White / Red / Jack Pine Group Other Eastern Softwoods Group Exotic

Total Page：16

File Type：pdf, Size：1020Kb

White / Red / Jack Pine Group Other Eastern Softwoods Group Exotic

JUL-01-14 07:43 AM 24091301 Table 6a. -- Net volume of growing-stock trees (at least 5 inches d.b.h./d.r.c.), in thousand cubic feet, on timberland by forest-type group, forest type, and softwood/hardwood species category, Connecticut, 2013 Forest-type group/ All Softwood Hardwood forest type species species species Softwood type groups White / red / jack pine group Red pine 10,091 8,803 1,288 Eastern white pine 130,086 102,363 27,723 Eastern hemlock 48,947 35,994 12,953 All forest types 189,124 147,160 41,964 Other eastern softwoods group Eastern redcedar 134 134 - - All forest types 134 134 - - Exotic softwoods group Norway spruce 19,056 11,679 7,377 All forest types 19,056 11,679 7,377 All softwood groups 208,314 158,973 49,341 Hardwood type groups Oak / pine group Eastern white pine / northern red oak / white ash 152,647 81,257 71,390 Eastern redcedar / hardwood 6,852 1,265 5,587 All forest types 159,499 82,522 76,977 Oak / hickory group Chestnut oak 10,582 - - 10,582 White oak / red oak / hickory 1,671,176 91,648 1,579,528 White oak 45,956 4,330 41,626 Northern red oak 275,128 3,233 271,895 Yellow-poplar / white oak / northern red oak 124,292 4,515 119,777 Sassafras / persimmon 708 - - 708 Scarlet oak 82,070 8,305 73,764 Chestnut oak / black oak / scarlet oak 303,427 35,062 268,364 Cherry / white ash / yellow-poplar 107,012 3,153 103,859 Elm / ash / black locust 43,073 - - 43,073 Red maple / oak 323,787 16,007 307,779 Mixed upland hardwoods 101,030 19,750 81,279 All forest types 3,088,239 186,004 2,902,236 Oak / gum / cypress group Sweetbay / swamp tupelo / red maple 59,947 261 59,686 All forest types 59,947 261 59,686 Elm / ash / cottonwood group Black ash / American elm / red maple 15,989 - - 15,989 River birch / sycamore 5,697 211 5,486 Willow 295 - - 295 Sycamore / pecan / American elm 1,400 - - 1,400 Red maple / lowland 167,782 236 167,546 Cottonwood / willow 3,169 - - 3,169 All forest types 194,331 447 193,884 Maple / beech / birch group Sugar maple / beech / yellow birch 181,715 60,392 121,322 Black cherry 1,013 - - 1,013 Hard maple / basswood 53,868 6,506 47,362 Red maple / upland 7,339 - - 7,339 All forest types 243,934 66,898 177,036 Aspen / birch group Paper birch 2,649 94 2,555 Gray birch 811 - - 811 All forest types 3,460 94 3,366 Other hardwoods group Other hardwoods 124,717 4,955 119,763 All forest types 124,717 4,955 119,763 All hardwood groups 3,874,128 341,180 3,532,948 JUL-01-14 07:43 AM 24091301 (Table 6a continued) Forest-type group/ All Softwood Hardwood forest type species species species Hardwood type groups Nonstocked 483 - - 483 All forest groups 4,082,925 500,153 3,582,772 All table cells without observations in the inventory sample (Tableare indicated 6a continued by --. on next page) Table value of 0 indicates the volume rounds to less than 1,000 cubic feet. Columns and rows may not add to their totals due to rounding..

