ENGLISH
AT100 INSTALLATION & USER MANUAL
D28005ARS141-XXX - ELECTRONIC BIDET SEAT-CWH
Canvas White (415)
Thank you for purchasing this product.
After reading this manual, please keep it in a place where you can refer to it easily.
BE SURE TO FOLLOW THE SAFETY PRECAUTIONS.
Failure to follow the safety precautions may result in serious accidents in some circumstances.
Each of these items are extremely important for safety, and should be strictly observed.
In the event that an accident occurs as a result of improper usage, DXV by American Standard will assume no responsibility for damages.
©2014 AS America Inc. TABLE OF CONTENTS
1. Important Safeguards...... 3
2. Product Description...... 6
3. Installing This Product...... 7 Installation Requirements...... 7 Contents...... 7 Ground Fault Circuit Breaker...... 8 Power Supply...... 8 Grounding...... 8 Installation Location...... 8 Water Supply...... 8 Checking the Bathroom...... 8 Checking the Toilet...... 9 Illustrated Parts Breakdown...... 10 Overview...... 10 Indicator Panel...... 10 Filter...... 10 Operating Panel...... 11 Warm Water Tank Drain Plug...... 11 Mounting Plate...... 11 Installation...... 12 Operational Check...... 18
4. Using This Product...... 21
2 1. Important Safeguards When using electrical products, especially when children are present, the basic safety precautions should always be observed.
READ ALL THE INSTRUCTIONS BEFORE USING THIS PRODUCT
The following safety terms are used in this manual to warn against different hazardous situations: DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in damage to the product or other property.
DANGER To reduce the risk of electric shock: 1. Have a professional install this product. 2. Install a secure ground connection, following the grounding instructions (see page 8) 3. Do not place or store product where it can fall or be pulled into a tub or sink. 4. Do not place on or drop into water or any other liquid. 5. Do not pour water or cleanser inside this product. Do not splash water or cleanser on the body or the power plug. 6. Do not reach for a product that has fallen into water. Unplug immediately. 7. Do not allow anyone except an authorized service technician to disassemble, repair or modify this product. If repairs are necessary, contact our company.
WARNING To reduce the risk of burns, electrocution fire, or injury to persons: 1. When small children, elderly persons, persons with limited mobility or people with illness are using this product, ensure that the proper operating procedures are followed at all times to ensure the user's safety. 2. When you are using this product for a long period of time, set the seat temperature to "Off". For the following persons, be sure to set the seat temperature to "Off" when they are using this product. (Children, elderly persons, persons with illness, persons with limited mobility, persons with sensitive skin, persons who are taking medicines that cause drowsiness, persons who are intoxicated, or persons who are extremely fatigued.) * Using the toilet for a long period of time without setting the seat temperature to "Off" may result in low temperature burns.
3 Low Temperature Burns A low temperature burn may occur when the skin has been in contact for some time with an object at relatively low temperature (about 104 °F [40 °C]). Susceptibility to burns also depends on an individual's skin sensitivity and other factors. 3. This product should be used only as described in this manual. Do not use attachments that are not recommended by the manufacturer. 4. Never operate this product if it has a damaged cord or plug, if the plug is loose in the outlet, if it is not working properly, or if it has been dropped or damaged. Please contact our company for instructions on resolving any of the above issues. 5. Keep the cord away from heated surfaces. (Example: Panel Heater) 6. Never block the air openings of the product. If lint or hair, etc. is stuck in the air openings, remove it immediately. 7. Never use while sleeping or feeling drowsy. 8. Never drop or insert any object into any opening or hose. 9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. 10. Connect this product to a properly grounded outlet only. See Grounding Instructions. 11. This product should only be connected to a potable water supply line. Failure to do so will cause problems in the operation. 12. Do not pull out or insert the power plug with wet hands. 13. Disconnect the power plug periodically and clean it with a dry cloth. Dust accumulated on the power plug may cause fire.
CAUTION To reduce the risk of minor injury or property damage: 1. This product should only be connected to a 120 V AC, 60 Hz GFCI-protected outlet. 2. Be sure to set the dry temperature to "Lo" when the following persons use the toilet. (Children, elderly persons, persons with illness, persons with limited mobility, persons with sensitive skin, persons who are taking medicines that cause drowsiness, persons who are intoxicated, or persons who are extremely fatigued.) * If the dryer is used for a long period of time on a setting higher than "Lo", the user may risk a low temperature burn. For this reason, our company recommends setting the dryer temperature to "Lo" during use.
4 3. For care of the plastic parts, our company recommends the use of a mild, liquid, all-purpose cleaner. Avoid using abrasive products (such as powdered cleansers) and chlorine-based products (such as bleach), as these products can damage the anti-bacterial properties of the plastic components. 4. If the toilet seat or the body cover is damaged, pull the power plug out of the outlet and contact our company to request repairs. 5. Do not stand on the toilet seat lid, as it may break. 6. Do not lean back against the lid during use, as this may damage or break the lid. 7. Install this product according to this installation manual. Improper installation may result in electrocution, fire, or a water leak. 8. If it is necessary to change the electrical wiring or plumbing (including items for which installation is not restricted, such as a ground fault circuit breaker), have an electrician or plumber who has undergone training in accordance with federal, state or local laws and regulations and has obtained the proper license, perform the required construction work. 9. If you will not be using this product for an extended period of time, close the water shutoff valve and drain the water from the toilet. In addition, disconnect the power plug from the outlet. 10. Avoid using front and rear cleansing functions excessively or for long periods of time as such overuse may increase the possibility of washing away desirable resident bacteria and causing an imbalance of bacteria in your body. If you are pregnant, are being treated for a gynecological condition, develop excessive irritation in the area of use, or if you have questions, please speak to your doctor before beginning or continuing use of the product.
SAVE THESE INSTRUCTIONS
5 2. Product Description This product incorporates a set of features to improve personal toilet hygiene and comfort. These features include rear cleansing, front cleansing, a warm air dryer and a seat heater as well as the required controls for these features. This product includes a seat unit (with heated toilet seat, toilet seat lid, warm water tank, and power cord), hardware for installing the seat unit on a toilet and connecting it to the water supply and this installation and user's manual.
This product incorporates the following features:
• rear cleansing with water flow strength controls • front cleansing with water flow strength controls • warm air dryer with air temperature controls • seat heater with heat level control • rear and front cleansing water temperature control • seat and water temperature indicators • rear and front nozzle self-cleaning • stop button for rear cleansing, front cleansing and dryer
Note: • When transporting the product, take care not to inadvertently bump or drop it. • This product has been already inspected using tap water. A small amount of water may be detected when installing the unit; this should not be a cause for concern.
6 3. Installing This Product Installation Requirements
Before installing this product, ensure that each of the following installation Installing This Product requirements are met.
Contents
Remove the parts from the box and make sure all the parts in the parts list (below) are present. Inspect the parts carefully to make sure they are in good condition. If any part is damaged or missing, do not install this product. Contact the nearest customer service representative for the part(s) you need.
The following parts are included:
• Seat unit (with heated toilet seat, toilet seat lid and power cord) • Mounting plate • Manual set • Mounting bolts, washers, and bushings (2 pieces each) • Junction fitting (with a packing) • Seat unit water supply hose (with 2 clips) • Remote control • Bracket • Batteries Using This Product • Wood screw • Plastic anchors
*Remote control unit and bracket are packed in the box.
Remote control unit Bracket
Seat unit For remote control unit Batteries (2) Wood screws
Plastic anchors
Manual set Junction fitting Mounting plate (This plate attaches to the seat unit.)
Packing Mounting bolt 2 mm (0.08") Clip thick
Clip Washer Water supply Bushing hose (37.40'' (950 mm) long)
7 Ground Fault Circuit Breaker A ground fault circuit breaker must be installed in the circuit that supplies power to this product. Power Supply This product is for use on a nominal 120 V circuit. Use a 120 V, 60 Hz power supply. The maximum power consumption is 301 W. Electrical wiring must be installed that meets these specifications. The plug outlet shall be placed in an accessible location after installation. Grounding This product must be grounded. In the event of an electrical short circuit, grounding reduces the risk
Installing This Product This Installing of electric shock by providing an escape wire for the electric current. The power cord has a grounding wire and a three-prong grounding plug (shown below). Do not use an adapter with the product's power plug, or use any other unauthorized method to connect the plug to an improperly configured outlet. The outlet to which the product is connected must be 120 V, 60 Hz, with a minimum electrical rating of 3 A. The outlet must be properly installed and grounded, and it must be a three-slot outlet (shown below).
DANGER:Improper use of the grounding plug may cause an electric shock. If it is necessary to use an extension cord, use only a three wire extension cord that has a three-prong grounding plug. The extension cord must be rated for at least 120 V, 60 Hz, 3 A.
Using This Product Product Using This Installation Location 47.24" (1200 mm) or more In order to prevent damaging the electronic components,15.75" (400 mm) or more install this product at a location that minimizes the possibility of it getting wet. In extremely humid conditions, provide Elongated type: 21.5 (547 mm) adequate ventilation by operating an exhaust fan or1.18" opening (30 mm) or more a window or door. Round type: 20.8 (527 mm)
8.15" (207 mm) 16.77" Water Supply (426 mm ) 8.62" (219 mm) Use only the tap water line to supply water to this product. The use of any other type of water i.e. ground water may cause improper operation1.18" (30 mm) of or more this product. The tap water pressure must be 8.5 to 106.7 psi (0.06 to 0.74 MPa, 0.6 to 7.5 kgf/cm2). Remote control Unit : mm (inch) Checking the Bathroom
The dimensions required for mounting this product 47.24" (1200 mm) or more on a toilet are shown in the figure below. Check 15.75" (400 mm) or more
to make sure there is sufficient space inside the Elongated type: 21.5 (547 mm) 1.18" (30 mm) or more bathroom and that there are no obstructions. Round type: 20.8 (527 mm)
8.15" (207 mm) 16.77" (426 mm ) 8.62" (219 mm)
1.18" (30 mm) or more
Remote control Unit : mm (inch)
8 Checking the Toilet
1. Measure the size of the toilet. Installing This Product Depending on the size of the toilet, it may not be 5.51" to 6.18" possible to mount this product on it. (140 to 157 mm) Make sure the toilet's dimensions are as shown in the figure on the right.
