DOCSLIB.ORG

High Performance Mud Logging Package

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
High Performance Mud Logging Package High Performance Mud Logging Package Accurate data increases reserve adds and optimizes production Technology Innovation drives efficiencies in a low cost environment David Tonner © 2015 Diversified Well Logging LLC. ALL RIGHTS RESERVED. TERMS AND CONDITIONS OF USE: BY ACCEPTING THIS DOCUMENT, THE RECIPIENT AGREES THAT THE DOCUMENT TOGETHER WITH ALL INFORMATION INCLUDED THEREIN IS THE CONFIDENTIAL AND PROPRIETARY PROPERTY OF DIVERSIFIED WELL LOGGING LLC. (DIVERSIFIED) AND INCLUDES VALUABLE TRADE SECRETS AND/OR PROPRIETARY INFORMATION OF DIVERSIFIED. DIVERSIFIED RETAINS ALL RIGHTS UNDER COPYRIGHT LAWS AND TRADE SECRET LAWS OF THE UNITED STATES OF AMERICA AND OTHER COUNTRIES. THE RECIPIENT FURTHER AGREES THAT THE DOCUMENT MAY NOT BE DISTRIBUTED, TRANSMITTED, COPIED OR REPRODUCED IN WHOLE OR IN PART BY ANY MEANS, ELECTRONIC, MECHANICAL, OR OTHERWISE, WITHOUT THE EXPRESS PRIOR WRITTEN CONSENT OF DIVERSIFIED. © 2018 Diversified Well Logging LLC. CompanyConfidential Information Geochemistry Services Diversified knows that rocks and XRF / XRD hydrocarbon gases matter: • Geosteering • Geostopping • Optimizing Completions We a vast knowledge of mudlogging operations and laboratory equipment and bring it to the TOC wellsite. • HC Generating Potential Can be used alone of as part of your complete laboratory program. DWL’s Geochemistry services offer Mass Spec and Constant Volume critical time sensitive information for Extraction unconventional and conventional •Fluid Typing wells. •Fluid contacts •Compartmentalization / pathways •Rel K / natural fractures Geochemistry Services XRF Spectro Scout Best Portable Example bench top on the market Deliverable Geochemical log Experienced Field Personnel with world class Interpretation expertize Geochemistry Services LECO TOC Example Well Total Organic Carbon (TOC) measurement of carbon content present in well cuttings samples. Samples are combusted using the Leco C744 the latest and most advanced carbon determinator for oil and gas applications. The concentration of organic material in source rocks as represented by the weight percent of organic carbon. Samples are powdered, weighed, for two tests TC measures both inorganic and organic carbon, the TOC sample is chemically treated prior to analysis to remove the inorganic carbon (carbonate) from the rock. For both tests the sample is combusted in the presence of excess oxygen, allowing carbon dioxide to form from the free (organic) carbon in the rock. The amount of carbon dioxide is directly proportional to the amount of carbon in the rock. The two tests yield Total Carbon (wt%) and Total Organic Carbon (wt%) from these carbonate (wt%) can be calculated. Improves well placement, drilling and completions • Best in Class measurements • Rigorous Calibrations against standards are run on The DWL Difference a regular basis • World Class Interpretation expertise • Experienced staff with over 60 years combined experience • Experience of staff brings real time relevancy to the data • Mudlogging and geochemical labs background fused to bring optimized service • Integration with ARM for high resolution rock collection • Automated Remote Mudlogger can automatically collect samples at high frequency Traditional Sample Collection & Analysis Typical MudLog The Mudlogging Geologist Will then make a visual inspection of the Sample under a microscope and make An estimation of the % of each lithology present Samples are bagged, labeled, shipped then Mudlogging Geologist/ Sample Catcher stored Collects the sample from the Shale Shaker And conducts some preliminary sieving and cleaning HS & E Risk One of the key risks Associated with mudlogging Is slips trips & falls. The repetitive nature of Collecting the samples manually, presents