OFFROAD Suspension Systems

Total Page:16

File Type:pdf, Size:1020Kb

OFFROAD Suspension Systems SUSPENSION SYSTEMS making everyday smoother • Increased comfort • Better driveability • More safety OFFROAD Increased comfort Driving on what are usually poor roads or off-road stretches demands a lot of the driver and the vehicle. A good air suspen- sion system minimises noise levels inside the vehicle and ensu- res a relaxing journey. Goods that are sensitive to shock are transported gently. Better driveability The constant ride height guaranteed by VB-FullAir suspension means your vehicle remains stable and responds to steering A safe and comfortable journey inputs as you expect. The dual channel control system ensures Everything under control with suspension systems from VB-Airsuspension your vehicle remains level and reduces body roll. Start the day relaxed More safety The day starts well; after loading you climb into your vehicle It’s therefore very important that your vehicle and its The (air) suspension systems from VB-Airsuspension improve in a relaxed frame of mind. suspension are in good shape. vehicle stability in crosswinds, when cornering and when What you gain: Away you go, fully loaded, and that’s when the stress levels evasive action, for example, is necessary. ✓ Constant ride height start to rise. A comfortable and properly working suspension Hidden, but effective ✓ Prevents off-centre level can make all the difference to your working day, so you’re A good suspension is hidden underneath your vehicle. You can’t ✓ Less body roll just as relaxed at the end of it as you were in the morning. see it, but it’s essential if you’re to enjoy a comfortable and safe ✓ Increased comfort journey. After all, it’s the mechanical / pneumatic interface ✓ Better driveability between the road and your vehicle. - Off-centre level ✓ Increased stability - Sagging - Reduced comfort ✓ More safety - Poor driving characteristics - Less safety ✓ Easier loading/unloading - Loading problems - Gentle transportation ✓ Less damage in transit VB-FullAir full air suspension Features of VB-FullAir systems Driving at the limit Easy loading Comfortable and safe driving is very important, particularly The vehicle can be raised or lowered to a specific height at the in offroad vehicles. An unusual aspect of this type of vehicle touch of a button. This makes the vehicle much easier to load is the fact that their loads often vary widely, which in turn is Driving dynamics and unload. reflected in the requirements placed on the suspension. The The suspension fitted to offroad vehicles is designed for the weight of the vehicle increases as each item is loaded, while payload; comfort can come a poor second. A whole range of Letter-Of-Non-Objection (LONO) each additional kilo lowers the suspension even more. parameters influence the driving dynamics and how a vehicle VB-Airsuspension products have been developed in Loading up to the maximum permitted total weight (and can be loaded. Loading, in particular, is an important factor in conjunction with a variety of vehicle manufacturers. As a sometimes even higher) has a corresponding impact on ride terms of overall safety. The suspension optimisation measures result, they meet the manufacturers‘ stringent quality comfort and safety. The ground clearance reduces at the available from VB-Airsuspension improve the personal driving requirements. The relevant LONOs of the vehicle same time, something that is not desirable in the case of an experience by offering various suspension systems and manufacturers are available. off-road vehicle. bespoke solutions. Every system provides the best possible driving dynamics and level of safety that it can. You won‘t recognise your vehicle any more. It‘s all in hand Versatile VB-FullAir air suspension systems VB-FullAir systems are extremely versatile and offer the are supplied with a comprehensive highest levels of comfort in every situation. control unit to ensure you have all Memory positions the air suspension functions close Manual lifting at hand. Manual lowering VB-FullAir VB-SemiAir VB-FullAir is a fully automatic (adjustable) solution for the vehicle will constantly remain at the ride height set by VB-SemiAir enables the suspension to be adjusted even when it is loaded unevenly. VB-SemiAir therefore has suspension problems. The existing leaf- or coil-spring is VB-Airsuspension (during installation). manually within certain limits. On a vehicle with leaf springs, two inflation valves/switches. replaced by a complete air-suspension system (including air Both the road holding and the stability of the vehicle will be an air spring is fitted between the chassis and rear axle. This springs, shock absorbers, a compressor and an electronic improved, which in turn will enhance safety. When the vehicle air spring supports the existing leaf spring. VB-SemiAir is This basic system is the starting point for the modification control unit). is stationary (parking brake applied), it is possible to