5.91" (150 mm) or more 15.35" (390 mm) or less
1.97" (50mm) or more 18.50" (470mm) or more Using This Product 2. Conditions for using water supply hose (included) The length of the water supply hose included with this product is 37.40" (950 mm), but a length of 31.50" (800 mm) from the junction fitting to the 31.50" (800 mm) or less seat unit's water supply socket is appropriate. (Refer to the figure on the right)
9 Illustrated Parts Breakdown
Overview
Caution label Remote control unit Deodorizer (See page 11) Toilet seat lid cartridge cover Deodorizer Tank cartridge Installing This Product This Installing
Junction fitting Marking label
Seat sensor Filter (See below.) Nozzle (for front washing)
Nozzle (for rear washing) Water supply Toilet seat hose
Power plug Using This Product Product Using This
Water shuto valve Toilet bowl
Seat unit Indicator Panel Filter
Filter
Power save LED Power LED
* The strainer removes impurities and debris from the tap water. (See page 34)
10 Installing This Product Operating Panel
STOP CLEANSING BIDET DRYER Stops Rear Cleansing, Use for Rear Cleansing. Use for Front Cleansing. Dries the User after Front Cleansing, and cleansing. (See page 28.) Drying operations.
PULSATING When pressed during rear cleansing, provides a massage effect by alternating the spray strength between high and low. SPRAY STRENGTH Adjusts the water pressure Using This Product during rear and front cleansing. (See page 26.)
POWER WATER TEMP. SETTING CHANGE Controls the power for Adjusts the temperature of Not generally used. the seat. (See page 25.) the front and rear cleansing (Used when multiple water. (See page 25.) bidets are installed.) SEAT TEMP. POWER SAVE Adjusts the toilet seat Conserves energy by temperature. (See page 25.) lowering the toilet seat temperature. (See page 29.)
Warm
Seat unit
Lock lever * Remove the warm water tank drain plug when Seat unit draining the water from the warm water tank. (See pages 36 and 37) (See page 40)
* Remove the warm water tank drain plug when Lock lever draining the water from the warm water tank. (See pages 36 and 37) (See page 40)
11 Installation
1. Required tools Have the following tools for installing this product: adjustable end wrench, Phillips head screwdriver, flat-blade screwdriver.
2. Install the junction fitting Bowl Cock Side Box Nut Tank Water Supply (1) Close the toilet water shutoff valve fully. Hose Installing This Product This Installing (2) Flush the toilet and empty all the water from the tank. (3) Place a wash bowl or other container underneath the tank water supply hose. Close Then loosen the box nut on the tank inlet side and remove it. Water Shuto Valve CAUTION • Be careful not to damage the water supply hose.
Packing Tank Inlet (4) Place the packing in the junction fitting box nut and connect the tank inlet to the Junction Fitting junction fitting. Box Nut Tank Water Supply Hose CAUTION • Do not overtighten the nut. Packing
Water Shuto (5) Insert the packing in the tank water Using This Product Product Using This Valve supply hose box nut and connect the tank water supply hose to the junction fitting. CAUTION • Do not overtighten the nut.
12 3. Installation of water supply hose to the bidet
1) Remove the protective cover Installation diagram from the end of the water Installing This Product supply hose, and pull out the cap from the water supply connection socket. Installation diagram Installation diagram 2) Connect the water supply Installation diagram Whoseater supply for theconnection bidet socket to the water supply connection Water supply Protectivesocket. cover socket Water supply connection socket Clip Water supply connection socket Water supply connectionW atersocket supply Protective cover Water supply socket socket Water supply Water supply Protective cover socketProtectiveClip cover socket Water supply O-ring Clip hose for the seat Water supply WaterClip supply hose for bidetet socket O-ring Water supply Water supply socketWater supply O-ring socket hose for the seat Water supply hose for bidetet Water supply O-ring Water supply O-ring O-ringhose for the seat Water supply hose for bidetet hose for the seat Water supply hose for bidetet O-ring O-ring CAUTION • Be careful not to damage the O-ring. 3) Insert the attachment clip onto *A damaged O-ring may cause water to leak.
the water supply hose to attach Clip Using This Product it to the bidet and water supply connection socket. CAUTIONClip *The attachment clip can be attached Clip • Firmly insert the clip. Clip *If the clip is not firmly inserted, in any direction. it may causeClip water leaks.
Clip 4) Bend the clip end and firmly Bend here Clip CAUTION clip together both the feeding Clip hose for the bidet and the • InsertBend the here clip until Bend here you feel the clip edge feeding socket. After you Bend here install the clip, twist it in both click. directions to verify that it is *If not firmly inserted, it firmly attached. may cause water leaks.
• When removing the clip, hold the clip with your fingers, and using a flathead screwdriver, push the clip downward to remove it as shown in the figure below. FlatheadFlathead screwdriverscrewdriver Flathead Flathead screwdriver screwdriver
13 4. Installation of the bidet (1) Remove the existing Installation diagram seat. Seat mounting bolts 1) Remove the nuts from the seat mounting bolts, Mounting brackets the slip washers, and CAUTION rounded packing. • When installing the bidet, Mounting plate make sure to use the parts provided in the 2) Raise the seat and installation kit. Bushing remove it by lifting the seat mounting bolts. Toilet seat mounting guide holes Seat mounting bolts
Existing seat Installing This Product This Installing
Shower toilet
Rounded packing Nut (2) Install the slide plate onto the seat. Slip washer 1) Insert the bushings 2) Insert the mounting Loosen into the seat mounting bracket into the holes. mounting plate and use the mounting bolts to References attach the slide plate to • Some toilet seats may Bushings the seat. require different methods of Mounting bolts for the toilet removal that differ from our explanation. • The removed toilet seat Mounting should be stored in your brackets home in case you remove the
Using This Product Product Using This Mounting plate shower seat.
Seat mounting holes
(3) Install the bidet. 1) Place the bidet on the toilet and align the CAUTION mark on the mounting plate with the mark on the rear section of the bidet. • When use of the mounting plate is not necessary, please retain 2) Slightly raise the front side of the bidet, slide the slide using the attaching it until the slide plate is fully inserted, and then screw included in the installation press the locking lever to secure the bidet. kit to prevent it from moving or becoming lost. Mounting plate Mounting plate
2 Bidet
1
Attaching screw
14 5. Install the water supply Junction hose (junction fitting side) Clip Fitting Installing This Product
O-ring
Water Supply Hose
Protective Cover (1) Remove the protective cover from the end Junction Fitting O-ring of the water supply hose, and insert it in the junction fitting.
CAUTION • Be careful not to damage the O-ring. *Water may leak if the O-ring is broken or damaged.
Water Supply Hose Using This Product
(2) As with the body side, fit the clip on the hose and junction fitting and lock it. Turn it to make Clip sure it is fastened securely.
• Fit the clip by engaging its ends until a click is heard. *Loose fitting may cause water leakage.
Clip
Bend
15 6. Install the remote control unit (1) Open the back cover of the remote control unit and insert the 2 size AA batteries.
CAUTION Back cover • Insert each battery so its positive pole touches a positive connector in the Battery battery compartment and its negative pole touches a negative connector.
(2) Position the bracket on the wall in the
Installing This Product This Installing location you chose for the remote control unit (see Remote control unit mounting location, page 17). Mark the location of the mounting holes on the wall. Fasten the bracket to the wall, drilling holes and using the fasteners appropriate for the wall material, as described below.
Bracket CAUTION • Leave enough space above the top of the remote control unit to allow the unit to be removed and replaced.
Wood screw If mounted in plywood paneling 0.20 in. (5 mm) or greater in thickness: Fasten the bracket to the wall with the mounting screws. Using This Product Product Using This
16 If mounted either in plywood paneling 0.20 in. (5 mm) or less in thickness or in drywall: Plywood paneling : 0.24 in. (6 mm)-dia. Drywall : 0.20 in. (5 mm)-dia. 1) In plywood paneling, drill holes with a diameter of 0.24 in. (6 mm); in drywall, drill Plastic Anchor
holes with a diameter of 0.20 in. (5 mm): Installing This Product 2) Using a hammer, gently drive the plastic anchors into the holes.
3) Fasten the bracket securely to the anchors using mounting screws. As you tighten the screws, they are hard to turn at first, then gradually get easier to turn, and then are hard to turn again. Bracket
Mounting Screw
If mounted in concrete: 1) Drill holes with a diameter of 0.24 in. (6 mm) 1.30 in. Plastic Anchor and a depth of approximately 1.30 in. (33 mm) (33 mm). Using This Product 2) Using a hammer, gently drive the plastic anchors into the holes. 0.24 in. (6 mm)-dia.
