Owner's Manual Carefully and Familiarize Yourself with the Equipment Descriptions and Operating Instructions Before Driving

OWNER’S MANUAL

CUSTOMER ASSISTANCE

In our constant endeavor to provide assistance and complete service backup, TATA MOTORS has established an all India customer assistance centre. In case you have a query regarding any aspect of your vehicle, our Customer Assistance Centre will be glad to assist you on our Toll Free no. 1800 209 7979. You can also approach nearest TATA MOTORS dealer. A separate Dealer network address booklet is provided with the Owner’s manual. TATA MOTORS 24X7 Roadside Assistance Program offers technical help in the event of a breakdown. Call to the toll-free Roadside Assistance.

For additional information, refer to "24X7 Roadside Assistance" section in the Owner’s manual.

Dear Customer,

Welcome to the TATA MOTORS family.

We congratulate you on the purchase of your new vehicle and are privileged to have you as our valued customer.

We urge you to read this Owner's Manual carefully and familiarize yourself with the equipment descriptions and operating instructions before driving.

Always carry out prescribed service / maintenance work as well as any required repairs at an authorized TATA MOTORS Dealers or Authorized Service Centre’s (TASCs). Use only genuine parts for continued reliability, safety and performance of your vehicle.

You are welcome to contact our dealer or Customer Assistance toll free no. (1800 209 7979) in case of any query or support required.

We wish you a safe and pleasant driving experience.

Bombay House, 24, Homi Modi Street, Hutatma Chowk, Fort, Mumbai – 400001

3 IMPORTANT INFORMATION

 Before driving, read this Owner’s manual carefully and familiarize yourself with For your own safety and a longer vehicle life, your vehicle. follow the instructions given under the  The Owner’s manual and other booklets are important documents and should headings ‘Warnings’ and ‘Notes’ in this always be kept in the vehicle. If you sell the vehicle, always pass on the docu- manual. Ignoring them could result in dam- ments to the new owner. age to the vehicle or personal injury to you  This Owner's Manual describes all variants of the model and all standard/op- or others. tional equipment of your vehicle available at the time of printing. Please note that your vehicle may not be equipped with all features described. WARNING !  TATA MOTORS Limited reserves the right to introduce changes in the design, Warning notes make you aware of dan- equipment and technical features without any obligation to install them on the gers which could pose threat to your or vehicles previously sold. The equipment in your vehicle may therefore differ from others health or life and possibility of that shown in the descriptions and illustrations. damage to the vehicle.  Do not carry out any modification including fitment of non-genuine accessories on your vehicle. Safety, handling, performance and durability, may otherwise be NOTE adversely affected and may violate government regulations. TATA MOTORS Lim- Indicates additional information that ited accepts no liability for damage resulting from the modifications or use of non- will assist you in gaining the optimum genuine accessories. benefit and care for your vehicle.  All rights reserved. The information in this manual shall not be copied, translated or otherwise reproduced, in whole or in part, without written permission from TATA MOTORS.

4 CONTENTS

1 Safety 2 Opening & Closing 3 Dashboard & Features

Safe Driving ………………….... 12 Key……..……………….….….....32 Cockpit……………………………44

Occupant Safety…….………… 14 Doors……………………………..35 Instrument Cluster I …………….45

Seat Belts……………………… 15 Windows…………………………36 Driver Information Screen..….. 49

Child Safety...…...... 19 Bonnet…………………………...38 Instrument Cluster II……...……..63

Child Restraint System (CRS).. 19 Tailgate………………..…...……39 Driver Information Centre…...…..64

Child Lock……………………. .22 Fuel lid.……………...…....…..…40 Warning Lamps……...…………...69

Air Bags……………………….….24 Audio Reminders….………...... 75

ABS……………………….…… 28 Headlamps…....………..………...75

EBD…………………………… . 29 Daytime Running Lamps (DRL)...77

Immobilizer-Anti-Theft Device.... 30 Combi-Switch…...…….……….…78

Fascia Switches……………….....81

Mic..….….…..…..….……....….....81

5 CONTENTS

3 Dashboard & Features 4 Stowage Areas 5 Climate Control

Steering Wheel Switches….…...82 Storage Compartments…………88 Air Distribution……..….….……....96

Infotainment System….………...82 Top Stowage Compartments…..89 Air Vents….…...... ………..…….…97

Speakers………...……………....83 Chiller Glove Box....………...... 89 FATC………………..….….…….. 98

Audio Amplifier ...…………….... 83 Lower Glove Box....………...... 89 HVAC………………………….….102

Power Socket…...……………....83 Below arm rest....………...... 90

USB/Aux Port…...……………….83 Cup Holders...….....….….……...90

Smart USB Charger…...... ….84 Utility pockets on doors…...... …91

Roof Lamps…..………………….85 Tailgate Compartment………….92

Lights…..…………………. 86 Coat hook……...………………...94

Sun Blinds….....…...... …...…...... 86

6 CONTENTS

6 Starting & Driving 7 Driver Assist 7 Driver Assist

Pre-Driving Checks…...... 108 Electronic Stability Program……128 Rain & Light Sensor………….....133

Driving Tips...... 109 Traction Control System...... 128 Reverse Park Assist.……...... ….135

Seat Adjustments...... 112 Vehicle Dynamic Control...... 128 Audio Setting……….……...... ….141

Rear View Mirrors...... 114 Roll over Mitigation...... 129

Sun Visors...... 115 Corner Stability Control…...... 129

Steering Wheel Adjustments.....116 Electronic Brake Pre-fill………...129

Starting the Engine...... 117 Engine Drag Torque Control…...129

Gear Shifting & Driving...... 118 Hill Descent Control (HDC)…….129

Braking…...... 123 Hill Hold Control (HHC)...... 130

Vehicle Parking...... 125 Torque On Demand (TOD)….…130

Cruise Control….……….....…....131

7 CONTENTS

Emergency & Break- 10 Maintenance 8 Drive Modes 9 down Assistance Maintenance & Service…...... 174 Drive Modes…….…………….....144 Emergency Equipment...... 150 Engine Compartment...... 175 Control Switches….………….....144 Tool Kit………...... ….....151 Engine Oil……...... 176 Drive Mode Functionality……....145 Hazard Warning Switch...... 151 Brake Fluid Level…...... 177 Inertia Switch………...... ……...152 Engine Coolant Level…...... 177 In Case of Flat Tyre...... 153 Power Steering Fluid Level...... 178 Jump Lead Starting...... 157 Windshield Washer Fluid Level.178 Towing...... 159 Battery.…...... ……...... 179 Fuses...... 161 Turbocharger…...... 179 Bulb Specification...... 167 Intercooler……...... 180 24x7 Road Assistance...... 169 Catalytic Converter...... 180

Tyres...... 181

8 CONTENTS

10 Maintenance 11 Technical Information Vehicle Care and Value 12 Added Services Key Battery Replacement……….185 Fuel Specification...... 200 Vehicle Care...... 210

On Board Diagnostic (OBD)...... 186 Lubricant Specification...... 201 Washing...... 210

Service Instructions...…………...187 Technical Specification...... 204 Waxing...... 211

Service Schedule...……..…...... 188 Vehicle Dimensions...... 207 Polishing...... 211

Interior Fabric Cleaning...... 211

Paint Care...... 211

Wiper Care...... 212

Extended warranty...... 213

Value Added Services...... 215

9 CONTENTS

Warranty – Terms and 13 Conditions

14 Environment Safety

Vehicle Service and 15 Service Coupon

SAFETY

Safe Driving Safety tips Do not drink or take drugs and drive or Safety consciousness not only ensures  Always take into account the road, allow anyone to drive who has been your safety and the safety of other road weather conditions, vehicle distance drinking or taking drugs. users, but it also helps to reduce the wear in order to prevent accidents. and tear on your vehicle.  If your vehicle is equipped with info-  Turn ‘ON’ the side indicators at least tainment/navigation system, set and meters before taking a turn or 30 make changes to your travel route Safe driving depends on: changing the lane. only when the vehicle is parked.  How quickly you make decisions to  Decelerate to a safe speed before tak-  Program radio presets with the vehicle avoid an accident. ing turn. Avoid braking during corner- parked, and use your programmed Your ability to concentrate. ing.  presets to make radio use quicker and  How well you can see and judge ob-  When overtaking other vehicles, simpler. jects. watch out for the oncoming vehicle.  How well familiar you are with your ve-  Never drive under the influence of al- Driving through water hicle controls and its capabilities. cohol or drugs. Do not drive through flooded areas. Judge the depth of water before driving through NOTE WARNING ! it. Otherwise, water may enter the vehicle interior or the engine compartment. Fatigue is a result of physical or men- Drinking and driving and/or taking tal exertion that impairs judgment. drugs and driving are very dangerous If at all the situation demands that you Driver fatigue may be due to inade- combinations. Even a small amount of have to drive through water then; quate sleep, extended work hours, alcohol or drugs can affect your re- strenuous work or combination of flexes, perceptions and judgment.  Keep engine in higher RPM and crawl other factors. Take rest at regular in- The possibility of a serious or even fa- the vehicle in low gear. tervals. tal accident is greatly increased when  Flowing or rushing water creates you drink or take drugs and drive. strong forces. Driving through flowing water could cause the vehicle to be

12 SAFETY

carried away. Be very cautious about Night driving trying to drive through flowing water. NOTE  Ensure that all lights are working and  Lightly apply the brake pedal to dry the If you have driven for a long time in windshield, window glasses are clean. liners until the brakes work effectively heavy rain without braking, there  Select ‘Antiglare’ mode on IRVM. once you are out of water. may be a delayed response from the brakes when braking for the first  Drive more slowly at night than in the daytime, as the visual range is re- WARNING ! time. You have to depress the brake pedal more firmly and repeatedly. stricted at night. Maintain a speed Do not attempt to start the engine if Maintain a greater distance from the such that you can stop within illumi- vehicle gets flooded due to water. vehicle in front. nated distance of head lamps. Tow the vehicle to a safe place. Con-  Do not use the high beam unless inev- tact a nearest TATA MOTORS author- Driving through wet roads itable. It may dazzle the driver of the ised service center. On wet road or during light showers, “Aq- oncoming vehicle, thus causing an accident. Driving on a rainy day uaplaning” can occur. “Aquaplaning” is the loss of direct contact between the  Use head lamp main/dip beam to  Check wiper blades, lights and brakes road surface and the vehicle’s tyres due alert other road users on turns/ cross for proper functioning and condition. to formation of a water film between roads etc.  Check the tyre treads depth, the con- them. Steering or braking the vehicle can  Use side indicators well in advance for dition of the tread and tyre. be very difficult, and loss of control can lane change or turning.  Avoid harsh braking and sharp turns. occur.  Do not try to overtake other vehicles It may cause loss of control and lead at night. to a skid. NOTE  For slowing down, shift to lower gears and brake gently. There is no hard and fast rule about aquaplaning. The best advice is to slow  Keep lights ‘ON’ if visibility is poor. down when the road is wet.

13 SAFETY

Driving on gradients Driving on highway Occupant Safety When climbing gradient, the vehicle may Stopping distance progressively in- The restraint system can reduce the risk begin to slow down and show a lack of creases with vehicle speed. Maintain a of vehicle occupants coming into contact power. If this happens, shift to a lower sufficient distance between your vehicle with parts of the vehicle's interior in the gear and apply power smoothly so that and the vehicle ahead. event of an accident. The restraint system there is no loss of traction. can also reduce the forces to which vehi- For long distance driving, perform safety cle occupants are subjected during an ac- When driving down a hill, the engine brak- checks before starting a trip and take rest cident. ing should be used by shifting to a lower at certain intervals to prevent fatigue. gear. The restraint system comprises: Use ‘Cruise Control’ (if equipped) if road Do not drive in neutral gear or switch off and traffic conditions make it appropriate  Seat belt system the engine. to maintain a steady speed for a pro-  Air bags longed period. The components of the restraint system NOTE work in conjunction with each other. For more details refer ‘Hill Hold Control An air bag supplements a correctly worn (HHC) and ‘Hill Descent Control’ (HDC) seat belt. As an additional safety device, in ‘DRIVER ASSIST’ section. the air bag increases the level of protec-

tion for vehicle occupants in the event of an accident. WARNING !

On long and steep gradients, you must reduce the load on the brakes by shifting early to a lower gear. This allows you to take advantage of the engine braking effect and helps avoid overheating of brakes resulting in reduced braking efficiency.

14 SAFETY

Seat Belts The RPLL does not compensate an incor- WARNING ! rect seat position or the routing of an in- Seat belts are the most effective means correctly fastened seat belt. Modifications to the restraint system of restricting the movement of vehicle oc- may cause it to no longer work as in- cupants in the event of an accident or the tended. The restraint system may vehicle rolling over. This reduces the risk WARNING ! then not perform its intended protec- of vehicle occupants coming into contact If the seat belt is incorrectly fastened, tive function and may fail in an acci- with parts of the vehicle interior or being it cannot protect as intended. Fur- dent or trigger unexpectedly. ejected from the vehicle. Furthermore, thermore, an incorrectly fastened This poses an increased risk of injury the seat belt helps to keep the vehicle oc- seat belt can cause additional injury. or even fatal injury. cupant in the best position in relation to This poses an increased risk of injury Never modify parts of the restraint the air bag. or even fatal injury. system. Never tamper with the wiring, Make sure that all vehicle occupants the electronic components or their The seat belt system comprises: are seated properly with a correctly software.  Seat belts fastened seat belt.  Retractor Pre - Tensioner Load Limiter (RPLL) for the front seat belts If the seat belt is pulled out of the belt outlet quickly or with a jerky movement, the belt retractor locks. The belt strap cannot be extracted any further. The pre-tensioner tightens the seat belt in an accident, pulling the belt close against the body.

15 SAFETY

Seat belts may sustain non-visible  the seat belt is tight across your body. WARNING ! damage in an accident. Modified or Avoid wearing bulky clothing, e.g. a The seat belt does not offer the in- damaged seat belts may tear or fail, winter coat. tended level of protection if you have e.g. in an accident. Modified RPLL  the seat belt is not twisted. not moved the backrest to an almost could accidentally trigger or fail to de-  the shoulder section of the belt is al- upright position. When braking or in ploy when necessary. This poses an ways routed across the center of your the event of an accident, you could increased risk of injury or even fatal shoulder. The shoulder section of the slide underneath the seat belt and injury. belt must not come into contact with sustain abdomen or neck injuries. Never modify the seat belts, RPLL, your neck or be routed under your This poses an increased risk of injury belt anchorages or inertia reels. arm. Where possible, adjust the seat or even fatal injury. Make sure that the seat belts are un- belt to the appropriate height. damaged, not worn out and clean.  the lap belt passes tightly and as low Adjust the seat properly before begin- Following an accident, have the seat down as possible across your lap. ning your journey. Always ensure that belts checked immediately at a TATA The lap belt must always be routed the backrest is in an almost upright MOTORS Authorized Service Centre. across your hip joints and not across position and that the shoulder sec- your abdomen. This applies particu- tion of your seat belt is routed across Proper use of the seat belts larly to pregnant women. If necessary, the center of your shoulder. All vehicle occupants must be wearing the push the lap belt down to your hip joint

seat belt correctly before beginning the and pull it tight using the shoulder section of the belt. WARNING ! journey. Also make sure that all vehicle occupants are always wearing the seat  the seat belt is not routed across The seat belts may not perform their belt correctly while the vehicle is in mo- sharp, pointed or fragile objects. e.g. intended protective function if: tion. pens, keys or eyeglasses. Store these  they are damaged, modified, in a suitable place. When fastening the seat belt, always bleach or dyed  only one person is using a seat belt at make sure that:  the seat belt buckle is damaged a time.  the RPLL, belt anchorages or iner-  the seat belt tongue is only inserted to tia reels have been modified the belt buckle belonging to that seat.

16 SAFETY

 infants and children must never travel  Pull the belt tongue across your body  To unlatch the belt, press the red but- sitting on the lap of a vehicle occu- and insert it into the buckle until click ton on the buckle. Guide the belt to the pant. In the event of an accident, they sound is heard. pillar as it retracts. could be crushed between the vehicle  Check and ensure that the belt is not occupant and seat belt. twisted.  there are never objects between a per-  Position the lap portion of the belt as son and the seat, e.g. cushions. low as possible across your hip bone.  Pull up the shoulder part of the belt to Seat belts are only intended to secure and remove the slack. Make sure that the restrain vehicle individual occupants. belt goes over your collar bones and across chest. Seat belt adjustments  The lap portion of the belt should be worn across the pelvis, not across the waist.

Make sure that the seat belt is fully rolled up. Otherwise, the seat belt or belt tongue will be trapped in the door or in the seat mechanism. This could damage the door, the door trim panel and the seat belt. Damaged seat belts can no longer fulfill their protective function and must be replaced. Visit a TATA MOTORS Authorized Service Centre. 1. Buckle 2. Tongue 3. Press Button

17 SAFETY

Seat belt height adjustment Seat belt hanger (if equipped) WARNING ! Position the lap belt as low as possible on your hip bone and not across the abdomen. If the lap belt is positioned across your abdomen, it could cause serious injuries in a crash.

Pregnant woman Pregnant women should also always use a lap-shoulder belt. The lap belt portion should be positioned as low as possible on the hip bones to avoid any possible Adjust the height of seat belt shoulder pressure on the abdomen. When second or third row seat is not oc- section according to your comfort. cupied, hook the seat belts at its respective belt hanger to avoid rattling. Make Lap belt sure the belt webbing is not twisted. Pull the lap belt tongue and engage it into the belt buckle. Adjust the belt length. To lengthen the belt, hold the tongue at a right angle to the webbing and pull. To shorten, pull the loose end of the webbing. To unfasten, press the release button in the buckle.

18 SAFETY

Child Safety Child Restraint System (CRS) WARNING ! TATA MOTORS strongly recommends the Important safety notes If persons, particularly children are use of Child Restraint Systems (CRS) for Accident statistics show that children se- subjected to prolonged exposure to all children up to age of 12 years. cured in the rear seats are safer than chil- extreme heat or cold, there is a risk of dren secured in the front-passenger seat. injury, possibly even fatal. Never For this reason, TATA MOTORS strongly leave children unattended in the vehi- WARNING ! advises that you install a child restraint cle. If the child restraint system is in- system on a rear seat. Children are gener- stalled incorrectly or is not secured, it ally better protected there. can come loose in the event of an ac- WARNING ! cident, heavy braking or a sudden WARNING ! If the child restraint system is sub- change in direction. The child restraint system could be thrown about, If you leave children unsupervised in jected to direct sunlight, parts may striking vehicle occupants. There is the vehicle, they could set it in motion get very hot. Children may burn them- an increased risk of injury, possibly by, for example: selves on these parts, particularly on the metal parts of the child restraint even fatal.  release the parking brake. system. There is a risk of injury. Make sure that you observe the child  shift the automatic transmission restraint system manufacturer's in- out of the parking position P. If you leave the vehicle, taking the stallations and the notes on use.  start the engine. child with you, always ensure that the Please ensure, that the base of the In addition, they may operate vehi- child restraint system is not exposed child restraint system is always rest- cle equipment and become trapped. to direct sunlight. Protect it with a ing completely on the seat cushion. There is a risk of an accident and in- blanket, for example. If the child re- Never place objects, e.g. cushions, jury. straint system has been exposed to di- under or behind the child restraint rect sunlight, let it cool down before When leaving the vehicle, always take system. Only use child restraint sys- securing the child in it. Never leave tems with the original cover designed the Key with you and lock the vehicle. children unattended in the vehicle. Never leave children unsupervised in for them. Only replace damaged co- the vehicle. vers with genuine covers.

19 SAFETY

Selection and installation of CRS WARNING ! Always select the child restraint system Child restraint systems or their secur- (CRS) that complies with latest safety ing systems which have been dam- standards (AIS072/ECE R44). They are aged or subjected to a load in an ac- classified according to the child's size, cident can no longer protect as in- height and weight. Select the appropriate tended. The child cannot then be restrained in the event of an accident, CRS for your child. Ensure that the child heavy braking or sudden changes of fits properly in the CRS and CRS is se- direction. There is an increased risk curely installed in the vehicle. Make sure of injury, possibly even fatal. that you observe the child restraint sys- Replace child restraint systems which tem manufacturer’s manual in detail for have been damaged or subjected to a installation procedure. load in an accident as soon as possible.

20 SAFETY

Recommended CRS position The suitability of seat position for carriage of children and recommended category of child restraint system is shown in the table below.

Group Mass Group Age Group Front 2nd Row 2nd Row 2nd Row 3rd Row 3rd Row Passen- Outboard Outboard Center Outboard Outboard ger LH RH LH RH 0 Up to 10 kg Up to 9 months X X U X X X 0+ Up to 13 kg Up to 24 months X X U X X X I 9 to 18 kg 9 months to 48 months X X U X UF UF II 15 to 25 kg Approx. 3 to 7 years X X U X UF UF III 22 to 36 kg Approx. 6 to 12 years X X U X UF UF

X - Seat Position not suitable for children in this age group. U - Suitable for ‘Universal*’ category restraints approved for use in this age group. UF - Suitable for forward facing ‘universal*’ category restraints approved for use in this age group.

*Universal is a category in the AIS072 / ECE R44 norm.

21 SAFETY

Check list Child Lock NOTE 1. Never carry children on somebody’s Accident statistics show that children lap when vehicle is in motion. WARNING ! secured in the rear seats are safer 2. Always secure children in the vehicle than children secured in the front-pas- If children are traveling in the vehicle, in a CRS. The CRS must be suitable for they could: senger seat. For this reason, TATA MO- the child’s height, weight and build. TORS strongly advises that you install  open doors, thus endangering 3. Observe the instructions from the other people or road users the child restraint system on a rear manufacturer of the CRS and always  exit the vehicle and be caught by seat. keep the instruction manual in the ve- oncoming traffic hicle. When installing child restraint system operate vehicle equipment and Always make sure that the seat belt  in rear seat, push the front seat fully 4. become trapped forward so that child’s feet do not routing is correct for children and they touch the front seat back. are sitting in the correct position. There is a risk of an accident and in- 5. Do not leave any toys or other objects jury. loose in the CRS or on the seat while Storage for CRS the vehicle is in motion. Always activate the child-proof locks Secure child restraint system safely in the provided on rear door and window in- vehicle or stow it in the luggage compart- hibit switch if children are traveling in WARNING ment if not being used. ! the vehicle. When leaving the vehicle, Each CRS should be used for one always take the key with you and lock While the vehicle is in motion an unre- child only. the vehicle. Never leave children un- strained child restraint system could flung attended in the vehicle. through the vehicle interior in the event of a sudden braking, maneuver or an accident. This could cause injuries to the travelling occupants.

22 SAFETY

You secure each door individually with the Window Inhibit Switch key with you and lock the vehicle. child lock on the rear doors. A door se- Never leave children unsupervised in cured with a child lock cannot be opened Press and activate the inhibit switch, so the vehicle. from inside the vehicle. When the vehicle individual window winding switches pro- is unlocked, the door can be opened from vided on rear doors cannot be operated. Pets in the vehicle the outside. Refer “Opening and Closing” section for more details. WARNING ! If you leave animals unattended or unsecured in the vehicle, they could press buttons or switches. As a result, they could:  activate vehicle equipment and become trapped.  activate or deactivate systems, thereby endangering other road users Unsecured animals could also be flung around the vehicle in the event  To activate: press the child lock lever down in the direction of arrow. of an accident or sudden steering or braking, thereby injuring vehicle occu-  Make sure that the child lock is work- WARNING ! ing properly. If children operate the windows they pants. There is a risk of an accident and injury.  To deactivate: pull the child lock lever could be get trapped, particularly if up in the direction of arrow. they are left unsupervised. There is a Never leave animals unattended in risk of injury. the vehicle. Always secure animals Activate the window inhibit feature properly during the journey, e.g. use a when children are travelling. When suitable animal transport box. leaving the vehicle, always take the 23 SAFETY

Air Bags - Supplemental Restraint Important safety notes  Move the driver's and front-passenger System seats as far back as possible. The driv- WARNING ! er's seat position must allow the vehi- The installation point of an air bag can be cle to be driven safely. recognized by the AIR BAG symbol. If you do not sit in the correct seat po-  Only hold the steering wheel on the sition, the air bag cannot protect as An air bag complements the correctly fas- outside. This allows the air bag to be intended and could even cause addi- tened seat belt. It is no substitute for the fully deployed. tional injury when deployed. This seat belt. The air bag provides additional  Always lean against the backrest while poses an increased risk of injury or protection in applicable accident situa- driving. Do not lean forwards or lean even fatal injury. tions. against the door or side window. You To avoid hazardous situations, always may otherwise be in the deployment Not all air bags are deployed in an acci- make sure that all of the vehicle's oc- area of the air bags. dent. The different air bag systems func- cupants:  Always keep your feet in the footwell tion independently from one another in front of the seat. Do not put your  have fastened their seat belts cor- feet on the dashboard, for example. rectly, including pregnant women Your feet may otherwise be in the de-  are sitting correctly and maintain ployment area of the air bag. the greatest possible distance to

the air bags  are placed no objects between the air bag and the vehicle's occupants.

 Adjust the seats properly before beginning your journey. Always make sure that the seat is in an almost upright position.

24 SAFETY

Before starting your journey and to avoid Front Air bags risks resulting from the speed of the air bag as it deploys, make sure that:  there are no people, animals or objects between the vehicle occupants and an air bag.  there are no objects between the seat, door and B-pillar.  no hard objects, e.g. coat hangers, hang on the grab handles or coat hooks.  no accessories, such as cup holders, are attached to the vehicle within the deployment area of an air bag, e.g. to doors, side windows, rear side trim or Driver's air bag (DAB) deploys in front of side walls. the steering wheel. Front-passenger air bag (PAB) deploys in front of and above  no heavy, sharp-edged or fragile objects are in the pockets of your cloth- the glove box. ing. Store such objects in a suitable When deployed, the front air bags offer place. additional head and thorax protection for the occupants in the front seats.

25 SAFETY

Side Air bags (if equipped) Front side impact air bags deploy next to the outer bolster of the seat backrest. WARNING ! When deployed, the side impact air bag Unsuitable seat covers could restrict offers additional protection. or even prevent the deployment of However, it does not protect the: the air bags integrated into the seats.  head Consequently, the air bags cannot neck protect vehicle occupants as they are  designed to do. This poses an in-  arms creased risk of injury or even fatal in- In the event of a side impact, the side im- jury. pact air bag is deployed on the side on You should only use seat covers that which the impact occurs. have been approved for the respective seat by TATA MOTORS.

26 SAFETY

Curtain air bags (if equipped) Airbag warning label (if equipped) NOTE If the Air bag warning tell-tale on the instrument cluster stays ON while driving, there may be a problem with the Air bag system. Contact TATA MOTORS Authorised Service Centre. In case of any frontal damage to your vehicle or any maintenance required to be performed should be done by TATA MOTORS Authorised Service Centre only.

Curtain air bags are integrated into the Airbag warning information is provided on Do not permit anyone else to do any side of the roof frame and deployed in the the front passenger’s sun visors. service, inspection, maintenance or area from the 1st row seat to the 2nd row repair on any SRS components or wir- seat. ing. When deployed, the curtain air bag en- Improper work on the SRS system will hances the level of protection for the result in inadvertent deployment of head. the air bag or malfunctioning.

However, it does not protect the chest or arms.

In the event of a side impact, the curtain air bag is deployed on the side on which the impact occurs.

27 SAFETY

ABS (Anti-lock Braking System) WARNING ! WARNING ! If ABS is faulty, the wheels could lock The stopping distance required for ve- when braking. The steerability and hicles with ABS may be slightly more braking characteristics may be se- than conventional brake system but verely impaired. There is an in- ABS will still offer the advantage of creased danger of skidding and acci- helping you maintain directional con- dents. trol. Drive on carefully. Have ABS checked However, remember that ABS will not immediately at a TATA MOTORS Au- compensate for bad road or weather thorized Service Centre as soon as conditions or poor driver judgment. possible. Drive within safety margins, taking into consideration prevailing weather When Braking: ABS regulates brake pressure in such a and traffic conditions.  If ABS intervenes: continue to de- way that the wheels do not lock when you press the brake pedal vigorously until brake. the braking situation is over. This allows you to continue steering the  To make a full brake application: vehicle when braking. depress the brake pedal with full force. The ABS warning lamp in the instrument cluster lights up when the ig- If ABS intervenes when braking, you will nition is switched on. It goes out when the feel a pulsing in the brake pedal. The pul- engine is running. sating brake pedal can be an indication of hazardous road conditions, and functions as a reminder to take extra care while driving.