raise and supplied as a dual chamber system, but the air springs are not and improvement of the suspension on your vehicle. The air-suspension system filters out road-surface lower the step height / load platform to facilitate loading and connected to each other. Each basic VB-SemiAir system contains all necessary imperfections, hence improving ride comfort. While driving, unloading. Making use of a dual chamber system allows left and right parts to allow fitment to the particular make and model. to be separately adjusted, enabling the vehicle to be levelled, AUTO LEVEL SPORT A perfectly horizontal plane at the touch of a Lowering by 30 mm for sporty and firm button: made possible by the integrated digi- suspension. tal level. GAUGE Provides an accurate indication of the pressure in bar inside the air springs. OFF ROAD PARKING The vehicle is raised to the maximum pos- Lowers the height of the vehicle as far as possible sible height to achieve ground clearance on to make entering and exiting the vehicle easier. uneven terrain. MANUAL MEMORY FUNCTION Independent height adjustment through For the individual, freely programmable individual control of the air suspension on the height position of the suspension. front and rear axle. Every VB-SemiAir comfort system contains a Versatile HIGH/LOW SWITCH manometer, a high/low switch and a compressor with Independent pressure control to operate the air The VB-FullAir systems are extremely versatile and suspension individually. high load-bearing capacity. The high/low switch enables provide comfort in all situations. you to raise or lower the ride height of your vehicle and AutoLevel Tilt function Sport Manual raising allows you to pump the air spring in the best possible way. OffRoad Memory position Parking Manual lowering The manometer provides an accurate indication of the pressure in bar inside the air springs. VB-SpecialParts Stabilisers A stabiliser ensures that the vertical movements made by one wheel are (to a lesser degree) also made by the same wheel on the other side of the vehicle. This will lessen the amount of VB-CoilSpring body-roll in corners and reduce crosswind sensitivity. A (heavy Information Fitting reinforced coil springs is a non-adjustable solution duty) stabiliser is particularly recommended for vehicles with a Products for our Pick Up range for suspension problems. A helper spring or replacement coil high centre of gravity. Ford Ranger spring is used on vehicles that already have coil springs. An Kit Axle Remark Fitting time Partnumber VB-SemiAir rear Base 2 1550617200 auxiliary coil spring is fitted next to the existing leaf springs. Shock absorbers VB-SemiAir rear Comfort-Camp 4 VBSA-FOT6-01C VB-FullAir-4C front-rear Available soon These reinforced springs will normally ensure that the Fitting heavy duty shock absorbers will ensure that the vehicle Isuzu D-Max vehicle returns to its original ride height (if not higher), thus movements, in relation to the road surface, are absorbed more Kit Axle Remark Fitting time Partnumber VB-SemiAir rear Base 2 1551314200 increasing the suspension travel and improving stability. effectively. The vehicle will return to its correct driving position VB-SemiAir rear Comfort-Camp 4 VBSA-ISDMAX-01C VB-FullAir-2C rear Available soon sooner after each movement. Vehicles with soft suspension are Landrover Defender This solution is often used for vehicles that are consistently generally found to be comfortable but often demonstrate unstable Kit Axle Remark Fitting time Partnumber VB-FullAir-4C front-rear On request heavily laden or which need higher ground clearance. road holding. By fitting heavy duty shock absorbers, the stability Mercedes-Benz G-Klasse and hence the ride comfort/driving characteristics will improve. Kit Axle Remark Fitting time Partnumber VB-FullAir-4C front-rear Available soon Nissan Navara Kit Axle Remark Fitting time Partnumber VB-SemiAir rear Base 2 1551025200 VB-SemiAir rear Comfort-Camp 4 VBSA-NID40-01C VB-FullAir-4C front-rear Available soon Toyota Hi-Lux Kit Axle Remark Fitting time Partnumber VB-SemiAir rear Base 2 1551102200 VB-SemiAir rear Comfort-Camp 4 VBSA-TON70-01C Volkswagen Amarok Kit Axle Remark Fitting time Partnumber VB-SemiAir rear Base 3 1550917100 VB-SemiAir rear Comfort-LCV. 4 VBSA-VWAMARK-01B VB-FullAir-2C front-rear Available soon (customer reference) VB-Airsuspension, where service comes first “The suspension is super. No faults at all, despite some really hard stages. It didn’t give us a single With partners in more than 50 countries, VB-Airsuspension operates an extensive problem! Something else worth mentioning is that the ride was pretty comfortable. I didn’t feel as tired after this 10,000 km thrash as I did on earlier Dakar rallys! We were carrying quite a lot of ballast, truth be network of authorised VB dealerships and service partners. For fitting, service told we had far too much weight on board, but the suspension made the car very stable and it and advice, there‘s always an expert in your area.
