Pipehanger Designengineering

Total Page:16

File Type:pdf, Size:1020Kb

Pipehanger Designengineering April 2007 For the most current product/pricing information on Anvil products, please visit our website at www.anvilintl.com. Today Anvil® International is the largest and most complete fitting and hanger manufacturer in the world. 2004 Anvil® International acquires Star Pipe Products, Building and Construction Divisions (SPF) and forms AnvilStarTM Fire Products Division. 2001 Anvil® International acquires Merit® Manufacturing and Beck Manufacturing. 2000 The industry’s trusted manufacturer of pipe fittings, hangers and grooved fittings is renamed Anvil® International, Inc. TRUSTED 1999 Tyco sells the distribution and manufacturing FOR 150 YEARS operations known up to this point as ”Grinnell Supply Sales”, but keeps the Grinnell® trademark. We built our reputation from the ground up. Anvil’s history stretches back to the mid 1800s, when a company named Grinnell® began providing its customers with the finest quality pipe products. ™ ™ 1994 J.B. Smith and Catawissa join the Grinnell Since 2000, those quality products and services— Supply Sales and Manufacturing division. and the people who provide them—have been known as Anvil® International. Anvil® customers receive the quality and integrity that have been building strong connections in both products and business relationships for over 150 years. Focused Product Line: 1969 Grinnell Co. acquired by International Telephone ® ® and Telegraph. Two years later, ITT divests the Fire Anvil Malleable and Cast Gruvlok Couplings, Protection Division, but keeps the manufacturing Iron Fittings Fittings and Va lves and sales divisions that will become known as Anvil ® Hangers, Supports SP F TM Malleable and Cast ® Anvil International. and Struts and Ductile Iron Fittings Beck Welded Pipe Nipples SP F TM Grooved Fittings Anvil ® Seamless Pipe and O’Let s 1960 Gruvlok® line of grooved fittings is introduced. Nipples J.B. Smith Swage Nipples Anvil ® Steel Pipe Couplings and Bull Plugs and Small Steel Fittings Catawiss a ® Wing Unions Meri t ® Tee-Lets and Drop and Check Valves 1919 General Fire Extinguisher Co. becomes Grinnell Co. Nipples 1909 Frederick Grinnell opens a foundry in Cranston, RI. Companies express interest in buying its piping products, laying the groundwork for what would become the Grinnell Supply Sales Division. It would be these manufacturing and sales operations that eventually become Anvil® International. 1850 Providence Steam & Gas Pipe Co. is formed, and Frederick Grinnell purchases a controlling interest. Grinnell® is a registered trademark of Grinnell Corporation, a Tyco International Ltd. company. BUILDING CONNECTIONS THAT LAST ANVIL BRANDS: ® PIPING and PIPE HANGER DESIGN and ENGINEERING WEIGHTS OF PIPING MATERIALS LOAD CALCULATION PROBLEM The material in this booklet has been compiled to furnish pipe The "Hanger Load Calculation Problem" is typical of the actual hanger engineers with the necessary data and procedures to steps required in the solution of any pipe hanger installation. determine pipe hanger loads and thermal movements of the pipe at each hanger location. Great care was taken in collecting and printing data in this The tabulation of weights has been arranged for convenient booklet to assure accuracy throughout. However, no selection of data that formerly consumed considerable time to representation or warranty of accuracy of the contents of this develop. In many instances this information was not available booklet is made by Anvil. The only warranties made by Anvil for general distribution. This made it necessary to develop are those contained in sales contracts for design services or average or approximate weights that may be substituted with products. actual weights whenever practical. CONTENTS .............................................................................. Page Design of Pipe Hangers ................................................................ 4 Determination of Hanger Locations............................................. 4 Hanger Load Calculations ............................................................ 6 Thermal Movement Calculations ............................................... 11 Selection of the Proper Hangers ................................................ 13 Typical Pipe Support Specification............................................ 21 Nuclear pipe Hangers.................................................................. 24 Seismic Supports ........................................................................ 24 Supports for Grooved Piping ..................................................... 27 Application Examples ................................................................. 30 Weights of Piping Materials ........................................................ 37 Charts and Tables........................................................................ 