DOCSLIB.ORG

Battery Operated Power Tools

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Battery Operated Power Tools PREPARED IN RESPONSE TO QUESTIONS POSED AT FACILITY RFP PREBID MEETING ON 7-13-12. 1. Contracts managed by the facilities section. HVAC Janitorial Elevator Lloyds Pest Control Fire Extinguisher Fire Alarm Pool Service 2. Facilities Vehicles Unit Year and model 410 2003 Ford F150 ( Bi-fuel pickup) 414 2001 Ford E350 (gas) 415 1996 Ford E350 (gas) 416 1990 Enclosed scaffold trailer 422 1987 Chevrolet C-10 pickup (gas) 426 1988 Chevrolet Astro cargo (gas) 3. Tool Inventory Civic Center Tool Inventory Battery Operated Power Tools 1- Makita 18V Drill 1- Makita 18V Impact Drill 2-Dewalt 18V Drill 1- DeWalt 12V Drill 1-Dewalt 12V Impact Drill 1-Dewalt 12V Circular Saw 2-Dewalt 18V Sawzaw 1-Dewalt 18V Light 1- Hilti Drill 1-Hilti Impact Drill 1-Ryobi 18V Drill 1-Ryobi 18V Drill 1-Ryobi 18V Sazaw 1-Ryobi 18V light 1-Ryobi 18V Circular Saw 1-Amprobe R3000 Pro Wire Tracer 1-Amprobe G-3000 Pro Wire Tracer 1 1-Hilti Hammer Drill 1-Hilti Sawzaw 1-Greenlee lamp Tester Other Tools 1- Belt Sander 1- 6” & 12” Disc Abrasive Finishing Machine 1-Delta 10” Band Saw 1-Delta 14” Drill Press 1-Delta 10” Contractor’s Table Saw 1-Craftsman 10” Radial Arm Saw 1-Dewalt 12” Miter Saw 1-Delta 10” Miter Saw 1-Sears 3/4 Hp grinder Wheel 1- Port-A-Hog Dust hog 1- Lincoln Electric Portable Welder 1-MK Pro series Tile saw and stand 1-Dewalt 120V SawZaw 1-Graco Ultramax paint Sprayer 1 Rigid Navitrack Pipe tracer 1- Rigid See Snake Camera & Monitor 1- Ryobi Angle Grinder 1-Makita Circular Saw 120V 1-Sawmill 120V Circular Saw 1-Makita Router 1-Craftsman Staple Gun 1-Porter Cable Router 2-Dewalt Palm Sanders 120V 1-Bosch Multi Tool 120V 1- Drill Doctor 1-Rigid Sink Snake 1-3/8 Snake 1-Rigid Tri-Stand 1-Manual Key Machine 1-Craftsman 6” Bench Grinder 1-5.5Hp 25 gal Air Compressor 1-Craftsman Planer 2- 2000W Honda Gas Generator’s 1-Electric Circuit Tracers 1- Bosch 120V Jack Hammer 1-General Speed rooter power drain Cleaner 1-Honda Pressure Washer 1-Greenlee Hole Saw 1-Greenlee Hole Punch 2-Milwaukee Drills 120V 2 1-Dewalt Drill 120V 1-Dewalt Drywall Drill 1-No Name Drill 120V 1- Rigid Orbital Sander 120V 1- Dremmel 120V 1- Senco Air Nail Gun 1-Hitachi Air Nail Gun 2- Hilti Powershots 1-Porter Cable Right Angle Drill 1- Remington Power Actuated Tool 1-Roto-Zip 1-Craftsman Planer 1-Skill Sander 1-Bosch Jig Saw 120V 1-Nikota Heat Gun 1-Dewalt Jig Saw 120V 1-Schonstedt Cable Locator 1- Milwaukee120V Sawzaw 1-Hilti 120V Hammer Drill 1-Dremell 120V Saw Max 2- Genie 120V Wet-Vac 1-Milwaukee 120V Right Angle Drill 2- Hand Snakes 1-Milwaukee 120V Drill Misc Multiple sets of Screw Drivers Ratchet Sets Nut Drivers Pliers Hand Tools Senior Center Tool Inventory 1-Jr Ken-way snake 1-6’ ladder (Werner) 1-8’ ladder (Husky) 1-12’ladder (Werner) 1-Lil giant ladder 1-Ryobi 18v drill with charger NCC Tool Inventory 1-NSS pony 20 carpet extractor 1-Advance aqua-clean 18 carpet extractor 1- Windsor presto 2 gal upholstery