a significant risk. The ROP Challenge 600 Manual Sampling • Higher resolution rock Frequency at 240 collection and record ft. / hr. and one • Improved stratigraphic sample every 20 correlation minutes – 80 ft • Improved resolution understanding of geo- mechanical properties • Assistance with picking landing zones ARM Sampling • Improved wellbore Frequency at 240 ft. containment / hr. and one • Optimized sample every 1 Completions minute – 4 ft resolution Qualitative Sample Analysis The visual inspection and estimation Of the rock composition is qualitative And can vary from logger to logger, day Shift to night shift, well to well. Automated Remote Mudlogging Device • ARM* = AUTOMATION • Industry only fully automated sample collection device • Sampling triggered by lag calculation via WITS • Stores up to hold up to 350 samples for later retrieval • Real time access for process control and images * Patent Granted ARM – Automated Remote Mud Logging – What is it? Aggregate Sample Extraction ARM Board NEMA 4 Explosion Sampling Points Proof Housing ARM – Automated Remote Mud Logging Industrial Seal wrap Sample Collection device UV Light High Resolution Digital Microscope Sample Intake House 635um Mesh Sample Collection Reel 350 Samples/ Reel Return Flow to pits Water/Diesel Intake Lines 2.25GPM 5 Minutes to Change Reel WITS Fed Depth drives Drum and Internal DAQ Calculates LAG Realtime & Post Well Sample Evaluation Dual Resolution Images UV light for fluorescence Each sample is labeled and stored for further analysis XRF Measurements on Drill Cuttings Sample Quality Depth Control • Are the cuttings on depth? • Do they represent the interval drilled? • Elemental GR (U+K+Th) vs MWD GR Redox Elements Proxy for TOC No H2S +H2S XRF Run on ARM collected samples Compared to High Resolution XRF on a core Green lines are XRF measurement taken on this cored section Excellent showing very Correlation strong Between agreement Trace with ARM Metals Ni collected and TOC. samples Discrepancy analyzed with with V shows XRF. need for basin specific ARM samples calibration. collected at 5- 10 ft Intervals. Integrated Automated Mud Log •Real-time viewing of images •(remote Co. Geologist, Co. Man, Mud Logger •High frequency samples at high ROP’s •Accurate samples of interval drilled •10-30 grams per sample •26 wells completed in total •Reduced personnel onsite •Reduced exposure to hazards / risks •Weather agnostic © 2018 Diversified Well Logging LLC. Company Confidential Information XRF used to Identify Kick off point for lateral DWL XRF Elements Geochemical Log RT Geochemical XRF Applications measurements • Pick Landing zones • Geostop • EGR vs MWD • Geosteer GR • Pick Casing Points • Modelled • Identify Cavings Mineralogy • Pick Well TD • TOC Proxies • Optimize Completions • Stratigraphic Zonation Target Zone for Landing Lateral Geosteering with XRF and GR Application : Optimize Frac-stages for “Engineered Completions” designs Eagleford Lateral Well Chemostratigraphy , Mineralogy, Brittleness, & TOC Derived from Cuttings-Based Elemental Data Austin Eagle Ford From Tonner et al. 2012 17 Potential for Personnel Reduction Lower cost lower HSE risk Service Efficiency Evolution ML Sample Catchers • Remote ML • Geo-steering • Remote DD / Survey Management / Anti-Collision Monitoring 24/7 RTOC 2D Geosteering Instant Visual of Pertinent Data Bed Dip,Dip Direction Quick MWD Data TVD to Important Targets/Tops Well Bore Positionvs. You Overview Target Every Correlation Quick LWD Data Written Remarks Our Contact Info © 2015 Diversified Well Logging LLC. CompanyConfidential 12/03/2015 16 Information DWL Geosteering Look ahead of the Bit Steering Cloud based real time web application for GMXsteering integrated GR/XRF and Geo-mechanical Properties Completion Optimization While Drilling (COWD) Geometric Completion Design Problem Stage no. 2 based on Shmin heterogeneity.