63 Copyright © 2003 Anvil International, North Kingstown, R.I. sales offices and warehouses on back cover www.anvilintl.com Anvil International, Piping & Pipe Hanger Design and Engineering 3 THE DESIGN OF PIPE HANGERS INTRODUCTION The steps in which the engineer applies this information are: To avoid confusion, it is necessary to define the terms pipe (1) Determine hanger locations. hanger and pipe support and clarify the difference between (2) Calculate hanger loads. the two. Pipe hangers are generally considered to be those (3) Determine thermal movement of the piping at each metal elements which carry the weight from above with the hanger location. supporting members being mainly in tension. Pipe supports are considered to be those elements which carry the weight (4) Select hanger types: spring assembly, either constant from below with the supporting members being mainly in support, variable spring type, rigid assembly, etc. compression. (5) Check clearance between the hanger components and nearby piping, electrical cable trays, conduits, ventilating It has become widely recognized that the selection and design ducts, and equipment. of pipe hangers is an important part of the engineering study of any modern steam generating or process installation. The final step will not be discussed to any great degree. This Problems of pipe design for high temperature, high pressure aspect of design is governed solely by the requirements and installations have become critical to a point where it is layouts of the individual job. Instead, attention will be devoted imperative that such aspects of design as the effect of to steps 1 to 4, where the scope of good hanger practice can concentrated hanger loads on building structure, pipe weight be generally defined for any installation. loads on equipment connections, and physical clearances of Recognizing that each new piping design presents many new the hanger components with piping and structure be taken challenges to the engineer, no attempt is made to state fixed into account at the early design stages of a project. rules and limits applicable to every hanger design. Rather, the Engineers specializing in the design of pipe hangers have intention is to illustrate ideas which will serve as a guide to a established efficient methods of performing the work required simple, practical solution to any pipe support problem. to arrive at appropriate hanger designs. However, the engineer who devotes varying portions of his time to the INTEGRAL ATTACHMENTS design of pipe hangers often must gather a considerable Integral attachments are fabricated so that the attachment is amount of reference data peculiar only to the hanger an integral part of the piping component. Examples of integral calculations for his current project. attachments include ears, shoes, lugs, cylindrical attachments, It is the purpose of this article to present a compilation of all rings and skirts. Integral attachments are used in conjunction information necessary for the design of hangers, including a with restraints or braces where multi-axial restraint in a single technical section devoted to the listing of piping material, member is required. Of particular importance is the localized weights, and thermal expansion data. Also, the discussions of stresses induced into the piping or piping component by the the various steps involved in designing supports, presented integral attachments. Several methods to determine the local here in their proper sequence, should serve as a good stresses are available including relatively simple hand/ reference source for the engineer who only occasionally cookbook calculations provided in Welding Research Council becomes involved in the essentials of hanger design. (WRC) Bulletins 107, 198, and 297, ASME Code Cases N-318 and N-392, or through a detailed finite element analysis. The first of these steps is that of determining and obtaining Section 121 of ASME B31.1 discusses additional consider- the necessary amount of basic information before proceeding ations for integral attachments. with calculations and detailing of the pipe supports. No design is complete unless the engineer has had the opportunity to HANGER SPANS review the equivalent of the following project data: Support locations are dependent on pipe size, piping • The pipe hanger specification, when available (A typical configuration, the location of heavy valves and fittings, and the hanger specification is shown on pages 21 and 22). structure that is available for the support of the piping. • A complete set of piping drawings. No firm rules or limits exist which will positively fix the location • A complete set of steel and structural drawings including
Recommended publications
  • Pipe Hanger Design & Engineering
    Pipe Hanger Design & Engineering For the most current product/ pricing information on ASC Engineered Solutions, please visit our website at asc-es.com. Today Anvil® International is the largest and most complete fitting and hanger manufacturer in the world. 2004 Anvil® International acquires Star Pipe Products, Building and Construction Divisions (SPF) and forms AnvilStarTM Fire Products Division. 2001 Anvil® International acquires Merit® Manufacturing and Beck Manufacturing. 2000 The industry’s trusted manufacturer of pipe fittings, hangers and grooved fittings is renamed Anvil® International, Inc. TRUSTED 1999 Tyco sells the distribution and manufacturing FOR 150 YEARS operations known up to this point as ”Grinnell Supply Sales”, but keeps the Grinnell® trademark. We built our reputation from the ground up. Anvil’s history stretches back to the mid 1800s, when a company named Grinnell® began providing its customers with the finest quality pipe products. ™ ™ 1994 J.B. Smith and Catawissa join the Grinnell Since 2000, those quality products and services— Supply Sales and Manufacturing division. and the people who provide them—have been known as Anvil® International. Anvil® customers receive the quality and integrity that have been building strong connections in both products and business relationships for over 150 years. Focused Product Line: 1969 Grinnell Co. acquired by International Telephone ® ® and Telegraph. Two years later, ITT divests the Fire Anvil Malleable and Cast Gruvlok Couplings, Protection Division, but keeps the manufacturing Iron Fittings Fittings and Va lves and sales divisions that will become known as Anvil ® Hangers, Supports SP F TM Malleable and Cast ® Anvil International. and Struts and Ductile Iron Fittings Beck Welded Pipe Nipples SP F TM Grooved Fittings Anvil ® Seamless Pipe and O’Let s 1960 Gruvlok® line of grooved fittings is introduced.