cleaner 3 1- Duplex Roto-Wash carpet surface cleaner 1-Viper orbital floor scrubber polisher 1-Windsor admiral 10 gl. carpet extractor 1-50 ft drain snake 1-Genie 6 gl. wet dry vacuum 1-Ryobi 18 volt cordless drill charger 2 batteries 1- Toro electric blower 2- Upright Sanitaire vacuums DRC Tool Inventory Genie Manlift Advance auto scrubber Hild floor scrubber Rotowash carpet/tile scrubber Host dry extraction carpet cleaner 2 Sanitaire upright vacuum cleaner Dirt Devil canister vacuum Genie wet/dry vacuum Honda power washer Craftsman 2500 watt generator Oran 2100 watt generator Ken-Way 50 ft electric drain cleaner Super Vee 25 ft power drain cleaner Echo power leaf blower Toro electric leaf blower ½ inch Chicago power drill 3/8 inch Master Mechanic power drill Makita cordless 9.6v drill Master Mechanic 7 ¼ circular saw Craftsman Sander Sta-Rite fountain vacuum Purex Triton Pool vacuum Palintest pool water chemistry meter 4.
Load more

Recommended publications
  • 810 Hand and Power Tool Safety
    Hand and Power Tool Safety Hand and power tools can be very hazardous in construction and have the potential for causing severe injuries when used or maintained improperly. Special attention toward hand and power tool safety is necessary in order to reduce or eliminate these hazards. This course is designed to present to employees and employers a summary of the basic safety procedures and safeguards associated with hand and portable power tools. This page intentionally blank OSHAcademy Course 810 Study Guide [Hand and Power Tool Safety] Copyright © 2021 Geigle Safety Group, Inc. No portion of this text may be reprinted for other than personal use. Any commercial use of this document is strictly forbidden. Contact OSHAcademy to arrange for use as a training document. This study guide is designed to be reviewed off-line as a tool for preparation to successfully complete OSHAcademy Course 810. Read each module, answer the quiz questions, and submit the quiz questions online through the course webpage. You can print the post-quiz response screen which will contain the correct answers to the questions. The final exam will consist of questions developed from the course content and module quizzes. We hope you enjoy the course and if you have any questions, feel free to email or call: OSHAcademy 15220 NW Greenbrier Parkway, Suite 230 Beaverton, Oregon 97006 www.oshatrain.org [email protected] +1 (888) 668-9079 Disclaimer This document does not constitute legal advice. Consult with your own company counsel for advice on compliance with all applicable state and federal regulations. Neither Geigle Safety Group, Inc., nor any of its employees, subcontractors, consultants, committees, or other assignees make any warranty or representation, either express or implied, with respect to the accuracy, completeness, or usefulness of the information contained herein, or assume any liability or responsibility for any use, or the results of such use, of any information or process disclosed in this publication.
