Program for 13Th European Conference On

Total Page:16

File Type:pdf, Size:1020Kb

Program for 13Th European Conference On Program for 13th European Conference on Antennas and Propagation (EUCAP 2019) Oral Oral Poster Poster Poster Oral Sessions: S1 Oral Sessions: S2 – Oral Sessions: Oral Sessions: S3- Oral Sessions: Oral Sessions: Sessions: Oral Sessions: S4- Oral Sessions: G1- Oral Sessions: G2- Oral Sessions: A2- Sessions: Sessions: Time Sessions: Sessions: P3 - Krakow Warszawa S3-A – Gdansk B - Wroclaw S4-A - Poznan S4-B - Lublin S4-C - D - Bytom Gniezno Opole Ustka A1 - P2 - P1 - Odra - Warta Kielce Gdynia Wisla Monday, April 1 09#00- Opening: Opening Session 10#00 10#00- IK_01 Mo_1: IK_01 Invited 10#40 Keynote 1 11#10- IK_02 Mo_2&3: IK_02 12#30 Invited Keynote 2&3 CS10 Snowpack CS19 COST CA15104 CS48 mm-Wave CS44 Propagat in monitoring: CS10 (IRACON): BAN: CS19 COST GAP Wave Techn: 14#00- Rem Sensing: CS44 Microwave techniques, modelling, CS24 Arrays for 5G: CS24 session CA15104 (IRACON): CS48 Integration and New 18#30 Propagation Aspects in CS29 Small systems, and antennas for Antenna Arrays for 5G and Beyond Measurements and Simulations in CS27 COST session CA17115 Applications of mm-Wave GAP CS36 Prop Ch CS12 Reflect & CS22 Reconf Ant: CS14 Periodic Remote Sensing Antenna snowpack monitoring and snow- Channel Modelling in Wireless Body (MyWAVE): CS27 COST session Wave Technology Veh-to-X: CS36 Transmitarray: CS12 CS22 Reconfigurable Structures Higher Design: CS29 related applications Area Network CA17115 (MyWAVE): Advancements in Propagation Channels for Reflectarray and Transmitarray Antennas for Compact Symm: CS14 Periodic Structures CS17 Ground Small Antenna Electromagnetic Hyperthermic Technologies CS21 IET/AMTA: 5G Wide-Sense Vehicle-to-X Antennas for Emerging Applications Devices with Higher Symmetries Terminal Sat Designing Methods and Dielectric and Thermal properties of and Beyond: CS21 Communications CS46 GPR: CS46 CS32 Transformation 16#30- Comm: CS17 Ground and Measurement CS43 Array Ant Design: tissues IET/AMTA Session: Trends and Theoretical, Algorithmic, and Optics: CS32 Transformation 18#30 terminal needs and CS43 Array Antenna Design Measurement Challenges for 5G Experimental Advances in GPR Optics for Antenna Design technologies for broadband and Beyond satellite communications Tuesday, April 2 CS28 Channel MT_A01 Antenna F_M04 Anal & Proc Ant Modelling Railway R_M01 Radar C_M01 MIMO & CS13 Ant on H_A02 MM SubMM W_A02 Arrays Ant 08#40- Theory: MT_A01 Antenna Meas Data: F_M04 Effective Env 5G: CS28 Channel Scattering: R_M01 Radar OTA testing: C_M01 IoT: CS13 Antennas THz: H_A02 Millimeter, Sub- Wireless: W_A02 Arrays Antenna 12#30 theory, computational and CS1 Unconv Techn Analysis and Processing of Antenna modelling in railway Scattering Measurement and CS23 Future Space MIMO and OTA testing on IoT applications millimeter and TeraHertz Antennas for Wireless Networks numerical techniques Inv Scatt: CS1 Measurement Data environments for 5G Calibration Techniques CS26 Micr Sensors Biomed Missions: CS23 Antenna needs Unconventional techniques applications Apps: CS26 Microwave Sensors for and solutions for future Space and applications for inverse CS45 Recent Biomedical Applications CS9 Aper Array missions C_P01 Prop for R_A01 Rad adapt & scattering problems F_M01 Test ranges: C_A06 Multi Wide Adv Small H_A03 Array Ant: H_A03 W_A04 MM Submm THz: 10#50- Radio Telesc: CS9 vehicular comm: Reconf Ant: R_A01 Radar F_M01 Near-field, far-field, compact Band: C_A06 Multiband Ant: CS45 Recent Array Antennas, Antenna Systems and W_A02 Millimeter, sub-millimeter and 12#30 Antennas for Aperture Array C_P01 Propagation for adaptive and reconfigurable and RCS test ranges and wideband antennas Advances in Small