DOCSLIB.ORG

FOCUSING on CROSSOVER APPEAL, CÓRDOBA INTRODUCES NEW NECK OPTION on POPULAR MODELS Thinner Neck Profile Now Available on C9 & C10

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
FOCUSING on CROSSOVER APPEAL, CÓRDOBA INTRODUCES NEW NECK OPTION on POPULAR MODELS Thinner Neck Profile Now Available on C9 & C10 CONTACT CORDOBA MUSIC GROUP Media Contact: Kim White 310.857.1705 [email protected] RELEASE FOCUSING ON CROSSOVER APPEAL, CÓRDOBA INTRODUCES NEW NECK OPTION ON POPULAR MODELS Thinner Neck Profile Now Available on C9 & C10 SANTA MONICA, CA – Due to the great success of Córdoba’s Luthier Series, an affordable line of all solid, concert level instruments, Córdoba is proud to the C9 Crossover and C10 Crossover. Córdoba’s C9 and C10 serve as the heart of the Luthier series; both are offered with the choice of a solid European spruce or solid Canadian cedar top, paired with either solid mahogany (C9) or solid Indian rosewood (C10) back and sides. The Crossover models feature a 48mm nut width, radiused fingerboard, and hand-carved mahogany neck with a thinner profile. The foundation of the Luthier Series rests upon building methods such as the Spanish Heel, hand-carved necks and braces, and domed soundboards which are built on a traditional solera. All models in the Luthier Series feature a mother-of-pearl hand-inlaid rosette inspired by a 1920s Domingo Esteso rosette, and include a humidified hardshell case. C9 Crossover – Street $799 C10 Crossover – Street $999 Founded in 1997, Córdoba seeks to guide the evolution of the nylon string guitar, blending traditional craftsmanship of the early master luthiers with modern developments. Inspired by the organic beauty and honesty of acoustic instruments, every Córdoba is lightweight, responsive, and a direct descendant of the Spanish tradition. Córdoba continues to challenge the definition of the acoustic guitar without sacrificing the authenticity of its heritage. Learn more at www.cordobaguitars.com. Visit Córdoba Guitars’ exhibit at the 2014 Winter NAMM Show, located at Booth 5310. Enc image: c9_sp_crossover.jpg ### CONTACT CORDOBA MUSIC GROUP Media Contact: Kim White 310.857.1705 [email protected] RELEASE CÓRDOBA GUITARS EXPANDS OFFERING OF PARLOR SIZE GUITARS Building on Success with Small Body Models, Córdoba Launches the C10 Parlor SANTA MONICA, CA – Córdoba has increased their offering of parlor size guitars, targeting the player looking for the feel, comfort, and ease of playability that a smaller instrument provides. On the heels of the Córdoba Torres and C9 Parlor, Córdoba is excited to announce the launch of the C10 Parlor, a new size option for the best-selling C10. Featuring a solid Canadian cedar or European spruce top and solid Indian rosewood back and sides, the C10 Parlor has a slightly reduced body size and scale length (630mm). It is handmade by a small team of builders in a boutique workshop, using traditional Spanish construction techniques such as the Spanish heel, hand carved neck and braces, and a domed soundboard built on a traditional solera. Like all models in Córdoba’s Luthier series, the C10 Parlor features the signature mother-of-pearl hand-inlaid rosette inspired by a 1920s Domingo Esteso rosette, a two-way adjustable truss rod, Córdoba’s premium black and gold tuning machines, and a deluxe Córdoba humidified archtop wood case. C10 Parlor Specs: Solid Canadian cedar or European spruce top, solid Indian rosewood back and sides, mahogany neck, ebony fingerboard, natural high gloss PU finish, 50mm nut width, 630mm scale length, Savarez Cristal Corum strings. Includes deluxe Córdoba humidified archtop wood case. Street: $999 Founded in 1997, Córdoba seeks to guide the evolution of the nylon string guitar, blending traditional craftsmanship of the early master luthiers with modern developments. Inspired by the organic beauty and honesty of acoustic instruments, every Córdoba is lightweight, responsive, and a direct descendant of the Spanish tradition. Córdoba continues to challenge the definition of the acoustic guitar without sacrificing the authenticity of its heritage. Learn more at www.cordobaguitars.com. Visit Córdoba Guitars’ exhibit at the 2014 Winter NAMM Show, located at Booth 5310. Enc image: c10_parlor_front.jpg ### CONTACT CORDOBA MUSIC GROUP Media Contact: Kim White 310.857.1705 [email protected] RELEASE CÓRDOBA RELEASES FIRST LINE OF STEEL