    [Show full text]
  • US EPR Piping Analysis and Pipe Support Design Topical Report
    ANP-10264NP Revision 1 U.S. EPR Piping Analysis and Pipe Support Design Topical Report May 2010 AREVA NP Inc. Non-Proprietary (c) 2010 AREVA NP Inc. Copyright © 2010 AREVA NP Inc. All Rights Reserved AREVA NP Inc. ANP-10264NP Revision 1 U.S. EPR Piping Analysis and Pipe Support Design Topical Report Page i Nature of Changes Revision 0 Section(s) Item or Page(s) Description and Justification 1. All This is a new document Revision 1 Section(s) Item or Page(s) Description and Justification 1. 2-1 Section 2.1 Changed references to the 2001 edition of the ASME Code, 2003 Addenda to the 2004 edition 3-9, Section 3.8.1 of the ASME Code (no addenda) in response to 3-27, Table 3-2 U.S. EPR FSAR RAI 365. 8-1, Section 8.0 2. 2-2, Section 2.2 Added a note that code cases N-122-2, N-318-5, N-391-2, and N-392-3 have been incorporated into the 2004 edition of the ASME Code (no addenda) in response to U.S. EPR FSAR RAI 365. Revision 1 incorporates the items identified above. The remainder of the document retains approved status associated with the Revision 0 SER. AREVA NP Inc. ANP-10264NP Revision 1 U.S. EPR Piping Analysis and Pipe Support Design Topical Report Page ii Contents Page 1.0 INTRODUCTION ............................................................................................... 1-1 2.0 CODES AND STANDARDS.............................................................................. 2-1 2.1 ASME Boiler and Pressure Vessel Code................................................ 2-1 2.2 ASME Code Cases................................................................................. 2-1 2.3 Design Specification ..............................................................................
    [Show full text]
  • Pipe Supports
    FAQs Pipe Supports Q What does CTS mean and how does it affect the size of the pipe support selected? A CTS is an acronym for Copper Tube Size. Oatey supports are sized based on CTS. For example; 1/2" CTS piping used in plumbing applications actually has a 5/8" outside diameter (OD), but is referred to as 1/2" pipe. 3/4" CTS piping used in same application has a 7/8" OD, but is referred to as 3/4" pipe. Pipe classified as IPS or Iron Pipe Size will have larger ODs than CTS and HVAC pipe ODs are smaller than CTS. Q Is a plastic hanger strap approved for supporting pipes? A No. A plastic hanger strap should only be used for temporary or non-load bearing applications. It can also be used as a mid-level strapping where required by code. Q What pipe support product should be used for water lines passing through metal stud framing? A Metal Stud Insulating Pipe Clamps. These are available for 1/2", 3/4" and 1" pipe sizes. Q Are any of the plastic pipe support clamps approved for use with hydronic systems? A Yes. All Oatey plastic pipe supports are approved for this application, but you should confirm the maximum temperature that the pipes will reach when in use. With the exception of the DuoFit Pipe Clamps rated from 0°F to 230°F and the Stand-Off Half Clamps rated from -60°F to 160°F, all other Oatey plastic straps are rated from 0°F to 180°F.
