NSW ICAC EXHIBIT E18-0281-AS-2-12-PR-0001 D10535104 !" # $% &' !" ( #)*+& ,*-.-/0-,12-*** 3& 34 3-1-* 5 6.+,,0789:( 3;3-.*+ 5 6<*=1. 789
! "
!"#$%&% $'()*$ + ,&- ) + -- ! " # # $ $ # # % & ' # # ( $ $' ) * $! $ #" +,-./0 ( +(01& 2 8 2 9.'2$#': # 2 # # 2
NSW ICAC EXHIBIT E18-0281-AS-2-12-PR-0001 D10535104
! " # # " " NSW ICAC EXHIBIT
E18-0281-AS-2-12-PR-0001 D10535104
INTERNATIONAL ROAD DYNAMICS INC. www.irdinc.com SAW Series III Portable Wheel Load Weighers FEATURES NEW Series III Features: • Low profile for easy access • Wheels to simplify maneuverability • Lightweight and easy to handle • Single NiMH battery pack • Rugged design for long service life • Battery status display bar • Corrosion resistant materials • Improved charge cycle (2 hours) • MANAGEMENT • Large backlit LCD • Charge control LED indicators • Ergonomic, flexible handle • IP 65 rated interface connectors • SAFETY • Anti-slide tapes • Faster AD converter for higher • PRESERVATION • Approved for weight enforcement output rate • Record and print wheel loads and • New Zero-Setting function axle loads (via RS 232) • Bluetooth® compatible International Road Dynamics • Either metric or U.S. version Inc. develops and maintains traffic management products and systems technology that make highways talk. What are they saying? They are providing information that roadway administrators need to manage traffic, preserve infrastructure and provide safety warnings to drivers.
SAW Series III (10C Model shown) IRD’s multi-discipline, innovative and APPLICATIONS AND BENEFITS customer-focused team is • Weighing trucks and transport vehicles in road transport, construction, expert in advanced agriculture, forestry and waste disposal technologies, advanced traffic • Weighing vehicles to avoid overload fines solutions and • Aviation weighing for aircraft weight and balance custom-designed systems. • For stability tests on special vehicles such as fork lift trucks, also for measurement of outrigger loads on access platforms and smaller cranes • EC Approved - OIML R 76, and CE certificates of conformity • NTEP Certified to NIST Handbook 44
OCTOBER 2015, REV C IRD products and components are protected by one or more worldwide patents and/or trademarks. PRINTED IN CANADA IRD reserves the right to change, modify, or improve its products at any time without notice. NSW ICAC EXHIBIT
E18-0281-AS-2-12-PR-0001 D10535104 SAW Series III Wheel Load Weighers Technical Data
SPECIFICATIONS Model SAW SAW SAW 10A/III 10C/III 15C/III Aluminum Aluminum Aluminum Capacity 10 t 10 t 15 t
Active 400 mm x 483 mm 560 mm x 483 mm 560 mm x 483 mm Weighing Surface (width x length in traffic direction) Dimensions 737 mm x 518 mm x 41 mm 858 mm x 518 mm x 39 mm 858 mm x 518 mm x 39 mm (width x length x height) Weight 15.6 kg 20.2 kg 20.2 kg
Digital Graduation Value 20 kg 50 kg 50 kg
Accuracy ±10 kg (up to 1 t) ±25 kg (up to 2.5 t) ±25 kg (up to 2.5 t) OIML ±20 kg (1 t to 4 t) ±50 kg (2.5 t to 10 t) ±50 kg (2.5 t to 10 t) ±30 kg (4 t to 10 t) ±75 kg (10 t to 15 t) Accuracy ±1% ±1% - NIST Handbook 44 ±50 lbs (from 0 to 2,500 lbs) ±50 lbs (from 0 to 2,500 lbs) - ±100 lbs (from 2,500 lbs to ±100 lbs (from 2,500 lbs to 10,000 lbs) 10,000 lbs) ±150 lbs (from 10,000 to ±150 lbs (from 10,000 to 20,000 lbs) 20,000 lbs) Certified -20 °C/+40 °C -20 °C/+40 °C -20 °C/+40 °C Temperature Range Interface/Connectors RS 232 RS 232 RS 232 Cannon bayonet IP65 Cannon bayonet IP65 Cannon bayonet IP65 Power Supply Battery pack Battery pack Battery pack NiMH battery pack 7.2V rechargeable 7.2V rechargeable 7.2V rechargeable – 10 hours/1000 weighings – 10 hours/1000 weighings – 10 hours/1000 weighings
ACCESSORIES AND OPTIONS
Connecting cable for Access ramps Charging cable Bluetooth module axle weighing
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Corporate Office U.S. Office
702 - 43rd Street East 2402 Spring Ridge Drive, Suite E Saskatoon, Saskatchewan Spring Grove, IL Canada S7K 3T9 USA 60081 Tel: +1(306) 653-6600 Tel: +1(815) 675-1430 15 Fax: +1(306) 242-5599 Fax: +1(815) 675-1530 20 1980− Toll Free: 1-877-444-4IRD (4473) Email: [email protected] Publicly Traded on the TSX (Symbol IRD) Find out more about IRD on our website: www.irdinc.com
IRD products and components are protected by one or more worldwide patents and/or trademarks. IRD reserves the right to change, modify, or improve its products at any time without notice. PRINTED IN CANADA NSW ICAC EXHIBIT
E18-0281-AS-2-12-PR-0001 D10535104
INTERNATIONAL ROAD DYNAMICS INC. www.irdinc.com SAW III Axle Scale System Portable Dynamic Weighing The popular, field proven, and very durable SAW wheel load scale is now available for dynamic weighing. With the SAW’s user-friendly software it is possible to efficiently pre-select overloaded trucks. Two SAW scales are paired and connected with a PC via Bluetooth®. The vehicle drives over the scales at slow speed and the weighing result (wheel/axle weights and gross vehicle weight) is displayed on the screen. For weight enforcement with the highest accuracy the system can be switched to static operation mode. • MANAGEMENT • SAFETY The system guarantees high vehicle throughput, especially when using two sets of SAW scales (one set in dynamic mode for pre-selection and one in static mode for • PRESERVATION weight enforcement).
International Road Dynamics Inc. develops and maintains traffic management products and systems technology that make highways talk. What are they saying? They are providing information that roadway administrators need to manage traffic, preserve infrastructure and provide safety warnings to drivers.
IRD’s multi-discipline, SAW III Advantages innovative and • Application of SAW scales for static and dynamic weighing operation customer-focused team is • Pre-selection of overloaded trucks • High vehicle throughput expert in advanced • High accuracy technologies, advanced traffic • Very efficient weight enforcement solutions and custom-designed systems.
FEB 2016, REV C IRD products and components are protected by one or more worldwide patents and/or trademarks. PRINTED IN CANADA IRD reserves the right to change, modify, or improve its products at any time without notice. NSW ICAC EXHIBIT
E18-0281-AS-2-12-PR-0001 D10535104 SAW III – Technical Data Features: Applications: • Low profile, lightweight • Dynamic measurement for overload indication • Rugged design, corrosion resistant • Dual-scale system configuration with computer based • Twin-tire weighing processing for reporting, protocol printing and data archiving • Flex frame for higher accuracy • Designed to meet OIML R134
More than 12,000 SAW units sold worldwide!