3) Fasten the bracket securely to the anchors using mounting screws. Bracket
Mounting Screw
(4) Align the remote control unit with the bracket and then push it down onto the Remote bracket. control unit
Bracket
17 Operational Check Follow the procedure below after the installation work has been completed. 1. Insert the power plug into the outlet. Confirm that the power LED on thePower seat unitplug is lit.
Power plug Installing This Product This Installing
2.Check the front
and rear cleansing spray. Roll up your sleeve and place your bare arm on (1) Check the cleansing operation. the toilet seat. 1) With your forearm resting on the toilet seat, press the Cleansing Roll up your sleeve and button. The shower automatically stops two place your bare arm on minutes after the switch is turned on. the toilet seat. 2) When the nozzle extends, cover the tip of the nozzle with your hand to catch the spray. 3) Press the STOP button to stop the Using This Product Product Using This cleansing spray. *Due to the seat sensor function, the product’s rear cleansing, front cleansing and deodorizer (2) Perform the same check using the will not operate unless you touch the seat. front cleansing spray function.
STOP SPRAY STRENGTH DRYER*Due to the seat sensor function, the product’s Stops rear cleansing, Adjusts the water Dries rearthe user cleansing, after front cleansing and deodorizer front cleansingand pressure during rear cleansing. will not operate unless you touch the seat. drying operations. and front cleansing. CAUTION When removing the filter, be sure to close the water shutoff STOP SPRAY STRENGTH DRYER valve. When attaching the filter, Stops rear cleansing, Adjusts the water Dries the user after firmly tighten it until the end of frontPULSATING cleansingand pressure during rear cleansing. the filter is hidden in the seat dryingWhen operations. pressed during and front cleansing. unit. rear cleansing, * Water will leak from the filter. provides a massage eect by alternating the spray strength Filter PULSATINGbetween high Whenand pressedlow. during rear cleansing, provides a massage eectPOWER by alternating the spray strength Filter Controls the power End betweenfor the seat.high and low.
POWERWATER TEMP. SEAT TEMP. POWER SAVE Controls the power End for Adjuststhe seat. the temperature of Adjusts the toilet seat Conserves energy by the front and rear cleansing temperature. lowering the toilet seat water. temperature.toilet WATER TEMP. SEAT TEMP. POWER SAVE Adjusts the temperature of Adjusts the toilet seat Conserves energy by 18the front and rear cleansing temperature. lowering the toilet seat water. temperature.toilet 3. If the flushing begins to weaken, or if the bidet spray seems to be getting weaker, clean the filters.
(1) Turn the water shutoff valve clockwise to close it. Turn Installing This Product As the water shutoff valve is pre-adjusted, keep track of Turnclockwise. the turns so that you can return to the original position. clockwise.
(2) Remove the filter located on the left side of the seat Water unit. WaterShuto Valve Place a wash bowl or similar item underneath the Filter. Shuto Valve (3) Rinse the filter. Filter Filter (4) Firmly tighten the filter. (5) Open the water shutoff valve by turning it back to its original position.
4. If freezing weather is anticipated, drain the water. (1) Turn the water shutoff valve clockwise to shut off the water supply to the tank. Turn
(For draining in cold areas, operate the indoor drain plug.) Turnclockwise. Using This Product (2) Press the flush lever on the tank to drain water from the tank. clockwise. (3) Remove the power plug from the outlet. (4) Drain the water from the warm water tank and the water supply hose connected to the seat unit. 1) Pull the lock lever on the right side of the seat unit and slide the seat unit forward to remove it from the toilet bowl. 2) Remove the filter located on the left side of the seat unit. Place a wash bowl or similar item underneath the filter. Lock Lever 3) Tilt the seat unit to the left to drain the water from the Lock Lever water supply hose through the filter hole. Filter 4) After the water has been drained, firmly attach the filter. Filter 5) Turn the drain plug located on the bottom of the seat unit to the left (counterclockwise) 90 degrees to loosen it. 6) Tilt the seat unit forward, pull out the drain plug and completely drain out the water from the warm water tank. 7) After the water has been drained, push and turn the drain plug to the right (clockwise) 90 degrees to tighten it. 8) Place the seat unit on the toilet bowl, and align the mark on the mounting plate with the convex part at the lower rear of the seat unit. 9) Slide the seat unit backward and push the lock lever to secure the seat unit. ▼ mark of the mounting plate ▼ mark of the mounting plate Loosen Loosen
Drain Convex part of the DrainPlug Convexback part of the of theseat unit Plug back of the seat unit
19 TABLE OF CONTENTS
Using This Product...... 21 Safety Precautions...... 21 Observe These Precautions to Prevent Possible Injury or Damage...... 21 Additional Important Information...... 23 Product Functions...... 24 Remote Control Unit ...... 24 Preparations Before Use...... 25 How to Use the Basic Functions...... 26 How to Use the Convenient Functions...... 29 Maintaining This Product...... 32 Cleaning the Seat Unit...... 32 Cleaning the Nozzles...... 32 How to Clean the Deodorizing Cartridge...... 33 Cleaning the Filter...... 34 Cleaning the Area Covered by the Toilet Seat Lid...... 35 Cleaning the Areas of the Toilet That Are Covered by the Seat Unit...... 36 Preventing Freezing...... 38 Thawing Frozen Water Supply...... 39 Draining This Product During Periods of Extended Disuse...... 40 Replacing the Remote Control Batteries...... 41 Troubleshooting...... 42 After-sales Service...... 45 Specifications...... 46 Warranty information...... 47
ENGLISH 20 Installing This Product Using This Product 21
. . fail fail roughly, as this may cause either of these as this may roughly, parts to Do not open or close the toilet seat or lid seat Do not open or close the toilet Do not cover the warm air outlet or the warm Do not cover it, as this may object into insert a foreign cause it to For care of the plastic parts, our parts, of the plastic care For mild, the use of a recommends company using Avoid cleaner. liquid, all-purpose as powdered (such products abrasive products and chlorine-based cleansers) can as these products as bleach), (such of properties damage the anti-bacterial components. the plastic . the lid. . fail electric shock
or break or
fire
damage .
break
power plug from the wall outlet. Failure to to Failure outlet. the wall plug from power in electric shock or fire. result do so could holding the cord, the plug or cord may be may the plug or cord holding the cord, in damaged, resulting the remove maintaining this product, When If the plug is inserted or disconnected by by or disconnected If the plug is inserted Safety Precautions Safety Do not lean back against the lid during Do not lean back against as this may use, Do not forcefully pull on the nozzle or pull on the nozzle Do not forcefully cause it to turn it, as this may * Hold the plug when inserting or Hold the plug when plug. the power disconnecting * Do not stand on the toilet seat lid, as it seat on the toilet Do not stand may
Observe These Precautions to Prevent Possible Injury or Damage Injury Possible Prevent to Precautions These Observe 4. Using This Product This Using 4. Using This Product Installing This Product 22 drying functions. plastic or as thismay cause Do notplace aheater nearthetoilet, electric shock power plug.Doingsocould causean In athunderstorm, donottouch the sunlight, asthismay cause Do notexpose thisproduct to direct described onPage 38. activate theantifreeze functionas If freezing weather isanticipated, failure . ofthewashing and discoloration discoloration ofthe . so could result inelectric shockorfire. the seat unitoronthepower plug.Doing unit. Donotsplashwater orcleanseron Do notpourwater orcleanserontheseat using thisproduct. whentheyseat temperature are to "Off" For thefollowing persons,besure to setthe of time, settheseat temperature to "O If you are usingthisproduct for alongperiod sensitivity andotherfactors. burns alsodependsonanindividual’s skin (about 104ºF[40ºC]).Susceptibility to with anobjectat relatively low temperature the skinhasbeenincontact for sometime A low temperature burnmay occur when Regarding Low Temperature Burns * Ifyou usethisproduct for anextended cause nozzle Do noturinate onthenozzle asitcould damage water supplyhoseasitcould result in Do notapplyunnecessary force to the with illness, personswithlimited Children, elderlypersons,persons low temperature burns. theretemperature isariskof to "Off", period oftimewithoutsettingtheseat extremely fatigued. are intoxicated, orpersonswhoare that causedrowsiness, persons who persons whoare takingmedicines mobility, personswithsensitive skin, andcausewater to damage orfailure leak . . ff" . Installing This Product Using This Product 23 Seat sensor You are leaning forward or sitting on the leaning forward are You You are wearing clothing that is black, clothing that wearing are You the sensor. is on Dirt or water Lean back on the toilet seat, or change seat, back on the toilet Lean sit on the toilet. you the way hand or the sensor with your Cover skin is your clothing so that your arrange the sensor. sensed by the sensor. from the dirt or water Remove front of the seat. front napped, or otherwise inhibits light reflection. using the wash or bidet functions. using the wash Sit back fully on the toilet seat and arrange and arrange seat Sit back fully on the toilet when clothing so it does not get wet your Before and after cleansing and when the and when cleansing and after Before is button adjustment temperature water the from sprayed is water etc., pressed, and is not a design by occurs This nozzle. concern. cause for other while under any sprays If water close constantly, or sprays configuration, the and remove valve shutoff the water outlet. Then, the wall plug from power repairs. request to our company contact The seat sensor uses light reflection to to sensor uses light reflection seat The the under not operate function and may circumstances: following • • • This product is equipped with an seat with an seat is equipped product This from the water prevents sensor that if operating from and the dryer spraying This seat. nobody is sitting on the toilet Bidet, or if the wash, activation prevents when the toilet is pressed button Dryer is unoccupied. seat F ° C), ° C]) to the C]) to ° C). ° C), ° F (38 F [5 ° ° F (40 ° F (36 ° C]). ° Low: Approx. 97 97 Approx. Low: 100 Medium: Approx. 104 High: Approx. The water temperature range is preset to to is preset range temperature water The [38 It takes approximately 10 minutes to heat heat to 10 minutes approximately It takes about 41 (at water cold (about 100 temperature appropriate wait about 3 minutes for the water to to the water for about 3 minutes wait reheat. rear cleansing or front cleansing is used. cleansing is or front cleansing rear a comfortable below drops If the water and button the stop press temperature, Water temperature gradually drops when when drops gradually temperature Water the following temperatures: the following Additional Important Information Important Additional the water pressure is set to the lowest the lowest to is set pressure the water turn the Spray setting. If this occurs, (See page 26.) dial clockwise. Strength and spray water through them. When the them. When through water and spray the low, is extremely pressure tap water all when at water spray not may nozzles This product is designed to use the tap is designed to product This the nozzles extend to pressure water interference occurs, move the radio or TV the radio move occurs, interference this product. from away If a radio or a TV is placed near this or a TV is placed If a radio with the signals from interference toilet, If occur. unit may control the remote come from the deodorizer. This will go This the deodorizer. from come in a short time. away When the toilet is new, a slight odor may a slight odor may is new, the toilet When lid is closed abruptly or too forcefully, this forcefully, lid is closed abruptly or too be damaged or fail. could product To prevent the toilet seat and toilet seat seat and toilet seat the toilet prevent To a damping slamming down, lid from them lower to mechanism is provided seat or toilet seat If the toilet gradually. • • The capacity of the warm water tank is water warm capacity of the • The L. 0.88 remove the cover. remove A toilet seat cover or toilet seat lid cover cover lid seat or toilet cover seat A toilet either remain to sensor cause the seat may all, leading go on at or not on continuously occurs, If this operation. improper to Using This Product Installing This Product 24 (See page25.) Bidet mainunitON/OFF. Turns thepowerto (See page27) low andhigh. pressure between Alternates water functions. bidet anddryer Stops thecleansing, POWER STOP PULSATING Product Functions Remote Control Unit (See page25) of theheatedtoiletseat. Adjusts thetemperature (See page25.) temperature. Adjusts thewater (See page26) front cleansing. pressure duringrearor Adjusts thewater SEAT TEMP W SPRA OPEN THECOVEROFREMOTECONTROLUNIT. spray. (Seepage26) Press againforoscillating Use forrearcleansing. CLEANSING A TER TEMP Y STRENGTH . . *The deodorizerfanoperatesautomatically (See page29) and watertemperatures. lowering thetoiletseat Conserves energyby (See page28) Blows airfordrying. POWER SAVE DRYER spray. (Seepage26) Press againforwiderange Use forfrontcleansing. BIDET bidets areinstalled.) (Used whenmultiple Not generallyused. is low.(Seepage41) when thebatterypower This indicatorappears Remote controltransmitter SETTING CHANGE BATTERY INDICATOR . (Seepage28) Installing This Product Using This Product 25