Architectures TeraHertz antennas Radio Telescopes vehicular communications antennas Antennas 13#30- Poster_01: Poster_02: Poster_03: 15#00 Poster_01 Poster_02 Poster_03 15#00- Inv_01 Tue: Inv_01 Invited Inv_02 Tue: Inv_02 16#20 Session 1 Invited Session 2 CS38 Machine L_A01 CS25 CS35 Ant & Radio CS41 Advanced Ant Learning for C_A07 Ref & Adaptive CS8 Coex Wind Turb Electromagn F_A02 Slot-Guid-Leaky Channels: CS35 H_A06 MM and THz: W_A03 Array Ant: W_A03 16#50- Nanosat Apps: CS41 Applied EM: CS38 Transmit Array: Reconf: L_A01 & Radar: CS8 Recent B_A01 Wear Implant: B_A01 Quant World: Ant: F_A02 Slotted-, guided- and Assessment and modelling of H_A06 Millimeter, sub-millimeter and Array antennas, antenna systems and 18#30 Advanced Antenna Concepts for Trends and Advances in C_A07 Reflect arrays and Adaptive and Research on the Coexistence of Wearable and Implantable Antennas CS25 leaky- wave antennas antennas and radio channels TeraHertz antennas architectures Nanosatellite Applications Machine Learning for Applied transmit arrays Reconfigurable Wind Turbines and Radar Systems Electromagnetics in jointly Electromagnetics Antennas a Quantum World Wednesday, April 3 L_A02 Array C_A07 Array Ant: CS2 mmWave Mob c_A05 Arrays Ant: L_A02 Array R_A02 Slot & leaky- 08#40- C_A02 Array antennas, W_A05 WN Ant: W_A05 12#30 CS40 Characteristic CS47 ESA Multibeam App: CS2 mmWave for CS31 IET: New antenna systems and High DT: C_A05 Arrays antennas, antenna wave ant: R_A02 Slotted and CS7 IET / COST session Wireless Networks Antennas CS30 Diagnosing & treating CS47 ESA Mobile Applications CS31 architectures for High Data Transfer systems and leaky-wave antennas CS7 CS30 Diagnosing Modes: CS40 Progress in and Reconf Ant: Antenna Systems: CA15104 (IRACON): with microwaves: session: Selected papers from the IET session: New Antenna Systems architectures IET / COST session CA15104 and treating with microwaves - new findings the Application of Characteristic 39th ESA Workshop on Multibeam involving Application of CS5 Prop for L_P01 Radar (IRACON): Propagation measurements covering tissue dielectric properties, medical Mode Analysis C_A04 Cell ant: R_P20 Radar Localis: 10#50- and Reconfigurable Antennas CS42 Plasma Ant: Metamaterials and Metasurfaces UAVs: CS5 Propagation LocSens: L_P01 and modelling for 5G and beyond MT_P11 Meas techn: imaging and patient studies C_A04 Cellular R_P20 P20 Radar, localisation, and 12#30 CS42 Plasma Antennas for unmanned aerial vehicles Radar, Localisation, MT_P11 Measurement techniques communication antennas sensing (UAVs) and Sensing 13#30- Poster_04: Poster_07: Poster_05: 15#00 Poster_04 Poster_07 Poster_05 15#00- Inv_03 Wed: Inv_03 Inv_04 Wed: Inv_04 Invited 16#20 Invited Session 3 Session 4 CS16 EM Meth L_A04 Power Sp_A02 Ant F_A01 Antenna CS15 AMTA: UAV- C_P17 Propag MT_P02 Propag H_P01 Propag Direct & Inv Scatt: Transfer I: R_A03 Array Ant: R_A03 MT_M02 Ant Meas: 16#50- Arr&Systems: Sp_A02 Theory: F_A01 Antenna based Ant: CS15 AMTA Vehicul: C_P17 Exp: MT_P02 Propagation Experiment: H_P01 B_M01 Other Meas: B_M01 Other CS16 Electromagnetic methods L_A04 Wireless Power Array antennas, antenna systems MT_M02 General antenna 18#30 Antenna Arrays and Systems for theory, computational and session: UAV-based Antenna Propagation for vehicular experimental methods and Propagation Experimental Methods Measurement Topics for direct and inverse scattering Transmission and and architectures measurements Space Applications numerical techniques Measurements communications campaigns and Campaigns involving stratified media Harvesting I Thursday, April 4 MT_M01 RF mat Sp_A01 Reflect Arrays: H_A01 MIMO Smart: 08#40- char: MT_M01 R_A04 Radar ant: R_A04 F_A11 Future ant 2: F_A11 CS34 Next-gen Sp_A01 Reflect Arrays and