Amidia Diamond Knives Made in Switzerland About Amidia LTD

Diamond cutting instruments for microsurgery

0 .50 4.00 0

15 20

15 25 30

amidia diamond knives made in Switzerland About Amidia LTD

Amidia LTD has been manufacturing diamond knives for ophthalmology, neurosurgery and plastic surgery for the last 20 years. Our many years of experience and strict quality controls allow us to only manufacture and sell first- class products.

Apart from our range of monocrystalline diamond blades, today we also offer blades made out of CVD diamonds. These blades are an interesting alternative to single use disposable blades since they can be used 400 – 500 times. A damaged blade can be replaced cheaply.

In the area of ophthalmology, we offer all commonly used designs. Thus we can provide a wide range of LRI and MICS blades. Our project managers are very happy to provide you with blades according to your customer- specific requirements with new blade dimensions.

We are very pleased to be able to offer you our products and services. Diamond cutting instruments for microsurgery

Contents

Diamond knives for cataract surgery (titanium handles with a pressure mechanism) 4

Diamond knives for cataract surgery (titanium bajonet handle with the j-slot mechanism) 7

Diamond knives for glaucoma surgery 10

Diamond knives for LRI surgery 11

Diamond knives with a micrometer for refractive surgery 12

Diamond knives for retinal surgery (with a titanium handle) 14

Step diamond knives 15

Diamond knives for neuro surgery 17

Zeppelin diamond knives for neuro surgery 18

Diamond knife for neuro surgery - dura knife for dura opening 20

Cosmetic diamond knives for plastic surgery 21

Black diamond knives 22

Cleaning liquid & accessories 24

Unitholder 25

Directions of use 26

Customer service 29

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 3 Page 6 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY

Diamond cutting instruments for microsurgery

TITAN Pencil Handle No. 200 DiamondPage 6 DIA MknivesON D CUTTI NG I NforSTR U M E NcataractTS FOR M ICROS U RGE RsurgeryY (titanium handles with a pressure mechanism)

The Amidia pencil handle is made out of best quality titanium or medical steel material. Each diamond bladeTI TgoesAN withPencil a straight Handle blade No. holder 200 or a 30 degree angled holder.

• The amidia pencil handle is made out of best quality TITAN and MEDICAL STEEL material. • Available with all diamond blades you will ﬁnd in our leaﬂets, for pencil handle. • Each diamond blade goes with a straight blade holder, or 30 degree angled holder (A in the Article No. means 30 degree angled)

STANDARD BLADES • The amidia pencil handle is made out of best quality TITAN and MEDICAL STEEL material. A • Available with all diamond blades you will ﬁnd in our leaﬂets, for pencil handle. L angledDiamond straight Knife Diamond Blade drawing holder•N o. E211ach holder /diamond straight bladedescription goes with a straight blade holdeB r, or 30 Ldegree angledNDo. 11 holderA/A1 blade (A in the Article No. means 30 degree angled) 45° No. 211A / straight,straight angled / single edge No. 11

45° B D 216A 216 straight 0.7 2.0 0.17 30° 16 45° 1.0 0.17 287ASTANDA287RD BLAstraightDES 1.0 2.0 0.17 30° 87 1.0 0.17 A 212ASTANDA212RD BLAstraightDES 1.0 3.0 0.17 30° 12 1.0 0.17 L 264Diamond SA 264S Knife straight 1.5 4.0 Diamond0.17 30° Blade 64S 30° NDiamondo. 211 / st Kraightnife NDiamondo. 11 Blade 3045°° 215ANo. 211212 A215/ st/ straightraight, straight angled 0.7 2.0 N0.17o. 1112 45° 15

3045°° No. 212A / straight, angled No. 12 1.B0 D0.17 211A 211 straight 1.0 3.0 0.17 45° 11 3045°° 1.1.00 0.17 210A 210 straight 1.5 3.0 0.17 45° 10

45° 211SA 211S straight 2.0 3.0 0.17 45° 11S 1.1.00 30° 0.17 STANDARD BLADES 1.0 0.17 45°1.0 0.17 tri-facet 30° STANDARD BLADES A 217A 217 tri-facet 0.7 2.0 0.17 45°/30° 17 303F° A1 Diamond Knife Diamond Blade 45° 30° 213A 213 tri-facet 1.0 3.0 0.17 45°/30° 13 303F° No. 212 / straight No. 12 L Diamond Knife Diamond Blade 30° No. 212A / straight, angled No. 12 1.0 0.17 No. 213 / tri-facet No. 13 1.0 0.17 303F° 1.0 0.17 No. 213A / tri-facet, angled No. 13

45° 1.B0 30° D0.17 1.0 0.17 45° 1.0 0.17 30° STANDARD BLADES A curved 40 3F° A1 45° 30° 224ASTANDA224RD BLAcurvedDES 4 facets 1.0 3.0 0.17 24 40 3F° 4F L Diamond Knife Diamond Blade A 40 ° L DiamondNo. 213 / tri- Kfniacetfe DiamondNo. 13 Blade 1.0 0.17 3F No. 27113A / lance/ tri-facet, with angledblunt sides No. 1713 1.0 0.17

B D No. 271A / lance with blunt sides, angled No. 71 1.0 0.17 1.BB0 DD0.17

40° 60° STANDARD BLADES 40° 60° A 40 ° L 60° Diamond Knife Diamond Blade widt1.0h 0.170.17 60° No. 271 / lance with blunt sides No. 71 1.0 0.17 B = width / L = length / D = thickness / A = angle width 0.17 No. 271A / lance with blunt sides, angled No. 71 widt1.0h 0.170.17 Amidia LTD Amidia AG Telefon | Fax Internet 8 B D Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] Mattenstwidth rasse 11 0.17 +41 32 333 24 74 [email protected]

CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 4 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland60°

60°

60° width 0.17 60° width 0.17

width 0.17 Amidia AG Telefon | Fax Internet 8 Mattenstwidth rasse 11 0.17 +41 32 333 24 74 [email protected] 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland Page 6 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY

TITAN Pencil Handle No. 200

STANDARD BLADES

A L Diamond Knife Diamond Blade No. 211 / straight No. 11 45° No. 211A / straight, angled No. 11

45° B D 45° Diamond1.0 cutting0.17 instruments for microsurgery 1.0 0.17 STANDARD BLADES 1.0 0.17

0.55 30° 1.0 0.17 Diamond Knife Diamond Blade 30° No. 212 / straight No. 12

30° No. 212A / straight, angled No. 12 1.0 0.17 30° 1.0 0.17 Page0.55 7 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY 45°1.1.0400 ° 0.170.17 1.0 30° 0.17

45°1.0 0.17 30° 0.2 STANDARD BLADES A 3F A1 45° 1.0 0.17 30° Page3F 7 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY 1.040° 0.17L Diamond Knife Diamond Blade NSo.TA 2N13D /A tri-RDfacet BL ADES No. 13 1.0 0.17 3F Front0.2 Back angledNo. 21 3Astraight / tri-facet, angled No. 13 1.0 0.17 Diamond Knife Diamond Blade drawing2.65 0.17 holder holder description B L D A/A1 blade B60° D No. 248 / lance with blunt sides, width 0.9 mm No. 48 1.0 0.17 STANDARD BLADElanceS No. 248A / lance with blunt sides, width 0.9 mm, angled No. 48 0.2 248A 248 lance with blunt sides 0.9 3.0 0.17 60° 48 Front40° Back No. 220 / lance with blunt sides, width 1.0 mm No. 20 width 0.17 STANDARD BLADES 40° 271ADiamond271 Knife lance with blunt sides 1.0 3.0Diamond0.17 Blade40° 71 2.6540° 0.17 60° No. 220A / lance with blunt sides, width 1.0 mm, angled No. 20 A 218ANo. 248 / lance218 with bluntlance sides, with bluntwidth sides 0.9 mm 1.0 2.0No. 480.17 60° 18 40 ° L DiamondNo. 214 / lanceKnife with blunt sides, width 1.4 mm DiamondNo. 14 Blade 1.0.02 0.17 220ANo. 248A 220/ lance withlance blunt withsides, blunt width sides 0.9 mm, angled 1.0 3.0No. 480.17 60° 20 NNo.No. o.220 2 2711 /4 lanceA/ lance / lance with with withblunt blunt blunt sides, sides sides, width width1.0 mm 1.4 mm, angled No. 20NNo.o. 71 14 widt1.0h 0.170.17 214SA 214S lance with blunt sides 1.2 3.0 0.17 60° 14S 40° NNo.o. 220 271A A/ lance/ lance with with blunt blunt sides, sides, width angled 1.0 mm, angled No. 20No. 71 1.0 0.17 214A 214 lance with blunt sides 1.4 3.0 0.17 60° 14 1.0 0.17 No. 214 / lance with blunt sides, width 1.4 mm No. 14 B D 221A 221 lance with blunt sides 3.2 4.0 0.17 60° 21 No.P HA214CA O/ lanceBLA withDES blunt sides, width 1.4 mm, angled No. 14

60° 1.0 60° 0.17 A spear 60° Diamond Knife Diamond Blade L 230APHACO B230LADES spear with blunt sides 1.0 2.0 0.17 90° 30 60° No. 208 / spear with blunt sides, width 2.5 mm No. 08 width 0.17 60° 219A 219 spear with blunt sides 1.0 4.0 0.17 90° 19 60° No. 208A / spear with blunt sides, width 2.5 mm, angled No. 08 width 0.17 widthA 0.17 229ADiamondNo. 243229 /K spearnife withspear blunt with sides, blunt width sides 2.8 mm 1.4 4.0DiamondN0.17o. 43Blade90° 29 L width 0.17 No. 208 / spear with blunt sides, width 2.5 mm No. 08 208A | 208 spear with blunt sides 2.5 4.0 0.17 90° 8 8 Amidia AG 0.1 TNeleo.fon 243 FAax / spear withInternet blunt sides, width 2.8 mm, angled No. 43 Mattenstwidth rasse 11 0.17 N+41o. 2 3208 333A / spear24 74 with [email protected] sides, width 2.5 mm, angled No. 08 width 0.17 243ANo. 222243 / spear withspear blunt with sides, blunt width sides 3.0 mm 2.8 4.0 N0.17o. 22 90° 43 8 | 0 CH-2555 Brügg N+41o. 243 32 333 / spear 24 76 with bluntwww sides,.amidi awidth.ch 2.8 mm No. 43 0 SwitzerlandB D 222ANo. 222222A / spear withspear blunt with sides,blunt sideswidth 3.0 mm, angled3.0 4.0 N0.17o. 22 90° 22 No. 243A / spear with blunt sides, width 2.8 mm, angled No. 43 0.1 223ANo. 223223 / spear withspear blunt with sides, blunt width sides 3.2 mm 3.2 4.0 N0.17o. 23 90° 23 No. 222 / spear with blunt sides, width 3.0 mm No. 22 278ANo. 223278A / spear withspear blunt with sides,blunt sideswidth 3.2 mm, angled3.5 4.0 N0.17o. 23 90° 78 B D No. 222A / spear with blunt sides, width 3.0 mm, angled No. 22

