DOCSLIB.ORG

Chemical Disposition of Plutonium in Hanford Site Tank Wastes

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Chemical Disposition of Plutonium in Hanford Site Tank Wastes PNNL-23468 WTP-RPT-234 Rev. 0 Chemical Disposition of Plutonium in Hanford Site Tank Wastes CH Delegard SA Jones February 2015 PNNL-23468 WTP-RPT-234 Rev. 0 Chemical Disposition of Plutonium in Hanford Site Tank Wastes CH Delegard SA Jones February 2015 Prepared for the U.S. Department of Energy Under Contract DE-AC05-76RL01830 Pacific Northwest National Laboratory Richland, Washington 99352 Summary This report examines the chemical disposition of plutonium (Pu) in Hanford Site tank wastes, by itself and in its observed and potential interactions with the neutron absorbers aluminum (Al), cadmium (Cd), chromium (Cr), iron (Fe), manganese (Mn), nickel (Ni), and sodium (Na). Consideration also is given to the interactions of plutonium with uranium (U). No consideration of the disposition of uranium itself as an element with fissile isotopes is considered except tangentially with respect to its interaction as an absorber for plutonium. The report begins with a brief review of Hanford Site plutonium processes, examining the various means used to recover plutonium from irradiated fuel and from scrap, and also examines the intermediate processing of plutonium to prepare useful chemical forms. The paper provides an overview of Hanford tank defined-waste–type compositions and some calculations of the ratios of plutonium to absorber elements in these waste types and in individual waste analyses. These assessments are based on Hanford tank waste inventory data derived from separately published, expert assessments of tank disposal records, process flowsheets, and chemical/radiochemical analyses. This work also investigates the distribution and expected speciation of plutonium in tank waste solution and solid phases. For the solid phases, both pure plutonium compounds and plutonium interactions with absorber elements are considered. These assessments of plutonium chemistry are based largely on analyses of idealized or simulated tank waste or strongly alkaline systems. The very limited information available on plutonium behavior, disposition, and speciation in genuine tank waste also is discussed. The assessments show that plutonium coprecipitates strongly with chromium, iron, manganese and uranium absorbers. Plutonium’s chemical interactions with aluminum, nickel, and sodium are minimal to non-existent. Credit for neutronic interaction of plutonium with these absorbers occurs only if they are physically proximal in solution or the plutonium present in the solid phase is intimately mixed with compounds or solutions of these absorbers. No information on the potential chemical interaction of plutonium with cadmium was found in the technical literature. Definitive evidence of sorption or adsorption of plutonium onto various solid phases from strongly alkaline media is less clear-cut, perhaps owing to fewer studies and to some well-attributed tests run under conditions exceeding the very low solubility of plutonium. The several studies that are well-founded show that only about half of the plutonium is adsorbed from waste solutions onto sludge solid phases. The organic complexants found in many Hanford tank waste solutions seem to decrease plutonium uptake onto solids. A number of studies show plutonium sorbs effectively onto sodium titanate. Finally, this report presents findings describing the behavior of plutonium vis-à-vis other elements during sludge dissolution in nitric acid based on Hanford tank waste experience gained by lab-scale tests, chemical and radiochemical sample characterization, and full-scale processing in preparation for strontium-90 recovery from PUREX sludges. S.1 Objective The objective of this report is to summarize and evaluate the large amount of experimental and theoretical work and literature reports relating to the disposition of plutonium in tank waste, especially with respect to its interactions with compounds of the neutron-absorbing elements aluminum, cadmium, chromium, iron, manganese, nickel, sodium, and uranium. iii Table S - 1 summarizes the objectives that apply to this task. Table S - 1: Summary of Work Objectives and Results Objective Work Objective Met? Discussion Review the known technical Yes The report provides an overview of Hanford Site plutonium literature related to the processes, describes the Hanford