Transmit CS39 Signal H_A01 MIMO, Diversity, Smart 12#30 CS18 AMTA: Post CS20 ISAP: Asian Techniques and tools for RF Radar antennas Future antennas 2 CS33 Horizon 2020 Comp EM: CS34 Arrays Processing for CS11 GNSS Antennas & Signal Processing Processing: CS18 Ant&Prop: CS20 ISAP material characterisation (EMERALD): CS33 Horizon 2020 Fundamental challenges and Advanced EM: CS39 Signal Ant: CS11 GNSS CS49 UWB Feed and AMTA session: Post session: Recent Advances in MT_A08 research and innovation session (EMERALD): novel methodologies in the next- Processing Techniques for Advanced antennas and antenna PAF Radio Telescopes: Processing Techniques in Asian Antennas and Metamat: MT_A08 H_A04 Meta & EBG: ElectroMagnetic imaging for a novel 10#50- generation computational Electromagnetics Synthesis, Analysis systems F_P06 Body Propag: F_A07 Future ant: F_A07 CS49 Development of UWB Feed Antenna Measurements Propagation Research Metamaterials, H_A04 Metamaterials, metasurfaces genERation of medicAL Devices 12#30 electromagnetics and Measurements F_P06 Body-area propagation Future antennas and PAF Technologies for Future metasurfaces and EBG for and EBG Radio Telescopes antennas 13#30- Poster_06: Poster_08: Poster_Awards: 15#00 Poster_06 Poster_08 Poster_Awards 15#00- Inv_05 Thu: Inv_05 Inv_06 Thu: Inv_06 Invited 16#20 Invited Session 5 Session 6 CS3 Gen MoM- F_A03 MM, Sub- CS6 AMTA: C_P03 MMWave based Eigen Probl: mm & THz Ant: F_A20 Frequency and MT_A02 Ant L_P01 Loc & H_A08 Metamat: H_A08 16#50- Sat&Aerosp Ant Meas: Propag: C_P03 F_P05 Imaging: F_P05 S_A26 3D Print Ant: S_A26 B_A02 Imag Sensing: B_A02 CS3 Generalized MoM-based F_A03 Millimeter, sub- PSS: F_A20 Frequency and Theory 2: MT_A02 Ranging: L_P01 Metamaterials, metasurfaces and EBG 18#30 CS6 AMTA session: Satellite and Millimetre-wave propagation Imaging and inverse scattering 3D-printed antenna technologies Imaging, Sensing, and Radar Antennas eigenvalue problems for millimeter and TeraHertz polarization selective surfaces Antenna Theory 2 Localization & Ranging for antennas Aerospace Antenna Measurements for wireless networks antennas and scattering antennas Friday,
Recommended publications
  • 5.1 Optical Nanostrip Antenna
    Copyright Undertaking This thesis is protected by copyright, with all rights reserved. By reading and using the thesis, the reader understands and agrees to the following terms: 1. The reader will abide by the rules and legal ordinances governing copyright regarding the use of the thesis. 2. The reader will use the thesis for the purpose of research or private study only and not for distribution or further reproduction or any other purpose. 3. The reader agrees to indemnify and hold the University harmless from and against any loss, damage, cost, liability or expenses arising from copyright infringement or unauthorized usage. IMPORTANT If you have reasons to believe that any materials in this thesis are deemed not suitable to be distributed in this form, or a copyright owner having difficulty with the material being included in our database, please contact [email protected] providing details. The Library will look into your claim and consider taking remedial action upon receipt of the written requests. Pao Yue-kong Library, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong http://www.lib.polyu.edu.hk INVENSTIGATION OF SOLAR ELECTRIC SYSTEMS BASED ON NANO RECTENNA WANG JIAJIE, IVAN Ph.D The Hong Kong Polytechnic University 2014 I II The Hong Kong Polytechnic University Department of Building Services Engineering Investigation of Solar Electric Systems Based on Nano Rectenna WANG Jiajie, Ivan A thesis submitted in partial fulfillment of the requirements for the Degree of Doctor of Philosophy September 2013 III IV CERTIFICATE OF ORIGINALITY I hereby declare that this thesis is my own work and that, to the best of my knowledge and belief, it produces no material previously published or written nor material which has been accepted for the award of any other degree or diploma, except where due acknowledgement has been made in the text.
