DOCSLIB.ORG

Mechanical Hangers and Supports for Plumbing, HVAC and Fire Protection

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Mechanical Hangers and Supports for Plumbing, HVAC and Fire Protection Mechanical Hangers and Supports for Plumbing, HVAC and Fire Protection Ph: 1-800-333-0852 www.erico.com CADDY® Mechanical Hangers and Supports for Plumbing, HVAC and Fire Protection Ph: 1-800-333-0852 www.erico.com DESIGNS All dimensions are ± 5% and product design and specifications are subject to change without notice. DESIGN AND MANUFACTURING Supports and hangers may be manufactured in conformance with one or more of the following: Manufacturers Standardization Society MSS-SP-58 Federal Specification WW-H-171 Factory Mutual Research Corporation Underwriters Laboratories, Inc. National Fire Protection Association NFPA®-13 , NFPA 24 ANSI Code for Pressure Piping TERMS AND CONDITIONS OF SALE For ordering, terms and conditions of sale, please consult our current price guide. WARNING ERICO products shall be installed and used only as indicated in ERICO’s product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death. WARRANTY ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER’S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT. LIMITATION OF LIABILITY ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER. ANSI is a registered trademark of American National Standards Institute ASTM is a registered trademark of ASTM International UL is a is a registered trademark of Underwriters Laboratories, Inc. ASME is a is a registered trademark of American Society of Mechanical Engineers NFPA is a registered trademark of National Fire Protection Association Ph: 1-800-333-0852 www.erico.com TABLE OF CONTENTS Product Picture Reference . Pages I-XXVI 1 Clevis Hangers . Page 3 2 Split Ring Hangers. Page 13 3 Loop Hangers. Page 19 4 Riser Clamps. Page 31 5 Pipe Fixings . Page 43 6 Universal Support System - CADDY® SPEED LINK. Page 65 7 Pipe and Equipment Supports - CADDY® PYRAMID . Page 69 8 Perforated Pipe Straps . Page 73 9 Strut Pipe Clamps . Page 77 10 CPVC Pipe Fixings . Page 89 11 Beam Clamps . Page 93 12 Structural Attachments. Page 119 13 Supports, Guides & Rollers . Page 139 14 Shields & Saddles . Page 161 15 Strut, Fittings & Accessories . Page 173 16 Stainless Steel Products . Page 215 17 Rods, Plates & Hardware . Page 223 18 Slotted Angle. Page 245 19 Sway Bracing . Page 249 20 Technical Information . Page 255 Ph: 1-800-333-0852 www.erico.com CLEVIS HANGERS 1 NEWNEW Page 4 Page 5 Page 6 401 CADDY® SLOT LOCK 410 Page 7 Page 8 Page 9 402 420 401RO Page 10 Page 11 403 405 Ph: 1-800-333-0852 I www.erico.com SPLIT RING HANGERS 2 NEWNEW NEWNEW Page 14 Page 15 Page 15 CADDY® SUPERFIX 454 BH 111 Page 16 Page 17 455 456 LOOP HANGERS 3 NEWNEW NEWNEW Page 20 Page 21 Page 21 100 LHSR6 115 Page 22 Page 23 Page 24 101 100FL 102 Ph: 1-800-333-0852 www.erico.com II LOOP HANGERS 3 Page 25 Page 26 Page 27 102A 103 104 Page 27 Page 28 Page 29 VTR 418 418FL RISER CLAMPS 4 NEWNEW Page 32 Page 33 Page 34 CADDY® EZ RISER 510RO 511 Page 35 Page 36 Page 37 520 450 451 Ph: 1-800-333-0852 III www.erico.com RISER CLAMPS 4 Page 38 Page 39 Page 40 452 453 700 Page 41 Page 42 Page 42 705 517 516 PIPE FIXINGS 5 Page 45 Page 45 Page 46 007 