28 SAFETY

EBD (Electronic Brake-force Distri- E-Key Loss of keys bution) An E-Key is an electronic access and au- If one of the keys is lost, contact your EBD monitors and controls the brake thorization system which is provided as a nearest TATA MOTORS authorised dealer pressure on the rear wheels to improve standard feature on your vehicle. immediately. driving stability while braking. Unlocking principle EBD provides optimal braking pressure WARNING ! The transponder which is built into the ig- distribution between front and rear axle to  Do not turn ‘ON’ ignition switch by nition E-Key carries a unique identifica- optimize braking distance and to ensure using E-key with any type of metal tion code. The vehicle unlocks when the vehicle stability by means of lowering wound around its grip or in contact code on the E-Key matches with the code braking pressure increase at rear axle. with it. This may be detected as ab- on the Engine Management System normal condition by immobilizer (EMS). WARNING ! and prevent engine from starting. Engine starting  Do not leave the E-key in areas of If EBD is malfunctioning, the high temperature. The transponder When the key is inserted and the ignition rear wheels can lock, e.g. under full in it will behave abnormally when is switched ‘ON’, all codes are communi- braking. This increases the risk of reused. skidding and an accident. cated within concerned components (E- Key, Immobilizer and EMS). The engine  Do not try to start the vehicle when You should therefore adapt your driv- will start only if all the codes match. the Immobilizer indicator lamp on ing style to the different handling the instrument cluster is glowing. In characteristics. Have the brake sys- this condition the vehicle will not tem checked immediately at a TATA NOTE start and the vehicle’s battery will MOTORS Authorized Service Centre as Key can be removed from the ignition also be drained due to frequent soon as possible. switch only when the vehicle is in Park cranking. (P) mode (applicable for AT variants).

29 SAFETY

Immobilizer - Anti-Theft Device Immobilizer system is designed to prevent Immobilizer vehicle theft by electronically disabling Vehicle Vehicle State Meaning / Function of the state the engine ignition system. The engine Condition Lamp Status can be started only with vehicle’s original Immobilizer ignition key which has an Ignition OFF Blinking Locked Vehicle Immobilized and electronic identification programmed awaiting electronic key code. Ignition ON OFF Unlocked Normal condition and ready to NOTE start the vehicle Use only E-key, the other should be Ignition ON ON Locked - Problem with key (Wrong kept in a safe location. Note down ‘key key used to start vehicle) Tag no.’ information (and keep it safe) - Problem with Immobilizer which is required while getting system. Contact a TATA MO- new/spare keys. TORS authorized service Remember that it is not possible to centre prepare new/spare keys without the “key Tag number.” Take precaution Ignition ON Blinking Unlocked Contact a TATA MOTORS au- about E-key, as without E-key vehicle thorized service centre immediately cannot be started.

OPENING AND CLOSING

Key Approach light Folding key blade in / out Press approach light button (2) once, low Press button (4) to flip out the key blade. beam, park and roof lamp will turn ‘ON’ For folding, press the button (4) and fold for approx. 60 seconds. This feature helps the key blade inside. to find and reach the vehicle or reach home in dark and cloudy condition. To switch ‘OFF’ the approach lights, press and release the same button or it automatically turns ‘OFF’ after 60 seconds approx. Approach light ON time can be adjusted using settings provided in Infotainment system. 1. Unlock 2. Approach Light 3. Lock 4. Key blade in/out button Locking all doors To lock all doors, press Lock button (3) Unlocking with music system once. Locking will be confirmed by two Pressing unlock button (1) will unlock the flashes of turn indicators. NOTE doors and fuel flap. Using settings provided in Infotainment system, single If lock button is pressed with the driver Key Blade should not be folded with- stage (All doors unlock) and dual stage door open, locking-unlocking takes place out pressing the button. Also, it (driver door at first press and remaining with audible warning sound. While if any should not be forced in any direction door at second press) unlocking can be other door is open, the vehicle gets locked apart from folding direction to avoid done. but indicators do not flash. damage to Flip Mechanism. Always keep the key blade in folded condi- Unlocking without music system tion when not in use. Pressing button (1) once will unlock the For AT variants, In certain conditions driver door and pressing twice will unlock key blade surface temperature will all remaining door. be higher which is normal.

32 OPENING AND CLOSING

Remote key features other key, theft detection alarm gets acti- Force panic alarm vated. Press either the ‘Lock’ or ‘Unlock’ Vehicle search Press the ‘Lock’ and ‘Unlock’ button sim- button to deactivate the alarm. In vehicle lock condition if lock button on ultaneously to activate panic alarm. Press remote key is pressed the turn indicators Auto locking / unlocking of doors / either the ‘Lock’ or ‘Unlock’ button to de- of vehicle flashes 4 times. auto relock activate panic alarm. Vehicle doors get automatically locked Sleep Mode NOTE when all doors are closed and the vehicle If remote key is not used for more than a speed crosses approx. 10 kmph. For AT variants, key can be removed week then its functionalities will turn to from the ignition switch only when the When ignition key is taken out all the sleep mode. In such a case, to activate vehicle is in Park (P) mode. doors get automatically unlocked. the remote key functionalities, open the door mechanically with the key blade Key rotation from Ignition ON to key Also, when unlocked with remote key and once. LOCK position to be done slowly to if no door is opened within approx. 30 sec- avoid obstruction feel. onds, vehicle doors get automatically If any difficulty in removal in Park (P) locked. mode, Contact nearest TATA MO- TORS authorized service centre. Anti-grab / anti-scan coding The remote control set of this security sys- Automatic activation of immobilizer tem is protected against the use of de- When key is removed from ignition switch, vices called ‘scanners’ and ‘grabbers’ the engine will be immobilized automati- which can record and reproduce some cally even if you forget to lock the vehicle. types of remote codes.

Theft detection When the vehicle is locked with the remote key and if any of the door or ignition switch is tried to be accessed with any 33 OPENING AND CLOSING

Do’s and Don’ts for using remote key

DO’S DONT’S Don’t play with Lock/Unlock push-button of remote while in the 1 Do always keep your vehicle’s battery properly charged. vicinity of your vehicle, as it could lead to an unintentional unlocking your vehicle. Do always press the Lock push-button of the remote Don’t lock the vehicle by remote while sitting inside the vehicle. 2 only after coming out from the vehicle. Don’t use discharged batteries in remote, as it could damage Do keep the remote in safe and secure place. 3 the remote. In case of any problem, always contact TATA MOTORS Don’t remove the battery connection of the vehicle while the ve- 4 authorized service outlet. hicle has been locked by remote. First unlock the vehicle by remote, and then remove the battery connection.

34 OPENING AND CLOSING

Important Doors Don’t operate Unlock button of remote Doors can be unlocked/locked using one key while in the vicinity of your vehicle, as of the following options it could lead to an unintentional unlocking your vehicle.  By remote key  By taking out key from IGN lock If red LED remote flashes for 5 times after  By pressing lock/unlock switch on fas- pressing any button on remote key, it indi- cia switch bank cates that key battery is discharged. It is  By pulling popup knob on driver door recommended to replace battery at a TATA MOTORS Authorized Service Centre. Doors can also be locked/unlocked using mechanical key. Don’t use discharged batteries in remote, as it could damage the remote. Door locking / unlocking with me- All doors can be locked / unlocked manu- chanical key ally from outside using driver door key Refer ‘Maintenance’ section for battery slot. Insert the mechanical key and turn it Both front doors (driver and front replacement. clockwise to lock and counter clockwise passenger has separate locking facility. to open the doors. Don’t remove the battery connection of Both doors can be locked or unclocked the vehicle while the vehicle has been from outside using the mechnical key. locked by remote.

35 OPENING AND CLOSING

Locking without a key from inside Windows NOTE Power windows Single pull over-ride function is provided for driver door. In panic situation you can directly open driver door operating door lever. No need to operate pop-up knob.

Door Lock/Unlock switch

All the doors can also be locked from inside by pressing knob (1) on driver door 1. Front Window Winding Switch (Right) and independently on other respective 2. Front Window Winding Switch (Left) doors. 3. Rear Window Winding Switch (Right) Opening the doors from inside 4. Rear Window Winding Switch (Left) 5. Window Inhibit Switch All doors can be opened from inside. To open, pull the door opening knob (1) and All doors can be locked and unlocked by Glasses on all four windows of your vehi- then lever (2). the lock/unlock switch provided on the cle can be operated by switches provided fascia switch bank. on the driver door. They work when the WARNING ! key is in the ‘IGN ON’ position.

Do not operate knob of driver door when door is open.

36 OPENING AND CLOSING

Individual switches Window Inhibit Switch NOTE Individual window winding switches have Power windows can also be operated been provided on the front passenger and for approx. 3 minutes in ‘IGN OFF’ po- rear doors. sition or after key is removed. Do not use sun blinds when rear win- Glasses are wound up by pulling the dow glasses are open. switch and are lowered by pressing.

Express down (if equipped) Window glasses can be opened by a single press of the switch. The downward movement of window glass can be stopped by pulling the switch to UP position when moving downwards. Inhibit OFF (Released position) Long press will activate the express down function. When switch is released, the individual Option 1 : Provided on all doors (for XT) switches provided on Option 2: Provided on driver door (for rear passenger door other variants) can be operated. It can also be operated from the switches WARNING ! While closing the window glass, body on driver's arm rest. parts become trapped between the window glass and the door frame as the window glass moves. There is a risk of injury.

37 OPENING AND CLOSING

Inhibit ON (pressed position) Bonnet  Pull the engine bonnet release lever. The bonnet will pop up slightly. When this switch is pressed the individual WARNING ! switches provided on Always switch off the windshield wip- rear passenger doors ers and the ignition before opening cannot be operated. It the bonnet.

can only be operated by using the window switches on driver's arm rest. WARNING ! Certain components in the engine compartment, such as the engine, ra- WARNING ! diator and parts of the exhaust system, can become very hot. Working in If children operate the windows they the engine compartment poses a risk could be get trapped, particularly if of injury. they are left unsupervised. There is a risk of injury. Opening Activate the window inhibit feature  Make sure that the vehicle is in neu- when children are travelling. When tral gear with the parking brake ap- leaving the vehicle, always take the plied. key with you and lock the vehicle. Never leave children unsupervised in NOTE the vehicle. Make sure that the wiper arms are not raised before you lift up the bonnet to avoid damaging the wiper arms and the bonnet.

38 OPENING AND CLOSING

 Raise the bonnet slightly and lift the Tail Gate Closing secondary lock lever located under the bonnet center with your fingers. Pull the tailgate down using handle. Allow the tailgate to drop into the lock.  Lever is located slightly on right side from center of bonnet. For locking the tail gate, press the ‘Lock’  Lift the bonnet up slowly. Hydraulic button on the remote key. balancers hold the bonnet.

Closing WARNING !  To close the bonnet, hold the bonnet Always make sure that the tail gate is and pull it down slowly. closed and latched securely.  Lower the bonnet and let it fall from short height.  Check that the bonnet latch has en- Opening gaged properly. If the bonnet can be raised slightly, it is not properly en- To open the tail gate, press the ‘Unlock’ button on the remote key. Once the vehi- gaged. Do not press the closed bon- cle is unlocked, pull the door handle (1) net. Open the bonnet again and close on the tail gate. it with a little more force. A separate lock (2) is also provided on the tailgate. It can be opened by using me- WARNING ! chanical key. Make sure that the bonnet is properly latched before driving. It may open up when the vehicle is in motion and block your view. In this situation there is a risk of an accident.

39 OPENING AND CLOSING

Fuel Lid NOTE NOTE Remove the fuel filler cap slowly, and If fuel cap needs replacement, en- wait for any hissing to stop. The fuel sure that it is replaced by a genuine may be under pressure and may cap at TATA MOTORS authorized ser- spray out. vice centre only.

Closing Manual Fuel flap opening Gently push to lock the fuel flap back to its position. It gets locked once the vehicle is locked using the central locking.

WARNING ! Opening Fuel vapour is extremely hazardous. Always switch off the engine before Fuel Lid can be unlocked using one of the refueling and never refill near sparks following options. or open flames. Do not use cell phone  By remote key while refueling.  By taking out key from IGN lock Do not continue adding fuel after the automatic shut off function is oper-  By pressing lock/unlock switch on fas- Alternatively, you can also open the fuel cia switch bank ated, if equipped in fuel filling nozzle at the fuel station. Overfilling the fuel flap manually by following the below  By pulling popup knob on driver door tank could damage the fuel system. steps:

Unlock your vehicle and open the flap by  Open the Tail Gate gently pressing it. Turn the fuel filler cap  Open the Trim Cover fitted to the left

counter clockwise and remove it. hand side.  You will find a cable with a knob.

40 OPENING AND CLOSING

 Slightly pull this knob to open the fuel flap.

NOTE The fuel flap opening cable should be used only in case of emergency/failure of central locking system/electrical system.

41 OPENING AND CLOSING

DASHBOARD & FEATURES

DASHBOARD AND FEATURES

Cockpit 1 Side Air bags - if equipped 2 A.C. Air vent (Side) 3 Air Bag (PAB) - if equipped 4 A.C. Air vent (Middle) 5 Hazard Warning Switch 6 Combi-Switch 7 Steering Wheel 8 Instrument Cluster 9 Horn Pad 10 Air Bag (DAB) 11 Master Light Switch 12 Steering Wheel Switches – (if equipped) 13 Accelerator Pedal 14 Brake Pedal 15 Clutch Pedal – (Not in AT) 16 Foot Rest 17 USB/AUX Port 18 Drive Control Switch- if equipped 19 Arm Rest 20 Parking Brake Lever 21 Gear Shift Lever 22 Power Socket 23 Heating/Ventilation/AC Control panel 24 Fascia Switches 25 Infotainment System- if equipped 26 Glove Box

44 DASHBOARD AND FEATURES

Instrument Cluster Tachometer Fuel Gauge Driver Information Screen Speedometer

Temperature Gauge Drive Modes

Tell tales & warning indicators

NOTE: All indicators shown may not be applicable to your vehicle. 45 DASHBOARD AND FEATURES

Welcome Strategy Tachometer Odometer At every key IN and ignition ON, the instrument cluster needles and gauges moves to MAX. and returns to '0' position. This is a welcome strategy. Speedometer

Odometer indicates total distance trav- Tachometer indicates engine speed in eled by vehicle up to 999999 km with revolutions per min (rpm). the resolution of 1 km. The Odometer reading freezes when WARNING !s reach to maximum value.

When engine is accelerated beyond! Speedometer indicates the actual vehi- safe ‘rpm’, the tachometer pointer cle speed in km/h. turns RED. In such case, reduce thef engine RPM immediately. s NOTE Never drive the vehicle beyond safea In vehicle running condition if the ‘rpm’. This may cause severe enginef speedometer is not showing the ve- damage. ! hicle speed, take your vehicle to TA- TA authorized service center

46 DASHBOARD AND FEATURES

Fuel Gauge WARNING !s

Do not continue adding fuel after the! automatic shut OFF function (provided on fuel filling nozzle, f if equipped) is operated. s Driving the fuel tank too low or emp-a f ty can cause the engine to stall and could endanger the passengers. Us-! er must stop and obtain the additional fuel as soon as possible once

low fuel warning comes ON or RED Very Low Low Half bar ON in the Fuel gauge. When the ignition switch is in ‘ON’ position, fuel gauge gives an approximate indica- Low fuel warning symbol will blink if tion of the amount of fuel in the fuel tank. ‘F’ stands for full and ‘E’ stands for empty. there is any fault in the system. Take Fuel gauge graphics color change from green to amber and then red, as the fuel your vehicle to the nearest TATA quantity in fuel tank reduces. MOTORS Authorized service station Fuel gauge change to red and low fuel warning lamp turns on when fuel in the if the symbol starts blinking. tank is near to empty position. This is a low fuel warning, refill immediately.

NOTE Keep the ignition switch in ON position and check the fuel level when the vehicle is stationary and preferably on level road. On inclines, curves, during braking and sudden acceleration due to the movement of fuel in the tank, the fuel level display may fluctuate or the low fuel warning lamp may illuminate earlier than usual.

47 DASHBOARD AND FEATURES

Temperature Gauge NOTE RED color of temperature gauge along with warning lamp indicates high coolant temperature warning lamp . This indicates overheating that may damage the engine. Stop the engine, let the temperature of engine reduce and then take your

vehicle to the nearest TATA MOTORS authorized service centre.

Normal Above normal High The gauge indicates the temperature level of the engine coolant after ignition switch WARNING !s is in ON position Never remove the radiator pressure! It indicates the coolant temperature in the form of a digital bar graph. Blue indicates cap from the radiator when the en- normal temperature and red indicates high temperature. Temperature gauge graphics gine is hot. Do not restart the enginef color changes from blue to red as the engine coolant temperature reaches to high until the problem has been duly s at- temperature. When temperature is higher, engine coolant temperature warning lamp tended. a will turn red with a buzzer. f

48 DASHBOARD AND FEATURES

Driver Information Screen

Display Message Description Action by the User

All Door Open

This warning shall be minimised in the display if still the door is opened after 5 sec and user can acknowledge the warning through Only Tailgate is open by pressing the Trip switch. Note: In Engine or Vehicle running condition the warning shall be displayed in minimised screen

All doors closed This feature monitors the doors status to warn the driver if any door open (including driver door and tailgate) is detected. 49 DASHBOARD AND FEATURES

Display Message Description Action by the User

This message displayed when User has to take the vehicle to Authorized Tata motors service transmission oil temperature station. is higher than allowable limit.

This message displayed when User has to take the vehicle to Authorized Tata motors service transmission related failure is station. present.

This message displayed when User has to take the vehicle to Authorized Tata motors service transmis sion related failure is station. present.

This message displayed when User has to drive the vehicle in recommended speed to change gear shift is denied in manual the gear. mode.

Torque On Demand (TOD) User has to take the vehicle to Authorized Tata motors service System Fault station.

Electronic Brake Distribution User has to take the vehicle to Authorized Tata motors service (EBD) System Fault station.

50 DASHBOARD AND FEATURES

Display Message Description Action by the User

Electronic Stability Program User has to take the vehicle to Authorized Tata motors service (ESP) System Fault station

This message comes ON User has to fasten the seat belt when seat belt is not fastened.

This message comes ON User has to take the vehicle to Authorized Tata motors service when brake fluid level is low. station

This message comes ON User has to dis engage the Park brake before start moving the when park brake is engaged vehicle

Traction Control System Fault User has to take the vehicle to Authorized Tata motors service station

This message comes ON User has to drive the vehicle carefully when Ice is possible on road due to low outside air temperature

51 DASHBOARD AND FEATURES

Display Message Description Action by the User This message comes ON User has to fill the water in the fluid tank when washer fluid level is low and it shall be displayed only in Ignition OFF- ON condition not in vehicle running condition (If applicable).

Hill Hold Control (HHC) Sys- User has to take the vehicle to Authorized Tata motors service sta- tem Failure tion

Hill Descent Control (HDC) Information System Active

Hill Descent Control (HDC) User has to take the vehicle to Authorized Tata motors service sta- System Fault tion

HDC System Deactivation Information

52 DASHBOARD AND FEATURES

Display Message Description Action by the User

This feature monitors the User has to take the vehicle to Authorized Tata motors service sta- parking lamp and warns the tion driver when lamp is malfunctioning

This feature monitors the User has to take the vehicle to Authorized Tata motors service sta- brake lamp and warns the tion driver when lamp is malfunctioning

This feature monitors reverse Lamp state and warns the User has to take the vehicle to Authorized Tata motors service sta- driver when lamp is malfunction tioning

This feature monitors the Low User has to take the vehicle to Authorized Tata motors service sta- beam lamp state and warns the driver when lamp is mal- tion functioning This feature indicates the status of Auto light on IC Information

53 DASHBOARD AND FEATURES

Display Message Description Action by the User This warning shall come when already there is an drive User has to wait till the earlier mode transaction to be complete. mode change in Progress

This warning shall come when there is a drive mode switch User has to take the vehicle to Authorized Tata motors service sta- failure. tion

HDC System Set Speed Information

This screen comes when more than one warnings are Information true simultaneously.

54 DASHBOARD AND FEATURES

Driver Information System Image Description

Service Reminder There are two types of service reminder i) By days ii) By Kms  By Kms The service reminder shall come at every 10000 kms and it shall be pop up before 500kms of due (i.e. 10000-500=9500km) and it shall be subtracted from the distance travelled.

 By Days The service reminder shall come at every 180days and it shall be pop up before 30 days of due time(i.e. 180-30=150 days) and it shall be subtracted from the days crossed.

 By Kms overdue The service reminder overdue shall come if the due km is crossed and it shall be displayed in every IGN ON and it shall be minimised in the TFT (i.e. 10000-10050=50km)

 By days overdue The service reminder overdue shall come if the due days is crossed and it shall be displayed in every IGN ON and it shall be minimised in the TFT (i.e. 180-260=80 days).

55 DASHBOARD AND FEATURES

Driver Information System Image Description Service Reminder Resetting User can reset service reminder by using the following steps Step 1: By changing the DIC switch to select the SET screen

Step 2: Short press the toggling switch to select the “Service Re- minder Reset” and long press the toggling switch for more than 3 sec then the service reminder shall be reset and it shall not be displayed in the next Ignition cycle.

Step 3: Select the back button by short pressing the toggling switch to go back to previous menu or don’t change/move the DIC switch for 10 sec to go back to previous screen.

Note: Take it to the authorized TATA service station between the regular intervals of service reminder notification Days/Km in the screen and do not reset the service reminder before the service, and it shall be reset by the Authorized person during the service.

56 DASHBOARD AND FEATURES

Driver Information System Image Description

Distance to empty (DTE) It indicates approximate distance in ‘km’ that your vehicle can travel with available fuel in tank and the driving pattern. DTE values may vary significantly based on driving conditions, driving habits and condition of the vehicle. It is an estimate value of the available driving distance.

MT AT ‘Refuel’ shall be displayed which indicates that it’s the time to take your vehicle to the nearest filling station to fill the fuel. If low fuel warning light turns ‘ON’, fill the fuel tank immediately regardless the value of displayed DTE.

If DTE is displayed as ‘---‘, take your ve- NOTE: Refuel hicle to TATA MOTORS authorized service centre.

DASHBOARD AND FEATURES

Driver Information System Image Description TRIP A Average fuel economy Instrument Cluster displays ‘Average Fuel (AFE) Economy A’ and ‘Average Fuel Economy B’ corresponding to ‘TRIP A’ and ‘TRIP B’ respectively. Average Fuel Economy ‘A’ and ‘B’ will reset to ‘0’ when Trip A and Trip B is reset respectively. It will be displayed as ‘--.--‘ for initial 0.5 km of MT AT respective trip. Once 0.5 km distance is cov- TRIP B ered, Average Fuel Economy will be displayed. NOTE: AFE value is estimate of fuel economy. It may vary significantly based upon driving conditions, driving habits and condition of vehicle.

MT AT

58 DASHBOARD AND FEATURES

Driver Information System Image Description

Instantaneous fuel economy It indicates fuel economy of current or instant (IFE) fuel mileage of the vehicle when ignition is turned ‘ON’ and vehicle is on running condition. The indication on the display may be delayed if fuel consumption is affected by driving pattern.

NOTE: IFE will vary frequently as per driving MT AT pattern.

Clock Clock Indicates current time in 12/24 hrs. mode. Clock time can be changed using setting menu when combi-switch is in ‘SET’ mode and by long and short pressing the TRIP switch.

Whenever the battery terminals or related fuses are connected you must reset the clock time. This feature is available when ignition switch is in ‘ON’ position. NOTE: Clock settings can also be changed through infotainment system. For more information refer infotainment manual.

59 DASHBOARD AND FEATURES

Driver Information System Image Description Clock Setting You can set clock for 24/12 hrs mode along with hours and minutes values with this menu

Follow below procedure for clock setting Step 1: Long press the toggling switch to select the 12/24 hrs mode. Step 2: If you want to change to 12 hrs mode then long press the toggling switch to set the clock. Step 3: The digit has been highlighted in RED colour can be changed by short pressing the toggling switch. Step 4: You can move to the next digit by long pressing the toggling switch. Step 5: Once the time has been set then select the back button to go back to the previous screen by long pressing the toggling switch or No change in the

DIC switch for 10 sec shall take to previous screen.

60 DASHBOARD AND FEATURES

Driver Information System Image Description

Outside ambient tempera- Outside This displays outside ambient temperature. ture Ambient Temperature The outside ambient temperature value may not be accurate when driving vehicle at low speed (less than 30kmph) or when stopped. If outside temperature falls below -1°C “snow- flake symbol along with Ice Possible” warning appears in addition to the outside temperature display on the screen. The warning flashes for approximately 3 seconds.

NOTE: If display shows ‘- - ‘, Contact nearest TATA MOTORS authorized service centre.

61 DASHBOARD AND FEATURES

TRIP, FUEL, SET Modes Display selection in ‘TRIP’ Mode Sr. Indication on Display ‘Selector switch’ ‘Selector switch’ No. (Short press) (Long press) 1 Main Odometer Display changes to Trip me- - ter ‘A’ 2 Trip meter ‘A’ Display changes to Trip me- Resets Trip meter ‘A’ ter ‘B’ value 3 Trip meter ‘B’ Display changes to Main Resets Trip meter ‘B’ Odometer value.