Load more

Recommended publications
  • GW-MLE Mud Logging Equipment
    GW-MLE Mud Logging Equipment Science & Technology Management Department, CNPC 2015 CHINA NATIONAL PETROLEUM CORPORATION GW-MLE Mud Logging Equipment: “Penetrating Eyesight” of Petroleum Drilling! Contents 1 Introduction 3 2 Characteristic Technologies 6 3 Typical Cases 15 4 Scientific Research Equipment 18 5 Qualification Standards 20 6 Expert Team 22 China National Petroleum Corporation (CNPC) CNPC was ranked 3th among the world’s largest is a state-authorized investment agency and a 50 oil companies and 4th in Fortune Global 500 in state holding company. On July 1998, with the 2014. implementation of the Institutional reform of the CNPC strictly follows by the combined strategies State Council, CNPC was reorgnized to become of increasing resource capacity, expanding market an integrated oil company of cross-regions, cross- shares and consolidating the international role, and industries and cross-countries, it adopts modern persists in regarding technical innovation as a key enterprise system to realize the integrations of framework to advance technological progress. To upstream and downstream operations, internal and develop its core businesses, focuses will be placed external trade, production and marketing. CNPC’s on the solutions of key bottleneck technologies business covers six main sectors: oil and gas and key proprietary technologies. Thanks to operations, petroleum engineering service, petroleum continuously improving of the technical innovation engineering construction, petroleum equipment system, optimizing the configuration of technological manufacturing, financial services and new energy resources and strengthening the construction of development. In 2014 CNPC produced 113.67 million strong talent teams, CNPC’s technological creativity tons of crude oil and 95.46 billion cubic meters of has been considerably upgraded.
    [Show full text]
  • 2767738 Automation Provides Unique Insights of the Rock Record And
    ID: - 2767738 Automation Provides Unique Insights of The Rock Record and Subsurface Through the Delivery of a Robotic Sample Collection and Analysis Device David Tonner, Diversified Well Logging, Houston TX, USA, Aaron Swanson, Diversified Well Logging, Houston TX, USA, Ron Hollingshead, Diversified Well Logging Houston TX, USA, Simon Hughes, Diversified Well Logging Houston TX, USA , Stephen Seacrest, PetroLegacy Energy Austin TX, USA, Bret McDaniel PetroLegacy Energy Austin TX, USA ABSTRACT Abstract Objectives/Scope: From the very early days of oil and gas exploration, appraisal and development drilling, samples have been collected at the rig by mud logging personnel to conduct a preliminary geological analysis of the rock being drilled. This collection typically involves a sample collection recipient, board or bucket to collect a sample of rock over the desired interval. The sample is then sieved and cleaned in the appropriate way depending on the type of drilling fluid being used. As penetration rates have increased in some instances to more than 400 ft. / hr. the sample resolution has deteriorated exponentially. From an ergonomics perspective, the highest frequency to which a person onsite can collect a sample is once every 20 minutes. At 300 ft. / hr. this translates to 100 ft. of drilled rock. A new device has been developed and deployed which automates this manual process and thus ensures faster and more accurate collection of geological samples of the drilled rock interval. Sample resolutions of 5ft rock intervals have been attained at 400 ft./ hr. This technology has provided an important technological breakthrough and enables reduction of personnel at the rig site with a subsequent reduction in cost and HSE risk, particularly in areas of H2S.
    [Show full text]
  • Common Practice of Formation Evaluation Program in Geothermal Drilling
    PROCEEDINGS, 46th Workshop on Geothermal Reservoir Engineering Stanford University, Stanford, California, February 15-17, 2021 SGP-TR-218 Common Practice of Formation Evaluation Program in Geothermal Drilling Vicky R. Chandra1, Ribka F. Asokawati2, Dorman P. Purba3 1PT Geo Dipa Energi, Jl. Warung Buncit Raya No.75, Jakarta, Indonesia 2PT Rigsis Energi Indonesia, Equity Tower, 49th Floor, Jl. Jend. Sudirman, Jakarta, Indonesia 3PT Enerka Bhumi Pratama, Kawasan Komersial Cilandak Gudang 410, Jakarta Selatan 12560, Indonesia [email protected] Keywords: technique, petrography, xrd, methylene blue, formation evaluation, cutting, coring, pressure, temperature, spinner, rock pH, borehole image, drilling, mudlogging, geothermal ABSTRACT Formation evaluation program in drilling operation, particularly geothermal drilling, is very much determined by the purpose and objective of drilling itself. During early exploration phase, the formation evaluation program is carried out by collecting as much subsurface information as possible. This was applied because of available subsurface data to support the development geothermal project are very limited. On the other hand, the program is very influenced and directly involve to the drilling operation that might risks the drilling operation, in term of well stability and well cost perspective. Thus, the effective and efficient techniques are highly required in the making of proper formation evaluation program. The main purpose of formation evaluation is to get a better understanding of subsurface geology and developed geothermal system so the best future strategy of field development can be determined. By doing this evaluation while drilling, it will give an advantage to the drilling operation itself. Knowledge of the real-time drilled formation, in term of its behavior, characteristic, and composition, will help the improvement of drilling performance and increase the well success ratio.