STRING GUITARS New Acero Series Incorporates Spanish Building Techniques SANTA MONICA, CA – Córdoba Guitars is proud to launch the Acero series, their first steel string line comprised of six dreadnought models. Córdoba approached these guitars from a classical guitar building perspective, using a Spanish heel neck joint along with a hybrid Spanish fan and X-bracing pattern. These design features offer a lighter weight and more stable heel joint that increases resonance. The hybrid fan/X- bracing pattern allows the top to move freely with an explosive attack and rich, warm tone reminiscent of a nylon string guitar. Each model is built with either a solid Sitka spruce or solid Engelmann spruce top, with the options of solid mahogany, solid rosewood, or solid acacia back and sides. Select models feature the Acoustic Fidelity System (AFS), Córdoba’s new proprietary pickup that offers both piezo and mic blending capabilities. The Acero Series Lineup: D9 – Street $699 D9-CE – Street $849 D10 – Street $849 D10-CE – Street $999 D11 – Street $899 D11-CE – Street $1049 Founded in 1997, Córdoba seeks to guide the evolution of the acoustic guitar, blending traditional craftsmanship of the early master luthiers with modern developments. Inspired by the organic beauty and honesty of acoustic instruments, every Córdoba is lightweight, responsive, and a direct descendant of the Spanish tradition. Córdoba continues to challenge the definition of the acoustic guitar without sacrificing the authenticity of its heritage. Learn more at www.cordobaguitars.com. Visit Córdoba’s exhibit at the 2014 Winter NAMM show, located at Booth 5310. Enc image: d11ce_front_11-13.jpg ### CONTACT CÓRDOBA MUSIC GROUP Media Contact: Kim White 310.857.1705 [email protected] RELEASE CÓRDOBA ROUNDS OUT 30 SERIES UKULELES WITH CUTAWAY-ELECTRIC OPTIONS Córdoba’s All Solid “Miniature Guitars” are Now Stage-Ready SANTA MONICA, CA – Building on the success of the four all-solid 30 Series tenor ukuleles, Córdoba has launched a cutaway-electric version of each model, fitted with an LR Baggs Five.O pickup. Just like their full body counterparts, these ukuleles were designed in conjunction with renowned luthier Pepe Romero, Jr., and are built more like small classical guitars than traditional ukuleles. Other features of Córdoba’s 30 Series ukuleles include a Spanish heel neck joint, fan bracing, wider fingerboard, and deeper and wider body, which unite to form an extremely lightweight ukulele with incredible projection. Entirely handmade, the 30 Series are Córdoba’s first ukuleles featuring twelve frets to the body rather than fourteen. This creates greater movement of the soundboard, greater resonance and volume, and a warm, balanced tone. Widely regarded as the best ukulele pickup on the market, the LR Baggs Five.O is like a miniaturized version of their award-winning Element pickup, and also includes a soundhole mounted volume control and miniature endpin preamp. Each 30 Series ukulele features premium all solid woods, an abalone rosette, Grover tuning machines, and includes a durable Córdoba polyfoam case. The 30 Series Lineup: 30T – Street $499 30T-CE – Street $649 32T – Street $549 32T-CE – Street $699 35T – Street $599 35T-CE – Street $749 35TS – Street $599 35TS-CE – Street $749 Founded in 1997, Córdoba seeks to guide the evolution of acoustic guitars and ukuleles, blending traditional craftsmanship of the early master luthiers with modern developments. Inspired by the organic beauty and honesty of acoustic instruments, every Córdoba is lightweight, responsive, and a direct descendant of the Spanish tradition. Córdoba continues to challenge the definition of the acoustic guitar without sacrificing the authenticity of its heritage. Learn more at www.cordobaguitars.com. Visit Córdoba Guitars’ exhibit at the 2014 Winter NAMM Show, located at Booth 5310. Enc image: 35tce_front.jpg ### CONTACT CORDOBA MUSIC GROUP Media Contact: Kim White 310.857.1705 [email protected] RELEASE CÓRDOBA LAUNCHES NEW 22 SERIES UKULELES Popular Combination of Spruce & Rosewood Now Available in All Ukulele Sizes SANTA MONICA, CA – Following the success of Córdoba’s all-mahogany 20 Series ukuleles, Córdoba is excited to announce the next step up. The 22 Series ukuleles are available in soprano, concert, tenor, tenor cutaway-electric, and baritone sizes. Each features a solid spruce top paired with rosewood back and