DOCSLIB.ORG

Multi-Camera: Interactive Rendering of Abstract Digital Images

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Multi-Camera: Interactive Rendering of Abstract Digital Images MULTI-CAMERA: INTERACTIVE RENDERING OF ABSTRACT DIGITAL IMAGES AThesis by JEFFREY STATLER SMITH Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE December 2003 Major Subject: Visualization Sciences MULTI-CAMERA: INTERACTIVE RENDERING OF ABSTRACT DIGITAL IMAGES AThesis by JEFFREY STATLER SMITH Submitted to Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Approved as to style and content by: Ergun Akleman Richard Davison (Chair of Committee) (Member) John Keyser Phillip Tabb (Member) (Head of Department) December 2003 Major Subject: Visualization Sciences iii ABSTRACT Multi-Camera: Interactive Rendering of Abstract Digital Images. (December 2003) Jeffrey Statler Smith, B.E.D., Texas A&M University Chair of Advisory Committee: Dr. Ergun Akleman The purpose of this thesis is the development of an interactive computer-generated rendering system that provides artists with the ability to create abstract paintings simply and intuitively. This system allows the user to distort a computer-generated environment using image manipulation techniques that are derived from fundamen- tals of expressionistic art. The primary method by which these images will be ab- stracted stems from the idea of several small images assembled into a collage that represents multiple viewing points rendered simultaneously. This idea has its roots in the multiple-perspective and collage techniques used by many cubist and futurist artists of the early twentieth century. iv To my family and friends v ACKNOWLEDGMENTS I would like to express my sincere thanks to my thesis committee chair, Dr. Ergun Akleman, for sharing his expertise and for encouraging me to explore new creative ideas. I would also like to thank my committee members, Prof. Dick Davison and Dr. John Keyser, for providing their help and encouragement throughout this process. I would also like to thank Dr. Donald House, Prof. Robert Schiffhauer, and Michael Ringham for their valuable support and instruction. My thanks go to Manfred Mohr, Scott Snibbe, Stephen Parker, Robert Schiffhauer, and Dick Davison for allowing me to display their artwork in this thesis, and to Vinod Srinivasan, Michael Mistrot, and Michael Stanley for allowing me to adapt portions of their code for use in my thesis program. My gratitude goes also to all of the faculty and staff of the Viz Lab, who have provided answers to my questions and have enhanced my learning experience. Thanks also go to all the friends that I have made during my time in the Viz Lab, for sharing their ideas about art and for their all of their help and enthusiasm. Thanks especially to Lori Green, for her inspiration and for providing a great deal of encouragement and support. Finally, I would like to thank my parents, sister, and extended family for their love and guidance through the years. vi TABLE OF CONTENTS CHAPTER Page I INTRODUCTION .......................... 1 I.1.Motivation......................... 1 I.2.Introduction......................... 2 II RELATED WORK ......................... 5 II.1.TraditionalArtwork.................... 5 II.1.1. Cezanne....................... 5 II.1.2. Cubism....................... 6 II.1.3. OtherMovements.................. 7 II.1.4. Hockney....................... 9 II.2.ComputerGraphicsWork................. 10 II.2.1. AbstractRenderingApplications......... 12 II.2.2. Multiple-ViewApplications............ 13 II.2.3. Cubism-RelatedTechniques............ 15 III METHODOLOGY ......................... 18 III.1.SceneMethods....................... 18 III.2.CameraMethods...................... 19 III.3.ImagePlacementMethods................. 22 III.4.LightingandRenderingMethods............. 25 IV IMPLEMENTATION ........................ 28 IV.1.ViewportOptions...................... 28 IV.1.1.ViewportPlacement................ 29 IV.1.2.ViewportControl.................. 30 IV.2.CameraOptions...................... 31 IV.2.1.CameraPlacement................. 31 IV.2.2.CameraControl................... 33 IV.3.DrawingOptions...................... 36 IV.4.RenderingOptions..................... 39 VRESULTS.............................. 40 V.1.DigitalPaintings...................... 40 V.2.TraditionalMedia...................... 44 V.3.Animation.......................... 