2.0 0.4 No. 223 / spear with blunt sides, width 3.2 mm No. 23 No. 223A / spear withtunnel blunt sides, width 3.2 mm, angled No. 23 239ATUNNE239L BLADEtunnelS 19 facets 1.4 4.0 0.17 39 2.0 0.4 254A 254 tunnel 19 facets 2.0 4.0 0.17 54 L 258ATUDiamondNNEL258 BL AKDEnifeS tunnel 19 facets 2.2 4.0 Diamond0.17 Blade 58 No. 239 / NEW tunnel 9 facets, width 1.4 mm No. 39 255A 255 tunnel 19 facets 2.5 4.0 0.17 55 Page 8 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY L DiamondNo. 239A K /ni NfeE W tunnel 9 facets, width 1.4 mm, angled DiamondNo. 3Blade9 238A 238 tunnel 19 facets 3.0 4.0 0.17 38 No.N o.23 2549 / N /E tunnelW tunnel 9 f acets,9 facets, width width 2.0 1.4 mm mm No. 39No. 54 B D width 0.17 No.N o.23 2549A /A N /E tunnelW tunnel 9 f acets,9 facets, width width 2.0 1.4 mm, mm, angled angled No. 39No. 54 newNo. 254 / tunnel 9 facets,clear width cornea 2.0 mm MICS micro coaxial surgery No. 54 B D 231ANo. 254A 231/ tunnel 9 facets,clear corneawidth 2.0 with mm, sharp angled sides 1.6 4.0No. 540.17 90° 31 235ACLEAR 235CORNEA clearBLA corneaDES with sharp sides 1.7 4.0 0.17 90° 35 236A 236 clear cornea with sharp sides 1.8 4.0 0.17 90° 36 A Diamond Knife Diamond Blade 90° 237A 237 clear cornea with sharp sides 1.9 4.0 0.17 90° 37 L No. 298 / clear cornea with sharp sides, width 2.5 mm No. 98 238A 238 clear cornea with sharp sides 2.0 4.0 0.17 90° 38 90° No. 298A / clear cornea with sharp sides, width 2.5 mm, angled No. 98 261A 261 clear cornea with sharp sides 2.1 4.0 0.17 90° 61 No. 295 / clear cornea with sharp sides, width 2.6 mm No. 95 262A 262 clear cornea with sharp sides 2.2 4.0 0.17 90° 62 No. 295A / clear cornea with sharp sides, width 2.6 mm, angled No. 95 263ANo. 277 263/ clear corneaclear with cornea sharp with sides, sharp width sides 2.8 mm 2.3 4.0 No.0.17 77 90° 63 widtB h 0.17D 265ANo. 277A265 / clear corneaclear withcornea sharp with sides, sharp width sides 2.8 mm,2.4 angled 4.0 No.0.17 77 90° 65 width 0.17 No. 273 / clear cornea with sharp sides, width 3.0 mm No. 73 B = width / L = length / D = thickness / A = angle No. 273A / clear cornea with sharp sides, width 3.0 mm, angled No. 73 60° Amidia LTD MattenstrasseNo. 274 / clear 11 cornea with sharpphone sides, +41 width32 333 3.224 74 mm mail [email protected]. 74 CH-2555No. 2 7Brügg4A / clear cornea with sharpfax sides,+41 32 width 333 24 3.2 76 mm, angledweb www.amidia.chNo. 74 5

width 0.17

60° TAPERED SPEAR BLADES B

Diamond Knife Diamond Blade A width 0.17L No. 290 / spear 4 facets with sharp sides, width 2.5-3.0 mm No. 90 No. 290A / spear 4 facets with sharp sides, width 2.5-3.0 mm, angled No. 90 width No. 232 / spear 4 facets with sharp sides, width 2.75-3.2 mm No. 32

Amidia AG Telefon | Fax Internet 8 AmidiaMattenst AGrasse 11 TeleN+41o.fon 23232 | F 333axA /24 spear 74 4Internet [email protected] with sharp sides, width 2.75-3.2 mm, angled No. 32 8

Mattenstrasse 11 +41 32 333 24 74 [email protected] 8 | 0 0 CH-255590 °Brügg N+41o. 24032 333 / spear 24 76 4 facetswww with.ami disharpa.ch sides, width 3.0-3.2 mm No. 40 8 | 0 CSH-2555witzerland Brügg D +41 32 333 24 76 www.amidia.ch 0 Switzerland No. 240A / spear 4 facets with sharp sides, width 3.0-3.2 mm, angled No. 40 width No. 289 / spear 4 facets with sharp sides, width 3.2-3.5 mm No. 89 No. 289A / spear 4 facets with sharp sides, width 3.2-3.5 mm, angled No. 89

90° width 0.17

B1 TAPERED SPEAR BLADES

width 0.17 A Diamond Knife Diamond Blade L No. 288 / spear 6 facets with sharp sides, width 2.65-3.2 mm No. 88 No. 288A / spear 6 facets with sharp sides, width 2.65-3.2 mm, angled No. 88

B D

Amidia AG Telefon | Fax Internet 8 Mattenstrasse 11 +41 32 333 24 74 [email protected] 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland Diamond cutting instruments for microsurgery

Page 8 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY angled straight drawing holder holder description B1/B L D A/A1 blade width 0.17 clear cornea 60° 297A 297 clear cornea with sharp sides 3.0 4.0 0.17 60° 97 234ACLEAR234 CORNEAclear BL AcorneaDES with sharp sides 3.2 4.0 0.17 60° 34 clear cornea 90° A 298ADiamond298 Knife clear cornea with sharp sides 2.5 4.0 Diamond0.17 90° Blade 98 L Page 8 DI272AAMNOo.N D2 C9U8272T /T IclearNG I N corneaSTRclearU M E N withcorneaTS FO sharpR MwithIC Rsides, OsharpS U R GEwidth sidesRY 2.5 mm2.6 4.0 N0.17o. 98 90° 72 295ANo. 298295A / clear corneaclear cornea with sharp with sharpsides, sides width 2.5 mm,2.65 angled4.0 N0.17o. 98 90° 95 width 0.17 277ANo. 295277 / clear corneaclear with cornea sharp with sides, sharp width sides 2.6 mm2.8 4.0 N0.17o. 95 90° 77 273ANo. 295273A / clear corneaclear cornea with sharp with sharpsides, sides width 2.6 mm,3.0 angled4.0 N0.17o. 95 90° 73

B D C274ALEARNo. CO 27RN7274 / EAclear BL corneaADEclearS with cornea sharp with sides, sharp width sides 2.8 mm3.2 4.0 N0.17o. 77 90° 74 293ANo. 277293A / clear corneaclear cornea with sharp with sharpsides, sideswidth 2.8 mm,3.5 angled4.0 N0.17o. 77 90° 93 A DiamondNo. 2 73Kni /f eclear cornea with sharp sides, width 3.0 mm Diamond Blade No. 73 L No. 2N9o.8 / 2 clear73A cornea / clear with cornea sharp withsides, sharpwidth 2.5 sides, mm width 3.0 mm,N angledo. 98 No. 73 Nnewo. 298A / clear cornea withtapered sharp sides, spear width MICS 2.5 mm, micro angled coaxial N surgeryo. 98 60° N279Ao. 295No. / 2clear74279 / cornea clear corneawithspear sharp with 4sides, facets sharp width with sides, 2.6 sharp mm width sides 3.2 mm1.1-1.4 No. 95 4.0 N0.17o. 74 90° 79 B1 N280Ao. 295No.A 2 /7 clear4280A /cornea clear withcorneaspear sharp 4with sides,facets sharp width with sides, 2.6 sharp mm, width sidesangled 3.2 mm,1.5-1.8N angledo. 95 4.0 N0.17o. 74 90° 80 No. 277 / clear cornea with sharp sides, width 2.8 mm No. 77 B D 282A 282 spear 4 facets with sharp sides 1.5-2.0 4.0 0.17 90° 82 A width 0.17No. 277A / clear cornea with sharp sides, width 2.8 mm, angled No. 77 L N284-01Ao. 273 / clear284-01 cornea withspear sharp 4sides, facets width with 3.0 sharp mm sides 1.7-2.0No. 73 4.0 0.17 90° 84-01 60° TAPERED SPEAR BLADES B N284Ao. 273A / clear284 cornea withspear sharp 4 sides,facets width with 3.0 sharp mm, sidesangled 1.8-2.2No. 73 4.0 0.17 90° 84 60° No. 274 / clear cornea with sharp sides, width 3.2 mm No. 74 284-02A 284-02 spear 4 facets with sharp sides 2.0-2.3 4.0 0.17 90° 84-02 No. 2Diamond74A / clear cornea Knife with sharp sides, width 3.2 mm, angled No. 74 Diamond Blade B A D 284-03A 284-03 spear 4 facets with sharp sides 2.4-2.7 4.0 0.17 90° 84-03 width 0.17L No. 290 / spear 4 facets with sharp sides, width 2.5-3.0 mm No. 90 width 0.17 No. 290A / spear 4 facets with sharp sides, width 2.5-3.0 mm, angled No. 90 60width° TAPERED SPEAR BLADES B No. 232 / spear 4 ftaperedacets with spear sharp 4 sides, facets width 2.75-3.2 mm No. 32 291ANo. 232291A / spear 4spear facets 4 facetswith sharp with sharpsides, sides width 2.75-3.22.5-3.0 mm,4.0 angled N0.10o. 32 90° 91 B1 Diamond Knife Diamond Blade A90° width 0.17L D N290Ao. 2N9o.0 / 240 spear290 / 4spear facets 4with fspearacets sharp 4with sides,facets sharp width with sides,2.5-3.0 sharp width mmsides 3.0-3.22.5-3.0 mmNo. 9 0 4.0 N0.17o. 40 90° 90 N292Ao. 2N9o.0A 240 / spear292A / 4spear facets 4withspear facets sharp 4 facetswith sides, sharp withwidth sharp sides,2.5-3.0 sides widthmm, angled 3.0-3.2 2.7-2.9N o.mm, 90 angled4.0 N0.17o. 40 90° 92 widthA No. 232 / spear 4 facets with sharp sides, width 2.75-3.2 mm No. 32 width L 232ANo. 289232 / spear 4 fspearacets 4with facets sharp with sides, sharp width sides 3.2-3.52.75-3.2 mm 4.0 N0.17o. 89 90° 32 No. 232A / spear 4 facets with sharp sides, width 2.75-3.2 mm, angled No. 32 No. 289A / spear 4 facets with sharp sides, width 3.2-3.5 mm, angled No. 89 90° 240A 240 spear 4 facets with sharp sides 3.0-3.2 4.0 0.17 90° 40 D No. 240 / spear 4 facets with sharp sides, width 3.0-3.2 mm No. 40 90° N233Ao. 240A / spear233 4 facets withspear sharp 4 facets sides, withwidth sharp 3.0-3.2 sides mm, angled 3.0-3.5No. 40 4.0 0.17 90° 33 width 0.17 width No. 289 / spear 4 facets with sharp sides, width 3.2-3.5 mm No. 89 B D 289A 289 spear 4 facets with sharp sides 3.2-3.5 4.0 0.17 90° 89 B1 No. 2T8A9PA ERE/ spearD 4 SP facetsEAR with B sharpLADE sides,S width 3.2-3.5 mm, angled No. 89