sides, rosewood bridge, fingerboard, and headstock veneer, and mahogany neck. The aesthetic is subtle and refined, with a timeless hand-inlaid wooden rope rosette and matching purfling. The 22 Series was created to bring the most popular guitar tonewood combination of spruce and rosewood to the ukulele. The 22 Series Lineup: 22S – Street $179 22C – Street $189 22T – Street $199 22T-CE – Street $229 22B – Street $209 Founded in 1997, Córdoba seeks to guide the evolution of acoustic guitars and ukuleles, blending traditional craftsmanship of the early master luthiers with modern developments. Inspired by the organic beauty and honesty of acoustic instruments, every Córdoba is lightweight, responsive, and a direct descendant of the Spanish tradition. Córdoba continues to challenge the definition of the acoustic guitar without sacrificing the authenticity of its heritage. Learn more at www.cordobaguitars.com. Visit Córdoba Guitars’ exhibit at the 2014 Winter NAMM Show, located at Booth 5310. Enc image: 22c_front.jpg
Load more

Recommended publications
  • JMC Soundboard the Loudspeaker Made out Tonewood
    JMC Soundboard The loudspeaker made out tonewood www.jmclutherie.com Page | 0 Page | 1 www.jmclutherie.com The mission of JMC Lutherie is to ensure that lutherie puts down solid roots in 21st century reality and, wherever there is noise and sound, to harmoniously transform it into music. www.jmclutherie.com Page | 2 JMC Soundboard Sound at its most natural The “Soundboard” is named after the truly attending a concert. Since the music is literally crucial vibrating part of certain musical “played” on an authentic musical instrument, the instruments. The JMC Soundboard is a perception of the instruments and voices gives loudspeaker with a resonance spruce membrane hearers the impression that the musicians are built using lutherie techniques. The result is actually in the same room, or a sense of being aesthetically pleasing with an airily-mounted, whisked off to the place where the concert is slightly curving square-shaped membrane. The being performed. This is true with any type of sound is amazingly accurate, warm and brilliant, music, of which a single stereophonic pervading the entire open space due to the fact Soundboard is able to convey the three- that its wave is not of the focal type, but is dimensional nature of music. instead omnidirectional. Thus, whether a home if an open-plan, two-floor building or U-shaped, At JMC Lutherie, listening pleasure lies at the the music can be heard and felt throughout. very heart of our profession and our daily The verb “feel” is entirely justified for this concerns. musical sensation akin to that experienced in Page | 3 www.jmclutherie.com Technical information The illustration compares the auditory impression when listening to music with the Soundboard or with loudspeakers.
    [Show full text]
  • Luthier Rob Engel Started Taking out These Guitars, and They Were Just Phe - by Marc A
    attic – he had a sort of workshop up there – and he Luthier Rob Engel started taking out these guitars, and they were just phe - by Marc A. Ybaben, Ph.D. nomenal pieces of work! I mean they were beautiful; each one was an original piece. Some of them he had worked on with a guy named Tom Doyle – he’s a gui - tar maker and pickup maker from New Jersey – they had been buddies and they had worked together on dif - ferent stuff, and the bug bit me right there! I started looking at the guitars and I guess he saw the expression on my face, and he said, “Well, you can do this, you know.” And I was thinking, “Yeah, right!” but I really had to give it a shot, so I did. I went out and bought all kinds of books, and I already had a garage in the back of my house that served as a wood shop — which is what I did for a living anyhow — and I got started by Photo courtesy Paul Johnson bringing wood home from jobs that were scraps and left-overs, basically practicing until I started to under - hanks to the wonders of YouTube, a friend sent stand how things worked. Then Lenny introduced me me a video of an East Coast guitarist named Bob to Tom Doyle, and he got me a job with Tommy; I TDeVos. I immediately noticed two things: that worked with him for about three years. I really wasn’t Bob was a monster player – incredible lines and sound! making any money there, so I went back to cabinet – and that he played a very cool-looking guitar.