47 vii CHAPTER Page VI CONCLUSION AND FUTURE WORK .............. 53 REFERENCES ................................... 55 VITA ........................................ 58 viii LIST OF FIGURES FIGURE Page 1 Bathers I by Robert Schiffhauer. Image used with permission of Robert Schiffhauer. ............................ 6 2 Cubist Self-Portrait by Robert Schiffhauer. Image used with per- mission of Robert Schiffhauer. ...................... 8 3 P-197-K, acrylic on canvas, 136 cm x 136 cm, 1977, Collection Daimler-Chrysler, Germany. Copyright 1977 Manfred Mohr. Im- age used with permission of Manfred Mohr [15]. ............ 11 4 Bubble Harp and Motion Phone renderings. Copyright 1991-98 Scott Snibbe. Images used with permission of Scott Snibbe [22]. ... 13 5 Camera Painting by Akleman and Meadows [2]. ............ 17 6 Multi-Camera scene description. .................... 18 7 Examples of multiple-camera ”eye” surface shapes: (A) planar, (B) cylindrical, and (C) spherical. .................... 20 8 Examples of multiple-camera ”eye” and ”aim” surface shapes: (A) planar, (B) cylindrical, and (C) spherical. ............... 21 9 Control point-camera surface relationship. ............... 22 10 Control point-camera surface relationship after addition of ran- dom value to camera positions. ..................... 23 11 Multiple-view images of a cube composed from (A) a grid of in- dividual views, (B) individual views with random values added, and (C) individual views with random and overlap values added. .. 24 12 Two-dimensional view surface in image space showing control points and interpolated surface of individual views of a cube. ..... 25 ix FIGURE Page 13 (A) Diagram showing warm and cool light colors. (B) An example of diffuse and specular material colors with a shininess value of 5.0. (C) An example of a texture-mapped object. ........... 27 14 MultiCam interface with drawing area and side option panel. .... 30 15 MultiCam interface with jittered placement of overlapping viewports. 31 16 MultiCam interface showing viewport-control functionality. ...... 32 17 MultiCam interface with planar camera eye shape. .......... 33 18 MultiCam interface with cylindrical camera eye shape. ........ 34 19 MultiCam interface with spherical camera eye shape. ......... 35 20 U and V coordinates of a camera surface. ............... 36 21 MultiCam interface with camera control point manipulation. ..... 37 22 MultiCam interface showing warm-cool color modulation. ...... 38 23 MultiCam interface showing silhouette-edge rendering. ........ 39 24 Digital painting created in MultiCam showing five sides of a cube. .. 42 25 Digital painting using an abstract model created in MultiCam. .... 43 26 Cubist-style digital painting created in MultiCam. ........... 45 27 Abstract digital painting created in MultiCam. ............ 46 28 Reprint of original MultiCam rendering. ................ 47 29 MultiCam rendering worked over with acrylic paint and pastel chalk by Richard Davison. Image used with permission of Richard Davison. .................................. 48 30 MultiCam rendering worked over with charcoal and pastels by Richard Davison. Image used with permission of Richard Davison. 49 31 Frames from an abstract animation created with 48 cameras in MultiCam. ................................ 51 x FIGURE Page 32 Frames from an abstract animation created with approximately 250 cameras in MultiCam. ........................ 52 1 CHAPTER I INTRODUCTION I.1. Motivation As an artistic tool, the use of the computer is unparalleled in its versatility. The computer allows ideas and methods related to a wide range of media to converge and be redefined through the adaptability and robustness of computer software. Hence, computer art has become an increasingly popular means of creative expression and experimentation. As computer graphics technology advances toward an ability to reproduce reality through lifelike character animation and digital renderings indistinguishable from photographs, so grows the likelihood of a divergence from this goal in the spirit of the many non-representational art movements of the late nineteenth and early twentieth centuries. Just as technological advances have allowed computers to be used to create strikingly vivid images, so too should they allow computers to be used for the development of abstract images of high aesthetic value. In computer graphics, although there has been an increasing interest in artistic (or non-photorealistic) approaches, only a few truly abstract rendering approaches have been developed to create abstract digital paintings [1, 20, 23]. The goal of this thesis is to use 3D computer graphics technology to create a new framework for producing art in the 3D realm, one that emphasizes the creation of images that are abstract in nature. The journal model is IEEE Transactions on Visualization and Computer Graphics. 