    [Show full text]
  • "Eggbeater"Antenna Vhf/Uhf ~ Part 1
    "EGGBEATER"ANTENNA VHF/UHF ~ PART 1 ON6WG / F5VIF For the enthusiastic listeners or the licensed amateur station wishing to experiment with satellite transmissions without investing a large sum of money in rotators and tracking systems, here is a very competitive antenna. It will appeal to those with no space for large arrays, or for those who simply wish to experiment with circular polarization for terrestrial transmissions. Introduction This antenna was conceived mainly for high-speed digital transmission via satellite. Another reason was the need for a compact system due to the local environment of my station (mountainous region with high hills and obstacles too close to my station, no space to safely place rotative YAGI antennas). If the horizon is unreachable for RF signals , that leaves only the sky above us. To use the high-speed digital satellites, the level of signal reaching the TNC must be high enough to correctly decode the packets. For example, I mainly use an AEA/PK-96 TNC which requires at least 200 millivolts p-p at the input. To have this level when receiving 9600 Bd packets, there must be at least an S-3 showing on the S-Meter of my receiver. Design The antenna is made of two full waves loops , mounted at right angles to each other. Then coupled together, 90 degrees out of phase over a horizontal circular reflector. With this configuration the antenna is omni directional and circularly polarized. Changing the feeder connection from one loop to the other loop will effectively change the polarization between RHCP and LHCP.
    [Show full text]
  • Reconfigurable Plasma Antenna Array by Using Fluorescent Tube for Wi-Fi Application
    RADIOENGINEERING, VOL. 25, NO. 2, JUNE 2016 275 Reconfigurable Plasma Antenna Array by Using Fluorescent Tube for Wi-Fi Application Hajar JA’AFAR1, Mohd Tarmizi ALI 2, Ahmad Nazri DAGANG3, Idnin Pasya IBRAHIM2, Nur Aina HALILI2, Hanisah MOHD ZALI2 1Faculty of Electrical Engineering, Universiti Teknologi MARA (Terengganu), Sura Hujung 23000 Dungun, Malaysia 2Faculty of Electrical Engineering, Universiti Teknologi MARA (UiTM), 40450 Shah Alam, Selangor, Malaysia 3 School of Ocean Engineering, Universiti Malaysia Terengganu, 21030 Kuala Terengganu, Terengganu, Malaysia [email protected] Manuscript received March 19, 2016 Abstract. This paper presents a new design of reconfigura- generated by UV laser irradiation, or by laser initiated pre- ble plasma antenna array using commercial fluorescent ionization followed by high voltage break down to form tube. A round shape reconfigurable plasma antenna array the main conducting channel or by simply using commer- is proposed to collimate beam radiated by an omnidirec- cial fluorescence tube to serve as reflector, or by much tional antenna (monopole antenna) operating at 2.4 GHz more expensive electron beam [2]. There were also exotic in particular direction. The antenna design consists of methods like explosion generating plasma antenna for a monopole antenna located at the center of a circular alu- fusion research. The plasma will be present when electron minum ground. The monopole antenna is surrounded by and nucleus that form the atom is no longer able to stay a cylindrical shell of conducting plasma. The plasma shield together due to high kinetic energy. It happens due to the consists of 12 commercial fluorescent tubes aligned in electrons are stripped out from the atoms.