Defined Waste properties with disposition of plutonium in respect to plutonium and neutron absorber relative concentrations, alkaline Hanford tank waste, and lists absorber element compounds observed and postulated to be including plutonium’s present in Hanford tank waste sludges, the primary locus of interactions with compounds of plutonium in the tank waste. It then presents an extensive review of the neutron-absorbing elements plutonium chemistry in Hanford tank waste and in alkaline systems aluminum, cadmium, chromium, as gleaned from the technical literature dating from the time of the iron, manganese, nickel, sodium, Manhattan Project. The report further describes the disposition of and uranium. plutonium sent to the tank waste as both solution and as solids. A discussion of plutonium’s interactions with compounds of the neutron absorber elements aluminum, cadmium, chromium, iron, manganese, nickel, and uranium through coprecipitation and sorption follows. Because of the high solubilities of most sodium salts, chemical interactions of plutonium are expected to be minimal except in the event of precipitation of lower-solubility salts such as sodium diuranate and that of the co-location of soluble sodium salts with less soluble sludge phases. Finally, the report summarizes the behavior of plutonium in the dissolution of genuine Hanford tank waste sludges by treatment with nitric acid. S.2 Work Exceptions No work exceptions are applicable to this report. S.3 Results and Performance against Success Criteria Table S - 2 presents research and technology (R&T) success criterion for achieving the work objective. iv Table S - 2: The Success Criterion for the Plutonium Disposition Review Task Success Criterion How Work Did or Did Not Meet the Success Criterion Review the known technical literature This success criterion was met. The report summarizes over 100 technical related to the disposition of plutonium publications found in journals, from the Hanford, Savannah River, and in alkaline Hanford tank waste other US-DOE Sites, and international sources related to the chemistry of including plutonium’s interactions with plutonium, absorber elements, and their joint interactions in Hanford tank compounds of neutron absorber waste and in related alkaline systems akin to Hanford tank waste. elements aluminum, cadmium, chromium, iron, manganese, nickel, sodium, and uranium. S.4 Quality Requirements The PNNL Quality Assurance (QA) Program is based upon the requirements defined in DOE Order 414.1D, Quality Assurance, and Title 10 of the Code of Federal Regulations Part 830, Energy/Nuclear Safety Management, and Subpart A—Quality Assurance Requirements (a.k.a. the Quality Rule). PNNL has chosen to implement the following consensus standards in a graded approach: ASME NQA-1-2000, Quality Assurance Requirements for Nuclear Facility Applications, Part 1, Requirements for Quality Assurance Programs for Nuclear Facilities. ASME NQA-1-2000, Part II, Subpart 2.7, Quality Assurance Requirements for Computer Software for Nuclear Facility Applications. ASME NQA-1-2000, Part IV, Subpart 4.2, Graded Approach Application of Quality Assurance Requirements for Research and Development. The procedures necessary to implement the requirements are documented through PNNL’s “How Do I…?” (HDI1). The Waste Treatment Plant Support Project (WTPSP) implements an NQA-1-2000 QA Program, graded on the approach presented in NQA-1-2000, Part IV, Subpart 4.2. The WTPSP Quality Assurance Manual (QA-WTPSP-0002) describes the technology life cycle stages under the WTPSP Quality Assurance Plan (QA-WTPSP-0001). The technology life cycle includes the progression of technology development, commercialization, and retirement in process phases of basic and applied research and development (R&D), engineering and production, and operation until process completion. The life cycle is characterized by flexible and informal QA activities in basic research, which become more structured and formalized through the applied R&D stages. The work described in this report has been completed under the QA technology level of basic research. WTPSP addresses internal verification and validation activities by conducting an independent technical review of the final data report in accordance with WTPSP procedure QA-WTPSP-601, Document Preparation and Change. This review verifies that the reported results are traceable, that inferences and conclusions are soundly based, and that the reported work satisfies the test plan objectives. 