83 Pgs 84- 95 Body Pgs 96

Chassis Wiper pgs 01 - 83 pgs 164 - 172

Ford...... 49-57 Grumman / Morgan Olson...... 164-165 Freightliner...... 58-80 Union City Body Company...... 168 GM / Workhorse...... 8-48 Utilimaster...... 166-167 International...... 81-82 Wiper Parts by Type...... 169-172 Body Mirrors pgs 84- 95 pgs 173 - 180

Bumpers...... 2-6 Crossview Mirrors...... 180 Grumman / Morgan Olson...... 84-87 Velvac Dual Head...... 174-175 Union City Body Company...... 90-91 Velvac 2020 & 2025...... 176-177 Utilimaster...... 88-89 Velvac VMax...... 178 Supreme Body...... 90 Rosco Accustyle...... 179 West Coast...... 173 Door Hardware Lights pgs 96 - 115 pgs 181 - 199 Bulkhead Door...... 112-113 Paddle Latches...... 114-115 Incandescent...... 193-197 Rear Door Hardware...... 105-110 LED...... 182-193 Side Door Hardware...... 100-104 Reflectors...... 199 Windows, & Parts...... 96-98 Work Lights...... 181 Roll Up Door Electrical pgs 116 - 133 pgs 200 - 212 Complete Door Replacement...... 116-124 Dover & Diamond...... 133 Audio Systems...... 202 Shutter Doors...... 122 Rear View Backup Cameras...... 200-201 Todco...... 125-129 Switches...... 203-208 Whiting...... 130-132 Trailer Connectors...... 212 Seating pgs 134 - 138 Safety pgs 213 - 215 Driver's Seating...... 134-135 Passenger Seating...... 136-138 Anti-Slip Tape...... 214 Backup Alarms...... 213 Cargo Control...... 214-215 Heating & A/C Wheel Chocks...... 213 pgs 139 - 163

Auxiliary Heaters...... 139-140 Grumman / Morgan Olson...... 141-146 Keep Updated at Heater Parts by Type...... 154-161 Union City Body Company...... 147-148 MillSupply.com Utilimaster...... 149-151 Vents & Fans...... 162-163 © Copyright 2021 — Reproduction in whole or in part is strictly prohibited without written permission from MILL SUPPLY, INC. REPLACEMENT 2 FRONT BUMPERS 800-888-5072 • MillSupply.com FRONT BUMPERS All Bumpers Made in USA

"Be sure to measure the width of your current bumper 85-537 - 86" Front Bumper - White in a straight line! Do not follow curvatures!" Fits Utilimaster with Ford chassis. White Holes must be drilled for mounting bumper to the frame. Bumper can be shipped UPS. 85-537 - 86" Long 85-538 - 96" Front Bumper - White 85-538 - 96" Long This bumper will fit Ford, Freightliner, and Smooth Look Workhorse chassis. White. Holes must be drilled for Powder Coated White mounting bumper to the frame. Must ship by Freight. 9-5/8" Tall

Our new bracket and 'smooth look' bumpers are heavier Original Rib Style Bumper New Smooth Look Bumper duty than the original rib bumper and offers a cleaner look. Rib style bumper are still available, see following page

85-632 1/4" steel bumper bracket Convert your Rib Style Bumper to our Smooth Look Bumper that fits Freightliner chassis. Fits our bumpers 85-528, 85-530, 85-537 & Our bumper mounting bracket 85-632 will allow you to convert your rib style 85-538. bumper with one of our new smooth surface bumpers.

85-528 - 90" Front Bumper - White Mounting holes Fits Utilimaster with Freightliner chassis. The universal must be drilled design can replace all styles with or without center hole or plug hole. Holes must be drilled to mount a plug and for mounting the bumper to the frame. Use our 85-632 bumper bracket for mounting. Bumper must Smooth Look be shipped freight. 85-528 - 90" Long 11" Tall Powder Coated White

85-530 - 93" Front Bumper - White Fits Utilimaster and Morgan with Freightliner or Workhorse chassis and the Ford F59. Same design as 85-528 without center holes or mount holes and 93" Powder Coated White overall width. Shipped freight

11" Tall 85-530 - 93" Long

Freshen up your bumper M-1662 Dull Aluminum with Your Choice of M-1663 Gloss White M-1664 Gloss Black Touch-Up Paint M-1665 Ultra Flat Black M-1666 Gray Primer, Sandable 11 oz. M-1667 Banner Red

Mounting holes must be drilled 85-500 - 85" Front Bumper - White 7 Gauge metal bumper fits Grumman and Utilimaster with Freightliner and Ford chassis. This bumper runs 85-500 - 85" Long straight from one end to the other.

7" Tall Original Rib Style Powder Coated White Mounting holes 85-560 - 91.5" Front Bumper - White must be drilled 7 Gauge metal bumper with a slight angle at each end and fits Utilimaster with Ford chassis.

85-563 - 96" Front Bumper - White Original Rib Style 85-560 - 91-1/2" Long 7 Gauge metal bumper with a slight angle at each 7" Tall end and fits Utilimaster with Freightliner chassis. Powder Coated White 85-563 - 96" Long

85-520 New Style 1/4" steel heavy duty bumper bracket that fits Ford chassis. Fits our bumpers; 85-500, 85-560 and 85-563. Replaces old "hat style" 29-355A - L & R Hood Holddown bracket. Assembly, includes hardware, 1 pair This old style Ford hat-bracket 29-355 - L & R Hood Holddown is now replaced with 85-520. Bracket, Hardware Not Included, 1 pr Fits ALL Utilimaster vehicles.

4 Mounting holes on face: 30" x 5-1/2" apart

Powder Coated Black 10" Tall 85-588 - 89" Long

85-588 - 89" Front Bumper - Black 7 Gauge metal bumper that fits Fedex Ground trucks with International chassis. Bumper can be shipped UPS.

6 Mounting holes on face: center holes 25-1/2" x 6" apart. End holes 20" from closest hole.

85-550 - 86" Front Bumper - Black

9" Tall Fits Grumman, Utilimaster, Union City Body with 85-550 - 86" Long Workhorse/GM chassis. Bumper can be shipped 85-591 - 91.5" Long UPS. OE Mounting Brackets must be modified. 85-591 - 91.5" Front Bumper - Raw steel Similar to 85-550 but 91.5" long and not painted.