    [Show full text]
  • Pete Graves – Acoustic Luthier
    Pete Graves – Acoustic Luthier In 2013 one of my grandsons wanted an acoustic The wood for the back and sides (ribs) is usually guitar to add to the collection of electric guitars that the same, and I have used Indian rosewood, he plays. Rather than buy one I decided to have a quilted maple and English walnut to make three go at making one and bought a book entitled guitars. Utile (a mahogany type) and maple are Guitar Making by Cumpiano & Natelson, which used for the neck. There are a number of on-line turned out to be an excellent guide. However, it suppliers of wood but I use a 'Fred in a shed' luthier contained too much descriptive text so I distilled in Durham who is very helpful and belt-sands the much of it into a series of process steps that an wood to the required thicknesses. engineer could follow! So far I have made two classical guitars and one A key aspect for the starting point for building an steel-string (aka Western) guitar. acoustic guitar is the choice of wood. The top, back and sides are made from high quality book- matched pairs of wood, <2.5mm thick, and straight, fine-grained spruce is the favoured wood for the soundboard. Steel string guitar with quilted maple back and ribs with ebony bindings Pete Graves – Acoustic Luthier The Build Process The neck and headpiece is made by cutting and gluing two pieces of dimensioned wood together at an angle of 15°. Blocks of matching wood are glued at the heel end where the neck joins the guitar body.
    [Show full text]
  • Luthier's Dictionary
    LUTHIER’S DICTIONARY ©2014 The European Guitar Builders Association ©2014 The European Guitar Builders Association Woods ENGLISH DUTCH GERMAN FINNISH FRENCH ITALIAN SPANISH SWEDISH LATIN Alder Elzen Erle Leppä Aulne Ontano Aliso Al Alnus Alder / european, black, Elzen / Europees, Erle Leppä / eurooppalainen Aulne européen Ontano europeo Aliso Europeo Al (Klibbal) Alnus glutinosa common zwart, gewoon Alder / red, western red Elzen Erle Leppä / amerikkalainen Aulne rouge, Aulne Ontano americano Aliso Rojo Rödal Alnus rubra américain Arctic Birch Berken Birke Jääkoivu Bouleau arctique Betulla artica (bianca) Abedul del Ártico Björk Betula pendula Ash Essen Esche Saarni Frêne Frassino Fresno Ask Fraxinus Ash / american Amerikaans essen Esche Saarni / amerikkalainen Frêne américain Frassino americano Fresno Americano Vitask Fraxinus americana Ash / European Europees essen Esche Saarni / eurooppalainen Frêne européen Frassino europeo Fesno europeo Europeisk ask Fraxinus excelsior Ash / Swamp Ash Moeras essen Sumpfesche Suosaarni Frêne des marais Frassino palustre Fesno del Pantano Svartask Fraxinus nigra Basswood Linden Linde Lehmus Tilleul Tiglio Tilo Lind Tilia americana Bubinga Bubinga Bubinga Bubinga Bubinga Bubinga Bubinga Bubinga Guibourtia spp. (G. demeusei, G. pellegriniana, G. tessmannii, etc.) Cocobolo Cocobolo Cocobolo Cocobolo Coccobolo Cocobolo Cocobolo Mexikansk jakaranda Dalbergia retusa Ebony / African Afrikaans ebben Ebenholz Eebenpuu / Ébène Ebano africano Ébano Africano Ebenholts Diospyros crassiflora afrikkalainen Ebony /
    [Show full text]