2 I.2. Introduction The departure from representational methods in traditional painting provides a dis- tinction between abstraction and realism that can be carried over into computer graphics. Realistic paintings, like photography, have a definite subject, and possess certain degrees of adherence to strict conventions of representing
Load more

Recommended publications
  • IRIS Performer™ Programmer's Guide
    IRIS Performer™ Programmer’s Guide Document Number 007-1680-030 CONTRIBUTORS Edited by Steven Hiatt Illustrated by Dany Galgani Production by Derrald Vogt Engineering contributions by Sharon Clay, Brad Grantham, Don Hatch, Jim Helman, Michael Jones, Martin McDonald, John Rohlf, Allan Schaffer, Chris Tanner, and Jenny Zhao © Copyright 1995, Silicon Graphics, Inc.— All Rights Reserved This document contains proprietary and confidential information of Silicon Graphics, Inc. The contents of this document may not be disclosed to third parties, copied, or duplicated in any form, in whole or in part, without the prior written permission of Silicon Graphics, Inc. RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure of the technical data contained in this document by the Government is subject to restrictions as set forth in subdivision (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS 52.227-7013 and/ or in similar or successor clauses in the FAR, or in the DOD or NASA FAR Supplement. Unpublished rights reserved under the Copyright Laws of the United States. Contractor/manufacturer is Silicon Graphics, Inc., 2011 N. Shoreline Blvd., Mountain View, CA 94039-7311. Indigo, IRIS, OpenGL, Silicon Graphics, and the Silicon Graphics logo are registered trademarks and Crimson, Elan Graphics, Geometry Pipeline, ImageVision Library, Indigo Elan, Indigo2, Indy, IRIS GL, IRIS Graphics Library, IRIS Indigo, IRIS InSight, IRIS Inventor, IRIS Performer, IRIX, Onyx, Personal IRIS, Power Series, RealityEngine, RealityEngine2, and Showcase are trademarks of Silicon Graphics, Inc. AutoCAD is a registered trademark of Autodesk, Inc. X Window System is a trademark of Massachusetts Institute of Technology.
    [Show full text]
  • Design and Speedup of an Indoor Walkthrough System
    Vol.4, No. 4 (2000) THE INTERNATIONAL JOURNAL OF VIRTUAL REALITY 1 DESIGN AND SPEEDUP OF AN INDOOR WALKTHROUGH SYSTEM Bin Chan, Wenping Wang The University of Hong Kong, Hong Kong Mark Green The University of Alberta, Canada ABSTRACT This paper describes issues in designing a practical walkthrough system for indoor environments. We propose several new rendering speedup techniques implemented in our walkthrough system. Tests have been carried out to benchmark the speedup brought about by different techniques. One of these techniques, called dynamic visibility, which is an extended view frustum algorithm with object space information integrated. It proves to be more efficient than existing standard visibility preprocessing methods without using pre-computed data. 1. Introduction Architectural walkthrough models are useful in previewing a building before it is built and in directory systems that guide visitors to a particular location. Two primary problems in developing walkthrough software are modeling and a real-time display. That is, how to easily create the 3D model and how to display a complex architectural model at a real-time rate. Modeling involves the creation of a building and the placement of furniture and other decorative objects. Although most commercially available CAD software serves similar purposes, it is not flexible enough to allow us to easily create openings on walls, such as doors and windows. Since in our own input for building a walkthrough system consists of 2D floor plans, we developed a program that converts the 2D floor plans into 3D models and handles door and window openings in a semi-automatic manner. By rendering we refer to computing illumination and generating a 2D view of a 3D scene at an interactive rate.