90° widthwidth 0.17 0.17 tapered spear 6 facets A Diamond Knife Diamond Blade B1 TA288APERED SP288EAR BLADEspearS 6 facets with sharp sided 2.65-3.2 4.0 0.17 90° 88 L No. 288 / spear 6 facets with sharp sides, width 2.65-3.2 mm No. 88 width 0.17 283A 283 spear 6 facets with sharp sides 3.0-3.2 4.0 0.17 90° 83 A DiamondNo. 2 8K8niAfe / spear 6 facets with sharp sides, width 2.65-3.2Diamond mm, angled Blade No. 88 L No. 288 / spear 6 facets with sharp sides, width 2.65-3.2 mm No. 88

B DNo. 288A / spear 6 facets with sharp sides, width 2.65-3.2 mm, angled No. 88

B D

B = width / L = length / D = thickness / A = angle

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 6

Amidia AG Telefon | Fax Internet 8 Mattenstrasse 11 +41 32 333 24 74 [email protected] 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland Amidia AG Telefon | Fax Internet 8 Mattenstrasse 11 +41 32 333 24 74 [email protected] 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland Page 12 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY Diamond cutting instruments for microsurgery

TITAN Bayonet Handle No. 300 DiamondPage 12 DI AknivesMON D CUTTI NG I NforSTR U M EcataractNTS FOR M ICROS U RGE RsurgeryY (titanium bajonet handle with the j-slot mechanism)

The Amidia bayonet handle is made out of best quality titanium or medical steel material. Each diamond blade goes with a straight blade holder or a 30 degree angled holder. TITAN Bayonet Handle No. 300

• The amidia bayonet handle is made out of best quality TITAN and MEDICAL STEEL material. • Available with all diamond blades you will ﬁnd in our leaﬂets, for pencil handle. also available in • Each diamond blade goes with a straight blade holder, or 30 degree angled holder a peek handle (A in the Article No. means 30 degree angled)

•S TATNheD amidiaARD BbayonetLADES handle is made out of best quality TITAN and MEDICAL STEEL material. • Available with all diamond blades you will ﬁnd in our leaﬂets, for pencil handle. A L angledDiamond straight Knif e Diamond Blade drawing holder• Eachholder diamonddescription blade goes with a straight blade holdeB r, or 30L degree Dangled holderA/A1 blade No. (311A in /the str aightArticle No. means 30 degree angled) No. 11 45° No. 311A / straight,straight angled / single edge No. 11

45° 316A 316 straight 0.7 2.0 0.17 30° 16 B D 45° 387A 387 straight 1.0 2.0 0.17 30° 87 1.0 0.17 STANDARD BLADES 312A 312 straight 1.0 3.0 0.17 30° 12 1.0 0.17 364SASTAND364SARD BLstraightADES 1.5 4.0 0.17 30° 64 1.A0 0.17L Diamond Knife Diamond Blade No. 311 / straight No. 11 30A° L 315ADiamond315 Knife straight 0.7 2.0 0.17Diamond45° Blade15 45° No. 311A / straight, angled No. 11 311ANo. 312311 / straight straight 1.0 3.0 0.17No. 12 45° 11 45° 30B ° D 310ANo. 312310A / straight,straight angled 1.5 3.0 0.17No. 12 45° 10 1.450° 0.17 1.0 0.17 30° B D 311SA 311S straight 2.0 3.0 0.17 45° 11S 1.0 0.17 45° 1.0 30° 0.17 STANDARD BLADES 1.0 0.17 45° 1.0 30° 0.17 tri-facet A 3F STANDARD BLADES 30A° A1 L 317ADiamond317 Knife tri-facet 0.7 2.0 0.17Diamond45°/30° Blade17 3F 313A 313 tri-facet 1.0 3.0 0.17 45°/30° 13 45° 30° No. 312 / straight No. 12 3F L Diamond Knife Diamond Blade 30° No. 312A / straight, angled No. 12 1.0 0.17 No. 313 / tri-facet No. 13 303F° 1.B0 0.17D 1.0 0.17 No. 313A / tri-facet, angled No. 13 45° 1.0 30° 0.17 B D 45° 1.0 30° 0.17 A 3F1.0 0.17 STANDARD BLADES 40° A1 curved 3F 45° 40° 324A 324 curved 4 facets 1.0 3.0 0.17 24 30° STANDARD BLADES 3F L Diamond Knife Diamond Blade 404F° L No. 313 / tri-facet No. 13 1.3F0 0.17 A L Diamond Knife Diamond Blade 1.0 0.17 1.0 0.17 No. 313A / tri-facet, angled No. 13 1.0 0.17 No. 371 / lance with blunt sides No. 71 B D No. 371A / lance with blunt sides, angled No. 71 1.0 0.17 1.B0 D 0.17 40B ° D 40° 60° STANDARD BLADES 4060°°

60A ° L Diamond Knife Diamond Blade 1.0 0.17 B = width / L = length / D = thickness / A = angle widt60°h 0.17 1.0 0.17 No. 371 / lance with blunt sides No. 71 width 0.17 AmidiaNo. LTD 371 A / lance with blunt sides, angled No. 71 1.0 0.17 Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] width 0.17

AmidiaB AG D CH-2555Telefon Brügg | Fax Internet fax +41 32 333 24 76 web www.amidia.ch 7 8 Mattenstwidth rasse 11 0.17 +41 32 333 24 74 [email protected]

60° 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland60°

60°

widt60°h 0.17

width 0.17

Amidia AG Telefon | Fax Internet 8 Mattenstwidth rasse 11 0.17 +41 32 333 24 74 [email protected] 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland Page 12 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY

TITAN Bayonet Handle No. 300

• The amidia bayonet handle is made out of best quality TITAN and MEDICAL STEEL material. • Available with all diamond blades you will ﬁnd in our leaﬂets, for pencil handle. • Each diamond blade goes with a straight blade holder, or 30 degree angled holder (A in the Article No. means 30 degree angled)

STANDARD BLADES

A L Diamond Knife Diamond Blade No. 311 / straight No. 11 45° No. 311A / straight, angled No. 11

45° B D 45° 1.0 0.17

1.0 0.17 STANDARD BLADES 1.0 0.17 Diamond cutting instruments for microsurgery 30A° L Diamond Knife Diamond Blade 1.0 0.17 No. 312 / straight No. 12 30° No. 312A / straight, angled No. 12 1.0 0.17 30° B D

40 1.0 ° 0.170.17 Page45° 1.0 1303° 0.17 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY 45° 1.0 30° 0.17 A 3F0.2 STANDARD BLADES A1 3F 45°40° Page1.01. 01330° 0.170.17 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY 3F L Diamond Knife Diamond Blade No. 313 / tri-facet No. 13 1.3F0.02 0.17 STANDARD BLADES Front Back 1.0 0.17 No. 313A / tri-facet, angled No. 13 1.0 0.17 angled straight drawing2.65AB 0.17 D L holderDiamondholder Knifedescription B L DDiamondA/A1 Bladeblade 1.0 0.17 SNTAo.N 3D4A8 R/ Dlance BLA withDE Sblunt sides, width 0.9 mm No. 48 40° lance Front 0.2 Back No. 348A / lance with blunt sides, width 0.9 mm, angled No. 48 40° 318ASTAN318DARD BLlanceADE withS blunt sides 1.0 2.0 0.17 60° 18 2.65A 0.17 L B D DiamondNo. 320 / Klancenife with blunt sides, width 1.0 mm DiamondNo. 20 Blade 4040°° 348A 248 lance with blunt sides 0.9 3.0 0.17 60° 48 NNo.o. 3 43208 / Alance / lance with with blunt blunt sides, sides, width width 0.9 mm 1.0 mm, angled No. 4N8o. 20 A0.2 L 371ADiamond371 Knifelance with blunt sides 1.0 3.0 0.17Diamond40° Blade71 1.0 0.17 NNo.o. 3 4381A4 / lance withwith bluntblunt sides, sides, width width 0.9 1.4 mm, mm angled No. 4N8o. 14 320A 320 lance with blunt sides 1.0 3.0 0.17 60° 20 1.0 0.17 No. 371 / lance with blunt sides No. 71 B D NNo.o. 320 31 4/ Alance / lance with with blunt blunt sides, sides, width width 1.0 mm 1.4 mm, angled No. 20No. 14 40° 314SANo. 371314SA / lancelance with withblunt blunt sides, sides angled 1.2 3.0 0.17No. 71 60° 14S 1.1.00 0.170.17 No. 320A / lance with blunt sides, width 1.0 mm, angled No. 20 314A 314 lance with blunt sides 1.4 3.0 0.17 60° 14 B D No. 314 / lance with blunt sides, width 1.4 mm No. 14 321A 321 lance with blunt sides 3.2 4.0 0.17 60° 21 60° NPo.HA 314CAO / BlanceLADE withS blunt sides, width 1.4 mm, angled No. 14 1.0 0.17 60° spear 60° A L 330A 330 spear with blunt sides 1.0 2.0 0.17 90° 30 60° Diamond Knife Diamond Blade 319APHACO319 BLADESspear with blunt sides 1.0 3.0 0.17 90° 19 widt60°h 0.17 No. 308 / spear with blunt sides, width 2.5 mm No. 08 widt60h° 0.17 329ANo. 303298A / spearspear with bluntwith blunt sides, sides width 2.5 mm, angled1.4 4.0 0.17No. 08 90° 29 widtA h L0.17 Diamond Knife Diamond Blade width 0.17 307ANo. 343307 / spear withspear blunt with sides, blunt sideswidth 2.8 mm 2.2 4.0 0.17No. 43 90° 07 Amidia AG No.Tele 30fon8 / | spearFax with bluntInternet sides, width 2.5 mm No. 08 8 Mattenstwidth rasse0. 111 0.17 308AN+41o. 33243308 333A /24 spear 74 spear within [email protected] blunt sides, sides width 2.8 mm, angled2.5 4.0 0.17No. 43 90° 08 No. 308A / spear with blunt sides, width 2.5 mm, angled No. 08 8 | 0 CH-2555width Brügg 0.17 343A+41 32343 333 24 76 spearwww with.a mibluntdia.ch sides 2.8 4.0 0.17 90° 43 0 Switzerland No. 322 / spear with blunt sides, width 3.0 mm No. 22 B D No. 343 / spear with blunt sides, width 2.8 mm No. 43 322ANo. 322322A / spearspear with bluntwith blunt sides, sides width 3.0 mm, angled3.0 4.0 0.17No. 22 90° 22 0.1 No. 343A / spear with blunt sides, width 2.8 mm, angled No. 43 No. 323 / spear with blunt sides, width 3.2 mm No. 23 323ANo. 322323 / spear withspear blunt with sides, blunt width sides 3.0 mm 3.2 4.0 No. 0.1722 90° 23 D B 378ANNo.o. 322 323378A A/ spear/ spear withspear with blunt bluntwith sides, blunt sides, width sides width 3.0 3.2mm, mm, angled angled3.5 4.0 No. 0.1722No. 23 90° 78