Model SAW SAW 10C/III 15C/III
Weighing Range 0 to 20,000 lbs 0 to 30,000 lbs (0 to 10,000 kg) (0 to 15,000 kg) Active 22” x 19” 22” x 19” Weighing Surface (560 mm x 483 mm) (560 mm x 483 mm) (width x length in traffic direction) Dimensions 33.8” x 20.4” x 1.5” 33.8” x 20.4” x 1.5” (length x width x height) (967 mm x 518 mm x 39 mm) (967 mm x 518 mm x 39 mm)
Weight 44.4 lbs (20.2 kgs) 44.4 lbs (20.2 kgs) Digital Graduation Value 50 lbs/50 kgs 50 lbs/50 kgs
Static Accuracy ±50 lbs (from 0 to 2,500 lbs) - NIST Handbook 44 ±100 lbs (from 2,500 to 10,000 lbs) ±150 lbs (from 10,000 to 20,000 lbs) Static Accuracy ±25 kg (up to 2.5 t) ±25 kg (up to 2.5 t) OIML R76 ±50 kg (2.5 to 10 t) ±50 kg (2.5 to 10 t) ±75 kg (10 to 15 t) Dynamic Accuracy ±3% or better (up to 10 km/h) ±3% or better (up to 10 km/h)
Operating -20 °C/+70 °C -20 °C/+70 °C Temperature Range (-4 °F/160 °F) (-4 °F/160 °F) Power Supply Battery pack Battery pack AA Batteries 1.5V 7.2V rechargeable 7.2V rechargeable Approx. 12 hours weighing Approx. 12 hours weighing
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Corporate Office U.S. Office
702 - 43rd Street East 2402 Spring Ridge Drive, Suite E Saskatoon, Saskatchewan Spring Grove, IL Canada S7K 3T9 USA 60081 Tel: +1(306) 653-6600 Tel: +1(815) 675-1430 15 Fax: +1(306) 242-5599 Fax: +1(815) 675-1530 20 1980− Toll Free: 1-877-444-4IRD (4473) Email: [email protected] Publicly Traded on the TSX (Symbol IRD) Find out more about IRD on our website: www.irdinc.com
IRD products and components are protected by one or more worldwide patents and/or trademarks. IRD reserves the right to change, modify, or improve its products at any time without notice. PRINTED IN CANADA NSW ICAC EXHIBIT E18-0281-AS-2-26-PR-0001 D10506897 !" #$ % &!' ( ( ) #$ * +,-)./-0-,/1-02-///
%) 6 7 30 8 33 9# ) :$(; )) # ,/)./-01,. + !" !" #$ !"#$ % &'' ( )) * + $ #( # , - ./010/02&131 ! #4, 5
!"#$%&% $'()*$ + ,&- ) + --
, "
6 ) # ) # % "* "* $ ( , * # # # * % % ) % # * ) # %
) 5 # * 6" ! 6 ) )
7 NSW ICAC EXHIBIT E18-0281-AS-2-26-PR-0001 D10506897
! 4, 8 $ ( 9':;13 " ") "7"9736< , = >%= ;!= ! ? = ")=
NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10549102 !"#$ % & ' () ( * +#, ( % & - './0.12314...562111
!" # $ %& ' ( )% *+ 2 3+ 4 !( ! * 5/%-&. 2 52. 1 + 6 896 :- 6 ; "6 6
! " # # " "
$< =>?6$< =>; @ A%) %/)056/'+ B ; CD 4 B ; C =E:++B+=E:; C " +" ! " #$ %#&! ' $ $ $ ( ! )! *+,' ! !! ! ! $ *+, !-! *+,.%&/+* ! ! $ !! 0 $ ' $$ $ *+, !* ! ! #! 1 $ 2 ! ! ) ' # $ $ ! $ ! #-! # 3 #' ! ' # ! ! ) $ !! ) ! ' , $ ! $ ' ! '
$4 3 , # 5, 6 / 5, !#$ 7889: ;8: ' ' '$'! #$ >>3 3%#7=
/ $
36 &%%6,*? ! ' $ '% $ $ 2 !' #$ ! ! ' 4 ( $ ! $ #$ ' ! $ ! ' @! ! ! ! ' NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10523467 ! " #$ # !%&'() # ! * %+,-+./0++1+223/... 4 5 # # & 4# # #4 " % 4 # 6 +1-+./0%7++'% !
!" # $ %& ' ( )% *+ 2 3+ 4 !( ! * 5/%-&. 2 52. 1 + 6 896 :- 6 ; "6 6
! " # # " "
$< =>?6$< =>; @ NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10523467
A%) %/)056/'+ B ; CD 4 B ; C =E:++B+=E:; C " +" ! " #$ %#&! ' $ $ $ ( ! )! *+,' ! !! ! ! $ *+, ! -! *+,.%&/+* ! ! $ !! 0 $ ' $$ $ *+, !* ! ! # ! 1 $ 2 ! ! ) ' # $ $ ! $ ! # -! # 3 #' ! ' # ! ! ) $ !! ) ! ' , $ ! $ ' ! ' $4 3 , # 5, 6 / 5, !#$ 7889: ;8: ' ' '$'! #$ >>3 3%#7=
/ $
36 &%%6,*? ! ' $ '% $ $ 2 !' #$ ! ! '4 ( $ ! $ #$ '!$ ! '@!! ! ! ' NSW ICAC EXHIBIT E18-0281-Ember-GS0005-00-00 R18/1437 ! "#$%#&'(#$'()&*'&&&+%, -
! "# $ % & ' ( $ ) ) % ( * " & !' + " , &- . /) # 0&1 ' $&2 '3 ( 4& 3 *&( 5 &3, % 6 # !+' % " &% 4 ' , ) 7 5 ) + 8
. / / / / , 0"#$%"#&'(% 1'2% ,3
NSW ICAC EXHIBIT E18-0281-Ember-GS0005-00-00 R18/1437
! "# $ " " % & "' ( ( ' ) ' '
) *+ )*& ,
- . / 0 /)*&1 0 ) , ) '2
3 2 4 5 6 / 0 ) ,
NSW ICAC EXHIBIT E18-0281-Ember-GS0005-00-00 R18/1437
7 *
* +
%8 ) 9
)*&/) * & ) 0
4:;$<6 7476 =
8 >
- ,>
$+ >
* + C
2 >
NSW ICAC EXHIBIT E18-0281-Ember-GS0005-00-00 R18/1437
>
NSW ICAC EXHIBIT E18-0281-Ember-GS0005-00-00 R18/1437
! " # # " "
D > C E - ' @=;:@A >;68+ * + F* + C G $8 4 " 5 5 5 6 50 05 7 NSW ICAC EXHIBIT E18-0281-Ember-GS0005-00-00 R18/1437
8 " ,
" , NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10495420
! " " #$ %&&' ( ! " " #$ %&&' ) )* $+ ,-%.%./ #0& 0"'%. %. -1 23 $ 2 , 4 5 41 5 4 $
' + $4 "' ) + $ 6 2 7 7 4 ' 2 8 0 9 0 + 0 0 2 4
: 6
; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
< %% 4474 4%%""= 0>?0 > ">" > 7
0 & @ $ + A/
! %% 4474 4%% 0& & 7 4 NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10495420
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;
NSW ICAC EXHIBIT E18-0281-AS-2-12-PR-0001 D10499236 ! "! # $ % "& '()$ (*+&$ , ! & ! - . / 0$/- 1 234*4354677+*83344
! " #$%&' ( ) * % + , $
! " # ! $ % ! & ' ' ' * % + , $
! ( ! ) ! * ') + , " # ! $ % ! & ' ' ' ! "#$ % &' & # # ( )*+,-. / / ) .01 $2 672 ,! 2 ! 8# # 2 # # / 2
NSW ICAC EXHIBIT E18-0281-AS-2-12-PR-0001 D10499236 ! " #
# " " 9 !:;< 2 9 !:;8 = 9# 4 +*>332*1$! ! ? ! 8# #@ 2$ # ,# ! - - " * % + , $
$ ' - # ! . * '!/!) ) .'0 ' '% ' '%* %1') # ! $ % ! & ' ' ' 2 % . / ) 0 - +1/-' 2 - + 3 4 &3 5 5 +1/-' 6.,78 9:;<49<:4:;4=>=<4 6 2*52 / + 28 ? 62/+9489 6 : &#?,52* 6.#8<9:9# 44<<48 44<<4= 6 *. 88 6+ ? . &@ 6 - &#?, , ! 1.1+" NSW ICAC EXHIBIT E18-0281-AS-2-12-PR-0001 D10499236
* % + , . A, $ B A, . <CC:=<9C= * . DD+ + 2.?4><
B
*+$/12/2$/,&E/ 2 * . % 3 * . F NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10548009 ! "# $ %&' ()&*)(+*,-.&&)) / 012&,3**4567 / 012&(,&456
! ! "# $ # % & ' $ ( #) #) *+,-./ $ $ 0*"/12 ' 3 73 8-%3# % 9 : 3 !3
! " # # " "
; < 3=9 ! > ? @*$,+@453+*'% # % A# % 9 B C # $ C $ ) ,+@4 ! ! ' # $ ) NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10548009