    [Show full text]
  • Pvc Piping Systems for Commercial and Industrial Applications
    PVC PIPING SYSTEMS FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS Plastic Pipe and Fittings Association © 2012 Plastic Pipe and Fittings Association (PPFA) Acknowledgments We would like to thank the following contributors to the Design Guide: The PVC and Thermoplastic Industrial Piping Systems (TIPS) Product Line Committees and member companies of the Plastic Pipe and Fittings Association (PPFA). In particular the following PPFA companies and individuals ably assisted in reviewing the text and tables and provided valuable comments which added greatly in producing a better and more accurate source document: Chuck Bush – Oatey Company Mike Cudahy – PPFA Staff Patrick Fedor – IPEX Bill Morris – Charlotte Pipe & Foundry Jack Roach – Mueller Industries Bill Weaver – Harvel Plastics Larry Workman – LASCO Fittings All text, tables and photos were prepared and or edited by David A. Chasis of Chasis Consulting, Inc. Using the Design Guide The Design Guide was created to assist engineers, installers, end-users, engineering students and building code officials in learning more of the dos and don’ts of PVC piping systems. The Design Guide is comprised of ten sections including: Introduction Features and Benefits Engineering Design Joining Methods Installation Testing and Repair Applications Building Codes, Standards, and Sample Specifications PVC Piping and the Environment Other Plastic Piping Systems In addition, in the back of the guide is the most complete appendix and glossary of PVC piping systems ever assembled. Other PPFA Educational Materials The PPFA offers a wide range of other educational materials developed to assist the engineering and construction industry to become more proficient in the use of the preferred piping system...plastics! On-site seminars, Webinars, CD-based seminars, workbooks, online tutorials and product and technical literature are available.
    [Show full text]
  • Review of Stress Analysis Results According to Decoupling Criteria Change and Suggestion of Alternative Solution
    18th International Conference on Structural Mechanics in Reactor Technology (SMiRT 18) Beijing, China, August 7-12, 2005 SMiRT18-F05-6 REVIEW OF STRESS ANALYSIS RESULTS ACCORDING TO DECOUPLING CRITERIA CHANGE AND SUGGESTION OF ALTERNATIVE SOLUTION Joong-Kyo Shin * Kyoung-Mo Yang Korea Power Engineering Company, inc. Korea Power Engineering Company, inc. 360-9 Mabuk-ri, Guseong-eup, Yongin-si, 360-9 Mabuk-ri, Guseong-eup, Yongin-si, Gyeonggi-do, 449-713, Korea Gyeonggi-do, 449-713, Korea Phone: 82-31-289-3737, Phone: 82-31-289-3636, Fax: 82-31-289-4109 Fax: 82-31-289-4105 E-mail: jkshin@kopec.co.kr E-mail: kmyang@kopec.co.kr ABSTRACT For OPR 1000(Optimized Power Reactor 1000) which was called as KSNP(Korean Standard Nuclear Plant), if moment-of-inertia ratio of run to branch pipe (Ir/Ib) is larger than 7 to 1, or diameter ratio of the run to the branch pipe (Dr/Db) is larger than 3 to 1, the branch pipe could be decoupled from the run pipe in piping stress analyses. But, EPRI URD and WRC Bulletin 300 criteria, Ir/Ib ≥ 25, are more difficult to accommodate the design sequence and designers’ convenience, than Ir/Ib ≥ 7. If the branch pipe, branching off the run pipe, cannot be decoupled in a piping stress analysis according to the criterion, Ir/Ib ≥ 25, the design sequence of the branch pipe should be parallel with that of the run pipe. However, in general, the design process for run pipe always precedes the process for the branch pipe, because the works for run pipe closely interfaces with other works such as calculation of penetration loads and size of embedded plate for the pipe support design.