2.0 0.4 No. 323 / spear with blunt sides, width 3.2 mm No. 23 No. 323A / spear withtunnel blunt sides, width 3.2 mm, angled No. 23 339ATUNNE339L BLADEtunnelS 19 facets 1.4 4.0 0.17 39 2.0 0.4 354A 354 tunnel 19 facets 2.0 4.0 0.17 54 L 358ATUNNEDiamond358L B LKAniDEfeStunnel 19 facets 2.2 4.0 0.17Diamond Blade58 No. 339 / NEW tunnel 9 facets, width 1.4 mm No. 39 Page 8 355ADIAMON355D CUTTI NtunnelG I N ST 19R U facetsM E NTS FOR M ICROS U RGE2.5RY 4.0 0.17 55 L 338ADiamondNo. 333539A K /ni NfEeW tunneltunnel 19 9 facetsfacets, width 1.4 mm, angled3.0 4.0 Diamond0.17No. 39 Blade 53

B D NNo.o. 3 33549 / N/ tunnelEW tunnel 9 facets, 9 facets, width width 2.0 1.4 mm mm No. 3N9o. 54 width 0.17 NNo.o. 3 33549A A/ N/ EtunnelW tunnel 9 facets, 9 facets, width width 2.0 1.4 mm, mm, angled angled No. 3N9o. 54 new clear cornea MICS micro coaxial surgery B D No. 354 / tunnel 9 facets, width 2.0 mm No. 54 331ANo. 354331A / tunnel 9clear facets, cornea width with 2.0 sharpmm, angled sides 1.6 4.0 No. 0.1754 90° 31 335ACLEAR335 CORNEAclear BLA corneaDES with sharp sides 1.7 4.0 0.17 90° 35 336A 336 clear cornea with sharp sides 1.8 4.0 0.17 90° 36 A Diamond Knife Diamond Blade 90° 337A 337 clear cornea with sharp sides 1.9 4.0 0.17 90° 37 L No. 298 / clear cornea with sharp sides, width 2.5 mm No. 98 338A 338 clear cornea with sharp sides 2.0 4.0 0.17 90° 38 90 No. 298A / clear cornea with sharp sides, width 2.5 mm, angled No. 98 ° 361A 361 clear cornea with sharp sides 2.1 4.0 0.17 90° 61 No. 295 / clear cornea with sharp sides, width 2.6 mm No. 95 362A 362 clear cornea with sharp sides 2.2 4.0 0.17 90° 62 No. 295A / clear cornea with sharp sides, width 2.6 mm, angled No. 95 363ANo. 277363 / clear corneaclear with cornea sharp with sides, sharp width sides 2.8 mm 2.3 4.0 No.0.17 77 90° 63 widtB h D0.17 365ANo. 277365A / clear corneaclear cornea with sharp with sides,sharp sideswidth 2.8 mm,2.4 angled 4.0 No.0.17 77 90° 65

width 0.17 No. 273 / clear cornea with sharp sides, width 3.0 mm No. 73 No. 273A / clear cornea with sharp sides, width 3.0 mm, angled No. 73 60° No. 274 / clear cornea with sharp sides, width 3.2 mm No. 74 B = width / L = length / D = thickness / A = angle No. 274A / clear cornea with sharp sides, width 3.2 mm, angled No. 74 Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] width 0.17 CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 8 60° TAPERED SPEAR BLADES B

Amidia AG NTo.ele 232fonA | F/ax spear 4 facetsInternet with sharp sides, width 2.75-3.2 mm, angled No. 32 8 Mattenstrasse 11 +41 32 333 24 74 [email protected] 8 Amidia90 AG° TNeleo.f on240 | F /ax spear 4 facetsInternet with sharp sides, width 3.0-3.2 mm No. 40 8 | 0 CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Mattenstrasse 11 D +41 32 333 24 74 [email protected]

Switzerland 8 | 0

CH-2555 Brügg +41No. 32240 333A 24/ spear76 4 fwwwacets.a miwithdia.ch sharp sides, width 3.0-3.2 mm, angled No. 40 0 Switzerland width No. 289 / spear 4 facets with sharp sides, width 3.2-3.5 mm No. 89 No. 289A / spear 4 facets with sharp sides, width 3.2-3.5 mm, angled No. 89

90° width 0.17

B1 TAPERED SPEAR BLADES

width 0.17 A Diamond Knife Diamond Blade L No. 288 / spear 6 facets with sharp sides, width 2.65-3.2 mm No. 88 No. 288A / spear 6 facets with sharp sides, width 2.65-3.2 mm, angled No. 88

B D

Amidia AG Telefon | Fax Internet 8 Mattenstrasse 11 +41 32 333 24 74 [email protected] 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland Diamond cutting instruments for microsurgery

Page 8 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY angled straight drawing holder holder description B1/B L D A/A1 blade width 0.17 clear cornea 60° 397A 397 clear cornea with sharp sides 3.0 4.0 0.17 60° 97 334ACLEAR334 CORNEAclear BL corneaADES with sharp sides 3.2 4.0 0.17 60° 34 clear cornea 90° A 398ADiamond398 Knife clear cornea with sharp sides 2.5 4.0 Diamond0.17 90° Blade 98 Page 8 L DIA372AMNONo.D 2C9U8372T T/I NclearG I N S corneaTRclearU M E N corneawithTS FO sharpR MwithICR sides,OsharpS U RGE widthsidesRY 2.5 mm2.6 4.0 N0.17o. 98 90° 72 395ANo. 298395A / clear corneaclear cornea with sharpwith sharp sides, sides width 2.5 mm,2.65 angled4.0 N0.17o. 98 90° 95 width 0.17 377ANo. 295377 / clear corneaclear corneawith sharp with sides,sharp widthsides 2.6 mm2.8 4.0 N0.17o. 95 90° 77 373ANo. 295373A / clear corneaclear cornea with sharp with sharp sides, sides width 2.6 mm,3.0 angled4.0 N0.17o. 95 90° 73 CLEAR CORNEA BLADES B D 374ANo. 277374 / clear corneaclear withcornea sharp with sides, sharp widthsides 2.8 mm3.2 4.0 N0.17o. 77 90° 74 393ANo. 277393A / clear corneaclear cornea with sharp with sharp sides, sides width 2.8 mm,3.5 angled4.0 N0.17o. 77 90° 93 A Diamond Knife Diamond Blade L No. 2N98o. / clear273 cornea/ clear with cornea sharp with sides, sharp width sides,2.5 mm width 3.0 mm No. 98 No. 73 No.new 2N98o.A /2 clear73A cornea/ clear with corneatapered sharp with sides, spear sharp width MICS 2.5sides, mm, micro width angled coaxial 3.0 mm,N surgery o.angled 98 No. 73 60° No.379A 295No. / clear274379 cornea/ clear with corneaspear sharp with 4sides, facets sharp width with sides,2.6 sharp mm width sides 3.2 mm1.1-1.4 No. 95 4.0 N0.17o. 74 90° 79 No. 295A / clear cornea with sharp sides, width 2.6 mm, angled No. 95 B1 380ANo. 274380A / clear corneaspear 4 with facets sharp with sides, sharp widthsides 3.2 mm,1.5-1.8 angled4.0 N0.17o. 74 90° 80 B D No. 277 / clear cornea with sharp sides, width 2.8 mm No. 77

A No.382A 277A / clear382 cornea withspear sharp 4 sides,facets width with 2.8 sharp mm, sidesangled 1.5-2.0No. 77 4.0 0.17 90° 82 width 0.17 L No.384-01A 273 / clear384-01 cornea withspear sharp 4sides, facets width with 3.0 sharp mm sides 1.7-2.0No. 73 4.0 0.17 90° 84-01 60° No. 2T73AAP /ERE clear Dcornea SPEAR with sharp BLA sides,DES width 3.0 mm, angled No. 73 B 384A 384 spear 4 facets with sharp sides 1.8-2.2 4.0 0.17 90° 84 60° No. 274 / clear cornea with sharp sides, width 3.2 mm No. 74 384-02A 384-02 spear 4 facets with sharp sides 2.0-2.3 4.0 0.17 90° 84-02 No. 2Diamond74A / clear cornea Knif withe sharp sides, width 3.2 mm, angled No. 74 Diamond Blade B D 384-03A 384-03 spear 4 facets with sharp sides 2.4-2.7 4.0 0.17 90° 84-03 A No. 290 / spear 4 facets with sharp sides, width 2.5-3.0 mm No. 90 widthwidth 0.17 0.17L No. 290A / spear 4 facets with sharp sides, width 2.5-3.0 mm, angled No. 90 60° TAPERED SPEAR BLADES B tapered spear 4 facets width No. 232 / spear 4 facets with sharp sides, width 2.75-3.2 mm No. 32 391A 391 spear 4 facets with sharp sides 2.5-3.0 4.0 0.10 90° 91 B1 DiamondNo. 232 KniAfe / spear 4 facets with sharp sides, width 2.75-3.2Diamond mm, angled Blade No. 32 A 390A 390 spear 4 facets with sharp sides 2.5-3.0 4.0 0.17 90° 90 width 90° 0.17L No. 290 / spear 4 facets with sharp sides, width 2.5-3.0 mm No. 90 D No. 240 / spear 4 facets with sharp sides, width 3.0-3.2 mm No. 40 No.392A 290A / spear392 4 facets withspear sharp 4 facets sides, withwidth sharp 2.5-3.0 sides mm, angled2.7-2.9 No. 90 4.0 0.17 90° 92 A No. 240A / spear 4 facets with sharp sides, width 3.0-3.2 mm, angled No. 40 width No. 232 / spear 4 facets with sharp sides, width 2.75-3.2 mm No. 32 L 332A 332 spear 4 facets with sharp sides 2.75-3.2 4.0 0.17 90° 32 width No. 232No.A /2 spear89 / spear4 facets 4 with facets sharp with sides, sharp width sides, 2.75-3.2 width mm, angled3.2-3.5 N mmo. 32 No. 89

90° 340A 340 spear 4 facets with sharp sides 3.0-3.2 4.0 0.17 90° 40 D No. 240No. / spear289A 4 /f acetsspear with 4 fsharpacets sides, with width sharp 3.0-3.2 sides, mm width 3.2-3.5No. mm, 40 angled No. 89 333A 333 spear 4 facets with sharp sides 3.0-3.5 4.0 0.17 90° 33 90° No. 240A / spear 4 facets with sharp sides, width 3.0-3.2 mm, angled No. 40 widthwidth 0.17 B D No.389A 289 / spear389 4 facets withspear sharp 4 sides,facets width with 3.2-3.5 sharp mmsides 3.2-3.5No. 89 4.0 0.17 90° 89 No. 289A / spear 4 facets with sharp sides, width 3.2-3.5 mm, angled No. 89 B1 TAPERED SPEAR BLADES 90° width 0.17 tapered spear 6 facets width 0.17 B1 A TA388APEREDiamondD SP388EAR K BniLfAeDE spearS 6 facets with sharp sided 2.65-3.2 4.0 Diamond0.17 90° Blade 88 L width 0.17 383ANo. 288383 / spear 6 spearfacets 6 with facets sharp with sides,sharp widthsides 2.65-3.23.0-3.2 mm 4.0 N0.17o. 88 90° 83 A DiamondNo. 2 K8ni8Afe / spear 6 facets with sharp sides, width 2.65-3.2Diamond mm, angled Blade No. 88 L No. 288 / spear 6 facets with sharp sides, width 2.65-3.2 mm No. 88 No. 288A / spear 6 facets with sharp sides, width 2.65-3.2 mm, angled No. 88 B D