    [Show full text]
  • Project Book 1-Chapter 5: Power Tools for Fastening and Finishing May 7, 2020
    Advanced Woods Project Book 1-Chapter 5: Power Tools for Fastening and Finishing May 7, 2020 10-12 Advanced Woods Project Book 1-Chapter 5 : [May 7, 2020] Objective/Learning Target: Students will learn about different power tools used for fastening and finishing and how to use them properly. Power Tools for finishing and fastening What You Now Know -How to safely and effectively operate some power tools -The importance of safety when operating power tools What You Will Know -Which power tools to use during fastening and finishing processes -How to safely and effectively operate common finishing and fastening power tools 3 Introduction to Power tools -Driven by electric motors, batteries, or compressed air -Corded or cordless -Proper safety procedures must be followed -Appropriate PPE must be worn -Never use any power tool without proper training. 4 Power tool safety Avoiding Electric Shock -Any exposure to electric shock can be dangerous. -Nearly all shocks can be avoided. -Some tools are double insulated—two-pronged plug. -Some have a ground wire on the inside of the tool—three-pronged plug. -Avoid using power tools in damp places. 5 Power Tool safety Continued Safety Tags Do not put tools that need repair back on the shelf. Mark defective tools with a tag. ― List what is wrong with the tool. ― Write “Do Not Use” on the tag. 6 Power Drill Rotates a bit at a high rate of speed Used to create holes and to prevent materials from splitting Corded or battery powered Many have variable speed settings D-shaped or L-shaped handles Different sized
    [Show full text]
  • ET0001 Ryobi Cordless String Trimmer
    ET Tool Image Number Ryobi Cordless String Trimmer ET0001 (Includes battery and charger) Ryobi Cordless Cultivator ET0002 (Includes battery and charger) Dremel Rotary Tool Kit (8220) (Includes 30 ET0003 accessories, battery, charger & carrying case) Ryobi Driving ET0004 Kit (68-piece) Page 1 ET Tool Image Number Ryobi Wood ET0005 Drilling Kit (11- piece) Ryobi Impact ET0006 Driving Kit (26- piece) Ryobi Black ET0007 Oxide Drill Kit (21-piece_ Electrician's Tool Set (22- ET0008 piece, includes bag) Page 2 ET Tool Image Number Steel Single ET0009 Painter's Pole (5 ft) Wood Extension Pole ET0010 with Metal Tip (4 ft) Light Bulb Changer Kit ET0011 with Attachments (11 ft) ET0012 Torch Kit Page 3 ET Tool Image Number ITEM NO ITEM NO LONGER ET0013 LONGER AVAILABLE AVAILABLE P3 Kill A Watt EZ ET0014 Electricity Usage Monitor P3 Kill A Watt EZ ET0015 Electricity Usage Monitor P3 Kill A Watt EZ ET0016 Electricity Usage Monitor Page 4 ET Tool Image Number Ryobi One+ 18V 4 1/2 in. Angle Grinder ET0017 (Includes bag, battery and charger) Ryobi One+ 18V Compact Drill/Driver Kit ET0018 (Includes bag, battery and charger) ITEM NO ITEM NO LONGER ET0019 LONGER AVAILABLE AVAILABLE Ryobi One+ 18V Orbital Jigsaw (Includes bag, ET0020 battery, charger and 1 blade) Page 5 ET Tool Image Number Ryobi One+ 18V Belt Sander (Includes bag, ET0021 battery, charger and dust bag) Ryobi One+ 18V Drain Auger ET0022 (Includes bag, battery and charger) Ryobi One+ 18V Base with Multi- tool ET0023 Attachments (Includes bag, battery and charger) Ryobi One+ 18V Impact Driver ET0024 (Includes bag, battery and charger) Page 6 ET Tool Image Number ITEM NO ITEM NO LONGER ET0025 LONGER AVAILABLE AVAILABLE Ryobi One+ 18V 6-1/2 in.
