CIGS-2000A1 Series High Performance CIGS Thin Film Modules MAX SYSTEM 1000V CIGS MODULES

CIGS Competitive Advantages ＞ PID-free, LID-free ＞ No microcrack problem ＞ Less solder joints than c-Si ＞ No glint/glare problem ＞ Low shadow impact ＞ RoHS compliant ＞ Free of Lead, Cadmium, Tellurium, Arsenic

Linear Pmax. Performance Warranty 105 Temperature Range under Typical Field Operating 100% 100 Power stable for First ear

95% 95

Linear 80% for 25 ears 90% 90 (0.8% per year)

85% 85 More Power Gain By Eterbright CIGS PV PercentofRated Watts 80% 80 DC Power Output Relative to Power at STC (%) 75% 75 0 5 10 15 20 25 25 30 35 40 45 50 55 60 65 70 75 80 85 Warranty Period (ears) Module temperature (°C) Mono c-Si PV(-0.41%/°C) Conventional CIGS PV(-0.31%/°C) Eterbright CIGS PV(-0.28%/°C) The Comparison of Normalized Efficiency Lowest Temperature Coefficient (-0.28%/°C) between Eterbright CIGS and Others

105 110% Temperature Range under Typical Field Operating 100 105%

95 100%

90 95%

85 Normalized Efficiency More Power Gain By Eterbright CIGS PV 90% 80 DC Power Output Relative to Power at STC (%) STC at Power to Relative Output DC Power 75 85% 25 30 35 40 45 50 55 60 65 70 75 80 85 0 100 200 300 400 500 600 700 800 900 1000 Irradiance (W/m2) Module temperature (°C) a -Si (PVSST Default) CdTe (PVSST Default) Mono c-Si PV(-0.41%/°C) Conventional CIGS PV(-0.31%/°C) c-Si PV (Measured by ITRI) Conventional CIGS PV Eterbright CIGS PV(-0.28%/°C) Eterbright CIGS PV (Measured by ITRI)

In tropical areas i.e. desert regions, equatorial regions, subtropical Eterbright CIGS PV performs better normalized efficiency under regions or high temperature areas, CIGS module will be the only choice. lower irradiance. 110%

105%

100%

95% Normalized Efficiency

90%

85% 0 100 200 300 400 500 600 700 800 900 1000 Irradiance (W/m2) a -Si (PVSST Default) CdTe (PVSST Default) c-Si PV (Measured by ITRI) Conventional CIGS PV Eterbright CIGS PV (Measured by ITRI) Mechanical Specification Module4-8.5x18.5 Drawing mounting holes

Dimensions 1275mm x 1236mm x 40mm 6-5 grounding holes (50.2 inches x 48.7 inches x 1.57 inches) 4-8.5x18.5 mounting holes Weight 23 kg (50.71lbs) Cell type CIGS thin film 6-5 grounding holes Front cover 2.5mm tempered glass with ARC Label Cable 1200mm Cell substrates 1.8mm ultra-thin soda lime glass x 2 Back cover Al back sheet Encapsulant EVA Label Frame Anodized Al frame (black) with screw mounting Cable 1200mm 749mm 97.5mm

Junction Box IP67 rated with bypass diode 4-3 drainage holes Connectors MC4 compatible Cable length 1200 mm (47.2 inches) 97.5mm 40mm 749mm

4-3 drainage holes Electrical Specification

Power performance at STC (STC: 1000W/m², 25°C/77°F, AM 1.5)* 40mm

Module Models CIGS- 2150A1 2200A1 2250A1 2300A1 2350A1 2400A1

Nominal power PMPP [W] 215 220 225 230 235 240 1236mm(+3/-2) Open circuit voltage VOC [V] 73.1 73.3 73.6 73.8 74.0 74.1

Short circuit current ISC [A] 4.45 4.46 4.49 4.50 4.64 4.64

Voltage at Pmax VMPP [V] 55.5 56.2 56.4 57.1 55.9 57.0

Current at Pmax IMPP [A] 3.87 3.91 3.99 4.03 4.21 4.21 1236mm(+3/-2) Module efficiency [%] ≧1 3.6 ≧1 4.0 ≧1 4.3 ≧1 4.6 ≧1 4.9 ≧1 5.2

Power performance at NMOT (NMOT: 800W/m². 20°C/68°F, AM1.5)* 1275mm(+3/-2) Module Models CIGS- 2150A1 2200A1 2250A1 2300A1 2350A1 2400A1 5 250 Nominal power PMPP [W] 158.5 162.4 166.1 170.0 173.3 177.3 IV-1000W 4.5 Open circuit voltage VOC [V] 68.7 68.9 69.2 69.4 69.6 69.7 IV-800W 4 200 1275mm(+3/-2) Short circuit current ISC [A] 3.56 3.57 3.59 3.60 3.71 3.71 IV-600W 3.5 IV-400W Voltage at Pmax VMPP [V] 51.2 51.9 52.1 52.8 351.5 52.6 150 IV-200W Current at Pmax IMPP [A] 3.10 3.13 3.19 3.22 2.53.37 3.37 Power-1000W *All STC characteristics are measured after pre-treatment of 43kWh/m2 light2 soaking.The nominal power is100 based on the measurement value of Power [W] Current [A] Power-800W stabilized product. The value applies to measurement uncertainty: Pmax1.5 : +5%/-3% ; Isc, Voc, Imax, Vmax : ±10%. Power-600W 1 50 Temperature coefficients Properties 0.5for solar system construction designPower-400W 0 0 Power-200W Max. system Max. series Mechanical Safety Operating NMOT TC ISC (α) TC VOC (β) TC PMPP(δ) 0overcurrent 10 20 30 40 50 60 70 80 Fire rating voltage (VSYS) load class temperature protective devicesVoltage [V] 46°C +0.01%/°C -0.27%/°C -0.28%/°C Class C(IEC) 1000V 8A 2400Pa II -40 ~ 85°C Type 1(UL) I-V curves at various irradiation 5 250 I-V curves at various temperature IV-1000W 4.5 5 250 IV-800W 10°C I-V 4 200 4.5 IV-600W 25°C I-V 3.5 4 200 40°C I-V IV-400W 3.5 3 150 55°C I-V IV-200W 3 150 2.5 70°C I-V Power-1000W 2.5 2 100 10°C Power Power [W] Power Current [A] Current Current [A] Current

Power-800W 2 100 [W] Power 1.5 25°C Power Power-600W 1.5 1 50 40°C Power Power-400W 1 50 0.5 55°C Power Power-200W 0.5 0 0 70°C Power 0 10 20 30 40 50 60 70 80 0 0 0 20 40 60 80 Voltage [V] Voltage [V] *This datasheet is for informational purposes only. No rights can be derived from the information contained herein. *The color of each individual product might be slightly different but does not affect the output power performance.

5 250 351苗栗縣頭份市中華路442-1號 上銀光電股份有限公司 10°C I-V 4.5 No. 442-1, Zhonghua Rd., Toufen City, Miaoli County 351, Taiwan Tel : +886-37-62766825°C I-V Fax : +886-37-627778 eterbright4 solar corp. 200 @ ©2019 FORM PD02E01-1902 www.eterbright.tw40°C I-V info eterbright.tw 3.5 (PRINTED IN TAIWAN) 55°C I-V 3 150 70°C I-V 2.5 10°C Power Current [A]

2 100 Power [W] 25°C Power 1.5 40°C Power 1 50 55°C Power 0.5 70°C Power 0 0 0 20 40 60 80 Voltage [V]