Location Name Scale ID Due date 2016 Scale Type Albury PAT133218 10-Dec-16 PAT Botany PAT132192 12-Nov-16 PAT Botany PAT132194 12-Nov-16 PAT Botany PAT132195 12-Nov-16 PAT Botany PAT132196 12-Nov-16 PAT Botany PAT132218 12-Nov-16 PAT Botany PAT132280 12-Nov-16 PAT Central Sydney PAT133642 04-Nov-16 PAT Central Sydney PAT133914 10-Dec-16 PAT Central Sydney PAT134222 10-Dec-16 PAT Central Sydney PAT134224 10-Dec-16 PAT Central Sydney PAT134225 10-Dec-16 PAT Central Sydney PAT134226 10-Dec-16 PAT Central Sydney PAT134227 10-Dec-16 PAT Grafton PAT132174 10-Dec-16 PAT Grafton PAT132250 10-Dec-16 PAT Grafton PAT132266 10-Dec-16 PAT Grafton PAT132319 10-Dec-16 PAT Grafton PAT132325 10-Dec-16 PAT Grafton PAT132326 10-Dec-16 PAT Kankool WB PAT133162 22-Oct-16 PAT Tamworth PAT133118 23-Nov-16 PAT Tamworth PAT133135 23-Nov-16 PAT Tamworth PAT133214 23-Nov-16 PAT Tamworth PAT133219 23-Nov-16 PAT Tamworth PAT133220 23-Nov-16 PAT Tamworth PAT133237 23-Nov-16 PAT Wagga Wagga PAT131584 22-Oct-16 PAT Wagga Wagga PAT131612 22-Oct-16 PAT Wagga Wagga PAT131654 22-Oct-16 PAT Wagga Wagga PAT131662 22-Oct-16 PAT Wagga Wagga PAT132108 22-Oct-16 PAT Wagga Wagga PAT133062 22-Oct-16 PAT Wagga Wagga PAT133218 10-Dec-16 PAT Wollongong PAT130670 02-Nov-16 PAT Wollongong PAT131372 02-Nov-16 PAT Wollongong PAT131412 02-Nov-16 PAT Wollongong PAT133074 02-Nov-16 PAT Wollongong PAT133085 02-Nov-16 PAT Wollongong PAT133608 12-Nov-16 PAT Wollongong PAT133612 12-Nov-16 PAT Wollongong PAT133633 12-Nov-16 PAT Wollongong PAT133654 12-Nov-16 PAT Wollongong PAT133684 02-Nov-16 PAT Wollongong PAT133764 02-Nov-16 PAT Wollongong PAT133786 02-Nov-16 PAT Wollongong PAT133880 02-Nov-16 PAT Wollongong PAT133881 04-Nov-16 PAT Wollongong PAT133969 12-Nov-16 PAT NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10548009
Wollongong PAT133971 12-Nov-16 PAT Wollongong PAT133975 02-Nov-16 PAT Wollongong PAT134212 02-Nov-16 PAT NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10548009
Location Name Scale ID Due date 2016 Scale Type Armidale PAT131980 15-Sep-16 PAT Armidale PAT132074 15-Sep-16 PAT Armidale PAT132085 15-Sep-16 PAT Armidale PAT132095 15-Sep-16 PAT Armidale PAT133182 15-Sep-16 PAT Armidale PAT133194 15-Sep-16 PAT Kankool WB PAT132081 06-Oct-16 PAT Kankool WB PAT132082 06-Oct-16 PAT Kankool WB PAT133204 06-Oct-16 PAT Kankool WB PAT133210 06-Oct-16 PAT Kankool WB PAT135230 06-Oct-16 PAT Kempsey PAT132198 06-Oct-16 PAT Kempsey PAT132217 06-Oct-16 PAT Kempsey PAT132226 06-Oct-16 PAT Kempsey PAT132320 06-Oct-16 PAT Kempsey PAT132323 06-Oct-16 PAT Kempsey PAT132324 06-Oct-16 PAT Parkes PAT131338 17-Sep-16 PAT Parkes PAT131339 17-Sep-16 PAT Parkes PAT131341 17-Sep-16 PAT Parkes PAT131346 17-Sep-16 PAT Parkes PAT131353 17-Sep-16 PAT Parkes PAT131370 17-Sep-16 PAT Wagga Wagga PAT134739 17-Aug-16 PAT Wollongong / Marulan HVIS PAT133928 17-Sep-16 PAT Wollongong / Marulan HVIS PAT133938 17-Sep-16 PAT Wollongong / Marulan HVIS PAT133939 17-Sep-16 PAT Wollongong / Marulan HVIS PAT133940 17-Sep-16 PAT Wollongong / Marulan HVIS PAT133941 17-Sep-16 PAT Wollongong / Marulan HVIS PAT133942 17-Sep-16 PAT NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10548009 NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10489440
!" # $ % !" # $ & '()" *+# , # , -& & ! . $#, #, +/ NSW ICAC EXHIBIT E18-0281-AS-2-12-PR-0001 D10499267 ! "#$ % #&' ( ) * +,# -,. - )/0 - . - ) 1 * /23!&3242&543672233
!" #$ % # &'(') *
+, - $ . /$ 0 1 /$ ! . )(2234)524 ! + . 88-- .9('7) NSW ICAC EXHIBIT ! "#" "$
%& ' ( & ) * * ) ) + &, ) - ' & .& ( . ,
, ) &/ 0 )
,12-34 , 5 , ,12-34 6 7 ! "88# 4349 : *5 ) * 6 . 5. 7 6 ,7; ,7; % %
/ 7 ' (- * ) 7 + &7
. , , ) &/ 1 ! < 43 : *5) * 6
! " # !" #"$ #"$%" &!'( )* .* / *0 1 23*444 $%%&!'$%%('$%%)!' NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10548011 ! " #$% & $'(!) * ! ! ) !+ , ! ) ! -) . - + / 0 123 "'42324'5'462244
!
! "#$%!" &' " #$ % ! && ' !(" ! () * "#$%!" +&' ) * + , ! * $ ! ' - ( . # !% /01&23+ '/'345 ( 6 *"6 <&6 ! = ! 6 ! ! + 6
! " # # " " >?@$ A 6 !>?@$= ! !! B $ 8210892625( C ! = ! D * 6E " 4 , , F ! " :0 ! ( . 6
>?@$ C !>?@$= ! !! D 8:$ 10895633621@@< 4 * G,C !,= ! D C = ! D
( " , F !4 ! NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10548011
( > 8:$1089;61:@* G,C !,= ! D 6
) F + ! ! + # H% I !4 + !J ! ! ! !" #$%&'()*)+*)+!)#,(-. / 3/ 4& /5!6 ! 78/999! ! C 008!IDC 001!DC 003!ID ! " # # " "
:5 *
-;<-<- 4/- 8 8 ! 5 5 !< 5 9 8 + ! ) 85 ! 93 5 * 95 ) ! 5 * 5 5 != * 5 5 ! NSW ICAC EXHIBIT E18-0281-AS-2-12-PR-0001 D10499242 ! " #$% & $'(!) * ! ! ) !+ , ! ) ! -) . - + / , 012 "'31435'2'671133
! " " #$% & '%()*+ ,- , . "/ 0 1
!" # $%&'#$ ()* !"# $ %& # ' ( ) *+ , - ! ! " . / !)0 !) 1 2+3&45 6 - 2-5(* 7 =>7 &"7! " ? 7 67
! " # # " " NSW ICAC EXHIBIT E18-0281-AS-2-12-PR-0001 D10499242 $ "@'A7 $ "@'? B ( ' 9; 3+9:;73* " ! " C! " ? D !7E F F , !"!), F F " , . "/ 0 1
+ ! !, # $%&'#$ )* > 0' 1 && - ! ! " > - !!! $%&'#$ ()* = 6 G = ' - ! ! " . / !)0 !) 1 2+3&45 6 - 2-5(* 7 =>7 &"7! " ? 7 67
NSW ICAC EXHIBIT E18-0281-AS-2-12-PR-0001 D10499242 ! " #
# " " $ "@'A7 $ "@'? B " ' 94 3+9:474* " ! " C! " ? D =7E ! > ,( G G H >;+ , / 7
$ "@'C $ "@'? D 9;' 3+9:*755743@"@)( = IGC G? D C ? D
>, G H ( $ 9;' 3+9: <73;@" = IGC G? D7
H6 6 0 #1 J ( 6 K 2 - 3 0 . NSW ICAC EXHIBIT E18-0281-AS-2-12-PR-0001 D10499242
4# 4" * )%'56$7 7 8 7 8 7)9$:; 0 < 2 ?< 5. < 3 @ !< C++9 JDC++3 DC++5 JD ! " # # "
"
A
.01::1: <: " " ! !" " " " !" " 8 " . 7 ! " /? " . 7 " " " " " + " " "
A
.01::1: <: " " ! !" " " " !" " 8 " . 7 ! " /? " . 7 " " " " " + " " " NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10549085 !" # $ $%&' #&()*(+,)()-))((
! " #$%&$'( ) * + , % +- . ) % +/ + / ($&01# %%*%(*#2 ) 3 8 3 90-3+- : ; 3 ! 3
! " # # " " <=-> ?3 <=-> : , @ % &&%&$'5136')- +- A+- : B + 3/+>8!! >!, ! % C ! " #$&$'( ! , ! ! , ! >! !! ! ! ! , ,+-% C ! - % <&# &$'5%&3'#>-%+- A+- : B 3
D % " , ! ! ! ! NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10549085 * + , % +- . ) % +/ + / ($&01# %%*%(*#2 ) 3 8 3 90-3+- : ; 3 ! 3 ! " # # " " +- - % &'%&$'51365)- C<=-> CA <=-> : , B /+>8!! D % > %! !! ! > ) < ,% ! A, $$6!,B * + , % +- . ) % +/ + / ($&01# %%*%(*#2 ) 3 8 3 90-3+- : ; 3 ! 3 NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10549085
! " # # " "
!"! # # $ ! % "# & ! " " #'$( " $ &# " " #)"" " " # NSW ICAC EXHIBIT E18-0281-AS-2-12-PR-0001 D10498489 !"#$%"% %&# ' ( )$%* ! +, '$- . " %'%" " -%" / 0 % !-! % !1-! 2%$%" 1 /3""$ 45 ""$ 1#52%$%" 1 / " & % ""#%"%"#2*%#' "$1 6 "3+6 +789,:;
! "#$ %&
! "#$%&'" ( ) * + , ,,- .%%% / 0 1 '%( ) *+ % %% & $ , %+ %+%, % % %%+%+ -% %+ % ** ,%%%, % ( ,% -% %+% &)%% %& % % ( , % % %+ %& % % +%, %% ,% % % + , + % %,% %% %%+% , -% & %, ,% / % ,% % % )$% % 0 % % ,%% %% % ,% %, % -% & %% %+ % % % %+/ % %&& - % % ,% + - $%0% - % & )(& 1%2+ 2%3 ( %,%&4- +% & "#$%&'" 23 4 4 ( ) * + , ,,- 5 .%%% / 0 1 ! "# $$$ $ % &$ ' ()*# +,- . / ("## 0+1 . /% 2 "#$$$ ! ! "#$$$ 3 ! $ .$ 4 /& NSW ICAC EXHIBIT E18-0281-AS-2-12-PR-0001 D10498489