Copy Link

Recommended publications

Properties of Western Larch and Their Relation to Uses of the Wood
TECHNICAL BULLETIN NO. 285 MARCH, 1932 PROPERTIES OF WESTERN LARCH AND THEIR RELATION TO USES OF THE WOOD BY R. P. A. JOHNSON Engineer, Forest Products Laboratory AND M. I. BRADNER In Charge^ Office of Forest Products y Region I Branch of Research, Forest Service UNITED STATES DEPARTMENT OF AGRICULTURE, WASHINGTON, D. C. TECHNICAL BULLETIN NO. 285 MARCH, 1932 UNITED STATES DEPARTMENT OF AGRICULTURE WASHINGTON, D. C. PROPERTIES OF WESTERN LARCH AND THEIR RELATION TO USES OF THE WOOD By R. P. A. JOHNSON, Engineer, Forest Products Laboratory^^ and M. I. BRADNER, in Charge, Office of Forest Products, Region 1, Branch of Research, Forest Service * CONTENTS Page Page Introduction 1 Mechanical and physical properties—Con. The larch-fir mixture 2 Resistance to decay, weathering, and Character and range of the western larch insects 39 forest __ 4 Reaction to preservative treatment 42 Occurrence 4 Heat and insulating properties 42 Character 4 Permeability by liquids 42 Size of stand 7 Tendency to impart odor or ñavor___:. _. 43 Cut and supply 9 Tendency to leach or exude extractives. _ 43 Merchandising practices 10 Chemical properties 43 distribution lO Fire resistance ., 43 Percentage of cut going into various lum- Characteristic defects of western larch 44 ber items 12 Natural defects 44 Descriptive properties of western larch 13 Seasoning defects 46 General description of the wood 13 Manufacturing defects 47 Heartwood content of lumber 13 Grades and their characteristics 47 Growth rings 14 Grade yield and production 48 Summer-wood content 14 Heartwood content 50 Figure. 14 Width of rings 50 How to distinguish western larch from other Grade descriptions .
[Show full text]
Douglasfirdouglasfirfacts About
DouglasFirDouglasFirfacts about Douglas Fir, a distinctive North American tree growing in all states from the Rocky Mountains to the Pacific Ocean, is probably used for more Beams and Stringers as well as Posts and Timber grades include lumber and lumber product purposes than any other individual species Select Structural, Construction, Standard and Utility. Light Framing grown on the American Continent. lumber is divided into Select Structural, Construction, Standard, The total Douglas Fir sawtimber stand in the Western Woods Region is Utility, Economy, 1500f Industrial, and 1200f Industrial grades, estimated at 609 billion board feet. Douglas Fir lumber is used for all giving the user a broad selection from which to choose. purposes to which lumber is normally put - for residential building, light Factory lumber is graded according to the rules for all species, and and heavy construction, woodwork, boxes and crates, industrial usage, separated into Factory Select, No. 1 Shop, No. 2 Shop and No. 3 poles, ties and in the manufacture of specialty products. It is one of the Shop in 5/4 and thicker and into Inch Factory Select and No. 1 and volume woods of the Western Woods Region. No. 2 Shop in 4/4. Distribution Botanical Classification In the Western Douglas Fir is manufactured by a large number of Western Woods Douglas Fir was discovered and classified by botanist David Douglas in Woods Region, Region sawmills and is widely distributed throughout the United 1826. Botanically, it is not a true fir but a species distinct in itself known Douglas Fir trees States and foreign countries. Obtainable in straight car lots, it can as Pseudotsuga taxifolia.
[Show full text]
4-H Wood Science Leader Guide Glossary of Woodworking Terms
4-H Wood Science Leader Guide Glossary of Woodworking Terms A. General Terms B. Terms Used in the Lumber Industry d—the abbreviation for “penny” in designating nail boards—Lumber less than 2 inches in nominal size; for example, 8d nails are 8 penny nails, 2½” long. thickness and 1 inch and wider in width. fiber—A general term used for any long, narrow cell of board foot—A measurement of wood. A piece of wood wood or bark, other than vessels. that is 1 foot long by 1 foot wide by 1 inch thick. It can also be other sizes that have the same total amount grain direction—The direction of the annual rings of wood. For example, a piece of wood 2 feet long, showing on the face and sides of a piece of lumber. 6 inches wide, and 1 inch thick; or a piece 1 foot long, hardwood—Wood from a broad leaved tree and 6 inches wide, and 2 inches thick would also be 1 board characterized by the presence of vessels. (Examples: foot. To get the number of board feet in a piece of oak, maple, ash, and birch.) lumber, measure your lumber and multiply Length (in feet) x Width (in feet) x Thickness (in inches). The heartwood—The older, harder, nonliving portion of formula is written: wood. It is usually darker, less permeable, and more durable than sapwood. T” x W’ x L’ T” x W’ x L’ = Board feet or = Board feet 12 kiln dried—Wood seasoned in a humidity and temperature controlled oven to minimize shrinkage T” x W’ x L’ or = Board feet and warping.
