Laboratory Plastics

Total Page:16

File Type:pdf, Size:1020Kb

Laboratory Plastics LABORATORY PLASTICS Supporting your clinical and life science applications Contents Key Terms Bags ABS Acrylonitrile Butadiene Styrene 4 Autoclave Bags EtO Ethylene Oxide 4 Specimen Bags HDPE High Density Polyethylene Bottles LDPE Low Density Polyethylene 5 Wash Bottles PP Polypropylene 9 Graduated Bottles Chemical resistance of the polymers Containers Good resistance to a range of laboratory chemicals 10 Primary Urine Tubes including acids, bases and some solvents. 10 Sample containers 13 Dippers Autoclaving 14 Bioreactor Flask Products that are autoclavable are identified by 15 Ice Buckets an autoclave symbol in this catalogue. 16 Inoculating Loops and Spreader Pipettes 17 Pasteur Pipettes 18 Serological Pipettes 19 Pipette Fillers Tubes 20 Test Tube Racks 20 Centrifuge Tubes Vials 21 Cryogenic Vials 23 Weighing Boats 2 DWK LIFE SCIENCES LABORATORY PLASTICS Supporting your clinical and life science applications High-quality laboratory plastic products for sample management and processing applications in the healthcare and life science markets Key Benefits The DWK Life Sciences name is synonymous with quality product for Quality use in the scientific sector, including renowned glassware brands PYREX®, • ISO 13485 accredited manufacturer DURAN®, KIMBLE® QUICKFIT® and MBL®, and the AZLON® reusable plastic • Manufactured from virgin raw material labware range. As an ISO 13485 accredited manufacturer we have a • Materials denote recycling codes commitment to continuous product improvement ensuring all product where applicable is manufactured to the high quality our customers expect. Safety • Relevant product CE marked in The WHEATON® range of plastic products for use in clinical and life science accordance with 98/79/EC applications is a valuable part of the DWK portfolio, consisting of patient • Leakproof performance sample containers and serological pipettes to autoclave bags for safe biological waste disposal and the novel CELLline flask, offering innovative technology Variety for antibody, viral, protein and cell culture applications. Where applicable, • Extensive range for all your sample product is CE marked in accordance with the European Directive 98/79/EC. management needs 3 BAGS WHEATON® HIGH TEMPERATURE AUTOCLAVE BAGS l Ideal for the disposal of all biological waste in autoclaves or incinerators l Manufactured from strong polypropylene l Suitable for use up to 135°C l Uniform wall thickness and seamless bottom, designed to ensure high pressure bearing l Printed with blue bio-hazard labelling specifically designed for contaminated waste disposal Inner Width Case Product Code Description Length Pack (mm) Qty. Qty. High Temperature Autoclave Bag, 370100 310 660mm 50 200 Printed, 310 x 660mm High Temperature Autoclave Bag, 370110 415 600mm 50 200 Printed, 415 x 600mm High Temperature Autoclave Bag, 370120 610 810mm 50 200 Printed, 610 x 810mm WHEATON® SPECIMEN BAGS WITH DOCUMENT WALLETS l Specimen bags with document wallets are manufactured from LDPE l Designed for the safe transportation of samples and documents l The grip seal bag holds the sample with the attached separate document wallet used for paperwork to avoid possible contamination of documents l Available plain or printed with biohazard symbol Width x Inner Product Bag Case Description Label Length Pack Code Material Qty. (mm) Qty. Specimen Bag with Document 370150 Wallet and Biohazard Label, Biohazard 150 x 150 LDPE 100 1000 150 x 200mm Specimen Bag with Document 370155 Wallet and Biohazard Label, Biohazard 150 x 220 LDPE 50 1000 150 x 225mm Specimen Bag with Document 370160 Plain 150 x 150 LDPE 100 1000 Wallet, 150 x 200mm Specimen Bag with Document 370170 Plain 150 x 220 LDPE 50 1000 