    [Show full text]
  • Performance and Radiation Patterns of a Reconfigurable Plasma Corner-Reflector Antenna Mohd Taufik Jusoh Tajudin, Mohamed Himdi, Franck Colombel, Olivier Lafond
    Performance and Radiation Patterns of A Reconfigurable Plasma Corner-Reflector Antenna Mohd Taufik Jusoh Tajudin, Mohamed Himdi, Franck Colombel, Olivier Lafond To cite this version: Mohd Taufik Jusoh Tajudin, Mohamed Himdi, Franck Colombel, Olivier Lafond. Performance and Radiation Patterns of A Reconfigurable Plasma Corner-Reflector Antenna. IEEE Antennas and Wireless Propagation Letters, Institute of Electrical and Electronics Engineers, 2013, pp.1. 10.1109/LAWP.2013.2281221. hal-00862667 HAL Id: hal-00862667 https://hal-univ-rennes1.archives-ouvertes.fr/hal-00862667 Submitted on 17 Sep 2013 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. 1 Performance and Radiation Patterns of A Reconfigurable Plasma Corner-Reflector Antenna Mohd Taufik Jusoh, Olivier Lafond, Franck Colombel, and Mohamed Himdi [9] and reactively controlled CRA in [10] were proposed to Abstract—A novel reconfigurable plasma corner reflector work at 2.4GHz. A mechanical approach of achieving variable antenna is proposed to better collimate the energy in forward beamwidth by changing the included angle of CRA was direction operating at 2.4GHz. Implementation of a low cost proposed in [11]. The design was simulated and measured plasma element permits beam shape to be changed electrically.
    [Show full text]
  • Analysis of Crossed Dipole to Obtain Circular Polarization Applying Characteristic Modes Techniques
    Analysis of crossed dipole to obtain circular polarization applying Characteristic Modes techniques Juan Pablo Ciafardini (1), Eva Antonino Daviu (2), Marta Cabedo Fabrés (2), Nora Mohamed Mohamed-Hicho (2), José Alberto Bava (1), Miguel Ferrando Bataller (2). (1) Dpto. de Electrotecnia. Facultad de Ingeniería, Universidad Nacional de La Plata. Calle 48 y 116 - La Plata (1900), Argentina. [email protected] (2) Instituto de Telecomunicaciones y Aplicaciones Multimedia. Edificio 8G. Planta 4ª, acceso D. Universidad Politécnica Valencia. Camino de Vera, s/n46022 Valencia. España. [email protected] Abstract— The crossed dipole is a common type of antenna developed to achieve wider bandwidth impedance compared that is used to generate circularly polarized radiation in a wide to the original design. In 1961 a new type of crossed dipole frequency range. This antenna was originally developed in the antenna, which used a single feed, was developed for 1930s and today is used in many wireless communication circular polarization radiation [5], Bolster demonstrated systems, including broadcast services, satellite theoretically and experimentally that single-feed crossed communications, mobile communications, global navigation systems satellite system (GNSS), radio frequency identification dipoles connected in parallel if the lengths of the dipoles (RFID), wireless local area networks (WLANs) and global were such that the real parts of their input admittances were interoperability for microwave access (WiMAX). equal and the phase angles of their input admittances This paper shows that it is possible to obtain circular differed by 90º. Based on these conditions, numerous polarization with two cross dipoles with different lengths and single-feed circularly polarized crossed dipole antennas connected in parallel by applying the Theory of Characteristic have been designed [5] - [25].