    [Show full text]
  • Digital Media: Bridges Between Data Particles and Artifacts
    DIGITAL MEDIA: BRIDGES BETWEEN DATA PARTICLES AND ARTIFACTS FRANK DIETRICH NDEPETDENTCONSULTANT 3477 SOUTHCOURT PALO ALTO, CA 94306 Abstract: The field of visual communication is currently facing a period of transition to digital media. Two tracks of development can be distinguished; one utilitarian, the other artistic in scope. The first area of application pragmatically substitutes existing media with computerized simulations and adheres to standards that have evolved out of common practice . The artistic direction experimentally investigates new features inherent in computer imaging devices and exploits them for the creation of meaningful expression. The intersection of these two apparently divergent approaches is the structural foundation of all digital media. My focus will be on artistic explorations, since they more clearly reveal the relevant properties. The metaphor of a data particle is introduced to explain the general universality of digital media. The structural components of the data particle are analysed in terms of duality, discreteness and abstraction. These properties are found to have significant impact on the production process of visual information : digital media encourage interactive use, integrate, different classes of symbolic representation, and facilitate intelligent image generation. Keywords: computerized media, computer graphics, computer art, digital aesthetics, symbolic representation. Draft of an invited paper for VISUAL COMPUTER The International Journal of Comuter Graphics to be published summer 1986. digital media 0 0. INTRODUCTION Within the last two decades we have witnessed a substantial increase in both quantity and quality of computer generated imagery. The work of a small community of pioneering engineers, scientists and artists started in a few scattered laboratories 20 years ago but today reaches a prime time television audience and plays an integral part in the ongoing diffusion of computer technology into offices and homes.
    [Show full text]
  • Proceedings of the Third Phantom Users Group Workshop
    _ ____~ ~----- The Artificial Intelligence Laboratory and The Research Laboratory of Electronics at the Massachusetts Institute of Technology Cambridge, Massachusetts 02139 Proceedings of the Third PHANToM Users Group Workshop Edited by: Dr. J. Kenneth Salisbury and Dr. Mandayam A.Srinivasan A.I. Technical Report No.1643 R.L.E. Technical Report No.624 December, 1998 Massachusetts Institute of Technology ---^ILUY((*4·U*____II· IU· Proceedings of the Third PHANToM Users Group Workshop October 3-6, 1998 Endicott House, Dedham MA Massachusetts Institute of Technology, Cambridge, MA Hosted by Dr. J. Kenneth Salisbury, AI Lab & Dept of ME, MIT Dr. Mandayam A. Srinivasan, RLE & Dept of ME, MIT Sponsored by SensAble Technologies, Inc., Cambridge, MA I - -C - I·------- - -- -1 - - - ---- Haptic Rendering of Volumetric Soft-Bodies Objects Jon Burgin, Ph.D On Board Software Inc. Bryan Stephens, Farida Vahora, Bharti Temkin, Ph.D, William Marcy, Ph.D Texas Tech University Dept. of Computer Science, Lubbock, TX 79409, (806-742-3527), [email protected] Paul J. Gorman, MD, Thomas M. Krummel, MD, Dept. of Surgery, Penn State Geisinger Health System Introduction The interfacing of force-feedback devices to computers adds touchability in computer interactions, called computer haptics. Collision detection of virtual objects with the haptic interface device and determining and displaying appropriate force feedback to the user via the haptic interface device are two of the major components of haptic rendering. Most of the data structures and algorithms applied to haptic rendering have been adopted from non-pliable surface-based graphic systems, which is not always appropriate because of the different characteristics required to render haptic systems.
    [Show full text]
  • Fast Shadows and Lighting Effects Using Texture Mapping
    Computer Graphics, 26,2, July 1992 ? Fast Shadows and Lighting Effects Using Texture Mapping Mark Segal Carl Korobkin Rolf van Widenfelt Jim Foran Paul Haeberli Silicon Graphics Computer Systems* Abstract u Generating images of texture mapped geometry requires projecting surfaces onto a two-dimensional screen. If this projection involves perspective, then a division must be performed at each pixel of the projected surface in order to correctly calculate texture map coordinates. We show how a simple extension to perspective-comect texture mapping can be used to create various lighting effects, These in- clude arbitrary projection of two-dimensional images onto geom- etry, realistic spotlights, and generation of shadows using shadow maps[ 10]. These effects are obtained in real time using hardware that performs correct texture mapping. CR Categories and Subject Descriptors: 1.3.3 [Computer Li&t v Wm&irrt Graphics]: Picture/Image Generation; 1.3,7 [Computer Graph- Figure 1. Viewing a projected texture. ics]: Three-Dimensional Graphics and Realism - colot shading, shadowing, and texture Additional Key Words and Phrases: lighting, texturemapping that can lead to objectionable effects such as texture “swimming” during scene animation[5]. Correct interpolation of texture coor- 1 Introduction dinates requires each to be divided by a common denominator for each pixel of a projected texture mapped polygon[6]. Producing an image of a three-dimensional scene requires finding We examine the general situation in which a texture is mapped the projection of that scene onto a two-dimensional screen, In the onto a surface via a projection, after which the surface is projected case of a scene consisting of texture mapped surfaces, this involves onto a two dimensional viewing screen.