Recommended publications
  • Development of Active Air Suspension System for Small Agricultural Vehicles
    Big Data In Agriculture (BDA) 2(2) (2020) 41-46 Big Data In Agriculture (BDA) DOI: http://doi.org/10.26480/bda.02.2020.41.46 ISSN: 2682-7786 (Online) CODEN: BDAIDR RESEARCH ARTICLE DEVELOPMENT OF ACTIVE AIR SUSPENSION SYSTEM FOR SMALL AGRICULTURAL VEHICLES Kamran Ikrama, Yasir Niaza, Shanawar Hamida, Muhammad Usman Ghanib, Muhammad Zeeshan Manshad, Muhammad Adnan Bodlaha, Muhammad Nadeemb,f, Muhammad Mubashar Omarb, Faizan Shabira, Muhammad Mohsin Waqasa*, Hassan Arshadc, Robeel Alic, Ghulam Yasine, Shoaib Hassanc, M. Bilal Akramc a Departmennt of Agricultural Engineering, Khwaja Fareed University of Engineering and Information Technology, Rahim Yar Khan. Pakistan b University of Agriculture, Faisalabad, Pakistan c Department of Mechanical Engineering, IEFR, Pakistan d Department of Plant Pathology, College of Agriculture BZU, Bahadur Sub-campus Layyah, Pakistan e Department of Forestry and Range Management, BZU, Multan, Pakistan f Department of Engineering, Faculty of Agriculture, Dalhousie University, Canada *Corresponding Author Email: [email protected] This is an open access article distributed under the Creative Commons Attribution License CC BY 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited ARTICLE DETAILS ABSTRACT Article History: Air ride suspension carries the load on each axle with a pressurized air bag just as a high pressure balloon. This system provides the smoothest and most shock free ride of any of the known vehicle suspension system. Received 11 January 2020 An air suspension includes a multiple air spring assemblies that each includes a piston airbag and a primary Accepted 13 February 2020 airbag mounted over the piston airbag.
    [Show full text]
  • Multi-Axle Air Suspension System for a Vehicle
    Europaisches Patentamt European Patent Office Office europeen des brevets (g) Publication number: 0 435 587 A2 12 EUROPEAN PATENT APPLICATION @ Application number : 90314050.7 © Int CI.5 : B60G 5/00, B60G 11/27, B60G 17/052 (22) Date of filing : 20.12.90 (So) Priority : 23.12.89 GB 8929185 @ Inventor : Griffiths, Paul John 13 East Green, Sealand Manor, Sealand Deeside, Clwyd, CH5 2SG, Wales (GB) (43) Date of publication of application : 03.07.91 Bulletin 91/27 @ Representative : Spall, Christopher John et al BARKER, BRETTELL & DUNCAN 138 Hagley @ Designated Contracting States : Road BE DE DK ES FR IT NL Edgbaston Birmingham B16 9PW (GB) (71) Applicant : RUBERY OWEN-ROCKWELL LIMITED P.O. Box 10, Booth Street, Darlaston Wednesbury West Midlands WS10 8JD (GB) (3) Multi-axle air suspension system for a vehicle. @ A multi-axle air suspension system for a tipping vehicle having towards its near a rear axle (7'") and at least one other axle (7", T) forward of the rear axle, provides selective over-riding of the normal load equalising system between the axles during tipping so as to alleviate hogging bending moments on the vehicle's chassis. A selectively operable pressure reducing valve (41) is in circuit with a pressure air source, air springs (7C, 8C) of the rear axle (7"') and with first and second valves (23, 32), selectively operated by a third valve (39), which are in circuit with the air springs (7C, 8C ; 7B, 8B ; 7A, 8A) of the rear axle (7"') and the other axle(s) (7", 7). Operation of the first and second valves (23, 32) isolates the air springs (7C, 8C) of at least the rear axles (7"') from those of the other axle or axles (7", 7') and connects the pressure reducing valve (41) to the latter air springs (7B, 8B ; 7A, 8A) so as to lower the air pressure in those air springs.