  • Classifying Xylophone Bar Materials by Perceptual, Signal Processing
    Classifying xylophone bar materials by perceptual, signal processing and wood anatomy analysis Loïc Brancheriau, Henri Baillères, Pierre Détienne, Richard Kronland, Bloen Metzger To cite this version: Loïc Brancheriau, Henri Baillères, Pierre Détienne, Richard Kronland, Bloen Metzger. Classifying xylophone bar materials by perceptual, signal processing and wood anatomy analysis. Annals of Forest Science, Springer Nature (since 2011)/EDP Science (until 2010), 2006, 63 (1), pp.73-81. hal- 00883958 HAL Id: hal-00883958 https://hal.archives-ouvertes.fr/hal-00883958 Submitted on 1 Jan 2006 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Ann. For. Sci. 63 (2006) 73–81 73 © INRA, EDP Sciences, 2006 DOI: 10.1051/forest:2005099 Original article Classifying xylophone bar materials by perceptual, signal processing and wood anatomy analysis Loïc BRANCHERIAUa*, Henri BAILLÈRESa, Pierre DÉTIENNEa, Richard KRONLANDb, Bloen METZGERb a CIRAD - Forêt, TA10/16, avenue Agropolis, 34398 Montpellier Cedex 5, France b CNRS – LMA, 31 chemin Joseph-Aiguier, 13402 Marseille Cedex 20, France (Received 10 December 2004; accepted 18 May 2005) Abstract – Several different areas of expertise are required to analyse the acoustic qualities of wood. The practical experience of musical instrument makers is extremely valuable, especially with respect to selecting the most suitable wood species for different applications.
    [Show full text]
  • Acoustical Studies on the Flat-Backed and Round- Backed Double Bass
    Acoustical Studies on the Flat-backed and Round- backed Double Bass Dissertation zur Erlangung des Doktorats der Philosophie eingereicht an der Universität für Musik und darstellende Kunst Wien von Mag. Andrew William Brown Betreuer: O. Prof. Mag. Gregor Widholm emer. O. Univ.-Prof. Mag. Dr. Franz Födermayr Wien, April 2004 “Nearer confidences of the gods did Sisyphus covet; his work was his reward” i Table of Contents List of Figures iii List of Tables ix Forward x 1 The Back Plate of the Double Bass 1 1.1 Introduction 1 1.2 The Form of the Double Bass 2 1.3 The Form of Other Bowed Instruments 4 2 Surveys and Literature on the Flat-backed and Round-backed Double Bass 12 2.1 Surveys of Instrument Makers 12 2.2 Surveys Among Musicians 20 2.3 Literature on the Acoustics of the Flat-backed Bass and 25 the Round-Backed Double Bass 3 Experimental Techniques in Bowed Instrument Research 31 3.1 Frequency Response Curves of Radiated Sound 32 3.2 Near-Field Acoustical Holography 33 3.3 Input Admittance 34 3.4 Modal Analysis 36 3.5 Finite Element Analysis 38 3.6 Laser Optical Methods 39 3.7 Combined Methods 41 3.8 Summary 42 ii 4 The Double Bass Under Acoustical Study 46 4.1 The Double Bass as a Static Structure 48 4.2 The Double Bass as a Sound Source 53 5 Experiments 56 5.1 Test Instruments 56 5.2 Setup of Frequency Response Measurements 58 5.3 Setup of Input Admittance Measurements 66 5.4 Setup of Laser Vibrometry Measurements 68 5.5 Setup of Listening Tests 69 6 Results 73 6.1 Results of Radiated Frequency Response Measurements 73 6.2 Results of Input Admittance Measurements 79 6.3 Results of Laser Vibrometry Measurements.