    [Show full text]
  • Hand + Powertools Protocols + Training
    Computation & Construction Lab Safety Protocol + Tool SpecificTraining Table of Contents Safety Protocols 2 Personal Protective Equipment 3 Environment + Health Requirements 4 Reporting Accidents 5 Protection + Culture Tool Specific Training 7 Table Saw 10 Miter Saw 13 Jig Saw 16 Bandsaw 18 Reciprocating Saw 20 Circular Saw 22 Scroll Saw 25 Drill Press 28 Hand Router 31 Drill 33 Nail Gun 35 Combo Sander 38 Belt + Palm Sander Safety Protocols 1 Safety | Personal Protective Equipment Ear Protection • Use earplugs/earmuffs in high noise work areas where chainsaws or heavy equipment are used; clean or replace earplugs regularly. Work Gloves • Gloves should fit snugly. • Workers should wear the right gloves for the job (examples: heavy-duty rubber gloves for concrete work; welding gloves for welding; insulated gloves and sleeves when exposed to electrical hazards). Safety Glasses • Safety glasses or face shields are worn any time work operations can cause foreign objects to get in the eye. For example, during welding, cutting, grinding, nailing (or when working with concrete and/or harmful chemicals or when exposed to flying particles). Wear when exposed to any electrical hazards, including working on energized electrical systems. • Eye and face protectors – select based on anticipated hazards. Masks • Masks are worn to provent airborne dangers and allergens • Masks – select based on anticipated hazards. N95 recommended for anything with Silica. • Do not wear a respirator unless it is properly fitted. Vests • High visibility garments can be defined as clothing designed to make the wearer more visible Foot Protection • Construction workers should wear work shoes or boots with slip-resistant and puncture-resistant soles.
    [Show full text]
  • 611 Nail Gun Safety
    Nail Gun Safety Nail guns are used every day on many construction jobs, especially in residential construction. They boost productivity but also cause tens of thousands of painful injuries each year. This course is important for construction workers and contractors. It will discuss ways to protect yourself from nail gun injuries. We will also look at the types of training you will need to operate a nail gun on a worksite. Course 611 This page intentionally blank Course 611 OSHAcademy Course 611 Study Guide Nail Gun Safety Copyright © 2021 Geigle Safety Group, Inc. No portion of this text may be reprinted for other than personal use. Any commercial use of this document is strictly forbidden. Contact OSHAcademy to arrange for use as a training document. This study guide is designed to be reviewed off-line as a tool for preparation to successfully complete OSHAcademy Course 611. Read each module, answer the quiz questions, and submit the quiz questions online through the course webpage. You can print the post-quiz response screen which will contain the correct answers to the questions. The final exam will consist of questions developed from the course content and module quizzes. We hope you enjoy the course and if you have any questions, feel free to email or call: OSHAcademy 15220 NW Greenbrier Parkway, Suite 230 Beaverton, Oregon 97006 www.oshatrain.org [email protected] +1 (888) 668-9079 Disclaimer This document does not constitute legal advice. Consult with your own company counsel for advice on compliance with all applicable state and federal regulations. Neither Geigle Safety Group, Inc., nor any of its employees, subcontractors, consultants, committees, or other assignees make any warranty or representation, either express or implied, with respect to the accuracy, completeness, or usefulness of the information contained herein, or assume any liability or responsibility for any use, or the results of such use, of any information or process disclosed in this publication.
    [Show full text]
  • Professional Power Tool Accessories OCKINGBIRD
    Proposed 4th Edition Research for The North American Market Winter 2021 ©2020 Ciprus LLC All Rights Reserved ©2020 Ciprus LLC Professional Power Professional Accessories Tool Ciprus LLC • 9027 MOCKINGBIRD DRIVE • SUITE 201 • P.O. BOX 321 • SANIBEL, FL 33957­0321 • 860.767.7685 WWW.CIPRUS.COM The 2021 North American for Professional Power Tool Accessories Introduction Covid-19 has affected virtually all facets of our lives from how we live, & Research work and purchase our everyday needs. Many of these changes are im- pacting contractors as well. While traditional channels remain the Background mainstay of power tool accessory purchases, digital channels continue to grow in importance. Digital channels are time saving and convenient, but in the age of Covid-19 they may also be safer. Distributor consoli- dations are also playing a role in how professional contractors obtain their power tool accessories. Contractor distributor chains have contin- ued to grow often through acquisition. Contractor purchase data will be valuable in understanding the impact of these changes. Ciprus LLC is pleased to announce the 4th Edition of the North Ameri- can Market for Power Tool Accessories. Past Editions were published in 2004, 2011 and 2016 along with proprietary research in 1994 and 1998 The 2021 report, the most comprehensive of its type, will present a com- prehensive analysis of professional power tool accessory purchase ac- tivity in both the commercial and residential markets by 7 contractor types. The research will target 15 Professional Power Tool Accessories including all of the accessories shown in the chart below. I47.F?581?.I+J47.G++9.=,,422+7P.