STR 008 Page 47 Page 47 Page 48 STR2 470 008CP Ph: 1-800-333-0852 www.erico.com IV PIPE FIXINGS 5 NEWNEW Page 49 Page 50 Page 51 008CU 135 U-Hanger DWV NEWNEW NEWNEW NEWNEW Page 52 Page 53 Page 54 WH TPC CADDY® SUPERKLIP Page 55 Page 55 Page 55 SMS8 SGB TSGB Page 56 Page 57 Page 57 150M M-Series MCP-Series Ph: 1-800-333-0852 V www.erico.com PIPE FIXINGS 5 Page 58 Page 59 Page 60 M-Series MCP-Series CD-Series Page 61 Page 62 Page 63 CDCP-Series 801 800 Page 64 Page 64 802 EPS UNIVERSAL SUPPORT SYSTEM 6 CADDY® SPEED LINK NEWNEW NEWNEW Page 66 Page 67 Page 68 CADDY® SPEED LINK CADDY® SPEED LINK LD SLADCP Ph: 1-800-333-0852 www.erico.com VI UNIVERSAL SUPPORT SYSTEM 6 CADDY® SPEED LINK Page 68 Page 68 Page 68 SLADS SLWC SLWPT Page 68 SLEB PIPE & EQUIPMENT SUPPORTS 7 CADDY® PYRAMID NEWNEW NEWNEW NEWNEW Page 70 Page 71 Page 72 CADDY® PYRAMID 25 CADDY® PYRAMID 50 CADDY® PYRAMID 150 CADDY® PYRAMID 300 CADDY® PYRAMID 600 Ph: 1-800-333-0852 VII www.erico.com PERFORATED PIPE STRAPS 8 Page 74 Page 74 Page 75 009EG 009CP 009CU Page 75 Page 76 MSR MSS STRUT PIPE CLAMPS 9 NEWNEW Page 78 Page 79 Page 80 RIGD OD PCC Page 81 Page 82 Page 82 TCC COPC EMTC Ph: 1-800-333-0852 www.erico.com VIII STRUT PIPE CLAMPS 9 NEWNEW NEWNEW NEWNEW Page 83 Page 83 Page 84 TSM TSMI SCH NEWNEW Page 85 Page 86 Page 86 SK STR STR2 Page 87 Page 87 UNIV VS-20 Ph: 1-800-333-0852 IX www.erico.com CPVC PIPE FIXINGS 10 Page 90 Page 90 Page 91 107 108 109 NEWNEW Page 91 SO BEAM CLAMPS 11 Page 95 Page 96 Page 97 280 300 310 Page 98 Page 99 Page 100 255 255L BC26 Ph: 1-800-333-0852 www.erico.com X BEAM CLAMPS 11 Page 101 Page 102 Page 103 200 200RS 547/548 Page 104 Page 105 Page 106 PH PHSW BC13 B A RS Page 107 Page 108 Page 109 BC14 BC10 BC15 Page 109 Page 110 Page 111 BC09 315 PAR Ph: 1-800-333-0852 XI www.erico.com BEAM CLAMPS 11 Page 111 Page 112 Page 113 ET RA 300C Page 114 Page 114 Page 115 35RS 34SL 255C Page 115 Page 116 Page 117 356 360 361 Page 118 363 Ph: 1-800-333-0852 www.erico.com XII STRUCTURAL ATTACHMENTS 12 Page 121 Page 121 Page 122 365M 365 355 Page 123 Page 124 Page 125 355N 370A 37 Page 126 Page 127 Page 128 38 325 326 Page 129 Page 130 Page 131 327 328 319 Ph: 1-800-333-0852 XIII www.erico.com STRUCTURAL ATTACHMENTS 12 Page 131 Page 132 Page 133 340 320L / 320W 348 Page 134 Page 134 Page 135 350 351 352 Page 136 Page 137 Page 137 353 4TI / 6TI AF Page 138 Page 138 VF VAFT Ph: 1-800-333-0852 www.erico.com XIV SUPPORTS, GUIDES & ROLLERS 13 Page 141 Page 142 Page 143 605 610 615 RS B A C Page 144 Page 145 Page 146 617 619 620 Page 147-149 Page 147-149 Page 150 ROL12 ROL13 ROL14 Page 151 Page 152-153 Page 154-155 ROL15 650 651 Ph: 1-800-333-0852 XV www.erico.com SUPPORTS, GUIDES & ROLLERS 13 Page 156 Page 157 Page 158 721 722 723 Page 159 724 SHIELDS & SADDLES 14 Page 162 Page 163 Page 164 125 121 126 Page 165 Page 166 Page 167 127 630 631 Ph: 1-800-333-0852 www.erico.com XVI SHIELDS & SADDLES 14 Page 168 Page 169 Page 170 632 633 634 Page 171 635 STRUT, FITTINGS, & ACCESSORIES 15 Page 179 Page 180 Page 180 A12 A14 B12 Page 181 Page 182 Page 182 C12 C14 D12 Ph: 1-800-333-0852 XVII www.erico.com STRUT, FITTINGS, & ACCESSORIES 15 NEWNEW Page 183 Page 183 Page 184 E12 CONC CADDY® SLICK NEWNEW Page 185 Page 186 Page 186 STS NUT NUTC Page 187 Page 187 Page 