SAA-· SULA L Fv/4
Total Page:16
File Type:pdf, Size:1020Kb
Number: AM0-321F GAC~ Date: 10 MAY 2018 l)li.~AII (JI;.WJ.l iU I cW:..eJ I G.enNal Au horlty ofCMI A ation This certificate is issued to TURK HAVA YOLLARI TEKNIK A.S., D/8/A: TURKISH TECHNIC INC. whose primary address and contact information is: SABIHA GOKCEN INTERNATIONAL AIRPORT ISTANBUL TURKEY Upon finding that its organization complies in all respects with the requirements of the General Authority of Civil Aviation Regulations relating to the establishment of an Air Agency, and is empowered to operate an approved Repair Station under GACAR Part 145 with the following ratings: Limited Airframe 10/05/2018 Limited Engines 10/05/2018 Limited Instrument, Limited Radio Limited Accessory, Limited Emergency Equipment Limited Landing Gear Components Limited Aircraft Painting 10/05/2018 Limited Nondestructive Inspection, Testing, and Processing subject to the conditions and limitations prescribed in the Operations Specifications. This certificate, unless cancelled, suspended, or revoked, shall continue in effect until 16 Apr 2019 This certificate is not transferable ges in the basic facilities, or in the location thereof, must be immediately reported to th approriat ffice of the General Authority of Civil Aviation. he President ............................ ......... ./L . .......................................... YASSIR Bl ANS R ALMAYOOF ASSISTANT P ESIDENT AVIATION STANDARDS GENERAL AUTHORITY OF CIVIL AVIATION KINGDOM OF SAUDI ARABIA GACA-SSAT_AW_C_8000-4_V.O (01 MARCH 2016) SAA-· SULA l fV/4. 6/ ~L f..ul ~ ,_,, Y ^GACA ijuaaJI qIj ■ t"!! General Authority ot Civil Aviation OPERATIONS SPECIFICATIONS Al. ISSUANCE AND APPLICABILITY, a. These operations specifications are issued to Turk Hava Yollari Teknik A.S., d/b/a/: TURKISH TECHNIC INC. a GACAR Part 145 repair station, certificate number, AMO-321F. The Repair Station Certificate holder shall conduct operations in accordance with GACAR Part 145 and these operations specifications at the location listed below. The certificate holder's address; Fixed Location: Mailing Address: TURKISH TECHNIC INC. TURKISH TECHNIC INC. Sabiha Gokcen International Airport Ataturk International Airport, Istanbul B Gate 34149 Yesilkoy .Istanbul Turkey Turkey b. These operations specifications are issued as part of this Repair Station Certificate, and are in effect as of the date signed by the President or his representative. This certificate and operations specifications shall remain in effect until the expiration date, surrendered by the operator, or terminated by the President, whichever comes first. Date Issued 04 JUN 2018 TURKISH TECHNIC INC. 145. AOOI -I Certificate No: AMO-321F ^GACA ^XaJI -jIj' 4_cLAjl ^ '.'0** General Authority of Civil Aviation OPERATIONS SPECIFICATIONS A3. RATINGS AND LIMITATIONS a. The certificate holder is authorized to perform maintenance, preventative maintenance and alterations under the limited ratings specified in Table 1 below subject to the provisions of GACAR Part 145 and the limitations specified: Table 1 - Limited Ratings Ratings Make Model Limitation A319-111 A319-112 A319-113 LIMITED TO PREVENTIVE A319-114 MAINTENANCE, MAINTENANCE UP-TO