    [Show full text]
  • System Models for Digital Performance by Reed Kram
    System Models for Digital Performance by reed kram B.S. Electrical Engineering Duke University June 1993 Submitted to the Program in Media Arts and Sciences, School of Architecture and Planning, in partial fulfillment of the requirements for the degree of Master of Science in Media Arts and Sciences at the Massachusetts Institute of Technology June 1998 Copyright Massachusetts Institute of Technology, 1998 All rights reserved author reed kram program in media arts and sciences May 8, 1998 certified by john maeda assistant professor of design and computation program in media arts and sciences, thesis supervisor stephen a. benton chair, departmental committee on graduate students program in media arts and sciences System Models for Digital Performance by Reed Kram Submitted to the Program in Media Arts and Sciences, School of Architecture and Planning, on May 8, 1998 in partial fulfillment of the requirements for the degree of Master of Science in Media Arts and Sciences Abstract This thesis defines a new dynamic pictographic visual language for describing interactive digital performance systems. We review the origins of system model languages, machine performance spaces, reconfigurable performance spaces, and human-computer interfaces for performance. We discuss a number of novel systems for digital performance created by the author. We then introduce the new, symbolic digital performance language in the form of a living diagram- matic environment called Modulator. Finally, we use the Modulator system to categorize digital performance spaces,
    [Show full text]
  • 3D Visibility: Analytical Study and Applications
    Universit´e Grenoble I – Joseph Fourier Sciences et G´eographie 3D Visibility: Analytical Study and Applications Fredo´ DURAND Dissertation presented in partial fulfillement of the requirements for the degree of Docteur de l’Universite´ Joseph Fourier, discipline informatique Arrˆet´e minist´eriel du 5 juillet 1984 et du 30 mars 1992 prepared at iMAGIS-GRAVIR/IMAG-INRIA. UMR CNRS C5527. to be defended on July the 12th, 1999 Comittee : Dinesh MANOCHA Reviewer Michel POCCHIOLA Reviewer Seth TELLER Reviewer Jacques VOIRON Examiner Jean-Claude PAUL Examiner Claude PUECH Advisor Georges DRETTAKIS Co-advisor 2 Acknowledgments Je d´edie cette th`esea ` mes parents eta ` l’ensemble des professeurs qui m’ont subi pendant ma longue scolarit´e. Claude aet´ ´ e plus qu’un directeur de th`ese pour moi. Il m’a fait profiter de sa grande exp´erience, tant du domaine que de la recherche en g´en´eral, et plus encore. J’ai particuli`erement appr´eci´e les voyages que nous avons fait ensemble, Barcelone et la Californie. L’ambiance qu’il sait faire r´egnerauseindel’´equipe est une richesse rare. Il a vraimentet´ ´ eun“p`ere spirituel” durant ces cinq ann´ees pass´ees ensemble. George a su m’arracheramesrˆ ` everies th´eoriques quand il le fallait. Il n’a pas h´esit´e`a mettre les mains dans le code, je n’en aurai jamais fait autant sans lui. Il a effectu´e un travail consid´erable pour transformer ce que je r´edigeais en phrases anglaises. Ils ont tous deux eu le m´erite de supporter ma tˆete de mule et mon caract`ere de jeune coq..