188 SPRA SPRC SPRD Page 188 Page 189 Page 190 SPRM TSNT SQNT NEWNEW Page 190 Page 191 Page 192 VS STCB BC16 Ph: 1-800-333-0852 www.erico.com XVIII STRUT, FITTINGS, & ACCESSORIES 15 Page 192 Page 193 Page 193 BC17 BR22 Strut Cover Page 194 Page 194 Page 195 ENDC F09 F10-F12 Page 195 Page 196 Page 196 F13-F18 F20 F22 Page 197 Page 197 Page 198 F23 F25 F36 Ph: 1-800-333-0852 XIX www.erico.com STRUT, FITTINGS, & ACCESSORIES 15 Page 198 Page 199 Page 199 F37 L10 L11 Page 200 Page 200 Page 201 L12 L15 L16-L17 Page 201 Page 202 Page 202 L18 L19-L20 L22 Page 203 Page 203 Page 204 L23 L24 L25 Page 204 Page 205 Page 205 L26 L27 L44 Ph: 1-800-333-0852 www.erico.com XX STRUT, FITTINGS, & ACCESSORIES 15 Page 206 Page 206 Page 207 L46 L47 P09 Page 207 Page 208 Page 208 P10 P11 P13 Page 209 Page 209 Page 210 ROL10 ROL11 U10A Page 210 Page 211 Page 211 U24 W10 W12 Ph: 1-800-333-0852 XXI www.erico.com STRUT, FITTINGS, & ACCESSORIES 15 Page 212 Page 212 Page 213 W13 W17 W18 Page 213 Page 214 Page 214 W19 W20 W23 STAINLESS STEEL PRODUCTS 16 Page 216 Page 217 Page 218 105 406 305 Page 219 Page 220 Page 221 150 OD RIGD Ph: 1-800-333-0852 www.erico.com XXII RODS, PLATES & HARDWARE 17 Page 226 Page 226 Page 227 304B2 005 10 Page 227 Page 228 Page 228 10H 11 12 Page 229 Page 230 Page 230 50 51 25 Page
Load more

Recommended publications
  • Pipe Hanger Design & Engineering
    Pipe Hanger Design & Engineering For the most current product/ pricing information on ASC Engineered Solutions, please visit our website at asc-es.com. Today Anvil® International is the largest and most complete fitting and hanger manufacturer in the world. 2004 Anvil® International acquires Star Pipe Products, Building and Construction Divisions (SPF) and forms AnvilStarTM Fire Products Division. 2001 Anvil® International acquires Merit® Manufacturing and Beck Manufacturing. 2000 The industry’s trusted manufacturer of pipe fittings, hangers and grooved fittings is renamed Anvil® International, Inc. TRUSTED 1999 Tyco sells the distribution and manufacturing FOR 150 YEARS operations known up to this point as ”Grinnell Supply Sales”, but keeps the Grinnell® trademark. We built our reputation from the ground up. Anvil’s history stretches back to the mid 1800s, when a company named Grinnell® began providing its customers with the finest quality pipe products. ™ ™ 1994 J.B. Smith and Catawissa join the Grinnell Since 2000, those quality products and services— Supply Sales and Manufacturing division. and the people who provide them—have been known as Anvil® International. Anvil® customers receive the quality and integrity that have been building strong connections in both products and business relationships for over 150 years. Focused Product Line: 1969 Grinnell Co. acquired by International Telephone ® ® and Telegraph. Two years later, ITT divests the Fire Anvil Malleable and Cast Gruvlok Couplings, Protection Division, but keeps the manufacturing Iron Fittings Fittings and Va lves and sales divisions that will become known as Anvil ® Hangers, Supports SP F TM Malleable and Cast ® Anvil International. and Struts and Ductile Iron Fittings Beck Welded Pipe Nipples SP F TM Grooved Fittings Anvil ® Seamless Pipe and O’Let s 1960 Gruvlok® line of grooved fittings is introduced.