B D

B = width / L = length / D = thickness / A = angle

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 9

Amidia AG Telefon | Fax Internet 8 Mattenstrasse 11 +41 32 333 24 74 [email protected] 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland

Amidia AG Telefon | Fax Internet 8 Mattenstrasse 11 +41 32 333 24 74 [email protected] 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland Diamond cutting instruments for microsurgery

Diamond knives for glaucoma surgery

drawing article no. description B B1 L D A blade Zaldivar multi purpose knife

B1 333-01 1.0 0.55 4.5 0.17 33-01

B D

knife with straight holder 301-01 0.5 3.5 0.2 20° 01-01

A L

B D

step knife

B1 820-01 1.0 0.3 3.5 0.17 25° 20-01 steps: 0.15, 0.2, 0.25, 0.3, 0.37, 0.5, 4.0

A L 0 0.50

4.00

0 0.50

B D

B = width / L = length / D = thickness / A = angle

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 10 Diamond cutting instruments for microsurgery

Diamond knives for LRI surgery

drawing article no. description B B1 L D A blade with 3 settings: 0.5, 0.55, 0.6

B1 820-02 1.0 0.4 3 0.1 20° 20-02

0.50 S 0.55

A 0.60

L 0.55 0.50

B D with 1 setting

B1 820-02-01 0.5 1.0 0.4 3 0.1 20° 20-02 820-02-02 0.55 1.0 0.4 3 0.1 20° 20-02 820-02-03 0.6 1.0 0.4 3 0.1 20° 20-02 S

A L

B D Donnenfeld LRI knife B B1 S D A blade 820-03 1 setting at 0.6 0.8 0.25 0.6 0.17 20° 20-03 B B1 Features: • single footplate design with

S a fixed depth of 0.6mm • the shorter handle

A length promotes ease of use under the microscope or at the slit lamp

D • the blade assembly retracts into handle for safe storage

Nichamin LRI knife B B1 S D A blade 820-04 0.8 0.2 0.6 0.1 15° 20-04 B1 Features:

S • very small footplate • diamond with a micro flip • better visualization for the surgeon • accurate for techniques utilizing pachymetry A • excellent control while creating the incision • steps: 0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75

0.60 0 0.65

0.70

0.65

B D 0 0.60

B = width / L = length / D = thickness / A = angle

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 11 Page 27 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY PPageage 2277 DIDIAAMMOONNDD CCUUTTTTIINNGG IINNSSTTRRUUMMEENNTTSS FOFORR MMIICCRROOSSUURRGEGERRYY

Diamond cuttingTI TIinstrumentsTTANAN MicMicMicr rforometerometer microsurgery HandleHandle No.No. 550000

DiamondPage 27 DI AknivesMON D CUTTI NG I NwithSTR U M E NT S aFOR micrometerM ICROS U RGERY for refractive surgery

Each depth can be• adjustedThe amidia without micrometer steps. handle is made out of best quality TITAN and MEDICAL STEEL material. TI•• TTTANhehe amidiaamidia Mic micmicrometerrrometerometer handlehandle Handle isis mademade outoutNo. ofof bestbest500 qualityquality TITITTAANN andand MMEEDDIICCAALL SSTTEEEELL material.material. The scale is divided• eachEach hundredthdepth of the blademillimeter can be tadjusted = blade without thickness steps. Tofhe 0.1mm. scale is divided each hundredth millimeter. •• EEachach depthdepth ofof thethe bladeblade cancan bebe adjustedadjusted withoutwithout steps.steps. TThehe scalescale isis divideddivided eacheach hundhundrredthedth millimetemillimeterr.. • Available with all diamond blades you will find in our leaflets, for micrometer handle. •• AAvailablevailable withwith allall diamonddiamond bladesblades youyou willwill findfind inin ourour leaflets,leaflets, fforor micmicrrometerometer handle.handle.

STANDARD BLADES 15 SSTTAANNDDAARRDD BBLLAADEDESS 20 25

30 15 A L Diamond Knife 25 Diamond Blade AA LL DiamondDiamond KKniniffee DiamondDiamond BladeBlade

NNo.o. 511511 // ststrraightaight 20 NNo.o. 1111 No. 511 / straight 15 No. 11 45° • The amidia micrometer handle is made out of best quality TITAN and MEDICAL STEEL material. 45 No. 511T / straight No. 11 45°° NNo.o. 511511TT // ststrraightaight NNo.o. 1111 45° • Each depth of the blade can be adjusted without steps. The scale is divided each hundredth millimeter. 4545B ° D B° D 45B° D • Available with all diamond blades you will ﬁnd in our leaﬂets, for micrometer handle. 45° 1.450° 0.17 451.1.0°0 0.170.17 drawing4545° article no. description B L D A/A1 blade 1.0° 0.17 1.1.00 0.170.17 straightSTAND ARD BLADES 1.0 0.17 SSTTAANNDDAARRDD BBLLAADEDESS 1.1.00 0.170.17 STANDARD BLADES 1.0 0.17 511 straight 1.0 3.0 0.17 45° 11 1.1.00 0.170.17 30A° L Diamond Knife Diamond Blade 3030A° L 511t straight 0.9 3.0 0.1 45° 11t A° L DiamondDiamond KKniniffee DiamondDiamond BladeBlade A L NDiamondo. 512 / st Kraightnife NDiamondo. 12 Blade NNo.o. 551122 // ststrraightaight NNo.o. 1122 30° No. 511 / straight No. 11 30 No. 512T / straight No. 12 1.300°° 0.17 512No. 512T / straightstraight 1.0 3.0 N0.17o. 12 30° 12 1.0 0.17 No. 512T / straight No. 12 301.450°° 0.17 30 No. 511T / straight No. 11 30B °° D B D 512t straight 1.0 3.0 0.1 30° 12t 3045B° D 30°° 45 30B° D ° 1.0 30° 0.17 4545° 1.450° 30 0.17 ° 1.0 30°° 0.17 45 1.1.00 0.17 ° 3F 30° 45°1.451.3F00° 0.170.17 tri-facet 45° 3F 3030° A1.0 ° 0.17 STANDARD BLADES A3F1.0 A1 0.17 STANDARD BLADES A1.1.00 A1 0.170.17 513STANDARD BLAtri-facetDES 1.0 3.0 0.17 45° / 30° 13 3F3F A1 STANDARD BLADES 45° 1.0 0.17 45° 3F 30° 45° 3F 30° 513t tri-facet 1.0 3.0 0.1 45° / 30° 13t 3F 30° L 45° 1.0 0.17 Diamond Knife Diamond Blade 3F 30° LL Diamond Knife Diamond Blade 4545° 3F 30 Diamond Knife Diamond Blade ° 303FA° 30°° L NDiamondo. 513 / tri- Kfniacetfe NDiamondo. 13 Blade 1.3F0 0.17 No. 513 / tri-facet No. 13 3F No. 513 / tri-facet No. 13 1.3F1.00 0.170.17 No. 5132T / /st tri-raightfacet No. 132 1.0 0.17 NNo.o. 551133TT // tri-tri-ffacetacet NNo.o. 1133 301.1.0°0 0.170.17 No. 512T / straight No. 12 1.B0 0.17D 30BB° DD 1.B0 0.17D 301.1.0°0 0.170.17 45 ° 1.1.00 30° 0.170.17 1.451.00 ° 0.170.17 axe 45 ° 45 1.450 ° 0.17 STANDARD BLADES ° 3F 30° STANDARD BLADES 45° 525STANDARD BLAaxeDES 1.5 3.0 0.17 45° 25 45 A1.045°° 0.17 STANDARD BLADES 3F A1 45° 525t axe 1.5 3.0 0.1 45° 25t A 45 L 45° 45°° Diamond Knife Diamond Blade 3F1.AA5 30° 0.17LL DiamondDiamond KKniniffee DiamondDiamond BladeBlade 1.1.55 0.170.17 45 L Diamond Knife Diamond Blade ° 3F 30° No. 525 / axe No. 25 1.455° 0.17 NNo.o. 525525 // axeaxe NNo.o. 2525 1.455 0.17 1.455°° 0.17 No. 525513 T/ /tri- axefacet No. 2513 1.3F1.05 0.17 NNo.o. 525525TT // axeaxe NNo.o. 2525 1.1.55 0.170.17 No. 513T / tri-facet No. 13 1.0B 0.17D BB DD 1.B5 D0.17 1.1.55 0.170.17 1.0 0.17 triple edge vertical

1.0 0.17 526STANDARD BLAtripleDES edge vertical 1.0 3.0 0.17 26 45 ° SSTTAANNDDAARRDD BBLLAADEDESS STANDARD BLADES 1.0 0.17 526t triple edge vertical 1.0 3.0 0.1 26t 1.450 ° 0.17 1.0 0.17L Diamond Knife Diamond Blade 1.0 0.17LL Diamond Knife Diamond Blade 1.450 ° 0.17 Diamond Knife Diamond Blade 1.A0 0.17L NDiamondo. 526 / triple Kni fedgee vertical NDiamondo. 26 Blade 1.01.5 0.17 NNo.o. 526526 // tripletriple edgeedge vverticalertical NNo.o. 2626 1.1.00 0.170.17 No. 526525T / /axe triple edge vertical No. 2625 1.01.455° 0.17 No. 526T / triple edge vertical No. 26 1.1.00 0.170.17 No. 526T / triple edge vertical No. 26 B D No. 525T / axe No. 25 1.5 0.17 BB DD B D

Amidia AG Telefon | Fax Internet 8 | 8 MattenstAmidiaAmidia1.5 rAGAGasse 11 0.17 +41TTeleele f32fonon 333 | FFax ax24 74 [email protected] 8 MattenstMattenstrrasseasse 1111 +41+41 3232 333333 2424 7744 [email protected]@amidia.ch 8 | 0 8 | 0 CH-2555 Brügg B =+41 width 32 333/ L =24 length 76 / D =www thickness.amidia ./ch A = angle 0 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 SCwitzerlandH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland STANDARD BLADES Switzerland Amidia LTD

1.0 0.17 Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] L CH-2555Diamond Brügg Knife fax +41 32 333 24 76 web www.amidia.chDiamond Blade 12 1.0 0.17 No. 526 / triple edge vertical No. 26 1.0 0.17

1.0 0.17 No. 526T / triple edge vertical No. 26

B D

Amidia AG Telefon | Fax Internet 8 Mattenstrasse 11 +41 32 333 24 74 [email protected] 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland Diamond cutting instruments for microsurgery