Wallet, 150 x 225mm 4 BOTTLES AZLON® DIY SAFETY VENTING WASH BOTTLES l Do-it-yourself DripLok® wash bottles with blank write-on-panel l Indelibly printed in three languages – English, French and German l Supplied with adhesive hazard labels Product Code Description Cap Type Pack Qty. WGW001VTML 250ml Custom/DIY with white cap Vapour-venting 5 WGW002VTML 500ml Custom/DIY with white cap Vapour-venting 5 WGW020VTML 1000ml Custom/DIY with white cap Vapour-venting 5 Indelible black marker pen for WGWPEN01 ~ 2 custom/DIY wash bottles 500ml Custom/DIY with mixed WGW004VTML Vapour-venting 5 colour caps WGW001PML 250ml Custom/DIY with white cap Non-venting 5 WGW002PML 500ml Custom/DIY with white cap Non-venting 5 WGW020PML 1000ml Custom/DIY with white cap Non-venting 5 For dispensing use only. Not for liquid storage. The Azlon portfolio offers one of the widest ranges of wash bottles on the market. For access to the full range please visit DWKLtd.com 5 AZLON® WASH BOTTLE, AUTOCLAVABLE, PP l Autoclavable at 121°C l Polypropylene bottle fiitted with one-piece polypropylene closure l Closures feature precision jet-tip aperture for fine control , non-venting Product Code Capacity (ml) Print Label Closure Colour Pack Qty. WGW700PP 500 Autoclavable White 5 For dispensing use only. Not for liquid storage. Caution. When autoclaving bottles always ensure the caps are completely loosened or removed to prevent accidental implosion. Do not autoclave if containing solvents or hazardous/reactive solutions or substances. AZLON® WASH BOTTLE, LDPE, BLEACH l Multi-lingual wide neck wash bottle , non-venting l Opaque white LDPE for light sensitive sodium hypochlorite / bleach l Indelibly printed in three languages – English, French and Spanish l Features the new Globally Harmonised Symbols, NFPA diamond, risk phrases and safety information l Fitted with colour coded one-piece yellow PP closure l Closure features precision jet-tip aperture for fine control Product Code Capacity (ml) Print Label Closure Colour Pack Qty. Sodium WGW401PML 500 Yellow 5 Hypochlorite For dispensing use only. Not for liquid storage. 6 AZLON® CLASSIC STYLE, NARROW NECK WASH BOTTLES l Traditional and popular square shoulder round wash bottles l Fitted with one-piece PP closures that maintain their shape in use l Closures feature precision jet-tip aperture for fine control Product Code Capacity (ml) Closure Colour Pack Qty. WGF230P 250 White 5 WGF236P 500 White 5 For dispensing use only. Not for liquid storage. AZLON® PRINTED, SLOPE SHOULDER WASH BOTTLES l Labelled wash bottles for easy identification of contents l Indelibly printed with a choice of seven popular laboratory solvents, appropriate hazard symbols and CAS numbers l Slim design enables comfortable handling and enhanced ease of use l Fitted with colour-coded polypropylene closures l Closures feature precision jet-tip aperture for fine control Print / Closure Product Code Capacity (ml) Printed Pack Qty. Colour WGF530P 250 Water White 5 WGF600P 250 Distilled water White 5 WGF531P 250 Acetone Red 5 WGF532P 250 Methanol Green 5 WGF533P 250 Isopropanol Blue 5 WGF534P 250 I.M.S. Yellow 5 WGF535P 250 Ethanol Orange 5 WGF536P 500 Water White 5 WGF601P 500 Distilled water White 5 WGF537P 500 Acetone Red 5 WGF538P 500 Methanol Green 5 WGF539P 500 Isopropanol Blue 5 WGF540P 500 I.M.S Yellow 5 WGF541P 500 Ethanol Orange 5 For dispensing use only. Not for liquid storage. 