Display selection in ‘FUEL’ Mode Sr. No. Indication on Display ‘Selector switch’ (Short press) ‘Selector switch’ (Long press) 1 Instant Fuel Economy Display changes to Average Fuel Economy ‘A’ No change 2 Average Fuel Economy ‘A’ Display changes to Average Fuel Economy ‘B’ - 3 Average Fuel Economy ‘B’ Screen will go to DTE - 4 Distance To Empty ----- No change Display selection in ‘SET’ Mode 1 Clock Display changes to Service Reset Mode Enters into 24/12 hrs selection (if service reminder appears) 2 Service Reminder Reset Display changes to clock setting Enters into Service Reminder Re- set mode

62 DASHBOARD AND FEATURES

Instrument Cluster (for selected variants only)

Tachometer Tell tales & Warning indicators Speedometer

Temperature Gauge Driver Information Centre Fuel Gauge

NOTE: All indicators shown may not be applicable to your vehicle. 63 DASHBOARD AND FEATURES

Instrument Cluster Instrument Cluster displays ‘Average Fuel Economy A’ and ‘Average Fuel Economy B’ corresponding to ‘TRIP A’ and The Instrument cluster consists of Speedometer, Tachometer, Temperature gauge, Fuel gauge, and Warning lamps. ‘TRIP B’ respectively. Average Fuel Economy ‘A’ and ‘B’ will reset to ‘0’ when Trip A and Trip B is reset respectively. The instrument cluster also houses the Driver Information Cen-  Range (Distance to Empty) tre. It consists of: It indicates approximate distance in ‘km’ that your vehicle 1) Main Odometer can travel with available fuel in tank.  Odometer indicates total distance traveled by vehicle 6) Outside Ambient Temperature up to 999999 km with the resolution of 1 km. This displays outside ambient temperature in units of °C  The Odometer reading freezes when reach to maximum value with the resolution of 1 °C. 2) Speedometer  Speedometer indicates the actual vehicle speed in km/h. Driver Information Centre 3) Tachometer  Tachometer indicates engine speed in revolutions per Sr. Parameter Characteristics min (rpm). No. 4) Trip meter (A and B) 1 Multifunctional Colour: Blue text with black 5) Fuel Computer. Display background It displays: 2 Main Odometer Range: 0 to 999999  Instantaneous Fuel consumption Resolution: 1 km It indicates fuel economy of current Drive when Ignition is The Odometer reading does turned ‘ON’. not over flow to ‘0.0’ when The display does not show actual value unless vehicle is maximum value is reached, the display will freeze to moving. maximum value.  Average Fuel Consumption 64 DASHBOARD AND FEATURES

Sr. Parameter Characteristics Sr. Parameter Characteristics No. No. Average Fuel Con- When Trip meter ‘A’ or ‘B’ 3a Trip Meter (A&B) Range: 0.0 to 9999.9 5b sumption reset is reset, the Average Fuel (5 digits) Consumption ‘A’ or ‘B’ for Resolution: 0.1 km that particular Trip meter Trip meter reading be- also will get reset. comes ‘0.0’ after it crosses Display Information Con- 9999.9 kms. trol (DIC) switch should be in ‘Trip’ mode. 3b Trip Meter reset Trip meter (A & B) are reset by pressing ‘Trip’ switch Fuel Computer - Range: 0 to 999 when the particular Trip- 6 Range meter is selected (Distance to Empty) DIC switch should be in ‘Trip’ mode. 7 Outside Ambient Range: -199 to +199 (2 Fuel Computer - Range: to (3 digits) Temperature 1/2 4 0.0 99.9 Instantaneous Resolution: 0.1 km/l or digits, leading zero’s Fuel Consumption L/ 100 km shall be suppressed) Range: to ( digits) 5a Fuel Computer - 0.0 99.9 3 Average Fuel Con- Resolution: 0.1 km/l or L/100 km sumption (A & B)

65 DASHBOARD AND FEATURES

Driver Information in TRIP, FUEL, In TRIP Mode SET Modes Display selection by ‘Selector’ switch Indication on If ‘selector’ switch is If ‘selector’ switch is Sr. Display pressed & released pressed & released No. immediately (Short after a delay Press) (Long Press) 1 Main Odometer Display changes to Trip Resets Trip meter ‘A’ and Trip meter ‘A’ meter ‘B’ with Main Odom- value and Average Fuel eter Consumption ‘A’ value 2 Main Odometer Display changes to Trip Resets Trip meter ‘B’ and Trip meter ‘B’ meter ‘A’ with Main Odom- value eter

In FUEL Mode Display selection by ‘Selector’ switch Sr. Indication on Display If ‘selector’ switch is pressed & re- If ‘selector’ switch is pressed & No. leased immediately (Short Press) released after a delay (Long Press) 1 Range (Distance to Empty) Display changes to Average Fuel Con- - sumption ‘A’ 2 Average Fuel Consumption ‘A’ Display changes to Average Fuel Con- - sumption ‘B’ 3 Average Fuel Consumption ‘B’ Display changes to Instantaneous Fuel - Consumption 4 Instantaneous Fuel Consumption Display changes to Average Trip Speed - 5 Outside Ambient Temperature Display changes to Range -

66 DASHBOARD AND FEATURES

In SET Mode

Display selection by ‘Selector’ switch Sr. No. Indication on Display If ‘selector’ switch is pressed & re- If ‘selector’ switch is pressed & leased immediately (Short Press) released after a delay (Long Press) 1 Select Units Display does not change. Cluster enters into ‘Distance unit selection’ mode. (Refer below section)

2 Language Selection (only for Display changes to ‘Unit Selection’ Cluster enters into ‘Language selec- export market) mode. tion’ mode. (Refer below section)

Switch Functions: Distance Unit Selection (If applicable)

Display selection by ‘Selector’ switch Sr. No. Indication on Display If ‘selector’ switch is pressed & released If ‘selector’ switch is pressed & immediately (Short Press) released after a delay (Long Press) 1 Distance Units Displays distance unit as ‘miles’ with arrow Display changes to ‘Fuel unit selec- mark. tion’ mode.

2 Distance unit with ‘miles’ Displays ‘Setting Saved’ for 3 secs. (i.e. Dis- Displays distance unit as ‘km’ with tance unit selected is ‘miles’) & display arrow mark. changes to ‘Fuel unit selection’ mode.

3 Distance unit with ‘km’ Displays ‘Setting Saved’ for 3 secs. (i.e. Dis- Displays distance unit as ‘miles’ with tance unit selected is ‘km’) & display changes arrow mark. to ‘Fuel unit selection’ mode.

67 DASHBOARD AND FEATURES

Switch Functions: Fuel Unit Selection (If applicable) Display selection by ‘Selector’ switch Sr. Indication on Display If ‘selector’ switch is pressed & released imme- If ‘selector’ switch is pressed & No. diately (Short Press) released after a delay (Long Press) 1 Fuel Units Displays Fuel unit as ‘L/100 km’ with arrow mark. Display changes to ‘Temperature unit selection’ mode. 2 Fuel unit with ‘L/100 km’ Displays ‘Setting Saved’ for 3 secs. (i.e. Fuel unit Displays Fuel unit as ‘MPG’ with selected is ‘L/100km’) & display changes to ‘Tem- arrow mark. perature unit selection’ mode. 3 Fuel unit with ‘km/l’ Displays ‘Setting Saved’ for 3 secs. (i.e. Fuel unit Displays Fuel unit as ‘L/100 km’ selected is ‘km/l’) & display changes to ‘Tempera- with arrow mark. ture unit selection’ mode. Switch Functions: Temperature Unit Selection (If applicable) Display selection by ‘Selector’ switch Sr. Indication on Display If ‘selector’ switch is pressed & released imme- If ‘selector’ switch is pressed & No. diately (Short Press) released after a delay (Long Press) 1 Temperature Units Displays Temperature unit as ‘°C’ with arrow Display changes to ‘Unit selec- mark. tion’ mode. 2 Temperature unit with Displays ‘Setting Saved’ for 3 secs. (i.e. Tempera- Displays Temperature unit as ‘°F’ ‘°C’ ture unit selected is ‘°C’) and display changes to with arrow mark. ‘Unit selection’ mode. 3 Temperature unit with ‘°F’ Displays ‘Setting Saved’ for 3 secs. (i.e. Tempera- Displays Temperature unit as ‘°C’ ture unit selected is ‘°F’) and display changes to with arrow mark. ‘Unit selection’ mode.

68 DASHBOARD AND FEATURES

Warning Lamps Tell Tales Color Indication Remarks

Malfunction Amber 1. Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ after 4 Indication Lamp seconds.

( MIL ) 2. It remains ‘ON’ for any engine related fault that may increase emission levels of the vehicle beyond the regulatory norms. Con- tact a TATA MOTORS Authorised Service Centre for rectification. Amber Check Engine 1. Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ after 4 seconds.

2. Illuminates continuously if a fault arises in Engine Management System. Contact a TATA MOTORS Authorised Service Centre. Red Immobilizer 1. Illuminates when the system disables engine start if the original key is not used.

2. Lamp blinks: Vehicle is in immobilized condition when key is not inserted. 3. Lamp ON: Problem with key/system. Contact a TATA MOTORS Authorised Service Centre.

Water in fuel Amber 1. Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ approx. in 3 seconds.

2. This lamp blinks continuously along with chime if excess water is accumulated in the fuel filter. Contact a TATA MOTORS Authorised Service Centre to drain the water immediately to avoid serious damage to the fuel injection system.

69 DASHBOARD AND FEATURES

Tell Tales Color Indication Remarks

Pre-Heat/Glow Plug indi- Amber 1. Illuminates when ignition key is in ‘ON’ position. cator 2. Engine shall be started only after this indicator goes ‘OFF’.

Turn Signal Green Indicates direction indicated by the turn signal. Blinks along with buzzer while operating left/right turn indicator only when ignition is switched ‘ON’. The direction indicator arrow on In- strument Cluster flashes along with external indicator lights as selected. Both telltales shall blink simultaneously when Hazard switch is pressed irrespective of Ignition ON and the Tick-Tock sound shall be given when any one or both the telltales are ON.

High Beam Blue Illuminates when the high beam headlamps are switched ‘ON’ or flashed.

Low Oil Pressure Red 1. Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ once required engine oil pressure is developed after starting the engine.

2 If the low oil pressure indicator does not glow or remains ‘ON’ with the ‘IGN’ ‘ON’ and engine is running, it indicates a fault in the electrical circuit / lubrication system. Contact a TATA MOTORS Author- ised Service Centre.

70 DASHBOARD AND FEATURES

Tell Tales Color Indication Remarks Battery charging Red Illuminates when ignition is switched ‘ON’. Once engine is started, it turns ‘OFF’. If it remains ‘ON’ while the engine is running, it indicates that the battery is not getting charged. Switch off all unnecessary electrical equipment and Contact a TATA MOTORS Authorised Service Centre.

Park Brake / Brake Fluid Red Illuminates momentarily when ignition is switched ‘ON’. Once parking Low / EBD Fault brake is released, it turns ‘OFF’. If it remains ‘ON’, it indicates

1. Brake fluid level is low. 2. Park brake is applied & turns ‘OFF’ when it is released. 3. Fault in EBD (Electronic Brake force distribution) system ABS Amber Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ in 4 seconds. Illuminates continuously if there is any malfunction in ABS. Normal braking system will be operational without assistance of ABS. Contact a TATA MOTORS Authorised Service Centre immediately.

Seat belt warning Red Seat belt warning indicator comes ‘ON’ for 4 seconds, when ignition is turned ‘ON’. Lamp shall be made ‘ON’ continuously for 30 sec, if seat belt is not fastened the lamp will be ‘ON’ continuously without audio alarm till vehicle speed reaches 16 km/h. When vehicle speed exceeds above 16 km/h, the lamp will continue to flash with intermittent audio alarm. Once the seat belt is fastened, the buzzer and warning indicator shall go ‘OFF’.

71 DASHBOARD AND FEATURES

Tell Tales Color Indication Remarks Airbag status Red Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ in approx. 4 seconds.

If it will continuously illuminate or blinks then Contact a TATA MO- TORS Authorised Service Centre immediately.

Front Fog Lamp Green Illuminates when the front fog lamp is ‘ON’. (if equipped)

Rear Fog Lamp Amber Illuminates when the rear fog lamp is ‘ON’.

(if equipped)

High Coolant Red Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ in approx. 4 seconds. Temperature If the engine is overheating, this indicator blinks along with an audible buzzer at his stage Contact a TATA MOTORS Authorised Service Centre immediately. This symbol blinks along with audible buzzer when engine coolant temperature is more than normal. When engine coolant temp increases to hazardous level, telltale shall blink with RED color and it is accompanied by audio warning. Never remove the radiator pressure cap from the radiator when the engine is hot. Do not restart the engine until the problem has been duly attended.

72 DASHBOARD AND FEATURES

Tell Tales Color Indication Remarks Traction Control / ESP Amber This symbol illuminates when ignition is turned ‘ON’ for approximately 4 sec. and turns ‘OFF’. Indicator (if equipped) This symbol continues to remain 'ON' if there is a fault in the

ESP/TCS system and it shall blink when intervention by ESP/TCS system is active. Take your vehicle to the nearest Tata Authorised Ser- vice Centre at the earliest.

Cruise Control Green Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ after. 4 seconds. (if equipped) This symbol illuminates when you activate/ switch ‘ON’ the Cruise

Control.

Daytime running lamps - Amber Illuminates when ignition is switched ‘ON’ and goes ‘OFF’ after. 4 DRL (if equipped) seconds. This symbol illuminates when the Day Time Running lamp is ‘ON’.

Low Fuel Amber Illuminates momentarily when ignition is switched ‘ON’. This symbol illuminates continuously if fuel level is low. Refill the fuel tank as soon as possible. NOTE: The warning light will start flashing if there is any fault in the fuel system. Contact a TATA MOTORS Authorised Service Centre immediately.

73 DASHBOARD AND FEATURES

Warning Lamps Color Indicator Remarks TOD (if equipped) Amber Illuminates momentarily when ignition is switched ‘ON’. If it continues to remain ‘ON’ or if it comes 'ON' after Ignition on pre-check, it

indicates a fault in the Transmission system. Take your car to a TATA Authorised Service centre. Driver Door Open --- If the Driver’s door is open or not properly closed, this symbol comes (if equipped) ‘ON’ once the ignition key is inserted. Please ensure all the doors are properly closed before you start driving.

Co-Driver Door Open --- If the Co-Driver’s door is open or not properly closed, the correspond- (if equipped) ing door open indicator will come ‘ON’. Please ensure all the doors are properly closed before you start driving.

Rear Left Door Open --- If Rear Left Door is open or not properly closed, the corresponding (if equipped) door open indicator will come ON. Please ensure all the doors are properly closed before you start driving.

Rear Right Door Open --- If Rear Right Door is open or not properly closed, the corresponding (if equipped) door open indicator will come ON. Please ensure all the doors are properly closed before you start driving.

Tail Gate Open --- If Tail Gate is open or not properly closed, the corresponding door (if equipped) open indicator will come ON. Please ensure all the doors are properly closed before you start driving.

74 DASHBOARD AND FEATURES

Audio Reminders 4) Reverse Gear reminder Headlamps The following are the Audible Reminder If reverse Gear engaged Buzzer shall warnings provided to the user. sound to alert you. This chime is applicable for both Manual and AT transmission 1) Key In reminder vehicles. While leaving your vehicle, if you forget key inside and Ignition is OFF, buzzer shall sound. Remove Key to stop the warning

2) Parking Lamp ON reminder While leaving your vehicle, if user forget to turn OFF the Head/Park Lamps, buzzer shall sound. Switch off Parking Lamps to stop the warning.

WARNING !s Ensure that parking lamps ! are! switched off, else it might drain vehicle battery and will lead to Enginef starting problem. s a 3) Parking Brake ON reminder f If Park Brake is applied and vehicle is driven above 5 Km/h, telltale shall blink! along with chime continuously. Disen-s gage the park brake to stop the warning! . f 75 s a DASHBOARD AND FEATURES

1. Auto Light (if equipped) lamps. First pull will turn ‘ON’ the front fog lamps and second pull switches ‘ON’ The headlights will be automatically the rear fog lamps. Similarly, the first switched ON depending on ambient light push will switch ‘OFF’ the rear fog lamps conditions (while entering a tunnel or and second push will turn ‘OFF’ the front when it is twilight). For more details, re- fog lamps. fer ‘DRIVER ASSIST’ section.

2. OFF All functions are ‘OFF’. Day time running lamps (DRL) will be ‘ON’. (if equipped)

3. Parking Lamp Parking lamps are switched ‘ON’.

4. Headlamp Head lamps and Parking lamps are switched ‘ON’. High beam/low beam can be selected using combi switch (Refer Combi switch section).

5. Fog Lamp (if equipped) For switching ‘ON’ the Fog lamps, either the Head Lamp or Parking lamp must be ‘ON’. Therefore, turn the knob to position 3 or 4. 1. Illumination control switch 2. Headlamp leveling switch The knob can be pulled / pushed in two positions to turn ‘ON’ / turn ‘OFF’ the fog 76 DASHBOARD AND FEATURES

1) Illumination control switch Day Time Running Lamps (DRL) Automatic DRL Deactivation and (if equipped) The function of Illumination control Activation switch is to vary the brightness of backlit You can disable or enable the DRL func- illumination of instrument cluster and tion. switches in the cabin. To Deactivate - 2) Headlamp levelling switch  Keep the Ignition switch in ON posi- Depending upon the number of occu- tion & switch ON-OFF parking lamp pants and luggage in the vehicle Head- twice within approx. 3 seconds. lamp focus may change. This can be adjusted by rotating the switch to one of To Activate - the three level positions.  Keep the Ignition switch in ON position & switch ON-OFF parking lamp twice within approx. 3 seconds. NOTE Day time Running Lamps (DRL) are used When the low beam is switched ON, to increase the visibility of the vehicle to adjust the headlamp range to suit other drivers during daytime. the vehicle load. Adjust when vehicle is stationary. DRL Activates when: Ignition switch is in ON position and Head Lamp rotary switch in OFF position.

77 DASHBOARD AND FEATURES

Combi-Switch (LH Stalk) wipes across the windshield at low speed till the stalk is released.

5) Front windshield wash and wipe  Pull the lever little longer, washer fluid will be sprayed on the windshield.  The windshield wipers operate for 3 cycles after the lever is released and 1 more cycle after approx. 5 seconds.

Inner rotary switch on left hand stalk is NOTE provided for intermittent front wiper de- When you crank the engine, the 0) OFF position lay. The switch has delay timers. 5 supply to washer motor is briefly cut The wiper is switched ‘OFF’. 2) Slow Wipe off. 1) Intermittent wipe Push the stalk towards position (2) for continuous slow wipe. Push the stalk upwards to operate in- WARNING !s termittent wipe. 3) Fast Wipe If you operate wash and wipe func-! Push the stalk towards position (3) for ! tion for more than approx. 30 sec- continuous fast wipe. onds the controller cuts off the sup-f s 4) Flick Wipe ply to washer motors to avoid over- (Spring return) heating. a Pull the stalk downwards and hold it for f continuous wipe, the wiper continuously ! s ! 78 f s DASHBOARD AND FEATURES

6) Rear windshield wash and wipe Rear wiper continuous ‘ON’ WARNING ! Turn the rotary knob and align to position s with arrow mark to operate the  Do not operate the windshield! rear wiper in continuous mode. wipers, when the windshield f is dry or obstructed. s NOTE  Always check and top up the windshield washer fluid in thea Rear wiper will not operate if tailgate container. is open. f  Get the front and rear washe! r Auto front wipe (if equipped) nozzles cleaned periodically. If your vehicle is fitted with a Rain and Light Sensor, Auto Front Wipe is activated only when the wiper stalk is in the Turn the outer rotary knob such that it ‘Auto’ position. The wipe sensitivity can aligns its position with arrow be altered with the help of intermittent mark and hold it, to operate rear wind- wipe rotary switch. shield wash and wipe. For more details, please refer ‘DRIVER ASSIST’ - Rain and Light sensors’ sec- It will return to ‘OFF’ position as soon as tion. released.

Rear intermittent wipe NOTE Turn the outer rotary knob and align to Turn the ignition switch to ‘ON’ posi- position with arrow mark to option, to operate all wash and wipe erate rear intermittent wiper. Rear wiper functions. All functions pauses tem- will start wiping intermittently. porarily, when the engine is being cranked and resumes its function once cranking is complete.

79 DASHBOARD AND FEATURES

Combi-Switch (RH Stalk) 4. Hi-Beam 6. TRIP, FUEL, SET functions To switch over head lamps to hi-beam:  Turn the master light switch to head lamp position.  Push the lever away from steering wheel.  Hi-beam headlamps and instrument cluster tell-tale will turn ‘ON’. To switch over from high beam to low beam, PULL the lever back towards the steering wheel.

5. High beam Flash (spring return) 1. Left Turn signal By rotating the outermost ring of the To flash the high beam, pull the lever Combi Switch, you can set the TRIP, Move the lever fully upward. towards you from the normal position. It FUEL and SET functions that are dis- 2. Right Turn signal will return to its normal position when played on the instrument cluster. To re- you release it. set/scroll the values, press the outer- Move the lever fully downward. most selector switch on the stalk. 3. Lane Change Signal For more details, please refer ‘Driver To signal a lane change, move the lever Information Screen’ section. slightly up or down to the point where the turn signal light begins to flash, but the lever does not latch. The turn signal will flash 3 times automatically.

80 DASHBOARD AND FEATURES

Fascia Switches Mic (if equipped) NOTE Fascia switches are provided on the cen- A mic is provided on roof interior for Reverse park assist switch can be ter console above HVAC control panel. phone calling and voice command. used to turn ‘ON’ the Rear View Camera (if equipped) even if vehicle is not in reverse gear.

2. Hill Descent Control (HDC) Switch (if equipped) Activate the HDC for a smooth and controlled hill descent by enabling the vehicle to use the ESP to control the speed of each wheel. For detailed information on Hill Descent Control (HDC) refer ‘DRIVER ASSIST’ 1. Rear Park Assist Switch (if equipped) section. 2. Hill Descent Control (HDC) Switch (if equipped) 3. Door Lock / Unlock Switch 3. Door Lock / Unlock Switch 1. Rear Park Assist Switch Press the Lock/Unlock switch to lock/unlock all the doors. (if equipped) Reverse park assist system gets activated when you engage reverse gear with a simultaneous beep sound. The intensity of the beep keeps on increasing as your vehicle comes closer to the obstacle. Press the switch to mute the beep.

81 DASHBOARD AND FEATURES

Steering Wheel Switches (LHS) the required source in the infotainment (USB, AUX, AM, FM). NOTE (if equipped) For more details about steering Steering Wheel Switches (RHS) wheel switches, refer infotainment (if equipped) system online manual. Infotainment System (if equipped)

1. Volume

Press to increase and to decrease volume of music system/radio. 1. Phone receive (if equipped) This button is used to accept 2. Mute / phone reject NOTE incoming call when a cell phone is con- To reject or hang up a phone call. nected via Bluetooth. For more information on infotain- It is also used to mute the volume of ment system refer online manual, music system/radio. 2. Cruise control switches (If equipped) (http://service.tatamotors.com/cont 3. Seek forward / backward For detailed information on cruise con- ent/owners-manual). trol steering switches refer Cruise Con- To change radio channels. trol in ‘DRIVER ASSIST’ section. 4. Source – Press to select 82 DASHBOARD AND FEATURES

Speakers (if equipped) 1. On Dashboard center console USB/AUX Port (if equipped) 2. On 2nd row center console- (If appli- Speakers and tweeters are provided on cable) models with infotainment system. The power socket will work when the Audio Amplifier (if equipped) ignition switch is in ACC or ON position. Audio amplifier is provided with two addi- This socket can be used to provide 12V tional speakers (center speaker and sub- (10A) power for electrical accessories. woofer). Amplifier provides processed amplified output to all speakers, tweeter NOTE and sub-woofer. Use of inappropriate electrical accessories can cause damage to your Power Socket vehicle’s electrical system. Make sure that any electrical accessories Front USB/AUX you use are designed to plug into Connect your portable digital music play- this type of socket. ers, pen drives etc. to this socket for playing music tracks through the vehicles music system.

NOTE Remove the plugged cables, devices every time after use or when not in use. Front Power Socket Two power sockets are provided at following locations:

83 DASHBOARD AND FEATURES

Smart USB charger & Power Socket (if equipped) NOTE The smart USB charger shall be used only for USB charging. It does not support USB communication.

NOTE Phone or tablet charging may vary from device to device.

WARNING ! s  Do not use excessive force while Power Socket ! 1. handling USB port. 2. Smart USB Charger f  Avoid insertion of any hard, sharp Smart USB charger is located on rear of or metallic object in the USB slot.s center console.  Avoid spraying or spilling of clean-a ing solution, perfume, car fresh- The USB Charger provides current as per f eners, beverages, caustic chemi-! the charging requirement of connected cals or any liquid on USB slot. device. It can charge devices that draw  The engine should be running 5V/2.4A or less. when using accessories for long The charger has illumination for night period. Failure to do so can dis- time visibility. charge the battery.

84 DASHBOARD AND FEATURES

Roof Lamps Three interior roof lighting lamps are provided on the roof with inbuilt switch. The central rectangular switch has three positions:

ON - The lamp will turn ON as long as the switch is in this position. - In this position the DOOR lamp turns ON with dimming Front roof lamp Rear roof lamp (if equipped) when either of the doors are opened. When the last door is closed, the lamp will remain ON for approx. 25 sec and turns OFF with dimming. This helps settling in the seat and inserting the key in the ignitions switch. When the key is turned to the IGN position, the lamp goes OFF immediately.

OFF - In this position the lamp will remain OFF.

Central roof lamp

85 DASHBOARD AND FEATURES

Mood Lights Sun Blinds - Rear Windows (if equipped) Switching on & Off Mood Lighting: The sun blinds in the rear door trim pan-  Mood Lights turn on in white color els can be pulled out and secured in the whenever parking light switch ON. holders.  Mood Lights turn off whenever parking light switch OFF.

Mood Lights (Entry/Exit):  Mood Lights turn on in white color whenever roof lamp made active by removing the ignition key from key barrel and opening any door.  Once the opened door is closed, the Mood lights dims off after approximately 25 sec.

 If door is left open, Mood lights will turn OFF after set battery saver time. NOTE Pull out sun blinds during the journey, only when door windows are closed. When retracting the sun blinds disen- gage the sun blind from holders and carefully guide it back into the retractor roller.

STOWAGE AREAS

Stowage Compartments

88 STOWAGE AREAS

Top Stowage Compartment Lower Glove Box WARNING ! s A top stowage compartment is provided Another glove box is provided below up- Stow the objects/luggage correctly! above the upper glove box, where you per glow box. It can be locked with the and secured properly, otherwise they can keep small items. ignition key. can slide or be thrown around andf hit vehicle occupants. There is a risks There are two glove boxes located on the of injury, particularly in the eventa of dashboard. sudden braking or a sudden changef in direction. Chiller Glove Box ! Upper Glove Box is provided with a cool-  Always stow objects in such a way ing facility. It cools the glove box only that the objects do not get thrown when the front A/C is ON. Shut OFF the around during sudden braking. vent by rotating the knob, whenever cool-  Always make sure that objects do ing is not required. not protrude from stowage spac- es, parcel nets or stowage nets.  Close the lockable stowage spac- es before starting a journey.  Stow and secure objects that are NOTE heavy, hard, pointed, sharp- edged, fragile or too large in the Make sure that glove box flap is luggage compartment. closed while driving.

89 STOWAGE AREAS

Below The Arm Rest Cup Holders Middle Row (Central Console) Stowage space is provided below front Push the cover gently to open and ac- arm rest. To access, press the knob and NOTE cess the cup holders. lift the arm rest. Use cups, containers, bottles of right size and which have lids. The drinks could otherwise spill.

On Central Console A single cup holder is provided on central console.

90 STOWAGE AREAS

Third Row Seat Foldable Arm Rest (if equipped) Utility Pockets (front & rear doors) Cup holders are provided on both sides Utility pockets are provided on front and for third row passengers. Lift the cover to rear doors and it can be used to keep access the cup holders. magazines/books, water bottles etc.

A foldable arm rest has been provided in the second row (60:40) seat. It also has two cup holders and a utility box, which can be accessed by opening the cover.

When not required, fold the armrest back

into the seat.

NOTE Remove all items and cups before folding the cup holders.

91 STOWAGE AREAS

Tailgate (Trunk) Compartment Third row seat folding Store the luggage in the trunk. You can increase the trunk capacity by folding the third row seats. Pull the fabric hook and fold the seat backrest forwards. Both the seats can be independently folded to create extra luggage space.

WARNING !s Distribute the items of luggage ! as evenly as possible. Position heavy loads as forward f as possible and distribute evenly. s The load must not protrude abovea the luggage cover. f Never allow occupants to travel ! in the luggage compartment

92 STOWAGE AREAS

Second row seat folding WARNING ! For folding: s You should always engage the rear!  Keep the head restraint at its lowest seat if you do not need the through position. loading feature. f  Pull the backrest release hooks and If the rear seat and seat backrest ares fold the seat backrest forwards. not latched they could fold forwards,a  Move the driver or front passenger e.g. when braking suddenly or in thef seat forward if necessary. event of an accident. The vehicle occupant would thereby! be pushed into the seat belt by the rear bench seat or by the seat Backrest unlocked backrest. The seat belt can no longer offer the intended level of protection and could even cause injuries. Objects or loads in the trunk cannot be restrained by the seat backrest. There is an increased risk of injury. Before every trip, make sure that the seat backrests and the rear seats are latched securely.

Backrest folded

93 STOWAGE AREAS

To Access Third Row Seats The second row seat can be tumbled from its base by pulling the fabric hook WARNING !s Fold the second row seat and pull the located behind the seat’s back. knob provided at the base of the seat. The coat hook cannot restrain heavy! objects or items of luggage. While folding the second f row seat after getting in- Never hang hard, sharp edged or side the third row seat, fragile objects on the coat hook. s never keep your feet on a the seat locking brackets. f

Coat Hook !

Coat hooks are provided on second row side grab handles.

CLIMATE CONTROL

CLIMATE CONTROL The Climate control regulates the temperature set in the vehicle interior and filters dust particles. Air is distributed through following air vents:

96 CLIMATE CONTROL

Air Vents Front side air vents Side air vents (two each) are provided for second and third row occupants. Air flow and its direction can be adjusted with the help of knobs provided on respective vent.

Front air vents Four air vents are provided on dashboard.

Second row center console air vents Two air vents are provided on second Second row side air vents row center console.