15 20 25

30 15 25

20 15

PPageage 2828 DIDIAAMMOONNDD CCUUTTTTIIINNGG IIINNSSTTRRUUMMEENNTTSS FOFORR MMIIICCRROOSSUURRGEGERRYY

drawing article no. description B L D A blade double edge vertical SSTTAANNDDAARRDD BBLLAADEDESS 527 double edge vertical 1.0 3.0 0.17 45° 27 527t double edge vertical 1.0 3.0 0.1 45° 27t A L Diamond Knife Diamond Blade A LL Diamond Knife Diamond Blade

45° No. 527 / double edge vertical No. 27 4545°° No. 527 / double edge vertical No. 27 No. 527T / double edge vertical No. 27 45° No. 527T // doubledouble edgeedge vertical No. 27 4545°° B D B45° D 4545°° 1.0 0.17 1.1.00 0.170.17

1.0 0.17 1.1.00 0.170.17 single edge vertical 1.0 0.17 STANDARD BLADES 1.0 0.17 528STANDARD BLAsingleDES edge vertical 1.0 3.0 0.17 45“ 28 1.1.00 0.170.17 45° 528t single edge vertical 1.0 3.0 0.1 45“ 28t 4545°° 45A° L A LL DiamondDiamond KKniniffee DiamondDiamond BladeBlade No. 528 / single edge vertical No. 28 45° No. 528 / single edge vertical No. 28 4545°° No. 528T // singlesingle edgeedge vertical No. 28 1.450 ° 0.17 No. 528T / single edge vertical No. 28 1.1.454500 °° 0.170.17 B D B D

0.2 0.1.0.202 0.17 1.1.00 0.170.17 0.2 0.0.22 arcuate (thornton) 1.150 0.17 1.1.151500 ° 0.170.17 0.152°° STANDARD BLADES 0.0.22 533tSTANDARD BLAarcuateDES (thornton) 1.0 3.0 0.1 15° 33t 0.152° 1515°° 0.A2 0.0.A22 DiamondDiamond KKniniffee DiamondDiamond BladeBlade L Diamond Knife Diamond Blade 15° LL 1515°° No. 533T / arcuate (Thornton) No. 33 1.0 0.17 No. 533T // aarcuate (Thornton) No. 33 1.1.00 0.170.17 1.0 0.17 1.1.00 0.170.17

0.25 B D 0.250.25 B D 0.25 0.250.25 1.0 0.17 1.1.00 0.170.17 0.25 amidia trak 0.250.25 45° 4545°° STANDARD BLADES 0.25 45° 566STANDARD BLAamidia-trakDES 1.0 3.0 0.17 45° 66 0.250.25 4545°°

45° 4545°° A L Diamond Knife Diamond Blade 1.A0 0.17LL Diamond Knife Diamond Blade 1.1.00 0.170.17 1.0 0.17 No. 566 / amidia-trak No. 66 1.1.00 0.170.17 No. 566 / amidia-trak No. 66

1.0 0.17 1.1.00 0.170.17

B D B D

B = width / L = length / D = thickness / A = angle

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 13

| 8 8 Amidia AG Telefon Fax Internet 8 Amidia AG Teleffon || Fax InternetInternet 8 MattenstMattenstrrrasseasse 1111 +41+41 3232 333333 2424 7744 [email protected]@amidia.ch Mattenstrasse 11 +41 32 333 24 74 [email protected] 8 | 0 8 | 0 8 | 0 8 | 0 CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 0 0 CH-2555 Brügg +41 32 333 24 76 www..amidia..ch 0 SSwitzerlandwitzerland DiamondPage 20 cutting DIinstrumentsAMON D CUTTI NforG I NmicrosurgerySTR U M E NTS FOR M ICROS U RGERY

DiamondTI knivesTAN Retina Handlefor retinal No. 300 surgery (with a titanium handle)

• The amidia retina handle is made out of TITAN bayonet and used predominantly for Glaucoma surgery. • Available with all diamond blades you will find in our leaflets, for retina handle. • We also manufacture to client specifications.

drawing article no. description B L D A blade 301RSTANDARD BLAretinaDES straight 0.5 3.0 0.17 20° 1 302R retina straight 0.9 3.0 0.17 45° 2 A L 311RDiamond Knife straight 45° (retina) 1.0 3.0 0.17Diamond45° Blade 11 No. 301 / NEW retina straight No. 01

20°

B D

0.5 0.17

STANDARD BLADES 45°

45° Diamond Knife Diamond Blade No. 302 / NEW retina straight No. 02

0.9 0.17

B = width / L = length / D = thickness / A = angle

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 14

Amidia AG Telefon | Fax Internet 8 Mattenstrasse 11 +41 32 333 24 74 [email protected] 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland Diamond cutting instruments for microsurgery

Page 32 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY Page 32 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY Page 32 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY Page 32 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY Step diamond knives Available with all diamondTITAN blades Seven-Step you will find Handle in our leaflets No. 8for00 seven step handle. TITAN Seven-Step Handle No. 800 TITITTANAN SeSevven-Stepen-Step HandleHandle No.No. 880000

0 .80

1.00

2.50 1.00

0 .80

• The amidia seven-step handle is made out of best quality TITAN and MEDICAL STEEL material. • TAhevailable amidia with sev allen-step diamond handle blades is made and dif outfe rofent best depths quality you TI willTAN find and in M ourED leaflets,ICAL S TforEE seL material.ven-step handle. • The amidia seven-step handle is made out of best quality TITAN and MEDICAL STEEL material. drawing article•• TAhe vailableno. amidia with sev descriptionen-stepall diamond handle blades is made and difoutfe ofrent best depths qualityB you TI willTLAN find and in M DourED leaflets,ICALA/A1 ST fEorE Lse material.vbladeen-step handle. •• AAvailablevailable withwith allall diamonddiamond bladesblades andand difdifffeerrentent depthsdepths youyou willwill findfind inin ourour leaflets,leaflets, fforor sesevven-stepen-step handle.handle. straight 811STANDARD BLAstraightDES 1.0 3.0 0.17 45° 11 STANDARD BLADES STANDARD BLstepsADE Sat 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm A L SDiamondTANDAR KDni BfLeA DES Diamond Blade A L ° DiamondNo. 811 / st Kraight,nife depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm DiamondNo. 11 Blade A L Diamond Knife Diamond Blade A ° L DiamondNo. 811 / st Kraight,nife depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm DiamondNo. 11 Blade ° No. 811 / straight, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 11 ° No. 811 / straight, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 11 B D 7 B D 7 B D A B D 7 tri-facetSTANDARD BLADES A1 7 ° A 813STANDARD BLAtri-facetDES 1.0 3.0 0.17 45° / 30° 13 A1 ° A ° STANDARD BLADES 3F A1 L A 3F ° SDiamondTANDAR KDni BfLeA stepsDES at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm Diamond Blade A1 ° 3F ° 3F L DiamondNo. 813 / tri- Kfniacet,fe depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm DiamondNo. 13 Blade 3F 3F3F L Diamond Knife Diamond Blade 3F L DiamondNo. 813 / tri- Knifacet,fe depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm DiamondNo. 13 Blade NNo.o. 881133 // tri-tri-ffacet,acet, depthdepth atat 0/0.3/0.4/0.5/0.6/0.8/1.0/2.50/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mmmm NNo.o. 1133 1.B0 0.1D

1.B0 0.1D 1.B0 0.1D 1.B0 0.1D STANDARD BLADES doubleSTAN edgeDAR verticalD BLADES STANDARD BLADES A L 827SDiamondTANDAR KDni BfLeA doubleDES edge vertical 1.0 3.0 0.17 Diamond45° 27Blade 45° A L Diamond Knife steps at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm Diamond Blade 45° No. 827 / double edge vertical, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 27 45A° L A L Diamond Knife Diamond Blade 45° DiamondNo. 827 / double Knife edge vertical, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm DiamondNo. 27 Blade 45° No. 827 / double edge vertical, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 27 B D No. 827 / double edge vertical, depth at 0/0.3/0.4/0.5/0.6/0.8/1.0/2.5 mm No. 27 1.0 0.17 B D 1.0 0.17 B D 1.B 0 0.1D 7 PHACO BLADES 1.0 0.17 PHACO BLADES 90° spear 90° PHACO BLADES A L PHACO BLADES 90° Diamond Knife Diamond Blade 90° 822 spear with blunt sides 3.0 4.0 0.17 45° 22 A 90° L DiamondNo. 822 / spear Knif ewith blunt sides, width 3.0 mm DiamondNo. 22 Blade 9090°° 823 spear with blunt sides 3.2 4.0 0.17 45° 23 90A° L Diamond Knife Diamond Blade A L DiamondNo. 822823 / spear Knife with blunt sides, width 3.03.2 mm DiamondNo. 2223 Blade No. 822 / spear withsteps blunt at 0.15/0.2/0.25/0.3/0.37/0.5/4.0 sides, width 3.0 mm mm No. 22 width 0.17 NNo.o. 822823 // spearspear withwith bluntblunt sides,sides, widthwidth 3.03.2 mmmm NNo.o. 2223 widtB h 0.1D 7 No. 823 / spear with blunt sides, width 3.2 mm No. 23 width 0.17 widtB h 0.1D 7 No. 823 / spear with blunt sides, width 3.2 mm No. 23 width 0.17 widtwidtBhh 0.10.1D77 widtB h 0.1D 7 PHACO BLADES PHACO BLADES PHACO BLADES 60A L 60° PDiamondHACO B LKAniDEfe S Diamond Blade 60° other steps available as per customers request 60A° L 60° DiamondNo. 885 / lance Knif ewith blunt sides, width 3.0 mm DiamondNo. 85 Blade 60A° L 6060A°° L Diamond Knife Diamond Blade 60° DiamondNo. 882185 / lance Knif ewith blunt sides, width 3.23.0 mm DiamondNo. 8521 Blade 60° No. 885 / lance with blunt sides, width 3.0 mm No. 85 width 0.17 NNo.o. 882185 // lancelance withwith bluntblunt sides,sides, widthwidth 3.03.2 mmmm NNo.o. 8521 widtB h 0.1D 7 No. 821 / lance with blunt sides, width 3.2 mm No. 21 width 0.17 No. 821 / lance with blunt sides, width 3.2 mm No. 21 widtB h 0.1D 7 B = width / L = length / D = thickness / A = angle width 0.17 widtwidtBhh 0.10.1D77 widtB h 0.1D 7 Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 15

Amidia AG Telefon | Fax Internet 8

AmidiaMattenst AGrasse 11 T+41ele f32on 333 | Fax 24 74 [email protected] 8 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 MattenstAmidia rAGasse 11 +41Tele f32on 333 | Fax 24 74 [email protected] 8 8 AmidiaSwitzerland AG Telefon | Fax Internet 8 | 0 CMattenstH-2555r Brüggasse 11 +41 32 333 24 764 [email protected] 0 MattenstSwitzerlandrasse 11 +41 32 333 24 74 [email protected] 8 | 0 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 8 | 0 CSH-2555witzerland Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland Diamond cutting instruments for microsurgery

0 .50

4.000

0 .50

drawing article no. description B L D A blade lance 885 lance with blunt sides 3.0 4.0 0.17 60° 85

