT III 08 SYNCHRONOUS MOTOR: Construction, Operating Principle, Phasor Diagrams, Starting Methods, Effect of Varying Field Current at Different Loads, V-Curves, Hunting & Damping, Synchronous Condenser, Power Developed by Synchronous Motor & Stability.

Page 20 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch

UNIT IV 12 SINGLE PHASE INDUCTION MOTORS: Types of Single Phase Motors, Double Field Revolving Theory, Methods of Starting, Equivalent Circuit, No Load & Blocked Rotor Tests, Determination of Equivalent Circuit Parameters, Performance Calculations.

SPECIAL PURPOSE MOTORS: Universal Motor, Single Phase AC Series Motor, Repulsion Motor, Stepper Motors, Permanent Magnet DC Motors, Brushless DC Motors.

Self-study: The self- study contents will be declared at the commencement of semester.

TOTAL HOURS 52 Texts and References: 1 D. P. Kothari and I. J. Nagrath, “ Electric Machines ”, Tata McGraw Hill. 2 Ashfaq Hussain, “ Electric Machines ”, Dhanpat Raiand Co. 3 P. S. Bimbhra, “ Electrical Machinery ”, Khanna Publishers. 4 P. S. Bimbhra, “ Generalized Theory of Electrical Machines ”, Khanna Publishers. 5 M. G. Say, “ Machines ”, Pitman and Sons 6 J. B. Gupta, “ Theory and Performance of Electrical Machines ”, S.K.KatariaandSons. 7 J. G. Jamnani, “Electrical Machines” , Mahajan Publishing House 8 Fitzgerald A.E and Kingsley, Electrical Machinery, Tata McGraw Hill

Page 21 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch Semester IV Course Code: 18EE 217P Course: ELECTRICAL MACHINES-II LABORATORY Teaching Scheme Examination Scheme Theory Practical Total L T P C Hrs/Week MS ES IA LW LE /Viva Marks -- -- 2 1 2 ------50 50 100

List of Experiments:

1. To understand the construction and operation of 3-phase induction machine by working cut section. 2. To determine equivalent circuit parameters of a 3-phase induction motor by No load and Blocked rotor test. 3. To determine performance characteristics of 3-phase induction motor using circle diagram. 4. To perform load test on a three phase induction motor. 5. To study different types of starters used for 3-phase induction motors. 6. To determine equivalent circuit parameters of a single phase induction motor by No load and Blocked rotor test. 7. To study starting methods of a single phase induction motor. 8. To perform load test on single phase induction motor. 9. To determine the regulation of an alternator by direct loading method. 10. To determine the regulation of an alternator by synchronous impedance method. 11. To determine the regulation of an alternator by MMF method. 12. To determine the regulation of an alternator by Z.P.F. method. 13. Synchronization of two 3-phase alternators with common bus bars by various methods. 14. To plot `V' curve of the three phase synchronous motor. 15. To determine direct and quadrature axis reactance of a salient pole alternator by slip test. 16. To understand the construction, operating characteristics and speed control of Universal motor. 17. To understand the construction, operating characteristics and speed control of Repulsion motor. 18. To understand the construction, operating characteristics and speed control of PMDC motor.

Page 22 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch Semester IV Course Code: 18EE 218P Course: ANALOG AND DIGITAL ELECTRONICS LABORATORY Teaching Scheme Examination Scheme Theory Practical Total L T P C Hrs/Week MS ES IA LW LE /Viva Marks -- -- 2 1 2 ------50 50 100 List of Experiments: 1 Observing Open-Loop Gain of an Operational Amplifier as a function of frequency and measuring Common Mode Rejection Ratio. 2 To Study Operational Amplifier as Inverting and Non Inverting Amplifier, Voltage Comparator, Integrator and Differentiator. 3 To Study Active Low Pass Filters, Active High Pass Filter, Active Band Pass Filter using Op-Amp. 4 To Study Astable, Mono-stable and Free Running Multi-vibrators using IC 555. 5 To Study Laws and Theorems of Boolean algebra. 6 Study of Logic Gates and Verification of truth tables of Logic gates Using Universal gates (NAND and NOR gates). 7 To verify followings A. Study and verify truth Table of Binary Half Adder B. To study and verify Truth Table of Binary Full Adder (using two half adders). C. Study and verify Truth Table of Binary Half Subtractor 8 Study of Parity Generator/Checker. 9 To study and verify the code conversion circuits. A. Gray to Binary Converter and Binary to Gray Converter B. Studying and verifying BCD to Excess-3 code conversion circuit and prove Truth Table. 10 To verify followings A. To study 4 To 1 Line Multiplexer and 1 To 4 Line De-Multiplexer B. To verify their Truth Table. 11 Study of Encoder and Decoder Circuits A. To study and verify the Truth Table of 8-to-3 Line Encoder. B. To study and verify the Truth Table of 3-to-8 Line Decoder 12 Study of Various types of Flip Flop. 13 Study of Left Right and Programmable Shift Register. A. Study of 4-bit serial in serial out shift register. B. Study of 4-bit serial in parallel out shift register. C. Study of 4-bit parallel in-serial out shift register. D. Study of 4-bit parallel in parallel out shift register. 14 Study of 4 Bit Counters (Synchronous and Asynchronous). A. Study of 4-bit Synchronous Binary up Counter. B. Study of 4-bit Asynchronous Binary up/down counter. 15 Study and verification of Diode VI Characteristics. 16 Application of Diode as Clipper and Clamper Circuits. 17 Conversion of A.C. to DC using Diode Rectifier Circuits. 18 Study and verification of Transistor in CB and CE configuration (Input and Output Characteristics). 19 Importance of Biasing of Transistor. 20 Study and experimental verification of Hartley Oscillator and Colpitts Oscillator.

Page 23 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch Semester IV Course Code: 18EE 219P Course: CONTROL THEORY LABORATORY Teaching Scheme Examination Scheme Theory Practical Total L T P C Hrs/Week MS ES IA LW LE /Viva Marks -- -- 2 1 2 ------50 50 100

List of Experiments:

1 Introduction to Mathematical software-Application in Control Theory. 2 To study Mathematical Modeling of various physical systems such as Coupled tank and Quadruple tank process. 3 To study transient and steady state response of coupled tank system using open loop experimental runs and verify them using open loop simulation . 4 To find Time constant and Steady state gain of Single Board Heating system. 5 To find over all Transfer Function using block diagram and signal flow graphs. 6 To study stability analysis using Root locus. 7 To study stability analysis using Bode plot. 8 To study stability analysis using Polar and Nyquist plots. 9 Mathematical modeling using State Space Technique. 10 To check controllability and observability of linear system.

Page 24 of 24

Approved– BOS May 2018 (w.e.f A.Y 2018-19) 2017 Batch