    [Show full text]
  • Active Air Suspension System
    IJSRD - International Journal for Scientific Research & Development| Vol. 6, Issue 05, 2018 | ISSN (online): 2321-0613 Active Air Suspension System Suchit Naresh Moon Department of Mechanical Engineering Nagpur Institute of Technology, India Abstract— Air ride suspension carries the load on each axle with a pressurized air bag just as a high pressure balloon. This system provides the smoothest and most shock free ride of any of the known vehicle suspension system. An air suspension includes a multiple air spring assemblies that each includes a piston airbag and a primary airbag mounted over the piston airbag. The primary and piston airbags each have a variable volume that is controlled independently of the other for active suspension control. Air ride system provides some important following features: 1) The system automatically adjusts air pressure in the air bag so that the trailer always rides at the same height, whether lightly loaded or heavily loaded. 2) The higher air bag pressure associated with higher trailer loads automatically provides a stiffer suspension which is required for a smooth ride. 3) The lower air bag pressure for lightly loaded conditions automatically provides for a softer suspension, thus providing the same ride quality for all trailer loading conditions. Since each axle is independently supported by its own air bag, Fig. 1: Locating Suspension Units the air ride suspension is known as fully independent suspension system. The automatic control of the air bag II. FULLY ACTIVE SUSPENSION SYSTEM pressure is accomplished by a solid state electronic control system specifically designed and packaged for vehicle use. Active suspension system has the ability to response to the This system continuously checks the ride height of the vertical changes in the road input.
    [Show full text]
  • Cars • Chassis & Active Safety Systems Suspension Systems in Model 164
    Cars • Chassis & active safety systems Suspension systems in model 164, 221, 251 Specialist training Information module Cars • Chassis & active safety systems Suspension systems in model 164, 221, 251 Specialist training Information module r As at 12/05 This document is intended solely for use in training and is not subject to regular updating. Printed in Germany Note: © 2005 Copyright DaimlerChrysler AG The term »employees« does not imply any preference of gender and incorporated male and refers to maler Publisher: Global Training and female employees alike. This document with all its sections is protected under the laws of copyright. Its use for any purpose whatsoever requires the prior written consent of DaimlerChrysler AG. This applies in particular to its reproduction, distribution, modification, translation, recording on microfilm or storage and/or processing in electronic systems, including databases and on-line services. 1511 1724 02 - 1st Edition 12.05 42 As at 12/05 Content 11.01.2006 Title Page Suspension <> AIRmatic ..................................................................................................................................................................................................................... 1 AIRmatic W221 Signal Path / Block Diagram ..................................................................................................................................................................................... 2 AIRmatic W221 Level Stages.............................................................................................................................................................................................................