    [Show full text]
  • 2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI National Radio Science Meeting
    2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI National Radio Science Meeting Final Program 7–12 July 2019 Hilton Atlanta Atlanta, Georgia, U.S.A. Conference at a Glance Saturday, July 6 14:00-16:00 Strategic Planning Committee 16:15-17:15 AP-S Meetings Committee 17:15-18:15 JMC Meeting (Closed Session) 18:15-21:30 JMC Meeting, Dinner and Presentations 19:15-21:15 IEEE AP-S Constitution and Bylaws Committee Meeting & Dinner Sunday, July 7 08:00-10:00 Past Presidents’ Breakfast 10:00-18:00 AdCom Meeting 19:30-22:00 Welcome Dessert Reception at the Georgia Aquarium Monday, July 8 07:00-08:00 Amateur Radio Operators Breakfast 08:00-11:40 Technical Sessions 09:00-18:00 Technical Tour - “An Engineer’s Eye View” of the Mercedes Benz Stadium 12:00-13:20 Transactions on Antennas and Propagation Editorial Board Lunch Meeting 13:20-17:00 Technical Sessions 17:00-18:00 URSI Commission A Business Meeting 17:00-18:00 URSI Commission B Business Meeting 17:00-18:00 URSI Commissions C/E (combined) Business Meeting Tuesday, July 9 07:00-08:00 AP Magazine Staff Meeting 07:00-08:00 APS 2020 Committee Meeting 07:00-08:00 Industrial Initiatives 07:00-08:00 Membership Committee Meeting 07:00-08:00 Student Design Contest (Set-Up - Closed to Others) 07:00-08:00 Technical Committee on Antenna Measurement 08:00-11:40 Student Paper Competition 08:00-11:40 Technical Sessions 08:00-09:30 Student Design Contest (Demo for Judges - Closed to Others) 08:30-14:00 Standards Committee Meeting 09:30-12:00 Student Design Contest (Demo for Public)
    [Show full text]
  • AU0019429 PLASMA ANTENNAS: DYNAMICALLY CONFIGURABLE ANTENNAS for COMMUNICATIONS Gerard Borg, David Miljak*, Jeffrey Harris and N
    AU0019429 PLASMA ANTENNAS: DYNAMICALLY CONFIGURABLE ANTENNAS FOR COMMUNICATIONS Gerard Borg, David Miljak*, Jeffrey Harris and Noel Martin* Plasma Research Laboratory "'• Research School of Physical Sciences ".v Australian National University Canberra ACT 0200 Australia Wills Plasma Physics Department School of Physics, University of Sydney Sydney, New South Wales, 2006 Australia * Defence Science and Technology Organisation P.O. Box 1500, Salisbury, South Australia , 5108 Australia In recent years, the rapid growth in both communications and radar systems has led to a concomitant growth in the possible applications and requirements of antennas. These new requirements include compactness and conformality, rapid reconfigurability for directionality and frequency agility. For military applications, antennas should also allow low absolute or out-of-band radar cross-section and facilitate low probability of intercept communications. Investigations have recently begun worldwide on the use of ionised gases or plasmas as the conducting medium in antennas that could satisfy these requirements. Such plasma antennas may even offer a viable alternative to metal in existing applications when overall technical requirements are considered. A recent patent for ground penetrating radar claims the invention of a plasma antenna for the transmission of pulses shorter than 100 ns in which it is claimed that current ringing is avoided and signal processing simplified compared with a metal antenna. A recent US ONR tender has been issued for the design and construction of a compact and rapidly reconfigurable antenna for dynamic signal reception over the frequency range 1 - 45 GHz based on plasma antennas. Recent basic physics experiments at ANU have demonstrated that plasma antennas can attain adequate efficiency, predictable radiation patterns and low base-band noise for HF and VHF communications.