    [Show full text]
  • Hangers and Supports for Plumbing Piping and Equipment
    Sharonville Fire Station 87 November 2019 SECTION 220529 - HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUBMITTAL REQUIRMENTS A. Product Data: For each type of product. 1. Include construction details, rated capacities, material descriptions, dimensions of individual components and profiles, and finishes. 2. Clearly state model numbers on all submittals. 1.2 PERFORMANCE REQUIREMENTS A. Delegated Design: Design trapeze pipe hangers and equipment supports, including comprehensive engineering analysis by a qualified professional engineer, using performance requirements and design criteria indicated. B. Structural Performance: Hangers and supports for plumbing piping and equipment shall withstand the effects of gravity loads and stresses within limits and under conditions indicated according to ASCE/SEI 7. 1. Design supports for multiple pipes, including pipe stands, capable of supporting combined weight of supported systems, system contents, and test water. 2. Design equipment supports capable of supporting combined operating weight of supported equipment and connected systems and components. PART 2 - PRODUCTS 2.1 METAL PIPE HANGERS AND SUPPORTS A. Carbon-Steel Pipe Hangers and Supports: 1. Description: MSS SP-58, Types 1 through 58, factory-fabricated components. 2. Galvanized Metallic Coatings: Pregalvanized or hot dipped. 3. Padded Hangers: Hanger with fiberglass or other pipe insulation pad or cushion to support bearing surface of piping. 4. Hanger Rods: Continuous-thread rod, nuts, and washer made of carbon or stainless steel. B. Copper Pipe Hangers: 1. Description: MSS SP-58, Types 1 through 58, copper-coated-steel, factory- fabricated components. Hangers and Supports for Plumbing Piping and Equipment 220529 - 1 Sharonville Fire Station 87 November 2019 2.
    [Show full text]
  • Guideline for the Seismic Design and Retrofit of Piping Systems, 2002
    Seismic Design and Retrofit of Piping Systems AmericanLifelinesAlliance A public-private partnership to reduce risk to utility and transportation systems from natural hazards Seismic Design and Retrofit of Piping Systems July 2002 Seismic Design and Retrofit of Piping Systems AmericanLifelinesAlliance A public-private partnership to reduce risk to utility and transportation systems from natural hazards Seismic Design and Retrofit of Piping Systems July 2002 www.americanlifelinesalliance.org This report was written under contract to the American Lifelines Alliance, a public-private partnership between the Federal Emergency Management Agency (FEMA) and the American Society of Civil Engineers (ASCE). This report was reviewed by a team representing practicing engineers and academics. Seismic Design and Retrofit of Piping Systems Acknowledgements This report was prepared by George Antaki, Aiken, SC. Various parts of the report were reviewed by Ron Haupt, Pressure Piping Engineering Associates, Foster City, CA, John Minichiello, Framatome ANP DE&S, Naperville, IL, and Ed Wais, Wais & Associates, Atlanta, GA. July 2002 Page i Seismic Design and Retrofit of Piping Systems Table of Contents 1.0 INTRODUCTION.................................................................................................................. 1 1.1 Project Objective............................................................................................................................1 1.2 Project Scope..................................................................................................................................1
    [Show full text]
  • Standard Supports 2020 Standard Supports 2020 Date of Issue: June 2015
    Standard Supports 2020 Standard Supports 2020 Date of issue: June 2015 The LISEGA product program covers all components required for the implementation of modern concepts in the support of pipe systems. These components correspond to the LISEGA standardization philosophy and are organized in a modular system with load and attachment compatibility. Containing the complete product program, this catalog is in full compliance with LICAD, the LISEGA pipe support design program. The catalog and LICAD can be downloaded from www.lisega.de. LISEGA reserves the right to introduce revisions in the interest of further technical development. Standard Supports 2020 Performance with System Customers and their suppliers depend on each other for mutual success. We at LISEGA want to show ourselves to be partners of value to our customers with a comprehen- sive and effective performance package. We are prepared to provide top performance day in and day out. Our goal is customer satisfaction and only if we achieve that objective are we satisfied too – that’s where our motivation is coming from. Right from the beginning, some five decades ago, we have concentrated exclusively on pipe supports, thoroughly and comprehen- sively. The quality and efficient utilization of our products are just as important to us as our reliability and low application costs. (from left to right) Dr. Ekkehard Heinrichs, The basis is a well-engineered product program of more than 12,000 stand- Chief Technical Officer ardized support components forming a clearly arranged functional modular Hans-Herlof Hardtke, system. The resulting efficiency, and in particular by using our LICAD design Chairman of Supervisory Board Dr.