    [Show full text]
  • Issue-144-September-2011.Pdf
    A Publication of the Mid-West Tool Collectors Association One Hand Ice Saws Article begins on page 16 Studying, Preserving, and Sharing Knowledge of Tools M-WTCA.ORG M-WfCA Logo Wooden Sign Article begins on page 32 September 2011 No. 144 The Gristmill Index Features Departments Ringing Out the Spirits ............ ......... ........... 15 Chaff . .. ..... ................. ......... .. .. .... 4 One-Hand Ice Saws - Part 2 ................... ........ 16 Committee Reports .... ......... ........... .. ..... .. .. 5 Archiving Our Articles ................................ 23 Area Meetings ....................................... 6 Little Know Facts - Found In The ??? ........ ... .. ...... 27 Another What's-It ........... ... .... ....... .......... 22 Welch & Griffiths - Boston Saw Makers .................. 28 Lest We Forget .......... .... ........... .... .. .. .. 26 Expanding on the M-WTCA Experience .......... .. ..... 29 You Can't Hear it Coming if it Doesn't Make a Sound ..... 31 Area Q's Support of Preservation & Education in North Carolina .. 30 Obituaries ........ ..... .. .. .. .... .. .... .. ..... 35 M-WTCA Logo Wooden Sign ......... .. .. ............ 32 Auxiliary ... ......... .. .. .... .. .. ..... .... ....... 38 Bracing for the Challenges of Collecting All of Them ..... 33 A Missing Link in the Disston History ... .............. .... 34 Saw Mystery ...... ... .. .......... ..... ............. 37 The Gristmill No. 144 September, 2011 Copyright 2011 by Mid-West Tool Collectors Directors Committee Chairman Association, Inc.
    [Show full text]
  • Always the Appropriate Accessories for Your Machine!
    ... always the appropriate accessories for your machine! Orbital sander sheets STANDARD punched type A punched type B punched Size: Width x length 93 x 230 mm 115 x 280 mm 93 x 230 mm 93 x 230 mm 115 x 280 mm Part.-No. Part.-No. Part.-No. Part.-No. Part.-No. Manufacturer / machine model 815- 812- 8181- 8182- 8187- UNIVERSAL With clamps without dust extraction x x AEG VS 130, VSE 130, VS 230 x x VSS 260/E, VS 230/E x VS 14, VS 20, VSE 20, VSS 20 x VSS 20/E, VS 250, VSE 250 x VSS 280, VSSE 280 x VS 280/E, FS 280 x ALPHA TOOLS ASS 280 x ATLAS COPCO VS 230, VSE 230, x x VSS 260, VSSE 260 x x VS 280 E, VS 280 SE x VSE 230, VSS 20 E x BLACK & DECKER DN 41 A, DN 41 AE, BD 175, BD 180, x x BD 180 E, KA 300, KA 185, KA 185 E x x BD 175, BD 180 E, DN 41 AE, x x DN 180 E, KA 186 E, KA 196, KC 185 E x x KC 273, KC 962, CD 400, VB 135 B x x SR 400, PL 52 BD 273, DN 49, DN 273, x DN 41 AE, DN 180 E, KC 962, x P 63-03, P 63-04, P 63-05, x KA 180 E, KA 274 EKA, x SR 410 E, VB 135 A, VB 250 E x KA 273 x KA 310, KA 320 EKA, KA330 EKA x x BOSCH GSS 23 AE, GSS 230 A/ AE x x PSS 23 A/AE, PSS 240 A/AE x x GSS 23 AE, PSS 230 x x GSS 9,6 V, GSS 140 A GSS 28 A/AE, GSS 280 A/AE, x PSS 28 AE, PSS 280 AE, PSS 300 AE x GSS 28 A x CASALS BLR 170, YLR 210 x x BLR 250 x LN 216, LR 228 x DEWALT DW 411, D26411 D26420, D26421 x D26422, D26423 x x EINHELL TC-OS 1520/1 x EST 170 x x RT-OS 30, TE-OS 2520 x BT-OS 280 E x BT-RS 420 E, RT-XS 28 232 Orbital sander sheets standard Orbital sander sheets STANDARD punched type A punched type B punched Size: Width x length 93 x 230 mm 115 x 280 mm 93 x 230 mm 93 x 230 mm 115 x 280 mm Part.-No.