7 AZLON® GRAM STAIN WASH BOTTLES l Pre-labelled with Gram stain solutions, hazard warning labels and instructions for use l With patented DripLok® vapour venting technology l The set of five wash bottles are printed with: – Crystal violet solution – Lugol’s iodine solution – Gram iodine solution – Gram colour/de-colourising solution – Safranin solution Product Code Description Pack Qty. WGW0255V Set of five 250ml Gram Stain venting wash bottles 5 For dispensing use only. Not for liquid storage. AZLON® MULTILINGUAL VENTED ROUND INTEGRAL WASH BOTTLE l Multilingual, wide neck wash bottle l 500ml capacity l Indelibly printed in English, French, German and Spanish l Choose from five solvent labels all including the new Globally Harmonised Symbols, NFPA diamond, risk phrases and safety information l Colour coded vented cap with PTFE membrane l Designed with integral spout to prevent contamination Product Code Capacity (ml) Print Label Closure Colour Pack Qty. WGW801P 500 Distilled Water White 5 WGW802P 500 Acetone Red 5 WGW803P 500 Methanol Green 5 WGW804P 500 Isopropanol Blue 5 WGW805P 500 Ethanol Orange 5 For dispensing use only. Not for liquid storage. 8 AZLON® WIDE NECK WASH BOTTLES, VENTED l Square shoulder wash bottles featuring a wide neck for easy spill-free filling and the patented DripLok® vapour venting valve that prevents solvent drips l Fitted with colour-coded one-piece PP closures that maintain their shape in use l Closures feature precision jet-tip aperture for fine control Product Code Capacity (ml) Closure Colour Pack Qty. WGW236PVENT 500 White 5 WGW237PVENT 500 Red 5 WGW238PVENT 500 Yellow 5 WGW239PVENT 500 Green 5 WGW235PVENT 500 Blue 5 WGW234PVENT 500 Orange 5 WGW443VT 1000 White 5 WGW444VT 1000 Yellow 5 WGW445VT 1000 Red 5 WGW446VT 1000 Blue 5 WGW447VT 1000 Green 5 WGW448VT 1000 Orange 5 For dispensing use only. Not for liquid storage. AZLON® GRADUATED BOTTLE, POLYPROPYLENE l Translucent polypropylene bottles with good chemical resistance l Leak-proof, liner-less design l Clear crisp printed graduations show millilitres and fluid ounces l Printed with large white write-on-panel for easy labelling l Smooth inner contour for efficient pouring and ease of cleaning l Batch certificate available to download online l Suitable for food contact applications in accordance with EU and U.S. FDA regulations l Ideal for both liquids and solids, perfect for microbiological sampling l Autoclavable at 121°C Neck
Recommended publications
  • Laboratory Equipment Reference Sheet
    Laboratory Equipment Stirring Rod: Reference Sheet: Iron Ring: Description: Glass rod. Uses: To stir combinations; To use in pouring liquids. Evaporating Dish: Description: Iron ring with a screw fastener; Several Sizes Uses: To fasten to the ring stand as a support for an apparatus Description: Porcelain dish. Buret Clamp/Test Tube Clamp: Uses: As a container for small amounts of liquids being evaporated. Glass Plate: Description: Metal clamp with a screw fastener, swivel and lock nut, adjusting screw, and a curved clamp. Uses: To hold an apparatus; May be fastened to a ring stand. Mortar and Pestle: Description: Thick glass. Uses: Many uses; Should not be heated Description: Heavy porcelain dish with a grinder. Watch Glass: Uses: To grind chemicals to a powder. Spatula: Description: Curved glass. Uses: May be used as a beaker cover; May be used in evaporating very small amounts of Description: Made of metal or porcelain. liquid. Uses: To transfer solid chemicals in weighing. Funnel: Triangular File: Description: Metal file with three cutting edges. Uses: To scratch glass or file. Rubber Connector: Description: Glass or plastic. Uses: To hold filter paper; May be used in pouring Description: Short length of tubing. Medicine Dropper: Uses: To connect parts of an apparatus. Pinch Clamp: Description: Glass tip with a rubber bulb. Uses: To transfer small amounts of liquid. Forceps: Description: Metal clamp with finger grips. Uses: To clamp a rubber connector. Test Tube Rack: Description: Metal Uses: To pick up or hold small objects. Beaker: Description: Rack; May be wood, metal, or plastic. Uses: To hold test tubes in an upright position.