    [Show full text]
  • Plasma Antennas: Survey of Techniques and the Current State of the Art
    NPS-CRC-03-001 MONTEREY, CALIFORNIA Plasma Antennas: Survey of Techniques and the Current State of the Art by D. C. Jenn September 29, 2003 Approved for public release; distribution is unlimited. Prepared for: SPAWAR PMW 189 San Diego, CA REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instruction, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188) Washington DC 20503. 1. AGENCY USE ONLY (Leave 2. REPORT DATE 3. REPORT TYPE AND DATES COVERED blank) September 29, 2003 Technical Report (July 2003 to September 2003) 4. TITLE AND SUBTITLE: 5. FUNDING NUMBERS Plasma Antennas: Survey of Techniques and Current State of the Art 6. AUTHOR(S) David C. Jenn 7. PERFORMING ORGANIZATION NAME(S) AND 8. PERFORMING ADDRESS(ES) ORGANIZATION REPORT Naval Postgraduate School NUMBER Monterey, CA 93943-5000 NPS-CRC-03-001 9. SPONSORING / MONITORING AGENCY NAME(S) AND 10. SPONSORING / MONITORING ADDRESS(ES) AGENCY REPORT NUMBER SPAWAR PMW 189 11. SUPPLEMENTARY NOTES The views expressed in this thesis are those of the author and do not reflect the official policy or position of the Department of Defense or the U.S.
    [Show full text]
  • Design and Fabrication of Plasma Array Antenna with Beam Forming
    http://jecei.srttu.edu Journal of Electrical and Computer Engineering Innovations JECEI, Vol. 5, No. 1, 2017 SRTTU Regular Paper Design and Fabrication of Plasma Array Antenna with Beam Forming Fatemeh Sadat Mohseni Armaki1,* and Seyyed Amirhossein Mohseni Armaki2 1Iran University of Science and Technology, Tehran, Iran. 2University of Tehran, Tehran, Iran. *Corresponding Author’s Information: [email protected] ARTICLE INFO ABSTRACT In this paper, the design and implementation of plasma antenna array ARTICLE HISTORY: with beam forming is discussed. The structure consists of a circular array Received 16 July 2017 of plasma tube enclosed in a unipolar UHF band monopole antenna. Beam Revised 03 September 2017 forming is possible by stimulated plasma tubes. The combination of the Accepted 04 September 2017 above antenna with plasma excitation controller makes a beam forming smart antenna. An experimental model in UHF band is fabricated that KEYWORDS: shows a good agreement between the simulated and measured results. Plasma array antenna Smart antenna Beam forming 1. INTRODUCTION voltages. When the antenna is off, the plasma is non- conducting and therefore the tube is transparent. Ionized gas was proposed as the fourth state of matter When the plasma is on, it exhibits a high conductivity. in 1879 by the English physicist, Sir William Crookes. The main advantage in using plasma antenna instead Plasma is a collection of ionized positive ions and free of metallic elements is that they allow an electrical moving electrons. Ionized gases are good conductors rather than mechanical control. for electricity [1]. Plasma can be generated by electron Usually a commercial tube, designed for lighting impact ionization, heating the gas, photo-ionization or purposes, has been used to create the plasma column.
    [Show full text]
  • Types of Microwave Antenna and Its Applications
    International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 05 Issue: 03 | Mar-2018 www.irjet.net p-ISSN: 2395-0072 Types of Microwave Antenna and Its Applications Lalith Dupathi1, Manasa Gadiyaram2 1,2 K.J Somaiya college of engineering, Mumbai ---------------------------------------------------------------------***--------------------------------------------------------------------- Abstract: This paper represents the classification of E Directive gain of antenna microwave antenna and its applications. Microwave antenna is a type of antenna which is operated at microwave frequency The gain is also known as the directive gain of antenna. Gain and they are widely used in many practical applications. A takes into account the efficiency as well as the directional microwave antenna is a major system component that allows capabilities of the antenna. Gain is the product of efficiency a microwave system to transmit and receive data between and directivity. An antenna which has larger aperture will microwave sites. Microwave have wavelengths ranging from 1 have more gain. meter to 1 millimeter. Microwaves are mainly used in satellite communication. F Antenna beam area Keywords: Microwave Antenna, Classification of It is denoted by ΩA. It is the solid angle through which all of antenna the radiated power by an antenna would flow if power maintains its maximum value over ΩA and zero elsewhere. It Introduction is also defined as the angle subtended by half power point in the main lobe in two principle planes. A Microwave Antenna is a physical transmission device used to broadcast microwave transmissions between two or more G Antenna lobes locations. Mainly used to convert electronic signals to electromagnetic waves.