REAR STEP BUMPERS Powder Coated Bumpers Powder Coated Body Part No. Width Bumper Color Black or White All Bumpers 85-778...... 78"...... Black Made in USA 85-782...... 82"...... Black GRIP 85-786...... 86"...... Black STRUT Fits Chassis: 83-183...... 86"...... White SURFACE • GM 85-794...... 94-96"...... Black 83-194...... 94-96"...... White • Workhorse • Ford • Freightliner • International Fits all StepVan Frame Widths from 35" to 45" regardless of body width

Order your Bumper by Body Width Mill Supply bumpers are designed better, built 78" - 82" - 86" - 94" - 96" tougher, easier to install and a better value! 12" Deep Built Tough with 1/4" steel side plates and a 1-1/2"x 1-1/2" square tube facing with 3/16" wall thickness to stand up to the BUMPER MOUNT most severe beatings. Large one foot deep 14ga. Grip-Strut PLATE Surface for sure foot placement and safety while allowing BP-1112 - Bumper Plate 11-1/2" snow and debris to fall through. Strong Rubber Impact Strips Square with 8 holes. Sold protect bumper and truck when backed into docks. One Man individually & not included with Installation... Our simple mounting procedure requires only one bumper. individual for installation. TRUCK FRAME TRUCK FRAME Bumpers Include: • (2) 18" Rubber impact strips with hardware

• Reflective tape OUR BUMPER PLATES WELD TO • (2) mounting brackets with hardware THE TRUCK FRAME • Does not include bumper mount plate, see right For replacement rubber bumpers see page 6 No Fuss Installation for Bumpers with Shocks! Popular on Cintas and Frito-Lay Our new bumper bracket makes it easy to attach our bumper to your shock or box truck mounts. We even slotted and pre-drilled the holes to allow for adjustment and make your life easier. Now you can leave your shocks or bumper extensions on the truck. Our bumper shown 2 Needed mounted to the shock per Bumper absorber with our angle bracket. 2.5" 7.5"

4 Easy Steps to Install Our Bumper 1.) Install the 86-3525 angle bracket to your existing shocks or brackets 3.5" and level using the slotted holes. 2.) Place and center our bumper into position. 86-3525 - Bumper 3.) Mark and drill the holes into the mount plate underneath the bumper. angle mount bracket 4.) Bolt on. It's that easy! NEW

Order springs GRIP 95.5" Width Powder Coated separately STRUT SURFACE Black 86-881 Order springs Inner "C" spring separately

86-501 86-882 Outer spring Outer spring 86-502 Inner spring

86-883 2-1/4”x1-3/8” Lower spring Rubber Impact Strip mounting box 86-503 Mid spring 86-880 86-504 Hardware for Lower mount spring bumper Includes:1 Bolt, 1 Nut, bracket 2 Washers & 1 Bushing 86-880 Bushing (2 needed per vehicle) Hardware Kit Spring Mounted Bumper Spring Hardware Spring Hardware 86-896 - 95.5" Black Bumper with side plates (Order separately) (Order separately) 86-882 - Outer spring 86-501 - Outer spring • 1/4" Steel Side Plates and Spring Mount Surface 86-881 - Inner "C" spring 86-502 - Inner spring • 2" x 2" Square Tube Facing with 3/16" wall thickness 86-883 - Lower mount box 86-503 - Mid spring • 9-1/2" deep 14 gauge anti-slip Grip-Strut Surface 86-880 - Hardware Kit 86-504 - Lower Mount Brkt • Strong Rubber Impact Strip 86-880 - Hardware Kit • Bumper must be drilled to mount outer spring brackets

SINGLE RETRACTABLE STEP

Retractable Step can be bolted PART NO...... Length CLOSED M-1431-96 ...... 95-1/2" or welded to the floor, bumper or M-1431-86 ...... 85-1/2" frame. Step is perforated with a black powder coat finish.300 lb. Wt. Limit. We include an aluminum Overall depth open: 14-1/2", Overall bar washer to eliminate sag 1-3/8" depth closed: 12" Height closed: OPEN and keep the rubber against 5-1/4", Step depth: 8". the bumper for a clean look. 83-920 - 24" Wide Retractable Step Bar washer is not drilled. 83-934 - 28" Wide Retractable Step 2-1/4"

All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. 6 REPLACEMENT LICENSE BOXES & RUBBER BUMPERS 800-888-5072 • MillSupply.com RECESSED LICENSE PLATE BOXES/INSERTS RUBBER BUMPER IMPACT STRIPS REPLACES GRUMMAN / MORGAN OLSON 33-538 - Aluminum License Plate Box with two LED license lights. 33-540 - Aluminum License Plate Box without lights. NEW Overall Dim: 18-1/2" x 10-3/8" M-1431-18 - 18" Rubber 'D' Bumper with Angled ends. This is an Fits in hole: 16-1/2" x 6-3/4" exact replacement with correct 7-1/2" hole spacing for a quick and License light hole size: 1-1/4" easy replacement. Includes bar washer and bolts.

33-531 - Aluminum License Plate Box (Lights not included) Overall Dim: 18-1/2" x 10-1/2" PART NO...... Length Fits in hole: 16-1/4" x 6-7/8" M-1431-24 ...... 24" License light hole size: 1-3/4" M-1431-78 ...... 77-1/2" M-1431-82 ...... 81-1/2" 33-527 - Plastic License Plate Box M-1431-86 ...... 85-1/2" (Lights not included) Overall Dim: 17-3/8" x 10-3/16" M-1431-94 ...... 93-1/2" Fits in hole: 15-1/2" x 6-3/4" We include an aluminum M-1431-96 ...... 95-1/2" License light hole size: 1-3/4" bar washer to eliminate sag and keep the rubber against License Lights that fit in 1-1/4" hole the bumper for a clean look.

Bar washer is not drilled. 1-3/8" 66-443 - LED 2-Wire License light. Snaps into a 1-1/4" hole Snaps into a 1-1/4" hole. Rubber impact strips can be special ordered 66-431 - Incandescent 1-Wire to be cut and drilled to 2-1/4" license light. Snaps in 1-1/4" hole. any length in quantities of 20 or more License Lights that fit in 1-3/4" hole Mounts with 2 screws into HOLLOW "D" SHAPE BUMPERS a 1-3/4" hole 66-438 - LED chrome license light with 2-wire leads. 2 Screw mount, 1-3/4" hole. 66-438 70-4817 - Incandescent chrome license light with 1-wire plug. 2 Screw mount in Height 1-3/4" hole. Length 70-4817 26-338 - Incandescent chrome license light with 2-wire plug. 2 Screw mount Width in 1-3/4" hole. 26-338 Part No. Width...... Height...... Length ...... Hole Centers M-1258 4-1/2"...... 3-3/4"...... 12"...... 6" 11110 01 - Incandescent Armored license M-1047 4-1/2"...... 3-3/4"...... 13-1/2"...... 7" light with bracket. All aluminum construction, M-1078 4-1/2"...... 3-3/4"...... 18"...... 12" standard on Grumman/Morgan Olson. M-1169 3-5/8"...... 3-1/2"...... 14"...... 8" Overall Dim: 4-7/8" x 1-7/8" x 1-3/4. M-1169X 3-5/8"...... 3-1/2"...... 14"...... 10-1/4" SOLID BUMPERS

Replaces existing rotted-out license lights

671-1041 33-553 - LED License light with rubber grommet Dock bumper with 3 mounting 75-240 eyebrow to direct light to license plate. Includes a holes, at 6-1/2" centers. Dock bumper with 6-1/8" x 2-1/2" aluminum side plate to repair rusted Dim: 16"L x 2-1/2"W x 2"H 3" hole centers. Dim: area. Made for U.C.B.C. Powder coated white. Fits 6"L x 3"W x 3-1/2"H either side, sold each.