    [Show full text]
  • BRAKING PERFORMANCE of AIR SUSPENDED CONVERTER DOLLIES Mr
    Pages 319-335 BRAKING PERFORMANCE OF AIR SUSPENDED CONVERTER DOLLIES Mr. Scott McFarlane and Dr. Peter Sweatman Roaduser Research Pty Ltd ABSTRACT In 1996 the National Road Transport Committee (NRTC) released a national heavy vehicle axle Mass Limit Review (MLR). The MLR recommended an axle mass increase for axle groups suspended by road-friendly air-suspension. For an air-suspension to be classified as Road Friendly it is required to have a bounce frequency below 2.0Hz and have damping greater than 20% of critical. It is also a requirement that the suspension group achieves load sharing within 5%. Air suspended converter dollies have become popular in Australia, particularly the triaxle type. Triaxle dollies offer a productivity benefit of between 2.5 and 4.5 tonne when compared to a tandem converter dolly. There was concern that the increased mass offered to air-suspended dollies would significantly affect the performance of road trains under braking. The Roaduser Autosim Truck Engineering Dynamics (RATED) computer simulation models were used to simulate the performance of hinged and rigid drawbar tandem and triaxle dollies under braking. The results from the simulation showed that an air-suspended tandem converter dolly could pitch significantly under braking when compared to mechanically suspended dollies. Triaxle air suspended dollies were found to pitch somewhat less than the tandem air-suspended dolly and generated a lower longitudinal force in the coupling. This indicated that the triaxle dolly has better brake balance and should be encouraged by allowing the weight increase. Rigid drawbars on converter dollies reduce the amount of dolly pitch and hence have better brake balance.
    [Show full text]
  • SUSPENSION SYSTEMS Making Everyday Smoother
    SUSPENSION SYSTEMS making everyday smoother VB-AIRSUSPENSION, THE IDEAL SOLUTION FOR ANY (SUSPENSION) PROBLEM. Product selection assistance Find the perfect solution for you! Product selection assistance I INTRODUCTION 03 TABLE OF CONTENTS 3 INTRODUCTION 5 ABOUT US 7 PRODUCT GROUPS 9 TROUBLESHOOTING WE MAKE EVERY Table 1: Which product group? 11 FULL AIR SUSPENSION JOURNEY A GOOD Table 2: Find the perfect solution for you! 13 VB-NIVOAIR ONE. 15 VB-FULLAIR 2C A good suspension system must provide both spring force and damping, so that the vehicle feels both stable and comfortable to drive. In 17 VB-FULLAIR 4C order to achieve this, each vehicle is fitted with suspension (coil spring suspension, leaf suspension or torsion bar suspension) and shock absorbers. The suspension under the vehicle ensures that passengers and/or the cargo do not feel every bump in the road surface. The 19 VB-ACTIVEAIR shock absorbers dampen the movement of the suspension; without shock absorbers, the vehicle would continue to pitch and roll. 21 SEMI AIR SUSPENSION Unfortunately, the standard suspension fitted to your vehicle often does not provide optimum comfort. If the level of comfort does not Table 3: Find the perfect solution for you! meet your expectations, it can leave you feeling dissatisfied. We offer a suitable solution for every (suspension) problem to help resolve this dissatisfaction. Our innovative air suspension systems and suspension applications help to ensure optimum ride comfort, increased 23 VB-SEMIAIR BASIC SYSTEM stability and greater safety, so that you can enjoy a safe and worry-free journey and be more satisfied with your vehicle.
    [Show full text]
  • Electronic Stability Control Systems on Heavy Vehicles
    U.S. Department Of Transportation National Highway Traffic Safety Administration PRELIMINARY REGULATORY IMPACT ANALYSIS FMVSS No. 136 Electronic Stability Control Systems On Heavy Vehicles Office of Regulatory Analysis and Evaluation National Center for Statistics and Analysis May 2012 People Saving People TABLE OF CONTENTS EXECUTIVE SUMMARY------------------------------------------------------ E-1 I. INTRODUCTION --------------------------------------------------- I-1 II. PROPOSED REQUIREMENTS ---------------------------------- II-1 A. Definition of ESC ------------------------------------------- II-3 B. Performance Requirements ---------------------------------II-4 1. Slowly Increasing Steer Maneuver ------------------- II-5 2. Sine With Dwell Maneuver ---------------------------- II-6 C. ESC Malfunction Telltale and Symbol ------------------- II-13 D. ESC Off Switch, Telltale and Symbol -------------------- II-14 III. HOW ESC WORKS ------------------------------------------------ III-1 A. ESC Systems ------------------------------------------------- III-1 B. How ESC Prevents Rollovers ------------------------------ III-1 C. How ESC Prevents Loss of Control ---------------------- III-3 IV. BENEFITS ----------------------------------------------------------- IV-1 A. Effectiveness of ESC and RSC ---------------------------- IV-3 B. Initial Target Population ------------------------------------ IV-7 C. Projected Target Population ------------------------------- IV-13 D. Benefits ------------------------------------------------------ IV-21