    [Show full text]
  • Geosteering Improves Bakken Results
    JANUARY 2012 The “Better Business” Publication Serving the Exploration / Drilling / Production Industry Geosteering Improves Bakken Results By Kevin O’Connell, NPE is drilling and developing two blocks, in Divide, Williams and McKenzie coun- David Skari, aggregating approximately 50,000 net acres ties. Wells are being drilled to target zones Aaron J. Wheeler in the heart of the Bakken Shale in Divide, located between 9,000 and 11,000 feet and Allan Rennie Williams, Dunn and McKenzie counties, true vertical depth. The horizontal pro- N.D. (Figure 1). Led by a highly experienced, ducing sections of the wells average 8,000 DENVER–Developing tight oil and technologically focused management team, feet of lateral, which is cased, perforated gas-bearing formations often requires a the company prides itself on customizing its and fractured in multiple stages. The two dense pattern of wells with long lateral drilling and completion methods to the primary intervals targeted within the oil sections. To produce such fields econom- unique geological and geophysical charac- reservoir are a clean dolomite member of ically, producing sections of wells must teristics of its core project blocks. the Three Forks formation and a 15-foot be positioned accurately within the targeted zone below a tight limestone within the Drilling History intervals, while drilling costs are kept to Bakken Middle Member. a minimum. Since early in 2010, Ensign Rigs Nos. Initially, the horizontal production wells A cost-effective solution has been de- 89 and 118 have been working for NPE required drilling a vertical pilot hole that veloped that includes predrill modeling was sidetracked, deviated from vertical of logging-while-drilling measurements FIGURE 1 to build the curve, then drilled laterally along the trajectory of a planned well to North Plains Energy LLC Area of within the producing zone.
    [Show full text]
  • ADIKAVI NANNAYA UNIVERSITY :: RAJAHMAHENDRAVARAM Syllabus (2020-21)
    ADIKAVI NANNAYA UNIVERSITY :: RAJAHMAHENDRAVARAM Syllabus (2020-21) ADIKAVI NANNAYA UNIVERSITY RAJAHMAHENDRAVARAM Syllabus for Mudlogging (PG Diploma – 1 year) (2020-21 AB onwards) Department of Geology University college of Science & Technology Adikavi Nannaya University Rajahmahendravaram – 533 296, A.P., PG DIPLOMA MUD LOGGING (20-21) Page 1 of 17 ADIKAVI NANNAYA UNIVERSITY :: RAJAHMAHENDRAVARAM Syllabus (2020-21) Minutes of Board of Studies in Geology Held on 21.12.20, at 4 PM Through on-line meeting As the University Grants Commission has given permission to offer PG Diploma in Mudlogging under NSQF, the Board of studies in geology has been convened to prepare the course structure and syllabi. Agenda: Preparation of Syllabi for Mudlogging program Members Prof. Y. Srinivasa Rao, Chairman Dr. KN Ratnam, Head of the Department Prof. KSN Reddy, Andhra University Dr. K. Ratnakar, Nagarjuna Univ., Sri PVV Satyanarayana, GM-Area Manager, ONGC (Representing Sri. Vadiraj, Forward Basin Manager) Dr. V. Balaram, former-CSIR Scientist, NGRI Dr. KV Swamy, AKNU Dr.KS Peter, AKNU Dr. G. Apparao, AKNU D. Teja, AKNU Resolutions: 1. After having detailed discussion, the committee has resolved and approved the proposed course structure and syllabi. 2. The regulations for examination and evaluation will be as PG Science program of the university 3. In the first semester, field work on geological mapping and report and second semester, institutional/industrial or case-study review based project work, report preparation and presentation will be conducted. PG DIPLOMA MUD LOGGING (20-21) Page 2 of 17 ADIKAVI NANNAYA UNIVERSITY :: RAJAHMAHENDRAVARAM Syllabus (2020-21) PG Diploma in MUD LOGGING AIM OF THE COURSE The course provides the students with the basic skills and techniques needed to analyse and interpret the mudlogging data in the hydrocarbon exploration and development activities.