Diesel 4" Long Angle Flange Filler Necks 81-932 - 2" Diesel Fuel Filler Neck with Cap and 5/8" Vent 6" Long Straight Flange Filler Necks 81-930 - 2" to 1-1/2" Diesel Fuel Filler Neck with Green Cap and 5/8" Vent. Neck reduces to 1-1/2". 81-928 - 1-3/4" 90 Degree Fill Elbow 81-934 - 2" to 1-3/4" Diesel Fuel Filler Neck with 81-929 - 2" 90 Degree Fill Elbow Green Cap and 1" Vent. Neck reduces to 1-3/4". 81-937 - 2" to 1-1/2" Unleaded Fuel Filler Neck with 81-954 - 1-3/4" x 36" Flexible filler hose Black Cap and 5/8" Vent. Neck reduces to 1-1/2". 81-998 - 2" x 36" Flexible filler Hose 81-924 - 5/8" 90 Degree Vent Elbow 81-939 - 2" to 1-3/4" Unleaded Fuel Filler Neck with 81-858 - 5/8" I.D. x 36" Flexible vent hose 81-925 - 1" 90 Degree Vent Elbow Black Cap and 5/8" Vent. Neck reduces to 1-3/4". WHEEL NUT INDICATORS Wheel Nut Indicators can identify a loose wheel nut with a simple visual inspection. After a wheel is properly torqued the Wheel Nut Indicators are placed on the wheel nuts in a uniform direction. At a glance the driver can see if the Wheel Nut Indicator has turned counter-clockwise showing the nut loosened. Temperature-sensitive polymer detects bearing or brake overheating problems by deforming at temperatures above 250°F. Our part number 10-229 has a temperature rating of 450 degrees and is ideal for the garbage fleet and school buses that make frequent stops. Provides a quick visual of a loose wheel nut. One wheel nut Indicators shown in new position beginning to loosen • Reduce your risk of wheel detachment accidents. • Pays for itself in just one avoided re-torque procedure. • Quickly identify a hot wheel. • Decrease equipment downtime. • Facilitates official roadside inspections. • Clearly visible at night and in bad weather. • Easy to install. • Costs only a few dollars per wheel.

Sizing Wheel Nuts Mill No. Dim " Dim mm OE No. Stk Code Typical Applications Qty 10-203 13/16” 20.5 WCH15C 63076 Ford Courier Vans 100 Measure 27/32” 20.8 WCH16C 63078 Ford 450 & 550 100 from flat 10-207 7/8” 22.0 WCH04C 63058 Smaller courier & 100 to flat. 10-208 GMC flanged cap of flat nut. 10-209 15/16” 23.8 WCH17C 63131 Dodge – 1 Ton. 100 Installation Procedures: 10-211 1 25.0 WCH12C 63070 Curb-side courier units 100 1. Torque wheel nuts to proper specs 10-216 1-1/16” 27.0 WCH05C 63060 School buses, courier units & 100 2. Ensure correct size by measuring Ford tapered nut. nut from flat to flat 10-218 1-1/8” 28.0 WCH06C 63062 Inverted flange for school buses 100 3. Place wheel check over each nut & small transit buses. with collar toward wheel. (easier to 10-220 1-1/4” 31.0 WCH07C 63064 Heavy duty trailers – spoke wheel. 100 replace if necessary) 1-5/16” 33.0 WCH03C 63141 Budd Uni-mount – 10 stud 100 4. For disc wheel, point the point to 10-227 hub-piloted wheel & GM Buses. the center of following stud 5. For other wheel types, (spoke 10-229 1-5/16” 33.0 WCHT03 63136 Same size as 10-227 but 20 o pattern), point indicators toward has 450 max temperature rating, 20 pcs per bag. Ideal for school the hub buses, garbage trucks and other vehicles that make frequent stops 6. Inspect daily, if moved or deformed 10-234 1-1/2” 38.1 WCH02C 63054 Motor Wheel – 8 stud hub- 100 replace with red identifier and piloted wheel & cone locknut. notify service dept. 10-236 1-9/16” 40.5 WCH09C 63066 Hino and Isuzu trucks. 100 10-247 1-15/32” 37.5 WCH01C 63052 Budd stud piloted nuts. 100

All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. REPLACEMENT PARTS for 84 GRUMMAN OLSON HOOD 800-888-5072 • MillSupply.com GRUMMAN KURBMASTER HOOD PARTS REPLACEMENT GRILLES An ideal replacement on your Grumman Olson Kurbmaster. This grille was designed by Mill Supply for Strength, Flexibility and a Quick, Easy Replacement. Original grilles are no longer available.

GM CHASSIS LIGHTS & BEZELS

36-212 LH or 38"W x 21"H RH Headlamp Bezel, 36-321 - Black Flexible ABS Plastic Grille 14-3/4"H x 9-1/4"L AV-13274-P Mounting 31-104 screw Hood Bumper, 7/8" Dia. Base x 3/4" Tall See installation instructions on-line 34-112 Hood Gasket, 36-545 - Headlight The original style headlight 31-222 Right 25 foot roll Conversion Kit. The original retaining ring is not available Cowl Casting style headlight bucket is no but the adjusting screw are Corner. Fits For interior engine cover longer available; our kit will M-1459-P Kurbmaster. gaskets see page 92 Left side not convert your system with Retaining Screw available available parts. The new kit AV-9851-P includes: headlight bucket, Adjust. Nut retaining ring, headlight AV-11246-P adjusting screws and nut, Adj. Screw miscellaneous screws and rivets as needed, template NLA with instructions. OE Style Amber parking High/Low Dual Beam Head Lights lamp is No Longer Available. 66-145 - New Style LED with 3-pin male H4 connector Use 66-145 as a replacement. Amber Front Turn Signal LED HALOGEN CONTINUOUS ALUMINUM HOOD HINGES

29-300 - 2" X 72" Flush Continuous Aluminum Hinge

LED HI/LOW BEAM HEADLIGHTS MHLE-07HILO - 7” Round LED Bulb 29-324 - 68-1/2" L Offset M-50915 - H/L Load Equalizer HALOGEN HI/LOW BEAM Continuous Aluminum Hinge. Module with 36" leads HEADLIGHTS Popular on Grumman/Morgan 65-007 - 7” Round Halogen Olson. 43-519 - Pigtail for Headlight 1" 1-3/4" See pages 188 - 197 of this catalog for a Mill Supply carries a variety of sizes of steel, stainless steel large selection of cab and marker lights and aluminum continuous hinge. Call us.