    [Show full text]
  • U.S.SAWS G2 Dust Shroud U.S.SAWS’ 7” Generation 2 Shroud Is Made with Dual Density, High Wear, Non-Marking Polyurethane
    U.S.SAWS G2 Dust Shroud U.S.SAWS’ 7” Generation 2 shroud is made with dual density, high wear, non-marking polyurethane. They are manufactured with a steel wear stiffening band molded into the perimeter of the shroud for extra-long life and durability. With the U.S.SAWS shroud, the concrete dust is extracted so that the operator may work without exposure to harmful dust. The convertible shroud allows the operator to grind against a vertical surface. A support flange enables the shroud to flex and keep a tight seal over uneven surfaces while preventing the cup wheel from making contact with the shroud. 7” Convertible Pro G2 Dust Shroud: PN: SX60115-G2 • Polyurethane construction is wear resistant & creates a seal to trap the dust. • Lowered hose port increases maneuverability, lowering operator fatigue. • Flip up front edge allows the operator to grind directly up against a wall. This Dust Shroud is designed to fit 7” and 9” Metabo grinders including but not limited to W24-230, W24-180. 7” Convertible Hub G2 Dust Shroud: PN: SX65807M • Simple mounting system that is easy to use. • Wear resistant and creates a good seal to trap the dust. • Lowered hose port increases maneuverability, lowering operator fatigue. This Dust Shroud is designed to fit 7” and 9” Metabo grinders including but not limited to W24-230, W24-180, W2000. 7” Universal G2 Dust Shroud: PN: SX65807U • Universal mounting system fits a variety of popular grinders: Metabo, Makita, Dewalt, Bosch and more. • Built with a T-Bolt mounting clamp allowing for non-slip or fall off.
    [Show full text]
  • 2010 Financial Report Web 2.Pdf
    Contents Page 2 This is Hilti 3 Our mission statement – and how we live its values 4 Key figures 5 Management report 7 The Board of Directors 10 Other key management personnel 13 Corporate governance 15 Consolidated financial statements of Hilti Group 19 Auditors’ report on the consolidated financial statements 79 Financial statements of Hilti Corporation Ltd 83 Auditors’ report on the financial statements 94 Contact information 95 Next information 95 2010 Financial Report This is Hilti Page 3 This is Hilti We supply the construction industry with technologically superior products, systems and services. We provide innovative solutions that feature outstanding added value. We passionately create enthusiastic customers and build a better future with approximately 20,000 team members located in more than 120 countries around the world. We live clear values. Integrity, the courage to embrace change, teamwork and commitment are the foundations of our corporate culture. We combine long-term financial success with comprehensive responsibility toward society and the environment. Reciprocal tenets of openness, honesty, and tolerance apply to team members, partners and suppliers alike. Our corporate goal is to generate sustainable profitable growth. Our Mission Statement – and how we live its values Page 4 Our mission statement – and how we live its values Mission statement We create enthusiastic customers and build a better future! Enthusiastic customers We create success for our customers by identifying their needs and providing innovative and value-adding solutions. Build a better future We foster a company climate in which every team member is valued and able to grow. We develop win-win relationships with our partners and suppliers.