    [Show full text]
  • US EPR Piping Analysis and Pipe Support Design Topical Report
    ANP-10264NP Revision 1 U.S. EPR Piping Analysis and Pipe Support Design Topical Report May 2010 AREVA NP Inc. Non-Proprietary (c) 2010 AREVA NP Inc. Copyright © 2010 AREVA NP Inc. All Rights Reserved AREVA NP Inc. ANP-10264NP Revision 1 U.S. EPR Piping Analysis and Pipe Support Design Topical Report Page i Nature of Changes Revision 0 Section(s) Item or Page(s) Description and Justification 1. All This is a new document Revision 1 Section(s) Item or Page(s) Description and Justification 1. 2-1 Section 2.1 Changed references to the 2001 edition of the ASME Code, 2003 Addenda to the 2004 edition 3-9, Section 3.8.1 of the ASME Code (no addenda) in response to 3-27, Table 3-2 U.S. EPR FSAR RAI 365. 8-1, Section 8.0 2. 2-2, Section 2.2 Added a note that code cases N-122-2, N-318-5, N-391-2, and N-392-3 have been incorporated into the 2004 edition of the ASME Code (no addenda) in response to U.S. EPR FSAR RAI 365. Revision 1 incorporates the items identified above. The remainder of the document retains approved status associated with the Revision 0 SER. AREVA NP Inc. ANP-10264NP Revision 1 U.S. EPR Piping Analysis and Pipe Support Design Topical Report Page ii Contents Page 1.0 INTRODUCTION ............................................................................................... 1-1 2.0 CODES AND STANDARDS.............................................................................. 2-1 2.1 ASME Boiler and Pressure Vessel Code................................................ 2-1 2.2 ASME Code Cases................................................................................. 2-1 2.3 Design Specification ..............................................................................
    [Show full text]
  • Pipe Supports
    FAQs Pipe Supports Q What does CTS mean and how does it affect the size of the pipe support selected? A CTS is an acronym for Copper Tube Size. Oatey supports are sized based on CTS. For example; 1/2" CTS piping used in plumbing applications actually has a 5/8" outside diameter (OD), but is referred to as 1/2" pipe. 3/4" CTS piping used in same application has a 7/8" OD, but is referred to as 3/4" pipe. Pipe classified as IPS or Iron Pipe Size will have larger ODs than CTS and HVAC pipe ODs are smaller than CTS. Q Is a plastic hanger strap approved for supporting pipes? A No. A plastic hanger strap should only be used for temporary or non-load bearing applications. It can also be used as a mid-level strapping where required by code. Q What pipe support product should be used for water lines passing through metal stud framing? A Metal Stud Insulating Pipe Clamps. These are available for 1/2", 3/4" and 1" pipe sizes. Q Are any of the plastic pipe support clamps approved for use with hydronic systems? A Yes. All Oatey plastic pipe supports are approved for this application, but you should confirm the maximum temperature that the pipes will reach when in use. With the exception of the DuoFit Pipe Clamps rated from 0°F to 230°F and the Stand-Off Half Clamps rated from -60°F to 160°F, all other Oatey plastic straps are rated from 0°F to 180°F.