    [Show full text]
  • Virtual Sculpting with Haptic Displacement Maps Robert Carl
    Virtual Sculpting with Haptic Displacement Maps by Robert Carl Jagnow Submitted to the Department of Electrical Engineering and Computer Science in partial fulfillment of the requirements for the degree of Master of Science in Computer Science and Engineering at the MASSACHUSETTS INSTITUTE OF TECHNOLOGY June 2001 @ 2001 Massachusetts Institute of Technology. All rights reserved. Author .. ............................................... ..... Department of Electrical Engineering and Com ulr Science Feb ary 1, 2001 Certified by.................... .......................... ... ........ Julie Dorsey Associate Professor of Computer Science and Engineering Thesis Supervisor Accepted by ........... .... Arthur C. Smith Chairman, Department Committee on Graduate Students MASSACHUSEUTS INSTI-TUTE BARKER OF TECHNOLOGY APR 2 4 2001 -LIBRARIES Virtual Sculpting with Haptic Displacement Maps by Robert Carl Jagnow Submitted to the Department of Electrical Engineering and Computer Science on February 1, 2001, in partial fulfillment of the requirements for the degree of Master of Science in Computer Science and Engineering Abstract This thesis presents an efficient data structure that facilitates high-speed haptic (force feedback) interaction with detailed digital models. Complex models are partitioned into coarse slabs, which collectively define a piecewise continuous vector field over a thick volumetric region surrounding the surface of the model. Within each slab, the surface is represented as a displacement map, which uses the vector field to define a relationship between points in space and corresponding points on the model's surface. This representation provides a foundation for efficient haptic interaction without compromising the visual complexity of the scene. Furthermore, the data structure provides a basis for interactive local editing of a model's color and geometry using the haptic interface.
    [Show full text]
  • Applications of Pixel Textures in Visualization and Realistic Image Synthesis
    Applications of Pixel Textures in Visualization and Realistic Image Synthesis Wolfgang Heidrich, Rudiger¨ Westermann, Hans-Peter Seidel, Thomas Ertl Computer Graphics Group University of Erlangen fheidrich,wester,seidel,[email protected] Abstract which can be used for volume rendering, and the imaging subset, a set of extensions useful not only for image-processing, have been With fast 3D graphics becoming more and more available even on added in this version of the specification. Bump mapping and pro- low end platforms, the focus in developing new graphics hardware cedural shaders are only two examples for features that are likely to is beginning to shift towards higher quality rendering and addi- be implemented at some point in the future. tional functionality instead of simply higher performance imple- On this search for improved quality it is important to identify a mentations of the traditional graphics pipeline. On this search for powerful set of orthogonal building blocks to be implemented in improved quality it is important to identify a powerful set of or- hardware, which can then be flexibly combined to form new algo- thogonal features to be implemented in hardware, which can then rithms. We think that the pixel texture extension by Silicon Graph- be flexibly combined to form new algorithms. ics [9, 12] is a building block that can be useful for many applica- Pixel textures are an OpenGL extension by Silicon Graphics that tions, especially when combined with the imaging subset. fits into this category. In this paper, we demonstrate the benefits of In this paper, we use pixel textures to implement four different this extension by presenting several different algorithms exploiting algorithms for applications from visualization and realistic image its functionality to achieve high quality, high performance solutions synthesis: fast line integral convolution (Section 3), shadow map- for a variety of different applications from scientific visualization ping (Section 4), realistic fog models (Section 5), and finally en- and realistic image synthesis.
    [Show full text]
  • Non-Photorealistic Rendering: a Critical Examination and Proposed System by Simon Schofield B.A. M.A. Being a Thesis Submitted I
    untitled.html 14.01.2003 11:29 Uhr Non-photorealistic Rendering: A critical examination and proposed system by Simon Schofield B.A. M.A. being a thesis submitted in support of the degree of Doctor of Philosophy, School of Art and Design, Middlesex University, October 1993 Acknowledgements I would like to thank the following people and organisations for making this investigation both possible and rewarding. From Middlesex University, those members of CASCAAD, who gave me help and programming advice in the early days and to Professor John Lansdown and Dr. Gregg Moore for their advice, enthusiasm and encouragement throughout the project. Noble Campion Ltd who provided generous sponsorship while at Middlesex. Members of the Martin Centre, University of Cambridge, particularly Paul Richens, John Rees and Tim Wiegand, who's expertise and patient help was indispensable. Informatix Inc (Tokyo) for providing generous funding for the establishment of the Martin Centre CADLab. Many architectural practices who have contributed their opinions, enthusiasm and models, especially Miller*Hare (John Hare and Steve Miller), Nicholas Ray Associates (Nick Ray), Sir Norman Foster and Partners (Caroline Brown), Scott Brownrigg and Turner (Roger Mathews). Declaration of Originality The material presented in this thesis is completely my own work carried out at CASCAAD, Middlesex University and at the Martin Centre CADLab, University of Cambridge. Where ever secondary material has been used by me, either published or unpublished, full references and acknowledgements are given. Simon Schofield 1993 Summary of Programme In the first part of the program the emergent field of Non-Photorealistic Rendering is explored from a cultural perspective.