    [Show full text]
  • A Guide to the Selection, Application & Function of Pipe Hangers
    Pipe Supports Limited The Pipe Supports Group - Unit 22 West Stone A Global Solution A Guide to the Selection, Berry Hill Industrial Estate Droitwich Manufacturing & Sales Worcestershire Application & Function WR9 9AS Canada BPC@PipeSupports.com United Kingdom China PSC@PipeSupports.com India BPSI@PipeSupports.com t: +44 (0)1905 795500 of Pipe Hangers Thailand PSA@PipeSupports.com f: +44 (0)1905 794126 UK PSL@PipeSupports.com e: PSL@pipesupports.com USA - Woburn BPW@PipeSupports.com USA - Louisiana CP@PipeSupports.com Pipe Supports Asia Ltd 26/5 Moo 9, Soi Rattanaraj Regional & International Sales Offices Bangna-Trad Km 18 China - Beijing PSCB@PipeSupports.com Bangchalong China - Guangdong PSCG@PipeSupports.com Bangplee China - Shanghai PSCS@PipeSupports.com Samut Prakarn 10540 France PSF@PipeSupports.com Thailand India - Delhi BPSD@PipeSupports.com India - Mumbai BPSM@PipeSupports.com t: +66-2-312-7685 India - Chennai BPSC@PipeSupports.com f: +66-2-312-7710 Japan PSJ@PipeSupports.com e: PSA@pipesupports.com Korea PSK@PipeSupports.com Middle East PSME@PipeSupports.com S E Asia PSS@PipeSupports.com Bergen-Power Pipe Supports, Inc. Taiwan PST@PipeSupports.com 225 Merrimac Street USA - Chicago PSU@PipeSupports.com Woburn, MA 01801 USA - Houston BPH@PipeSupports.com t: 781.935.9550 f: 781.938.0026 Bergen Pipe Supports (Jiangsu) Limited West end of Fuyang Rd Chennan Developing District Jingjiang City Jiangsu Province P.R.C www.pipesupports.com A Global Solution 20809 19/07/11 Proof 1 20809 19/07/11 Proof 1 OVER 100 YEARS’ EXPERIENCE, SUPPLYING POWER GENERATION, OIL, GAS, OFFSHORE, PETROCHEMICAL, PHARMACEUTICAL, CHEMICAL AND WATER INDUSTRIES WORLDWIDE Mission Statement.
    [Show full text]
  • SYGEF® PVDF Pressure Piping System Engineering Handbook
    SYGEF® PVDF Pressure Piping Engineering Handbook System 2 Table of Contents Material Characteristics General Information 5 Mechanical Properties 5 Chemical, Weathering and Abrasion Resistance 6 Thermal Properties 6 Flammability and Fire Rated Testing 6 Electrical Properties 7 Physiological Properties 7 Extractables 8 Discoloration Phenomena 8 Manufacturing Complete System of Pipe, Fittings and Valves 9 Compliance with Microelectronic Standards 9 Compliance with Life Science Standards 10 Raw Materials 10 Manufacturing (Pipe) 10 Manufacturing (Fittings/Valves) 11 Manufacturing (Fabricated Products) 12 Traceability of Machined Components 12 Delivery, Storage and Handling 12 General Properties - SYGEF® PVDF 13 SYGEF® Plus HP PVDF Specification - IR/BCF 14 SYGEF® Standard PVDF Specification - IR/BCF 17 SYGEF® Standard PVDF Specification - Socket 20 Pressure/Temperature Long-Term Stress 23 Working Temperature and Pressures for SYGEF® PVDF Pipe and Fittings 23 Dimensional Pipe Size Pipe Size Comparison 24 Calculating Pipe Size Friction Loss Characteristics 25 Hazen and Williams Formula 25 C Factors 25 Flow Rate vs Friction Loss - SYGEF® PVDF (PN16) 26 Flow Rate vs Friction Loss - SYGEF® PVDF (PN10) 30 Friction Loss Through Fittings 33 Gravity Drain Systems Flow Rate for Gravity Drain Systems 34 Surge Pressure (Water Hammer) Surge Pressure (Water Hammer) 35 Special Consideration 36 Expansion/Contraction Allowing for Length Changes in PVDF Pipelines 38 Calculation and Positioning of Flexible Sections 38 Determining the Length Change 39 Determining