    [Show full text]
  • Rhodamine B Lipase/Esterase Agar
    ALKEN-MURRAY CORPORATION TI TLE: RHODA M INE B A GA R NO. QC-99 PREPARA TI ON PROCEDURE MICROBIOLOGICAL DIVISION QUALITY CONTROL REV : 3 PAGE 1 OF 4 ALKEN-MURRAY CORPORATION P. O. Box 400, New Hyde Park, NY 11040 TELEPHONE 540-636-1236 - Fax 540-636-1770 QUALITY CONTROL METHOD - 99 Preparation and Use of Rhodamine B Lipase Agar Description: This quality control procedure is designed to verify that Rhodamine B Agar is properly prepared, used and stored. This procedure demonstrates the ability of some bacteria to produce lipase and degrade food oils, such as olive oil, in a clear and easily interpreted manner. We found that the Spirit Blue method (QC-94) was harder to interpret, leading to misinterpreted results. This procedure should be performed by a trained laboratory technician. Ingredients: For lipoidal emulsion (50 ml per 450 ml of base medium) - enough lipoidal emulsion for 1 liter: Olive oil 30 ml Tween 80 250 µl Distilled water 50 ml 1 Rhodamine B 20 mg/20 ml sterile water (0.02% w/v total media prepared) 1. Add filter sterilized Rhodamine B solution, after autoclaving other ingredients For base medium: Nutrient Broth 4.5 g (alternate Peptone water) Yeast extract 1.25 g Agar 10 g Distilled water 450 ml Final pH 7.0 ± 0.2 Equipment and Supplies: 500 ml Graduated cylinder 50 ml Graduated cylinder 1 ml sterile syringe with 18 gauge needle 10 ml sterile syringe with 18 gauge needle 10 ml sterile serological pipet Drummond Pipet-Aid® or rubber bulb 2 - 50 ml sterile serological pipets ALKEN-MURRAY CORPORATION TI TLE: RHODA M INE B A GA R NO.
    [Show full text]
  • Pipette Resource Guide
    PIPETTE RESOURCE GUIDE What to Know Before Buying Pipettes Time to Upgrade? Benefits of Electronic Pipettes A Guide to Proper Pipetting Tips for Ergonomic Pipette Use and Tips for Low-Volume Pipetting Featured Manufacturers Pipette Resource Guide How does the volume of samples being worked What to Know with influence which pipette is the best fit? Pipetting for high-throughput applications involves using your Before Buying thumb over and over again to push down on and release the piston on the pipette and then to eject the pipette tip. This Pipettes repeated movement can result in repetitive strain injuries. If your application requires a large amount of pipetting, consider Pipettes are used for the accurate transfer of liquids in the investing in an electronic pipette. These pipettes contain a motor preparation of reactions, experiments, and other solutions. These that precisely regulates aspiration and dispensing rates with handheld instruments are one of the most frequently used tools push-button functionality, limiting the force that must be exerted in the lab and you should consider ergonomics and the comfort by the user’s thumb to perform a pipetting task. They have the of your workers when purchasing. The right pipette can also help added advantage of reducing measurement error in experiments optimize your lab’s productivity. with many samples and replicates. What volume of samples will you be pipetting? Maintenance Tip Pipettes are specifically tailored to aspirate and dispense within certain volume ranges. It’s important to stay within the pipette’s Right out of the box, verify that your new volume range to prevent damage to the instrument.