    [Show full text]
  • The Push for New Laws and Industry Practices in American Instrument Making
    William & Mary Environmental Law and Policy Review Volume 2013-2014 Issue 1 Article 6 December 2013 Good Vibrations: The Push for New Laws and Industry Practices in American Instrument Making Patrick Genova Follow this and additional works at: https://scholarship.law.wm.edu/wmelpr Part of the Environmental Law Commons, and the International Trade Law Commons Repository Citation Patrick Genova, Good Vibrations: The Push for New Laws and Industry Practices in American Instrument Making, 38 Wm. & Mary Envtl. L. & Pol'y Rev. 195 (2013), https://scholarship.law.wm.edu/wmelpr/vol38/iss1/6 Copyright c 2013 by the authors. This article is brought to you by the William & Mary Law School Scholarship Repository. https://scholarship.law.wm.edu/wmelpr GOOD VIBRATIONS: THE PUSH FOR NEW LAWS AND INDUSTRY PRACTICES IN AMERICAN INSTRUMENT MAKING PATRICK GENOVA* INTRODUCTION In recent years the market for illegal wood has ballooned into a fifteen billion dollar industry.1 Rainforests in places like Peru are being plundered, with over one-third of rare wood exports leaving the country illegally.2 An estimated forty to sixty-three percent of the wood trade in Indonesia comes from illegal harvesting.3 Increased demand and scarcity, along with tightening regulations, have led to a growing illegal market that endangers the sustainability of legitimate wood sourcing.4 A number of industries rely on rare wood, including the energy, building, furniture, and instrument making industries.5 Many of these mar- kets, including musical instruments, have not found suitable replacements to make a large impact on dwindling wood supplies.6 The intricate balance between environmental conservation and economic marketability is par- ticularly hard for American manufacturers.7 The Lacey Act places tough restrictions on supply chains to ensure that wood imports are legal.8 The Lacey Act places the burden on American manufacturers while allowing export nations to continue relaxed administration that encourages illegal * Patrick Genova is a 2014 J.D.
    [Show full text]
  • Meet the Luthier: Tim Reede
    the front. This is done to reduce feedback and also because an Meet The Luthier... electromagnet pickup has been added. The body size has been As a child in the sixties, Tim remembers hearing music that opened a reduced and there are two whole new dimension of expression. Bands like Jefferson Airplane, Jimi output jacks, one for the electro Hendrix and Crosby Stills Nash and Young. This attraction led him to work magnet pickup and one for the with music for much of his life. piezo soundboard transducer. In high school, he worked with a mobile sound system which traveled to I enjoy the diversity of the guitar small towns for school dances. And with the money he earned, bought a used electric guitar. As he grew older, Tim worked as a DJ for a radio family, which is why I make a station and a college nightclub. In 1986, he went to school at the variety of instruments, each Recording Workshop in Ohio and studied sound engineering. And, in 1988, having their strengths and Tim began modifying guitars for himself and others, trying to make guitars purpose. You could say I am a play and sound better. - Duane M Evarts, editor traditionalist when it comes to guitar construction. I use hot hide glue because it is acoustically Share the circumstances that led you to become involved in the art transparent. It dries very hard, allowing vibrations to transfer of lutherie. cleanly. In 1992, I enrolled in the cabinetmaking program at Minneapolis What sets you and your guitars apart from other fine luthiers and Technical College.
    [Show full text]
  • Woodworking Glossary, a Comprehensive List of Woodworking Terms and Their Definitions That Will Help You Understand More About Woodworking
    Welcome to the Woodworking Glossary, a comprehensive list of woodworking terms and their definitions that will help you understand more about woodworking. Each word has a complete definition, and several have links to other pages that further explain the term. Enjoy. Woodworking Glossary A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | #'s | A | A-Frame This is a common and strong building and construction shape where you place two side pieces in the orientation of the legs of a letter "A" shape, and then cross brace the middle. This is useful on project ends, and bases where strength is needed. Abrasive Abrasive is a term use to describe sandpaper typically. This is a material that grinds or abrades material, most commonly wood, to change the surface texture. Using Abrasive papers means using sandpaper in most cases, and you can use it on wood, or on a finish in between coats or for leveling. Absolute Humidity The absolute humidity of the air is a measurement of the amount of water that is in the air. This is without regard to the temperature, and is a measure of how much water vapor is being held in the surrounding air. Acetone Acetone is a solvent that you can use to clean parts, or remove grease. Acetone is useful for removing and cutting grease on a wooden bench top that has become contaminated with oil. Across the Grain When looking at the grain of a piece of wood, if you were to scratch the piece perpendicular to the direction of the grain, this would be an across the grain scratch.