Center air vents

Third row vents Rear side air vents 97 CLIMATE CONTROL

Heating, Ventilation and Air Fully Automatic Temperature provides maximum passenger comfort Conditioning (HVAC) Control (FATC) – (if equipped) regardless of the outside weather conditions. The HVAC system is operational when engine is running and blower is ON. It Automatic Operation regulates the temperature in the vehicle To put the climate control in fully interior and filters dust particles. automatic mode: Either of the following HVAC system is  Press the ‘AUTO’ button. provided on your vehicle.  Set the desired temperature by turn- 1. Fully Automatic Temperature Control ing temperature control knob. The (FATC) display will show all the functions dur- 2. Manual HVAC ing ‘AUTO’ mode.  The System automatically selects the 1. Temperature Control Knob proper mix of conditioned and / or 2. A.C. ON / OFF Button heated air that will, as quickly as possible, raise or lower the interior 3. AUTO Mode Selection Button temperature to your preference. . Demister / Heater Button (Rear) 4  To come out of ‘AUTO’ mode, press 5. Windshield Defroster Button (Front) ‘AUTO’ button again. 6. Air Distribution Mode Button 7. ECON (Economy) Mode Selection Button 8. Blower Speed Control Knob 9. Recirculation Button 10. Display FATC system controls the in-cabin temperature of the vehicle automatically and 98 CLIMATE CONTROL

Semi-automatic Operation Recirculation mode: (Indicator light ON) Making any manual selection causes the Air in the passenger compartment recir- word ‘AUTO’ in the display to turn off and culates. No fresh air enters the com- overridden setting is displayed. System partment. will remain in semi-automatic mode till ‘AUTO’ is pressed again. Always use when:  Driving on a dusty road or through A.C. ON/OFF Button tunnel. Press the A.C. ON/OFF button to  On signals or slow traffic to avoid turn the air conditioning ON or OFF. LED traffic pollution. will glow when AC is ON.

 Maximum cooling is required. Air intake selector NOTE Fresh Air mode: (Indicator light OFF) Press the switch to activate / deactivate The AC will be switched ‘ON’ only if recirculation mode. Fresh air is drawn into the vehicle. the blower is ‘ON’ and engine is running. Always use when:

Temperature Control Knob  Discomfort is felt or windows are fogging up. The temperature control dial allows you  Using or air flow modes to adjust the temperature. Turn the dial counter-clockwise to lower the tempera- during demist / defrost. ture. To increase the temperature, turn  Using normal heating mode. the dial in clockwise direction.

99 CLIMATE CONTROL

Blower Speed Control Knob Air Distribution Control Button In AUTO mode, the FATC system will regulate the blower speed automatically. However, user override is possible with the use of air distribution control button to select the desired airflow mode. Each time you press the air distribution control button the display shows the mode selected.

NOTE If the display flashes ‘ERR’ in periodic pattern (Display will show ‘ERR’ Press the button to select one of the for sec. and set temperature for This is to turn ‘ON’ the blower and select following air distribution mode. 5 30 desired blower speed. sec.) It indicates FATC malfunction- Directs air through the center ing. Switch over to manual mode In ‘AUTO’ mode, the FATC system will and side air vents and contact TATA MOTORS Author- regulate the blower speed automatically. Directs air through the cen- ized Service Centre. ter, side and foot well vents To switch ‘OFF’ climate control system, turn the blower speed control knob in extreme Directs air through the foot counter clockwise direction. well air vents Directs air through the defroster & foot well vents (De- NOTE fault fresh air mode)

To avoid stale air and collection of Directs air through the de- mustiness, you should have the froster vents (Default fresh blower fan running at all times. air mode)

100 CLIMATE CONTROL

Windscreen Defroster Button ECON A.C. In-Vehicle Sensor

(Front) During ECON A.C. operation, the system In-vehicle sensor is located on the cover automatically cuts off compressor at a of instrument cluster. This button directs the main airflow to- higher temperature than normal A.C. The wards windscreen for faster defrosting. It operation can be used during mild also overrides any mode selection you weather conditions for better fuel effi- may have made. ciency. Comfort level may be compro- When you select windscreen defroster mised during this operation. button the system automatically switches to fresh air mode and turn on the A.C. Sensors FATC system is fitted with 3 sensors. When you turn OFF the button again the system returns to its former settings. Solar Sensor A solar sensor is provided on top of the NOTE dashboard on the right side of defrosts For your safety make sure you have grill. a clear view through all the windows Outside ambient temperature sen- before driving. sor Outside ambient temperature sensor is Demister / Defogger Button located behind front bumper grill. Press the demister button to activate rear windshield and outside rear view WARNING ! mirror (if equipped) demister. The system s deactivates after 15 min of continuous  Do not spill any liquid on sensors.! operation.  Do not cover sensor, this mayf cause the sensor to malfunction. You can also deactivate by pressing de- This may lead to FATC not func-s mister button. tioning to desired level. a

f 101 ! CLIMATE CONTROL

Manual Heating, Ventilation and 6. Rear Defogger / Demister Button Recirculation Button Air conditioning (HVAC) The system has a separate auxiliary rear Press the switch to activate / deactivate (if equipped) cooling system along with adjustable recirculation mode. vents for 2nd and 3rd row occupants. The HVAC is operational when engine is running and blower is ON. The Climate Temperature Control Knob control regulates the temperature in the vehicle interior and filters dust particles. You can manually set the desired temperature

Recirculation mode: (Indicator light ON) Air in the passenger compartment recir- The temperature control dial allows you culates. No fresh air enters the com- to adjust the temperature. Turn the dial partment. counter-clockwise to lower the tempera- Always use when: 1. Temperature Control Knob ture. To increase the temperature, turn 2. Recirculation Button the dial in clockwise direction.  Driving on a dusty road or through 3. Blower Speed Control Knob tunnel. 4. A.C. and Econ (Economy Mode) ON/OFF  On signals or slow traffic to avoid Button traffic pollution. 5. Air Distribution Control Knob  Maximum cooling is required. 102 CLIMATE CONTROL

Fresh Air mode: (Indicator light OFF) To switch OFF, turn the blower speed control knob in extreme counter clockwise NOTE Fresh air is drawn into the vehicle. direction The AC will be switched ON only if the Always use when: blower is ON and engine is running. A.C. mode ON-OFF Button  Discomfort is felt or windows are When AC is switched ON, engine idling fogging up. RPM increases marginally to adjust the AC compressor load.  Using or air flow modes during demist / defrost. When desired temperature is  Using normal heating mode. achieved AC trips OFF automatically.

Blower Speed Control Knob This is to turn ON the blower and select desired blower speed.

Press the switch to activate / deactivate the climate control. The indicator lamp in the button will light up when climate control is activated. First Press: Normal A.C.is switched ON. Second Press: ECON mode turns ON with A.C. Third Press: Both A.C. and ECON functions are switched OFF.

103 CLIMATE CONTROL

Econ A.C Air Distribution Control Knob Demister / Defogger Button

During ECON A.C. operation the system Press the button to select one of the Press the button to turn ON the rear automatically cuts off at a higher tem- following air distribution mode. windshield and outside rear view mirror perature than normal A.C. The operation Directs air through the cen- (if equipped) demister. This clears the ter and side air vents can be used during mild weather condi- fog / mist formation. tions for better fuel efficiency. Comfort Directs air through the cen- The indicator on the button turns ON level may be compromised during this ter, side and foot well vents Directs air through the foot when the rear demister is ON. The de- operation. well air vents mister turns OFF automatically after 15 Directs air through the de- minutes. froster & foot well vents (De-

fault fresh air mode) You can also deactivate by pressing de-

mister button. Directs air through the defroster vents (Default fresh air mode)

104 CLIMATE CONTROL

Rear A.C. Operating instruction performance. NOTE Start the vehicle with AC & Blower in  Condensation may drip from the OFF condition in idling for 2~3 underside of the vehicle when it minutes. is in cooling mode. Traces of wa- Then switch ON the AC & Blower and ter on the ground are normal and run it for another 2~3 minutes in are not a sign that there is a mal- idling for proper circulation of refrig- function. erant & oil to lubricate the internal  Ventilate the vehicle for a brief parts of AC system. period during warm weather. This will speed up the cooling process and the desired vehicle interior temperature will be reached quickly. Separate auxiliary unit is provided for  Never cover the air vents or air rear AC. intake grilles in the vehicle interior. Rear A.C. blower control switch is provid- If the AC is not used for a long ed on the roof near interior lamp. De-  sired speed can be selected for second period, such as during winter, it may not give the best perfor- and third row occupants. The cool air will mance when you start using it come when front A.C. is ON. again. Operate the AC at least Keep air vents fully closed, when and once a month to maintain opti- where not required. mum performance.  While starting the vehicle itself

after long duration (more than 15 days), following procedure needs to be followed to meet AC

105 CLIMATE CONTROL Recommended basic settings of the control elements of air conditioning system for the respective operating modes. These may vary depending on individual requirements and weather conditions.

Control Knob Position Button Position

A. Air Flow Direction B. Blower Speed C. Air Temperature D. Air Intake E. AC ON / OFF Functions

nd rd Normal heating or 2 or 3 position Desired temperature Fresh air mode Switched OFF To MAX speed and Briefly switch ON to To the right up to the then 2nd or 3rd Fresh air mode then Switched OFF Quick heating stop position Recirculation mode Recirculation or st to rd position Desired temperature Switched ON Normal Cooling 1 3 mode To MAX speed and To the left up to the Recirculation or then nd or rd po- Switched ON Quick Cooling 2 3 stop mode sition Fresh air mode Switched ON Demisting 2nd or 3rd position Desired temperature (Default) (Optional) Fresh air mode Switched ON To MAX speed Desired temperature Defrosting (Default) (Optional)

106

STARTING AND DRIVING

Pre Driving Checks Daily check: WARNING ! Make sure that:  Tyres for abnormal wear, cracks or Objects in the driver's footwell can re- damage and embedded foreign mate-  Windshield, windows, mirrors, lights, strict the pedal travel or obstruct a de- rial such as nails, stones, etc. and reflectors are clean and unob- pressed pedal. The operating and  Traces of fluid and oil leakage below structed. road safety of the vehicle is endan- vehicle.  Tools kit, jack & handle, warning trian- ger. There is a risk of an accident. gle, owner’s manual, first aid kit and Make sure that all objects in the vehi- vehicle documents are available and cle are stowed correctly, and that they NOTE stored at their locations. cannot enter the driver's footwell. In- Water dripping from the air condition- stall the floor mats securely and as ing system after use is normal. specified in order to ensure sufficient NOTE clearance for the pedals. Do not use  All lamps, wipers, wiper blades and Regularly check and replenish the loose floor mats and do not place horn for proper operation. first aid kit contents. floor mats on top of one another.  All switches, gauges and tell tales are

working properly.  All doors, engine bonnet and tail gate are securely closed and latched. WARNING ! Adjust:  All occupants are properly restrained Unsuitable footwear can hinder cor-  Seats, head restraints (if equipped) and should always wear seat belts or rect usage of the pedals, e.g.: and steering wheel position. use child restraints system.as applica- shoes with thick soles  All the mirrors properly. ble   shoes with high heels  Objects, luggage or loads are secured Weekly check:  slippers properly against slipping or tipping.  Engine oil and coolant level  Rear seats are securely latched. There is a risk of an accident.  Brake and steering fluid level Wear suitable footwear to ensure cor-  Sufficient fuel for the trip.  Windshield washer fluid level rect usage of the pedals.  Battery electrolyte level

108 STARTING AND DRIVING

 Driving safety systems are merely aids NOTE NOTE designed to assist driving. You are re- Check the tyre pressure regularly in- Do not warm up the engine with the sponsible for the distance to the vehi- cluding spare wheel. vehicle stationary. Drive off immedi- cle in front, for vehicle speed and an- ately. Avoid high engine speeds and ticipating braking in good time. Driving Tips driving at full throttle until the engine has reached its operating tempera- Fuel consumption, engine, transmission, WARNING ! brake and tyre wear are affected by below ture. factors: You could lose control of your vehicle  Always adapt your driving style to suit if you try to adjust the driver's seat,  Operating conditions of your vehicle the prevailing road and weather condi- head restraint, mirror, steering wheel tions and maintain a safe distance  Your personal driving style and fasten the seat belt while driving. from the vehicle in front. Drive care- There is a risk of an accident. Operating conditions: fully.  Avoid frequent, sudden acceleration Recommended fuel economy  Avoid frequent start and stop as these and braking. speeds increase fuel consumptions.  Select appropriate gear according to  Always make sure that the tyre pres- Gear Speed (km/h) varying speeds and load conditions. sures are correct. 1 10  Do not carry any unnecessary weight. NOTE  Regularly service your vehicle and ad- 2 20 Do not rest your foot on the clutch pe- here to the recommended service 3 35 maintenance schedule. dal while driving. 4 50 Personal driving style  Switch off the engine in stationary traffic or at signals. 5 65  Do not depress the accelerator pedal  Keep an eye on the vehicle's fuel con- when starting the engine. 6 75 sumption.

109 STARTING AND DRIVING

Good driving practices Tips for obtaining better fuel effi- speeds which indirectly implies less ciency distance with more fuel.  Slow down before shifting to a lower  Be in the maximum possible higher gear. This will help avoiding revving of  Always maintain the specified tyre gear at a given speed. This reduces the engine causing damage. pressure during fuel top-ups and also the engine operating speeds which before a long trip. Vehicle running with  Avoid frequent brake application means the engine is running at lower low tyre pressure will consume more which can cause overheating of rpm (Revolutions per Minute) for the fuel than the one running with speci- brakes. Anticipate your stops properly. same vehicle speed. Lesser the num- fied tyre pressure.  Slower the vehicle speed while travel- ber of engine revolution lesser the fuel ling in cross winds. This gives much  Keep the vehicle clean. Get rid of the burned. better control over the vehicle. not in use luggage/stuff lying in the  Avoid harsh braking.  Avoid high speed when cornering or boot etc.  Maintain healthy driving habits & Regularly inspect your vehicle for any turning.  while decelerating, do coasting in gear leakages, worn out wires by rat bites  Depress the clutch fully while shifting and not in neutral or with clutch pedal etc. gears. depressed. Make sure that vehicle is completely  Always follow periodic & regular ser-   Consider using the AC when you really vice schedule of the vehicle. stationary before you attempt to shift require. Consider using lower blower in reverse gear.  In places with high dust content check speeds rather than higher for cooling  Drive slowly on wet roads. the air filter frequently for clogging. as at higher blower speeds it con-  You can get extra braking from the en-  Drive smart and smooth in an antici- sumes more electric power which is ul- gine when slowing down by shifting to patory manner. Select driving mode to timately drawn from engine by burning a lower gear. This can help you to suit your style. fuel. maintain a safe speed and prevent  Do not accelerate excessively when  Avoid unnecessary extra electrical your brakes from overheating spe- you are in lower gears (1st or 2nd). Be loading on the vehicle. cially while going down a hill. gentle on the accelerator when you  Stop the engine wisely at traffic sig- are in traffic. In lower gear, opening nals. Switch ‘OFF’ the engine at the more throttle will shoot the engine RPM keeping the vehicle still at lower 110 STARTING AND DRIVING

traffic signal only if the stoppage time Running-in period Do not exceed the following road speeds is high (typically more than sec). during running in period 30 The more you look after the engine when While driving on highways, drive with  it is new, the more satisfied you will be (Applicable for manual transmission). windows closed. The more you open with its performance in the future. the windows the higher will be the re- Gear Speed (km/h) sistance to the vehicle at higher  You should therefore drive at varying speeds which will reduce the fuel effi- vehicle and engine speeds for the first 4x4 4x2 ciency. 1500-1800 kms. 1 20 20  Do not over speed; follow the speed  Avoid heavy loads, e.g. driving at full limits. More the speed, higher the ex- throttle, during this period. 2 40 35  Change gear in good time, before the ternal resistance on the vehicle which 3 60 55 will finally result into unnecessary con- tachometer needle is 2/3rd of the way sumption of fuel. to the red area of the tachometer. 4 80 75  Do not manually shift to a lower gear 5 110 100 to brake the vehicle.  Try to avoid depressing the accelera- 6 120 110 tor pedal beyond the point of resistance.  Change gear judiciously.

NOTE Avoid excessive revving up of engine rpm. Do not keep engine at idling for long duration.

111 STARTING AND DRIVING

Seat Adjustments To lower the seat, pump the lever down- WARNING ! ward until the seat is at desired height. Front seat adjustments You could lose control of your vehicle Following seat adjustments can be car- if you try to adjust the driver's seat, Seat forward / rearward adjustment ried out manually. head restraint, mirror, steering wheel Lift lever (3) and slide the seat forwards or and fasten the seat belt while driving. rearwards. Release lever and make sure There is a risk of an accident. that seat is securely latched. Seat backrest angle adjustment NOTE To change the seat back rest angle, lean Adjust the driver seat position in such forward slightly and pull up the lever (1). a way that the driver will be able to Adjust seat backrest until it reaches de- operate the controls pedals comfort- sired comfortable position. Make sure ably. that lever returns to its original position

and seat is securely latched.

WARNING ! 1. Arm rest. Never travel in a moving vehicle with 2. Lumbar support the seat backrest in an excessively re- 3. Backrest angle clined position as this can be danger- 4. Seat height adjustment ous. You could slide under the seat 5. Seat forward / rearward adjustment belt in a collision. lever Seat height adjustment To raise the seat, pull and continue pump- ing the lever (2) in the upward direction until the seat is at the desired height.

112 STARTING AND DRIVING

Lumbar Support (if equipped) Adjustable head restraint (if equipped) WARNING ! Do not drive the vehicle without the seat head restraints. Head restraints are intended to help reduce injuries during an accident.

Rear seats adjustment For second row seat adjustment, lift the lever and slide the seat forwards or rearwards. Release the lever and make sure that seat is securely latched.

Continuous (Multiple adjusting position) lumbar support is provided on driver and front passenger seat to give you comfort while driving. It is adjusted by the lever provided on the side of the seat backrest.

Adjust the head restraint so that it is as

close to the head as possible and the center of the head restraint supports the back of the head at eye level. This will re-

duce the potential for injury to the head Foldable second row ( or captain) and neck in the event of an accident or 60:40 seats are provided to access the third similar situation. row. Refer ‘Stowage area’ section for seat

113 STARTING AND DRIVING folding procedures and access to third row seats. NOTE Use antiglare position only when nec- Third row seats are non-adjustable fixed essary, as it reduces rear view clarity. type seats. Motorized outer rear view mirrors Rear View Mirrors (ORVM) and power fold (if equipped) Inside Rear View Mirrors (IRVM) Motorized outer rear view mirrors are fitted on both front doors and can be adjusted to the desired position with the help of a switch provided on the driver side door. 1. ORVM fold switch (if equipped) Motorized outer rear view mirrors allow . Mirror selection switch the driver to adjust the mirrors without 2 . Mirror adjustment switch lowering the glasses and without moving 3 from his position. To adjust the ORVM: You can adjust the mirrors when the igni-  Move the mirror selection switch to L tion switch is in the “ACC” or “ON” posi- (for left side) and R (for right side) tion.  Use the 4 positions of the knob to ad- To adjust the mirror, set the selector tab just the rear view mirrors to required to the normal or antiglare position and NOTE position. then move the mirror up, down or side- Objects visible in mirror are actually ways manually to obtain the best rear closer than they appear. Always view. make sure of the actual distance When driving at night, set the selector tab from the road users traveling behind to select anti-glare mode to reduce glare by glancing over your shoulder. from vehicles behind you. 114 STARTING AND DRIVING

Outer rear view mirrors can be folded by 1. Mirror cover 2. Vanity mirror operating the mirror fold switch (3). This 3. Bracket enables you to park your vehicle in limited The sun visors (with extensions) can be parking space. Press the mirror fold switch to fold both outside mirrors simul- pulled down to block glare coming taneously. Press again to unfold. through the windshield. Demister (if equipped) To block glare from side windows These mirrors are provided with Pull down the sun visor and release it demister. For activating the rear view mir- from the bracket. Swing the sun visor to ror demister and rear windshield de- the side. mister, a common switch is provided on

the A.C. panel. WARNING ! ORVM folding (if equipped) Sun Visors If the mirror cover of the vanity mirror is folded up when the vehicle is in motion, you could be blinded by incident light. There is a risk of an accident. Always keep the mirror cover folded down while driving.

115 STARTING AND DRIVING

Steering Wheel Adjustment  Pull release lever up completely to Steering lock cum ignition switch lock the steering column.  Make sure that steering wheel is securely locked by checking up and down direction.

NOTE When adjusting the steering wheel, make sure that: You can operate control pedals without any obstacles. You can see all the displays in the instrument cluster clearly. You can adjust the steering wheel posi- The ignition switch has the following four tion to suit your convenience. positions:

The release lever is located under the WARNING ! LOCK - This is the normal parking posi- steering column. Before starting off, make sure the tion. Key from lock can be removed in this steering wheel position is locked. position only. To adjust the steering wheel Never unlock or adjust the steering “LOCK” position prevents normal use of  First, adjust the seat to a comfortable wheel while the vehicle is in motion. the steering wheel after the key is re- position. moved.

 Push release lever completely down to To release the steering lock, insert the key unlock the steering column. and turn it clockwise to one of the other  Adjust the steering wheel to the de- positions. sired position.

116 STARTING AND DRIVING

ACC - Accessories such as the infotain- 4. Not allowing starter motor to crank the ment system can be operated, but the en- NOTE engine under low battery condition to gine remains ‘OFF’. Steering gets un- The Starter protection system fitted avoid further draining if battery. locked. in this vehicle does not allow you to crank the engine until you fully de- This is the normal operating posi- NOTE ON - press the clutch pedal / brake pedal tion. All electrical systems are ‘ON’. (for AT). After starting, run the engine in idle speed for at least 30 seconds. Do not START - Turn the key further clockwise to the START position, (spring loaded) to If the engine does not start immediately, press accelerator pedal while starting start the engine. As soon as the engine hold the ignition key at crank position for the engine to avoid damage to turbo- starts, release the ignition key, which re- approx. 2 secs. This will help to start the charger (in case of diesel vehicles). turns to ON position. While cranking, all engine if starter motor is in fail safe condition operation. accessories will be momentarily ‘OFF’. Starting off In case of unsuccessful/delayed engine Illuminated Key Ring Manual Transmission start, kindly contact authorized TATA MO- Illuminated key ring is provided on ignition TORS service center. To start off, depress the clutch pedal fully switch. This helps to locate ignition switch and shift into 1st gear. in the dark. Starter Protection System After releasing the parking brake, gradu- Starting the Engine This Starter Protection system provided ally release the clutch and slowly press the following safety conditions: the accelerator. Make sure that parking brake is engaged and vehicle is in neutral gear (Park Mode 1. Automatic disengagement of starter Automatic Transmission for automatic transmission). motor once the engine is started to To start off, depress the brake pedal fully, avoid over running of starter motor. Depress the Clutch (Brake pedal for auto- press the shift lock button on the knob of Not allowing starter motor to engage matic transmission) pedal fully and crank 2. the gear selector lever and move the lever when engine is running. the engine. Do not press the accelerator to Drive (D) mode. No starter motor function when vehi- pedal when starting the engine. 3. cle is in running condition.

117 STARTING AND DRIVING

Gear Shifting and Driving Gear indication NOTE Manual Transmission For Automatic variants depress the brake pedal and shift into Drive (D) mode. Release the brake pedal and slowly press the accelerator. Current Gear Display

NOTE When shifting or starting off, do not race the engine. Racing the engine Current Gear number displayed on the can shorten engine life and affect DIS screen based on gear shift lever posi- smooth shifting. tion when clutch pedal is fully released.

NOTE WARNING ! The gearshift pattern is as shown on the gear lever knob. Gear shifting should al- When there is a failure in the system, Do not switch off the ignition while ways be done with clutch pedal pressed. instead of gear no ‘F’ shall be dis- driving. played. If ’F’ is displayed in the Gear If you switch off the ignition while driv- NOTE number position, take your vehicle to ing, safety-relevant functions are only authorized TATA service centre to get available with limitations, or not at all. Depress the clutch pedal fully while it repaired. This could affect the power steering shifting the gear. The reverse gear and the brake boosting effect. You should be engaged only when the ve- will require considerably more effort hicle is stationary. Wait for approx. 5 to steer and brake. There is a risk of seconds after declutching to ensure an accident. smooth engagement of the reverse gear.

118 STARTING AND DRIVING

Gear up/down recommender Automatic Transmission Reverse (R) This position puts the transmission in reverse gear when engaged in stationary Indicates to shift to next higher condition with brake pedal gear fully pressed. The selector shall never be moved into reverse while driving forward.

Neutral (N) The transmission is in Neu- tral position.

Indicates to shift to It enables the engine to start next lower gear Park (P) and operate without driving the vehicle. Use Park (P) position when starting the engine or park- Drive Mode (D) ing the vehicle. Apply the This position is for normal parking brake whenever the driving conditions for maxi- Gear Up/Down recommender shall rec- vehicle is to be parked. mum efficiency and fuel ommend the user to change the gears The selector lever must be engaged in economy. It should be used for better performance. Park (P) position only when the vehicle is as often as possible. stationary. If engaged while the vehicle is To move the selector to D mode; press the NOTE in motion it may severely damage the Shift lock button in the handle of the se- transmission. If the vehicle is in correct gear posi- lector lever and at the same time press the brake pedal fully. tion, the gear recommender shall not be shown.

119 STARTING AND DRIVING

Sport / Manual (S/M) Automatic transmission- manual This position allows the driver to switch to mode Sport mode or activate Manual mode to This Indicates the select gears like a manual gearbox. current gear engaged. Pressing the shift lever towards left side while in Drive mode will put the transmission in Sport mode.

The gear selector moves freely between the Sport (S) and Drive (D) positions. The vehicle will remain in Sport mode if the shifter is not moved at all. As soon as shifter is moved forward or backward, the ‘+’ For Upshifting in Manual mode NOTE Manual (M) mode is activated. Push the gearshift lever to the “+” direc-  Transmission tion and release it. Every time the lever is It is possible to shift from D mode to Sport Control Unit operated, upshifting takes place one step or Manual mode and vice versa at any may disallow at a time in the order of st > nd > rd > th time during driving. 1 2 3 4 incorrect manual shift command > 5th > 6th gear. To return to Sport mode after Manual by user and a message ‘Driver mode has been selected; move the selec- ‘-’ For Downshifting in Manual mode Control Shift denied’ is displayed on Instrument Cluster. tor lever to Drive mode (by tapping the Pull the gearshift lever to the “–” direction  In order to protect the engine, the lever towards right) and then back to and release it. Every time the lever is op- transmission will automatically Sport mode (by again tapping the lever to- erated, downshifting takes place in the or- wards left). upshift to prevent engine over-rev- der th > th > th > rd > nd > st gear. 6 5 4 3 2 1 ving OR downshift to prevent en- st If Manual mode is selected, 1 gear must gine stalling at certain specified be used for moving off from stationary engine rpm limits. condition.

120 STARTING AND DRIVING

Drive mode indicator Automatic Gear Shifter Lever Movement and Conditions Auto Mode Lever Position Movement Brake Pedal Driver Shift This display shows vehicle is in Auto drive mode and background shall be in Pressed White in color and 4x4 indi- P->>R cates the vehicle is in four-wheel drive mode. Pressed Sport Mode This display shows vehicle is N->>D Not required in Sport mode and the theme shall be in Red color and 4x2 indicates the vehi- Pressed cle is in two-wheel drive mode N->>R Manual Mode This display shows vehicle is in Manual mode and the theme shall be in blue color R->>P Not required and 4x2 indicates the vehicle is in two-wheel drive mode. Shifter Lever Knob Pressed

NOTE: For all other conditions no driver intervention required.

121 STARTING AND DRIVING

Transmission Overheating Transmission Fault  Always select Park mode and switch off the ignition before leaving the vehi- If transmission oil temperature increases cle. beyond safe working limit; instrument  Never select a forward gear while the cluster will display a warning message. vehicle is in rearward motion.  Do not rev the engine or allow it to run above normal idle speed, while selecting D or R or whilst the vehicle is sta- In the event that transmission develops a tionary with any gear selected. fault, a warning message will be displayed on instrument cluster. WARNING ! At that time, reduce the vehicle speed and Please drive cautiously to the nearest Do not allow the vehicle to remain stop the vehicle safely with engine run- TATA MOTORS authorized service centre stationary for any length of time, with ning and transmission in Park mode till or if unable to drive call Customer Support selector lever in Drive/Sport/Manual the message goes off. for help. mode and engine running. Always se- If the problem persists, please contact In some events of fault, only limited gears lect Park or Neutral if the engine is to TATA MOTORS Authorised Service Centre. may become available for use and a warn- remain idle for a prolonged period. ing message will be displayed in the in-

strument cluster.

Please visit TATA MOTORS Authorised Service Centre for help.