to 15 minutes prior to use. prior to 15 minutes to Heater is equipped with a "Seat product This temperature low prevents function that Auto-Off" heater the seat switching automatically burns by See page 30. off when it is occupied. is temperature the seat setting for default The can be increased temperature seat "MID". The See page 30. incrementally. or decreased The toilet seat will not become warm instantly. instantly. warm not become will seat toilet The set temperature, seat a comfortable achieve To about 10 temperature the desired to the seat Reference • • • The indicator LED cycles through the temperature temperature the through cycles LED indicator The is pressed. button settings each time the temperature seconds. several goes out after LED indicator The Adjust the temperature of the toilet seat seat of the toilet the temperature Adjust switch. Temp. using the Seat Seat Temp. Temp. Seat The seat temperature can be set to one of 4 settings: can be set to temperature seat The temperature. preferred your Set it to and OFF. LO HI, MID, * * (Turning the power on/off) the power (Turning WARNING If this product is being used for a long period of time is being used for If this product Be sure to set the seat temperature to "OFF" to temperature set the seat to Be sure with the seat temperature set to any setting other than any set to temperature with the seat burns. temperature of causing low is a risk there OFF, with sensitive skin, persons who are taking medicines that that taking medicines persons who are skin, with sensitive persons such as sleeping medications, them drowsy, make fatigued. extremely drunk, or persons who are very who are when the following persons use the toilet. persons use the toilet. when the following persons persons with an illness, elderly persons, [Children, persons themselves, by the temperature who cannot adjust If you are using this product for a long period of for using this product are If you OFF. temperature turn the seat time, When connecting the power cord to the outlet for the first time, the main power power main the time, first the for outlet the to cord power the connecting When settings each time the temperature button is pressed. button settings each time the temperature seconds. several goes out after LED indicator The The indicator LED cycles through the temperature temperature the through cycles LED indicator The will automatically be on. will automatically If the power is ON, the power LED on the indicator panel will light up. LED on the indicator the power is ON, If the power Preparations Before Use Before Preparations Adjust the temperature of the bidet bidet the of temperature the Adjust using the Water Temp. switch. Temp. using the Water Water Temp. Temp. Water Power *
• • * of 4 settings: HI, MID, LO and OFF. Set it to Set it to and OFF. LO of 4 settings: HI, MID, temperature. preferred your * The water temperature can be set to one can be set to temperature water The * Press the Power button to turn the power ON or OFF. power turn the to button Power the Press * Performing the following operations before using the bidet allows you to use to you allows using the bidet before operations the following Performing comfortably. the toilet Using This Product Installing This Product 26 CAUTION • • Cleansing 3 How to UsetheBasicFunctions toilet. to prevent water from splashingoutsidethe setting thewater pressure to HI. water pressure issetto LO. In suchcases,try nozzles may notspray water far enoughifthe Fully cover the toilet seat whilesittingin order In places withlow tapwater pressure, the 1 * rear cleansingnozzle. Water issprayed from the cleansing automatically after 2minutes. included whichstops bothrear andfront An automatic self-stop functionis Press theCleansingbutton. the spraying. Press the STOP button to stop
* * the spray strength asdesired. There are sixlevels ofspray strength. Adjust indicating thecurrent spray strength setting. pressed before usingtheshower, theLEDlights, after several seconds. When the[STOP] button is The indicator LEDon theremote control goesout beyond thedefault settingrange. You candecrease orincrease thespray strength 2 Reference Bidet seconds. pressed. strength settingseachtime thebutton is The indicator LEDcycles through thespray The indicator LEDgoesoutafter several 1 button to adjust theshower strength. Press the[+]or[-] Spray Strength front cleansingnozzle. Water issprayed from the Press theBidetbutton. See page51.
Installing This Product Using This Product 27 Massage effects may be felt differently differently felt be may effects Massage depending on users. *
To stop the Pulsating spray, press the press spray, the Pulsating stop To again. button Pulsating Press the Pulsating button during button the Pulsating Press cleansing. rear
Water pressure alternates between high and low during rear cleansing, providing a massaging a massaging providing cleansing, during rear and low high between alternates pressure Water effect. 1 Massage feeling varies depending on the spray strength. strength. depending on the spray varies feeling Massage the decreases the [-] button and pressing strength, the spray increases the [+] button Pressing
spray strength. spray 2 Rear Pulsating cleansing Pulsating Rear * Using This Product Installing This Product 28 * • • Reference 2 Deodorizing Drying 3 1 deodorizer fan to runcontinuously. If anunsuitabletoilet seat cover isused, the seat sensormay becovered by thecloth,causing * * * * The deodorizer function stops temporarily temperature from thehightemperature starting pattern to thelow temperature starting pattern. Seepage30 This product isequippedwitha"low dryingtemperature start" function which switches thedrying remove any drops ofwater, priorto pressing theDryer button. To speed upthedryingprocess after usingoneofthewash functions,lightlywipewithtoilet paperto 1
Stops after 1minute drying functionisbeingused. which absorbsodorsfrom thetoilet. Seepage33. This product isequippedwithadeodorizer cartridge stops dryingautomatically after 4minutes. while thedryingfunctionisbeingused. Deodorizing is stopped temporarily while the An automatic self-stop functionisincludedthat Warm airdriestheuserafter front orrear cleansing. minute after you stand up. Deodorizing automatically stops 1 sits onthetoilet seat. Deodorizing starts whenaperson drying function. Press theSTOP button to stop the Press theDryer button. Press thebuttonssimultaneouslyfor2seconds • • * * * To disable thedeodorizer * * * Set itto thetemperature you prefer. available in3modes:"Hi""Mid"and"Lo". The warm airtemperature settingis *
2 with illness, persons withlimited mobility, persons Children, elderlypersons,persons when they are usingthisproduct: sure to settheDryer modeto LO For thefollowing persons,be period oftime, settheDryer modeto LO. If you are usingthedryingfunctionfor along other thanLO, there isdangerofcausingburns. period oftimewiththeDryer modeon any setting If thedryingfunctionisbeingusedfor along intoxicated, orpersonswhoare extremely fatigued. medicines that causedrowsiness, personswho are with sensitive skin,personswhoare taking When thedeodorizer feature isdisabled, for 2seconds. the STOP andBidetbuttons simultaneously no longeractivate whenauserisdetected. momentarily. At thispoint,thedeodorizer will the power LED ontheseat unitflashes The restore thedeodorizer function,press simultaneously for 2seconds. Press theSTOP andBidetbuttons When dryingisstopped, thesettingisreturned to thepreset temperature. The indicator LEDgoesoutafter several seconds. settings eachtimethetemperature button ispressed. The indicator LED cycles through the temperature from “High”to “Medium”to “Low,” thenbackto “High.” Each timethebutton ispressed, theindicator changes WARNING the Press theDryer button againto change Press thebuttonssimultaneouslyfor 2seconds Press thebuttonssimultaneouslyfor 2seconds temperature ofthewarm air . COMPULSORY . . . Installing This Product Using This Product 29 ave Power S Reheat In Use Set e e r r ave OFF eratu eratu et emp emp Power S T S T SeatT emperature When the One-Touch Power Power One-Touch the When Save function is running, the the running, is function Save LED lights up. save power
* 24:00 22:00 Press the Power Save button. button. Save the Power Press LED lights up. save power The 20:00 1 Reheat 18:00 Reduces power consumption by turning off the seat heater for 8 8 for heater seat the off turning by consumption power Reduces 8 hours. after restored automatically settings are power hours. The
: 16:00 14:00 8 hours 12:00 Set 10:00 8:00 e e r r
ave OFF eratu eratu et emp emp function, press the Power Save button button Save the Power function, press again. LED will go out.) save power (The To cancel the one-touch power save save power the one-touch cancel To Power S T S T
One-Touch Power Save Power One-Touch Once 8 hours have passed, the power settings will automatically return to their original state. their original state. to return settings will automatically the power passed, 8 hours have Once The power save LED will switch from flashing to off. flashing to from LED will switch save power The of number any set be can but everyday, repeated automatically not is save power one-touch The times in a day. Even when the power save functions are not operating, leaving the toilet lid closed is an an is closed lid toilet the leaving operating, not are functions save power the when Even effective way to conserve energy. conserve to way effective SeatT emperature can you use may feel the You when toilet even function the save is power operating. However, you If desired, is turned off. seat and the toilet water for as the heater is cold the water that function. save turn off the power may For example: when one-touch power save is set for 10:00 For example: when one-touch power save
* * * * 2 How to Use the Convenient Functions the Convenient Use to How Power Save Power One-touch power save (8 hours) save power One-touch Using This Product Installing This Product 30 • * * • Starting warm airdryingat "high"or"low" temperature handicapped persons,orpersonswhoare particularly sensitive to heat. temperature settingis"medium". This functionisconvenient for elderlypersons, Warm airdryingcanbesetsothat itstarts at "high"or"low" temperature. The default • • • • can belowered by 2°. The default mediumtemperature oftheseat when theseat isoccupied. automatically switching theseat heater OFF that prevents low temperature burnsby This product isequippedwithafunction Other convenient functions * If you usethetoilet continuously withthisfunctionenabled,you may feel thetoilet seat iswarm. Seat heater auto-off Changing thedefault mediumtemperature settingoftheseat.