    [Show full text]
  • Pvc Piping Systems for Commercial and Industrial Applications
    PVC PIPING SYSTEMS FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS Plastic Pipe and Fittings Association © 2012 Plastic Pipe and Fittings Association (PPFA) Acknowledgments We would like to thank the following contributors to the Design Guide: The PVC and Thermoplastic Industrial Piping Systems (TIPS) Product Line Committees and member companies of the Plastic Pipe and Fittings Association (PPFA). In particular the following PPFA companies and individuals ably assisted in reviewing the text and tables and provided valuable comments which added greatly in producing a better and more accurate source document: Chuck Bush – Oatey Company Mike Cudahy – PPFA Staff Patrick Fedor – IPEX Bill Morris – Charlotte Pipe & Foundry Jack Roach – Mueller Industries Bill Weaver – Harvel Plastics Larry Workman – LASCO Fittings All text, tables and photos were prepared and or edited by David A. Chasis of Chasis Consulting, Inc. Using the Design Guide The Design Guide was created to assist engineers, installers, end-users, engineering students and building code officials in learning more of the dos and don’ts of PVC piping systems. The Design Guide is comprised of ten sections including: Introduction Features and Benefits Engineering Design Joining Methods Installation Testing and Repair Applications Building Codes, Standards, and Sample Specifications PVC Piping and the Environment Other Plastic Piping Systems In addition, in the back of the guide is the most complete appendix and glossary of PVC piping systems ever assembled. Other PPFA Educational Materials The PPFA offers a wide range of other educational materials developed to assist the engineering and construction industry to become more proficient in the use of the preferred piping system...plastics! On-site seminars, Webinars, CD-based seminars, workbooks, online tutorials and product and technical literature are available.
    [Show full text]
  • Review of Stress Analysis Results According to Decoupling Criteria Change and Suggestion of Alternative Solution
    18th International Conference on Structural Mechanics in Reactor Technology (SMiRT 18) Beijing, China, August 7-12, 2005 SMiRT18-F05-6 REVIEW OF STRESS ANALYSIS RESULTS ACCORDING TO DECOUPLING CRITERIA CHANGE AND SUGGESTION OF ALTERNATIVE SOLUTION Joong-Kyo Shin * Kyoung-Mo Yang Korea Power Engineering Company, inc. Korea Power Engineering Company, inc. 360-9 Mabuk-ri, Guseong-eup, Yongin-si, 360-9 Mabuk-ri, Guseong-eup, Yongin-si, Gyeonggi-do, 449-713, Korea Gyeonggi-do, 449-713, Korea Phone: 82-31-289-3737, Phone: 82-31-289-3636, Fax: 82-31-289-4109 Fax: 82-31-289-4105 E-mail: [email protected] E-mail: [email protected] ABSTRACT For OPR 1000(Optimized Power Reactor 1000) which was called as KSNP(Korean Standard Nuclear Plant), if moment-of-inertia ratio of run to branch pipe (Ir/Ib) is larger than 7 to 1, or diameter ratio of the run to the branch pipe (Dr/Db) is larger than 3 to 1, the branch pipe could be decoupled from the run pipe in piping stress analyses. But, EPRI URD and WRC Bulletin 300 criteria, Ir/Ib ≥ 25, are more difficult to accommodate the design sequence and designers’ convenience, than Ir/Ib ≥ 7. If the branch pipe, branching off the run pipe, cannot be decoupled in a piping stress analysis according to the criterion, Ir/Ib ≥ 25, the design sequence of the branch pipe should be parallel with that of the run pipe. However, in general, the design process for run pipe always precedes the process for the branch pipe, because the works for run pipe closely interfaces with other works such as calculation of penetration loads and size of embedded plate for the pipe support design.