    [Show full text]
  • Air Suspension Specific Information
    12/11/2019 Front Suspension • Wheel Alignment • Standard Procedure • 2011 Jeep Grand Cherokee (5.7L) - WK • MotoLogic CURB HEIGHT MEASUREMENT Report a problem with this article The wheel alignment is to be checked and all alignment adjustments made with the vehicle at its required curb height specification. Vehicle height is to be checked with the vehicle on a flat, level surface, preferably a vehicle alignment rack. The tires are to be inflated to the recommended pressure. All tires are to be the same size as standard equipment. Vehicle height is checked with the fuel tank full of fuel, and no passenger or luggage compartment load. Inspect the vehicle for bent or weak suspension components. Compare the parts tag on the suspect coil spring(s) to the parts book and the vehicle sales code, checking for a match. Once removed from the vehicle, compare the coil spring height to a correct new or known good coil spring. The heights should vary if the suspect spring is weak. Ride height is measured at each corner of the vehicle by calculating the difference between the cradle bolt and the center of the wheel or axle heights as follows: AIR SUSPENSION SPECIFIC INFORMATION NOTE: For vehicles with Air Suspension (SER), metric measurements must be used for accuracy AND when writing ride height values to the Air Suspension Control Module (ASCM) using a scan tool. NOTE: A different ride height setting is used for checking or performing an alignment. When measuring curb height, vehicles equipped with Air Suspension (SER) must be in the manually selected "Auto" position (5) of the terrain select switch (10), or the Normal Ride Height (NRH) mode if using a scan tool.
    [Show full text]
  • Audi Q8 – Suspension
    Audi Q8 – Suspension With as much as 254 millimeters (10.0 in) of ground clearance, short overhangs, quattro permanent all-wheel drive and hill descent control, the Audi Q8 can keep going when paved roads end. The suspension with damper control is standard. Responsive on narrow country roads, composed on the highway and robust off-road: the suspension of the Audi Q8 also combines the best characteristics from various worlds. Five-link suspensions are used at the front and rear so that longitudinal and lateral forces can be handled separately. The linkages and the subframes are made largely of aluminum. The SUV coupé has a track of 1,679 millimeters (5.51 ft) up front and 1,691 millimeters (5.55 ft) at the rear. The standard progressive steering in the Audi Q8 features a sporty and rather low ratio of 14.6:1 in the center position and becomes even more direct with increasing steering angle. The steering system with its electromechanical drive provides differentiated road feedback. It responds spontaneously and is highly precise. Audi also offers optional all-wheel steering. With this system, a high-torque electric spindle drive and two track rods turn the rear wheels. At low speeds, they turn up to 5 degrees opposite the direction of the front wheels. They thus reduce the SUV’s turning circle by a good meter (3.3 ft) and make it even more agile. At high speeds, they turn up to 1.5 degrees in the same direction as the front wheels to provide greater stability during fast lane changes.
    [Show full text]
  • Allegro Bus Owner's Manual
    PPoowweerrGGlliiddee CChhaassssiiss AAlllleeggrroo BBuuss OOwwnneerr’’ss MMaannuuaall Tiffin Motorhomes, Inc. 105 2nd Street NW Red Bay, AL 35582 U.S.A. Phone: (256) 356-8661 E-Mail: [email protected] [20111001] ALLEGRO BUS POWERGLIDE CHASSIS MANUAL Volume 2 TIFFIN MOTORHOMES,, INC.. 105 2nd Street NW Red Bay, Alabama 35582 U.S.A. PowerGlide® Owner’s Manual ALLEGRO BUS POWERGLIDE CHASSIS MANUAL TIFFIN MOTORHOMES, INC. Allegro Bus Chassis Owner’s Manual Tiffin Motorhomes, Inc. 105 2nd Street NW, Red Bay, AL 35582 U.S.A. Telephone 256.356.8661 • Facsimile 256.356.8219 E-Mail: [email protected] DISCLAIMER Many of the features and appliances described in this manual may or may not be reflected in the actual motor home purchased, depending on the options and models selected by the motorhome owner. All items, materials, instructions, and guidance described in this manual are as accurate as possible at the time of printing. However, because of Tiffin Motorhomes’ ongoing and dedicated commitment to excellence, improvement of Tiffin motorhomes is a continuing process. Consequently, Tiffin Motorhomes reserves the right to make substitutions and improvements in its makes and models of motorhomes without prior notification. Substitutions of comparable or better materials, finishes, appliances, instrumentation, and instruction may be made at any time it is deemed prudent to provide the customer with the best possible motorhome meeting the customer’s requirements. Copyright © 2011 by Tiffin Motorhomes, Inc. -- all rights reserved Printed in the United States of America: Fifth U.S. Printing: October 2011 [20111001] Allegro Bus Tiffin PowerGlide Chassis Customer Support 256-356-0261 Monday-Friday 7 a.m.