A319-115 AND INCLUDING C-CHECK IN Airframes AIRBUS A319-131 ACCORDANCE WITH CURRENT AIRCRAFT A319-132 MANUFACTURERS' MAINTENANCE A319-133 MANUALS, AIR OPERATOR'S MANUALS. A320-211 A320-214 A321-211 A330-343 LIMITED TO PREVENTIVE MAINTENANCE, MAINTENANCE UP-TO AND INCLUDING C-CHECK IN Airframes BOEING B777-268 ACCORDANCE WITH CURRENT AIRCRAFT MANUFACTURERS' MAINTENANCE MANUALS, AIR OPERATOR'S MANUALS. LIMITED TO PREVENTIVE MAINTENANCE, MINOR REPAIRS AND ENGINE REMOVAL/INSTALLATION IN Engines Rolls-Royce pic RB211 Trent 772B-60 ACCORDANCE WITH CURRENT AIRCRAFT MANUFACTURERS' MAINTENANCE MANUALS. ENGINE OVERHAUL IS EXCLUDED. Date Issued 04 JUN 2018 145. A003-1 TURKISH TECHNIC INC. Certificate No.: AMO-321F ^GACA ijuaaJI ijlj-i-taJJ 4-eLnJl4—ii*jl General Authority of Civil Aviation OPERATIONS SPECIFICATIONS Ratings Make Model Limitation LIMITED TO PREVENTIVE MAINTENANCE, MINOR REPAIRS AND ENGINE REMOVAL/INSTALLATION IN Engines CFMI CFM56-5B ACCORDANCE WITH CURRENT AIRCRAFT MANUFACTURERS' MAINTENANCE MANUALS. ENGINE OVERHAUL IS EXCLUDED. LIMITED TO PREVENTIVE MAINTENANCE, MINOR REPAIRS AND ENGINE REMOVAL/INSTALLATION IN Engines lAE V2500 ACCORDANCE WITH CURRENT AIRCRAFT MANUFACTURERS' MAINTENANCE MANUALS. ENGINE OVERHAUL IS EXCLUDED. LIMITED TO PREVENTIVE MAINTENANCE, MINOR REPAIRS AND ENGINE REMOVAL/INSTALLATION IN Engines GE GE90-90B ACCORDANCE WITH CURRENT AIRCRAFT MANUFACTURERS' MAINTENANCE MANUALS. ENGINE OVERHAUL IS EXCLUDED. LIMITED TO THE PERFORMANCE OF TESTING AND INSPEaiNG EACH INSTRUMENT INSTRUMENT INSTALLED ALTIMETER, STATIC INSTALLED ON INSTALLED ON SYSTEM, AND AUTOMATIC ALTITUDE Instrument AIRCRAFT LISTED AIRCRAFT LISTED REPORTING EQUIPMENT AS UNDER AIRFRAME UNDER AIRFRAME REQUIRED BY GACAR § 91.451. TESTS RATING RATING AND INSPECTIONS TO BE PERFORMED IN ACCORDANCE WITH GACAR PART 43, APPENDIX "D". LIMITED TO THE PERFORMANCE OF TESTING AND INSPECTING EACH RADIOS INSTALLED RADIOS INSTALLED INSTALLED ATC TRANSPONDER AS Radio ON AIRCRAFT ON AIRCRAFT REQUIRED BY GACAR § 91.453. TESTS LISTED UNDER LISTED UNDER AND INSPECTIONS TO BE PERFORMED AIRFRAME RATING AIRFRAME RATING IN ACCORDANCE WITH GACAR PART 43, APPENDIX "E". Date Issued 04 JUN 2018 145. A003-2 TURKISH TECHNIC INC. Certificate No.: AMO-321F B^GACA Qljj KU 4_flLflJla ii^JI General Authority of CIvil Aviation OPERATIONS SPECIFICATIONS RATINGS MAKE MODEL LIMITATIONS LIMITED TO THOSE ACCESSORIES LISTED IN TURKISH TECHNIC INC. FROM TURKISH FROM TURKISH COMPONENT CAPABILITY LIST (CCL) TECHNICINC. TECHNICINC (Document No.: FR.11.032) ISSUED ON Accessories COMPONENT COMPONENT MAY 31^ 2018, Revision No: 2018.01 CAPABILITY LIST CAPABILITY LIST AS REVISED AND ACCEPTED BY THE GACA. LIMITED TO THOSE EMERGENCY EQUIPMENT LISTED IN TURKISH Emergency FROM TURKISH FROM TURKISH TECHNICINC. COMPONENT Equipment TECHNICINC. TECHNICINC. CAPABILITY LIST (CCL)(Document No.: COMPONENT COMPONENT FR.11.032) ISSUED ON MAY 3U^, 2018, CAPABILITY LIST CAPABILITY LIST Revision No: 2018.01 AS REVISED AND ACCEPTED BY THE GACA. LIMITED TO THOSE Landing Gear Components LISTED IN TURKISH Landing Gear FROM TURKISH FROM TURKISH TECHNICINC. COMPONENT Components TECHNICINC. TECHNICINC. CAPABILITY LIST (CCL)(Document No.: COMPONENT COMPONENT