    [Show full text]
  • Mud Logging – Rapid Analyses of Well Gases with an Agilent Micro GC
    Mud Logging – Rapid Analyses of Well Gases with an Agilent Micro GC Application Note Oil and Gas Exploration, Mud Logging Author Remko van Loon Agilent Technologies, Inc. Abstract Oil and gas exploration operations require the analysis of dissolved natural gas in samples from the well within short run times. This application note addresses the use of an Agilent Micro GC for rapid, accurate mud logging analysis. Analytical test - ing of drilling fluid sample using the Agilent Micro GC has proven to be an excellent technique for analyzing individual hydrocarbon gases to assist with lithology reports for the mud logging field. The instrument's small form factor and low consumption of operating gas provides an ideal solution to incorporate into drilling operations. Introduction Table 1. Instrument Conditions Instrument Agilent 490 Micro GC Mud logging, or hydrocarbon well logging, is the process by which well owners obtain information about the lithology and Channel 1 fluid content of their well. In this process, small pieces of rock Column Agilent PoraPLOT Q , 10 m or other sediment and the mud that surround it are brought to Column temperature 60 °C the surface of a borehole by drilling. The sediment and mud Column pressure 240 kPa, helium are analyzed to provide a detailed description of the borehole. Channel 2 Hydrocarbon exploration operations requires the determina - Column Agilent PoraPLOT Q , 4 m tion of natural gas in the well, which is critical information Column temperature 150 °C when making decisions on additional drilling or production. Column pressure 120 kPa, helium Gas detection for this purpose is typically performed in a mobile lab, located near the drill site.
    [Show full text]
  • What Causes Mudlogging Mud Gas Response to Vary? William S
    AADE-19-NTCE-050 What Causes Mudlogging Mud Gas Response to Vary? William S. Donovan, Donovan Brothers Incorporated and Automated Mudlogging Systems Copyright 2019, AADE This paper was prepared for presentation at the 2019 AADE National Technical Conference, and Exhibition held at the Hilton Denver City Center, Denver, Colorado, April 9-10, 2019. This conference is sponsored by the American Association of Drilling Engineers. The information presented in this paper does not reflect any position, claim or endorsement made or implied by the American Association of Drilling Engineers, their officers or members. Questions concerning the content of this paper should be directed to the individual(s) listed as author(s) of this work. Abstract A mudlog is typically presented in a measured depth format: Mudlogging has been used to determine over-pressured drilling rate (ROP), total gas as measured in the mudlogging zones, balanced mud weight, and gas in the formations while unit, its gas constituents, drill cuttings lithology, the presence drilling, but the mud gas response varies widely, and the causes of oil in the cuttings, and cuttings fluorescence. These are poorly understood. It is not uncommon to see as much as a measurements and information are gathered periodically on the ten-fold variation in mud gas response while drilling formations drilling rig. that have similar logs. Also, cumulative production has a poor Drilling parameters – or their proxies, such as string weight, correlation with mudlogging mud gas response in horizontal weight on bit, block height, drillstring length, pump strokes, wells. Mudlogging can be improved and more effective if we pump capacity per stroke, pump pressure, mud motor rotation, understand and account for the mud gas variations.