All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. REPLACEMENT PARTS for 800-888-5072 • MillSupply.com GRUMMAN OLSON HOOD & BODY 85 GRUMMAN KURBMASTER HOOD PARTS

Non-Locking Latch with Flat Rods 3-4973-ASS - Complete Non-Locking 5619 Assembly with Stainless Steel Center Visit us online for more Striker for and End Bolts detailed illustrations! Hood Latch 3-4973-CSS - S.S. Center Only 3-4973-CZ - Zinc Plated Center Only

Locking Latch with Cables CL-2301-AZ - Complete Locking Assembly 32-002 with end bolts, Dull Black Center Safety Catch CL-2301-ACZ - Center Only, Dull Black Finish Assembly CL-2301-BB - End Bolt Only VCC-96 - 96" Cable Only

31-385 Hood Prop, Non-Locking Latch with Cables 3/8" Dia. Rod CL-2301-BZ - Non-Locking Complete x 36" long Assembly CL-2301-BCZ - Center Only CL-2301-BB - End Bolt Only VCC-96 - 96" Cable Only

32-003 31-387 Hood Prop Hood Pop-Up with Brackets, Spring 29-300 - 72" x 2" open-width continuous 19-1/2" Fully Extended hood hinge with 3/16" pin, aluminum

FUEL TANK DOOR PARTS RUB RAIL END CAPS Fuel Tank Doors are complete with Hinge, Spring and Clip

8" 5-1/2" Front With Offset 123503-37 Front Side Body Rub Rail End Cap with offset, 5-1/2" fits 1975-89 Grumman Olson 45100011 Front Side Body Rub Rail End Cap with offset, 33-304 1990-on Morgan Olson 33-320 - Left 33-330 5" Hinge Only 33-321 - Right 33-318 6-3/4" Hinge Only

Rear Without Offset 123503-38 Rear Side Body Rub Rail End Cap without SP-4 33-314 SP-6 offset, 1975-89 Grumman Olson Spring Clip Gas Tank Door Spring Gas Tank Door Spring 45100012 (D Shape Door) for "D" shape door with 2 clips for sq. door Rear Side Body Rub Rail End Cap without (1/8" Dia. wire) (3/32" Dia. wire) offset, 1990-on Morgan Olson

All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. REPLACEMENT PARTS for 86 MORGAN OLSON HOOD 800-888-5072 • MillSupply.com MORGAN ROUTE STAR FIBERGLASS HOOD PARTS WHAT IS THE DIFFERENCE BETWEEN A KABMASTER, KURBMASTER AND ROUTE STAR? GM CHASSIS LIGHTS & BEZELS Kurbmaster - Standard hood (like a car or pick-up truck) See next page for front lights that fit Ford Chassis Kabmaster - One-Piece front end that lifts up Route Star - Morgan Olson produced both hood types for the Route Star. OE Style Amber parking lamp is No Longer Available. NLA Use 66-145 as a replacement.

66-145 - New Style LED Amber Front Turn Signal

29-310 See pages 188 - 197 for marker lights Hood Hinge, used on fiberglass hood M-1110R 36-214 LH or Engine Cover 32-002 RH Headlamp Gasket, Safety Catch Bezel, 25 foot roll Assembly 14-3/4"H x 9-1/4"L AV-13274-P Visit us online for more Mounting detailed illustrations! screw 31-104 Hood Bumper, 7/8" Dia. Base x 3/4" Tall 31-387 Hood Prop with Brackets, See installation instructions on-line 19-1/2" Fully Extended 36-545 - Headlight Conversion Kit. The original The original style headlight style headlight bucket is no retaining ring is not available longer available; our kit will but the adjusting screw are convert your system with M-1459-P available parts. The new kit Retaining Screw includes: headlight bucket, AV-9851-P retaining ring, headlight Adjust. Nut adjusting screws and nut, AV-11246-P miscellaneous screws and Adj. Screw rivets as needed, template with instructions. Original Style Hood Catch shown with New Style Hood Catch shown with Striker Pin Parts available separately 'U' Pin Parts available separately High/Low Dual Beam Head Lights with 3-pin male H4 connector

32-114 LED HALOGEN Hood Striker Pin

32-111 LED HEADLIGHTS HALOGEN HEADLIGHTS Strike Support 32-117 MHLE-07HILO - 7” Round LED Bulb 65-007 - 7” Rd Halogen H/L New Style Hood Latch Assembly M-50915 - H/L Load Equalizer 43-519 - Pigtail for Headlight with adjustable 'U' pin and heavy Module with 36" leads duty support.

WF-1687 Winterfront, 19"H x 43-1/2"L. 32-115 Complete with push button Hood strike 31-106 mounting hardware. Easy (used with pin 32-114 Hood Spring on/off. Fits Kurbmaster & and support 32-111) (secondary latch) Route Star

All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. REPLACEMENT PARTS for 800-888-5072 • MillSupply.com MORGAN OLSON HOOD 87 MORGAN KABMASTER / ROUTE STAR ONE-PIECE FRONT END HOOD PARTS FREIGHTLINER CHASSIS LIGHTS Complete Hood Lifts with Headlights and Grille Our Gas Shocks with Round Ends use 65-010-RH 65-010-LH 31-156 13mm Ball Studs and Headlight Assy Headlight Assy require a 31-026 Locking Clip IF YOU ARE NOT SURE 31-026 PLEASE CALL WITH VIN # Locking 31-156

Non-Locking GM CHASSIS LIGHTS & BEZELS 65-002 Our Gas Shocks with Rectangular Ends Headlight with 65-003 use 31-158 10mm Ball Studs and Chrome Door. 7" Closed 36-543 do not require a Locking Clip Includes 6014 Back Chrome Bulb and Headlight Door Locking 31-158 36-543 Assy headlight door. Non-Locking