122 STARTING AND DRIVING

Braking After driving through water or washing the underside of the vehicle, test the brakes WARNING ! The distance needed to bring the vehicle while driving at a slow speed to see if they to a halt increases with the speed of the Do not shift to lower gear on a slip- have maintained their normal effective- pery road surface in an attempt to in- vehicle. Start applying brake anticipating ness. If the brakes are less effective than the distance and slow down gradually. crease the engine's braking effect, normal, dry them by repeatedly applying the drive wheels could lose their grip. the brakes while driving slowly until the There is an increased danger of skid- WARNING brakes have regained their normal effec- ! ding and accidents. Never use the brake pedal as a foot- tiveness. rest. Braking on downhill gradients Switching OFF the engine If you rest your foot on the brake pe- Turn the key to ‘ACC’ position to switch off dal while driving, the braking system On long and steep gradients, you must reduce the load on the brakes by shifting the engine. Before switching off the en- can overheat. This increases the gine, run the engine in idle condition for stopping distance and can even early to a lower gear. This allows you to take advantage of the engine braking ef- at least 30 seconds and then switch off. cause the braking system to fail. This will allow the engine oil to lubricate There is a risk of an accident. fect and helps avoid overheating and excessive wear of the brakes. the turbocharger, till its speed is fully re- Never depress the brake pedal and duced and also allow the unit to cool the accelerator pedal at the same down. time. NOTE If you have driven for a long time in heavy Use Hill Descent Control (if equipped) WARNING ! rain without braking, there may be a de- function for effective braking on downhill gradients. A quick burst on the accelerator be- layed reaction from the brakes when fore turning off the engine serves ab- braking for the first time. This may also oc- solutely no practical purpose, it cur after the vehicle has been washed. wastes fuel and is damaging espe- If brakes are wet, brake performance may cially to turbocharged engine. become poor and unpredictable.

123 STARTING AND DRIVING Applying parking brake Releasing parking brake WARNING ! When engine is running at high speed do not switch it off. This will lead to premature turbocharger bearing wear.

Parking Brake

To apply the parking brake, pull the lever To release it, pull the lever up slightly (1), (1) up fully. The parking brakes tell-tale illuminates on the instrument cluster. press the release button (2) and push the lever down (3). Parking brakes tell-tale on the instrument cluster will turn ‘OFF’ when the lever is fully released.

Parking brake lever is provided between WARNING ! the driver and co-driver seat on the floor If the parking brake has not been fully console. released when driving, the parking brake can:  Overheat and cause a fire  Lose its hold function.

124 STARTING AND DRIVING

There is a risk of fire and an accident. Vehicle parking Release the parking brake fully be- WARNING !  Park the vehicle in a safe place. Switch fore driving off. Always secure the vehicle correctly on the indicator signal before turning against rolling away. Otherwise, the to park. WARNING ! vehicle or its drivetrain could be dam-  Apply the parking brake. aged.  Ensure that all window glasses are For Automatic Transmission, Always keep the gear shift lever in closed and all lamps are turned off. Park Mode and apply the parking  Remove the key from the ignition WARNING ! brake properly before leaving the ve- switch and lock the vehicle. hicle. Use the Park mode along with Never leave children unsupervised in  Block the wheel if parked on a slope. Parking brake for holding the vehicle the parked vehicle. They could also on a gradient. operate the vehicle's equipment. NOTE There is a risk of an accident and in-

jury. NOTE When parking on a downhill gradient, place the gear lever in ‘Reverse’ posi- Apply the parking brake properly be- tion. While parking on uphill gradient, fore leaving the vehicle and release it place the gear lever in the ‘1st’ posi- before moving. tion.

NOTE Do not use parking brake for braking unless unavoidable circumstances like when service brake is not working properly. The braking distance is considerably longer and the wheels could lock. There is an increased danger of skidding and accidents.

125 STARTING AND DRIVING

126

DRIVER ASSIST

Electronic Stability Program (ESP) replacing tyres, always ensure to use (if equipped) only recommended tyre sizes. ESP monitors driving stability and traction. WARNING !s In case of an ESP system failure the If ESP detects that the vehicle is deviat- !! warning lamp will illuminate in in- ing from the direction desired by the f driver, one or more wheels are braked to strument cluster. In that case please pullover the vehicle to the side s of stabilize the vehicle. The engine output is road and switch off the ignition and also modified to keep the vehicle on the a restart. If the fault persists, your ESP desired course within physical limits. ESP f assists the driver when pulling away on system may not be working properly, take the vehicle carefully to the! wet or slippery roads. ESP can also stabi- nearest TATA MOTORS authorised lize the vehicle during braking. WARNING s service centre for repair. ! ESP Operation ESP is just a driving aid; it cannot enhance your vehicle’s stability in all Traction Control System (TCS)f During ESP intervention the following conditions and does not control your s actions may occur; Traction Control System helps limit wheel vehicle’s entire braking system. It is slip in acceleration on slippery surfacesa . still your responsibility to drive and  ESP indicator starts flashing. corner at reasonable speeds and f  A slight noise from ESP / ABS modu- Vehicle Dynamic Control (VDC) leave a sufficient margin of safety. ! lator may be heard, which is only the Always use precautionary measures VDC is an electronic control function to effect of brake control and indicates for safe driving by slowing down on improve vehicle driving behavior. The nothing unusual. curved, snowy or icy roads. VDC system can help to prevent under  Engine may not respond to accelera- and oversteer by reducing engine speed tor in the usual way. ESP and tyre sizes and applying the brakes individually on  Cruise control setting gets disabled. If you drive your vehicle with a non- specific wheels. specified tyres or wheel sizes, the ESP system may not work properly. When 128 DRIVER ASSIST

Roll over Mitigation (ROM) celerator pedal due to an unexpected emergency brake situation. By actively Sometimes when the driver tries to avoid pre-filling the brake-system the brake suddenly an obstacle or turns through a response time is reduced for an upcom- corner with high speed, the driver may ing braking. This results in a shorter lose the control and the vehicle tends to stopping distance. rollover. The main feature of the Roll over Mitiga- Engine Drag Torque Control (EDTC) tion function is the detection of a rollover While driving if the driver releases the critical situation and to prevent the vehi- accelerator abruptly or shifts down a cle rollover. This is done by active brake gear quickly, the braking effect of the interventions on selected wheels, there- engine may cause the wheels to skid. by reducing the forces that cause a roll- The Engine Drag Torque Control (EDC) HDC provides a smooth and controlled over situation. prevents the wheels from locking under hill descent by enabling the vehicle to the influence of engine braking to main- control the speed of each wheel. The Cornering Stability Control (CSC) tain directional stability and enhance system will automatically apply the ‘Corner stability Control’ supports/ stabi- safety. brakes to slow down to the desired vehi- lizes vehicle during partial braking on cle speed. Cruise control +/-buttons can curves by reducing pressure at required Hill Descent Control (HDC) adjust the speed to a comfortable level. inner wheel of the vehicle. (if equipped) HDC will be automatically disabled once the descent is complete and vehicle is on This helps to reduce probability of vehi- While driving down on a levelled road. HDC would not be activat- cle over steering during cornering. hill slope, activate the HDC feature by pressing ed if the vehicle speed is above 35 kmph while driving with HDC activated, If the Electronic Brake Pre-fill (EBP) the switch provided on the fascia. speed goes above 40 kmph, HDC goes The Electronic Brake Prefill (EBP) func- into monitoring mode and will get deac- tion reduces the air gap of the brake pad tivated automatically, once the speed and the brake disc. The function is trig- crosses 60 kmph. gered after a sudden release of the ac- 129 DRIVER ASSIST

The braking pressure built-up by the Torque - On - Demand (TOD) Trans- WARNING ! driver during the stop procedure is main- fer case (if equipped) HDC cannot take account of road, tained in the braking system by the HHC Torque-On-Demand is used for distrib- weather, traffic and tyre conditions. function. Braking pressure is released uting torque between the front and rear You are always responsible for keep- after few seconds. During the pressure axles. According to the driving conditions ing control of the vehicle and for as- hold period, the driver has enough time this system automatically and smoothly sessing whether the downhill gradi- to press the accelerator pedal to drive delivers two wheel/four-wheel drive op- ent can be managed. off. erations. In 4 x 4/Auto mode, whenever Hill Hold Control (HHC) (if equipped) The braking pressure is reduced as soon any slippage is detected in the rear as the system detects the driver’s inten- wheels (on icy roads, wet surfaces, etc.) sion to drive off. the torque is transferred to the front wheels by the TOD system. WARNING ! Using TOD system (if equipped) After a short time, hill hold control TOD System provides two operating posi- will no longer brake your vehicle and it could roll away. tions i.e. 4 x 2 Mode and 4 x 4/Auto mode. There is a risk of an accident and injury. Therefore, quickly move your To activate 4 x 2 mode, press foot from the brake pedal to the ac- the 4 x 2 switch provided on celerator pedal. fascia, the LED on the switch turns ON. In this mode, the engine power is sup- Hill Hold Control allows easy starting up plied to the rear wheels only. the hill without the risk of unwanted rolling backwards. It is activated automati- To activate 4 x 4/Auto mode, press 4 x 2 cally when driving off up-hill on an in- switch again, the LED on the switch turns clined surface after the driver has re- OFF. In this mode, the engine power is leased the brake pedal. 130 DRIVER ASSIST supplied to both front and rear wheels, Cruise Control (if equipped) which do not allow you to main- based on the driving conditions. tain a constant speed e.g. in Cruise control is meant to reduce driver heavy traffic or on winding roads fatigue, especially when travelling long WARNING !  on slippery road surfaces. Braking distances. The cruise control system or accelerating could cause the While changing over from 4 x 2 to allows you to program your vehicle to drive wheels to lose traction and 4 x 4/AUTO mode or vice-versa, maintain a constant/desired speed with- the vehicle could then skid make sure the vehicle speed is be- out operating the accelerator pedal.  when there is poor visibility, e.g. low 80 kmph. Use cruise control only if road and traffic due to fog, heavy rain or snow

conditions make it appropriate to main- If there is a change of drivers, advice NOTE tain a steady speed for a prolonged peri- the new driver of the speed stored. od. When TOD is in 4 x 4/Auto mode & Activate Cruise Control only in fol- Ignition switch is in ON position, you lowing gears and speeds will hear a slight noise from the axle NOTE connect mechanism. Similarly you If you fail to adapt suitable driving Gear Allowable Speed Range will hear same noise while changing skill for cruise control, it can neither (km/h) over from 4 x 2 to 4 x 4/Auto mode reduce the risk of an accident nor st No cruise control and vice-versa, which is normal. override the laws of physics. Cruise 1 control cannot take into account the 2nd No cruise control Activation/Deactivation of TOD in road, traffic and weather conditions. 3rd 30-110 Drive modes Cruise control is only an aid. You are responsible for the distance to the 4th 40-150 Drive Mode TOD (4x4) vehicle in front, for vehicle speed, for 5th 50-160 Auto ON braking in good time and for staying 6th 60-160 Comfort OFF in your lane.

Dynamic OFF Do not use cruise control:  in road and traffic conditions Rough Road ON 131 DRIVER ASSIST

Cruise Control Switch on Steering speed. The cruise control indicator on NOTE Wheel (If equipped) instrument cluster will turn ‘ON’.  Remove your foot from the accelera- Cruise control will not be deactivated tor pedal. if you depress the accelerator pedal. For example, if you accelerate briefly Once Cruise control is activated the vehi- to overtake, cruise control adjusts cle automatically maintains the stored the vehicle's speed to the last speed speed. stored after you have finished over- Changing the set cruise speed taking. The set cruise speed can be adjusted Deactivating cruise control (i.e. increased or decreased) using ‘+’ (to increase) or ‘-’ (to decrease) switches on There are several ways to deactivate steering wheel. The speed increases and cruise control: decreases by an interval of 2 kmph on a  Applying brake 1. Cruise control master switch. single press. The changed speed will be  Press deactivation switch on Steering 2. Cruise control deactivating switch. shown on the speedometer. Keeping the Wheel 3. Cruise resetting/Speed increasing switch pressed increases or decreases  Activation of ESP/ TCS system. switch. the speed continuously till the switch is 4. Cruise setting/Speed decreasing released. The set speed can also be in- Resuming the set cruise speed switch. creased by pressing the accelerator pe- Cruise speed can be resumed only if dal till the desired speed is achieved and cruise control is deactivated by depress- Setting cruise speed then pressing the ‘SET’ button. The set ing Brake Pedal. To resume the previous-  Press the cruise control master speed can also be decreased by pressing ly set cruise speed, accelerate the vehi- switch on steering wheel. the brake pedal (The cruise indicator will cle to a speed above approx. 32 kmph  Accelerate the vehicle to the desired turn OFF) and slowing down to desired and press reset (‘RES’) switch. speed. speed and then pressing the ‘SET’ button  Press the ‘SET’ button on steering (The cruise control indicator will turn ‘ON’ wheel switch to set the desired cruise again). 132 DRIVER ASSIST

WARNING ! WARNING ! While travelling on a slope (e.g. hill), While cleaning front windshield glass Cruise Control may not be able to from inside, ensure that solvent maintain the SET speed and may be should not enter in Rain-Light Sensor deactivated. Cruise Control can be otherwise it will be damaged or mal- reactivated using ‘SET / RES’ switch function. provided on steering wheel. In such cases use accelerator for increasing Auto front wipe (if equipped) speed (when going up) and brakes to decrease (when going down). If

brakes are used Cruise Control will be turned off. The wiper stalk will also provide five rain sensitivity/frequency settings to allow Rain & Light Sensor (if equipped) you to select the sensitivity of the auto wipe system, The wipe sensitivity can be altered with the help of intermittent wipe rotary switch. P5 is the lowest wiper speed and P1 the highest wiper speed mode.

The rain sensor automatically operates your vehicle’s wipers when it detects raindrops falling on the windscreen. The Auto front wipe gets enabled only when you keep the left wiper stalk in ‘AUTO’

position and ignition is ‘ON’.

133 DRIVER ASSIST

Automatic Headlamp mode (if equipped) NOTE In case of loss of signal from the Rain and Light sensor, the low beam and parking lights will turn ‘ON’ automatically. Also user can operate manual high beam through combi switch.

WARNING !

The automatic headlamp feature is These will vary the amount of rain that only an aid. The driver is responsible must be detected by the rain light sensor for the vehicle's lighting at all times. before the auto wipe system turns ‘ON’. Automatic Headlamp mode is activated if The speed of wiping will be varied de- Master Light switch is in auto mode. pending on the intensity / frequency of rain falling. The light sensor automatically switches ‘ON’ or ‘OFF’ the head lamps whenever it NOTE senses the surrounding light intensity. (e.g. when the vehicle enters a tunnel or In case of loss of signal from the Rain and Light sensor, the wipers when it is twilight). will sweep in different interval mode as per the sensitivity you select or, till a valid signal is received from the Rain and Light sensor.

134 DRIVER ASSIST

Reverse Park Assist with Camera Deactivation WARNING ! (if equipped) s System will deactivate, if reverse gear is Make sure that you always reverse Rear View Camera is a visual reverse ! disengaged, or park assist button is the vehicle slowly. guiding system, which will guide you f pressed while you are reversing. Never reverse while looking only at s Color Guidelines the display screen. You should al- The rear view camera is only an aid. It is ways check behind and around thea Guidelines will help you to rightly find the not a replacement for your attention to vehicle surroundings while reversing.f sufficient parking place, helps you to your immediate surroundings. You are Always make sure your intended! keep the vehicle straight, rear object always responsible for safe maneuvering path is clear. If you reverse while proximity indication etc., and parking. When maneuvering or park- looking only at the display screen, ing, make sure that there are no per- Guidelines lengths and widths are just you may hit a vehicle, pedestrian, greater than the vehicle length and width sons, animals or objects in the area in bicyclist, child, pet or other object which you are maneuvering. respectively. So with the guidelines, you resulting in injury or death. can park the vehicle by checking the Activation sufficiency of the parking place. You can activate rear view camera by:

 Reverse gear Park assist feature will automatically

start functioning once you engage the reverse gear.

 Infotainment system touch screen Go to ‘Set Up -> Vehicle Setup -> Park Assist -> Enable Park Assist ‘.

135 DRIVER ASSIST

Understanding Guidelines Indication Cyan line WARNING ! Once the rear view camera is activated, While reverse parking, Cyan line helps s you can see, colored guide lines on the you to identify the sufficient parking The area displayed by the rear view! camera is limited. The camera does screen as shown in the images. place and to align the vehicle straight. f Cyan line is used static & dynamic over- not display objects that are close to lay. or below the bumper, underneaths the vehicle, or objects out of thea Green Line camera’s field of view. The area displayed on the screen may vary ac-f Indicates, if rear object is in this colored ! zone, you have to be cautious. Still you cording to vehicle orientation or road can go backward safely. conditions.

Yellow Line Using camera Indicates, if rear objects are in this col- 1. As the camera is water proof con- "Static Guidelines - Colored Guide lines ored zone, you have to take utmost care. struction, do not detach, disassemble are always static" However, objects fall in this zone, may or modify in any manner from the ac- not hit vehicle. tual position. This will show in correct visual information in display. Red Line 2. Don’t use camera when tailgate is Indicates, if rear objects are in this col- open. If back door is open, visual in- ored zone, you have to stop the vehicle. formation may not be the actual rear And not allowed to go backward. If you view of the vehicle. still go backward, your vehicle will hit the object. 3. When the camera is operated under fluorescent lights, sodium light or mercury light etc., illuminated areas "Dynamic Guidelines - Colored Guide on the lens may appear to flicker in lines will move as per steering wheel the display. rotation (Applicable to ESP variants only). 136 DRIVER ASSIST Do not attach any advertisement or Do not apply heavy force on lens, 4. 6.  The camera used in the vehicle, styling or any kind of stickers on top while cleaning. may not reproduce the same col- of camera. If this happens, camera Do not remove mud, snow on the or of the real object. cannot provide you the visual image. 7. camera lens using stick or hard ma-  The rear view camera does not 5. Do not add any accessory, which will terial. Use normal water and soft obstruct camera field of view. cloth. display objects that are close to or below the bumper, underneath Cleaning camera the vehicle, or objects out of the WARNING ! camera’s field of view. The area Due to environmental reasons, dust, s 1. displayed on the screen may vary mud or fog may accumulate on the  The camera uses fish eye lens. ! according to vehicle orientation camera lens. So regularly clean the So the size of the objects or dis- f or road conditions. camera lens. tance from the objects that appear in the display may differs  In case of damage of the rear 2. Use water to clean the camera lens. from the actual size and distanc- a portion of the vehicle, camera Do not use extreme cold or hot water. es. Rapid changes in temperature may f position may change. Which brittle the camera lens.  In low light conditions, the screen! causes wrong visual information may darken or image may appear on display. In case of damage, 3. Wipe the camera lens with soft cloth. faint. make sure that, camera is fitted properly at the intended location. Do not use hard cloth or material to 4.  If the tire sizes are changed, the wipe the camera lens. This will cause position of the fixed guidelines  In case of uneven road conditions scratches on the camera, and leads displayed on the screen may or up-hill or down-hill conditions, to deteriorated visual image on the change. do not depend on rear view cam- display. era park aid.  During rainy conditions, image 5. Do not apply organic solvent, car wax, may get obscured. In such condi-  Do not apply any kind of force on window cleaner or glass coat to clean tions, do not depend on camera the camera. the camera. If this is applied, wipe it view. off as soon as possible.

137 DRIVER ASSIST

Ultrasonic Reverse Park Assist Distance Visual Audible 2. Reverse Park Assist (if equipped) range from Info. Info. Switch Bumper By pressing the ‘Reverse Park Assist Ultrasonic Reverse Park Assist system (in cm) will assist you to park your vehicle safely Switch’ on the fascia, the feature gets when in reverse gear mode. It provides Continuous activated. Once activated yellow LED will 0-60 Red Zone audio and visual information through the beep glow until the feature is deactivated. vehicles infotainment system. Yellow LED Indications 61-100 Fast beep Zone a) On start of ignition, if the LED turns ‘ON’ for a second, then Reverse Park Green 101-150 Slow beep Assist system is healthy. Zone

b) On start of ignition, if the LED turns ‘ON’ and ‘OFF’ 10 times, then Reverse WARNING ! Park Assist system is unhealthy. Contact s a TATA MOTORS authorised service cen- cm obstacle detection perfor- 0-25 ! tre to resolve the problem. mance is not guaranteed due to ul-

trasonic sensor technology limita-f There are 4 ultrasonic sensors placed on tion. s the rear bumper of the vehicle. Once the a system is activated, the sensors will de- Operation: f tect the proximity of an obstacle approx- Activation- There are ways to activate 3 imately 0 cm to 150 cm from the bumper, the reverse park assist. ! and this information would be displayed on the vehicles infotainment system. 1. Reverse gear

Park assist feature will automatically start functioning once you engage reverse gear.

138 DRIVER ASSIST

Deactivation: Limitations Following table indicates the deactivation methods of Reverse Park Assist System. Reverse Park Assist system is not a collision avoiding system. It is solely the driver’s responsibility to park the vehicle safe- Deactivated by ly.

Reverse Park Assist Music System user Reverse Park Assist feature works on ultra

Gear Button interface X button sound echo technology, due to which per- Activated by formance is not guaranteed in following Reverse Gear ✓ ✓ ✓ scenarios:  If the object has a sharp edge surface, ✖ ✓ ✓ Park Assist Button where surface may divert echoes from sensor reception.  If object is mesh fence made up of thin Music System user ✖ ✓ ✓ wires, where echoes can’t be given by interface the surface.

 Fast moving objects passes in the sensor field of detection, where echoes are NOTE not processed by the system.  Turning the ignition ‘OFF’ while the Park assist feature is running would dis-  If object is made/covered by foam or able the feature. sponge or snow where ultrasonic sound signals are absorbed.  If reverse gear is already engaged before Ignition ‘ON’ Park Assist will start automatically after Ignition ‘ON’.  Sensors covered by mud or external material, by which ultrasonic signals are either not transmitted or received properly.

139 DRIVER ASSIST There might be blind spot in Park Assist field of detection close to the rear bump- Preventive maintenance er, where the object has been detected 1. Regularly clean sensors located on once in any of the zones, may go out of the bumper. Use smooth cloth or ma- the sensor’s field of detection later. In terial which can’t make any scratch these cases, smaller objects like flower on the sensor. Don’t apply heavy pots, kerb stones, pets or children may force while cleaning. not be detected in Yellow or Red warning 2. Do not flush water on sensors with zones. It’s solely driver’s responsibility to heavy pressure. This will damage park the vehicle safely. It is highly rec- sensor. ommended to verify through rear/side 3. Do not apply styling stickers or any mirrors of the surroundings before do the material which will stick on the sen- reverse parking. sors. This will degrade park assist performance. WARNING ! 4. Do not fit any objects like foot rest or s number plate which will cover the Due to any reason, If sensors come ! sensor and obstruct its field of detec- out side of bumper or lost its intend- tion. ed fitment position, please contactf TATA MOTORS authorised services centre for rectification. a f !

140 DRIVER ASSIST

Audio Settings (if equipped) sist warning tone sounds louder than immediately for repeated engage- media tone when park assist is active. ments/disengagements of reverse gear.

Park Assist Tone You can configure this delay time period by the following sequence of operations,

Volume Setting Go to ‘Set Up -> Vehicle Setup -> Park Assist -> Park Assist Volume ->Park As- You can select 3 different types of Park sist Volume’. Assist tones. To change any tone, you ‘Set Up -> Vehicle Setup -> Park Assist -> have to follow this sequence of opera- Park Assist Delay Timer’. Increase or decrease volume by tapping tions, ⊖ or ⊕ symbols on the infotainment Fault Indications music system touch screen. ‘Set Up -> Vehicle Setup -> Park Assist -> In case of park assist fault or malfunc- Park Assist Volume ->Park Assist Volume tion, following screens may appear on Mix With Audio -> Park Assist Tone’. the infotainment music system. By default, Park Assist volume is mixed with infotainment system audio. ‘Mix Park Assist Delay Timer Critical Fault with Audio’ option allows you to enjoy If Park Assist system is deactivated by Reasons for this fault might be music even when park assist is active. ‘Reverse Gear’, it will take certain con- With this option, Park Assist warning figurable time period to go to previous  Park Assist Controller failure tone and media tone are smartly mixed infotainment screen. This is to ensure  Sensor malfunction together in such a manner that park as- that, Pak Assist should not switch off  Connection loss 141 DRIVER ASSIST

WARNING !s If you see above screen on Infotain-! ment music system display, please contact TATA MOTORS authorisedf service centre for rectification. s a f 142 !

DRIVE MODES

Drive Modes (if equipped) Drive Mode Selection Switch Auto - Drive Modes is an innovative feature A Driver control switch is provided on It is the default mode. through which user can choose the vehi- dashboard fascia for activation. Vehicle will always be in cle dynamics as per driving requirements Auto mode whenever ig- for comfort and safe drive. nition is switched ‘ON’. Auto Mode is most suit- Auto, Comfort, Dynamic and Rough Road able for highway drive mode are provided depending on the ve- when high performance hicle requirements. is desired. This display shows vehicle is in Auto drive mode and NOTE theme shall be in White in color and 4x4 The Drive mode is only applicable for indicates the vehicle is in four-wheel drive Manual Transmission. mode. – Comfort There are two types of switches available Rotate the selector based on the vehicle features and variant. knob to Comfort mode. 3 Mode - Auto, Comfort, Rough Road (Ve- This mode is recom- hicle fitted with ABS) mended for city or slow moving traffic condi- 4 Mode - Auto, Comfort, Dynamic and tions as it minimizes Rough Road (Vehicle fitted with ESP) sudden accelerations and helps have better drive control. This also helps to enhance fuel economy. Comfort mode can

also be used on highways for a relaxed driving. This display shows vehicle is in Comfort drive mode and theme shall be in

144 DRIVE MODES

Cyan in color and 4x2 indicates the vehi- in color and 4x4 indicates the vehicle is in Drive Mode Functionality cle is in two-wheel drive four-wheel drive mode. mode. Welcome Strategy The Welcome strategy shall come for 3 (if equipped) NOTE Dynamic - sec. when the Key is inserted and in IGN - Rotate the selector  The TOD mode shall be displayed knob to Dynamic mode. ON position, All Drive mode LED’s shall only in XT (4X4) variant. light up with white colour followed by Am- This mode is more suita-  If no change in the mode, only Auto ble for aggressive and ber for 3 sec. After 3 sec. the AUTO mode mode is observed, take your vehicle shall be selected as a default Drive mode sporty driving style. En- to authorized TATA service center. hanced stability control and full power will in every ignition cycle. offer to perform extreme maneuvers NOTE safely. Select the Drive mode approximately This display shows vehicle is in Dynamic after 6 sec from the IGN is turned ON drive mode and theme shall be in Red in as an initialization. color and 4x2 indicates the vehicle is in two-wheel drive mode. Drive Mode Selection The default mode in every Ignition ON - Rotate Rough Road shall be AUTO mode, User can select the the selector knob to Drive mode by rotating the Drive mode Rough road mode. It op- switch in clockwise or anticlockwise. timizes vehicle behavior for driving over rough road to avoid wheel NOTE locking during limited User has to hold the Drive mode surface contact due to switch in desired mode more than 1 frequent wheel up and down travels. This sec for proper system behavior on the display shows vehicle is in Rough Road user selected mode. drive mode and theme shall be in Yellow

145 DRIVE MODES

1) AUTO to COMFORT mode WARNING ! When the User is selecting the Drive mode from AUTO to COM- FORT, the mode change progress shall be displayed by blinking If any failure in the system, all four / three mode shall be TOD mode 4X2 in the Instrument cluster and the Drive mode” illuminated on the Drive control switch and only the AUTO COMFORT “shall be POP UP for 3 sec. in the center of the dis- mode is available to user, take your vehicle to TATA author- play, after 3 sec. the current gear number shall be displayed in ized service station to get it repaired. the center of the display and Drive mode shall be displayed in the right bottom of the display. 2) AUTO to ROUGH ROAD mode Pop Up for 3 sec After 3 sec When the User is selecting the Drive mode from AUTO to ROUGH ROAD mode, the mode change progress shall be completed approximately 1 sec and the Drive mode” ROUGH ROAD “shall be POP UP for 3 sec. in the center of the display, after 3 sec. the current gear no shall be displayed in the center of the display and Drive mode shall be displayed in the right bottom of the display.

Pop Up for 3 sec After 3 sec

NOTE When TOD mode (4X4 or 4X2) is blinking on the Instrument Cluster display, the user is not allowed to change the Drive mode. The blinking indicates that the already user selected mode transition in progress.

