DTV-TX03-US Clearqam and ATSC, Single Tuner Transmitter, Over Ethernet with Multicast Distribution
Total Page:16
File Type:pdf, Size:1020Kb
DTV-TX03-US DATA SHEET Media Management DTV-TX03-US ClearQAM and ATSC, single tuner transmitter, over Ethernet with Multicast Distribution This transmitter receives the incoming ClearQAM or ATSC signal and sends the digital TV content to the DTV Receiver located at the display. AMX TELEVISION DISTRIBUTION SYSTEM The AMX Television Distribution System is a line of Digital TV (DTV) distribution products designed to transmit digital TV content over Ethernet using a multicast enabled LAN as opposed to a separate dedicated coaxial cable for an easy-to- implement digital TV solution. The AMX DTV Transmitters send a complete transport stream (MPEG2) which can include multiple individual channels of live programming to an AMX DTV Receiver located at the large format display. When used with an AMX NetLinx Controller, the AMX Television Distribution System can also send control information over the Ethernet network allowing the ability to centrally manage the displays such as powering them on and off. COMMON APPLICATION The AMX Television Distribution System is used to distribute TV programming throughout a building using commonly available Ethernet for distribution. It is ideal for the delivery of digital television signals around a corporate office including reception areas, lobbies and meeting rooms. It can also deliver TV signals to multiple displays simultaneously such as in stadiums, hospitals, hotels, bars and educational facilities. The AMX Television Distribution System efficiently delivers DTV programming plus provides a simple infrastructure that extends control to the display devices without the need for any additional hardware. FEATURES • Allows control, power and digital TV over one twisted pair cable, eliminating the need for coaxial cable runs and allowing the use of existing Ethernet infrastructure DTV-TX03-US DATA SHEET DTV-TX03-US (FG1410-03) • IR and Serial control at the receiver location allows for NetLinx control of the display (channel, volume and power on/off) and a handheld IR remote can be used to access the Electronic Programming Guide and change channels • Includes administrative software which allows for selection of which incoming channels are broadcast out to the AMX DTV Receivers at the displays. The DTV-TX01-DVB-T and DTV-TX02-DVB-S Transmitters contain two tuners supporting two streams of content or up to 8 selected channels per tuner. The DTV-TX03-US Transmitter supports one stream or up to 8 selected channels • Various models support different international signal transmission types including DVB-T (Terrestrial) or DVB-S (Satellite) for countries outside North America, and ClearQAM plus ATSC for use within North America • Video is sent using a multicast method which uses less network bandwidth versus other methods • No additional encoding is required with an AMX Television Distribution System, reducing latency and delivering digital TV video faster than most • Incorporates and supports NetLinx via a Duet module which allows all system activity to be controlled by an AMX NetLinx controller. This makes it possible to completely control, schedule, or monitor the entire system including centralized powering off and on of all dis- plays to save energy • The AMX Television Distribution System is compatible with Resource Management Suite®, AMX’s innovative meeting room management, scheduling and equipment monitoring software package to facilitate centralized monitoring of remote displays to make sure they are operational • Receivers can tune into other encoded video signals at the display SPECIFICATIONS DIMENSIONS (HWD) USB CONNECTORS 1” x 10 1/2” x 4 1/4” (2.5 cm x 26.6 cm x 10.8 cm) Reserved for future implementation WEIGHT REAR PANEL COMPONENTS 1 lb (450 g) TUNER IN (RCA) POWER (RCA-to-Coax adapter required) • Input Voltage 12 VDC Accepts incoming QAM/ATSC signals. Note: Use the included RCA-to-Coax adapter • Power Dissipation 6~10 Watts on this connector. TUNERS 10/100 (RJ45) 1 internal QAM/ATSC tuner Standard 10/100 Network (RJ45) connector RF INPUT LEVEL HDMI • 950 ~ 2150 MHz Reserved for future implementation • -35 ~ -55 dBm RS232 (DB9) FRONT PANEL COMPONENTS Serial connector for local command line interface (RS232 only) STATUS LEDs POWER • Power Status LED (green) Barrel plug accepts 12 VDC power from the included power supply. Note: This • Communication Status LED (red) connector is intended to be used only with the provided power supply. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com DTV-TX03-US DATA SHEET DTV-TX03-US (FG1410-03) ENVIRONMENT • Operating Temperature: 32°F - 122°F (0°C to 50°C) • Operating Humidity: Max. relative humidity - 85% (non-condensing) CERTIFICATIONS • CE • FCC part 15 Class A INCLUDED ACCESSORIES • 12 VDC Power Supply • RCA-to-Coax connector adapter • DTV-RK-TX03 Rack-Mounting Kit (FG1410-61) 10 1/2” (26.6 cm) DTV-TX03-US (Top View) 1” 4 1/4” (2.5 cm) (10.8 cm) DTV-TX03-US DTV-TX03-US DTV-TX03-US (Back View) (Left View) (Front View) 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • 469.624.8000 • +1.469.624.7400 • 469.624.7153 fax • www.amx.com.