Hood Gas Shocks Part# Extended Non Uses Number Length Locking Locking Ball Stud Lbs 31-162 17.00" X 10mm 130 31-163 20.00" X 10mm 110 60002-Y - Yellow Lamp with 31-164 20.00" X 10mm 110 760364 40002Y 4" yellow 486-A - 3" amber Grommet & Pigtail. 3-wire. 31-136 20.25" X 13mm 180 Engine Cover light kit with center mount 60001-Y - Yellow Lamp with 31-134 20.50" X 13mm 160 Rubber Bumper for grommet. round reflector Grommet & Pigtail. 2-wire. 31-142 20.50" X 13mm 160 1/4" bolt, 1-5/8" Dia. 31-111 20.50" X 13mm 140 x 3/4" tall 31-109 20.50" X 13mm 140 FORD CHASSIS LIGHTS & BEZELS 31-161 26.50" X 10mm 110 31-166 26.50" X 10mm 110 36-548 65-004 - 7" Headlight 31-143 26.50" X 10mm 150 Headlight Assembly with bulb, 31-141 26.50" X 10mm 150 Retaining chrome door, metal 31-154 28.00" X 13mm 150 31-155 28.00" X 13mm 150 Ring, housing, aluminum 31-132 30.75" X 10mm 160 75-250 7" Dia. x adaptor ring, and Engine Cover Rubber 1/2" Deep pigtail for light. 94-820 Bumper. Recessed for Hood Guide & 3/8" bolt. 2-1/2" Dia. x 1" receiver plate

66-148 - Park/Turn Signal This aluminum adaptor ring mounts to Lamp with Clear Lens the body to provide new mounting holes Dim: 2-11/16" x 7-1/4" to install this assembly. 31-385 Hood Prop LED HALOGEN Rod, 3/8" Dia. Hood Hinges with Gussets. 29-312 36" long Cast Hood Hinge Popular on Fedex Ground with Grease Fitting. 29-308 29-309 LED HEADLIGHTS Left Hood Hinge Right Hood Hinge MHLE-07HILO - 7” Round LED Bulb HALOGEN HEADLIGHTS with Gusset with Gusset M-50915 - H/L Load Equalizer 65-007 - 7” Rd Halogen H/L For interior Module with 36" leads 43-519 - Pigtail for Headlight Foil Backed Interior Engine Cover Box engine cover gaskets see Insulation with adhesive on 1 side. page 92 32-320 32-336 35-905 - 18" x 48" x 1" Insulation 2-Piece Rubber Draw 35-910 - 48" x 48" x 1" Insulation Hood Latch "Aerolatch" 8-1/4" Latch, 9-1/4"Rubber WF-1687 8-1/4"H and Nylon Winterfront, Also fits Construction 19"H x 43-1/2"L. 9-1/4" at rest Kabmaster Complete with push 34-112 1" Mounting Holes button mounting Hood Gasket, 1" C to C hardware. Easy on/off 25 foot Roll

All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. REPLACEMENT PARTS for 88 UTILIMASTER HOOD 800-888-5072 • MillSupply.com UTILIMASTER LED 7" Round HI/LOW BEAM HEADLIGHTS B-9004 - MHLE-07HILO Halogen 43-556 - Headlight 7” LED Headlight headlamp Plug and Harness HALOGEN bulb assy. Fits 9004 bulb. 65-007 7" Halogen 95-152 - Hella Headlight capsule with frame, Headlight uses B-9004 bulb. Overall Dim: 8-1/2"H x 13-7/8"W. Mounting Holes on 7-1/2" and 11-5/8" centers.

65-005 - Headlamp Assy 420-0136 Complete w/Headlight Door 65-002 65-003 36-543 1 1 Amber Marker Lamp 10- /2" W x 8- /4" H x 6"D 7" Open Back 7" Closed Back Chrome with 3"x1.5" 36-228 - Chrome Door Only Headlight with Headlight Assy Headlight reflector lens. Uses bulb, chrome w/o chrome Door 194 bulb. ring and metal beauty ring housing HI/LOW BEAM HEADLIGHTS HL-6054-H - 7" x 5" Rect. Halogen High and Low Beam Headlight

29-305 - Stainless Steel Hood Hinge, 3" Open width x 72"L with 1/4" pin. 14 gauge. MHLE-5X7HILO - 7" x 5" Rect. LED High and Low Beam Headlight

29-355 See our Light section for LED marker lights - Hood 45165 - Automatic Daytime Running Hold Down 29-355A Hood Lamp Module is specifically designed Brackets Hold Down for Utilimaster vehicles 1995-on. without Brackets with hardware hardware FRONT PARK/TURN SIGNAL LIGHTS

Lamp Only Dim: 6-1/2" x 2-1/2" 31-389 60002-Y.....Amber Oval Sealed Lamp w/grommet and pigtail Hood Prop, 60202-Y.....Amber Oval Sealed Lamp Only Extended 94993...... Pigtail for incandescent lamps 29", Retracted 60094-Y.....LED Amber Lamp Kit w/grommet & pigtail, 44 Diode 16" M-1215-101 60290-Y.....LED Amber Lamp Only, 44 Diode 4-3/4" Rubber 32-320 60700...... Grommet Only Hood Latch 8-1/4" Rubber 94706...... LED Fit'N Forget Adaptor Plug with Catch Hood Latch with Catch 10202-Y.....2-1/2" Amber Marker Light only 10704...... Grommet only, closed back, fits in 3" hole, Fits Utilimaster with plastic fenders. 32-312 94902...... Plug only 12" Rubber Hood Latch with Catch 32-338 See pages 188 - 197 of this catalog for a 1994-on 12" Rubber Hood Latch with catch, Relaxed dim: 10-3/4" large selection of cab and marker lights

All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. REPLACEMENT PARTS for 800-888-5072 • MillSupply.com UTILIMASTER HOOD & BODY 89 UTILIMASTER HOOD RUBBER FUEL TANK DOOR & HARDWARE 1-1/2" Dia. 1-1/2" Length 31-108 8-1/4" Hood Bumper, Predrilled for mounting 2"H x 2"L x 2-1/4"W 30-740 6-3/8" Rubber Socket with Plastic Plunger. Has threaded mount plate. 31-110 - Catch for hood bumper 33-314 75-192 Fuel Tank Rubber Bumper, Door Spring 33-420 Recessed 5/16" with 5/16" hole. Fuel Tank Door with Hinge, 1-1/2" Dia x 5/8" H metal plate. 6-3/8" x 8-1/4" Also fits our bracet 29-355 & 29-355A shown on previous page.