The seat heater automatically turnsONwhenyou stand up. back to “Low.” switches from “Low” to “High”to “Medium,” then using thesameprocedure. LED ontheseat willflash. simultaneously for 2seconds. Press theSTOP button andDryer button The indicator LEDgoes outafter several seconds. Each timethebutton ispressed, theindicator The mediumtemperature changecanbecancelled Once thesettinghasbeenchanged,andindicator
restored usingthesameprocedure. flash. changed, an indicator LED on the seat will button simultaneously for 2seconds. the sameprocedure. disabled, you willheartwo beeps. button simultaneouslyfor 2seconds. This function can be canceled by following by canceled be can function This Cleansing the andSTOPbutton the Press h dfut et eprtr stig a be can setting temperature seat default The Temp.Seat andSTOPbutton the Press Once the seat heater auto-off has been Once the default temperature setting is Setting andcanceling Setting orcanceling Setting orcanceling Press thebuttons simultaneously for 2seconds. Press thebuttons simultaneouslyfor 2seconds. Press thebuttons simultaneouslyfor 2seconds. Installing This Product Using This Product 31 buttons simultaneously for 2 seconds. for simultaneously buttons To set the water pressure lower, press the press lower, pressure set the water To In places with low tap water pressure, the pressure, tap water with low In places when the water pressure is set to the lowest the lowest is set to pressure when the water setting. nozzles may not extend or it may take take or it may not extend may nozzles extend, to the nozzle longer than usual for Press the buttons simultaneously for 2 seconds. simultaneously for the buttons Press *
The water pressure is lowered one is lowered pressure water The are each time the buttons step pressed. will pressure original water The time this the third be restored is performed. procedure
To restore the original water pressure, press the Cleansing button and the Power Save ON/ Save and the Power the Cleansing button press pressure, the original water restore To 2 seconds. simultaneously for OFF button pressed. are unit blinks momentarily each time the buttons LED on the seat power The Press the Cleansing button and the Power Save Save and the Power the Cleansing button Press seconds. 2 simultaneously for button ON/OFF unit flashes LED on the seat power The will be set pressure momentarily and the water higher. one step In order to return to the original water pressure, repeat the process of pressing the Bidet of pressing the process repeat pressure, the original water to return to In order returns system The 2 seconds. simultaneously for button ON/OFF Save and the Power button is performed. time this procedure the third after pressure original water the to one step lower. lower. one step the Adjust available. settings are lower Two strength. preferred your to spray Press the Bidet button and the Power Save ON/ Save and the Power Bidet button the Press 2 seconds. for simultaneously OFF button unit flashes seat on the located LED power The will be set pressure the water momentarily and Setting and canceling Setting and canceling For persons who would like to turn the water pressure higher pressure turn the water to like who would persons For • • • • Turning the water pressure even lower. even pressure the water Turning The strength of the bidet spray function can be set even higher by performing the following the following performing higher by function can be set even of the bidet spray strength The procedure. even lower by performing the following procedure. the following performing by lower even If the "LO" setting for the bidet spray is still too strong, adjust the water pressure pressure the water adjust strong, too is still bidet spray the for setting If the "LO" Using This Product Installing This Product 32 Maintaining This Product Do notforcefully pullonthenozzle orbendit. Pull outthenozzle andcleanitwithasponge. dampened withwater. Periodically, wipeofftheseat unitwithasoftcloth Cleaning theNozzles Cleaning theSeat Unit Installing This Product Using This Product 33
Cartridge filter Deodorizing cartridge Cover of the opening that contains the deodorizing cartridge Underside of the toilet seat Underside of the toilet Please make sure the cartridge orientation is correct How to clean the deodorizing cartridge clean to How cartridge into the opening as shown as shown the opening cartridge into the right. (Rounded to in the diagram upward.) facing corners deodorizing cartridge or allow it to it to deodorizing cartridge or allow wet! become Caution: Insert the deodorizing Be careful! Do not wash the Do not wash Be careful! CAUTION Hold the deodorizing cartridge with Hold the deodorizing cartridge Remove the deodorizing cartridge. the Remove When the cleaning is complete, reinstall reinstall the cleaning is complete, When Clean off any dust covering the cartridge covering dust Clean off any Remove the seat from the toilet (see page page (see toilet the from the seat Remove Open the cover that is over the is over that Open the cover your fingertips and insert it into the and insert it into fingertips your the cover. opening, and then replace Disconnect the power plug from the outlet. plug from the power Disconnect filter using a toothbrush. filter 14). deodorizing cartridge, which is installed on installed which is deodorizing cartridge, the underside of the seat. the toilet seat (see page 37). page (see seat the toilet The useful life of the deodorizing cartridge is based on average hours of use by a family of four, two males two of four, a family of use by hours is based on average of the deodorizing cartridge useful life The and two females. and two CAUTION CAUTION * If odors still bother you after cleaning the cartridge filter, the deodorizing cartridge has the deodorizing cartridge has cleaning the cartridge filter, after bother you If odors still the deodorizing cartridge is of useful life The cartridge. it with a new Please replace expired. under normal use. years seven approximately Replacing the deodorizing cartridge Replacing 7. 6. 4. 5. 3. 2. 1. How to Clean the Deodorizing Cartridge the Deodorizing Clean to How Please do not place your finger or anything other than the deodorizing finger or anything your Please do not place cartridge inside the enclosure. failure. finger or equipment your cause an injury to *Doing so may The deodorizing fan is installed behind the deodorizer cartridge enclosure. cartridge enclosure. behind the deodorizer is installed deodorizing fan The The deodorizing cartridge may perform poorly if covered with dust. If odors are present, clean present, If odors are with dust. poorly if covered perform cartridge may deodorizing The the cartridge. or replace Using This Product Installing This Product 34 If thewater pressure weakens over time, cleanthefilter usingthefollowing procedure. * Failure to dosocould result inwater leakage. the filter, tighten itfullyuntilthelineiscompletely inside theseat unit. When removing thefilter, besure to closethewater shutoff valve. When installing Cleaning theFilter 2. 1. container underneath to catch thewater. water willpourout.Place awash bowl orsimilar When thefilter isremoved, asmallamountof or similartool andremove it. left oftheseat unitusingascrewdriver Turn thefilter located onthebottom can return to theoriginalposition. beforehand, keep track oftheturnssothat you Since thewater shutoff valve isadjusted off thewater supply. Close thewater shutoff valve to cut T CAUTION urn counterclockwise. Filt er W T urn clockwise. ater shuto Cleaning thefilter valve 5. 4. 3. 6. the sea end isc T
original position. the water shutoff valve backto its Open thewater shutoff valve by turning a screwdriver orsimilartool. Install thefilter, tightening itfullywith with water. of thefilter by rinsingit adhering to theinside Remove thedirt ight Finally, perform anoperational check. (See page18.) en thefilt t unit. omplet End er untilthe ely inside Turn counterclockwise. T urn counterclockwise. Installing This Product Using This Product 35
Lift up. If you try to pull hard to remove the toilet the toilet remove to pull hard try to If you or break. crack lid, it could seat Slide. Hold the toilet seat up on the right seat Hold the toilet side and slide it to the left, removing it it the left, removing it to side and slide pin on the left side. the from Move the toilet seat lid to the right, lid to seat the toilet Move right opening it so the pin hole on the side is outside the pin, and then fit install pin to the the pin hole onto lid. seat the toilet
CAUTION 2. 2.