1 System for managing the delivery of PNNL policies, requirements, and procedures v S.5 R&T Test Conditions This report summarizes historical literature and government-sponsored reports that describe the chemistry of Hanford Site tank waste and plutonium and neutron absorber elements. No experimental testing was required to complete this review. Accordingly, the fields for summary of R&T Test Conditions, Table S - 3, are N/A for “not applicable.” Table S - 3: Summary of R&T Test Conditions R&T Test Condition Discussion N/A N/A S.6 Simulant Use No simulants were used in this literature review. S.7 Discrepancies and Follow-on Tests This report only summarizes historical literature and government-sponsored reports that describe the chemistry
Load more

Recommended publications
  • Transport of Dangerous Goods
    ST/SG/AC.10/1/Rev.16 (Vol.I) Recommendations on the TRANSPORT OF DANGEROUS GOODS Model Regulations Volume I Sixteenth revised edition UNITED NATIONS New York and Geneva, 2009 NOTE The designations employed and the presentation of the material in this publication do not imply the expression of any opinion whatsoever on the part of the Secretariat of the United Nations concerning the legal status of any country, territory, city or area, or of its authorities, or concerning the delimitation of its frontiers or boundaries. ST/SG/AC.10/1/Rev.16 (Vol.I) Copyright © United Nations, 2009 All rights reserved. No part of this publication may, for sales purposes, be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, electrostatic, magnetic tape, mechanical, photocopying or otherwise, without prior permission in writing from the United Nations. UNITED NATIONS Sales No. E.09.VIII.2 ISBN 978-92-1-139136-7 (complete set of two volumes) ISSN 1014-5753 Volumes I and II not to be sold separately FOREWORD The Recommendations on the Transport of Dangerous Goods are addressed to governments and to the international organizations concerned with safety in the transport of dangerous goods. The first version, prepared by the United Nations Economic and Social Council's Committee of Experts on the Transport of Dangerous Goods, was published in 1956 (ST/ECA/43-E/CN.2/170). In response to developments in technology and the changing needs of users, they have been regularly amended and updated at succeeding sessions of the Committee of Experts pursuant to Resolution 645 G (XXIII) of 26 April 1957 of the Economic and Social Council and subsequent resolutions.
    [Show full text]
  • Gas Phase Chemical Evolution of Uranium, Aluminum, and Iron Oxides Received: 22 January 2018 Batikan Koroglu1, Scott Wagnon 1, Zurong Dai1, Jonathan C
    www.nature.com/scientificreports OPEN Gas Phase Chemical Evolution of Uranium, Aluminum, and Iron Oxides Received: 22 January 2018 Batikan Koroglu1, Scott Wagnon 1, Zurong Dai1, Jonathan C. Crowhurst1, Accepted: 19 June 2018 Michael R. Armstrong1, David Weisz1, Marco Mehl1,2, Joseph M. Zaug1, Harry B. Radousky1 & Published: xx xx xxxx Timothy P. Rose1 We use a recently developed plasma-fow reactor to experimentally investigate the formation of oxide nanoparticles from gas phase metal atoms during oxidation, homogeneous nucleation, condensation, and agglomeration processes. Gas phase uranium, aluminum, and iron atoms were cooled from 5000 K to 1000 K over short-time scales (∆t < 30 ms) at atmospheric pressures in the presence of excess oxygen. In-situ emission spectroscopy is used to measure the variation in monoxide/atomic emission intensity ratios as a function of temperature and oxygen fugacity. Condensed oxide nanoparticles are collected inside the reactor for ex-situ analyses using scanning and transmission electron microscopy (SEM, TEM) to determine their structural compositions and sizes. A chemical kinetics model is also developed to describe the gas phase reactions of iron and aluminum metals. The resulting sizes and forms of the crystalline nanoparticles (FeO-wustite, eta-Al2O3, UO2, and alpha-UO3) depend on the thermodynamic properties, kinetically-limited gas phase chemical reactions, and local redox conditions. This work shows the nucleation and growth of metal oxide particles in rapidly-cooling gas is closely coupled to the kinetically-controlled chemical pathways for vapor-phase oxide formation. Gas phase nucleation and growth of metal oxide nanoparticles is an important topic for many areas of chemistry, physics, material science, and engineering1–6.