"/ "#$$$5 "#$$$%$ $ +,-"# $$$%6 %6 $ ! 7 (**#. 8 0 89 /% 3/ (*##"#$$$7 : % 460 ! %$ "#$$$ %6 $ ! 7 (**#. 8 0 89 /
"#$%&'" 4& ( ) * + , ,,- .%%% / 0 1 6, $ "#$$$ ! ! ; $ "#$$$ . /% ; $1 ! ; 7 < = < 7 #3>>:?#@>? %% % % 7 AA +723"*#
= $60+6+6$4&6 ! ! %$ %+ ! % 7 ! % 7 %$ %- % NSW ICAC EXHIBIT !"#$ % #&' ! () ! ( * + , - # . - / .*0 ( . ( / .* 1 /% ! . 2 0345 &36763886496633
! " # $ % & ' ! ( )& $ *
!" #$%&"!'# ( )*"* +,) ! " ! #$ " %&& !' & & ! ( & ) ( * & + + , & ( #- # . /0123 ! ! $ /43'5 & 6 :6 ;(6 ,< = 6
NSW ICAC EXHIBIT RE: 10C III software? From: SOLIMAN Samer <"/o=rta/ou=exchange administrative group (fydibohf23spdlt)/cn=recipients/cn=solimans"> ToTo:: Rish Malhotra
Thanks for the ETA Rish. im excited to see the dynamic scales in use. Can you pls work with Novation so novation can provide me a quotation for 2 x 10C III scales(with dynamic pack) asap please?
Samer Soliman Manager Heavy Vehicle Programs Compliance Operations
From: Rish Malhotra [mailto:[email protected]] Sent: Saturday, 7 January 2017 8:57 AM To: SOLIMAN Samer; Fernando Garza Cc: [email protected] Subject: RE: 10C III software? Hi Samer and Steve, Wishes for a very happy and healthy new year to you and your family! As a follow up to my previous email from December (below), I wanted to provide you with an update on the availability of our SAW III dynamic system. While we continue to supply the SAW III scales (for static deployment) worldwide, we anticipate that the SAW III dynamic system will now we ready on March 1, 2017. This is approx. 8 weeks from today and also includes the readiness of the commercial version of the software which we had discussed previously. I trust that this lead time and availability meets your expectations. Attached in this email is a description of the SAW III system functionality for static weighing as well as dynamic weighing that will be available. I recommend that Novation procures a unit in advance so that it is available for use with the upcoming release of the dynamic software. This will provide Steve’s team with hands on exposure and experience in using the dynamic system in advance of the formal training program that we have discussed. As always, please do not hesitate to call if you have any questions. Look forward to a mutually successful 2017!! Kind Regards, Rish Malhotra Vice President, International Business IRD (International Road Dynamics Inc.) 702-43rd Street, Saskatoon, SK, S7K 3T9 Canada Phone: Fax: E-Mail: [email protected] Web: www.irdinc.com Skype:
ü Please consider the environment before printing this email. IRD is Customer Driven! This E-mail message (including attachments, if any) is intended for the use of the individual or entity to which it is addressed and may contain information that is privileged, proprietary, confidential and exempt from disclosure. If you are not the intended recipient, you are notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender and erase this E-mail message immediately. From: Rish Malhotra Sent: Thursday, December 8, 2016 8:31 PM To: SOLIMAN Samer
Rish Malhotra Sent from my mobile device. Please excuse any typographical errors. From: SOLIMAN Samer Sent: Thursday, December 8, 2016 18:03 To: Rish Malhotra; Fernando Garza Cc: [email protected] Subject: RE: 10C III software?
Hi Rish, Fernando had a long phone call with me to explain the situation to me with the dynamic weighing software and also the lack of availability of the 10C series I and II, which I was not previously aware of.
Issue 1: 10C I and II availability : I put in a funding request for procurement of approximately ~450 static ONLY svales( 10C I and 10C II ), and approximately ~100 static AND dynamic scales( 10C III ). With the 10CIII price being substantially higher than the 10C I and II, can you consider 2 options below so I can still procure the same amount of scales(as I can not ask for MORE funding now): 1) provide the 10C III's at the same price as the 10C I or II. If this is done, I will procure ONLY 10C III. This is the preferred option. To support you, I can submit a formal RMS letter stating that we intend to procure ~550 scales(when funding is approved - expected next April-June). 2) manufacture ~500 10C I or II so RMS can procure over the next 3 years.
Issue 2: Dynamic software availability: Fernando said he will provide me with an ETA for the dynamic weighing software availability. I can not procure 10C III scales that do not have software ready and tested. To support you, I can submit a formal RMS letter stating that we intend to procure ~550 scales(when funding is approved - expected next April-June)
Samer Soliman Manager Heavy Vehicle Programs Compliance Operations
From: SOLIMAN Samer Sent: Friday, 9 December 2016 10:08 AM To: Rish Malhotra; Fernando Garza Cc: [email protected] Subject: 10C III software? Importance: High Hi Risk, Fernando,
I received an update from novation today that the 10CIII scales have no software available to enable them to utilise the dynamic functionality? Ive made several promises to state managers that we have commenced orders of the 10CIII, only to find out now, that in fact, the units are not ready for procurement(as a dynamic scale). can you pls advise whats going on? what is this software used for etc and why it isnt ready for a product IRD have been marketing for a very long time?
Samer Soliman Manager Heavy Vehicle Programs Compliance Systems | Compliance Operations Branch | Compliance and Regulatory Services T 02 88370687 | M www.rms.nsw.gov.au Roads and Maritime Services 99 Phillip st Parramatta NSW 2150
Before printing, please consider the environment
IMPORTANT NOTICE: This email and any attachment to it are intended only to be read or used by the named addressee. It is confidential and may contain legally privileged information. No confidentiality or privilege is waived or lost by any mistaken transmission to you. Roads and Maritime Services is not responsible for any unauthorised alterations to this email or attachment to it. Views expressed in this message are those of the individual sender, and are not necessarily the views of Roads and Maritime Services. If you receive this email in error, please immediately delete it from your system and notify the sender. You must not disclose, copy or use any part of this email if you are not the intended recipient.