2.65A 0.17 821 lance with blunt sides 3.2 4.0 0.17 60° 21

0.2

Page40 °33 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY B D

clear cornea 60°

1.0 0.17 897 clear cornea with sharp sides 3.0 4.0 0.17 60° 97 834 clear cornea with sharp sides 3.2 4.0 0.17 60° 34 CLEAR CORNEA BLADES

A clear cornea 90° L Diamond Knife Diamond Blade 898 clear cornea with sharp sides 2.5 3.5 0.17 90° 98 No. 898 / clear cornea with sharp sides, width 2.5 mm No. 98 895 clear cornea with sharp sides 2.6 3.5 0.17 90° 95 No. 895 / clear cornea with sharp sides, width 2.6 mm No. 95 877 clear cornea with sharp sides 2.8 3.5 0.17 90° 77 B D No. 877 / clear cornea with sharp sides, width 2.8 mm No. 77 873No. 873 / clear corneaclear with cornea sharp with sides, sharp width sides 3.0 mm 3.0 3.5 No. 730.17 90° 73 874No. 874 / clear corneaclear with cornea sharp with sides, sharp width sides 3.2 mm 3.2 3.5 No. 70.174 90° 74

60° Glaucoma B B1 L D A blade

B1 820-01 1.0 0.3 3.5 0.17 25° 20-01 steps: 0.15, 0.2, 0.25, 0.3, 0.37, 0.5, 4.0

width 0.17 A L other steps available as per customers request

B D

one step handle tri-facet 309-F tri-facet, depth at 0.28 1.0 0.17 60° 9 A 209-F tri-facet, depth at 0.3 1.0 0.17 60° 9 L

B D one step handle straight 315-F straight, depth at 0.28 0.7 0.17 45° 15

A L 215-F straight, depth at 0.3 0.7 0.17 45° 15

B D B = width / L = length / D = thickness / A = angle

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 16

Amidia AG Telefon | Fax Internet 8 Mattenstrasse 11 +41 32 333 24 74 [email protected] 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland Diamond cutting instruments for microsurgery

Page 35 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY Page 35 DIAMON D CUTTI NG I N STR U M E NTS FOR M ICROS U RGERY Diamond knives for neuro surgery The amidia neuro surgeryTITAN handles Neur areo Handle available No.with aN200 straight or angled holder. TITAN Neuro Handle No. N200

amidia amidia

15° 15° • Superior performance, unmatched precision •• SuperiorFor more per information,formance, contact unmatched us today! precision drawing article• F orno. more information,description contact us today! B L D A blade angled straight N250ASTANN250DARD BLstraight,ADES single sided 1.0 3.0 0.17 30° 50 N267ASTANDN267ARD BLstraight,ADES single sided 1.0 3.0 0.17 45° 67 A L Diamond° Knife Diamond Blade A L DiamondN° o. N267 /K stniraight,fe 45˚ single sided, 1.0 x 0.17 x 6 mm DiamondNo. 67 Blade No. N267 / straight, 45˚ single sided, 1.0 x 0.17 x 6 mm No. 67 °

B D °

B D lanceSTANDARD BLADES N268ASTANDN268ARD BLlance,ADES single sided 1.0 3.0 0.17 60° 68 A L N251ADiamondN251 Knifelance, single sided 1.4 3.0 0.17 Diamond60° 51Blade A L DiamondNo. N268 /K Lniancefe 60˚ single sided, 1.0 x 0.17 . 6 mm DiamondNo. 68 Blade No. N268 / Lance 60˚ single sided, 1.0 x 0.17 . 6 mm No. 68 °

B D °

B D STANDARD BLADES roundSTANDARD BLADES L N269ADiamondN269 Kniferound 7 facets single sided 1.0 4.0 0.17 Diamond 69Blade L DiamondNo. N269 /K roundnife 7 facets, single sided, 1.0 x 0.17 x 6 mm DiamondNo. 69 Blade L No. N269 / round 7 facets, single sided, 1.0 x 0.17 x 6 mm No. 69 °

B D °

B D

B D SPECIAL BLADES specialSPECIAL BLADES

B D DiamondN281 Knifetriple edge vertical 1.5 1.8 0.17 Diamond60° 81Blade B D B D DiamondNo. N281 /K specialnife straight, 60˚, 1.45 x 0.17 x 1.8 mm DiamondNo. 81 Blade A No. N281 / special straight, 60˚, 1.45 x 0.17 x 1.8 mm No. 81 A

amidia amidia

B = width / L = length / D = thickness / A = angle

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 17

Amidia AG Telefon | Fax Internet 8 Mattenstrasse 11 +41 32 333 24 74 [email protected] 8 Amidia AG Telefon | Fax Internet 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 MattenstSwitzerlandrasse 11 +41 32 333 24 74 [email protected] 8 | 0

CH-2555 Brügg +41 32 333 24 76 www.amidia.ch 0 Switzerland Diamond cutting instruments for microsurgery

Zeppelin diamond knives for neuro surgery

For extremly delicate micro-incisions and dissections. The cutting edges are distinguished by their superb sharpness.

drawing article no. description B L D A blade

lance diamond knife, straight sharp, slightly upward PDD 011 angled tip 15% 1.40 3.0 0.17 60° A-51

A L working/total length 50 mm/170 mm

B D

lance diamond knife, straight sharp, slightly upward PDD 111 angled tip 15% 1.40 3.0 0.17 60° A-51 working/total length 100 mm/220 mm

B D triple edge vertical diamond knife, straight, tip blunt, PDD 112 90° angled 1.40 0.17 60° A-81 working total length 100 mm/220 mm

triple edge vertical diamond knife, straight, tip sharp, PDD 113 90° angled 1.40 0.17 60° A-81 working total length 100 mm/220 mm

To order please contact Zeppelin Medical Instruments GmbH phone +43 (0) 5572 25677 Mozartstrasse 3 fax +43 (0) 5572 25679 A-6850 Dornbirn e-mail [email protected] Austria website www.zeppelin-medical.com

B = width / L = length / D = thickness / A = angle

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 18 Diamond cutting instruments for microsurgery

drawing article no. description B L D A blade

A L

lance diamond knife, straight sharp, slightly upward PDD 211 angled tip 15% 1.40 3.0 0.17 60° A-51 B D working/total length 120 mm/240 mm

A L lance diamond knife, straight sharp, slightly upward PDD 311 angled tip 15% 1.40 3.0 0.17 60° A-51 working/total length 100 mm/220 mm

B D lance diamond knife, straight sharp, slightly upward PDD 411 angled tip 15% 1.40 3.0 0.17 60° A-51 working/total length 120 mm/240 mm lance diamond knife, straight sharp, slightly upward PDD 511 angled tip 15% 1.40 3.0 0.17 60° A-51 working/total length 140 mm/260 mm

A L

vario diamond knife bayonet, sharp, slightly upward PDD 611 angled tip (15°) 1.40 3.0 0.17 60° A-51

B D working/total length 150 mm/270 vario diamond knife bayonet, sharp, slightly upward PDD 711 angled tip (15°) 1.40 3.0 0.17 60° A-51 working/total length 120 mm/240

B = width / L = length / D = thickness / A = angle

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 19 Diamond cutting instruments for microsurgery

Diamond knife for neuro surgery dura knife for dura opening

• Easy and fast cutting thanks to the extremely sharp diamond blade

• The precisely adjustable cutting depth allows a safe procedure

• Consistent cutting capabilities even after years of use

• Handle made of titanium and surface coated in high vacuum

0 0.30

DURA

0 0.30 0

drawing article no. description B L D blade

D B N269-01 dura knife 1.4 4.0 0.2 69-01

0.30 DURA

B = width / L = length / D = thickness / A = angle

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 20

Diamond cutting instruments for microsurgery

Cosmetic diamond knives for plastic surgery Cosmetic scalpels are much sharper than steel blades and they keep their sharpness even after many procedures. This enables the surgeon to have the highest precision and the cleanest cut

available. Incisions with diamond scalpels are easier to make; wounds heal better and faster.

article no. CVD-1310-Titan #11

article no. CVD-1320-Titan #15

B = width / L = length / D = thickness / A = angle

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 21 Diamond cutting instruments for microsurgery

Black diamond knives • Better visualization • Non-glare surface • Consistent, predictable & superior diamond edge incision • Reduced acquisition cost • Reduced repair cost • Available in titanium or peek handles

straight drawing angled holder holder description B1/B L D A blade lance CVD-1010-Titan-A CVD-1010-Titan lance 1.0 4.0 0.20 60° 1010 A CVD-1010-Peek-A CVD-1010-Peek lance 1.0 4.0 0.20 60° 1010 L CVD-1012-Titan-A CVD-1012-Titan lance 1.2 4.0 0.20 60° 1012 CVD-1012 Peek-A CVD-1012 Peek lance 1.2 4.0 0.20 60° 1012

B D

trapezoid CVD-1175-Titan-A CVD-1175-Titan tapered spear 1.5-1.8 4.0 0.20 90° 1175 CVD-1175-Peek-A CVD-1175-Peek tapered spear 1.5-1.8 4.0 0.20 90° 1175 CVD-1180-Titan-A CVD-1180-Titan tapered spear 2.5-2.8 4.0 0.20 90° 1180 CVD-1180-Peek-A CVD-1180-Peek tapered spear 2.5-2.8 4.0 0.20 90° 1180 B1 CVD-1182-Titan-A CVD-1182-Titan tapered spear 2.65-3.0 4.0 0.20 90° 1182

A CVD-1182-Peek-A CVD-1182-Peek tapered spear 2.65-3.0 4.0 0.20 90° 1182 L CVD-1183-Titan-A CVD-1183-Titan tapered spear 2.8-3.0 4.0 0.20 90° 1183 CVD-1183-Peek-A CVD-1183-Peek tapered spear 2.8-3.0 4.0 0.20 90° 1183 CVD-1184-Titan-A CVD-1184-Titan tapered spear 2.7-3.2 4.0 0.20 90° 1184 B D CVD-1184-Peek-A CVD-1184-Peek tapered spear 2.7.-3.2 4.0 0.20 90° 1184 CVD-1185-Titan-A CVD-1185-Titan tapered spear 2.5-3.5 4.0 0.20 90° 1185 CVD-1185-Peek-A CVD-1185-Peek tapered spear 2.5-3.5 4.0 0.20 90° 1185

spear 2 sides sharp CVD-1120-Titan-A CVD-1120-Titan spear 2.8 4.0 0.20 90° 1120 CVD-1120-Peek-A CVD-1120-Peek spear 2.8 4.0 0.20 90° 1120 A

L CVD-1123-Titan-A CVD-1123-Titan spear 3.0 4.0 0.20 90° 1123 CVD-1123-Peek-A CVD-1123-Peek spear 3.0 4.0 0.20 90° 1123 CVD-1125-Titan-A CVD-1125-Titan spear 3.2 4.0 0.20 90° 1125

B D CVD-1125-Peek-A CVD-1125-Peek spear 3.2 4.0 0.20 90° 1125

B = width / L = length / D = thickness / A = angle

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 22 Diamond cutting instruments for microsurgery

straight drawing angled holder holder description B L D A blade clear cornea - 4 sides sharp CVD-1150-Titan-A CVD-1150-Titan spear vc 2.20 4.0 0.20 90° 1150 CVD-1150-Peek-A CVD-1150-Peek spear vc 2.20 4.0 0.20 90° 1150 CVD-1158-Titan-A CVD-1158-Titan spear vc 2.65 4.0 0.20 90° 1158 CVD-1158-Peek-A CVD-1158-Peek spear vc 2.65 4.0 0.20 90° 1158