    [Show full text]
  • Real-Time Drilling Mud Gas Monitoring for Qualitative Evaluation of Hydrocarbon Gas Composition During Deep Sea Drilling in the Nankai Trough Kumano Basin
    Originally published as: Hammerschmidt, S. B., Wiersberg, T., Heuer, V. B., Wendt, J., Erzinger, J., Kopf, A. (2014): Real-time drilling mud gas monitoring for qualitative evaluation of hydrocarbon gas composition during deep sea drilling in the Nankai Trough Kumano Basin. - Geochemical Transactions, 15, 1. DOI: http://doi.org/10.1186/s12932-014-0015-8 Hammerschmidt et al. Geochemical Transactions (2014) 15:15 DOI 10.1186/s12932-014-0015-8 RESEARCH ARTICLE Open Access Real-time drilling mud gas monitoring for qualitative evaluation of hydrocarbon gas composition during deep sea drilling in the Nankai Trough Kumano Basin Sebastian B Hammerschmidt1*†, Thomas Wiersberg2†, Verena B Heuer1†, Jenny Wendt1†, Jörg Erzinger2† and Achim Kopf1† Abstract Background: Integrated Ocean Drilling Program Expedition 338 was the second scientific expedition with D/V Chikyu during which riser drilling was conducted as part of the Nankai Trough Seismogenic Zone Experiment. Riser drilling enabled sampling and real-time monitoring of drilling mud gas with an onboard scientific drilling mud gas monitoring system (“SciGas”). A second, independent system was provided by Geoservices, a commercial mud logging service. Both systems allowed the determination of (non-) hydrocarbon gas, while the SciGas system also 13 monitored the methane carbon isotope ratio (δ CCH4). The hydrocarbon gas composition was predominated by 13 methane (> 1%), while ethane and propane were up to two orders of magnitude lower. δ CCH4 values suggested an onset of thermogenic gas not earlier than 1600 meter below seafloor. This study aims on evaluating the onboard data and subsequent geological interpretations by conducting shorebased analyses of drilling mud gas samples.
    [Show full text]
  • Oilfield Review
    The Expanding Role of Mud Logging Peter Ablard For decades, samples and measurements obtained at the surface have provided mud Chris Bell Chevron North Sea Limited loggers with insights into conditions at the bit face. Information captured through Aberdeen, Scotland mud logging gave operators early indications of reservoir potential and even warned David Cook of impending formation pressure problems. New sampling and analysis techniques, Ivan Fornasier Jean-Pierre Poyet along with advances in surface sensor design and monitoring, are bringing the Sachin Sharma science of mud logging into the 21st century. Roissy-en-France, France Kevin Fielding Laura Lawton Hess Services UK Limited The mud logging unit has long been a common against deployment of wireline logging tools. In London, England wellsite fixture. First introduced commercially in such wells, analysis of mud gas and cuttings often 1939, these mobile laboratories carried little provided the first, and perhaps only, indication George Haines more than a coffee pot, a microscope for examin- that a formation might be productive. Today, Houston, Texas, USA ing formation cuttings and a hotwire sensor for although LWD technology is able to give the first detecting the amount of hydrocarbon gas encoun- glimpses of near-bit conditions in real time, Mark A. Herkommer tered while drilling. The mud logger’s job was to adverse wellbore conditions sometimes preclude Conroe, Texas record the depth and describe the lithology of the use of downhole logging tools. In such cases, formations that the drill bit encountered, then the mud log continues to inform operators of the Kevin McCarthy determine whether those formations contained producibility of their wells.
    [Show full text]
  • How We Learned to Drill the Pressured Shale in the Gulf of Mexico
    AADE -12-FTCE-34 How We Learned to Drill the Pressurized Shale in the Gulf of Mexico: One Person’s Recollection Bill Rehm, Drilling Consultant Copyright 2012, AADE This paper was prepared for presentation at the 2012 AADE Fluids Technical Conference and Exhibition held at the Hilton Houston North Hotel, Houston, Texas, April 10-11, 2012. This conference was sponsored by the American Association of Drilling Engineers. The information presented in this paper does not reflect any position, claim or endorsement made or implied by the American Association of Drilling Engineers, their officers or members. Questions concerning the content of this paper should be directed to the individual(s) listed as author(s) of this work. ABSTRACT: ●set casing with 1.5 SpG, (12.5ppg mud) “High” pressure wells in the Gulf of Mexico ●drill ahead increasing the mud density 1ppg every in the 1950-60’s were the result of some unknown 1000 feet source and were treated with very ad-hoc solutions. ●at 12.5ppg, the drill rig went from footage to day This paper discusses the resolution of the high work pressure drilling problems in the 1960-70’s and the This worked in general, but there were a lot various people who championed the solutions that are of well bore stability problems; gas or salt water still the basis of drilling high pressure wells. kicks, slow drilling rate, and stuck drill pipe. The general program was too general but it worked better INTRODUCTION than any other program we tried. There was a lot of This is not an engineering or scientific non-productive down time trying to control salt water study, but a history of the decade in which we finally or gas flows (well kicks) and unstick drill pipe.