    [Show full text]
  • Hangers and Supports for Plumbing Piping and Equipment
    Sharonville Fire Station 87 November 2019 SECTION 220529 - HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUBMITTAL REQUIRMENTS A. Product Data: For each type of product. 1. Include construction details, rated capacities, material descriptions, dimensions of individual components and profiles, and finishes. 2. Clearly state model numbers on all submittals. 1.2 PERFORMANCE REQUIREMENTS A. Delegated Design: Design trapeze pipe hangers and equipment supports, including comprehensive engineering analysis by a qualified professional engineer, using performance requirements and design criteria indicated. B. Structural Performance: Hangers and supports for plumbing piping and equipment shall withstand the effects of gravity loads and stresses within limits and under conditions indicated according to ASCE/SEI 7. 1. Design supports for multiple pipes, including pipe stands, capable of supporting combined weight of supported systems, system contents, and test water. 2. Design equipment supports capable of supporting combined operating weight of supported equipment and connected systems and components. PART 2 - PRODUCTS 2.1 METAL PIPE HANGERS AND SUPPORTS A. Carbon-Steel Pipe Hangers and Supports: 1. Description: MSS SP-58, Types 1 through 58, factory-fabricated components. 2. Galvanized Metallic Coatings: Pregalvanized or hot dipped. 3. Padded Hangers: Hanger with fiberglass or other pipe insulation pad or cushion to support bearing surface of piping. 4. Hanger Rods: Continuous-thread rod, nuts, and washer made of carbon or stainless steel. B. Copper Pipe Hangers: 1. Description: MSS SP-58, Types 1 through 58, copper-coated-steel, factory- fabricated components. Hangers and Supports for Plumbing Piping and Equipment 220529 - 1 Sharonville Fire Station 87 November 2019 2.
    [Show full text]
  • Guideline for the Seismic Design and Retrofit of Piping Systems, 2002
    Seismic Design and Retrofit of Piping Systems AmericanLifelinesAlliance A public-private partnership to reduce risk to utility and transportation systems from natural hazards Seismic Design and Retrofit of Piping Systems July 2002 Seismic Design and Retrofit of Piping Systems AmericanLifelinesAlliance A public-private partnership to reduce risk to utility and transportation systems from natural hazards Seismic Design and Retrofit of Piping Systems July 2002 www.americanlifelinesalliance.org This report was written under contract to the American Lifelines Alliance, a public-private partnership between the Federal Emergency Management Agency (FEMA) and the American Society of Civil Engineers (ASCE). This report was reviewed by a team representing practicing engineers and academics. Seismic Design and Retrofit of Piping Systems Acknowledgements This report was prepared by George Antaki, Aiken, SC. Various parts of the report were reviewed by Ron Haupt, Pressure Piping Engineering Associates, Foster City, CA, John Minichiello, Framatome ANP DE&S, Naperville, IL, and Ed Wais, Wais & Associates, Atlanta, GA. July 2002 Page i Seismic Design and Retrofit of Piping Systems Table of Contents 1.0 INTRODUCTION.................................................................................................................. 1 1.1 Project Objective............................................................................................................................1 1.2 Project Scope..................................................................................................................................1
    [Show full text]
  • Standard Supports 2020 Standard Supports 2020 Date of Issue: June 2015
    Standard Supports 2020 Standard Supports 2020 Date of issue: June 2015 The LISEGA product program covers all components required for the implementation of modern concepts in the support of pipe systems. These components correspond to the LISEGA standardization philosophy and are organized in a modular system with load and attachment compatibility. Containing the complete product program, this catalog is in full compliance with LICAD, the LISEGA pipe support design program. The catalog and LICAD can be downloaded from www.lisega.de. LISEGA reserves the right to introduce revisions in the interest of further technical development. Standard Supports 2020 Performance with System Customers and their suppliers depend on each other for mutual success. We at LISEGA want to show ourselves to be partners of value to our customers with a comprehen- sive and effective performance package. We are prepared to provide top performance day in and day out. Our goal is customer satisfaction and only if we achieve that objective are we satisfied too – that’s where our motivation is coming from. Right from the beginning, some five decades ago, we have concentrated exclusively on pipe supports, thoroughly and comprehen- sively. The quality and efficient utilization of our products are just as important to us as our reliability and low application costs. (from left to right) Dr. Ekkehard Heinrichs, The basis is a well-engineered product program of more than 12,000 stand- Chief Technical Officer ardized support components forming a clearly arranged functional modular Hans-Herlof Hardtke, system. The resulting efficiency, and in particular by using our LICAD design Chairman of Supervisory Board Dr.