    [Show full text]
  • Section 22 05 29 Hangers and Supports for Plumbing
    CHABOT - LAS POSITAS COMMUNITY COLLEGE DISTRICT TECHNICAL STANDARDS SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Pipe Hangers and Supports for Plumbing Piping and Equipment 2. Wall and Floor Sleeves 3. Building Attachments 4. Flashing 5. Miscellaneous Metal and Materials PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Pipe Hangers and Supports for Plumbing Piping and Equipment: 1. Pipe Hangers/Supports: a. B-Line Systems, Inc. b. Anvil International c. HOLDRITE d. Erico Co., Inc. e. Snappitz Thermal Pipe Shield Manufacturing f. Rilco Manufacturing Co. Inc. g. Nelson-Olson Inc. h. Or approved equivalent. 2. Channel Support Systems: a. B-Line Systems, Inc. b. Anvil International, Anvit-Strut c. Erico Hanger Co., Inc.; O-Strut Div. d. Unistrut Corp. e. HOLDRITE EZ-Strut Systems f. Or approved equivalent. 3. Thermal-Hanger Shield Inserts: a. Erico Hanger Co., Inc. b. Pipe Shields, Inc. c. Rilco Manufacturing Co., Inc. d. HOLDRITE Insulation Couplings e. Or approved equivalent. 4. Freestanding Roof Supports: a. Erico Hanger Co., Inc. b. Nelson-Olsen Inc. c. B-Line d. M. Fab e. Or approved equivalent. 5. Pipe Alignment and Secondary Supports: September 30, 2018 22 05 29 - Page 1 V.1 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT CHABOT - LAS POSITAS COMMUNITY COLLEGE DISTRICT TECHNICAL STANDARDS a. HOLDRITE b. Starquick c. Or approved equivalent. B. Wall and Floor Sleeves: 1. Below Grade and High Water Table Areas: a. Modular Link Sealing System at Pipe Sleeves: 1) Thunderline Corporation 2) Or approved equivalent. 2.
    [Show full text]
  • Table of Contents Page 1 of 2
    Table of Contents Page 1 of 2 1. Introduction Micromold Products at a Glance 2. Piping Systems & Accessories 2.1 FLUOR-O-FLO® NPT Threaded Piping System - PTFE 2.2 FLUOR-O-FLO® Tank Adapters (Bulkhead Fittings) - PTFE & PVDF 2.3 FLUOR-O-FLO® Manifolds - PTFE 2.4 FLUOR-O-FLO® Cam-Lock, Quick-Connect Coupling - PTFE 2.10 FLUOR-O-FLO® XPress Clamp-Joint Piping System - PTFE 3. Valves 3.1 FLUOR-O-FLO® Plug Valves - PTFE 4. Strainers 4.1 FLUOR-O-FLO® Y-Strainers - PVDF & PTFE 4.2 FLUOR-O-FLO® Basket Strainers - PVDF & PTFE 4.3 FLUOR-O-FLO® Baffle Strainers - PTFE, PVDF & PPL 4.4 Strainer Replacement Parts 4.9 Technical Bulletin - Strainer Screens 5. Lined Pipe Accessories 5.1 FLUOR-O-FLO® Dip Pipes & Spargers - PTFE Lined and Jacketed Steel 5.2 FLUOR-O-FLO® Dip Pipes, Spargers & Steam Jets - Solid Plastic 5.3 FLUOR-O-FLO® Mixing Tee Injection Nozzles - PTFE 5.4 FLUOR-O-FLO® Thermowells - PTFE or PVDF Jacketed Carbon Steel, Tantalum Tipped 5.5 FLUOR-O-FLO® Thermowells - Solid Plastic 5.6 FLUOR-O-FLO® Nozzle Liners - PTFE 5.7 FLUOR-O-FLO® Tri-Clamp Sanitary Dip Tubes and Spargers 6. Tanks 6.1 Cylindrical or Rectangular Tanks - PTFE, PFA, PVDF 7. Spacers, Flanges & Gaskets 7.1 FLUOR-O-FLO® Spacers and Flanges - PTFE, PVDF, also PPL, CPVC 7.2 FLUOR-O-FLO® Armored Spacers - PTFE, PVDF, also PPL, CPVC 7.3 FLUOR-O-FLO® PTFE Lined Steel Straight-Bore Reducing Flanges 7.4 FLUOR-O-FLO® Spectacle Line-Blinds - PTFE Lined Steel and Solid Plastic PTFE, also PVDF, PPL 7.5 FLUOR-O-FLO® Filler Flanges/Compensation Rings - PTFE 7.20 FLUOR-O-FLO® Gaskets - PTFE MICROMOLD PRODUCTS, INC.
    [Show full text]