    [Show full text]
  • Royal Society of Chemistry Input to the Ad Hoc Nuclear
    ROYAL SOCIETY OF CHEMISTRY INPUT TO THE AD HOC NUCLEAR RESEARCH AND DEVELOPMENT ADVISORY BOARD The Royal Society of Chemistry (RSC) was pleased to hear of the instigation of the Ad Hoc Nuclear Research and Development Advisory Board (the Board) following the findings of the House of Lords Science and Technology Committee Inquiry ‘Nuclear Research and Development Capabilities’.1,2 The RSC is the largest organisation in Europe for advancing the chemical sciences. Supported by a network of 47,000 members worldwide and an internationally acclaimed publishing business, its activities span education and training, conferences and science policy, and the promotion of the chemical sciences to the public. This document represents the views of the RSC. The RSC has a duty under its Royal Charter "to serve the public interest" by acting in an independent advisory capacity, and it is in this spirit that this submission is made. To provide input to the Board the RSC has performed a wide consultation with the chemical science community, including members of both our Radiochemistry and Energy Sector Interest Groups and also our Environment Sustainability and Energy Division. September 2012 The Role of Chemistry in a Civil Nuclear Strategy 1 Introduction Chemistry and chemical knowledge is essential in nuclear power generation and nuclear waste management. It is essential that a UK civil nuclear strategy recognises the crucial role that chemistry plays, both in research and innovation and in the development of a strong skills pipeline. As the RSC previously articulated in our response to the House of Lords Inquiry, 3 nuclear power is an important component of our current energy mix.
    [Show full text]
  • Uranium Pyrophoricity Phenomena and Prediction
    SNF-6192-FP URANIUM PYROPHORICITY PHENOMENA AND PREDICTION Martin G. Plys, Michael Epstein, and Boro Malinovic Fauske & Associates, Inc. 16W070 W. 83rd St. Burr Ridge, Illinois 60521 USA (630) 323-8750 [email protected] ABSTRACT We have compiled a topical reference on the phenomena, experiences, experiments, and prediction of uranium pyrophoricity for the Hanford Spent Nuclear Fuel Project (SNFP) with specific applications to SNFP process and situations. The purpose of the compilation is to create a reference to integrate and preserve this knowledge. Decades ago, uranium and zirconium fires were commonplace at Atomic Energy Commission facilities, and good documentation of experiences is surprisingly sparse. Today, these phenomena are important to site remediation and analysis of packaging, transportation, and processing of unirradiated metal scrap and spent nuclear fuel. Our document, bearing the same title as this paper, will soon be available in the Hanford document system [Plys, et al., 2000]. This paper explains general content of our topical reference and provides examples useful throughout the DOE complex. Moreover, the methods described here can be applied to analysis of potentially pyrophoric plutonium, metal, or metal hydride compounds provided that kinetic data are available. A key feature of this paper is a set of straightforward equations and values that are immediately applicable to safety analysis. 1.0 BACKGROUND AND PURPOSE The phenomenon of pyrophoricity has been studied for chemical process safety and its mathematical formulation, ignition theory, is well established. We have applied ignition theory to experiments conducted with uranium powders and foils using recently available kinetic rate laws, and found that results can be explained and understood, where before these results were not quantified and were on occasion misinterpreted [Epstein, et al., 1996].
    [Show full text]
  • Molecular Characterization of Uranium(VI) Sorption Complexes on Iron(III)-Rich Acid Mine Water Colloids
    Geochimica et Cosmochimica Acta 70 (2006) 5469–5487 www.elsevier.com/locate/gca Molecular characterization of uranium(VI) sorption complexes on iron(III)-rich acid mine water colloids Kai-Uwe Ulrich a,*, Andre´ Rossberg a,b, Harald Foerstendorf a, Harald Za¨nker a, Andreas C. Scheinost a,b a Institute of Radiochemistry, FZ Rossendorf e.V., P.O. Box 510119, D-01314 Dresden, Germany b Rossendorf Beamline at ESRF, B.P. 220, F-38043 Grenoble, France Received 7 November 2005; accepted in revised form 21 August 2006 Abstract A mixing of metal-loaded acid mine drainage with shallow groundwater or surface waters usually initiates oxidation and/or hydrolysis of dissolved metals such as iron (Fe) and aluminum (Al). Colloidal particles may appear and agglomerate with increasing pH. Likewise chemical conditions may occur while flooding abandoned uranium mines. Here, the risk assessment of hazards requires reliable knowl- edge on the mobility of uranium (U). A flooding process was simulated at mesocosm scale by mixing U-contaminated acid mine water with near-neutral groundwater under oxic conditions. The mechanism of U-uptake by fresh precipitates and the molecular structure of U bonding were determined to estimate the mobility of U(VI). Analytical and spectroscopic methods such as Extended X-ray Absorption Fine-Structure (EXAFS) spectroscopy at the Fe K-edge and the U LIII-edge, and Attenuated Total Reflectance Fourier Transform Infra- red (ATR-FTIR) spectroscopy were employed. The freshly formed precipitate was identified as colloidal two-line ferrihydrite. It removed U(VI) from solution by sorption processes, while surface precipitation or structural incorporation of U was not observed.