    [Show full text]
  • Oxidation of 9-Fluorenol to 9-Fluorenone with Sodium Hypochlorite
    CHEM 2229 EXP 1: Oxidation of 9-Fluorenol to 9-Fluorenone with Sodium Hypochlorite Objective: In this experiment you will learn how to perform an oxidation reaction by oxidizing an alcohol (9- hydroxyfluorene) to a ketone (9-fluorenone) using sodium hypochlorite in an acidic environment; how to perform TLC to monitor a reaction; how to perform an extraction to isolate a product; and, how to verify purity of a product using TLC and melting point. * Chromatography is a useful method for separating components of a mixture of compounds based on their polarity. Thin layer chromatography is especially useful for determining the number of components in a mixture, the identity of the compounds, and the purity of a compound. **Solvent Extraction is also known as Liquid–liquid extraction (LLE) or partitioning. It is a method used to separate compounds based on their relative solubilities in two different immiscible liquids: usually the polar solvent water and a non-polar organic solvent. Immiscible means that the liquids do not mix and because of this form two distinct layers. ***The melting point (MP) is a physical property of a solid also used for the purpose of identification and purity determination. Reading Assignment: OCLT: OCLT, pp. 83-108 (chromatography generalities & TLC), pp. 368-369 (TLC technique summary), pp. 203-246 (extraction); pp. 376-381 (extraction illustrations); 366 (vacuum filtration); and 309-315 (melting point). Solomons Organic Chemistry, 12th ed. (Note: Pages correspond to 12th ed.) pp. 542-547 (12.4 Oxidation of Alcohols) Concepts: Acids, Bases, Decantation, Drying Agents, Exothermic Reactions, Extraction, Half Cell Method, Oxidation/Reduction, Oxidizing Agents, Reducing Agents, Reflux, Salting Out Chemicals: acetic acid (glacial), acetone, 9-fluorenol, 9-fluorenone, hexane, sodium bicarbonate, sodium chloride, sodium hypochlorite (aq soln) / bleach, sodium sulfate Safety Precautions: Wear chemical splash-proof goggles and appropriate attire at all times.
    [Show full text]
  • Determination of Kinematic Viscosity of Different Biodiesel Fuels at Various Temperatures
    DETERMINATION OF KINEMATIC VISCOSITY OF DIFFERENT BIODIESEL FUELS AT VARIOUS TEMPERATURES. A THESIS SUBMITTED TO THE GRADUATE SCHOOL OF APPLIED SCIENCES OF NEAR EAST UNIVERSITY by IBUKUN OLUWOYE In Partial Fulfillment of the Requirements for the Degree of Master of Science in Mechanical Engineering NICOSIA 2013 Ibukun Oluwoye: DETERMINATION OF KINEMATIC VISCOSITY OF DIFFERENT BIODIESEL FUELS AT VARIOUS TEMPERATURES. Approval of Director of Graduate School of Applied Sciences Prof. Dr. I˙lkay SALI˙HO ĞLU We certify that this thesis is satisfactory for the award of the degree of Master of Science in Mechanical Engineering Examining Committee in Charge: DECLARATION I hereby declare that all information in this document has been obtained and presented in accordance with academic rules and ethical conduct. I also declare that, as required by these rules and conduct, I have fully cited and referenced all material and results that are not original to this work. Name: Ibukun Oluwoye Signature: Date: i ABSTRACT Fatty acid composition has a significant effect on the viscosities of fats and oils and in turn biodiesel fuels. The fatty acid composition of fats and oils are feedstock dependent and are also affected by factors such as climatic conditions, soil type, and plant health and maturity upon harvest. Due to the reasons mentioned, there is a need to determined major fuel properties locally for biodiesel samples. The viscosity of five biodiesel fuel in Northern Cyprus are measured up to temperature 140˚C; temperature just above the flash point of biodiesel fuel proposed by ASTM. The temperature – viscosity relationship was determined together with temperature – mixing percentages composition relationship Keyword: Fuel, Biofuels, Biodiesel, Viscosity, Density, Green Energy, Frying Oil, Canola Oil ii ACKNOWLEDGEMENTS Firstly, my sincere appreciation is to God for the gift of life and balances in which all ingenuity is defined in me.