    [Show full text]
  • Precious Woods Background Paper 1
    Chatham House Workshop: Tackling the Trade in Illegal Precious Woods 23-24 April 2012 Background Paper 1: Precious Woods: Exploitation of the Finest Timber Prepared by TRAFFIC Authors: Section 1: Anna Jenkins, Neil Bridgland, Rachel Hembery & Ulrich Malessa Section 2: James Hewitt, Ulrich Malessa & Chen Hin Keong This review was commissioned from TRAFFIC by The Royal Institute of International Affairs (Chatham House), London UK. TRAFFIC supervised the elaboration of the review with support of Ethical Change Ltd, Llanidloes UK. The review was developed as one of three studies to explore the social and ecological impacts of trade, related exporting and importing country regulations as well as to develop recommendations to reduce the negative impacts of trade in precious woods species. Contact details of lead authors and supervisor: Section 1 & Appendices Anna Jenkins Ethical Change Ltd Tryfan, Llanidloes, SY18 6HU, Wales, UK [email protected] Section 2 James Hewitt [email protected] Section 1 & 2 (technical supervisor) Ulrich Malessa TRAFFIC WWF US 1250 24 th ST NW, Washington, DC 20037, USA [email protected] 2 Contents Contents ............................................................................................................................................................................................. 3 Acknowledgments ....................................................................................................................................................................... 4 Section 1 ............................................................................................................................................................................................
    [Show full text]
  • A C O U S T I C & C L a S S I C
    P L A Y E R S | L U T H I E R S | C O L L E C T O R S GA C O U US T I C & IC L TA S S I AC A L RBENCIssue 1H 2012 Interviews with: Steve Baughman Laurent Brondel Aaron Green Discover: Ryan guitars Vintage Martins Monkeypod Reviews And much more... G U I T A R B E N C H E D I T O R S N O T E EDITOR: Terence Tan Thank you for looking over the first issue of CO-EDITOR: Nena Ganesan Guitarbench magazine! SALES/MARKETING: Jessica Pau Contributors: Anton Emery, Kevin Ryan, Jessica Pau Over the past 5 years, our website has grown WEBSITES: guitarbench.com into a significant information store with over Our Online Magazine: guitarbench.com 590 published posts and numerous features. This magazine is conceived to break the digital coding barrier to allow us to develop better stories and an unlimited canvas upon which we can deliver the articles we love to produce. The information and advertising set forth herein has We will still be producing articles on guitar been obtained from sources believed to be accurate. The profiles, construction and tonewoods - In this publisher, however, does not warrant complete accuracy of such information and assumes no responsibility for any issue, you’ll find interviews with prominent consequences arising from the use thereof or reliance steel string and classical luthiers- Laurent thereon. Publisher reserves the right to reject or cancel any Brondel and Aaron Green, a slew of great advertisement or space reservation at any time without notice.
    [Show full text]
  • Yearbook 2017 the European Guitar Builders Association (EGB) Is an Alliance Formed by Professional Independent European Luthiers
    Yearbook 2017 The European Guitar Builders association (EGB) is an alliance formed by professional independent European luthiers. It was founded with the goal of organizing the independent luthiers, as well as people related to the field of guitar building, all across Europe. Why was the EGB founded? There are rumors that the electric guitar is dying. Well, we don’t happen to think so. The aim was twofold: to create a community dedicated to the support of luthiers and Yes, there are deep changes happening in today’s world and the music scene. Some their work all across Europe and to increase the visibility of the art and craft of guitar of the large companies are struggling, that is true, but we also see many areas where building in a larger public forum. the guitar is alive and well, with young players (many of them female) passionate about the instrument, charting new paths, creating new sounds and songs. And In 2012 a small group of European luthiers got together at the Montreal Guitar Show. as small builders we share that passion - and we are able to move nimbly with the There had been many intense discussions about the fact that there were no congenial times, to offer today’s musician the service and personal attention the industry can’t. platforms to present their work in Europe, especially for electric guitar builders. So this group of originally 6 luthiers together with 4 others decided to actively pursue What makes a luthier-built guitar so special? the idea of an international organization and a special guitar exhibition.
    [Show full text]