Pin hole oilet seat lid Pin T Installing the toilet seat lid seat toilet the Installing Removing the toilet seat lid seat toilet the Removing Move to the outside. . oilet seat lid T When cleaning this product, be sure to unplug the power plug from the wall outlet. the wall plug from unplug the power to be sure cleaning this product, When Fit together Pin hole Pin Move the pin hole on the right side the pin Move Align the pin hole on the left side Align the pin hole on the left of the toilet seat lid to the outside and the outside lid to seat of the toilet the pin. it from remove of the toilet seat lid with the pin on seat of the toilet unit and fit the the left side of the seat the pin. lid onto
1. After cleaning, plug the power plug into the outlet and check to make sure the water the water sure make the outlet and check to plug into plug the power cleaning, After again illuminated. once LEDs are indicator temperature seat and toilet temperature 1. Cleaning the Area Covered by the Toilet Seat Lid Seat the Toilet by Covered Area the Cleaning CAUTION Using This Product Installing This Product 36 CAUTION 5. Never turnthe seat unitupsidedown whileitis 4. 3. Donotpullonany cord orwater supplyhose. 2. Besure to drain thewater outofthewarm water 1. Cleaning theAreas oftheToilet That Are Covered by theSeat Unit 3. 1. Remember to remove thepower plugfrom thewall Carefully handletheseat unitwhenremoving or * connected to thepower supply. cleaning. tank. could causesmoke orfire. outlet. * Itcould causedamageto thisproduct. * Failure to dosomay leadto water leakage. * Doingsomay leadto damageorawater leak. * Ifthere isstill water inthetank,itcould leakout. * If the water heater operates withnowater in the tank,it Remove thepower plugfrom thewall outlet. (Seecaution1.) toilet seat ortoilet seat lid.Donotuseexcessive force. When removing this product, slide the unit slowly without holding the 2 1 * * Donotr
the floor Do remove itfrom thetoilet. (Seecaution2,3and4.) Slide thisproduct forward, Pull thelocklever ontherightsideofseat unit. not 2 * * Donotr place
the floor Do everse . forward Slide not on 2 W place
everse . forward Slide ater shuto T urn clockwise. * Donotpull. on Lock lever W
ater shuto T 1. Removing theseat unit urn clockwise. * Donotpull. valve Lock lever raise it valve
slightly 1 2. , and
Since the water shutoff valve is adjusted Close the water shutoff valve to cut off the can return thevalve to itsoriginalposition. beforehand, keep track of the turns so you water supply. (Seecaution2.) 1 * * Donotr
the floor Do
* * Donotr
not the floor Do 2 not place everse 4. . forward Slide
2 place Carefully place theseat unit on therimoftoilet bowl. everse . * * Donotr forward Slide
on the floor Do W
on not ater shuto T W urn clockwise. * Donotpull.
2 place ater shuto T everse . forward Slide urn clockwise. * Donotpull. Lock lever on Lock lever W valve
ater shuto T valve urn clockwise. * Donotpull. Lock lever valve 1 1 1 here. Installing This Product Using This Product 37 urn T counterclockwise. Wipe o 2 1 e here. here. plat urn ing T counterclockwise. o Wipe mount Slide the seat on to the on to Slide the seat 2 1 e
plat " mark on the ing " ) on the mounting plate with the plate ) on the mounting mount Protrusion on the rear of the seat unit 3. Assembling the Seat Unit Seat the 3. Assembling " mark on the lever cannot be pushed back in. lever triangle mark ( unit. of the seat rear on the protrusion Place the seat unit on the toilet bowl. Align the inverted the inverted Align bowl. unit on the toilet the seat Place and forth and left and right, making sure it has been and left and right, making sure and forth in place. locked securely Slightly raise the front of the seat. the front Slightly raise the seat. secure to Push the lock lever mounting plate. lock the back, way the all pushed not is product this If * After locking this product in place, shake it slightly back shake in place, locking this product After * Make sure water is not leaking water sure * Make Open the water shut-off valve shut-off valve Open the water its original position and run to this product. through water of the joints. any from and seat temperature indicator LEDs are illuminated. LEDs are indicator temperature and seat At this time, check to make sure the water temperature temperature the water sure make check to this time, At Insert the power plug into the outlet. plug into Insert the power operational check. (See page 18.) check. operational After completing the assembling, perform an perform the assembling, completing After "
1. 2. 3.
4. 5. Check that the seat unit has been completely locked in place. in place. locked unit has been completely seat the Check that * Doing so may permanently deform it or cut off the water supply. supply. it or cut off the water permanently deform * Doing so may * If not, the seat unit may slide off the toilet bowl. slide off the toilet unit may * If not, the seat force. hose using excessive Do not bend any CAUTION Protrusion on the rear of the seat unit here. here. urn urn T counterclockwise. T counterclockwise. Wipe o Wipe o 2. Cleaning 2. Cleaning 2 2
DANGER 1 1 e e lead to product failure. product lead to may lead to product failure. product to lead may cleaning the toilet bowl. bowl. cleaning the toilet There is danger of electric shock or fire. is danger of There
around the nozzle. around or hand your injure may so Doing * Do not put your hand or any hand or any Do not put your object inside the air outlet or using a cloth damped with water. unit seat the on detergent Leaving * unit with detergent. Before Before unit with detergent. unit, wipe the the seat installing bowl the toilet off from detergent When cleaning the toilet bowl, bowl, cleaning the toilet When splash the seat not to care take Wipe the seat unit clean using a the seat Wipe with water. soft cloth dampened * See the user's manual for details on on details for manual user's the See * this product. Do not splash water on Do not splash water this product. plug. unit or the power the seat * Do not pour water or cleanser inside Do not pour water CAUTION plat plat
ing ing
mount mount " mark on the " mark on the " " Protrusion on the rear of the seat unit Protrusion on the rear of the seat unit Using This Product Installing This Product 38 * The water inthisproduct could freeze methods to prevent damage. implement thefreeze prevention If there isriskofwater linesfreezing, Leave thepower pluginthewall outlet. damage. danger ofwater linesfreezing, implementthefollowing freeze prevention methodto prevent In freezing conditions, thewater inthisproduct may freeze andcausedamage. Ifthere is (2) turns soyou canreturn thevalve to itsoriginalpositionafterwards. Since thewater shutoff valve isadjusted beforehand, keep track ofthe (1) procedure. out ofthewater supplyhoseusingthefollowing If thebathroom cannotbeheated, drain thewater 2. 1. Preventing Freezing shock, fire andwater leakage. and causedamage, resulting inelectric Setthewater temperature onHi,theseat Heat thebathroom. 2) 1) from thewater supplyhose. Close thewater shutoff valve to cutoffthewater supply. temperature onHi,andclosethetoilet seat lid If unable to heat the bathroom, drain the water WARNING W T inside theseatunit. the endisoutofsight T (See cautiononnext page.) urn counterclockwise. W W
T T ighten thestraineruntil inside theseatunit. the endisoutofsight T inside theseatunit. the endisoutofsight T ater supplyhose urn counterclockwise. urn counterclockwise. Place a wash bowl or similar container Remove thefilter usingascrewdriver. underneath thefilter. ighten thestraineruntil ighten thestraineruntil ater supplyhose ater supplyhose End End End General freeze prevention measures T urn clockwise. T T urn clockwise. urn clockwise. W W W ater shuto ater shuto ater shuto Filter Filter Filter Filter
Filter Filter COMPULSORY valve valve valve
. 4. 3. W T inside theseatunit. the endisoutofsight T * Failure to dosocould result inwater leakage. unit. the lineisoutofsightinsideseat installing thefilter, tighten itfullyuntil close thewater shutoff valve. When When removing thefilter, besure to urn counterclockwise.