FR.11.032) ISSUED ON MAY 31^', 2018, CAPABILITY LIST CAPABILITY LIST Revision No: 2018.01 AS REVISED AND ACCEPTED BY THE GACA. LIMITED TO AIRCRAFT PAINTING IN ACCORDANCE WITH CURRENT AIRBUS A320-214 AIRCRAFT MANUFACTURERS' Aircraft Painting BOEING A330-343 TECHNICAL MANUALS, AIR B777-268 OPERATOR'S MANUALS AND/OR APPROVED DATA ACCEPTABLE TO THE GACA. Date Issued 04JUN 2018 145. A003-3 TURKISH TECHNIC INC. Certificate No.: AMO-321F ^GACA ul>4-laJJ 4-oLsJlfl—1^1 General Authority of Civil Aviation OPERATIONS SPECIFICATIONS Ratings Make Model Limitations N/A N/A ■LIQUID PENETRANT INSPECTION:- Nondestructive I.A.W. ASTM-E165 OR AS OTHERWISE SPECIFIED Inspection, BY THE MANUFACTURER'S CURRENT TECHNICAL Testing, And DATA. Processing -MAGNETIC PARTICLE INSPECTION: I.A.W. ASTM-E-1444 OR AS OTHERWISE SPECIFIED BY THE MANUFACTURER'S CURRENT TECHNICAL DATA. -EDDY CURRENT TESTING: I.A.W. MIL-STD-1537C OR AS OTHERWISE SPECIFIED BY THE MANUFACTURER'S CURRENT TECHNICAL DATA. -ULTRASONIC INSPECTION: LAW. MIL-214 OR AS OTHERWISE SPECIFIED BY THE MANUFACTURER'S CURRENT TECHNICAL DATA. -RADIOGRAPHIC INSPECTION (RT): I.A.W. ASTM-E-1742 OR AS OTHERWISE SPECIFIED BY THE MANUFACTURER'S CURRENT TECHNICAL DATA. ALL NON-DESTRUCTIVE INSPECTION, TESTING, PROCESSING PERSONNEL MUST BE QUALIFIED AND CERTIFIED I.A.W. AIA-NAS-410 OR EN4179. ALL NON-DESTRUCTIVE INSPECTION, TESTING, AND PROCESSING LISTED, MUST BE ACCOMPLISHED IN ACCORDANCE WITH APPROPRIATE AND CURRENT DATA WHICH HAS BEEN APPROVED OR ACCEPTED BY THE GACA/FAA. Date Issued 04JUN2018 145. A003-4 TURKISH TECHNIC INC. Certificate No.: AMO-32IF ^GACA tjviA^I ulp-tall ''qII General Authority of Civil Aviation OPERATIONS SPECIFICATIONS b. The certificate holder is authorized to perform the following specialized services in Table 2 below in accordance with the specified specification and subject to the provisions of GACAR Part 145 and the limitations specified: Table 2 - Limited Ratings. Snecialixed Services 1 Special!^ Service Specification Limitations Non-Authorized 1 : % I- ■ '■■.'-■ j. ."4 •iiAr. Date Issued b4JUN2018 145. A003-5 TURKISH TECHNIC INC. Certificate No. : AMO-321F ^GACA i^xoJI cjl>,t,blJ 4 u^l General Authority of Civil Aviation OPERATIONS SPECIFICATIONS A6. MANAGEMENT AND DESIGNATED PERSONNEL a. The certificate holder is authorized the personnel listed in Table 1 below in the GACAR Part 145 required management and designated positions: Table 1 - Management and Designated Personnel GACA Position Title Name Company Equivalent Position Title Accountable Manager Ahmet KARAMAN Accountable Manager SMS Management Rep. SerefDEMIRCI Quality Manager(QMS & SMS) Repair Station Manager Huseyin SAGLAM Executive V.P.(Operation-1) Bilal KARAMAN (BASE-iST) Aircraft Maintenance Director (1ST) Person(s) in charge of maintenance (Base / Line) Erdem KOQ(BASE-SAW) Aircraft Maintenance Director(SAW) Levent KODAKOGLU (LINE) Line Maintenance Director Manager of Quality Birkan GUNERALP Quality Assurance Director Date Issued 04 JUN 2018 TURKISH TECHNIC INC. 145. A006-1 AMO-321F Reference No: AW/18/4229 ^GACA Attachment: H ovioJi Date. 12/Aug/2018 Autnofity of Ctvii Avmlion TO: MR. BIRKAN GUNERALP QUALITY ASSURANCE DIRECTOR TURKISH TECHNIC INC. SABIHA