[Show full text]
Hardwood Trees
Tree Identification Guide for Common Native Trees of Nova Scotia Before you Start! • To navigate through this presentation you must use the buttons at the bottom of your screen or select from the underlined choices. • The following presentation includes most of Nova Scotia’s commercial tree species. There are far too many other non-commercial species to cover in this presentation. Please refer to the books listed on the following page for more information. References • Trees of Nova Scotia – Gary Saunders • Native Trees of Canada –R.C. Rosie • Silvics of Forest Trees of the United States – US Department of Agriculture Main Menu Softwood Softwood Key Hardwood Hardwood Key Glossary Glossary of Terms Main Menu Alternate leaf arrangement - one of two kinds of arrangements of leaves along shoots of hardwoods; in this case the leaves appear at staggered intervals along the shoot. Bark - The outer covering of the trunk and branches of a tree, usually corky, papery or leathery. Bud - rounded or conical structures at tips of (terminal buds), or along (lateral or auxiliary buds) stems or branches, usually covered tightly in protective scales and containing a preformed shoot (with leaves), or a preformed inflorescence (with flowers). May or may not be on a stalk. Clear cut - a silvicultural system that removes an entire stand of trees from an area of one hectare or more, and greater that two tree heights in width, in a single harvesting operation. Compound leaf - a leaf divided into smaller leaflets. Cone - in botany, a reproductive structure bearing seeds (seed cone) or pollen (pollen cone) in conifers.
[Show full text]
INDENTATION HARDNESS of WOOD J. Doyle1 and J. C. F. Walker School of Forestry, University of Canterbury Christchurch 1, New Zealand (Received March 1984)
INDENTATION HARDNESS OF WOOD J. Doyle1 and J. C. F. Walker School of Forestry, University of Canterbury Christchurch 1, New Zealand (Received March 1984) ABSTRACT An historical background to hardness testing of wood is given, and the advantages and disadvantages of the methods used are reviewed. A new method, using a wedge indenter, is suggested and a rationale presented that includes discussion of the deformation patterns beneath indenting tools. Keywords: Ball, Brinell, cone, cylinder, hardness, Janka, Meyer, Monnin, wedge. INTRODUCTION Hardness testing of wood has made little progress since Janka (1 906). Although there have been many studies leading to a variety of tests, there are shortcomings with all of them. Furthermore, the various hardness values are not easily com- parable one to another and do not allow comparison with those for other materials, where testing procedures have a more rational basis. The wedge test that we advocate does allow for comparison with other materials while also taking account of wood anisotropy. Hardness implies the ability of a body to resist deformation. In a typical test a hard tool of known geometry is forced into the body, and the hardness is defined as the ratio of the applied force to the size of the indentation. This size depends on whether it is determined under load or on unloading. With elastic materials it is determined under load as there will be little or no permanent deformation, whereas with plastic materials the size of the permanent indentation is measured (Tabor 195 1). With wood there are difficulties in measuring the impression, especially for shallow indentations where the imprint is indistinct.
[Show full text]
South Carolina's Forest Resources—2000 Update
United States Department of South Carolina's Agriculture Forest Service Forest Resources—2000 Update Southern Research Station Roger C. Conner and Raymond M. Sheffield Resource Bulletin SRS–65 PIEDMONT NORTHERN COASTAL PLAIN SOUTHERN COASTAL PLAIN The Authors: Roger C. Conner is a Research Forester and Raymond M. Sheffield is a Supervisory Research Forester with the Forest Inventory and Analysis Research Work Unit, Southern Research Station, U.S. Department of Agriculture, Forest Service, Asheville, NC 28802. December 2001 Southern Research Station P.O. Box 2680 Asheville, NC 28802 Foreword This bulletin highlights the initial results of an annual inventory of South Carolina’s forest resources. Annual inventories of the Nation’s forests are mandated by the Agricultural Research Extension and Education Reform Act of 1998 (1998 Farm Bill). The current annual forest inventory program has several new features: (1) a nationally consistent, fixed-radius, four-point plot configuration; (2) a systematic national sampling design featuring a base grid derived by subdividing the Environmental Monitoring and Assessment Program grid into approximately 6,000-acre hexagons; (3) integration of the Forest Inventory and Analysis (FIA) and Forest Health Monitoring (FHM) sampling designs; (4) annual measurement of a fixed proportion of permanent FIA/FHM plots in each State; (5) reporting of data or data summaries within 6 months of completion of a year’s sampling; (6) a default 5-year moving average estimator, with provisions for optional estimators based on techniques for updating information; and (7) State inventory reports every 5 years. For additional information, you may access the national FIA Web site at http://fia.fs.fed.us/.