    [Show full text]
  • Bibliography
    132 Bibliography [1] Kurt Akeley. Realityengine graphics. In SIGGRAPH '93, pages 109±116, 1993. [2] Ali Azarbayejani and Alex Pentland. Recursive estimation of motion, structure, and focal length. IEEE Trans. Pattern Anal. Machine Intell., 17(6):562±575, June 1995. [3] H. H. Baker and T. O. Binford. Depth from edge and intensity based stereo. In Proceedings of the Seventh IJCAI, Vancouver, BC, pages 631±636, 1981. [4] Shawn Becker and V. Michael Bove Jr. Semiautomatic 3-d model extraction from uncalibrated 2-d camera views. In SPIE Symposium on Electronic Imaging: Science and Technology,Feb 1995. [5] P. Besl. Active optical imaging sensors. In J. Sanz, editor, Advances in Machine Vision: Ar- chitectures and Applications. Springer Verlag, 1989. [6] A. Blake and A. Zisserman. Visual Reconstruction. MIT Press, Cambridge, MA, 1987. [7] Brian Curless and Marc Levoy. A volumetric method for building complex models from range images. In SIGGRAPH '96, pages 303±312, 1996. 133 [8] Paul Debevec. The chevette project. Image-based modeling of a 1980 Chevette from silhouette contours performed in summer 1991. [9] Paul E. Debevec, Camillo J. Taylor, and Jitendra Malik. Modeling and rendering architecture from photographs: A hybrid geometry- and image-based approach. In SIGGRAPH '96, pages 11±20, August 1996. [10] D.J.Fleet, A.D.Jepson, and M.R.M. Jenkin. Phase-based disparity measurement. CVGIP: Im- age Understanding, 53(2):198±210, 1991. [11] O.D. Faugeras, Q.-T. Luong, and S.J. Maybank. Camera self-calibration: theory and experi- ments. In European Conference on Computer Vision, pages 321±34, 1992.
    [Show full text]
  • Applications of Pixel Textures in Visualization and Realistic Image Synthesis
    Applications of Pixel Textures in Visualization and Realistic Image Synthesis Wolfgang Heidrich, Rudiger¨ Westermann, Hans-Peter Seidel, Thomas Ertl Computer Graphics Group University of Erlangen heidrich,wester,seidel,ertl ¡ @informatik.uni-erlangen.de Abstract which can be used for volume rendering, and the imaging subset, a set of extensions useful not only for image-processing, have been With fast 3D graphics becoming more and more available even on added in this version of the specification. Bump mapping and pro- low end platforms, the focus in developing new graphics hardware cedural shaders are only two examples for features that are likely to is beginning to shift towards higher quality rendering and addi- be implemented at some point in the future. tional functionality instead of simply higher performance imple- On this search for improved quality it is important to identify a mentations of the traditional graphics pipeline. On this search for powerful set of orthogonal building blocks to be implemented in improved quality it is important to identify a powerful set of or- hardware, which can then be flexibly combined to form new algo- thogonal features to be implemented in hardware, which can then rithms. We think that the pixel texture extension by Silicon Graph- be flexibly combined to form new algorithms. ics [9, 12] is a building block that can be useful for many applica- Pixel textures are an OpenGL extension by Silicon Graphics that tions, especially when combined with the imaging subset. fits into this category. In this paper,
    [Show full text]