    [Show full text]
  • A Guide to the Selection, Application & Function of Pipe Hangers
    Pipe Supports Limited The Pipe Supports Group - Unit 22 West Stone A Global Solution A Guide to the Selection, Berry Hill Industrial Estate Droitwich Manufacturing & Sales Worcestershire Application & Function WR9 9AS Canada [email protected] United Kingdom China [email protected] India [email protected] t: +44 (0)1905 795500 of Pipe Hangers Thailand [email protected] f: +44 (0)1905 794126 UK [email protected] e: [email protected] USA - Woburn [email protected] USA - Louisiana [email protected] Pipe Supports Asia Ltd 26/5 Moo 9, Soi Rattanaraj Regional & International Sales Offices Bangna-Trad Km 18 China - Beijing [email protected] Bangchalong China - Guangdong [email protected] Bangplee China - Shanghai [email protected] Samut Prakarn 10540 France [email protected] Thailand India - Delhi [email protected] India - Mumbai [email protected] t: +66-2-312-7685 India - Chennai [email protected] f: +66-2-312-7710 Japan [email protected] e: [email protected] Korea [email protected] Middle East [email protected] S E Asia [email protected] Bergen-Power Pipe Supports, Inc. Taiwan [email protected] 225 Merrimac Street USA - Chicago [email protected] Woburn, MA 01801 USA - Houston [email protected] t: 781.935.9550 f: 781.938.0026 Bergen Pipe Supports (Jiangsu) Limited West end of Fuyang Rd Chennan Developing District Jingjiang City Jiangsu Province P.R.C www.pipesupports.com A Global Solution 20809 19/07/11 Proof 1 20809 19/07/11 Proof 1 OVER 100 YEARS’ EXPERIENCE, SUPPLYING POWER GENERATION, OIL, GAS, OFFSHORE, PETROCHEMICAL, PHARMACEUTICAL, CHEMICAL AND WATER INDUSTRIES WORLDWIDE Mission Statement.
    [Show full text]
  • SYGEF® PVDF Pressure Piping System Engineering Handbook
    SYGEF® PVDF Pressure Piping Engineering Handbook System 2 Table of Contents Material Characteristics General Information 5 Mechanical Properties 5 Chemical, Weathering and Abrasion Resistance 6 Thermal Properties 6 Flammability and Fire Rated Testing 6 Electrical Properties 7 Physiological Properties 7 Extractables 8 Discoloration Phenomena 8 Manufacturing Complete System of Pipe, Fittings and Valves 9 Compliance with Microelectronic Standards 9 Compliance with Life Science Standards 10 Raw Materials 10 Manufacturing (Pipe) 10 Manufacturing (Fittings/Valves) 11 Manufacturing (Fabricated Products) 12 Traceability of Machined Components 12 Delivery, Storage and Handling 12 General Properties - SYGEF® PVDF 13 SYGEF® Plus HP PVDF Specification - IR/BCF 14 SYGEF® Standard PVDF Specification - IR/BCF 17 SYGEF® Standard PVDF Specification - Socket 20 Pressure/Temperature Long-Term Stress 23 Working Temperature and Pressures for SYGEF® PVDF Pipe and Fittings 23 Dimensional Pipe Size Pipe Size Comparison 24 Calculating Pipe Size Friction Loss Characteristics 25 Hazen and Williams Formula 25 C Factors 25 Flow Rate vs Friction Loss - SYGEF® PVDF (PN16) 26 Flow Rate vs Friction Loss - SYGEF® PVDF (PN10) 30 Friction Loss Through Fittings 33 Gravity Drain Systems Flow Rate for Gravity Drain Systems 34 Surge Pressure (Water Hammer) Surge Pressure (Water Hammer) 35 Special Consideration 36 Expansion/Contraction Allowing for Length Changes in PVDF Pipelines 38 Calculation and Positioning of Flexible Sections 38 Determining the Length Change 39 Determining
    [Show full text]
  • Section 22 05 29 Hangers and Supports for Plumbing