    [Show full text]
  • A Pipette Method of Mechanical Analysis of Soils Based on Im- Proved Dispersion Procedure
    TECHNICAL BULLETIN NO. 170 JANUARY, 1930 UNITED STATES DEPARTMENT OF AGRICULTURE WASHINGTON, D. C. A PIPETTE METHOD OF MECHANICAL ANALYSIS OF SOILS BASED ON IM- PROVED DISPERSION PROCEDURE By L. B. OLMSTEAD, Physicist^ LYLE T. ALEXANDER, Junior Physicist, and H. E. MiDDLETON, Associate Physicistj Division of Soil Chemistry and Physics, Soil Investigations^ Bureau of Chemistry and Soils ^ CONTENTS Page Introduction 1 Outline of method _ 14 Dispersion _ 3 General statement 14 Hydrogen peroxide treatment— 3 Preparation and dispersion of sample 15 Acid treatment—. 5 Separation into size classes 15 Washing 9 Calculation of results _.- 18 Dispersing agents 9 Apparatus _ 19 Electrodialysis--. 11 Summary 20 Shaking .-. 11 Literature cited 21 Separation into size classes 12 Size classes employed 12 Method of separation 13 Sedimentation velocity and particle size. 13 INTRODUCTION In all methods of mechanical soil analysis some separations are based on the well-known fact that the smaller particles in water suspensions fall more slowly than larger ones. In elutriation methods the smaller particles are borne upward by a rising water column while larger particles fall. In the early work of the Bureau of Soils the Osborne (20y beaker method was used to make silt and clay separations. Whitney (5) apparently was the first to use the centri- fuge to increase the settling velocities of soil particles. The centri- fuge method was then worked out independently by Hopkins (12) and Snyder (27), In 1904 the Bureau of Soils published its centri- fuge method (5)j which with modifications (9) has been used until recently. The centrifuge method was much more rapid than the beaker method and gave better dispersion than elutriation methods.
    [Show full text]
  • Laboratory Equipment AP
    \ \\ , f ?7-\ Watch glass 1 Crucible and cover Evaporating dish Pneumatlo trough Beaker Safety goggles Florence Wide-mouth0 Plastic wash Dropper Funnel flask collecting bottle pipet Edenmeyer Rubber stoppers bottle flask € ....... ">. ÿ ,, Glass rod with niohrome wire Scoopula (for flame re,sting) CruoiNe tongs Rubber ubing '1 ,v .... Test-tube brush square Wire gau ÿ "\ file Burner " Tripod Florence flask: glass; common sizes are 125 mL, 250 mL, 500 .d Beaker: glass or plastic; common sizes are 50 mL, mL; maybe heated; used in making and for storing solutions. 100 mL, 250 mL, 400 mL; glass beakers maybe heated. oÿ Buret: glass; common sizes are 25 mL and 50 mL; used to Forceps: metal; used to hold or pick up small objects. Funnel: glass or plastic; common size holds 12.5-cm diameter measure volumes of solutions in titrafions. Ceramic square: used under hot apparatus or glassware. filter paper. Gas burner: constructed of metal; connected to a gas supply Clamps" the following types of clamps may be fastened to with rubber tubing; used to heat chemicals (dry or in solution) support apparatus: buret/test-tube clamp, clamp holder, double buret clamp, ring clamp, 3-pronged jaw clamp. in beakers, test tubes, and crucibles. Gas collecting tube: glass; marked in mL intervals; used to 3: Clay triangle: wire frame with porcelain supports; used to o} support a crucible. measure gas volumes. Glass rod with nichrome wire: used in flame tests. Condenser: glass; used in distillation procedures. Q. Crucible and cover: porcelain; used to heat small amounts of Graduated cylinder: glass or plastic; common sizes are 10 mL, 50 mL, 100 mL; used to measure approximate volumes; must solid substances at high temperatures.