146 DRIVE MODES

3) COMFORT to DYNAMIC mode NOTE When the User is selecting the Drive mode from COMFORT to DYNAMIC mode, the mode change progress shall be completed approximately 1 sec and the Drive mode “DYNAMIC The user selected mode shall be illu- “shall be POP UP for 3 sec. in the center of the display, after 3 sec the current gear no minated in AMBER color shall be displayed in the center of the display and Drive mode shall be displayed in the Drive Control Shift Denied right bottom of the display. When drive mode changes in progress and again the user has

changed the Drive mode, the following message” Drive Control

Shift Denied” shall be displayed in the Instru- ment cluster for max 3 seconds and there Vehicle applicability: XT (without TOD) shall not be When the user is selecting the Drive mode from AUTO to COMFORT the selected Drive mode shall be POP UP in the Instrument cluster and the Drive mode shall be POP UP for any change in the Drive mode, the exist- max 3 seconds in the center of the display within approximately after 1 sec, after 3sec ing user selected drive mode shall be con- the current gear no shall be displayed in the center of the display and Drive mode shall tinued. be displayed in the right bottom of the display. NOTE

Wait for earlier mode transition to complete to change the drive mode.

147 DRIVE MODES

Drive Control System Fault When there is a failure in the system all three/four mode symbols on switch shall be illuminated and the following message “Drive Control System Fault “shall be displayed in the Instrument cluster for 3 seconds.

NOTE During the failure in the system all the drive modes symbols shall be illuminated in AMBER color, only AUTO mode is available and no selection is possible or allowed during this situation. Take your vehicle to TATA authorized service station to get it repaired.

148

EMERGENCY AND BREAKDOWN ASSISTANCE

Emergency Equipments Advance warning triangle The reflecting side of the triangle should face the oncoming traffic and it should be You should be familiar with the location of free from any obstacles. the emergency equipments provided in the vehicle and how to use it. Remove the advance warning triangle carefully from the bag and assemble. Re- Check these equipments periodically and fer instructions given on the bag. ensure that they are in proper working condition and stowed at their locations.

First aid kit The first aid kit is kept inside the glove box. The kit contains items that can be used in case of minor injuries only. Advance warning triangle is kept below the 3rd row seat. NOTE Use advance warning triangle to warn the Check contents of the first aid kit pe- approaching traffic in case of vehicle riodically and replenish consumed or break-down or during emergency, where expired items. your vehicle could become a potential traffic hazard. NOTE After using the warning triangle tie it Press hazard warning switch, all turn sig- firmly and keep it inside the bag to nal lamps will start blinking. avoid rattling noise.

Keep the warning triangle at an approximate distance of 50-150m behind your vehicle in the same lane of traffic.

150 EMERGENCY AND BREAKDOWN ASSISTANCE

Tool kit Tools are provided with your vehicle: simultaneously. To turn it off, press the Open the tail gate and lift the lid of the 1. Jack switch again. storage box to access the tool kit. Notch 2. Jack handle Use the hazard warning to warn the traffic is provided on lid for convenient lifting. 3. Wheel spanner during emergency parking or when your 4. Tow hook vehicle could otherwise become a traffic 5. Reversible screw driver hazard. 6. Extension rod for spare wheel removal The hazard warning lamps can operate NOTE even if the ignition is switched off. The tool kit items should be properly stored/secured when not in use.

Hazard warning switch

Press the hazard warning switch to activate the hazard warning. All turn signal lamps and their tell tales will start flashing 151 EMERGENCY AND BREAKDOWN ASSISTANCE

Inertia switch (If equipped) WARNING ! Inertia switch which will trigger if the vehi- After resetting the switch and before cle is brought to an abrupt halt, mostly resuming driving, check for any dam- during a collision. Normal driving or sud- age to the body or check if any part is den braking will not trigger the inertia hanging loose. Also, after turning ON switch. the ignition, ensure that no faults are When the Inertia switch is triggered: displayed on the instrument cluster.

 All doors will be unlocked.  All turn indicators will flash.  All roof lamps will be turned on.  Fuel supply will be cut off.  Access the Inertia switch through cut- out (opening) and press it. To undo the above affects you have to reset the Inertia switch. Inertia switch is located below glove box on left side of front passenger foot well. It can be accessed through cut out provided on trim. To Reset the Inertia switch:  Open the front passenger side door and reach out in the area as indicated.

Inertia switch location

152 EMERGENCY AND BREAKDOWN ASSISTANCE

In Case of Flat Tyre WARNING !  Reduce vehicle speed gradually, with- If you drive with a flat tyre, there is a out making any sudden steering or risk of the following hazards: braking maneuvers. Pay attention to the traffic conditions as you do so.  A flat tyre affects the ability to steer or brake the vehicle.  Switch on the hazard warning lamps.  Stop the vehicle on solid, non-slippery  You could lose control of the vehicle. and level ground, as far away as pos- Continued driving with a flat tyre will sible from traffic. permanently damage the tyre and  If possible, bring the front wheels into cause excessive heat buildup and the straight-ahead position. possibly a fire. There is a risk of an accident.  Secure vehicle against rolling away.  Remove the window cover provided on  Set the parking brake firmly and shift Spare wheel removal the rear bumper to access the spare into “R” (Reverse) gear (Manual Trans- wheel bracket. mission) if vehicle is on level ground.  For automatic transmission, set the parking brake firmly and shift to “P” (Park) mode.  Switch off the engine.  Evacuate the occupants from vehicle and locate them at safe place away from traffic.  Keep advance warning triangle at a suitable distance (50-150m) behind the vehicle to indicate breakdown.  Open the tail gate and storage box lid,  Close all the doors. remove the anti-theft rubber lock. 153 EMERGENCY AND BREAKDOWN ASSISTANCE

 Insert the spare wheel handle with ex- Following precautions are to be tension through the window. taken when temporary spare wheel is fitted on the vehicle.

WARNING !  Drive the shortest possible distances. The temporary spare wheel should be exchanged for a normal wheel as soon as possible. The temporary spare wheel is designed for a short period of use only.  “120 km/h” or “75mph” is the  Remove the holding bracket from the maximum speed you are permitted spare wheel and get the spare wheel to drive with this tyre. separated.  Rotate the handle counter-clockwise Never drive faster than 120 km/h to lower the spare wheel till it rests on (75 mph). Do not accelerate the ground. quickly, brake suddenly or drive at high speed through bends.  After fitting the temporary spare wheel, the tyre pressure must be checked as soon as possible.  Recommended tyre pressure is 34 psi (2.3 bar) for temporary spare wheel.  Snow chains cannot be used on the temporary spare wheel.

154 EMERGENCY AND BREAKDOWN ASSISTANCE

On temporary spare wheel following Changing flat tyre WARNING ! sticker is provided for identification.  Loosen the nuts (as indicated) on the  Never use more than one tempo- wheel in cross-wise sequence. Do not rary spare wheel. unscrew the bolts completely before  Do not drive through an automatic jacking the vehicle. car wash.  Never use a temporary spare tyre if it is damaged or worn down to the tread wear indicators.  The ground clearance of your vehicle may be reduced. Take care when parking next to curb.  The temporary spare should not be installed on the front axle if the vehicle must be driven in snow or on ice.  Do not tow whilst the temporary spare wheel is installed.  Open the strap and unscrew the wing nuts to take out jack from the tool kit. NOTE  Make sure that the jack is placed pre- Your vehicle may exhibit some unu- cisely beneath the jacking point. Posi- sual driving characteristics when fit- tion the jack vertically and raise it by ted with temporary spare wheel. turning the jack handle clockwise until the jack sits completely on jacking point and the base of the jack lies evenly on the ground.

155 EMERGENCY AND BREAKDOWN ASSISTANCE

 The jacking points are indicated on ground. Do not raise the vehicle more each nut by hand until the wheel is se- the vehicle (Refer jacking point loca- than necessary. curely seated on the hub. tions).  Lower the jack completely, tighten the wheel nuts one by one in cross-wise sequence using wheel spanner.

WARNING ! If you tighten the wheel nuts when the vehicle is raised, the jack could tip over. There is a risk of injury. Only tighten the wheel nuts when the vehicle is on the ground.

 Remove wheel-mounting nuts and WARNING ! Jacking point locations take out the flat tyre. The wheels could work loose if the wheel nuts are not tightened to the WARNING ! NOTE specified tightening torque. There is a If you do not position the jack cor- Do not place wheel nuts in sand or on risk of accident. rectly at the appropriate jacking point a dirty surface. Do not apply oil or Have the tightening torque immedi- of the vehicle, the jack could tip over grease on it. ately checked at an authorized work- with the vehicle raised. There is a risk shop after a wheel is changed. of injury.  Roll the spare wheel into position and align the holes in the wheel studs.  Restore all the tools and jack at their respective location.  Continue to raise the jack slowly and  Install wheel nuts with their cone smoothly until the tyre clears the shaped end facing the wheel. Tighten  Place the flat tyre at spare wheel location.

156 EMERGENCY AND BREAKDOWN ASSISTANCE

Jump Lead Starting NOTE Never place your hands and feet or lie under the raised vehicle when it is Use only a battery of same rating & capac- Check and correct the tyre pressure supported by the jack. and wheel nuts tightness of the ity to jump start your vehicle. Position the changed wheel at nearest authorised Never run the engine when the vehi- booster battery close to your vehicle so service station. cle is supported by the jack and never that the jump leads will reach both batter- Get the flat tyre repaired at the earli- allow passengers to remain in the ve- ies. est. hicle. When using a battery of another vehicle, Never open or close a door or the do not let the vehicles touch.

trunk lid when the vehicle is raised. Apply the parking brake firmly and keep NOTE the gearshift lever in neutral. The jack is designed only to raise and NOTE Turn off all vehicle accessories, except hold the vehicle for a short time while The jack should be used only to those necessary for safety like hazard a wheel is being changed. It is not change wheels. It is important to read warning lamps. suitable for performing maintenance the jacking instructions in this sec- work under the vehicle. tion before attempting to use the Use the jack on level, hard ground. jack. Avoid changing the wheel on uphill and downhill slopes. Before raising the vehicle, secure it from rolling away by applying the parking brake. Do not use wooden blocks or similar objects as a jack underlay.

157 EMERGENCY AND BREAKDOWN ASSISTANCE Make jump lead connections as follows: battery. There is a risk of an explo- NOTE sion. Particularly avoid fire, open  Connect one end of the first jump lead Do not disconnect the discharged bat- flames, creating sparks and smoking. to the positive (+) terminal of the dis- tery from the vehicle. Ensure there is sufficient ventilation charged battery.

while charging and jump-starting. Do  Connect the other end to the positive not lean over the battery. (+) terminal of the booster battery. WARNING !  Connect one end of the second jump Make sure that the positive terminal lead to the negative (–) terminal of the Never connect the jump lead directly of a connected battery does not come booster battery. to the negative (–) terminal of the dis- into contact with vehicle parts. Never charged battery. This may lead to an place metal objects or tools on a bat-  Make the final connection (other end explosion. tery. of the negative terminal) to an un- painted, heavy metal part (i.e. engine It is important that you observe the mounting stud/nut) of the vehicle of described order of the battery termi- WARNING discharged battery. ! nals when connecting and discon-  Start the engine of the vehicle with the Do not allow battery electrolyte to necting a battery. If you are in doubt, discharged battery. come in contact with eyes, skin, fab- seek assistance from qualified spe-  Before disconnecting the jumper ca- rics or painted surfaces. The fluid cialist workshop. contains acid which can cause injury bles, let the engine run for several Never connect or disconnect the bat- minutes. and severe damage. Wear protective apparel. Do not inhale any battery tery terminals while the engine is run-  If the booster battery you are using is gases. Keep children away from bat- ning. fitted to another vehicle, start the en- teries. Wash battery acid immediately gine of the vehicle with the booster with water and seek medical atten- battery. Run the engine at moderate tion. speed.  Remove the jump leads in the exact During charging and jump-starting, reverse order in which you connected explosive gases can escape from the them.

158 EMERGENCY AND BREAKDOWN ASSISTANCE

Towing Installing the Tow hook WARNING ! When towing the break down vehicle, cer-  Open the tailgate and remove the tow tain precautions and procedures must be  Never get under your vehicle after hook from the tool kit. it has been lifted by a tow truck. taken to prevent damage to the vehicle  (For front towing) Open the tow hook and/or components. Failure to use stand-  For towing a vehicle, the best way cover provided on the front bumper ard towing precautionary measures when is to use a wrecker. Alternatively grille by pressing and pulling it. lifting or towing a break down vehicle use a rigid tow bar. could result in an unsafe operating condi-  Switch 'ON' the hazard warning in- tion. dicators of both the vehicles to warn other road users. To ensure proper towing and to prevent Limit the speed to 20-30 kmph. accidental damage to your vehicle, take  help of a TATA MOTORS authorized dealer  In case of brake failure, use the or a commercial tow-truck service. parking brake to control the vehicle.  Only secure the tow rope or tow NOTE bar at the towing eyes. Otherwise, Make sure that the parking brake is the vehicle could be damaged. released; vehicle in neutral gear position and steering wheel is unlocked. When towing, pull away slowly and The power steering functions only smoothly. If the tractive power is too Front tow hook high, the vehicles could be damaged. when engine is running. Hence, during  Engage the tow hook and rotate in towing the steering efforts will be clockwise direction to tighten. more.  After towing, remove the towing hook and fit the cover properly.  Place the towing hook in the vehicle tool kit.

159 EMERGENCY AND BREAKDOWN ASSISTANCE

WARNING !  Never tow your vehicle with the front wheels on the ground or four wheels on the ground (forward or backward), as this may cause serious damage to the transmission.  When towing with the rear wheels on the ground or on towing dollies, place the ignition switch in the ‘ACC’ or ‘ON’ position, and secure Rear tow hook the steering wheel in the straight- ahead position with a rope or sim- Recommended towing ilar device. We recommend that your vehicle be towed with the driving wheels off the ground or place the vehicle on a flatbed NOTE truck as shown. If it is not possible to shift the transmission or start the engine or if the wheels are jammed, the vehicle must WARNING ! NOTE be transported on flatbed truck, Use flatbed tow truck for towing vehi- When towing, pull away slowly and where the vehicle is loaded into the cles with 4x4 / Automatic transmis- smoothly. If the tractive power is too back of a truck. sion as this may cause serious dam- high, the vehicles could be damaged. age to the transmission.

160 EMERGENCY AND BREAKDOWN ASSISTANCE

Fuses Checking and replacing fuses The vehicles electrical circuits have fuses If any electrical unit in your vehicle is not to protect the wiring from short circuits or functioning, check the fuses first. sustained overload. Please follow the steps below that will Your vehicle has fuse boxes at three loca- guide you to check and replace them. tions.  Apply parking brake  Switch off all electrical consumers.  Turn the ignition key to the 'LOCK' position.  In the fuse box, identify the defective Fuse location- Engine and battery fuse from its melted wire.

1. Engine Compartment Fuse Box 2. Battery Mounted Fuse Box 3. Cabin Compartment Fuse Box

Fuse location- Cabin compartment  Remove the blown fuse by “fuse

puller”. The fuse puller and spare

161 EMERGENCY AND BREAKDOWN ASSISTANCE fuses are provided in the engine com- a TATA MOTORS authorized service partment fuse box. centre immediately.

WARNING ! If you manipulate or bridge a faulty fuse or if you replace it with a fuse with a higher amperage, the electric cables could be overloaded. This could result in a fire. There is a risk of an accident and injury. Always replace faulty fuses with the specified new fuses having the correct amperage.

Engine compartment fuse box

 Blown fuses must be replaced with fuses of same rating, which you can recognize by color and value.

NOTE Always ensure that the spare fuses are replenished.

 If a newly inserted fuse also blows, have the cause traced and rectified at

162 EMERGENCY AND BREAKDOWN ASSISTANCE

Battery Mounted Fuse And Relay Box Fuse Function Rating No. (A) MF1 STARTER MOTOR 500A MF2 ALTERNATOR 150A MF3 COCKPIT 60A MF4 ABS/ESP 40A MF5 IGNITION 60A MF6 MF7 COOLING FAN 1 30A

NOTE The fuse box layouts are provided for reference purpose only. Please refer the sticker provided inside the fuse box cover.

163 EMERGENCY AND BREAKDOWN ASSISTANCE

1. Engine Compartment Fuse and Relay Box

Fuse No. Function Rating (A) F05 ACCESSORIES 60A F09 COOLING FAN II 40A F10 HEATED REAR SCREEN 30A F11 TOD 20A F12 HVAC 40A F13 ABS/ESP 25A F14 AIRCON 15A F15 EMS 30A F16 STARTER 40A F17 NOT USED F18 HEAD LAMP LOW RH 10A F18A HEAD LAMP LOW LH 10A F19 HEAD LAMP HIGH RH 10A F19A HEAD LAMP HIGH LH 10A F20 NOT USED HORN F21 15A F22 NOT USED F23 REAR WIPER 15A F24 GLOW PLUG I 40A NOTE F25 NOT USED The fuse box layouts are provided F26 GLOW PLUG II 40A for reference purpose only. Please F27 NOT USED refer the sticker provided inside the F28 HAS BATT. 30A fuse box cover. F31 AFTER MARKET POWER SOCKET 10A

F32 AT BATT. 15A

164 EMERGENCY AND BREAKDOWN ASSISTANCE

3. Cabin Wiring Harness Fuses & Relay Box Fuse Function Rating (A) No. F1 W/W FR LH BATT. 25A F2 DRIVE MODE SW BATT 5A F3 BCM 1 BATT. 15A F4 AFTER MARKET POWER SOCKET BATT. 10A F5 CDL BATT. 15A F6 DIAGNOSTIC/ INERTIA SW BATT. 5A F7 HEATED REAR SCREEN (HRW) 25A F8 MIRROR HEATER 10A F9 ITS BATT 15A F10 - - F11 INSTRUMENT CLUSTER BATT. 10A F12 IMMOBILIZER & KEY IN BATT. 5A F13 BCM 2 BATT. 15A F14 W/W RR RH BATT. 25A F15 W/W RR LH BATT. 25A F16 TRANSIT / INFOTAINMENT BATT. 15A F17 HVAC BATT. 5A F18 BCM 3 BATT. 15A F19 BRAKE SW BATT. 5A F20 W/W FR RH BATT. 25A F21 ACC RELAY COIL 5A F22 POWER SOCKET III ACC 15A F23 USB CHARGER ACC 5A F24 RR BLOWER SW IGN 5A

F25 FR,RR WIPER IGN. 25A 165 EMERGENCY AND BREAKDOWN ASSISTANCE

Fuse Function Rating (A) No. NOTE F26 FR HVAC IGN. 10A The fuse box layouts are provided for reference purpose only. F27 GSL AT/ BUZZER IGN 5A Please refer the sticker provided inside the fuse box cover. F28 PDC,TOD,INT WIPE, DIAG, DCS, ITS IGN 5A TOD FR AXLE IGN. 10A F29 F30 REV SW/LAMP MT/AT IGN 5A F31 SRS (AIRBAG) IGN. 5A / 10A INSTRUMENT CLUSTER IGN F32 10A F33 ABS / ESP BLS IGN 5A F34 EMS IGN 10A AT TCU IGN 5A F35 F36 IMMOBILIZER IGN 5A F37 W/W CONTROLLER IGN 5A F38 IGN RELAY COIL 5A

F39 BCM IGN 5A F40 STARTER RELAY COIL 5A F41 POWER SOCKET II ACC 15A

F42 POWER SOCKET I ACC 15A F43 REAR BLOWER ACC 30A F44 HRS COIL, / AT ACC 5A

166 EMERGENCY AND BREAKDOWN ASSISTANCE

Bulbs Bulbs and lamps are an important aspect of vehicle safety. You must therefore make sure that these function correctly at all times. Have the headlamp settings checked regularly.

Specifications

Sr. No. Description Rating Type Qty.

1 HEAD LAMP HIGH BEAM 12V/55W H7 2 2 HEAD LAMP LOW BEAM 12V/55W H7 2 3 PARKING LAMP FRONT 12V/5W W5W 2 4 TURN SIGNAL FRONT 12V/24W PY24W 2 5 OUTBOARD STOP LAMP LED LED MODULE 2 6 OUTBOARD TAIL LAMP LED LED MODULE 2 7 INBOARD STOP LAMP LED LED MODULE 2 8 INBOARD TAIL LAMP LED LED MODULE 2 9 TURN SIGNAL REAR 12V/21W PY21W 2 10 HIGH MOUNTED STOP LAMP LED LED MODULE 1 11 REGISTRATION PLATE LAMP LED LED MODULE 1 12 ROOF LAMP THIRD ROW (If equipped) LED LED MODULE 1 13 ROOF LAMP FIRST AND SECOND ROW (If equipped) LED LED MODULE 2 14 REVERSE LAMP 12V/21W P21W 1 15 FRONT FOG LAMP 12V/35W H8 2

167 EMERGENCY AND BREAKDOWN ASSISTANCE

Sr. No. Description Rating Type Qty.

16 REAR FOG LAMP 12V/21W PR21W 1 17 MOOD LIGHTING LED LED MODULE 6 18 DAYTIME RUNNING LAMPS (DRL) LED LED MODULE 2 19 SIDE REPEATER LAMP ON ORVM LED LED MODULE 2 20 SUN VISOR LAMP (If equipped) 12V/5W W5W 1

NOTE Only install spare bulbs of the same type and the specified voltage.

168 EMERGENCY AND BREAKDOWN ASSISTANCE

24 X 7 Road Assistance Response Time ** for the On Road  Park your vehicle on the edge of the Assistance Program road, open the bonnet and put on the Dear Customer, hazard warning signal. It is our responsibility and our endeavour Within City 60 minutes  Place the advance warning triangle to ensure that you have our complete ser- Limits supplied with the vehicle approx. 3 m vice backup if ever, wherever and when- On State or Na- 90 minutes from the vehicle in the direction of on- ever you need the same. When you have tional High- coming traffic. a road network that spans wide area, the ways probability of a breakdown happening Ghat Roads 120 minutes +/- within hailing distance of a TATA MOTORS and other Authorized Workshop is very low. places It is precisely for this reason, we have tied **(The response time will depend on the up with TVS AA, who will provide break- location, terrain, traffic density and the down assistance including towing to the time of the day.) nearest TATA MOTORS Authorized Work- shop through their Authorized Service Standard procedure when calling for Providers (ASP). On Road Assistance in case of a The 24X7 On Road Assistance Program breakdown: shall be automatically available to your  Dial the toll free help line number – vehicle for the duration of Warranty pe- 1 800 209 7979 riod. The program shall also be available,  Identify your vehicle with the Vehicle if you avail the same post warranty. chassis number that is available in the Owner’s Manual.  Explain your exact location with land- marks and tell us about the problem you face with the vehicle.

169 EMERGENCY AND BREAKDOWN ASSISTANCE

Coverage under 24 X 7 On Road II. The 24x7 On Road Assistance Pro-  Breakdown/defects caused by mis- Assistance program gram coverage on availing the 24X7 pol- use, abuse, negligence, alterations or icy, post warranty is upto maximum of 6 modifications made to the vehicle. The Pro- I. 24x7 On Road Assistance instance of assistance in one year for  Lack of maintenance as per the gram Service covers the following ser- both the plans- Basic and Premium. In the maintenance schedule as detailed in vices on your vehicle during warranty pe- premium plan, this includes 2 instance of the owner’s manual. riod. towing upto the nearest TATA MOTORS  Cases involving racing, rallies, vehicle authorised workshop.  Wheel change through spare wheel. testing or practice for such events.  Arrangement of fuel. (Fuel cost will be Exclusions chargeable at actual cost) Disclaimer  Re-opening the vehicle in cases of key 24 X 7 On Road Assistance Program  **The reach time is indicative & the lock out. does not apply to actual reach time will be conveyed by the call centre at the time of break-  Rectification of electrical problems re-  Cost of parts consumables and labour lated to battery, fuses etc. for such repairs not covered under down call.  On spot repairs for complaints repair- warranty*. These charges are to be  The reach time can vary depending on able at site. ^ settled with ASP in cash. the traffic density & time of the day.  Vehicle to vehicle towing or winching  Toll or ferry charges paid by ASP in  The reach time indicated does not ac- & towing for non-accident cases up to reaching to the breakdown site to be count for delays due to but not limited the nearest TATA MOTORS authorized settled with ASP in actuals in cash. to acts of God, laws, rules & regulations for time being in force, orders of workshop. Towing charges at actual  Cases involving accident, fire, theft, cost beyond the same to be paid to vandalism, riots, lightening, earth- statutory or Govt. authorities, indus- the ASP in cash. (Any ferry or toll quake, windstorm, hail, tsunami, unu- trial disputes, inclement weather, charges levied in relation to the vehi- sual weather conditions, other acts of heavy down pour, floods, storms, nat- cle being towed to be paid by the cus- God, flood, etc. ural calamities, road blocks due to accidents, general strife and law & order tomers in actuals in cash).  Vehicles that are unattended, un-reg- conditions viz. fire, arson, riots, For accident cases, towing charges to istered, impounded or abandoned. be borne by the customer. strikes, terrorist attacks, war etc.

170 EMERGENCY AND BREAKDOWN ASSISTANCE

 ^ On spot repairs at breakdown site will the vehicle be towed to any unau- sentation, malicious intent and re- shall depend on nature of complaints thorized workshop. TATA MOTORS will fusal to pay the charges for any & will be as per the discretion of the not be responsible for any repairs car- charges related services and spare ASP. ried out in such unauthorized work- parts during service or on previous oc-  *The decision for free of charge re- shop. casion on part of the customer. pairs will be as per the warranty policy  Customer are advised to take ac-  On site repairs may be temporary in & procedures of TATA MOTORS LTD. knowledgment from the ASP for the nature. The completion of repairs and as per the interpretation of the list of accessories/extra fittings and does not certify the road worthiness of same by ASP. You will be duly in- other belongings in the vehicle as well the vehicle. The customer is advised formed by the ASP & call centre for the as the current condition related to to ensure temporary repairs carried change applicable if any. dents/scratches breakages of out onsite is followed by permanent  All charges wherever applicable need parts/fitments of the vehicle at the repairs at a TATA MOTORS Authorized to be settled directly with the ASP. time of ASP taking possession of the Workshop at the earliest. vehicle & to verify these items when  Terms and conditions and service cov- Exclusion of Liabilities delivery is taken back by them, Claim erage, exclusions etc. are subject to for loss of or damage to items, if any  It is understood that TATA MOTORS change without notice. should be taken up with ASP directly. shall be under no liability whatsoever in respect of any loss or damage aris- TATA MOTORS shall not be responsi- ing directly or indirectly out of any de- ble for any such claims, damages/loss lay in or non-delivery of, defect/defi- or any deficiency of service of the ASP. ciency in service/parts provided by  Vehicles will be handled, repaired & ASP. towed as per the customer’s risk & TATA MOTORS shall not be liable for  In case vehicle cannot be repaired onsite, customers are advised to use the any damages / claims as a result of towing facility for taking their vehicle the same. to the nearest TATA MOTORS author-  Services entitled to the customers can ized workshop only. In no condition be refused or cancelled on account of abusive behaviour, fraudulent repre-

171 EMERGENCY AND BREAKDOWN ASSISTANCE

172

MAINTENANCE

Maintenance and Service NOTE Periodic maintenance is essential for en- Refer “Opening and Closing” section suring long trouble free performance. for engine bonnet opening.