NSW ICAC EXHIBIT E18-0281-AS-2-12-PR-0001 D10499282 ! "#$ % #&' () ( * + ,-# . -/ . * 0 1! 0 ! . / . *2 ( . ( / . * 1 + 2'3&34536'33784433
! " !" #$% &'() %*& +,-./ 0 # $ %&
'( )& * *% * & %% +( )! , + - & * '! .% / % 0 ) "
!"#$%&'&('&( )& *%+, - 1- 2# -3 4 56-777
NSW ICAC EXHIBIT E18-0281-AS-2-12-PR-0001 D10499282
NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10487868 ! !" ! !#$%&!' "' !' "' '%&() * +(,-(,.+./0,((( ' ! +(,-(.(1(21((2+-+* 342/1567
!"#$ % %& '$() * + /+ 0" +1 2 34+555
& 6 7 (* 0" * 1 1 * 1* 6 5* * 1 * 86 8 8 1 /81 1 * 8 1* 4 8 1* 8 *41 *6 6* 8 1 * * 0"
"""""9 """"" +9:;<= +9:;<2 5 6> +( ;8 #! . ?+.$ ( + * * @ * * 2 AB @1 2 A 4C + 1 * 8 *64 *4 5 ; 1 1 8 1 5 6* /$ 1 4& 8 8 6 6 1 ** 1 1 1 1 1 *
8 1 * * % * * /!#* D 1 * * &* E1 8 8 * 6 9(;<(<9(&0+(* * 4 4 * 1 86 1 < 1 86 56 4 % 6 8 4 1 * * * F5 /8 * * 1* 6 *65 1 6 1 6* 8 1 1 * G 8 8 1* 1 * 8 NSW ICAC EXHIBIT
E18-0281-AS-2-1-PR-0001 D10487868
INTERNATIONAL ROAD DYNAMICS INC. INTELLIGENT TRANSPORTATION SYSTEMS
April 5, 2017 Saskatoon, SK
Re: Current SAW models
To Whom It May Concern:
This letter is to confirm that International Road Dynamics’ Static Axle Weighers (SAW) Series
III are the most current models offered by our company and the only ones under production.
The SAW Series III are the continuation of our SAW Series I and II, which have reached end-of-
Life as certain components are difficult or impossible to obtain, and for such reason, they are no
longer being manufactured.
If further clarification is required, I can be contacted directly at + 1 (306) 653-6600.
Sincerely,
Rernando Garza Product Sales Manager Internationa! Road Dynamics Inc.
lSV9001 -CUSTOMER -DRIVEN- 702 • 43'd Street East, Saskatoon, Saskatchewan CANADA S7K3T9 Telephone: (306) Facsimile: (306)242-5599 US IRD Corp: Spring Grove, iilinois Telephone: 1-877-444-41RD (4473) Facsimile: (306) 242-5599 www.irdinc.com NSW ICAC EXHIBIT !" # $ #%&'(#)&*+&,&))-.*&&&
!" ! #$ $% &' ( $)* $ ) !+ ,-./01 # ,#1"23 ' 4 :4 /%4$!% ;! 4 !! 4
! " # # " " !" #$% & ' ()$ $*+ ',- $&% ./ %* $ * 0'))1,', $)1)),'+'&% .& )1%)1/) '.)2 , 23%4%+ $' ..#+ ()$ +( !+'&% ./% +1( 1))2 %( 5 )( #&. 1 )& )1%)12 %( ,$#1') *').& )1%)1**..) )1& )1%,)1 +& /- $2 '.'/. . #&)+%))/),).)/. 1 #)$% .. 1)16) $ 7*89: 467;7 * ;: <; 6 , #?& )1%/$# . $)$.2$2' NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10547415 ! " "# $ % & '(() "(*+( (, ((-*** & " ! $ "."""/ 012345 NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10547415
"
, - ). %"/0( 1" (
/( 8 &( 2
3 . , ( 3 #$%' ( ( 3 ) /( " )% %" ( 4 )5 /( 3 . )6 ( "3 ( ( ( 7 / (5 /( % )6 ( ( ( ( 7 ( ", 9 . ( 0 /%( )% %" 5 /( 6 % )6 ( ( " ( ( 7 #$%&' % %( ) *! + % % /( 8' 3
%. $ ' ,: %/ ( ( ( 7
%"(
% "
; <" (1" ( - : NSW ICAC EXHIBIT E18-0281-AS-2-12-PR-0001 D10506268 !" # "$%& " '%()(%**(&+(%%% , - . " . +/(01(*%)'/%- " (% - " 22 22 3 4" 5 " 6 77 8 $ 2 - .!4 9" --3 3
77777777 77777777 !" #&:&:()%;1%<=+(%%%> ".5 ! ! " # $
! " ! &&&''&' ' (( ) * $%
+ , -./0)/)./-12/ 33 '- + + ')+ & 3 4 ' 3+ ' &5 + , &+ '-+ , + + '6 , + + ' NSW ICAC EXHIBIT E18-0281-AS-2-26-PR-0001 D10506606
! " # ! " $ !$%&'! () * * + , -.- / " * *)0 1 !$%&'! ( 23 242,2 0 & ( 2 3 20 , , (, 3. 20 NSW ICAC EXHIBIT E18-0281-Ember-GS0005-00-00 R18/1385 ! "# !" #$% &#### ' "# !#( ! % ")$*!( + *%,"-./
0 1' .''
203 14 '3 1' '5
6 12 7 68 +6 18 4 '6 / !#"9,)0 0'- 0'-: 0!;)* 2 < =97 1 >333 21' ' ' 1 68 ': ' ? '=9 1 ''+ 1 ' 4/ ' ' 1 4 3 ''' 4 ' 1 4 1 < '1' 64 4 4 '' ' 4 ' '' 14 64 ' 1' 4 ' ' '=9 1 '' 14 NSW ICAC EXHIBIT
E18-0281-Ember-GS0005-00-00 R18/1385
INTERNATIONAL ROAD DYNAMICS INC. INTELLIGENT TRANSPORTATION SYSTEMS
August 16, 2017 Saskatoon, SK
Letter of Appointment
International Road Dynamics Inc. (IRD), with Headquarters located at: 702-43rd St E, Saskatoon, SK, Canada S7K 3T9, do hereby appoint Novation Engineering Pty Ltd located at Sydney Hills, NSW, 2768, Australia as our Exclusive Distributor of Static Axle Weighers (SAW) equipment and accessories for the state of New South Wales in Australia.
IRD hereby commits to extend its full support and warranty to the Novation Engineering and in turn Novation Engineering commits to market and sell IRD’s SAW equipment exclusively and diligently, thereby not representing or marketing or selling any other static axle weigher product(s) during the validity of this appointment. This appointment is limited to the State of New South Wales in Australia and expires March 1st, 2018. Upon expiry, this agreement can be renewed upon mutual consent between IRD and Novation Engineering
Sincerely:
Rish Malhotra Vice-President, International Business International Road Dynamics Inc.
Ipl "CUSTOMER maooys -DRIVEN'
702 - 43,d Street East, Saskatoon, Saskatchewan CANADA S7K3T9 Telephone: (306) Facsimile: (306)242-5599 US IRD Corp: Spring Grove, Illinois Telephone: 1-877-444-4IRD (4473) Facsimile: (306) 242-5599 www.irdinc.com NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10487839 !"# $%&#'(%)(&*+,&-%((( .# !/0" 1',**23456 .# !/077 1',8()345
!"#!$ % & ' ( ( )% * (+ ( , -#"./0 '-'0 1 % 2 672 8. 2( 9 :;2 2
! " # # " " NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10487839 ! " # ! $ %& ' & ! ( )* +,)- ,*+./. 0),,, 1 ' ## # ' 2+). )- 345
! ! ! " # $ % $ &$ $ ' ()*+,- " ("- ./ 0 670 8+ 0 9 0 !0
! " # # " " NSW ICAC EXHIBIT
E18-0281-AS-2-1-PR-0001 D10487839
( INTERNATIONAL ROAD DYNAMICS INC. INTELLIGENT TRANSPORTATION SYSTEMS
August 16, 2017 Saskatoon, SK
Letter of Appointment
International Road Dynamics Inc. (IRD), with Headquarters located at: 702-43rd St E, Saskatoon, SK, Canada S7K 3T9, do hereby appoint Novation Engineering Pty Ltd located at Sydney Hills, NSW, 2768, Australia as our Exclusive Distributor of Static Axle Weighers (SAW) equipment and accessories for the state of New South Wales in Australia.
IRD hereby commits to extend its full support and warranty to the Novation Engineering and in turn Novation Engineering commits to market and sell IRD’s SAW equipment exclusively and diligently, thereby not representing or marketing or selling any other static axle weigher product(s) during the validity of this appointment. This appointment is limited to the State of New South Wales in Australia and expires March 1st, 2018. Upon expiry, this agreement can be renewed upon mutual consent between IRD and Novation Engineering
Sincerely;
\f|
Rish Malhotra Vice-President, International Business m2 International Road Dynamics Inc.