[Show full text]
Distinguishing Softwoods from Hardwoods
University of Kentucky UKnowledge Agriculture and Natural Resources Publications Cooperative Extension Service 12-2015 Distinguishing Softwoods from Hardwoods Terry Conners University of Kentucky, [email protected] Right click to open a feedback form in a new tab to let us know how this document benefits oy u. Follow this and additional works at: https://uknowledge.uky.edu/anr_reports Part of the Agriculture Commons, and the Environmental Sciences Commons Repository Citation Conners, Terry, "Distinguishing Softwoods from Hardwoods" (2015). Agriculture and Natural Resources Publications. 105. https://uknowledge.uky.edu/anr_reports/105 This Report is brought to you for free and open access by the Cooperative Extension Service at UKnowledge. It has been accepted for inclusion in Agriculture and Natural Resources Publications by an authorized administrator of UKnowledge. For more information, please contact [email protected]. COOPERATIVE EXTENSION SERVICE UNIVERSITY OF KENTUCKY COLLEGE OF AGRICULTURE, FOOD AND ENVIRONMENT, LEXINGTON, KY, 40546 FOR-125 PART IDENTIFYING WOOD—A Primer for Everyone 3 Distinguishing Softwoods from Hardwoods Terry Conners, Forestry What Hardwoods Look Like The most important distinction be- tween softwoods and hardwoods is that almost all hardwoods contain a type of cell called a vessel element.2 Vessel ele- ments are similar to segments of small pipes that run throughout the tree in the longitudinal direction, connecting the top of the tree with the root system. A collection of vessel elements joined end-to-end is known as a vessel. Vessels can be readily seen on the cross-sectional surface of any hardwood species, where they appear as holes (pores); hardwoods are hence frequently known colloqui- ally as porous woods (or porous species).
[Show full text]
Chapter 5--Commercial Lumber
Chapter 5 Commercial Lumber Kent A. McDonald and David E. Kretschmann n a broad sense, commercial lumber is any lumber Contents that is bought or sold in the normal channels of Hardwood Lumber 5–1 commerce. Commercial lumber may be found in a variety of forms, species, and types, and in various commer- Factory Lumber 5–2 cial establishments, both wholesale and retail. Most com- Dimension and Component Parts 5–2 mercial lumber is graded by standardized rules that make purchasing more or less uniform throughout the country. Finished Market Products 5–6 When sawn, a log yields lumber of varying quality. To Lumber Species 5–7 enable users to buy the quality that best suits their purposes, Softwood Lumber 5–7 lumber is graded into use categories, each having an appro- priate range in quality. Lumber Grades 5–7 Lumber Manufacture 5–10 Generally, the grade of a piece of lumber is based on the number, character, and location of features that may lower the Softwood Lumber Species 5–12 strength, durability, or utility value of the lumber. Among Softwood Lumber Grading 5–12 the more common visual features are knots, checks, pitch pockets, shake, and stain, some of which are a natural part of Purchase of Lumber 5–12 the tree. Some grades are free or practically free from these features. Other grades, which constitute the great bulk of Retail Yard Inventory 5–16 lumber, contain fairly numerous knots and other features. Important Purchase Considerations 5–17 With proper grading, lumber containing these features is entirely satisfactory for many uses.
[Show full text]
Some Common Stains of Softwood Lumber
SOME COMMON STAINS OF SOFTWOOD LUMBER Donald J. Miller Forest Research Laboratory Oregon State University, Corvallis, Oregon Lumber Grading Rules generally define stain as a discolor- ation that is different than the "natural color" of the rest of the board. It may be graded as light, medium or heavy stain according to the intensity of discoloration. Light stain may be barely perceptible and does not materially affect a natural fin- - ish. At the other extreme, heavy stain may obscure the wood grain and is unacceptable for a clear finish, but is suitable for painting. The Rules may differentiate between heartwood stain and sapwood stain. They also may note that where stain is permitted it does not affect the intended use of the piece. That is, stain degrades the appearance of the wood, but otherwise has no practical effect on its strength or utility. The most common and troublesome stains are the bluish-gray sap stains, and, to a lesser degree, the brown stains. The blue-gray sap stains are usually caused by wood-staining fungi growing in moist sapwood. Brown stains often are of nonfungal origin and may result from the darkening of materials which occur naturally in the wood. They generally are called "chem- ical" brown stains. Other less prevalent discolorations (pink, purplish, yellowing and tans), may occur in heartwood of living trees, or in old logs. They are likely to be an incipient stage of rot; i.e. "Firm Red Heart" is the incipient stage of red ring rot caused by the fungus F. pini. Occasionally we see samples of unusual staining which we cant identify.