ighten thestraineruntil ater supplyhose W T 6) 5) 4) Tilt theseat unitanddrain outthewater 3) After approximately 5seconds, press the Cover theseat sensorwithyour hand When usingthetoilet again,besure to perform an operational check.Seepage18. STOP button. inside thebody. drain thewater from thevalve located and press thewash button inorder to inside theseatunit. the endisoutofsight T urn counterclockwise. ighten thestraineruntil ater supplyhose CAUTION
Tighten thefilter securely usingascrewdriver. product onto thetoilet bowl. (Seepage37.) opening. hose through thefilter installation from insidetheseat unitwater supply page 36.) After draining out the water, install this Remove the seat unit from the toilet. (See End End T urn clockwise. T W urn clockwise. ater shuto W ater shuto Filter Filter Filter Filter valve valve COMPULSORY Installing This Product Using This Product 39
Do not apply hot water or hot air to the water supply hose. This could damage could This supply hose. the water or hot air to water Do not apply hot the water supply hose, causing it to leak. causing it to supply hose, the water CAUTION: Thawing Frozen Water Supply Water Frozen Thawing wash or bidet does not spray water, the hose or connection must be thawed. To thaw the hose or the thaw To be thawed. must or connection the hose water, does not spray or bidet wash the hose or connection thaw To room. in the temperature the air increase gradually, connection hose or connection. the to directly water in warm a cloth dipped apply quickly, more If the water in the seat unit water supply hose or in the water supply connection freezes, and the freezes, supply connection in the water supply hose or water unit the seat in If the water Using This Product Installing This Product 40 * The water could become dirtyandcause skininflammation. * be sure to drain thewater from thisproduct. When notusingthisproduct for an extended period oftime, from thisproduct. If thisproduct willnotbeusedfor anextended time, follow theseprocedures to drain thewater resulting inelectricshock,fire andwater leakage. The water in this product could freeze and cause damage, 4. 3. 1. Closethewater shutoff valve to stop 2. CAUTION: Draining This Product DuringPeriods ofExtended Disuse 5) 4) 3) Drain thewater from thewater 2) 1) Place awash bowl orsimilarcontainer supply hose. outlet. Remove thepower plugfrom thewall the flow ofwater. Drain thewater from thetankusing the flushlever. WARNING Remove thefilter withascrewdriver orsimilartool. After draining outthewater, closethe Tilt theseat unitanddrain outthewater filter tightlyusingascrewdriver. page 14. Remove theseat unitfrom thetoilet. See opening hose through thefilter installation from insidetheseat unitwater supply underneath thefilter. view insidetheseatunit. until thelineisoutof T counterclockwise. T view insidetheseatunit. until thelineisoutof T ighten thestrainer view insidetheseatunit. until thelineisoutof T counterclockwise. T urn counterclockwise. T view insidetheseatunit. until thelineisoutof T ighten thestrainer counterclockwise. T hose supply W ighten thestrainer urn ighten thestrainer urn urn hose supply W hose supply W hose supply W ater ater ater ater Line product, oritcanfreeze. Ineithercase, thisproduct could bedamaged. Line Line Water leftinthisproduct for anextended periodcanbecome contaminated andclogthis Line Draining thewater anddisconnecting thepower . T T T urn counterclockwise90° T urn counterclockwise90° urn counterclockwise90° urn counterclockwise90° T T T urn clockwise 90° W T urn clockwise90° W T urn clockwise 90° W urn clockwise90° W urn clockwise. T T ater shuto T drain plug W urn clockwise. urn clockwise. ater shuto ater shuto urn clockwise. drain plug W drain plug W ater shuto drain plug W arm watertank arm watertank arm watertank arm watertank valve Filter Filter valve valve Filter valve Filter Filter Filter Filter Filter
CAUTION 6. 5. Remove thewarm water tankdrain Prior to usingthetoilet again,besure page 18 to perform anoperational check.See 4) 3) 2) * until thelineisoutofsightinside theseat unit. shutoff valve. When installing thefilter, tighten itfully When removing thefilter, besure to closethewater 1) warm water tank plug anddrain thewater from the Failure to do socould result inwater leakage. Install thisproduct onto thetoilet bowl. After draining thewater, turnthewater (See page37.) it. drain plugclockwise 90degrees to close view insidetheseatunit. until thelineisoutof T the warm water tank. unit forward, anddrain allthewater from Pull outthewater drain plug, tilttheseat 90 degrees. of thisproduct by turningit Loosen thewater drain plugontheseat unit counterclockwise. T ighten thestrainer CAUTION urn hose supply W view insidetheseatunit. until thelineisoutof T counterclockwise. T ighten thestrainer ater * Water could penetrate insidethe product withtheseat unitinthisposition. Do notattempt to drain thewater from this urn hose supply W mechanism andcausedamage. view insidetheseatunit. until thelineisoutof T . counterclockwise. T Line ighten thestrainer ater urn hose supply W Line ater T urn counterclockwise90° Line T urn counterclockwise90° T T urn clockwise90° W urn counterclockwise90° . T T urn clockwise. ater shuto drain plug W urn clockwise90° W T T urn clockwise. arm watertank ater shuto drain plug W urn clockwise90° W T arm watertank urn clockwise. ater shuto drain plug W counter arm watertank valve Filter Filter valve Filter Filter clockwise valve Filter Filter
Installing This Product Using This Product 41
cover . Battery LED Back
Battery cover Bracket Battery LED Back Remote Control Unit Battery Bracket Remote Control Unit Remote Control remote control unit back in its bracket. control remote Replace the back cover, and place the and place the back cover, Replace alkaline batteries) alkaline batteries with new ones (four 1.5V AA 1.5V AA ones (four with new batteries Remove the back cover and replace the and replace the back cover Remove 3. 2.
. Replacing the remote control batteries control remote the Replacing cover Correctly install the batteries with the positive (+) and negative (-) terminals facing facing (-) terminals and negative (+) positive with the the batteries install Correctly the directions as shown on the remote control unit case. control on the remote as shown the directions batteries. Do not mix old and new batteries Only use alkaline Battery LED Back Battery Bracket it from its bracket. it from Lift the remote control unit and remove unit and remove control Lift the remote Remote Control Unit The batteries provided with this product have been used have with this product provided batteries The finish and color the wall of the room, size Depending on the CAUTION: Replacing the Remote Control Batteries Control the Remote Replacing functioning before the battery LED begins to flash. LED begins to the battery functioning before available on the market. on the market. available stop unit may control the remote colors), (particularly dark to perform operational checks during the manufacturing, during the manufacturing, checks operational perform to of batteries than that be shorter may life so their service Replace the batteries with new ones using the following procedure. the following ones using with new the batteries Replace * * As the batteries weaken, the battery LED will begin to flash. begin to LED will battery the weaken, As the batteries LED will extinguish. the battery * Usually, 1. Using This Product Installing This Product 42 All functions Rear cleansingandfront cleansing please contact your localcustomer service representative. If you are unable to correct the problem using the troubleshooting procedures shown below, check thefollowing items. Beforeproduct.requestingplease repairs, this with problemsYou the of correctsome easily can Troubleshooting The system willnot Water doesnot operate at all. Symptom Symptom spray out.
The warm water tankisempty. if theseat isoccupied. the seat sensor to detect even Certain clothingisdifficultfor The seat sensorisnoton. Spray strength issetto “Lo”. Tap water pressure islow. seat sensor.the to Dirt orwater drops are covering The filter isclogged. closed. The water shutoff valve is control are exhausted. The batteries intheremote receiver isdirty. transmitter orseat unit’s light Remote control’s light Current isleaking. into thewall outlet. The power plugisnotplugged panel isoff. power LEDontheindicator The power switch isoff. The supplied to thepower outlet. Electricity isnotbeing Cause Cause Remove thedirt. request repairs. not operate, plug intheoutletagain.Ifitstill does outlet, wait afew minutes, andinsertthe Unplug thepower plugfrom thewall Plug thepower pluginto thewall outlet. seat unitto lightup. Seepage25. and getthepower indicator LEDonthe Press thePower button for 2seconds breaker, etc. Check for apower failure ortripped See page18. Carry outanoperational check. See page23. Place your handcloseto the seat sensor. page 23. change theway you sitonthetoilet. See Sit backfullyonthetoilet seat, or See page26. Set thespray strength to ahigherlevel. sensor. Seepage23. Remove the dirtorwater drops from the Clean thefilter. Seepage34. counterclockwise. Turn thewater shutoff valve See page41. Replace thebatteries withnew batteries. unplugthepower plugand Remedy Remedy
Installing This Product Using This Product 43 Remedy Remedy Remedy Remedy Disable power save. See page 29. save. Disable power auto-off heater seat Disable the toilet function. See page 30. Press the Dryer button and set the air button the Dryer Press See level. the appropriate to temperature page 28. again. See page 28. button the Dryer Press paper blocking the any Please remove sensor. seat the to temperature the seat Adjust See page 25. level. appropriate Adjust the water temperature to the to temperature water the Adjust See page 25. level. appropriate to 3 minutes about takes water The back. See page 23. warm See page 29. save. Disable power or change seat, Sit back fully on the toilet See page 23. toilet. sit on the you the way sensor. the seat to hand close your Place See page 23. Cause Cause Cause Cause Seat temperature is not set to is not set to temperature Seat level. an appropriate activated. is save Power off function auto heater seat The is operating. used for 4 minutes or longer. 4 minutes used for the seat paper covering Is any sensor? The seat sensor is not on. seat The clothing is difficult for Certain even detect sensor to the seat is occupied. if the seat an is not set to Air temperature level. appropriate drying function has been The Water temperature is not set temperature Water temperature. an appropriate to or bidet Cleansing The a long used for function was period of time. is activated. save Power warm. warm. to cool off. cool to finishing. Symptom Symptom Symptom Symptom not operate. Warm air stops air stops Warm suddenly before suddenly before Spray water is not water Spray the toilet seat begins seat the toilet does not switch off. does not switch The deodorizing fan deodorizing fan The The toilet seat is not seat toilet The Drying function does Dryer air is not warm. Dryer Heated toilet seat toilet Heated Deodorizing Warm air drying Warm Rear cleansing and front cleansing (continued) cleansing and front cleansing Rear After sitting for a while, a while, sitting for After Using This Product Installing This Product 44 flashing. The power LEDis correct position. and moves outofits The seat unitchatters Others WARNING WARNING Symptom : : causethisproduct to malfunctionand/or causeinjuryto users. repair, ormodifythisproduct. Doingsocould result inelectricshock,fire, or untilthesituation hasbeencorrected. power plugfrom thewall outlet,contact us,anddiscontinue usingthisproduct outlet,could cause injuryordamagetheproduct. Ifthisoccurs, remove the Do notallow anyone except anauthorized service technician to disassemble, A damagedoroverheated power plugorcord, oralooseoverheated wall maintenance onthetoilet. Or itistimeto perform functions. warm water orthetoilet seat There istrouble eitherwiththe malfunctioned. The flashingLEDfunctionhas The seat unitisnotlocked. Cause
call for repairs. power plugfrom thepower outlet,and to perform maintenance. Unplugthe A malfunctionhasoccured, oritistime the wall outletandrequest repairs. It isbroken. Pullthepower plugfrom it inposition.Seepage37. Push theseat unitfarther backandlock Remedy
Installing This Product Using This Product 45 DO NOT DISASSEMBLE WARNING Type No. Product No. Color Serial No. There is a danger of electric is a danger There shock, fire, and injury. shock, fire, Only authorized service service Only authorized authorized are technicians or repair disassemble, to modify this product. * Repairs after the warranty period has expired the warranty after Repairs Repairs requested after the warranty has the warranty after requested Repairs a cost. at be performed will expired service include: Technical repairs for Charges costs. + Parts fee COMPULSORY If the power cord is damaged or the outlet is loose. is damaged or cord If the power overheating. are cord plug and power the power outlet or The If there are any points that are unclear even though the product is being used in accordance with the user's manual. with is being used in accordance though the product unclear even are points that any are If there
Failure to do so could cause an electric shock or fire, fire, or shock electric an cause could so do to Failure WARNING or it may result in flooding of the room. in result or it may * * Failure to do so could cause electric shock or fire. do so could to * Failure immediately, and have the part repaired. and have immediately, the from or unit main the from leaking is water If plug from power unplug the supply system, water valve. shutoff outlet and close the water the power If the main unit, power plug, or power cord cord plug, or power If the main unit, power smoke, odor, noise, damaged (abnormal are unplug cracking), temperatures, high outlet power the from plug power the Preferred date for house call for date Preferred Type, Product No., Color No., Serial No. No., Color No., Product Type, side of the label on the reverse No. (See the Product Certificate.) Warranty (See your of installation Date Description of malfunction or abnormal condition. Address, Name, Telephone No. Telephone Name, Address, toilet lid.) toilet (Be as specific as possible.)