    [Show full text]
  • Depleted Uranium Technical Brief
    Disclaimer - For assistance accessing this document or additional information,please contact [email protected]. Depleted Uranium Technical Brief United States Office of Air and Radiation EPA-402-R-06-011 Environmental Protection Agency Washington, DC 20460 December 2006 Depleted Uranium Technical Brief EPA 402-R-06-011 December 2006 Project Officer Brian Littleton U.S. Environmental Protection Agency Office of Radiation and Indoor Air Radiation Protection Division ii iii FOREWARD The Depleted Uranium Technical Brief is designed to convey available information and knowledge about depleted uranium to EPA Remedial Project Managers, On-Scene Coordinators, contractors, and other Agency managers involved with the remediation of sites contaminated with this material. It addresses relative questions regarding the chemical and radiological health concerns involved with depleted uranium in the environment. This technical brief was developed to address the common misconception that depleted uranium represents only a radiological health hazard. It provides accepted data and references to additional sources for both the radiological and chemical characteristics, health risk as well as references for both the monitoring and measurement and applicable treatment techniques for depleted uranium. Please Note: This document has been changed from the original publication dated December 2006. This version corrects references in Appendix 1 that improperly identified the content of Appendix 3 and Appendix 4. The document also clarifies the content of Appendix 4. iv Acknowledgments This technical bulletin is based, in part, on an engineering bulletin that was prepared by the U.S. Environmental Protection Agency, Office of Radiation and Indoor Air (ORIA), with the assistance of Trinity Engineering Associates, Inc.
    [Show full text]
  • Final Report
    BNL-52661 Formal Report MECHANISMS OF RADIONUCLIDE-HYROXYCARBOXYLIC ACID INTERACTIONS FOR DECONTAMINATION OF METALLIC SURFACES A.J. FRANCIS, C.J. DODGE, AND J.B. GILLOW Brookhaven National Laboratory, Upton, NY 11973 G.P. HALADA AND C.R. CLAYTON Department of Materials Science, SUNY at Stony Brook, NY 11794 FINAL REPORT PROJECT PERIOD: 10/1/98 TO 9/30/01 PROJECT NUMBER: 64946 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United State Government nor any agency thereof, nor any of their employees, not any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency, contractor, or subcontractor thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency, contractor or subcontractor thereof. MECHANISMS OF RADIONUCLIDE-HYROXYCARBOXYLIC ACID INTERACTIONS FOR DECONTAMINATION OF METALLIC SURFACES* A.J. FRANCIS, C.J. DODGE, AND J.B. GILLOW Brookhaven National Laboratory, Upton, NY 11973 G.P. HALADA AND C.R. CLAYTON Department of Materials Science, SUNY at Stony Brook, NY 11794 FINAL REPORT PROJECT PERIOD: 10/1/98 TO 9/30/01 PROJECT NUMBER: 64946 *This work was performed under the auspices of the U.S.