< if iso voV 9001 Jerl -CUSTOMER -DRIVEN'
702 - 43'd Street East, Saskatoon, Saskatchewan CANADA S7K3T9 Telephone: (306) Facsimile: (306)242-5599 US IRD Corp: Spring Grove, Illinois Telephone: 1-877-444-4IRD (4473) Facsimile: (306) 242-5599 www.irdinc.com NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10487839 ! " # $ %& & ' () *+(, +)***) -(+++ . / ## " 0*(, 12 3$4
! " # "$ "" " % & ! # ! '! ! ( )*+,-. % )%. / 0 6 0 7, 0 8 0 "0
! " # # " " NSW ICAC EXHIBIT
E18-0281-AS-2-1-PR-0001 D10487839
INTERNATIONAL ROAD DYNAMICS INC. INTELLIGENT TRANSPORTATION SYSTEMS
August 17, 2017 Saskatoon, SK
Letter of Appointment
International Road Dynamics Inc. (IRD), with Headquarters located at: 702-43rd St E, Saskatoon, SK, Canada S7K 3T9, do hereby appoint CIC Electrical Services located at 16 Kingston Close West Pennant Hills, NSW, 2750, Australia as our Exclusive Distributor of permanent Weigh in Motion (WIM) systems and related equipment for the state of New South Wales in Australia.
IRD hereby commits to extend its full support and standard warranty to CIC Electrical Services and in turn CIC Electrical Services commits to market, sell and maintain and service IRD's permanent WIM systems exclusively and diligently, thereby not representing or marketing or selling or servicing any other WIM product(s) during the validity of this appointment.
This appointment is limited to the state of New South Wales in Australia and expires March 1st, 2018. Upon expiry, this agreement can be renewed upon mutual consent between IRD and CIC Electrical Services.
Sincerely;
Rish Malhotra Vice-President, International Business International Road Dynamics Inc.
voV 9001 Ay -CUSTOMER DRIVEftT
702 - 43,d Street East, Saskatoon, Saskatchewan CANADA S7K 3T9 Telephone: (306) Facsimile: (306) 242-5599 US IRD Corp: Spring Grove, Illinois Telephone: 1-877-444-4IRD (4473) Facsimile: (306) 242-5599 www.irdinc.com NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10490943 !" ! ! !# $ $ % ! !" &! ' ! !" #()*!+,(),-(.+)/((,,
0 1$# 2% $ $$$%% % $ %3' !%$ 34 $33 5 $ 3$$ $$ $% 34 $43 %$ ! ! ' %$ $3$$ %'3 4633 $% $$ $ 7 %4 ' %' ! ' 89 3: $$ $ $ %$;$3 ( <$$ $ $$ + <$'3 $$ 3 3$ $.4!$4$ = $ 3! % $3 4! % $% $ $$ $ ! $ ' > 4 $%! $ $ 43$ $3%% $ 4!# 3 $#3 %$ >9 $# ! $ 43$ $3$ 4% $$$ $ 8! $ !$' %$ ' $ !!$$ $# $$ ' %% $ $$3$%$4 ! $ $ ! !6$ 7 %' 4 4 3 $4$ %! ! $ $ $ 5 ' < % $' 4 $$$ %$ $! 4 ? !$ !# @ ? ! 89 @4 4< $ % NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10490943
File Type: Microsoft Outlook Note
GUID: f4488b7d-6a16-49a7-9623-b6ef2eaec6d7
Item Date: Tuesday, October 17, 2017 at 9:13:27 AM Australian Eastern Daylight Time
MD5 Digest: cfbaa63275b413bd00257fdf01bd41e7
Path Name: /E18-0281-AS-2-1-PR-0001/E18-0281-AS-2-1-PR-0001.ad1/Schedule Item 1/SS_2017Nov.pst/Top of Personal Folders/SS/SS_2017Nov/Deleted Items
Shannon Entropy: 4.492930387565471
Property Source: E18-0281-AS-2-1-PR-0001
Cc: Fernando Garza
Content-Type: multipart/alternative; boundary="----=_Part_2172991_1600460460.1508192007061"
Date: Tuesday, October 17, 2017 at 9:13:27 AM Australian Eastern Daylight Time
File Created: Thursday, February 15, 2018 at 9:00:48 AM Australian Eastern Daylight Time
File Modified: Thursday, February 15, 2018 at 9:00:48 AM Australian Eastern Daylight Time
From: novationengineering novationengineering
In-Reply-To: <[email protected]>
Mapi-Attr-Hidden: false
Mapi-Attr-Readonly: false
PROTECTED NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10490943
Mapi-Attr-System: false
Mapi-Client-Submit-Time: Tuesday, October 17, 2017 at 9:13:27 AM Australian Eastern Daylight Time
Mapi-Conversation-Index: 01D346CC035A64780B64DE4E4D589EDAA65D0EBF0F5A
Mapi-Conversation-Topic: Thank You-Fernando Garza-(IRD)
Mapi-Creator-Name: Tape Restore2
Mapi-Display-Cc: Fernando Garza
Mapi-Display-To: [email protected]; rish
Mapi-e2f: 1,365
Mapi-EntryID: 0000000088fd5cfeae067f4f9fb792e84c574bf9e4552200
Mapi-Importance: 1
Mapi-In-Reply-To: <[email protected]>
Mapi-Internet-Article-Number: 1,365
Mapi-Internet-Cpid: 65,001
Mapi-Internet-References: <264410e9cd3c4f17a3d004f5e62c79db@Exch-2013- 1.irdinc.com> <[email protected]> <[email protected]>
Mapi-Last-Modifier-Name: Tape Restore2
Mapi-Message-Cc-Me: false
PROTECTED
NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10490943
Mapi-Message-Class: IPM.Note
Mapi-Message-Codepage: 1,252
Mapi-Message-Delivery-Time: Tuesday, October 17, 2017 at 9:13:36 AM Australian Eastern Daylight Time
Mapi-Message-Flags: 0x1 (read)
Mapi-Message-Locale-Id: 1,033
Mapi-Message-Recip-Me: false
Mapi-Message-Size: 26,635
Mapi-Message-To-Me: false
Mapi-Normalized-Subject: Thank You-Fernando Garza-(IRD)
Mapi-Rcvd-By-Flags: 0
Mapi-Rcvd-Representing-Addrtype: EX
Mapi-Rcvd-Representing-Email-Address: /O=RTA/OU=EXCHANGE ADMINISTRATIVE GROUP (FYDIBOHF23SPDLT)/CN=RECIPIENTS/CN=SOLIMANS
Mapi-Rcvd-Representing-Flags: 0
Mapi-Rcvd-Representing-Name: SOLIMAN Samer
Mapi-Received-By-Addrtype: EX
Mapi-Received-By-Email-Address: /O=RTA/OU=EXCHANGE ADMINISTRATIVE GROUP (FYDIBOHF23SPDLT)/CN=RECIPIENTS/CN=SOLIMANS
PROTECTED
NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10490943
Mapi-Received-By-Name: SOLIMAN Samer
Mapi-Search-Key: 96209628F53D63479F7AB98EC1A3A171
Mapi-Sender-Addrtype: SMTP
Mapi-Sender-Email-Address: [email protected]
Mapi-Sender-Flags: 65,536
Mapi-Sender-Name: novationengineering novationengineering
Mapi-Sensitivity: 0
Mapi-Sent-Representing-Addrtype: SMTP
Mapi-Sent-Representing-Email-Address: [email protected]
Mapi-Sent-Representing-Flags: 65,536
Mapi-Sent-Representing-Name: novationengineering novationengineering
Mapi-Smtp-Message-Id: <[email protected]>
Mapi-Subject: Thank You-Fernando Garza-(IRD)
Mapi-Subject-Prefix:
Mapi-Trust-Sender: 1
Mapi-Url-Comp-Name: Thank You-Fernando Garza-(IRD).EML
Mapi-Url-Comp-Name-Set: true
PROTECTED
NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10490943
Mapi-user-agent: OWM Mail 3
Mapi-User-Entry-Id:
Hi Dave/Rish,
Please pass this on to all relevant groups.