A CVD-1160-Titan-A CVD-1160-Titan spear vc 2.80 4.0 0.20 90° 1160 L CVD-1160-Peek-A CVD-1160-Peek spear vc 2.80 4.0 0.20 90° 1160 CVD-1162-Titan-A CVD-1162-Titan spear vc 3.0 4.0 0.20 90° 1162 CVD-1162-Peek-A CVD-1162-Peek spear vc 3.0 4.0 0.20 90° 1162 B D CVD-1164-Titan-A CVD-1164-Titan spear vc 3.20 4.0 0.20 90° 1164 CVD-1164-Peek-A CVD-1164-Peek spear vc 3.20 4.0 0.20 90° 1164

crescent CVD-1210 Titan-A CVD-1210 Titan 9-edge vertical 2.0 4.0 0.20 1210 CVD-1210-Peek-A CVD-1210-Peek 9-edge vertical 2.0 4.0 0.20 1210 L

B D

B = width / L = length / D = thickness / A = angle

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 23 Diamond cutting instruments for microsurgery

Cleaning liquid & accessories

cleaner Amidia rapid cleaner is the recommended cleaning liquid for the diamond knives 9000 rapid cleaner 250ml 9001 rapid cleaner 500ml 9002 rapid cleaner 1000ml cleaning sticks Amidia cleaning sticks to remove the particles from the blade 9014 1 set of cleaning sticks (5 pieces of styropor with razor blade) measuring gauge 600 measuring gauge type RK

600

1 1

1 0

0.5 0.5 0.5 0.5 0.5 .5 .5 .5 .5 .5

1 1 1 1 1

0.6

0.5

0.4

0.3

0.30 0.30

0 0

.4 .4

0 0

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 24 Diamond cutting instruments for microsurgery

Unitholder

unitholder Amidia unitholders are designed to hold the instruments for easy cleaning 9010 4.6 mm / 6 pcs. of pencil, titan bayonet, one step, 3 settings step and micrometer 9011 6.5 mm / 6 pcs. of retinal, seven step 9012 4.6 mm / 1 pc. of pencil, titan bayonet, one step, 3 settings step and micrometer 9013 6.5 mm / 1 pcs. of retinal, seven step

The unitholders are designed to position the knives into a ultrasound cleaner.

article no. article no. 9010/9011 9012/9013

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 25 Diamond cutting instruments for microsurgery

Directions for use

Preparation (cleaning, disinfecting and sterilization) of diamond knives from Amidia Ltd.

General basic principles The diamond knives must be cleaned, disinfected and sterilized beforehand every time they are used; this particularly applies also to first use after delivery since the diamond knives are delivered unsterilized (cleaning and disinfecting after removal of the trans- port protective packaging; sterilization after packing). Effective cleaning and disinfecting is an essential prerequisite for effective sterilization. Please always observe as part of your responsibility for the sterility of the diamond knives for the application that only adequate device and product-specific validated processes for the cleaning/disinfecting and sterilization should be used, that the devices used (disinfector, steriliser) are serviced and checked regularly, and the validated parameters for each cycle are observed. Please also observe the valid legal provisions in your country as well as the hygiene regulations of the medical practice or hospital. This particularly applies for the different regulations concerning effective prion deactivation. Cutters and tips are very sensitive to mechanical touching which is why one should absolutely avoid any situation during manipu- lation, particularly during cleaning and during safe storage, in which the diamond knives touch each other or come into contact with other hard materials. The traditionally used sieve or the bowl for random mounting are not at all suitable as eye instruments. The ideal container must be made out of a metal-tolerant material and be subdivided in such a way that it does not touch the diamond knives and that it does impact the sensitive blades and tips.

Cleaning and disinfecting Basics An automated process (a disinfector) should be used wherever possible for cleaning and disinfecting. A manual process should only be used if an automated process is unavailable because of its significantly lower effectiveness and reproducibility1. 1 Use of a manual cleaning and disinfecting process must be secured by means of an additional product and process-specific validation, which is the responsibility of the user.

Perform pre-treatment in both cases.

Pre-treatment Rough dirt and fouling must be removed from the diamond knives immediately after use (within a maximum of 2 hours).

Use flowing water to do this or a cleaning agent solution; the cleaning agent should be compatible with the diamond knives (see chapter “Resistance of the material to various substances“; we recommend our cleaner “Rapid Cleaner“ type No. 9000, 9001 and 9002). Clean the diamond knives and the blades using a soft, lint-free, damp cloth or by using the Amidia cleaning sticks Type No. 9014. Clean diamond blades with the cloth or cleaning sticks in the direction of cutting against the tip. In cases of strong fouling, we recommend hanging the diamond knives on the Amidia instrument stands type 9010, 9011, 9012 or 9013 and dipping the knives in Amidia Rapid Cleaner so as just to cover the fouling, to soften the dirt. The diamond knives should not be totally immersed since particles of dirt could get into the mechanism and negatively effect their function. You can also perform an additional disinfection to protect personnel; the disinfecting agent should be aldehyde-free (otherwise there will be fixing of blood spots), should have a checked effectiveness (e.g. a DG HM or FDA approval or CE marking), be suitable for disinfecting the diamond knives and be compatible with the diamond knives (see chapter “Resistance of the material to various substances“). Please note that this disinfection – after cleaning – can not replace the disinfection step to be performed.

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 26 Diamond cutting instruments for microsurgery

Automatic cleaning/disinfecting (disinfector/RDG) The following should be observed when selecting the disinfector, – that the disinfector always has a checked effectiveness (e.g. DG HM or FDA approval or a CE marking according to DIN EN ISO 15883), – that wherever possible a checked programme for thermal disinfection (min. of 10 minutes at 93°C or an A0 value > 3000) is used (for chemical disinfection a risk of disinfectant residues on the diamond knives), – that the programme used for the diamond knives is suitable and contains an adequate number of flushing cycles, – that only sterile or low germ content (a max. of 10 germs/ml) as well as a low endotoxine (max. of 0.25 endotoxine units/ml) of water (e.g. purified water/highly purified water) is used for rinsing, – that the air used for drying is filtered and – that the disinfector is regularly serviced.

The following should be observed when selecting the cleaning agent system, – that this is fundamentally suitable for cleaning of instruments made out of metals and plastics, – that – in as far as no thermal disinfection is used – that an additional suitable disinfectant with a checked effectiveness (e.g. a DG HM or FDA approval or a CE marking) is used and that this is compatible with the cleaning agent used and – that the chemicals used with the diamond knives are compatible (see chapter “Resistance of the material to various substances“).

The concentrations specified by the manufacturer of the cleaning agent and disinfectant, if needed, must be observed.

Procedure: 1. Lay the diamond knives in the disinfector. Ensure that the diamond knives do not touch each other. 2. Start the programme. 3. Remove the diamond knives after the disinfector programme has ended. 4. Check and pack away the diamond knives as soon as possible after removal (see chapter “Checking“, “Servicing“ and “Packing“, and also allow further drying if necessary at a clean location).

Checking Check the diamond knives after cleaning or cleaning/disinfecting for corrosion, damaged surfaces, splitting-off and fouling and separate out a damaged diamond knife (limit the number of times it is reused, see chapter “Reusability“). Diamond knives which are still dirty must again be cleaned and disinfected.

Servicing Do not use instrument oils wherever possible. If use is required, however, then one should ensure that only instrument oils (white oil) are used which are approved for steam sterilization and have a tested biocompatibility, while taking account of the maximum sterilization temperature used.

Packing Please pack the diamond knives in disposable sterilization packagings (simple or double packaging) and/or sterilization contai- ners which meet the following requirements: – are in accordance with DIN EN 868/AN SI AA MI ISO 11607 DIN EN ISO/AN SI AA MI ISO 11607) – are suitable for steam sterilization (temperature resistant up to a minimum of 141°C (286°F), adequate steam permeability) – there is adequate protection of the diamond knives or sterilization packagings against mechanical damage – regularly serviced according to the manufacturer’s instructions (sterilization container)

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 27 Diamond cutting instruments for microsurgery

Sterilization Only use the following sterilization processes for the sterilization; other sterilization processes are not permissible. Steam sterilization – a fractionated vacuum process2 (with adequate product drying) – a steam steriliser according to DIN EN 13060 or DIN EN 285 – validated in accordance with DIN EN 554/AN SI AA MI ISO 11134 (valid order picking and product-specific performance assessment) – Sterilization time (exposure time at the sterilization temperature) of a minimum of 20 min. (at 134°C (270°F)) or 5 min3 at 134°C (270°F)/134°C (273°F) 2 Use of the less effective gravitation process must be secured by additional product, steriliser and process specific validation which is the responsibility of the user (longer sterilization times may be required). 3 or 18 minutes (prion deactivation)

Also do not use any hot air sterilization, no radiation sterilization, No formaldehyde or ethyleNoxide sterilization, as well as no plasma sterilization.

Storage The diamond knives must be stored in the sterilization packaging after sterilization, dry and dust-free.

Resistance of the material to various substances Ensure, when selecting cleaning agents and disinfectants, that they do not contain the following components: – organic, mineral and oxidising acids (a maximum permissible pH value of 10.5, a neutral/enzymatic or weak alkaline cleaner is recommended) – strong sodium hydroxide solutions – organic solvents (alcohols, ethers, ketones, benzines) – oxidation agent (e.g. hydrogen peroxide) – halogens (chlorine, iodine, bromine) – aromatic/alkyl halides – salts of heavy metals

Never clean the diamond knives by using metal brushes or steel wool.

The diamond knives may only be subjected to temperatures below 141°C (286°F)!

Reusability The diamond knives can always be reused if they are handled with sufficient care and are undamaged and clean. Diamond knives with a defective or broken off blade must be reground or replaced. All liability is excluded in cases of violation of these instructions.

Manufacturer and Distributor Amidia Ltd. Mattenstrasse 11 CH-2555 Brügg

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 28 Diamond cutting instruments for microsurgery

Customer service

Most of our diamond blades can be We always do our best in order to return resharpened several times if they are not your repairs as soon as possible. too badly damaged. However, the lead time may be variable For each repair, the handle is totally due to the many different kind of blade dismantled, and all of the mechanical types we receive for resharpening. parts are cleaned, checked and replaced if necessary. Micrometer and step knives are recalibrated.

After regrinding, the diamond blade is as good as a new blade.

We accept other knives for repair except the micrometer knives. However, we can not accept responsability for the break- age of blades other than Amidia.

Amidia LTD Mattenstrasse 11 phone +41 32 333 24 74 mail [email protected] CH-2555 Brügg fax +41 32 333 24 76 web www.amidia.ch 29 Notes Notes For more information about our service, please contact your distributor or Amidia.

Amidia LTD Mattenstrasse 11 CH-2555 Brügg phone +41 32 333 24 74 fax +41 32 333 24 76 mail [email protected] web www.amidia.ch