75-250 Rubber Bumper GS-1015 Recessed 1/2" with 3/8" hole Tank Door Spring Dim: 2-1/2" Dia. x 1"H fits Utilimaster and UCB

HOOD HARDWARE STAINLESS STEEL REPLACEMENT 20-1/4" ONE-PIECE FRONT END SCREWS Extended

31-136 - Hood Gas Shock,Length: 20-1/4"

for one piece front end 13mm 31-156 - 13mm Ball Stud for 31-136 ball stud 31-026 - Safety Clip for 13mm ball stud and clip Replacing the existing aluminum 20-1/4" Huck bolts that assemble the one 31-138 Extended piece front end on Utilimasters can be expensive. We have a simple solution. Stainless steel 20-1/4" screw, nut and washer. Sold 31-140 Extended separately in packages of 100.

97-309 - S.S Phillip truss screw 1/4-20 x 7/8"L, 100 pcs. Lock 10mm ball 97-559 - S.S. Nylock Nut, 1/4-20 , 100 pcs stud 97-519 - S.S. Washer, 1/4”, 100 pcs

31-138 - Gas Shock without Lock, 20-1/4" 31-140 - Gas Shock with Lock, 20-1/4" INTERIOR ENGINE BOX INSULATION 31-158 - 10mm Ball Stud, 5/16"-18 thread, for 31-138 & 31-140 Engine cover insulation with acoustic absorption, adhesive on one side with foil backing on the other. IF YOU ARE NOT SURE PLEASE CALL WITH VIN # Our insulations uses acoustic absorption with porous materials to line hard surface inside the RUBBER BOOT FOR FLOOR SHIFTER engine cover to help absorb engine sound.

75-198 - Rubber boot for floor shifter that fits Utilimaster. Oval/rectangular shape with overall dimensions: 9.75" x 8.5". Has 5 bellows with a metal 35-905 - 18" x 48" x 1" Insulation flange mounting surface. 35-910 - 48" x 48" x 1" Insulation

All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. REPLACEMENT PARTS for 90 SUPREME & UNION CITY BODY 800-888-5072 • MillSupply.com SUPREME BODY UNION CITY BODY CHEVY STEP High/Low Dual Beam Head Lights with 3-pin male H4 connector VAN & GMC VALUE VAN (NOT MADE OR SPONSORED BY UNION CITY BODY) LED

LED HI/LOW BEAM HEADLIGHTS MHLE-07HILO - 7” Round LED Bulb MHLE-5X7HILO - 7"x 5" Rect. LED Bulb M-50915 - H/L Load Equalizer G-400-S Module with 36" leads Amber Front Side 65-005 Headlamp Assy Marker Lamp Complete w/Headlight 5-7/8" x 2-3/4" Door Black Lexan HALOGEN 10-1/2" W x 8-1/4"H x 6"D 66-145 - New Style LED Amber Front Turn Signal with standard PL3 pigtail.

HALOGEN HI/LOW BEAM HEADLIGHTS 36-228 Chrome OE Style Amber parking HL-6054-H - 7" x 5" Rect. Halogen H/L Headlight Door Only lamp is No Longer Available. 65-007 - 7” Round Halogen H/L NLA Use 66-145 as a replacement. 43-519 - Pigtail for Headlight

Please Note: If you are replacing all your S/T/T lights to LED you will need to replace your flasher unit to our 44-891 or use M50905 pigtail with a built in resistor. See M-1215-101 light section of this catalog. 4-3/4" Rubber 30-765 - 2-3/4" Plunger Holdown R-13760 - Metal Retainer ROUND HEADLIGHT BUCKET AND RING 760364 - Rubber Socket for the STEPVAN, VALUE VAN 20-1/4" Extended

31-149 Gas shock, extended length 20-1/4" 31-158 - Ball Stud, 10mm, 5/16"-18 thread 31-028 - Safety Clip for 10mm ball stud 31-158 31-028

36-545 - Headlight Conversion Kit. The original style Lamp Only Dim: headlight bucket is no longer available; our kit will convert 6-1/2" x 2-1/2" your system with available parts. The new kit includes: 60002-Y... Amber Oval Sealed Lamp w/grommet and pigtail headlight bucket, retaining ring, headlight adjusting screws 60202-Y... Amber Oval Sealed Lamp Only and nut, miscellaneous screws and rivets as needed, 94993...... Pigtail for incandescent lamps template with instructions.

60094-Y... LED Amber Lamp Kit w/grommet & pigtail, 44 Diode 60290-Y... LED Amber Lamp Only, 44 Diode See pages 188 & 197 of this catalog for a 60700 ..... Grommet Only 94706 .... LED Water Tight Plug large selection of cab and marker lights

29-307 - Hood hinge for UCBC Classic. Cast aluminum butt end only.

36-230 - Left AV-12600 G-377X o 36-232 - Right 90 Pigtail & socket Side Marker Bulb Headlight Door for assembly for front side Socket, receives Round Headlights marker light. Receives B-194 bulb. B-1157 bulb. 95-140 - Rectangular Headlight 65-003 Assembly mounted in round 7" Closed Back 28" bucket. Includes Lamp (HL6052) Headlight Extended Comes assembled. Includes adj. screw & spring. 31-144 - Gas shock, Length 28" 31-156 - 13mm Ball Stud for above shock - Headlight 36-545 31-026 - Safety Clip for 13 mm ball stud High/Low Dual Beam Head Lights Conversion Kit. The original style headlight with 3-pin male H4 connector 31-026 bucket is no longer 31-156 available; our kit will convert your system LED with available parts. The new kit includes: headlight bucket, 31-201 - LH retaining ring, headlight 31-200 - RH adjusting screws and nut, miscellaneous Hood Spring 12-1/4" mtg. screws and rivets as 94-425 - Round Rub Rail End Cab. hole to mtg. hole needed, template with Fits UCBC 1992-06. Fits LH or RH instructions. when open on all models with round rub rails. Overall Dim: 5" x 3" x 1" LED HI/LOW BEAM HEADLIGHTS MHLE-07HILO - 7” Round LED Bulb MHLE-5X7HILO - 7"x 5" Rect. LED Bulb M-50915 - H/L Load Equalizer Module with 36" leads

HALOGEN Extends Extends to 12" to 10"

1" 32-160 1-1/4" HALOGEN HI/LOW BEAM 6" Rubber Hood Latch HEADLIGHTS 32-336 32-338 2 Piece HL-6054-H - 7" x 5" Rect. Halogen H/L 9" Rubber Draw Latch (when 10.75" Rubber Draw Latch 65-007 - 7” Round Halogen H/L at rest) Extends to 10". Has (when at rest). Extends to 12". 43-519 - Pigtail for Headlight cover for exposed bolts. Base Base Mounting Holes 1-1/4" Mounting Holes 1" Ctr. to Ctr. Ctr. to Ctr.