Details you will be asked Details you Repairs within the warranty period within the warranty Repairs 5. 2. 3. 4. 1. If this product breaks down, see "Troubleshooting" on page 62. Contact your local customer servie representative. servie representative. local customer your Contact on page 62. see "Troubleshooting" down, breaks If this product cases. in the following facility service a contact properly, is operating if the product even Furthermore, because if left uncorrected, facility a service contact occur, situations of the above If any persons. or injury to the unit danger of causing damage to run the you otherwise, IF YOU HAVE ANY QUESTIONS, OR PARTS ARE DAMAGED OR MISSING, PLEASE DO NOT DO NOT PLEASE OR MISSING, ARE DAMAGED OR PARTS ANY QUESTIONS, HAVE IF YOU THE STORE. OR RETURN, THIS PRODUCT TO CONTACT, REPRESENTATIVE. SERVICE CUSTOMER LOCAL YOUR CONTACT PLEASE HAVE. MAY YOU OR ISSUE CARE OF ANY QUESTION WE CAN TAKE STOP This product comes with a 2 year warranty. Keep your receipt as proof of purchase. Read the Read of purchase. as proof receipt your Keep warranty. with a 2 year comes product This place. in a secure this information Keep details of the warranty. purchase. When requesting repairs, be sure to have have to be sure repairs, requesting When need to may You available. receipt your of as proof of the receipt send a copy 4. If you want to know anything about the product or after-sales service or after-sales the product about anything know to want 4. If you 3. Requesting repairs 3. Requesting 2. Read the Warranty 2. Read
1. Before Requesting Repairs Requesting 1. Before After-sales Service After-sales Using This Product Installing This Product 46
is notauthorized andshouldnotbeattempted. This product isauthorized to beusedinyour country only. Useofthisproduct in any othercountry
Drying Rear and front cleansing front and Rear Product weight Product dimensions Maximum rating Tap water pressure range Water supplymethod Type Other functions Ambient operating temperatures Power cord Power save function CAUTION seat Toilet Deodorization Specifications Deodorizing cartridgeservice life Deodorizing capacity Deodorizing method Safety device Temperature adjustment Surface temperature Heater capacity Safety device adjustment Air temperature Air heater capacity Air volume Safety devices Warm water internal control temperature capacity Warm water heater volume Front cleansingspray volume Rear cleansingspray Nozzle holes Nozzles Warm water tankcapacity * Adjustable side-linedtoilet seat * * Seat heater auto off * * Seat sensor Thermal fuses,Hightemperature sensorswitch, Tank emptysensorcircuit Off (room temp.), Low (Approx. 87 °F(30.5 °C)),Middle(Approx. 93 °F(34°C)),High(Approx. 99°F(37 °C)) Off (water temp.), Low (approx. 97 °F(36°C)),Middle(approx. 100°F(38°C)),High(Approx. 104°F(40°C)) Toilet seat/toilet seat lidslow-down Seat unitslidingremoval mechanism 0.64 ~0.95 USqt.(0.6 to 0.9 L/min.) (adjustable in5stages) 0.64 ~0.95 USqt.(0.6 to 0.9 L/min.) (adjustable in5stages) For thefront cleansing:ø0.035 in(ø 0.9 mm)x10holes. 8.5 to 106.7psi (0.06 to 0.74 MPa, 0.6 to 7.5 kgf/cm One-touch power save (auto recovery after 8hours) For rear cleansing:ø0.04 in(ø 1.3mm)x2holes, 4-steps selectable(micro-computer controlled) Chemisorption usingadeodorizingcartridge Exclusive rear, front nozzles, auto slidetype Warm water storage 0.93 USqt.(0.88 L) Low (room temp.), Middle, High Direct connection to tapwater Effective length:3.3ft.(1.0 m) 32 °F(0°C)to 104°F(40°C) 10.6 ft 3.9 ft AC 120V, 301 W, 60Hz Width 16.8in(426mm)x Depth 21.5in(547 mm)x Approx. 8.9Ib(4.0 kg) Approximately 7years Height 6.4in(162mm) (Elongated type) D28005ARS141 3 Thermal fuses 3 /min. ( Thermal fuse /min. (0.3 m 250 W 130 W 45 W
* Rear Pulsating washing * Includedremote controller * Power switch * Toilet seat lidone-touch 0.11 m removal 3 3 /min.) /min.)
mechanism
2 ) ENGLISH
LIMITED WARRANTY
This toilet comes with a three year warranty on all parts of the toilet. If inspection of this DXV by American Standard plumbing product, inclusive of the chinaware and all mechanical parts, confirms that it is defective in materials or workmanship, DXV by American Standard will repair or, at its option, exchange the product for the same or a similar model.
This limited warranty applies only to the original non-commercial purchaser and installation of the products. In the event of a limited warranty claim, proof of purchase will be required—save sales receipts.
For this warranty to become effective, the warranty registration process must be completed via the internet or telephone per the warranty registration instructions.
This limited warranty does not apply to commercial installations. The warranty for commercial installations is two years on the toilet.
This warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of the product should check with a local building or plumbing contractor to ensure local code compliance before installation.
This warranty will be void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse, accident or other damage; if it was not installed in accordance with DXV by American Standard’s instructions; or if it has been modified in a manner inconsistent with the product as shipped by DXV by American Standard. The warranty will be void if the product has failed as a result of worn-out of consumable parts such as packing, fuses, batteries.
WARNING: This warranty DOES NOT COVER any damages caused by the use of harsh cleaners. These products can seriously corrode the product components. This damage can cause leakage and property damage. DXV by American Standard will not be responsible or liable for any damage caused by the use of in-tank cleaners.
DXV by American Standard’s option to repair or exchange the product under this warranty does not cover any labor or other costs of removal or installation including any costs of any surrounding material such as tile or marble. DXV by American Standard is not responsible for any other incidental or consequential damages attributed to a product defect. (Some states or provinces do not allow the exclusion or limitation of implied warranties, so this exclusion may not apply to you.)
This warranty gives you specific rights. You may have other statutory rights that may vary from state to state or province to province, in which case this warranty does not affect such statutory rights.
©2014 AS America Inc. 47 ENGLISH
How to register the warranty:
PLEASE COMPLETE DXV BY AMERICAN STANDARD WARRANTY REGISTRATION AND SAVE THIS WARRANTY INFORMATION.
IMPORTANT: Registration of the product must be completed for this warranty to become effective. your registration will make it easier to service your product.
INSTRUCTIONS: Register your toilet at www.DXV.com. Please save your point of purchase (sale receipt).
IF YOU HAVE ANY QUESTIONS, OR PARTS ARE DAMAGE OR MISSING, DO NOT CONTACT, OR RETURN, THIS PRODUCT TO THE STORE. CONTACT CUSTOMER SERVICE AT [email protected] OR TOOL FREE AT OUR GLOBAL HEADQUARTERS. CUSTOMER SPARE COMPONENTS PAGE CAN BE FOUND AT www.DXV.com.
In the United States: In Canada: In Mexico: DXV by American Standard DXV by American Standard DXV by American Standard One Centennial Avenue 5900 Avebury Road Via Morelos 330 Piscataway, New Jersey 08855 Mississauga, Ontario Col. Santa Clara Coatitla Attention: Director of Customer Care L5R 3M3 Ecatepec, Estado de México 55540 Canada For residents of the United States, warranty Toll Free: 01-800-8391200 information may also be obtained by calling Toll Free: 1-800-387-0369 www.DXV.mx the following toll free number: (800) 227-2734 Local: 905-306-1093 www.DXV.com Fax: 1-800-395-1498 www.DXV.ca
©2014 AS America Inc. GCW-1332-US-ASB(14030)