    [Show full text]
  • Crossed Dipole Antennas: a Review
    See discussions, stats, and author profiles for this publication at: https://www.researchgate.net/publication/282776048 Crossed Dipole Antennas: A review Article in IEEE Antennas and Propagation Magazine · October 2015 DOI: 10.1109/MAP.2015.2470680 CITATIONS READS 32 7,482 3 authors: Son Xuat Ta Ikmo Park VNU University of Science Ajou University 78 PUBLICATIONS 642 CITATIONS 187 PUBLICATIONS 2,123 CITATIONS SEE PROFILE SEE PROFILE R.W. Ziolkowski The University of Arizona 562 PUBLICATIONS 12,913 CITATIONS SEE PROFILE Some of the authors of this publication are also working on these related projects: Artificial Metamaterials View project Metasurface-Inspired Antennas View project All content following this page was uploaded by Son Xuat Ta on 16 November 2015. The user has requested enhancement of the downloaded file. Son Xuat Ta, Ikmo Park, and Richard W. Ziolkowski Crossed Dipole Antennas A review. rossed dipole antennas have been THE HISTORY OF CROSSED widely developed for current and DIPOLE ANTENNAS future wireless communication sys- The crossed dipole is a common type of mod- tems. They can generate isotropic, ern antenna with an radio frequency (RF)- Comnidirectional, dual-polarized (DP), and to millimeter-wave frequency range. The circularly polarized (CP) radiation. More- crossed dipole antenna has a fairly rich and over, by incorporating a variety of primary interesting history that started in the 1930s. radiation elements, they are suitable for The first crossed dipole antenna was devel- single-band, multiband, and wideband oper- oped under the name “turnstile antenna” ations. This article presents a review of the by Brown [1]. In the 1940s, “superturnstile” designs, characteristics, and applications antennas [2]–[4] were developed for a broader of crossed dipole antennas along with the impedance bandwidth in comparison with recent developments of single-feed CP con- the original design.
    [Show full text]
  • Design of a Transmitarray Antenna Using 4 Layers of Double Square Ring Elements
    Progress In Electromagnetics Research Letters, Vol. 94, 141–149, 2020 Design of a Transmitarray Antenna Using 4 Layers of Double Square Ring Elements Xian Wei Chua1, 2, *,Tse-TongChia3, and Kerrell Boon Khim Chia3 Abstract—Conventional dielectric lenses rely on the accumulation of phase delay during wave propagation to produce a desired wavefront. By considering the required phase delay at each lens position, an ‘equivalent’ transmitarray antenna can be obtained. Despite a lack of curvature as in conventional lenses, the phase delay in the transmitarray antenna is achieved via a periodic arrangement of unit cell elements to bend the incident waves in the desired directions. This paper presents the design and characterization of a 4-layer transmitarray antenna consisting of double square ring elements. The gap between the double square rings is varied as a fixed proportion of their dimensions, while keeping the widths constant. The transmitarray element can achieve a transmission phase range of 235◦ with a loss of less than 3 dB. The performance of the transmitarray antenna is explicitly compared to that of a convex dielectric lens, both of which are operating at 8 GHz. 1. INTRODUCTION Transmitarray antennae consist of planar, periodic arrays of printed circuit elements in sub-wavelength lattices. They have many advantages over conventional dielectric lenses for applications in satellite communication, automotive radar, and imaging systems:high-gain, lightweight, cheap, and small [1–7]. While zoning can reduce the weight of conventional lenses, it degrades system performance with reduced bandwidth and increased sidelobe levels [8]. Transmitarray antennae are also easier to fabricate with advancements in printed circuit board technologies [9, 10], while conventional lenses require expensive machining or molding processes [11].
    [Show full text]