I have been dealing with IRD for close to two years now and we've had some good wins and some issues along the way. It happens in any working relationship but the true character of a relati
Mapi-x-auditid: a3bdcf04-f79306d000000f68-11-59e52f0cab66
Mapi-x-brightmail-tracker: H4sIAAAAAAAAA+NgFmpjleJIrShJLcpLzFFi42I5rSbKo8ut/zT S4PpBC4tNB1+zODB67 OlcwRjAGMWamZeUX5HAmrF8/jSmgskqFfsXHWRsYNwg38XIxSEk8IdR YtaEhUxdjJ wcEgJCEj3rfzKCJCQE/rNLzHk9nQmiqoNRYur2DewgVUICCRK/llwD6xARsJLYc fAEm M0soCcxZccdsBpeAVuJP8evMIPYnAJuEpvv3WaEGLSVUeLL7OlgCWEBdYlTdw4yQjQ ISp yc+YQFYlCsxJrzk8FqRAXEJLo/bGSDOI9TYvKT/VC2kkT/l71gNWwC/hL7fzeDxVk EdCSev9n IOIFRaBaSsbOQjIWwzSS6tnYxQtjaEssWvoaKq0nc3naVHVl8ASPbKkb14tSist QiXTO9pKLM 9IyS3MTMHF1DAwu93NTi4sT01JzEpGK95PzcTYzA2GAAgh2Mn/qdDz FKcjApifI6Gz6JFOJLy k+pzEgszogvKs1JLT7EKMPBoSTBG6b3NFJIsCg1PbUiLTMHGK UwaQkOHiUR3h6QNG9xQWJucW Y6ROoUozHHhpt3/zBx7AORQix5+XmpUuK8WSCl AiClGaV5cINgyeMSo6yUMC8j0GlCPAWpRbm ZJajyrxjFORiVhHm7QabwZOaVwO17B XQKE9Ap65yegJxSkoiQkmpgZLS1frpDmk0tTrhOrTGI o8CexzKNu+ysdG3/dK5NK5JO9i yY3dq897VQBfNyJbfV69IkN2qql6hFcMiwHPhzp+vQLaOiY g2jx007Wqtuuevsf5H44vw+ Jq59X1qcF96cenHaXYXsFY6rOr0qz2/pmLchV55FOVt+47mud9 qH9t7w+OLlfPCFEktxR qKhFnNRcSIAemynyRkDAAA=
Mapi-x-env-sender: [email protected]
Mapi-x-junkmail-premium-raw: score=7/83,refid=2.7.2:2017.10.16.215417:17:7.586,ip=,rules=__PHISH_SPEAR_HTTP_R ECEIVED, __TO_MALFORMED_2, __TO_NO_NAME, __TO_NAME, __TO_NAME_DIFF_FROM_ACC, __HAS_CC_HDR, __CC_NAME, __CC_NAME_DIFF_FROM_ACC, __HAS_MSGID, __SANE_MSGID, __IN_REP_TO, __REFERENCES, __MIME_VERSION, __CT, __CTYPE_MULTIPART_ALT, __CTYPE_HAS_BOUNDARY, __CTYPE_MULTIPART, __USER_AGENT, WEBMAIL_XOIP, __HAS_XOIP, __HAS_FROM, __FRAUD_WEBMAIL_FROM, WEBMAIL_X_IP_HDR, __MIME_TEXT_P2, __MIME_TEXT_H2, __MULTIPLE_URI_TEXT, __URI_IN_BODY, __URI_NOT_IMG, __HAS_HTML, __HTML_TAG_DIV, BODY_SIZE_4000_4999, BODYTEXTP_SIZE_3000_LESS, BODYTEXTH_SIZE_10000_LESS, __MIME_TEXT_H1, __MIME_TEXT_P1, __MIME_HTML, __TAG_EXISTS_HTML, BODY_SIZE_5000_LESS, __FRAUD_WEBMAIL, WEBMAIL_SOURCE, IN_REP_TO, MSG_THREAD, __TO_REAL_NAMES, __CC_REAL_NAMES, LEGITIMATE_SIGNS,
PROTECTED
NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10490943
NO_URI_FOUND, NO_CTA_URI_FOUND, __PHISH_SPEAR_STRUCTURE_1, __URI_NO_PATH, __MIME_TEXT_H, __MIME_TEXT_P, REFERENCES, NO_URI_HTTPS, BODY_SIZE_7000_LESS, URI_WITH_PATH_ONLY
Mapi-x-ms-exchange-organization-authas: Anonymous
Mapi-x-ms-exchange-organization-authsource: corex702.corp.rta.nsw.gov.au
Mapi-x-msg-ref: server-6.tower-86.messagelabs.com!1508192009!123084261!1
Mapi-x-originating-ip: [49.180.147.192]
Mapi-x-sid: 83
Mapi-x-spamreason: No, hits=0.6 required=7.0 tests=HTML_40_50,HTML_MESSAGE
Mapi-x-starscan-received:
Mapi-x-starscan-version: 9.4.45; banners=-,-,-
Mapi-x-viruschecked: Checked
Message-ID: <[email protected]>
MIME-Version: 1.0
Received: from mx21.rta.nsw.gov.au (163.189.207.4) by corex702.corp.rta.nsw.gov.au (163.189.3.155) with Microsoft SMTP Server id 8.3.485.1; Tue, 17 Oct 2017 09:13:37 +1100 from mail6.bemta8.messagelabs.com ( [216.82.243.55]) (using TLS with cipher DHE-RSA- AES256-SHA (256/256 bits)) (Client CN "mail6.bemta8.messagelabs.com", Issuer "Symantec Class 3 Secure Server CA - G4" (verified OK)) by mx21.rta.nsw.gov.au (Symantec Mail Security) with SMTP id EE.0C.03944.F0F25E95; Tue, 17 Oct 2017 09:13:36 +1100 (EST) from [216.82.242.179] by server-6.bemta-8.messagelabs.com id E5/04-02223-C0F25E95; Mon, 16 Oct 2017 22:13:32 +0000 (qmail 106891 invoked from network); 16 Oct 2017 22:13:31 -0000 from nsstlmta12p.bpe.bigpond.com (HELO nsstlmta12p.bpe.bigpond.com) (203.38.21.12) by server-6.tower-86.messagelabs.com with DHE-RSA-AES256-GCM-SHA384 encrypted SMTP; 16 Oct 2017 22:13:31 -0000 from smtp.telstra.com ([10.10.24.4]) by nsstlfep12p-svc.bpe.nexus.telstra.com.au with ESMTP id <20171016221328.HQZQ31141.nsstlfep12p- PROTECTED
NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10490943
[email protected]>; Tue, 17 Oct 2017 09:13:28 +1100 from [10.10.24.4] (10.10.24.4) by smtp.telstra.com (9.0.019.16-1) id 59D67F620372304A; Tue, 17 Oct 2017 09:13:27 +1100 from [49.180.147.192] by email.telstra.com with HTTP; Tue, 17 Oct 2017 09:13:27 +1100
References: <[email protected]> <[email protected]> <[email protected]>
Return-Path:
Subject: Thank You-Fernando Garza-(IRD)
To:
User-Agent: OWM Mail 3
X-Auditid: a3bdcf04-f79306d000000f68-11-59e52f0cab66
