SDI DA and NTSC, PAL, GBR, YPbPr, YC Monitoring VSM-3901

DESCRIPTION FEATURES

The VSM-3901 serial distribution amplifier offers composite and/or component monitoring 10-bit signal processing path outputs with reclocked and equalized copies of the input signal. This module, as is the case Up to 6 re-clocked equalized 4:2:2 serial outputs with all modules in the NEO family, can be controlled locally via a front-edge display or by Up to 4 NTSC/PAL-B analog composite color outputs or 1 remote communications allowing for remote control, monitoring and diagnostics using component (GBR / Y, Pb, Pr / YC) hardware control panels and/or a GUI. Ideal for monitoring serial component signals in composite USER CONTROL VARIABLES or/and component analog monitors Standard Auto / NTSC / PAL Standard mode select (525 or 625) vertical blanking pass/ Force Standard NTSC/PAL Mode delete, chroma on/off, setup on/off, burst on/off and Setting Default / User chroma filter bandwidth select Matrix Y, Pb, Pr / GBR / YC Input standard manual/auto detect supporting NTSC/PAL-B GBR Sync On / Off Offering input signal indicators/alarms of: input standard, V Blanking Type Blanked error detection and power regulation Transparent Adjust Vblank Chroma On / Off Ideal for monitoring serial component signals in composite Chrominance On / Off and/or component analog monitors Setup On / Off Encoded outputs suitable for dubbing (10-bits) Burst On / Off Command Control System (CCS) Enabled CFID Enable/Disable Intelligent settings recovery system Color Bar Off / On Composite Gain, DC Offset Filters Extended, LP NTSC, LP PAL, Notch NTSC, Notch PAL CIF, QCIF Component Gain, Y level, Pb, Pr level Filters Chroma 3MHz, 2MHz, 1.3MHz, 1.0MHz, 0.65MHz, CIF, QCIF DC level Y/G, Pb/B/Y, Pr/R/C Color Bars On / Off Close Captioned No Data / Odd / Even / Both

OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8 OUT9 INPUT CPST/ CPST/ CPST/

SDI/CPST SDI/CFID SDI SDI SDI SDI SDI VSM-3901 Pr/R/C Pb/B/Y Y/G

NEO SDI DA and NTSC, PAL, GBR, YPbPr, YC Monitoring VSM-3901

SPECIFICATIONS Specifications and designs are subject to change without notice.

Power Consumption <10W COMPOSITE ANALOG OUTPUTS Standard NTSC, PAL-B SERIAL INPUT Number of Outputs 4 BNC (jumper switchable) Standard 4:2:2 serial component Signal Level 1V p-p nominal (+/- 1dB adjustable) Connector BNC per IEC 169-8 DC Offset 0V +/- 100mV Impedance 75 Ohm Impedance 75 Ohm Return Loss > 18dB from 5MHz to 270MHz Return Loss >40 dB to 5 MHz Signal Level 800 mVpp +/- 10% Output Quantizing 10 bits (encoding inputs 10 bits) Max. Input Cable Length > 250m (820 ft.) Frequency Response < +/- 0.2 dB to 5MHz Equalization Automatic up to 26dB, 259M-C Differential Gain < 1.5 % Standard Detection Time 1second Differential Phase < 1.2 % Common Mode Rejection (30Vp-p up to 60Hz) K2T < 1.0 % Chroma/ Luma Delay < 10ns CFID INPUT Chroma/ Luma Gain < 2% Input range 1V p-p to 4Vp-p Signal to noise >60dB RMS to 5MHz Connector BNC per IEC169-8 Impedance 75 Ohm COMPONENT ANALOG OUTPUTS Return loss >40dB to 5MHz Number of CAV outputs 1 of GBR or YPbPr or YC Impedance 75 Ohm SERIAL OUTPUTS Y Signal Level 700mV or 714 mV (switchable, +/- 1dB adjustable) Number of Outputs 4 BNC + 2 BNC (jumper switchable) Pb, Pr Signal Level 934mV (Betacam) or 700mV (SMPTE) or 648mV (MII) Connector BNC per IEC 169-8 DC Offset 0V +/- 20mV adjustable Overshoot < 10 % (all outputs terminated) Return Loss >40dB to 5 MHz Impedance 75 Ohm Output Quantizing 10 bits (encoding inputs 10 bits) Return Loss >18 dB to clock frequency Delay 4.36us Signal Level 800 mVpp +/- 10% Test Signal Color Bar - NTSC (100/7.5/75/7.5) Jitter < 350ps PAL (100/0/75/0)

ORDERING INFORMATION For more information visit www.leitch.com

VSM-3901 SDI Monitoring Distribution Amplifier, Analog Composite and Component out, NTSC/PAL See the CCS (Command Control System™) section of the catalog for detailed explanations of applications and remote control panels applicable to the NEO product line. Leitch's CCS offers applications such as Pilot™ that provide the tools you need to configure, control, monitor, diagnose, and provide secure access to the equipment on your network regardless of your network topology.

NEO