    [Show full text]
  • Exceptional People
    EXCEPTIONAL PEOPLE Working At TTI About TTI TTI is a world-class leader in the design, manufacturing and marketing of Power & Hand Tools, Outdoor Power Equipment, and Floor Care Appliances for consumers, professional and industrial users in the repair and construction industries, home improvement, and home and commercial cleaning. Our powerful brand lineup includes: l Power & Hand Tools — Milwaukee, Empire, Stiletto, Ryobi, Hart, AEG l Outdoor Products — Homelite, Ryobi l Floor Care — Hoover, Dirt Devil, Oreck, Vax At TTI we focus on four key principals: l Powerful Brands l Innovative Products l Operational Excellence l Exceptional People We pride ourselves on attracting and retaining Exceptional People. It is the 24,000 employees of TTI that have propelled us to be a world class leader in power tool, hand tool, outdoor and floor care products. www.TTIGroup.com TTI has been listed on The Stock Exchange of Hong Kong since 1990 (HKEx: 669) and maintains a Level 1 American Depositary Receipt (ADR) program through the Bank of New York (ADR: TTNDY). TTI Employees Fuel Innovation & Success In 1991 TTI had revenues of $300 million. 2017 reported $6.1 revenues were $6.1 billion. billion $300 million 1991 –––––––––––––––––––––2017 Working At TTI TTI offers tremendous career growth opportunity to our employees at all levels of the organization. Driven by the growth of our business, throughout TTI employees are given the opportunity to learn, develop and grow. Employees earn outstanding benefits and compensation packages. TTI is a fast paced, results driven environment where the sky is the limit. Compensation & Benefits At TTI TTI is proud to offer an outstanding package that includes: SALARY—Each employee receives competitive annual cash compensation.
    [Show full text]
  • BR Check Register (Financial Transparency) 1 Current Time: 07:18:02 LITTLETON PUBLIC SCHOOLS Consolidated Check Register Report from 3/1/2013 to 3/31/2013
    LITTLETON PUBLIC SCHOOLS Consolidated Check Register Report from 3/1/2013 to 3/31/2013 Check Check Date Payee Name Invoice Description Check Amount 00034472 03/06/13 A-1 SCUBA & TRAVEL AQUATICS CE 326745A Scuba Booties 2,962.00 00034473 03/06/13 ABNER, KATHLEEN C AP016055 Reimbursement 50.00 00034474 03/06/13 ABRAKADOODLE 0219131 Class Deposit/Sandburg SACC 100.00 00034475 03/06/13 ACE HARDWARE - LITTLETON 016237/1 Plumbing Supplies 19.18 00034476 03/06/13 AHERN, IAN ARCHIBALD AP016099 Reimbursement/Supplies 665.91 00034477 03/06/13 AMERICAN COUNCIL ON THE TEACHI 150 Standards Based Prof Developme 1,807.49 00034478 03/06/13 ANDERSON'S 5759383 Paw Magnets 552.45 00034479 03/06/13 ANDREWS FOODSERVICE SYSTEM 2093590 HONEY 45,121.31 00034480 03/06/13 APPLE COMPUTER INC 4230049802 Apple iPad Wi-Fi 16gb Black #M 2,654.00 00034481 03/06/13 ARAPAHOE COUNTY EARLY 323 Registration/Options Program 75.00 00034482 03/06/13 ARAPAHOE COUNTY TREASURER AP016078 Senior Citizen Tax Rebate Prog 257.50 00034483 03/06/13 ARAPAHOE HIGH SCHOOL AP016100 Imprest Chk Reimbursement 2/28 3,034.69 00034484 03/06/13 ARAPAHOE HIGH SCHOOL / PETTY C AP016081 Petty Cash Reimbursement 2/28 527.29 00034485 03/06/13 AUCONE, ELIZABETH C AP016056 Reimbursement/Meeting Snacks 36.31 00034486 03/06/13 AVENTA LEARNING 10-9729 Aventa on-line content for LPS 3,509.00 00034487 03/06/13 BAEZ, SABINE HILDEGARD AP016069 Reimbursement/Conf Registratio 100.00 00034488 03/06/13 BCN TELECOM INC 21279439 District Monthly Long Distance 225.85 00034489 03/06/13 BEARBOP PRESS AP016086 Presentation
    [Show full text]