    CHABOT - LAS POSITAS COMMUNITY COLLEGE DISTRICT TECHNICAL STANDARDS SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Pipe Hangers and Supports for Plumbing Piping and Equipment 2. Wall and Floor Sleeves 3. Building Attachments 4. Flashing 5. Miscellaneous Metal and Materials PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Pipe Hangers and Supports for Plumbing Piping and Equipment: 1. Pipe Hangers/Supports: a. B-Line Systems, Inc. b. Anvil International c. HOLDRITE d. Erico Co., Inc. e. Snappitz Thermal Pipe Shield Manufacturing f. Rilco Manufacturing Co. Inc. g. Nelson-Olson Inc. h. Or approved equivalent. 2. Channel Support Systems: a. B-Line Systems, Inc. b. Anvil International, Anvit-Strut c. Erico Hanger Co., Inc.; O-Strut Div. d. Unistrut Corp. e. HOLDRITE EZ-Strut Systems f. Or approved equivalent. 3. Thermal-Hanger Shield Inserts: a. Erico Hanger Co., Inc. b. Pipe Shields, Inc. c. Rilco Manufacturing Co., Inc. d. HOLDRITE Insulation Couplings e. Or approved equivalent. 4. Freestanding Roof Supports: a. Erico Hanger Co., Inc. b. Nelson-Olsen Inc. c. B-Line d. M. Fab e. Or approved equivalent. 5. Pipe Alignment and Secondary Supports: September 30, 2018 22 05 29 - Page 1 V.1 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT CHABOT - LAS POSITAS COMMUNITY COLLEGE DISTRICT TECHNICAL STANDARDS a. HOLDRITE b. Starquick c. Or approved equivalent. B. Wall and Floor Sleeves: 1. Below Grade and High Water Table Areas: a. Modular Link Sealing System at Pipe Sleeves: 1) Thunderline Corporation 2) Or approved equivalent. 2.
    [Show full text]
  • Pipehanger Designengineering
    April 2007 For the most current product/pricing information on Anvil products, please visit our website at www.anvilintl.com. Today Anvil® International is the largest and most complete fitting and hanger manufacturer in the world. 2004 Anvil® International acquires Star Pipe Products, Building and Construction Divisions (SPF) and forms AnvilStarTM Fire Products Division. 2001 Anvil® International acquires Merit® Manufacturing and Beck Manufacturing. 2000 The industry’s trusted manufacturer of pipe fittings, hangers and grooved fittings is renamed Anvil® International, Inc. TRUSTED 1999 Tyco sells the distribution and manufacturing FOR 150 YEARS operations known up to this point as ”Grinnell Supply Sales”, but keeps the Grinnell® trademark. We built our reputation from the ground up. Anvil’s history stretches back to the mid 1800s, when a company named Grinnell® began providing its customers with the finest quality pipe products. ™ ™ 1994 J.B. Smith and Catawissa join the Grinnell Since 2000, those quality products and services— Supply Sales and Manufacturing division. and the people who provide them—have been known as Anvil® International. Anvil® customers receive the quality and integrity that have been building strong connections in both products and business relationships for over 150 years. Focused Product Line: 1969 Grinnell Co. acquired by International Telephone ® ® and Telegraph. Two years later, ITT divests the Fire Anvil Malleable and Cast Gruvlok Couplings, Protection Division, but keeps the manufacturing Iron Fittings Fittings and Va lves and sales divisions that will become known as Anvil ® Hangers, Supports SP F TM Malleable and Cast ® Anvil International. and Struts and Ductile Iron Fittings Beck Welded Pipe Nipples SP F TM Grooved Fittings Anvil ® Seamless Pipe and O’Let s 1960 Gruvlok® line of grooved fittings is introduced.
    [Show full text]