    [Show full text]
  • Inis: Terminology Charts
    IAEA-INIS-13A(Rev.0) XA0400071 INIS: TERMINOLOGY CHARTS agree INTERNATIONAL ATOMIC ENERGY AGENCY, VIENNA, AUGUST 1970 INISs TERMINOLOGY CHARTS TABLE OF CONTENTS FOREWORD ... ......... *.* 1 PREFACE 2 INTRODUCTION ... .... *a ... oo 3 LIST OF SUBJECT FIELDS REPRESENTED BY THE CHARTS ........ 5 GENERAL DESCRIPTOR INDEX ................ 9*999.9o.ooo .... 7 FOREWORD This document is one in a series of publications known as the INIS Reference Series. It is to be used in conjunction with the indexing manual 1) and the thesaurus 2) for the preparation of INIS input by national and regional centrea. The thesaurus and terminology charts in their first edition (Rev.0) were produced as the result of an agreement between the International Atomic Energy Agency (IAEA) and the European Atomic Energy Community (Euratom). Except for minor changesq the terminology and the interrela- tionships btween rms are those of the December 1969 edition of the Euratom Thesaurus 3) In all matters of subject indexing and ontrol, the IAEA followed the recommendations of Euratom for these charts. Credit and responsibility for the present version of these charts must go to Euratom. Suggestions for improvement from all interested parties. particularly those that are contributing to or utilizing the INIS magnetic-tape services are welcomed. These should be addressed to: The Thesaurus Speoialist/INIS Section Division of Scientific and Tohnioal Information International Atomic Energy Agency P.O. Box 590 A-1011 Vienna, Austria International Atomic Energy Agency Division of Sientific and Technical Information INIS Section June 1970 1) IAEA-INIS-12 (INIS: Manual for Indexing) 2) IAEA-INIS-13 (INIS: Thesaurus) 3) EURATOM Thesaurusq, Euratom Nuclear Documentation System.
    [Show full text]
  • Radiological Implications of Plutonium Recycle and the Use of Thorium Fuels in Power Reactor Operations
    01 RD/B/N3523 Central Electricity Generating Board Research Department Berkeley Nuclear Laboratories RADIOLOGICAL IMPLICATIONS OF PLUTONIUM RECYCLE AND THE USE OF THORIUM FUELS IN POWER REACTOR OPERATIONS By H. F. Macdonald XJ034 January 1976 DISCLAIMER Portions of this document may be illegible in electronic image products. Images are produced from the best available original document. Radiological Implications of Plutonium Recycle and the Use of Thorium Fuels in Power Reactor Operations “ by - H.F. Macdonald Approved Head of Health Physics Research Section For inclusion in Nuclear Science Abstracts SUMMARY As economically attractive sources of natural uranium are gradually depleted attention will turn to recycling plutonium or the use of thorium fuels. In this study the radiological implications of these fuel cycles in terms of fuel handling and radioactive waste disposal are investigated in 235 relation to a conventional U enriched oxide fuel. It is suggested that a comparative study of this nature may be an important aspect of the overall optimisation of future fuel cycle strategies. It is shown that the use of thorium based fuels has distinct advan­ tages in terms of neutron dose rates from irradiated fuels and long term a decay heating commitment compared with conventional uranium/plutonium fuels. However, this introduces a y dose rate problem in the fabrication 233 and handling of unirradiated U fuels. For both plutonium and thorium fuels these radiological problems increase during storage of the fuel prior to reactor irradiation. Finally, the novel health physics problems which arise in the handling and processing of thorium fuels are reviewed in an appendix.