    [Show full text]
  • TABLE of CONTENTS Part A: Basic Well Logging
    TABLE OF CONTENTS Part A: Basic Well Logging Fundamentals of Well Logging and Well-Log Interpretation IBooks and General Review Papers IIGeneral Log Interpretation, Reservoir Characterization,Wireline Testing IIIGeneral Petrophysics Including Core Analysis, Core Imaging and Image Analysis (includes DSDP and ODP data) IVElectromagnetic Logging (Including Resistivity, NMR, and Magnetic) VMWD (Measurement While Drilling), Horizontal Wells/Drilling VICased-Hole and Production Logging,Determination of ROS. VII Acoustic Logging (Including P and S, Full Waveform, Borehole Seismic, and VSP) VIIINuclear Logging, Geochemical Logging (Elemental Analysis) IXShaly Sands (Including Thin-Bed Evaluation and Low-Contrast Pay) XBorehole Gravimetry XIPermeability and Determination of Permeability from Logs XII Borehole Imaging, Downhole Video, Nearwell and Crosswell Imaging and Tomography XIIITemperature Logging, Determination of Static BHT, Applications of BHT Data, Heat- Flow and Geothermics XIVConditions and Special Situations Affecting Tool Response XV Crossplot Techniques and Applications XVIComputer and Programmable Calculator Programs for Log Analysis XVIISchlumberger International Well Evaluation Conferences XVIIIReprint Volumes XIXBibliographies XX Well-Log-Response Charts Part B: Applications 1General Geological Applications, Mechanical Properties, Logging for Environmental Applications (includes DSDP and ODP data) 2Determination of Facies and Depositional Environment 3Identification of Depositional Environments by SP and GR Pattern, Sequence
    [Show full text]
  • Review of Well Logs and Petrophysical Approaches for Shale Gas in Sichuan Basin, China
    Send Orders for Reprints to [email protected] 316 The Open Petroleum Engineering Journal, 2015, 8, (Suppl 1: M9) 316-324 Open Access Review of Well Logs and Petrophysical Approaches for Shale Gas in Sichuan Basin, China Yuanzhong Zhang*, Sicheng Jin, Hao Jiang, Yuwei Wang and Pengyu Jia State Key Laboratory of Petroleum Resources and Prospecting, College of Geophysics and Information Engineering, China University of Petroleum, Beijing 102249, China Abstract: China has vast reserves of shale gas. Currently, shale gas is one of the focuses of the unconventional reservoir. Well logs play an import role in shale gas production, and it is the bridge connecting geology, geophysics and petroleum engineering. In the exploration stage, well logs are used to identify lithology, evaluate the parameters of mineral types and compositions, total organic carbon (TOC), porosity, permeability, gas content, and the potential resources quantity. In the development stage, well logs offer various parameters of geological and engineering for horizontal drilling and produc- tion, evaluate the mechanical properties and calculate the magnitude and orientation of the in-situ stress for hydraulic frac- turing stimulation. We reviewed current well logs for shale gas in China and discussed the development trend in the paper. A case history in Sichuan Basin presented to analyze the logs response characteristics and parameters calculation for a shale gas well. The difficulty and the future attention focus are also discussed. Keywords: China, shale gas, Sichuan Basin, unconventional reservoir, well logs. 1. INTRODUCTION until shale gas is regarded as a kind of the unconventional gas resources to develop. Gas-bearing shale with fracture has Shale is widespread, collectively termed a whole family characteristics of low porosity and low permeability, and the of marine or lake sedimentary rock from claystone to slate, logs response is also complicated.
    [Show full text]