Have your vehicle serviced regularly from TATA MOTORS authorized service centre. WARNING ! There is a large network of TATA MOTORS Authorized Service Center’s to help you  Be careful not to touch a hot en- with their professional servicing exper- gine, exhaust manifold and pipes, muffler, radiator and water hoses. tise. Scheduled maintenance information is provided which makes tracking routine  Do not work on a vehicle with the service easy. engine running in an enclosed space, unless you are sure you The following checks can be carried out have enough ventilation. between the recommended scheduled  Keep all open flames and other maintenance services. Take help of our burning material (such as ciga- authorized service centre for assistance. rettes) away from the battery and all fuel related parts.  Engine oil level If you need to do any work inside the  Engine coolant level engine compartment,  Brake fluid level  Switch off the ignition  Washer fluid level  Never reach into the area where  Battery electrolyte level there is a risk of danger from  Power steering reservoir moving components, such as the

 Tyre inflation pressure including spare fan rotation area wheel  Keep clothing away from moving parts

174 MAINTENANCE

Engine Compartment

1. Engine oil filling cap 4. Coolant auxiliary tank 7. Battery 2. Brake fluid reservoir 5. Power steering reservoir 8. Fuse & relay box 3. Air Filter 6. Engine oil Dip stick 9. Windshield washer reservoir

175 MAINTENANCE

Engine Oil Level If the level is between MIN mark and MAX mark the oil level is correct. WARNING ! When checking the oil level:  If the oil level has dropped to MIN If engine oil comes into contact with  Park the vehicle on a level surface. mark or below, top up with recom- hot components in the engine com-  Switch off the engine and ensure that mended engine oil. partment, it may ignite. There is a risk engine is at normal operating temper- of fire and injury. ature. NOTE Make sure that engine oil is not spilled  If the engine temperature is high, let next to the filler neck. Let the engine The oil consumption depends upon the engine cool down before checking cool down and thoroughly clean the the driving style and the conditions engine oil off the components before oil level. e.g. if the engine was only under which the vehicle is used. started briefly, wait for about 30 starting the engine.

minutes

WARNING ! WARNING ! Do not remove the filler cap when the Certain components in the engine ! engine is running. compartment, such as the engine, ra- Add oil upto the MAX. mark. Oil levels diator and parts of the exhaust sys- above the MAX. mark may cause en- tem, can become very hot. Working in gine damage. the engine compartment poses a risk of injury. For location of Engine oil filling cap Where possible, let the engine cool and dip stick, please refer Engine Com- down. partment section.  Pull oil dipstick out of the dipstick guide tube.

 Wipe off oil dipstick  Slowly slide oil dipstick into the guide tube to the stop, and take it out again. 176 MAINTENANCE

Brake Fluid Level WARNING ! WARNING ! Do not allow brake fluid to make con- The engine cooling system is pressur- tact with the skin or eyes. ized, particularly when the engine is warm. When opening the cap, you Do not allow brake fluid to splash or could be scalded by hot coolant spill on the paint surface as it will dam- spraying out. There is a risk of injury. age the paint. In case of spillage, wipe Let the engine cool down before it off immediately. opening the cap. Wear eye and hand Engine Coolant Level protection when opening the cap. Open the cap slowly half a turn to allow pressure to escape. The coolant level should be between the The level of the brake fluid should be be- ‘MIN’ and ‘MAX’ marks on the auxiliary tween the ‘MIN’ and ‘MAX’ marks on the tank. side of the brake fluid container. If the When the coolant level is low, top up with level falls below the ‘MIN’ mark, top up recommended coolant through filler of with recommended brake fluid. auxiliary tank until the level approaches the ‘MAX’ level line. For location of Brake Fluid Container and filling cap, please refer respective Engine Compartment section. NOTE Check the coolant level when the vehicle In case of emergency, a large amount is on a level surface and the engine has of water without engine coolant may

cooled down. be added in order to reach a vehicle at service location.

177 MAINTENANCE

Whenever coolant has been added, the Power Steering Fluid Level Windshield Washer Fluid Level coolant level in the auxiliary tank should The level of the power steering fluid Check that there is washer fluid in the be checked the next few times you drive should be between the MIN. and MAX. tank. Refill it if necessary. Use a good the vehicle to confirm correct level. marks on the side of the power steering quality windshield washer fluid, diluted For location of Engine coolant con- fluid container. If the level falls below the with water as necessary. tainer and filler cap, please refer En- MIN. mark, add recommended fluid. (Re- fer ‘Technical information’ section). gine Compartment section. NOTE Do not use detergent or any other ad- NOTE WARNING ! ditive in the windshield washer reser- Topping of the coolant should be Do not start the engine without oil in voir. This can severely impair visibility done in the auxiliary tank only. the power steering system. when sprayed on the windshield, and Do not allow dirt into power steering can also damage your vehicle’s paint. Make sure that only TATA MOTORS rec- fluid reservoir during refilling or top Do not operate washer motor with no ommended coolant (Refer ‘Technical in- up. formation’ section) is used. Mixing of dif- fluid in washer tank, washer motor ferent coolants may harm your engine’s In case of leakage or hard steering, will be damaged cooling system and its components. Do please contact the nearest Authorised not add extra inhibitors or additives to the Service outlet. For location of Windshield Washer filling cap, please refer Engine Compart- coolant. These can be harmful and com- ment section. promise the corrosion protection of the For location of Power steering fluid container, please refer Engine Com- engine coolant. partment section.

178 MAINTENANCE

Battery  If you need to connect the battery to a Turbocharger  Check the battery for electrolyte level charger, disconnect both cables to The turbocharger rotor assembly is sup- against the marking on the battery prevent damage to the vehicle’s elec- ported by two fully floating bearing outer case. trical system. bushes in the bearing housing. These  Check the battery terminals for corro- bearing bushes are lubricated with finely sion (a white or yellowish powder). To For location of battery, please refer En- filtered engine oil from the lubrication sys- gine Compartment section. remove it, cover the terminals with a tem of the engine. solution of baking soda. It will bubble NOTE Lubrication of Turbocharger up and turn brown. During normal operation, the bat- Idle the engine for a while (one minute) af-  When this stops, wash it off with plain tery generates gas which is explo- ter starting the engine and before stop- water. Dry off the battery with a cloth sive in nature. A spark or open ping the engine to ensure adequate lubri- or paper towel. flame can cause the battery to ex- cating oil supply to the turbocharger.  Coat the terminals with petroleum jelly plode causing very serious injuries. to prevent future corrosion. Keep all sparks, open flames and NOTE smoking materials away from the  Use a proper wrench to loosen and re- Keep engine at idling speed for at battery. move cables from the terminals. least a minute after starting and also The battery contains sulphuric acid before stopping, to protect the turbo-  Always disconnect the negative (-ve) (electrolyte) which is poisonous and charger against damage due to oil cable first and reconnect it last. highly corrosive in nature. Getting starvation.  Clean the battery terminals with a ter- electrolyte in your eyes or on the skin minal cleaning tool or wire brush. can cause severe burns. Wear protective clothing and a face shield or have Reconnect and tighten the cables,  a skilled technician to do the battery coat the terminals with petroleum maintenance. jelly.

 Ensure that the battery is securely mounted. 179 MAINTENANCE

Intercooler Maintenance recommendations: effective functioning of the converter and to avoid damage to the converter. Hot air coming out of turbocharger flows  Check the boost pressure pipe for its through the intercooler and gets cooled proper fitment, damage etc. 1. It is mandatory to use Diesel fuel with before entering the intake manifold.  Specified engine oil and the oil filter low sulphur content (Refer recom- should be used and should be mended fuels). Use of any other diesel As such it does not require any mainte- changed regularly in accordance with fuel can increase the pollutants. nance however it can be cleaned exter- Service Schedule. 2. Avoid parking the vehicle over inflam- nally by blowing compressed air.  Check oil feed pipes, return pipes, air mable materials, such as dry leaves, Transmission Air Oil Cooler intake and exhaust piping for leak- grass, etc., as the exhaust system is ages and restrictions. hot enough to initiate fire. For automatic transmission, hot oil com-  Check the engine breathing system ing out of transmission flows through Maintenance recommendations: and oil separator. transmission air oil cooler and gets cooled Catalytic Converter should be flushed by before entering transmission again.  Fill the oil inlet hole of the turbocharger with clean engine oil, when giving full throttle (4 to 5 times) in stand- As such it does not require any mainte- the engine is started after long stor- ing condition of vehicle on daily basis. For nance however it can be cleaned exter- age. high speed driving condition run hot for nally by blowing compressed air. few km as this will help to flush the carbon Catalytic Converter soot deposits from exhaust system and catalytic converter. High speed running of WARNING ! The catalytic converter is fitted on your vehicle to reduce exhaust pollution. The cat- the vehicle may be done periodically to While cleaning, ensure that inter- alytic converter will quickly heat up after avoid chocking of catalytic converter. cooler and transmission air oil cooler starting to ensure that it operates cor- fins are not damaged. If the fins get Alternatively flushing operation for clean- rectly during the warm up phase of the en- ing the catalytic converter can be done by damaged, it could lead to lose of per- gine. formance and subsequent failure. dry compressed air draft (3 to 4 bar) di- The catalytic converter does not require rected on the honeycomb structure of cat- any special maintenance however, follow- alytic converter (after removing from vehi- ing precautions should be taken for the cle).

180 MAINTENANCE

Tyres Inflation WARNING ! Check for inflation and condition of your  Avoid push start or tow-starting vehicle tyres periodically. the vehicle. (Use jump leads).  Avoid long (not more than 10 sec.) Check the pressure in the tyres when they and repeat (not more than 3 are cold. times) starting of the vehicle. In- Keeping the tyres properly inflated gives vestigate the cause for difficulty in you the best combination of riding com- starting & rectify the same. fort, handling, tyre life and better fuel effi-  Avoid long idling (to warm-up). If ciency. the engine is running rough, after a cold start. Over inflation of tyres makes the vehicle  Avoid stopping the vehicle in Drive ride bumpy and harsh. Tyres are more mode too long with brake pressed prone to uneven wear and damage from road hazards. since it may overheat and damage 1. Under Excessive s ide transmission. Change to Neutral inflation tread wear Under inflated tyres reduce your comfort or Park mode at the earliest. in vehicle handling and are prone to fail- Correct tyre Uniform pres-  Never switch off the ignition when 2. ures due to high temperature. They also driving down the hill. (This will not sure wear cause uneven wear and more fuel con- save fuel). 3. Over inflation Excessive sumption.  Avoid fuel tank getting almost center tread empty. wear NOTE  Avoid pre-coating / painting of catalytic converter. Every time you check inflation pressure, you should also examine tyres for damage, trapping of foreign objects in the treads and wear.

181 MAINTENANCE

Recommended tyre pressures in Tyre pressure sticker location Regular checking of wheels & tyres cold condition for 16" and 17" tyre WARNING ! Wheels Tyre Pressure Damaged tyres can cause tyre infla- Front 34 psi (2.3 bar) tion pressure loss. As a result, you Rear 34 psi (2.3 bar) could lose control of your vehicle. There is a risk of accident. Check the tyres regularly for signs of damage For 15" (if equipped) and replace any damaged tyres immediately. Wheels Tyre Pressure Check wheels and tyres for damage at Front 36 psi (2.5 bar) least once a month. Check wheels and Rear 36 psi (2.5 bar) tyres after driving off-road or on rough roads. Damaged wheels can cause a loss

of tyre pressure. Pay particular attention (if equipped) For 19" tyre to damage such as:  Cuts / Tears in the tyres  Punctures  Bulges on tyres  Deformation or severe corrosion on wheels Regularly check the tyre tread depth and the condition of the tread across the whole width of the tyre. If necessary, turn the front wheels to full lock in order to inspect the inner side of the tyre surface.

182 MAINTENANCE All wheels must have a valve cap to pro- Always replace wheels and tyres with tect the valve against dirt and moisture. WARNING ! those that fulfill the specifications of Do not mount anything onto the valve A flat tyre severely impairs the driving, the original part. other than the standard valve cap. steering and braking characteristics When replacing wheels, make sure to Regularly check the pressure of all the of the vehicle. There is a risk of acci- use the correct specification as rec- tyres particularly prior to long trips. Adjust dent. ommended. the tyre pressure as necessary.

The service life of tyres depends, among NOTE other things, on the following factors: Life and wear pattern of tyres de- WARNING ! pends on various parameters like tyre Insufficient tyre tread will reduce tyre  driving style pressure, wheel alignment, wheel traction. The tyre is no longer able to  tyre pressure balancing, tyre rotation, etc. It also dissipate water. This means that on distance covered  largely depends on vehicle speed, wet road surfaces, the risk of hydro-  wheel alignment & tyre rotation load carried, usage, driving habits, planing increases, in particular where (at recommended interval) road conditions, tyre quality, etc. to speed is not adapted to suit the driv- poor quality of tyres, the same may ing conditions. There is a risk of acci- be taken up with concerned tyre man- dent. ufacturer. If the tyre pressure is too high or too

low, tyres may exhibit different levels WARNING ! of wear at different locations on the tyre tread. Thus, you should regularly If wheels and tyres of the wrong size check the tread depth and the condi- are used, the wheel brakes or sus- tion of the tread across the entire pension components may be dam- width of all tyres. aged. There is a risk of an accident.

183 MAINTENANCE

Special care for tubeless tyres: Tyre rotation Applicable for vehicle with temporary spare wheel (if equipped)  While removing tyre from wheel rim To help increase tyre life and distribute and mounting it back on wheel rim, wear more evenly you should have tyres take precautions not to damage tyre rotated at specified intervals or earlier de- bead. Use tyre removal and assembly pending on the operation of vehicle. machines. Damage or cut on tyre Applicable for all tyres Including spare bead may cause gradual loss of air wheel of same size and type and deflation of tyre.  Do not scratch inside of tubeless tyre with metallic or sharp object. Tubeless tyres are coated with impermeable layer of rubber from inside which holds the air inside the tyre. Removal of this layer due to scratching may sscause gradual loss of air and defla- . tion.  If wheel rim gets damaged in service, get the wheel rim repaired/ replaced immediately. Running the vehicle with damaged rim may cause deflation of tyre and subsequent dislodging of tyre from rim.  Maintain recommended inflation pressure. Over-inflation, in particular, may cause puncture or bursting of tyre.

184 MAINTENANCE

Wheel Balancing Remote Key Battery Replacement  Insert the new battery. Wheels of your vehicle are balanced for Remote control key contains a battery. It better ride comfort and longer tyre life. is under the remote cover. Balancing needs to be done whenever To replace the discharged battery: tyre is removed from rim.  Open the key blade. WARNING !  Press off the battery cover with your If the vehicle vibrates abnormally on thumb or using a flat screw driver at a smooth road, have the wheel bal- the points of the arrows. anced done immediately.  Remove the discharged battery from the key by pressing the battery down- Wheel Alignment wards at the point of the arrow. Incorrect wheel alignment causes excessive and uneven tyre wear. Check wheel  Ensure that the ‘+’ symbol on the bat- alignment at specified intervals. Wheel tery is facing upwards. The correct alignment values are given below: polarity is shown on the battery cover. Front Rear  Position the battery cover on the key Caster 3º ± 30’ - and press on it until it is heard to lock in place. Camber 0º ± 30’ - NOTE Toe in 2 – 5 mm - Use CR 2032 battery only. LH to RH variation of Caster to be within 45’

LH to RH variation of Camber to be within 30’

185 MAINTENANCE

On Board Diagnostic (OBD II) System On board Diagnostics or OBD is an auto- motive term referring to a vehicle’s self- diagnostic and reporting capability. The OBD system allows continuous diagnosis of the components of the vehicle corre- lated with emissions. This system warns the driver, by turning “ON” the Malfunc- tion Indication lamp (MIL) on the instrument cluster, when a fault causes emission levels to increase.

The OBD system also has a diagnostic connector that can be interfaced with appropriate diagnostic tools, which makes it possible to read the fault codes stored in the Electronic Control Unit, together with a series of specific parameters for Engine operation and Diagnosis. This check can also be carried out by the traffic authorities.

186 MAINTENANCE

SERVICE INSTRUCTIONS NOTE The TATA HEXA has been manufactured to give you economical and trouble free per- Servicing of the vehicle can be done formance. To achieve this please follow at any TATA MOTORS Authorized the instructions as stated. Dealer Workshop or TATA MOTORS Authorized Service Centre (TASC). Your vehicle is entitled to three free ser- Warranty claims can be settled by vices (labour only). The free service cou- any TATA MOTORS Authorized Dealer pons are attached to the sales invoice. Workshop or TATA MOTORS Author- Please present these coupons to the ser- ized Service Centre (TASC). vicing dealer while availing free services.

1st free service - At 5000 kms. OR 3, months, whichever is earlier. 2nd free service - At 10000 kms. OR 6 months, whichever is earlier. 3rd free service - At 20000 kms. OR 12 months, whichever is earlier. All services other than free services are chargeable.

187 MAINTENANCE

)

500 , 00 500

, , 1 5 10,500 20,500 30,500 40,500 50,500 60,500 70,500 80,500 90,500 ------

Sr. PDI Operation 000 ,000 No. , ,000 ,000 ,000 ,000 5 0 0,000 0,000 0,000 0,000 0,000 1 2 30 4 50 6 7 8 90 Frequency (Km Frequency 1,00

Months - 3 6 12 18 24 30 36 42 48 54 60 General Wash the vehicle & clean the con- Every 1 ● ● ● ● ● ● ● ● ● ● ● ● denser with compressed air. Service Check & Top up Fluids if required: Engine oil, Coolant, Brake/ Clutch Every Fluid, Battery Electrolyte, Power 2 ● ● ● ● ● ● ● ● ● ● Steering Oil, Gear Box Oil, Transfer 10,000 or case (if applicable) & Front Axle 6 Months 4X4 (if applicable) / Rear Axle Oil Drain water accumulated in Fuel Pre filter cum sedimenter and fuel Every 3 ● ● ● ● ● ● ● ● ● ● ● ● filter (OR whenever the Warning Service lamp glows) Check engine compartment for loose fasteners and for any leakages in fuel lines, coolant hoses, air Every 4 ● ● ● ● ● ● ● ● ● ● ● ● hoses, vacuum hoses and hydraulic Service line connections. Attend if necessary.

188 MAINTENANCE

)

1,00,500 5,500 10,500 20,500 30,500 40,500 50,500 60,500 70,500 80,500 90,500 ------

Sr. PDI Operation No. 5,000 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 Frequency (Km Frequency 1,00,000

Months - 3 6 12 18 24 30 36 42 48 54 60 Check Underbody for loose fasteners and for any damage or leakage in fuel pipes, hydraulic Every 5 ● ● ● ● ● ● ● ● ● ● ● ● line connections, rack & pinion & Service exhaust system including rubber hangers. Attend if necessary. Apply grease on door latches, locks, check straps, strikers, bon- Every 6 net opening lever, bonnet hinges 10,000 or ● ● ● ● ● ● ● ● ● ● & lock plate, tailgate hinges & 6 Months door lock inner ratchet. Check for proper tightening of Every 7 Door latch & Striker screws, Tail 10,000 or ● ● ● ● ● ● ● ● ● ● gate latch and striker screws 6 Months Check & ensure normal working Every 8 of the vehicle using diagnostic ● ● ● ● ● ● ● ● ● ● ● ● Service equipment. Every Reset the Service interval in In- 9 ● ● ● ● ● ● ● ● ● ● strument Cluster 10,000 or 6 Months

189 MAINTENANCE

)

1,00,500 5,500 10,500 20,500 30,500 40,500 50,500 60,500 70,500 80,500 90,500 ------

Sr. PDI Operation 000 ,000 No. , ,000 ,000 ,000 ,000 5 0 0,000 0,000 0,000 0,000 0,000 1 2 30 4 50 6 7 8 90 Frequency (Km Frequency 1,00

Months - 3 6 12 18 24 30 36 42 48 54 60

2.2L Varicor Engine Replace Engine Oil and Oil filter Every 20K 1 (Every 20,000 Km OR 1 year or 12 ● ● ● ● ● whichever is earlier) months Replace element / cartridge of Every Pre-filter cum Sedimenter (Every 20K 2 ● ● ● ● ● 20,000 Km OR 1 year whichever or 12 is earlier) months Change Main Fuel filter Every 60K 3 (Every 60,000 Km OR 3 years or 36 ● whichever is earlier) months Change Air filter element Every 40K 4 (Every 40,000 Km OR 3 years or 36 ● ● whichever is earlier) months Check accessory Drive belts ( Al- ternator & Compressor ) adjust Every 10K 5 tension if required, change if or 12 ● ● ● ● ● ● ● ● ● ● damaged (Every 10,000 Km OR 1 months years whichever is earlier)

190 MAINTENANCE

1,00,500 5,500 10,500 20,500 30,500 40,500 50,500 60,500 70,500 80,500 90,500 ------

Sr. PDI Operation No. 5,000 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 Frequency (Km) Frequency 1,00,000

Months - 3 6 12 18 24 30 36 42 48 54 60 Replace Timing Belt & Timing Belt Every kms OR years/60 months whichever is earlier 6 tensioner 1,50,000 5 Change Engine Coolant (Every Every 60K 7 60,000 km OR 3 year / 36 months or 36 ● whichever is earlier) months Check Accessory drive for Power Every 10K Steering Pump. Change if damaged or ● ● ● ● ● ● ● ● ● ● 8 (Every 10,000 km OR 1 year, whichever is earlier) 12 months Gear Box Replace Gear box Oil and Clean Breather (Manual Transmission -- if applicable) Every 90K ● 1 (First at 40,000 km and thereafter or 5 Years every 90,000 km OR 5 years whichever is earlier ) Clean Breather of 6L550 - Auto- Every ● ● ● ● ● ● ● ● ● ● 2 matic Transmission 10,000 Change Gearbox Oil (6L550 - Auto- Filled for life time 3 matic Transmission) (If applicable). Change oil in TOD 4 Filled for life time (For 4X4 Only - if applicable) 191 MAINTENANCE

1,00,500 5,500 10,500 20,500 30,500 40,500 50,500 60,500 70,500 80,500 90,500 ------

Sr. PDI Operation No. 5,000 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 Frequency (Km) Frequency 1,00,000

Months - 3 6 12 18 24 30 36 42 48 54 60

Propeller Shaft Grease propeller shaft with grease gun (at slip joint - splines end) & Every 1 check Centre bracket mounting 10,000 or ● ● ● ● ● ● ● ● ● ● bolts for looseness. Tighten if nec- 6 Months essary. Check for rubber cracks on Tor- Every 2 sional Vibration Damper (TVD), re- 10,000 or ● ● ● ● ● ● ● ● ● ● place if necessary 6 Months Every Change TVD (Every 60,000 km) or 60,000 ● 3 5 Years whichever is earlier. or 5 Years

Front Axle (For 4x4) / Rear Axle Replace Axle Oil ( Front (For 4x4) (if applicable)/ Rear) (Every 80,000 Every 80K 1 ● km OR 5 years / 60 months which- or 5 Years ever is earlier) Every Clean Breather in front (for x ) 4 4 ● ● ● ● ● ● ● ● ● ● 2 (if applicable) and Rear axle 10,000 or 6 Months

192 MAINTENANCE

)

5,500 10,500 20,500 30,500 40,500 50,500 60,500 70,500 80,500 90,500 1,00,500 ------

Sr. PDI Operation 000 No. , ,000 ,000 ,000 ,000 ,000 5 0 0,000 0,000 0,000 0,000 0,000 1 2 30 4 50 6 7 8 90 Frequency (Km Frequency 1,00

Months - 3 6 12 18 24 30 36 42 48 54 60

Suspension & Steering Check wheel alignment/ Steering Every 1 wheel spoke alignment/ wheel bal- ● ● ● ● ● ancing & adjust if necessary 20,000 Check shock absorber and rubber bushes. Replace if necessary (First Every 2 ● ● ● ● ● ● ● ● at 30,000 km and thereafter at Service every service) Check and apply grease to Front & Every 3 ● ● ● rear ARB bearing block bushes 30,000 Check condition of rubber bushes in Top & Lower wishbones, coil spring rubber seat, Anti roll bars, Rear links, Pan-hard rod, rubber Every 4 ● ● ● boots/dust cover/ bellow in Rack & 30,000 pinion, steering ball joints & column, Suspension Ball Joints Replace if necessary. Replace Power steering Oil & filter Every 100K 5 element (Every 1,00,000 km OR 3 ● years, whichever is earlier) or 3 Years 193 MAINTENANCE

)

1,00,500 5,500 10,500 20,500 30,500 40,500 50,500 60,500 70,500 80,500 90,500 ------

Sr. PDI Operation 000 ,000 No. , ,000 ,000 ,000 ,000 5 0 0,000 0,000 0,000 0,000 0,000 1 2 30 4 50 6 7 8 90 Frequency (Km Frequency 1,00

Months - 3 6 12 18 24 30 36 42 48 54 60

Brakes

Check parking brakes, adjust if nec- Every ● ● ● ● ● ● ● ● ● ● ● 1 essary Service Check front brake & rear brake Every 2 pads, re-grease DIH liner resting 10,000 or ● ● ● ● ● ● ● ● ● ● points. Replace if necessary. 6 Months Replace Brake Fluid (Every 40,000 Every 40K 3 km or 2 years/24 months which- or 24 ● ● ever is earlier) months

Electricals

Check headlamp focusing & func- Every 1 ● ● ● ● ● tioning of all electrical equipment’s 20,000

Check for looseness of + Ve Termi- Every 2 nals on Alternator and Starter mo- ● ● ● tor 30,000

194 MAINTENANCE

)

1,00,500 5,500 10,500 20,500 30,500 40,500 50,500 60,500 70,500 80,500 90,500 ------

Sr. PDI Operation 000 ,000 No. , ,000 ,000 ,000 ,000 5 0 0,000 0,000 0,000 0,000 0,000 1 2 30 4 50 6 7 8 90 Frequency (Km Frequency 1,00

Months - 3 6 12 18 24 30 36 42 48 54 60

AC System

Check HVAC System for satisfactory Every ● ● ● ● ● ● ● ● ● ● ● ● 1 performance, attend if required. Service Every 2 Check and Clean A.C Filter 20,000 or ● ● ● ● ● 12 months

Wheel & Tyres Every 1 Tyre Rotation 10,000 or ● ● ● ● ● ● ● ● ● ● 6 months Check tyre pressure (in cold condition). Every ● ● ● ● ● ● ● ● ● ● ● ● 2 Note: Additionally, tyre pressure to Service be checked every 15 days.

195 MAINTENANCE

Additional Maintenance Schedule under Severe Driving Conditions

Sr. Condition Operation Frequency No. A B C D

1 Engine oil and oil filter Change every 10,000 kms OR 6 months ● ● ● ●

2 Air filter element Change at every 20,000 km or 18 months whichever is earlier ● ●

Front (For 4X4) & rear axle oil Change at first kms ( months) & thereafter at kms ( 3 20,000 18 50,000 36 ● ● ● change months)

A - Driving in conditions such as Patrolling, Taxi, Pickup Van, Vehicle Towing, with Trailer Towing B - Driving on Dusty / Sandy roads C - Frequently operating in mountainous area D - More than 50% (in terms of kms) driving in heavy city traffic

NOTE In case of emergency, a large amount of water without engine coolant may be added in order to reach a vehicle service location.

196 MAINTENANCE

Vehicle Parking at One Place for 9. Inflate the tyres to 0.5 bar above the Long Duration normal specified pressure and check it at regular intervals. (Non - Use Maintenance) 10. Check the battery regularly. Change if If you want to park your vehicle at one required. place for long duration, following care is 11. Do not drain the engine cooling sys- to be taken: tem. 1. Park the vehicle in covered, dry and if possible well-ventilated premises. 2. Remove the battery terminal cables (first remove the cable from the negative terminal). 3. Block the wheel or engage in the gear mode. 4. Clean and protect the painted parts using protective wax. 5. Clean and protect the shiny metal parts using commercially available special compounds. 6. Sprinkle talcum powder on the rubber windscreen wiper blades and lift them off the glass. 7. Slightly open the windows. 8. Cover the vehicle with a cloth or perfo- rated plastic sheet. Do not use sheets of imperforated plastic as they do not allow moisture on the vehicle body to evaporate.