[Show full text]
Wood-Frame House Construction
WOOD-FRAME HOUSE CONSTRUCTION U.S. DEPARTMENT OF AGRICULTURE «FOREST SERVICB»AGRICULTURE HANDBOOK NO. 73 WOOD-FRAME HOUSE CONSTRUCTION By L. O. ANDERSON, Engineer Forest Products Laboratory — Forest Service U. S. DEPARTMENT OF AGRICULTURE Agriculture Handbook No. 73 • Revised July 1970 Slightly revised April 1975 For sale by the Superintendent of Documents, U.S. Government Printing Office, Washincfton, D.C. 20402 Price: $2.60 ACKNOWLEDGMENT Acknowledgment is made to the following members of the Forest Products Laboratory (FPL) for their contributions to this Handbook: John M. Black, for information on painting and finishing; Theodore C. Scheffer, for information on protection against termites and decay; and Herbert W. Eickner, for information on protection against fire. Acknowledgment is also made to Otto C. Heyer (retired) for his part as a co-author of the first edition and to other FPL staff members who have contributed valuable information for this revision. The wood industry has also contributed significantly to many sections of the publication. 11 CONTENTS Page Page Introduction 1 Chapter 6.—Wall Framing 31 Requirements 31 Chapter 1.—Location and Excavation 1 Platform Construction 31 Condition at Site 1 Balloon Construction 33 Placement of the House 3 Window and Door Framing 34 Height of Foundation Walls 3 End-wall Framing 36 Excavation 4 Interior Walls 38 Chapter 2.—Concrete and Masonry 5 Lath Nailers 39 Mixing and Pouring 5 Chapter 7.—Ceiling and Roof Framing 40 Footings 5 Ceiling Joists 40 Draintile 7 Flush Ceiling Framing 42
[Show full text]
Woodworking Glossary, a Comprehensive List of Woodworking Terms and Their Definitions That Will Help You Understand More About Woodworking
Welcome to the Woodworking Glossary, a comprehensive list of woodworking terms and their definitions that will help you understand more about woodworking. Each word has a complete definition, and several have links to other pages that further explain the term. Enjoy. Woodworking Glossary A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | #'s | A | A-Frame This is a common and strong building and construction shape where you place two side pieces in the orientation of the legs of a letter "A" shape, and then cross brace the middle. This is useful on project ends, and bases where strength is needed. Abrasive Abrasive is a term use to describe sandpaper typically. This is a material that grinds or abrades material, most commonly wood, to change the surface texture. Using Abrasive papers means using sandpaper in most cases, and you can use it on wood, or on a finish in between coats or for leveling. Absolute Humidity The absolute humidity of the air is a measurement of the amount of water that is in the air. This is without regard to the temperature, and is a measure of how much water vapor is being held in the surrounding air. Acetone Acetone is a solvent that you can use to clean parts, or remove grease. Acetone is useful for removing and cutting grease on a wooden bench top that has become contaminated with oil. Across the Grain When looking at the grain of a piece of wood, if you were to scratch the piece perpendicular to the direction of the grain, this would be an across the grain scratch.
[Show full text]
A Glossary of Common Forestry Terms
W 428 A Glossary of Common Forestry Terms A Glossary of Common Forestry Terms David Mercker, Extension Forester University of Tennessee acre artificial regeneration A land area of 43,560 square feet. An acre can take any shape. If square in shape, it would measure Revegetating an area by planting seedlings or approximately 209 feet per side. broadcasting seeds rather than allowing for natural regeneration. advance reproduction aspect Young trees that are already established in the understory before a timber harvest. The compass direction that a forest slope faces. afforestation bareroot seedlings Establishing a new forest onto land that was formerly Small seedlings that are nursery grown and then lifted not forested; for instance, converting row crop land without having the soil attached. into a forest plantation. AGE CLASS (Cohort) The intervals into which the range of tree ages are grouped, originating from a natural event or human- induced activity. even-aged A stand in which little difference in age class exists among the majority of the trees, normally no more than 20 percent of the final rotation age. uneven-aged A stand with significant differences in tree age classes, usually three or more, and can be basal area (BA) either uniformly mixed or mixed in small groups. A measurement used to help estimate forest stocking. Basal area is the cross-sectional surface area (in two-aged square feet) of a standing tree’s bole measured at breast height (4.5 feet above ground). The basal area A stand having two distinct age classes, each of a tree 14 inches in diameter at breast height (DBH) having originated from separate events is approximately 1 square foot, while an 8-inch DBH or disturbances.
[Show full text]