    [Show full text]
  • Lab Equipment Beaker
    Lab Equipment Beaker Beakers hold solids or liquids that will not release gases when reacted or are unlikely to splatter if stirred or heated. They come in a variety of sizes and the measurements on them are a guideline only. They are very inaccurate! Erlenmeyer Flask Erlenmeyer flasks hold solids or liquids that may release gases during a reaction or that are likely to splatter if stirred or heated. Volumetric Flask Volumetric Flasks are very accurate containers that are used to make solutions of a very precise concentration. They come in a wide variety of sizes. Solutions should never be stored in a volumetric flask, just prepared in them. Büchner Funnel A Büchner funnel is a piece of laboratory equipment which is used to filter or separate a solid from a liquid. It allows the solid to be dried faster than simply using a filter paper over a beaker as the vacuum aids in removing water. Graduated Cylinder A graduated cylinder is used to measure volumes of liquids. The are accurate to 1 decimal place. What’s the purpose of the yellow band at the top? Test Tubes 13 x 100 mm test tubes 10 x 75 mm test tubes Test Tube Holder A test tube holder is useful for holding a test tube which is too hot to handle. Test Tube Brushes Test tube brushes are used to clean test tubes and graduated cylinders. Forcing a large brush into a small test tube will often break the tube. Test Tube Racks Test tube racks are for holding and organizing test tubes on the laboratory counter.
    [Show full text]
  • United States Department of the Interior, J. A. Krug, Secretary Fish
    . United States Department of the I nterior, J. A. Krug , Secretary Fish and Wildli fe Service , Albert M. Day , Dir ector ** ******** Fi shery Leafle t 138 Washi ngton 25, D. C. Reissued June 1948 • • SOME TIME AND LABOR SAVING TECHNIQUES IN VI TAMI N A AND OIL ANALYSES By F. B. Sanford*, G. C. Bucher**, and W. Clegg* I n the course of an ext ens ive study of the factors affecting the potency of the dog­ fish l i ver oils, made in collaboration with the Washington State Fisheries, there were de­ veloped a numb er of time and labor saving techniques such 8S are discussed by Bjorksten!!. These ma y prove of interest ~o other laboratories in the oil and vitamin f ields. Use of · Mal ted Milk Mixer--Li ver homogenization has been made easy by means of a blender. However, wi th these machines it is difficult to handle livers weighing l ess t han one ounce. because the blades of the blender do not engage the liver. In this case, a malted milk mixer becomes valuable. Even small fetal livers can be homogenized by its use. An­ other advantage is that small liver samples can be. disintegrated while in their 'original containers. If insufficient cutting is obtained with the agitators furnished with the mixer, they can be replaced by cutters of almost any size and shape made from hacksaw blades sharpened on one edge. (Figure 1) Weighing Wires-- The advantage of weighing wires in handling the small quantities of oil usually em­ '::::..~~ ~..:--. ployed in Vitamin A analyses has been known for some time.