    [Show full text]
  • Properties of Selected Radioisotopes
    CASE FILE COPY NASA SP-7031 Properties of Selected Radioisotopes A Bibliography PART I: UNCLASSIFIED LITERATURE NATIONAL AERONAUTICS AND SPACE ADMINISTRATION NASA SP-7031 PROPERTIES OF SELECTED RADIOISOTOPES A Bibliography Part I: Unclassified Literature A selection of annotated references to technical papers, journal articles, and books This bibliography was compiled and edited by DALE HARRIS and JOSEPH EPSTEIN Goddard Space Flight Center Greenbelt, Maryland Scientific and Technical Information Division / OFFICE OF TECHNOLOGY UTILIZATION 1968 USP. NATIONAL AERONAUTICS AND SPACE ADMINISTRATION Washington, D.C. PREFACE The increasing interest in the application of substantial quantities of radioisotopes for propulsion, energy conversion, and various other thermal concepts emphasizes a need for the most recent and most accurate information available describing the nuclear, chemical, and physical properties of these isotopes. A substantial amount of progress has been achieved in recent years in refining old and developing new techniques of measurement of the properties quoted, and isotope processing. This has resulted in a broad technological base from which both the material and information about the material is available. Un- fortunately, it has also resulted in a multiplicity of sources so that information and data are either untimely or present properties without adequately identifying the measurement techniques or describing the quality of material used. The purpose of this document is to make available, in a single reference, an annotated bibliography and sets of properties for nine of the more attractive isotopes available for use in power production. Part I contains all the unclassified information that was available in the literature surveyed. Part II is the classified counterpart to Part I.
    [Show full text]
  • Nuclear Chemistry Card Sort
    Nuclear Chemistry Card Sort Submitted by: Annette Gillespie, Ashely Gilomen, Sarah Johnson, and Stephanie Kimberlin Appalachian Regional Commission/Oak Ridge National Laboratory Summer Math-Science-Technology Institute Grade: 9-12 Lesson Duration: 45-60 minutes Materials Needed: • Media for Venn Diagram (e.g., poster board, white board, butcher paper, electronic devices) • One copy of the list of nuclear chemistry concepts/nuclear chemistry concept cards provided in this lesson plan • Envelope for storing cut-up list/cards Background Information: Students should be able to describe the basic structure of an atom and have a basic understanding of nuclear notation. Lesson Objective: Students will be able to • Describe the basic principles of nuclear chemistry. • Discern between diagrams and representations of nuclear equations and processes. • Use context clues to correctly categorize nuclear events. Instructional Process: All informative resources should be made available to the students so they can categorize the concepts (e.g., notes, text books, Internet). This lesson is best suited as an introduction activity for the beginning of the nuclear chemistry unit and/or as a review activity at the end of the nuclear chemistry unit. Students should be organized into groups of 3-4 to complete this activity. Each student group should create and label a three-circle Venn diagram on the teacher-designated media. (Refer to the examples provided in figure 1 and at the end of this lesson plan.) Each group should receive one copy of the list of nuclear chemistry concepts/nuclear chemistry concept cards, which they will cut up into individual cards. Once students have their diagrams drawn and cards cut out, they should place the nuclear chemistry concepts cards into one of three categories on the diagram: fission, fusion, or nuclear decay.
    [Show full text]
  • MICROREVIEW Reactivity of Polar Organometallic Compounds In
    MICROREVIEW Reactivity of Polar Organometallic Compounds in Unconventional Reaction Media: Challenges and Opportunities Joaquin García-Álvarez,*[a] Eva Hevia,*[b] and Vito Capriati*[c] This paper is gratefully dedicated to the memory of Dr. Guy Lavigne Abstract: Developing new green solvents in designing chemical chemicals in chemical transformations is, indeed, solvents used products and processes or successfully employing the already as reaction media, which account for 80–90% of mass utilization existing ones is one of the key subjects in Green Chemistry and is in a typical pharmaceutical/fine chemical operational process. especially important in Organometallic Chemistry, which is an Thus, the solvent itself is often a critical parameter especially in interdisciplinary field. Can we advantageously use unconventional drug product manufacturing and is as well responsible for most reaction media in place of current harsh organic solvents also for waste generated in the chemical industries and laboratories.[3] polar organometallic compounds? This Microreview critically Following these considerations, some of the most critical analyses the state-of-the-art on this topic and showcases recent and intriguing questions that arise are: Can we get traditional developments and breakthroughs which are becoming new research organic solvents out of organometallic reactions?[4] Can we use directions in this field. Because metals cover a vast swath of the protic, recyclable, biodegradable, and cheap unconventional periodic table, the content is organised into three Sections solvents also for highly reactive organometallic compounds? discussing the reactivity of organometallic compounds of s-, p- and Answering these questions would not only mean to break new d-block elements in unconventional solvents.
    [Show full text]