All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. REPLACEMENT 92 BUMPERS, GASKETS & HOLDDOWNS 800-888-5072 • MillSupply.com BUMPERS, GASKETS & HOLDDOWNS HOOD BUMPERS INTERIOR ENGINE COVER GASKET

75-250 Rubber Bumper (BLACK) 75-300 Rubber Bumper (WHITE)

Recessed 1/2" with 3/8" bolt hole. Overall Dim: 2-1/2" Dia. x 1"H M-1106 M-1110 M-1114 Engine Cover Engine Cover Engine Cover Gasket, Gasket, 25 ft. roll Gasket, 10 ft. roll 50 ft. roll

75-192 Rubber Bumper 1-1/2" Dia x 5/8" High with 5/16" 75-180 - Rubber bushing, recessed hole with metal plate. universal fit. 2" diameter, M-1116 Popular on Utilimaster 3/4" hole, 5/16" thick Engine Cover Gasket. 34-165 13 foot length needed per Engine Cover/Dog SHIFT BOOTS truck, sold per foot. House Gasket, 20 ft. roll, Fits the Route Star with fits Utilimaster, fiberglass engine cover. 15/16"W x 3/4"H DOG HOUSE HINGE

3415222 - Dog house hinge

75-196 - Shifter boot for floor shifter used on Grumman/Morgan Olson with 75-198 - Rubber boot Freightliner chassis, 2001 for floor shifter that fits on. This shifter boot base Utilimaster. Oval/rectangular shape with overall diameter is 8-3/4" and the 32-163 height is 5-1/2". To fit your dimensions: 9.75" x 8.5". Has 5 bellows with a metal Upper Engine vehicle, the bottom ring will Cover Latch Assy need to be trimmed off. flange mounting surface.

HOOD & INTERIOR ENGINE BOX HOLDDOWNS

32-160 32-154 32-338 6" Rubber Hood 3-7/8" Rubber doghouse 10.75" Rubber Latch with catch. latch with catch. Draw Latch (when at rest) Base Mounting Holes 32-151 A Ctr. to Ctr. 1-1/4" Catch 1-1/4" 32-312 for 12" Rubber 32-150 Hood Latch with Catch

Dimension “A” 32-208 32-320 Part No. when latched 7-7/8" Heavy-duty 8-1/4" 32-336 M-1215-65 2" Rubber Hood Rubber 9-1/4" Rubber Latch with upper Hood 9-1/4" & Nylon Draw M-1215-71 2-1/2" Latch catch and lower Latch. 32-150 M-1215-86 3-3/8" with Mounting Holes: bracket. catch. Draw-down M-1215-101 4-3/4" 1" C to C. hinged latch M-1215-131 8-3/4" 1"

FULL BRAZIER FULL BRAZIER Use these columns first to HEAD 3/16" DIA. HEAD 1/4" DIA. locate your correct Grip LENGTH PART NUMBERS PART NUMBERS G R I P UNDER (100 pcs per pack) (100 pcs per pack) MIN NOM MAX HEAD "L"

Used on floors and inspection plates 38-206-02-13 38-208-02-13 .047" 3/32" .140" 1/4" Part No. Shank Dia. B Dim. L Dim. 38-206-04-13 38-208-04-13 .078" 1/8" .171" 9/32" 90-550...... 5/16"...... 250...... 500 38-206-06-13 38-208-06-13 .140" 3/16" .234" 11/32" 90-560...... 5/16"...... 300...... 600 38-206-08-13 38-208-08-13 .203" 1/4" .296" 13/32" 90-570...... 5/16"...... 400...... 700 38-206-10-13 38-208-10-13 .265" 5/16" .359" 15/32" 90-755...... 7/16"...... 275...... 550 38-206-12-13 38-208-12-13 .328" 3/8" .421" 17/32" 38-206-16-13 .453" 1/2" .546" 21/32" 90-548 - Spring loaded 38-208-20-13 .578" 5/8" .671" 25/32" fastener used on the battery GRIP = Total thickness of all fastened together sheets door box step on Utilimaster Rivets come in Packages of 100 5/16" shank, 1/2" 'B' dim.

SOLID ALUMINUM BRAZIER HEAD RIVETS Retains when (Type 1100F soft aluminum. flattened Made to resist oxidation in corrosive atmospheres.) FULL BRAZIER HEAD 90-520 90-505 - 5/16" Half S Spring, mounts Grommet (use with Part No Shank Diameter Shank Length Package Size RIVET SET with rivets (use 5/16" shank 91-406 1/8" 1/2" 100/bag with 90-755 only) diameter) Used on side door weatherstrip and lower wear strip on Grumman 90-507 - 7/16" Half 91-408 3/16" 3/8" 1 lb. box Grommet (use with 91-410 3/16" 1/2" 1 lb. box M-1255X - 1/4" Full Brazier Head Rivet Set 7/16" shank 91-412 3/16" 5/8" 1 lb. box M-1255 - 3/16" Full Brazier diameter) 91-414 1/4" 1/2" 1 lb. box Head Rivet Set 91-416 1/4" 5/8" 1 lb. box For use with air hammers using .401 Shank 91-418 1/4" 3/4" 1 lb. box

INDUSTRIAL RIVET HAMMER 90-280 Slip on Receptacle

• Takes .401 shank rivet sets • "Sure Grip" powder coated finish 90-420 • Includes spring retainer and regulator Stud pin • Teasing trigger with finger • Lightweight aluminum handle pull. 98-885 Bucking Bar Kit • Precision machine hardened & ground valve & cylinder 90-427 (Set of 4) • Made in U.S.A.; CE certified Stud mount 98-871 - 3/16" capacity, 2160 blows/minute, retainer 1/2" bore, 2-7/8" stroke, 6-11/16" length, 2.5 lbs. 98-881 - 1/4" capacity, 1740 blows/minute, 1/2" bore, 3-1/16" stroke, 8-1/2" length, 2.75 lbs. 90-425 Floor M-1257 - Set of two spring Air Rivet Hammers with “X” type feathering trigger retainers. Beehive and allows you to slowly begin riveting without damage to mount retainer. Quick Change type. the skin. This is critical in performing riveting operations.