197 MAINTENANCE

198

TECHNICAL INFORMATION

Fuel Specification Percentage Ambient Temper- Fuel 0 ature in C Winter grade Supplementary High Speed diesel conforming to IS1460 or EN 590 or equivalent diesel fuel is recommended to be used as fuel. Up to -15 100 0 At very low temperature, fluidity of diesel may become insuffi- -20 to -15 70 30 cient due to paraffin separation. It is therefore necessary to mix -20 and below 50 50 supplementary fuel with summer or winter grade diesel. The supplementary fuel to be used is kerosene or aviation turbine fuel. WARNING ! Ratio for mixing of supplementary fuel and diesel are shown in the table. Do not mix gasoline or alcohol with diesel. This mixture can cause an explosion. Percentage Ambient Temperature Lubricants in 0C Summer grade Supplementary diesel fuel Engine oil: Recommended grade of engine oil confirming to API CI4 Plus, (SAE 15W-40) or higher grade engine oil to be used. Up to 0 100 0 Specification and range of ambient temperature at which these -10 to 0 70 30 can be used are given in the table below: -15 to -10 50 50 Ambient Temp. in ºC Engine Oil Grade Care should be taken that diesel and supplementary fuel are -5 and above SAE 15W40 thoroughly mixed before filling. -10 to 0 SAE 5W30 -20 to -10 SAE 0W30

200 TECHNICAL INFORMATION

Lubricant Specifications Item Specification Company and Brand Qty. EXXON MOBIL Super Diesel 15W40 CI-4 Plus PETRONAS TATA MOTORS Genuine Oil - Engine Oil API CI4 Plus, (SAE ENGINE OIL CI4+ 15W40 7.5 Litres 15W-40) IOCL Servo TATA Motors Genuine oil CI4 Plus GTX Professional 15W40 CI 4+ Sunstar TATA Motors Genuine Coolant 2200 40:60 ratio ANAND TATA Motors Genuine Coolant Purocool++ An- COOLANT Approx. 9 Litres Premixed chemo Anand Castrol Radicool SFO Premix

Castrol SYNTRO 75W90 GL4 G76 ( MK-II) - Synthetic gear oil 2.2 Litres 75W90 GL4 IOCL Servo TATA Motors Genuine Gear Oil - 75W90 GEAR BOX G76 (MK-I) – EXXON MOBIL MOBILUBE 1 SHC 75W90 1.9 Litres

SAE 80W90 IOCL Servo Gear Axle oil TM 80W-90 FE G85 – 3.25 Litres (Optional) CASTROL Transmax Axle T 80W90 Automatic Transmission ATF DEXRON-VI EXXON MOBIL IMP 6544 MOBIL DEXRON-VI Approx. 11.4 Litres (6L50)

201 TECHNICAL INFORMATION

Item Specification Company and Brand Qty.

TOD -- SHELL Spirax S3 ATF MD3 1.2 - 1.4 Litres

Castrol ATF DEX III

POWER STEERING OIL ATF-DEXRON III D IOCL Servo TATA Motors Transdex III 1.6 Litres EXXON MOBIL Mobil ATF 220

CASTROL Extra Long Life Rear Axle Oil 85W140

REAR AXLE 85W140 API-GL5 PETRONAS TATA MOTORS Genuine Oil - Axle Oil 1.8 Litres (For fric- (Limited Slip Differential) Anglomol 6043 85W140 tion modifier) IOCL Servo TATA Motors Genuine Axle Oil - 85W 140 REAR AXLE 80W90 axle oil CASTROL Transmax Axle T 80W90 1.8 Litres (Standard Differential)

202 TECHNICAL INFORMATION

Item Specification Company and Brand Qty. 80W90 oil with A LIVE FRONT AXLE CASTROL Transmax Axle T 80W90 1.8 Litres 2099 additive S-CCI Golden Cruiser TATA Genuine Brake Fluid (DOT4) BRAKE / CLUTCH SAE J 1703, DOT 4 As required FLUID CASTROL Brake fluid DOT 4

Petronas TUTELA Brake Fluid TOP 4 TM Grease -- 3% MoS2 (ARB, Control mounting As required SS:6820-320 -- bracket)

203 TECHNICAL INFORMATION

Technical Specifications Rear Axle Engine Type ABS with LSD / ESP without LSD Model TATA 2.2L VARICOR Steering Rack and Pinion steering with power assis- Type Direct injection, Common rail, Turbo- Type tance (Hydraulic). charged, Intercooled Diesel Engine Brakes No. Of Cylinders 4 inline Vacuum assisted independent hydraulic Capacity 2179 cc brakes on front & rear through tandem Service Brake master cylinder. Vacuum pump camshaft 1) 115 kW (156 Ps) @ 4000 +/- 100 driven Maximum En- rpm Ventilated disc brakes with twin pot cali- gine Output Front Brakes 2) 110 kW (150 Ps ) @ 4000 rpm per 1. Disc Brake – Single pot caliper with Maximum 1) 400 Nm @ 1750 - 2500 rpm Rear Brake DIH Torque 2) 320 Nm @ 1500 – 3000 rpm 2. Drum Brake (If applicable) Anti-lock Brak- Transmission ing System 4 channel , 4 sensors (For ABS) 1) G-6450, 6 Speed with overdrives. (ABS)

2) Auto Transmission 6 speed (6L50) Electronic Sta- Model bility Program 4 Channel, 4 Sensors & Other Sensors 3) GBS-76 -5 speed/ 4.1, MK-II OR (ESP) MK-I Lever type, Console mounted, Cable oper- Parking Brake ated mechanical linkage acting on Rear wheels through DIH.

204 TECHNICAL INFORMATION

Frame Fuel Tank Ladder type cranked frame with Box Capacity 60 Litres Type section members and welded cross members Electrical System Suspension System Voltage 12 Volts (-ve earth) Double wishbone type with coil springs Front Alternator Ca- over Shock Absorber. 155 amps pacity Coil spring type 5 link rigid axle Rear suspension Battery 12V, 75Ah/80Ah Hydraulic double acting telescopic Shock Absorber Performance at Front & Rear Max. Speed at 180 kmph Anti-roll Bar At both front & rear rated GVW

Wheels & Tyres Grade Restarta- 1) 235/55 R19 (105 T) bility (at rated 43% 2) 235/70 R16 (105 S) GVW) Tyres 3) 235/65 R17 (105 S ) Max. gradeabil- 4) 235/75 R15 (105 S ) ity (at rated 61% 1) 7.5J X 19 Alloy GVW) 2) 6.5J X 16 Stylized / Standard Steel Passenger Capacity Wheel Rims 3) 6.5J X 16 Alloy 4) 7.5J X 17 Alloy Passenger Ca- Front Seat: Driver + 1, 5) 6 J X 15 Steel pacity Middle Seat: 3 (Bench Seat, 60:40) or No. of Wheels Front : 2 Rear : 2 Spare :1 2 (Captain Seats) Rear Seat: 2 (Front Facing)

205 TECHNICAL INFORMATION

Weights (Kg) Luggage Space Gross Vehicle Variants Kerb Weight Net inside load- ~ 1000 mm wide x ~ 800 mm long Weight (GVW) ing space (with 4 passengers + Driver) XM/XM+ 4x2 (7 seater) 2738 2113 Main Chassis Dimension as per ISO:612 In mm XM 4x2 (6 seater) 2719 2094 Wheel Base 2850 XT 4x2 (7 seater) 2806 2181 1) 1590 (with 19” tyres) Track Front XT 4x2 (6 seater) 2787 2162 2) 1580 (with 15”, 16”, 17” tyres) 1) 1560 (with 19” tyres) XT 4x4 (7 seater) 2905 2280 Track Rear 2) 1550 (with 15”, 16”, 17” tyres) XT 4x4 (6 seater) 2886 2261 Overall Length 4788 over rear bumper XMA 4x2 (7 Seater) 2755 2130 Overall Height 1785 XMA 4x2 (6 Seater) 2736 2111 Max. Width 1900 XMA 4x4 (7 Seater) 2855 2230 1) 209 mm (unladen - with 19” tyres) Ground Clear- XMA 4x4 (6 Seater) 2836 2211 2) 200 mm (unladen - with 15”, 16”, 17” ance tyres) XTA 4x2 (7 Seater) 2800 2175 XTA 4x2 (6 Seater) 2781 2156 XE 4x2 (7 Seater) 2708 2083 XE 4x2 (6 Seater) 2689 2064

206 TECHNICAL INFORMATION

Vehicle Dimensions

Refer ‘Technical Specifications’ for dimensions

207 TECHNICAL INFORMATION

208

VEHICLE CARE

Vehicle Care cleaners like ‘Stain remover’ which are safe for paint surfaces. NOTE Your vehicle is subjected to many external Avoid wiping of painted surface in dry influences such as climate, road condi- 5. Avoid substances like petrol, diesel, condition as it may leave scratches tions, industrial pollution and proximity to kerosene, benzene, thinner or other sol- on the painted surface. the sea. These conditions demand regu- vents that cause damage to paint. lar care of the vehicle body. Dirt, insects, 6. Dry your vehicle thoroughly to prevent Cleaning of Carpets bird droppings, oil, grease, fuel and stone any damp spots. chippings should be removed as soon as Vacuum clean the carpet regularly to re- possible. 7. Rinse all surfaces thoroughly to prevent move dirt. Dirt will make the carpet wear any traces of soap and other cleaners as out faster. Periodically shampoo the car- Washing this may lead to the formation of stains on pet to keep it looking new. Follow these tips while washing your vehi- the painted surface later. Use carpet cleaners (preferably foam cle. type). Follow the instructions that come with the cleaner. Apply it with a sponge or Hand wash: WARNING ! soft brush. Keep the carpeting as dry as Do not direct high pressure washer 1. Always wash your vehicle in shade. possible by not adding water to the foam. fluid/ water jets (Pressure above 0.5 2. Wash with mild vehicle wash soap like Bar) at electrical devices and con- Cleaning of Windows, Front and ‘Car Shampoo’ and use a soft bristle necter during washing. This is to pre- Rear Glasses brush, sponge or soft cloth and rinse it fre- vent malfunction / failure of electrical quently while washing to avoid scratches. system due to water ingress. Clean the windows inside and outside with commercially available glass clean- 3. To avoid scratches, please wear soft After drying the vehicle, inspect it for ers. gloves. Remove finger rings, nails, wrist chips and scratches that could allow cor- watch while washing. rosion to start. Apply touch up paint where This will remove the haze that builds up necessary. on the inside of windows. Use a soft cloth 4. To remove stubborn stains and con- or paper towels to clean all glass and plas- taminants like tar, use turpentine or tic surfaces.

210 VEHICLE CARE

RFID TAG is pasted on front windshield Polishing 5. Do not use household detergents to from the inside. It enables Electronic toll clean the fabric. collection. Polishes and cleaners can restore shine to the painted surface that has oxidized 6. Always use clean cotton cloth for clean- and become dull. They normally contain ing. mild abrasives and solvents that remove the top layer of the finish coat. Polish your Paint Care vehicle, if the finish does not regain its Following guidelines will help you to pro- original shine after using wax. tect your Vehicle from corrosion effectively. Interior fabric cleaning tips NOTE 1. Stains should be treated immediately. Proper cleaning Do not attempt to rip or tamper the If left for a long time, they can leave a per- In order to protect your vehicle from cor- tag. It will disable the functionality of manent mark. rosion it is recommended that you wash the tag. 2. Cleaning the stains immediately is im- your vehicle thoroughly and frequently in portant especially for stains which contain case: Waxing artificial colors in the stain creating liquid  There is a heavy accumulation of dirt Waxing and polishing is recommended to or semisolid substance. The colorant may and mud especially on the underbody. leave a stain if kept for longer time. maintain the gloss and wet-look appear-  It is driven in areas having high atmos- ance of your paint finish. 3. Stain should not be removed by rub- pheric pollution due to smoke, soot, 1. Use good quality polish and wax for bing. As far as possible, try to blot or lift dust, iron dust and other chemical pol- your vehicle. the stain with cloth or plastic spatula and lutants. then clean the remaining stain with cloth  It is driven in coastal areas. 2. Re-wax your vehicle when the water or sponge.  The underbody must be thoroughly does not slip off the surface but collects pressure washed after every three over the surface in patches. 4. If the stain has dried, then gently brush months. off the material and then press with damp cloth or sponge till it disappears.

211 VEHICLE CARE

In addition to regularly washing your car, Wiper care the following precautions need to be taken. Wiper blade attack angle on windshield glass should be 90° i.e. perpendicular. Periodic Inspection Remove wiper blade and root wiper arm on windshield glass in the center position. Regularly inspect your vehicle for any  Check the gap between arm strip and damage in the paint film such as deep glass. scratches and immediately get them

repaired from an authorized service outlet, as these defects tend to accelerate corrosion.

 Inspect mud liners for damages.  Keep all drain holes clear from clogging.

Proper Parking

Always park your vehicle in shade to  protect it from harsh sunlight or in a WARNING ! well-ventilated garage so that there is no dampness on any part of the vehi- Do not attempt to remove dirt from a cle. dry windshield with the wipers or you can damage the windshield and the

wiper blades. Always wet the windshield with washer fluid before operating the wipers.

212 VEHICLE CARE

EXTENDED WARRANTY TATA MOTORS recommends the purchase of its extended warranty program. Coverage - Mechanical + Electrical Benefits  Insures you against unforeseen break down repair bills.  Documentation is simple and hassle free.  Near cashless & speedy claim Term

36 + 12 months or 150000 kms whichever occurs first Extended Warranty is available in the dealership from where you have purchased your vehicle. We strongly recommend purchase of Extended Warranty at time of purchase of your vehicle. Extended Warranty can be availed till 421 days from date of purchase of vehicle. The Dealer Service Marketing Executive shall explain to you the Terms and conditions, Coverage and Owner’s responsibility.

Extended Warranty Booklet & Cover Note The Extended Warranty booklet and cover note is the basis of the contract between TATA MOTORS LIMITED and the Owner of the vehicle shown on the Extended Warranty booklet. The Customer is to retain this booklet and the same to be produced to the dealer while claiming benefit s under Extended Warranty.

Note  The 12 months extended warranty does not follow the 36 months Manufacturer's warranty.  The extended warranty comes into force once the manufacturer’s warranty expires e.g. after 36 Months.  It is more restrictive as by the time it comes into force the vehicle is already 36 months old.

213 VEHICLE CARE

What is covered?  Mechanical / Electrical break down as defined in this warranty and confirmed by the dealer within the stipulated terms and conditions.  TATA MOTORS dealer shall either rep air or replace any part found to be defective with a new p art or an equivalent at no cost to the owner for p arts or labour.  Such defective parts which have been replaced will become property of TATA MOTORS LIMITED.  Comprehensive list of parts covered is mentioned in the page 9-12 of the Extended Warranty Booklet. What is not covered? Please refer the Extended Warranty Booklet for details of the exclusion list. Owner’s Responsibility:  Proper use, maintenance and care of the vehicle in accordance with the instructions contained in the Owner’s Manual and  Service Booklet. The records of the same to be ensured in Owner’s Manual.  Retention of maintenance service bills.

I / We have been explained the Terms and conditions, Coverage and Owner’s responsibility by the Dealer Service Marketing Executive. I wish to avail / Do not wish to avail extended warrant policy.

Customer’s Signature Dealer’s Signature

214 VEHICLE CARE

VALUE ADDED SEVICES Why are Corrosion Protection Waxes necessary? Corrosion is caused by: Water / salt water acid rain & atmospheric fallouts.

Critical areas are:  Cavities: joints, crevices, spot welds, underbody  Corrosion is the most important factor when we talk about the vehicle life. If you treat your vehicle you can prolong the life.  It is very dangerous to drive around in a corroded vehicle.  The corrosion creeps onto the vehicle from the inside and from the outside. The most dangerous kind of corrosion is often not discovered until it is too late.

Benefits of Anti - Rust treatment:  A professionally applied range of world class products offering real value to the new and used vehicle customer.  The treatment has been developed to withstand the harshest environmental and climatic conditions (rust. Pollutants, stone and gravel impact, etc.)  Insulate cabin space from external noises.  Expensive tin work and Denting / Painting avoided.  Higher resale value for the vehicle.  Higher safety – uncorroded vehicle  10 free checkups available

215 VEHICLE CARE

Engine Wax Treatment Engine Wax is a beige colored transparent lacquer coating on the engine compartment.  Corrosion Prevention for the Engine compartment.  Neat, clean and New Look to Engine compartment.  No effect on MPFI vehicles.  Engine wax can withstand upto 200 degrees temperature.  No need of cleaning the engine compartment with diesel once engine wax is sprayed.  Life of over a year. Sound Deadening System Door vibration deadeners - These pads when stuck on the insides of the sheet metal increase sheet metal rigidity, reduce vibrations and increase riding comfort.

 Used for reducing the sheet metal vibration in a vehicle.  Product to be used once in the life of the vehicle - Life Time Warranty  Effect is life long i.e. until & unless pads are physically removed.  Negligible increase in Weight & hence no effect on fuel consumption.  Areas covered - four doors, rear quarter panels & dickey. In case of diesel vehicles, can be used in the bonnet. TATA MOTORS has tied up with M/s Wurth, M/s Autokrom, M/s 3M India Lt d & M/s Bardahl for these world class treatment at affordable prices. These treatments are available in all authorized workshops. The Dealer Service Marketing Executive will explain to you the benefits and terms and conditions of this treatment. I / We have been explained the Benefit s, Terms and conditions and the prices of these treatment s by the Dealer Service Marketing Executive. I wish to avail / Do not wish to avail extended warrant policy.

Customer’s Signature Dealer’s Signature 216 VEHICLE CARE

Vehicle Exterior Enrichment

Why vehicles are painted?  For Corrosion protection of the metal surfaces.  Ease of application from other corrosion protection treatments.  Cheaper than other corrosion protection methods e.g. Galvanizing, anodizing.  For decoration and identification. Various Environmental Hazards affecting paints Environmental hazards: destroy your vehicle's finish. Even as your new vehicle rolls off the assembly line, the paint is not protected.

The enemy Ultraviolet Rays, Pollution, Tree Sap, Bird Droppings, Car Wash Chemicals, Road Salt, Acid Rain.

Benefits: Vehicle Exterior Enrichment  Removal of medium stains and dirt from all interior parts of the vehicle i.e. carpet, upholstery and roof lining.  Cleaning of windshield and all windows (inside and outside)  Dressing of all internal plastics (e.g.: door pad trims) and rubber parts.  The treatment involves cleaning and dressing of all parts of the exposed interiors.  Specialized protection for seat fabric from liquid spills. TATA MOTORS has tied up with M/s Wurth and M/s Autokrom for this world class treatment at affordable prices. This treatment is available in all authorized workshops. The Dealer Service Marketing Executive will explain to you the benefits and terms and conditions of this treatment

217 VEHICLE CARE

Engine Flush treatment helps in  Safely and effectively cleaning and removing oxidized particles and fluid contamination left behind from previous oil changes  Preventing further deposits  Freeing sticky lifters and rings  Chemically “tuning” the engine during driving  Restoring pep and power  Removing sludge from valve train  Promoting fuel economy and improving overall engine operation Special products used for improving compression To fortify new oil and seal rings for optimum performance, special products from BG (RF7) and Bardhal (Special Duty) are added to new engine oil. This makes it suitable for petrol and diesel engine applications

Resulting in:  Improved engine compression  Increased power and increased fuel economy  Reduced start-up wear  Increased engine life, especially under severe service conditions  Reduced emissions and oil consumption  Improved power & performance of older engines  Prevention of sludge, gum and varnish formation on engine parts both petrol & diesel engines

218 VEHICLE CARE

Please note: These are symptomatic treatments to be availed beyond 20000 kms and only when you have problems in your car as mentioned in first paragraph and are to be done only after you give your consent for carrying out these treatments.

TATA MOTORS has tied up with M/s HOEC Bardahl India Ltd and M/s BG for these world class treatment at affordable prices. These treatments are available in all authorized workshops. The Dealer Service Marketing Executive will explain to you the benefits and terms and conditions of this treatment.

I / We have been explained the Benefit s, Terms and conditions and the prices of these treatment s by the Dealer Service Marketing Executive. I wish to avail / Do not wish to avail extended warrant policy.

Customer’s Signature Dealer’s Signature

219 VEHICLE CARE

220

WARRANTY

We WARRANT each TATA HEXA vehicle 3. Any part which is found to be defective accident or loading in excess of such and parts thereof manufactured by us to and is replaced by us under the war- carrying capacity as certified by us, or be free from defect in material and work- ranty shall be our property. such services as prescribed in our manship subject to the following terms Owner's Manual are not carried out by and conditions: 4. As for such parts as Tyres, Batteries, the buyer through our sales or service Audio and / or Video equipment (if establishments, our authorized deal- 1. This warranty for engine (Varicor) fit- any), etc. not manufactured by us but ers, service centres or service points. ted in the vehicle shall be for a period supplied by other parties, this war- of 36 months OR 1,50,000 kms, ranty shall not apply, but buyers of the whichever is earlier from the date of 6. This warranty shall not apply to the car shall be entitled to, so far as per- sale of the vehicle. replacement of normal wear parts, missible by law, all such rights as we including without limitation, spark The warranty for the rest of the vehicle may have against such parties under plugs, drive belts, hoses, wiper shall be for a period of 36 months OR their warranties in respect of such blades, fuses, clutch disc, brake 1,00,000 kms, whichever is earlier parts. shoes, brake pads, cables and all from the date of sale of the vehicle. rubber parts (except oil seal and 5. This warranty shall not apply if the car glass run). 2. Our obligation under this warranty or any part thereof is repaired or al- shall be limited to repairing or replac- tered otherwise than in accordance 7. This warranty shall not cover any in- ing, free of charge, such parts of the with our standard repair procedure or herent normal deterioration of the car car which, in our opinion, are defec- by any person other than from our or any of its parts arising from the active, on the car being brought to us or sales or service establishments, our tual use of the car or any damage due to our dealers within the period. The authorized dealers, service centres or to negligent or improper operation or parts so repaired or replaced shall service points in any way so as, in our storage of the car. also be warranted for quality and judgment which shall be final and workmanship but such warranty shall binding, to affect its reliability, nor 8. This warranty shall not apply to normal be co-terminus with this original war- shall it apply if, in our opinion which maintenance services like oils & fluid ranty. shall be final and binding, the car is changes, head lamps focusing, fas- subjected to misuse, negligence, im- tener retightening, wheel balancing proper or inadequate maintenance or

222 WARRANTY

and alignment, tyre rotation, adjust- part and we neither assume, nor au- 15. We reserve our rights to make any ment of valve clearance, fuel timing, thorize any person to assume on our change or modification in design of ignition timing and consumables like behalf, any other liability arising from the car or its parts or to introduce any bulbs, fuel, air & oil filters and gas the sale of the car or any agreement improvement therein or to incorporate leaks in case of air conditioned cars. in relation thereto. in the car any additional part or accessory at any time without incurring any 9. This warranty shall not apply to any 12. The buyer shall have no other rights obligation to incorporate the same in damage or deterioration caused by except those set out above and have, the cars previously sold. environmental pollution or bird drop- in particular, no right to repudiate the pings. Slight irregularities not recog- sale, or any agreement or to claim any nized as affecting the function or qual- reduction in the purchase price of the ity of the vehicle or parts, such as car, or to demand any damages or slight noise or vibration, defects ap- compensation for losses, incidental or pearing only under particular or irreg- indirect, or inconvenience or conse- ular operations are items considered quential damages, loss of car, or loss characteristics of the vehicle. of time, or otherwise, incurred or ac- crued. 10. This warranty shall be null and void if the car is subjected to abnormal use 13. Any claim arising from this warranty such as rallying, racing or participation shall be recognized only if it is notified in any other competitive sport. This in writing to us or to our authorized warranty shall not apply to any repair dealer without any delay soon after or replacements as a result of acci- such defects as covered & ascer- dent or collision. tained under this warranty.

11. This warranty is expressly in lieu of all 14. This warranty is fully transferable warranties, whether by law or other- to subsequent vehicle owner. Only wise, expressed or implied, and all unexpired remaining period of war- other obligations or liabilities on our ranty applies.

223 WARRANTY

224

ENVIRONMENT SAFETY

TATA MOTORS LTD. is committed to produce vehicles using envi- Maintenance ronmentally sustainable technology. A number of features have been incorporated in TATA MOTORS passenger vehicles which  Ensure that recommended maintenance is carried out on the have been designed to ensure environmental compatibility vehicle regularly at the Authorised Service Outlets. throughout the life cycle of the vehicle. We would like to inform  As soon as you see any leakages of oil or fuel in the vehicle you that your vehicle meets emission norms and this is being we recommend to get it attended immediately. regularly validated at the manufacturing stages.  Use only recommended grades and specified quantity of lubricants. As a user you too can protect the environment by operating your  Get your vehicle checked for emission periodically by an au- vehicle in a proactive manner. A lot depends on your driving style thorised dealer. and the way you maintain your vehicle. We have given a few tips  Ensure that fuel filter, oil filter and breather are checked pe- for your guidance. riodically and replaced, if required, as recommended by TATA Driving MOTORS.  Do not pour used oils or coolants into the sewage drains, gar-  Avoid frequent and violent acceleration. den soil or open streams. Dispose the used filters and bat-  Do not carry any unnecessary weight in the vehicle as it over- teries in compliance with the current legislation. loads the engine. Avoid using devices requiring high power  Do not allow unauthorized person to tamper with engine set- consumption during slow city traffic condition. tings or to carry modifications on the vehicle.  Monitor the vehicle’s fuel consumption regularly and if show-  Never allow the vehicle to run out of fuel. ing rising trend get the vehicle immediately attended at the  Parts like brake liners, clutch discs should be vacuum Company’s Authorised Service Outlets. cleaned. Do not use compressed air for cleaning these parts  Switch off the engine during long stops at traffic jams or sig- which may spread dust in the atmosphere. nals. If you need to keep the engine running, avoid unnecessary revving it up or stopping and starting.  It is not necessary to rev up the engine before turning it off as it unnecessarily burns the fuel.  Shift to higher gears as soon as it is possible. Use each gear upto 2/3rd of its maximum engine speed.

226 ENVIRONMENT SAFETY

While carrying out servicing or repairs of your vehicle, you should pay keen attention to some of the important engine aggregates and wiring harness which greatly affect emission. These components are:  Fuel injection equipment’s - pump, rail, injectors, nozzles and high pressure pipes.  Air Intake & Exhaust system, especially for leakages.  Cylinder head for valve leakage.  All filters such as air, oil and fuel filters (check periodically).  Turbocharger  EGR system and components  Electrical connections  If the ‘Check Engine’ and ‘MIL’ lamp continuously glows, please take the vehicle to a TATA MOTORS authorized service outlet.  EMS wiring harness i.e. electrical connections to all sensors and actuators. This Owner’s manual contains further information on driving precautions and maintenance care leading to environment protection. Please familiarize yourself with these aspects before driving.

227

ENVIRONMENT SAFETY

228

VEHICLE SERVICE &

SERVICE COUPONS

VEHICLE SERVICE

Vehicle Record

Km. reading Fuel filled Fuel consumption Remarks / complaints

230 VEHICLE SERVICE

Record of Warranty Repairs Carried Out

Repair reading Particulars of Repair Servicing Dealer’s Signature Date Odometer (km) Order No. & Stamp

231 VEHICLE SERVICE

Record of Services Performed

Recommended Servicing Dealer’s Signature & Date Odometer Reading Repair Order No. Service Stamp At km. PDI

5,000

10,000

20,000

30,000

40,000 50,000

60,000

70,000

80,000

90,000

1,00,000

232 Chassis No. ………………...... At the time of delivery of vehicle, please ensure that Engine No. ……………………… pre-delivery inspection has been carried out as per details given in the SERVICE SCHEDULE. Gear Box No. ……………………

Chassis No. ………………...... At 10,000-10500 km OR 6 months whichever is earlier FREE Engine No. ……………………… Please bring your vehicle for this service FREE LABOUR Gear Box No. …………………… As per details given in the SERVICE SCHEDULE LABOUR

WORK DONE TO MY SATISFACTION WORK DONE TO MY SATISFACTION

Sign. Of customer………………………. Speedo Reading …………………….Km. seal O.K./ Broken Speedo Reading …………………….Km. seal O.K./ Broken R.O. No. ……………………………………..Date…………… R.O. No. ……………………………………..Date…………… Dealer’s / Authorised Service Centre’s Dealer’s / Authorised Service Centre’s Stamp & Signature……………………………………………. Stamp & Signature…………………………………………….

Chassis No. ………………...... Chassis No. ………………...... Engine No. ……………………… Engine No. ………………………

At 20,000-20500 km OR 12 months whichever is earlier At 5,000-5,500 km OR 3 months whichever is earlier

Please bring your vehicle for this service FREE Please bring your vehicle for this service FREE As per details given in the SERVICE SCHEDULE LABOUR As per details given in the SERVICE SCHEDULE LABOUR

WORK DONE TO MY SATISFACTION WORK DONE TO MY SATISFACTION

Sign. Of customer………………………. Sign. Of customer………………………. Speedo Reading …………………….Km. seal O.K./ Broken Speedo Reading …………………….Km. seal O.K./ Broken R.O. No. ……………………………………..Date…………… R.O. No. ……………………………………..Date…………… Dealer’s / Authorised Service Centre’s Dealer’s / Authorised Service Centre’s Stamp & Signature……………………………………………. Stamp & Signature…………………………………………….