    [Show full text]
  • Lab Equipment Lab Equipment
    Lab Equipment Lab Equipment Your lab equipment should: 1. Be CLEAN before using it. 2. Be CHECKED (if glassware) for cracks, broken edges, and “stars”– discard anything damaged. Pre-AP Chemistry Charles Page High School 3. Be washed, dried, and carefully stored in the Stephen L. Cotton proper place after using it. Cleaning Supplies 1. Each lab station has plenty of paper towels, soap, water, sponge and a sink. (2 sinks are also located on the east wall desktop) 2. Used for cleaning lab equipment, the table top, and to wash your hands when finished. 3. We have floor brooms, table brushes, and dustpans to clean up any spills. Keep our lab area neat and clean! Beakers hold and/or heat solids or liquids Beaker Use this Broken Glass that will not release box to dispose of any gases when reacted, or are unlikely to broken glass, instead splatter if stirred. of the trash can. Very poor item to measure volume with (+/- 5% error!) Note the total size There are six sizes of beakers in capacity = 250 mL your lab table for you to use: (upper mark is 200 mL) 50, 100, 150, 250, 400, & 600 mL 1 Beaker Tongs Beaker tongs are used to hold Erlenmeyer Flask and move beakers Erlenmeyer flasks containing hot hold and/or heat liquids. solids or liquids that may release Note the rubber gases during a coating to reaction, or that are improve grip on likely to splatter if the glass beaker stirred. - do not hold these in a burner flame. Note the size = 125 mL Florence Flask Flask Tongs Rarely used in first year chemistry, it is used for the mixing of chemicals.
    [Show full text]
  • Microbiology II-99
    Protocoll-Mari 1/24 15.02.01 Microbiology II-99 Selected experiments for advanced Microbiology Protocol Nov 8th till 13th 1999 Headed by: Prof. Dr. H. Stan-Lotter Tutors: Michaela Eder Renate Marschon Handed by : Maricela Yip Salzburg, December 13th, 1999 Protocoll-Mari 2/24 15.02.01 Table of Contents Page Introduction Sterilization and Aseptic Techniques..................... 3 Experiment 1 Bacteria in natural Biotopes Bacterial sample from the Human Body................ 4 Bacterial sample from water................................. 5 Bacterial sample from the Air................................ 7 Experiment 2 Microbes in untreated samples of Milk I............... Medium broth to promote bacterial growth........... 9 Dilution series of raw milk sample........................ 9 Discussion.............................................................. 10 Experiment 3 Microbes in untreated samples of Milk II Bacterial proliferation in a sample of raw milk over a period of several days................................. 11 Experiment 4 Relation of free oxygen and microbial growth I Relation of oxygen concentration in a solid medium to types of microbial growth.................... 12 Experiment 5 Relation of free oxygen and microbial growth II Relation of oxygen concentration in a solid medium to types of microbial growth.................... 13 Discussion.............................................................. 14 Experiment 6 Extremophile Microbes Cultivation, growth, and examination of a thermo-acidophile Archae-bacterium....................
    [Show full text]
  • Delineation of Background Laboratory Contamination in the Analysis Of
    U.S. DEPARTMENT OF THE INTERIOR U.S. GEOLOGICAL SURVEY DELINEATION OF BACKGROUND LABORATORY CONTAMINATION IN THE ANALYSIS OF TRACE CONCENTRATIONS OF EXTRACTABLE ORGANIC MATERIALS IN CRYSTALLINE ROCKS BY SOXHLET EXTRACTION, COLUMN CHROMOTOGRAPHY, AND GAS CHROMATOGRAPHY By Koichi Mimura1 and Leigh C. Price2 Open-File Report 99-335 1999 This report is preliminary and has not been reviewed for conformity with U.S. Geological Survey editorial standards. Use of brand or trade names in this report are for descriptive purposes only and do not imply either endorsement or non-endorsement by the U.S. Government. Department of Earth and Planetary Sciences, Nagoya University, Nagoya, 464-01, Japan 2U.S. Geological Survey, Denver Federal Center Denver, CO 80225, USA 1.0 Abstract.................................................................................... 2 2.0 Introduction................................................................................. 2 3.0 Analytical Method......................................................................... 3 4.0 Contamination Checks..................................................................... 5 4.1 Solvents................................................................................ 5 4.11 Dichloromethane............................................................ 6 4.12 Hexane....................................................................... 11 4.13 Benzene...................................................................... 14 4.14 Benzene Methanol.........................................................
    [Show full text]