All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. REPLACEMENT 94 RIVETS & FASTENERS 800-888-5072 • MillSupply.com MONOBOLT BLIND, STRUCTURAL 1/4" CAPACITY AIR/HYDRAULIC FASTENING SYSTEM RIVETER

Clean Break 16-025 - The smallest, yet when a most powerful reciprocating MADE Monobolt hydraulic riveter made. Sets nosepiece IN U.S.A. is used 1/8" through 1/4" steel rivets with up to 3500 lbs. of pull. Full 5/8" travel allows most rivet installations in one cycle. Operates between 90 and 120 psi. air pressure. Part No. Diameter Grip Material Unit Package 2771-0613 3/16" 5/16" Steel 100 16-025 ACCESSORIES & REPLACEMENT PARTS 2771-0617 3/16" 7/16" Steel 100 2774-0613 3/16" 5/16" Aluminum 100 20-2168 - Nosepiece for 3/16" Monobolt 2774-0617 3/16" 7/16" Aluminum 100 20-2169 - Nosepiece for 1/4" Monobolt 20-2929 - Replacement Jaws (3pc) 20-2168 20-2169

2771-0817 1/4" 3/8" Steel 100 For a clean break at the head of a 2771-0824 1/4" 5/8" Steel 100 Monobolt, use the proper nosepiece. 2774-0817 1/4" 3/8" Aluminum 100 2774-0824 1/4" 5/8" Aluminum 100 HEAVY DUTY HAND RIVETER

HEAVY DUTY RIVETER FOR MONOBOLTS

16-775 Heavy-Duty Riveter with self-adjusting jaw. Includes 5 nosepieces for 1/8", 5/32", 3/16", 7/32" and 1/4" M-39010 Heavy-Duty Riveter with self-adjusting rivets. Overall length: 20-3/4". This riveter is not made for two-piece jaw. Change nosepiece for 1/8", 5/32", Monobolts. For Monobolts use riveter M39010 (separate 3/16" and 1/4" rivets. Additional nosepieces required for pulling Monobolts. nosepieces will be required). 96031 - 3/16" Nosepiece for Monobolts 96030 - 1/4" Nosepiece for Monobolts An Easy Way to Temporarily Fasten Panels in Place while you Rivet COUNTERSUNK DRILL BIT

M-39100 - Countersunk Drill Bit. Double ended drill bit provides the correct size hole and countersink angle for 1/8" diameter countersunk head rivets in one operation. 16-020 DOUBLE ENDED DRILL BIT Pliers to Insert Fastener

The 16-012 & 16-014 Fastener pulls 98-808 1/8" double ended drill bit. Made in U.S.A. and holds panels together while you rivet. 16-012 - 3/16" Fastener 90-316 3/16" double ended drill bit. Made in U.S.A. This allows for a one man installation, 0-1/4" grip range even when large panels are involved.

All manufacturers’ names, numbers, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of the original manufacturers or approved by any of these manufacturers. REPLACEMENT 800-888-5072 • MillSupply.com RUBBER PRODUCTS 95 RUBBER FENDER MUD FLAPS 79-220 - 20"W X 24"T Mud Flap, Made from heavy-duty rubber. Is universal in application and can be mounted on Most step vans. One pair Most Popular StepVan Mud Flap Use with 79-235 Anti-Sail Bracket (see below) M-1239 - 36" long x 24" wide M-1239X - 30" long x 24" wide Full 1/4" heavy- Use with 79-240 Anti-Sail Bracket 79-099 - Aluminum Angle mud flap mount duty rubber for 1-1/2" x 1-1/2" x 96" (Sold Each) long lasting wear. 79-235 - Anti-Sail Mud flap Bracket for Plain (no words) Step Van Mud Flaps. Overall size 21"H x 22-3/8"W. Use with our mud flap 79-220. Galvanized. One Pair 79-240 - Anti-Sail Mud flap Bracket for Large Mud Flaps. Overall size 21"H x 26- M40256P Large flange 3/8"W. Use with our mud flap M1239 and 79-240 rivet, 50 pcs M-1162-P - Cut Per Foot M1239X. Galvanized. One pair M-1162-R - 100 Foot Roll 79-252 - 90 Degree Mud Flap Mounting Plate. Welds or bolts to truck or trailer body to provide fast and economical mount for NOTE: Most aluminum bodies do not have a flange or framework to all 24" wide mud flaps. One Pair. which M-1306 fenders can be fastened. Mill Supply can furnish mounting 79-252 strips (M-1133) and brackets (M-1134) using the system shown below. Allow at least one inch side tire clearance. ADHESIVE SEALANTS & BODY SEALERS 10.1 fl. oz./300 ml.

87-000 - Silaprene Adhesive/Sealant - Bonds and seals: panels, body seams, roofs. Adhesive will not allow panel to come loose. Gets stronger with age, won’t brittle or crack from vibration or thermal shock. Withstands extreme temperatures, unaffected by highway chemicals. Used by body manufacturers. Six month shelf life. Gray in color. M-1306-P - Rubber Fender Cut Per Foot M40256P - Rubber Fender in 50 Foot Roll M-1306-R 10.1 fl. oz./300 ml. M-1133 - Aluminum Mounting Strip 2" x 64" Use one per fender 87-014 - Polyurethane Sealant - Used on roof and side M-1134 - Aluminum Mounting Bracket ventilators, wiper transmission seals, and wherever you may want to (Use at least 12 per fender) remove the hardware in the future. Bonds aluminum, glass and steel. M-40256-P - Large Flange Rivet Weather resistant and ideal for sealing out water infiltration. to Mount Rubber Fender, 50 pcs 10.3 fl. oz./305 ml. PEEL BAK ADHESIVE Thickness Width Part No. M-1378 Sikaflex Polyurethane Adhesive/Sealant, Excellent SPONGE WEATHERSTRIP 5/32” 3/8” AV-4850 adhesion to aluminum, fiberglass, steel, glass, wood and plastic. Water 5/32” 1/2” AV-4851 resistant and tack free within a half hour. Stays flexible and withstands a 5/32” 3/4” AV-4852 wide temperature range. Popular with windshield replacement and leaks. 5/32” 1” AV-4853 5/16” 3/8” AV-4854 10.5 fl. oz./310.5 ml. 5/16” 1/2” AV-4855 5/16” 3/4” AV-4856 AV-1001 - Automotive Body Sealer, For use as a water and dust 50’ rolls 5/16” 1” AV-4857 seal on exterior and interior body surfaces. Can be air dried or baked and 7/16” 1/2” AV-4859 painted within minutes after application. Used in body seams and drip rails. 7/16” 3/4” AV-4860 Dries in minutes! WEATHERSTRIP ADHESIVE SOFT FLEXIBLE TAPE C-9 - Clear Silicone RUBBER Adhesive, Seals windows & seams. Bonds to felt, 3M8001 - Yellow, Fast-setting, glass, wood, metal, high bond-strength adhesive for rubber, paper, plastic, rubber & vinyl weatherstrip on vinyl, and fabric. 3 oz. 75-082 Flexible Rubber 1219-60 3/4” x 60 yard any metal surface. 5 oz. tube. tube. 1/16" x 3" x 72" Electrical Tape