X-Brightmail-Tracker: H4sIAAAAAAAAA1VTf0gTYRj22655Di/OzfLNMmv003Bmvwzph2mJgZD4h7SI6sxrW+ mU27QZ CpVoOUWNWaIplJGo2FyKtiCdGqiZaZiSZkrRhFIknZKZUt12Z9o/H8/3Ps/7vM/7cYcLJd Mi b5zW62hGQ8XLRGJsMHomyJ8MGFPsft/te7CudQILQREvsitRFDojPhRHx6tTaCbgyAWx yvQp PGl8i95a3oquI7OvAbnhElIOTXllQgcGch/8qK7l8Vp4O1orMiAxq/ksAFNvnYBrSIPJN+XI QQDZ7gq3JxtduQ5/GLltRxwOA7s9i8ebwDqax2tOQH1e5ioDwlnsCcabwVx5Jxjn5kQc9gL j wyohN+skWPt6MC5ED4KZW69ducsfBFn213yHBHJr5/lEuTgsDn3lc2cjsHcXYZwXBQ22 fucO nmQwWFo7nVjIPkCh5aMzHkEehsWOfudsNzIc6keHEWf0DEGRudC5j5TcDl0fWxHX4A Gvim0Y Z3QOKm1Fzvoa9vVypp7y8dzAaLPyWAb5s03OASLyFFgXMkQFaHPJCquSFVYcPgCGB gOPd0HF wwkhh7fBcOOA68r6AySqRtIE/Z5AOaOj5BrtVbkyMUVOJdch9jt51NSLWVBVTWQbInE kcyea YUwhWUWlaFMT2tA6XCBbQ4QF2hSS1bGJcakqSqs6zyTH09o2BLhQ5knM+rFyIo5KvU YziUvU ehyTeREdH0YVElJJ6egrNJ1EM0vsBhyXAREjZxs9GFpJ6y+p43XLtAB3c5i7s+adDg2hTaI S tGolx3ehvbh5aGRRgDc7TgmmSdTQ3l5Euz8rJR1SVbLmn9vSn9CHfLylBHJxcZG4s0kS1 Lr/ +XHkxS4vJcwOF3e1Rvdv3jgbRcBGMYXaHFF01DLlfR35lDWkh0TGZe2N6Fu8b2g/PZs2
PROTECTED
NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10490943
nO6h f/54x93LeerpoYV34ifBheklQcqwquO/cr7G1gweu7OgjGkRni/wKc1OenkxI82UvT/wW7Q0 9WVoRe7R/MxHX7aW/zxkt3T0NUVFfrgRWtWZeaRlvsWl/Z6vn7Fso3hg6ux3ZmaW/l06 YCie l2FaFRXoJ2S01F9Px0nlBAQAAA== H4sIAAAAAAAAA+NgFmpjleJIrShJLcpLzFFi42I5rSbKo8ut/zT S4PpBC4tNB1+zODB67OlcwRjAGMWamZeUX5HAmrF8/jSmgskqFfsXHWRsYNwg38X IxSEk8IdR YtaEhUxdjJwcEgJCEj3rfzKCJCQE/rNLzHk9nQmiqoNRYur2DewgVUICCRK/llwD6xARs JLYc fAEmM0soCcxZccdsBpeAVuJP8evMIPYnAJuEpvv3WaEGLSVUeLL7OlgCWEBdYlTdw4 yQjQISp yc+YQFYlCsxJrzk8FqRAXEJLo/bGSDOI9TYvKT/VC2kkT/l71gNWwC/hL7fzeDxVkEdC Sev9n IOIFRaBaSsbOQjIWwzSS6tnYxQtjaEssWvoaKq0nc3naVHVl8ASPbKkb14tSistQiXTO9pK LM 9IyS3MTMHF1DAwu93NTi4sT01JzEpGK95PzcTYzA2GAAgh2Mn/qdDzFKcjApifI6Gz6J FOJLy k+pzEgszogvKs1JLT7EKMPBoSTBG6b3NFJIsCg1PbUiLTMHGKUwaQkOHiUR3h6QNG 9xQWJucW Y6ROoUozHHhpt3/zBx7AORQix5+XmpUuK8WSClAiClGaV5cINgyeMSo6yUMC8j0GlC PAWpRbm ZJajyrxjFORiVhHm7QabwZOaVwO17BXQKE9Ap65yegJxSkoiQkmpgZLS1frpDmk0tTrh OrTGI o8CexzKNu+ysdG3/dK5NK5JO9iyY3dq897VQBfNyJbfV69IkN2qql6hFcMiwHPhzp+vQL aOiY g2jx007Wqtuuevsf5H44vw+Jq59X1qcF96cenHaXYXsFY6rOr0qz2/pmLchV55FOVt+47mu d9 qH9t7w+OLlfPCFEktxRqKhFnNRcSIAemynyRkDAAA=
X-Env-Sender: [email protected]
X-Junkmail-Premium-Raw: score=7/83,refid=2.7.2:2017.10.16.215417:17:7.586,ip=,rules=__PHISH_SPEAR_HTTP_R ECEIVED, __TO_MALFORMED_2, __TO_NO_NAME, __TO_NAME, __TO_NAME_DIFF_FROM_ACC, __HAS_CC_HDR, __CC_NAME, __CC_NAME_DIFF_FROM_ACC, __HAS_MSGID, __SANE_MSGID, __IN_REP_TO, __REFERENCES, __MIME_VERSION, __CT, __CTYPE_MULTIPART_ALT, __CTYPE_HAS_BOUNDARY, __CTYPE_MULTIPART, __USER_AGENT, WEBMAIL_XOIP, __HAS_XOIP, __HAS_FROM, __FRAUD_WEBMAIL_FROM, WEBMAIL_X_IP_HDR, __MIME_TEXT_P2, __MIME_TEXT_H2, __MULTIPLE_URI_TEXT, __URI_IN_BODY, __URI_NOT_IMG, __HAS_HTML, __HTML_TAG_DIV, BODY_SIZE_4000_4999, BODYTEXTP_SIZE_3000_LESS, BODYTEXTH_SIZE_10000_LESS, __MIME_TEXT_H1, __MIME_TEXT_P1, __MIME_HTML, __TAG_EXISTS_HTML, BODY_SIZE_5000_LESS, __FRAUD_WEBMAIL, WEBMAIL_SOURCE, IN_REP_TO, MSG_THREAD, __TO_REAL_NAMES, __CC_REAL_NAMES, LEGITIMATE_SIGNS, NO_URI_FOUND, NO_CTA_URI_FOUND, __PHISH_SPEAR_STRUCTURE_1, __URI_NO_PATH, __MIME_TEXT_H, __MIME_TEXT_P, REFERENCES, NO_URI_HTTPS, BODY_SIZE_7000_LESS, URI_WITH_PATH_ONLY
PROTECTED
NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10490943
X-Msg-Ref: server-6.tower-86.messagelabs.com!1508192009!123084261!1
X-Originating-Ip: [203.38.21.12] [49.180.147.192]
X-Rg-Spam: Unknown
X-Sid: 83
X-Spamreason: No, hits=0.6 required=7.0 tests=HTML_40_50,HTML_MESSAGE
X-Starscan-Received:
X-Starscan-Version: 9.4.45; banners=-,-,-
PROTECTED
NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10492003 !" "#$ % & '% ( )*& $+,(& -" ( " !. / 0 1 2 1 1 23 4$' 3%'3 .5' % %' % % ' % %4 %(&3 . 6 /$578 +97:77;999<7799
! " " !"# $ %&'( ) *+(' )! ,-+ . ,!/! 01 !)!2 32! . #" $ % & -.& - /& 0 - 1 -2) (3# -4 5 6''3 7896*:-. ;52 6''3 NSW ICAC EXHIBIT E18-0281-AS-2-1-PR-0001 D10549098 ! "#$%& '$()$%*%+),(($$ - # ./ 0)& '$()# ($(*/ # !
!" # $ # %&# %#' ()*+,- .( -/0 " 1 561 7+ 1 8 91 1
! " # # " "
! "
&' ()'*+ !" # ./01%% 1 $'2/ # * /3 / / 4 # 1 ' /#/1$1 / ' $2 / 2/ 4/ 4! 1 /% 25 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT
E18/0281/AS-09-001/PR-0003 NSW ICAC EXHIBIT E18-0281-AS-2-43-PR-0001 D10531945 ! !" # # $ %& '($) ! $ ! * + # #, #$ - * . +/01 #'0232401'352000
!" #$%&'($)'* * " + ! " #$
!" ,, #$%&'($)'* * " + %#$ $ &$ '' & ' -. $% / 00 !" #$%&'($)'* * " +
( ) #$ ' * +' , ' !" $% // -. $%&'($)'* * " +
(- ( . & & ' *- * . / & 0 & NSW ICAC EXHIBIT E18-0281-AS-2-43-PR-0001 D10531945
! " ! &&&''&' ' (( ) * $% NSW ICAC EXHIBIT NSW ICAC EXHIBIT NSW ICAC EXHIBIT NSW ICAC EXHIBIT NSW ICAC EXHIBIT NSW ICAC EXHIBIT
E18-0281-AS-09-001-PR-0004 D1053822 NSW ICAC EXHIBIT NSW ICAC EXHIBIT
E18-0281-AS-09-001-PR-0004 D1053822 NSW ICAC EXHIBIT
E18-0281-AS-09-001-PR-0004 D1053822 NSW ICAC EXHIBIT
E18-0281-AS-09-001-PR-0004 D1053822 NSW ICAC EXHIBIT
E18-0281-AS-09-001-PR-0004 D10538223 NSW ICAC EXHIBIT
E18-0281-AS-09-001-PR-0004 D10538223 NSW ICAC EXHIBIT
E18-0281-AS-09-001-PR-0004 D10538223 NSW ICAC EXHIBIT
E18-0281-AS-09-001-PR-0004 D10538223 NSW ICAC EXHIBIT
E18-0281-AS-09-001-PR-0004 D10538223 NSW ICAC EXHIBIT
E18-0281-AS-09-001-PR-0004 D10538223 NSW ICAC EXHIBIT
E18-0281-AS-09-001-PR-0004 D10538223