    [Show full text]
  • Mercedes Benz ABC Active Body Control Information Sheet Www
    Mercedes Benz ABC Active Body Control Information Sheet www.abcspecialist.nl Active Body Control, or ABC, is the Mercedes-Benz fully-active suspension system, that in real time controls the vehicle body motions and virtually eliminates body rol and vibrations in many driving situations including cornering, accelerating, and braking. Disclaimer ABCspecialist is a Dutch company specialized in hydraulic suspension systems. Since 2010 we sell all parts for the ABC system of Mercedes Benz from our stock exclusively for the business market. All the information on our websites, in our documents, advertisements and our communication has been compiled, written, and realized with the utmost care. Nevertheless, there is always the possibility that certain information will become obsolete over time, is no longer correct, or that errors have occurred during the translation. We have compiled the content with the utmost care, but cannot give any guarantees with regard to the content. No rights or liability can be dissected from information, prices, advice or any text in this document, on our website or in advertisements or communications, and ABCspecialist is not liable for the consequences of activities that are taken on this basis. Nothing from this document and our website will be reproduced or published without the prior written permission of ABCspecialist. Reading this document signifies your agreement to our terms and conditions. Work should only be performed by a trained mechanic else damage might be caused to the vehicle. The ABC system is working under a pressure of over 200 bar, taking the wrong installation steps can have serious consequences. You are responsible for studying the official service manual and the necessary safety proceedings that should be taken before working on, and raising the vehicle as when errors are made serious injuries and death can occur.
    [Show full text]
  • Uncertainties in Road Vehicle Suspensions Werner Schiehlen∗, Igor Iroz
    Available online at www.sciencedirect.com ScienceDirect Procedia IUTAM 13 ( 2015 ) 151 – 159 IUTAM Symposium on “Dynamical Analysis of Multibody Systems with Design Uncertainties” Uncertainties in road vehicle suspensions Werner Schiehlen∗, Igor Iroz Institute of Engineering and Computational Mechanics, University of Stuttgart, Pfaffenwaldring 9, 70569 Stuttgart, Germany Abstract Road vehicles are subject to random excitation by the unevenness of the road. For a dynamical analysis, vehicle models of the vertical vibrations as well as guideway models of the road unevenness are required. The fundamental dynamics of vehicle suspensions can be already modeled by a quarter car featuring the decoupling of the car body motion and the wheel motion. This suspension model is characterized by five design parameters where two of them, the shock absorber and the tire spring, are highly uncertain due to wear and poor maintenance. For the assessment of the vehicles performance three criteria have to be used: ride comfort, driving safety and suspension travel. These criteria depend on all the five design parameters resulting in a conflict or a pareto-optimal problem, respectively. In this paper, the uncertainties of the parameters are projected into a criteria space in order to support the decision to be made on the basis of a pareto-optimal problem. Simulations with uncertainties support the robust suspension design. It is shown that controlled suspension parameters remain uncertain due to the unpredictable decisions made by the driver. c 2015 The Authors. Published by Elsevier B.V. © 2015 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (Peer-reviehttp://creativecommons.org/licenses/by-nc-nd/4.0/w under responsibility of organizing committee).
    [Show full text]