Number : AM0-321F llGAC/X Date: 21 DEC 2017 U'o'.l.Allul~ CWlWI ~I Gf'nNotl Autnonly of Cr¥ 11 Avlauon
This certificate is issued to TURK HAVA YOLLARI TEKNIK A.S., 0/B/A: TURKISH TECHNIC INC. whose primary address and contact information is: SABIHA GOKCEN INTERNATIONAL AIRPORT ISTANBUL TURKEY Upon finding that its organization complies in all respects with the requirements of the General Authority of Civil Aviation Regulations relating to the establishment of an Air Agency, and is empowered to operate an approved Repair Station under GACAR Part 145 with the following ratings: Limited Airframe, Limited Engines Limited Emergency Equipment Limited Landing Gear Components Limited Accessory Limited Radio Limited Instrument Limited Aircraft Painting Limited Nondestructive Inspection, Testing, and Processing subject to the conditions and limitations prescribed in the Operations Specifications. This certificate, unless cancelled, suspended, or revoked, shall continue in effect until 16 Apr 2018 This certificate is not transferable and any changes in the basic facilities, or in the location thereof, must be immediately reported to the approriate office of the General Authority of Civil Aviation.
·rection of the President
ABDULLAH MUBARAK SH AL G.M. AIRWORTHINESS AVIATION STANDARDS GENERAL AUTHORITY OF CIVIL AVIATION KINGDOM OF SAUDI ARABIA
GACA-SSAT_AW_C_8000-4_V.O (01 MARCH 2016) llGAC~ vu~l ulu,.h.U ~lali OPERATIONS SPECIFICATIONS Al. ISSUANCE AND APPLICABILITY. a. These operations specifications are issued to Turk Hava Yollari Teknik A.S., d/b/a/ : TURKISH TECHNIC INC. a GACAR Part 145 repair station, certificate number, AM0-321F. The Repair Station Certificate holder shall conduct operations in accordance with GACAR Part 145 and these operations specifications at the location listed below. The certificate holder's address: Fixed Location: Mailing Address: TURKISH TECHNIC INC. TURKISH TECHNIC INC. Sabiha Gokcen International Airport Ataturk International Airport, Istanbul B Gate 34149 Yesilkoy ,Istanbul Turkey Turkey b. These operations specifications are issued as part of this Repair Station Certificate, and are in effect as of the date signed by the President or hi s representative. This certificate and operations specifications shall remain in effect until the expiration date, surrendered by the operator, or terminated by the President, whichever comes first. ***** Date Issued 21 DEC 2017 TURKISH TECHNIC INC. I45. AOO I - I Certificate No: AM0-32I F llGAC~ IJ'I.....Jiul~-l.aJI~ I c;.nttal Authotlty of CIVIl Avl•~on OPERATIONS SPECIFICATIONS A3. RATINGS AND LIMITATIONS a. The certificate holder is authorized to perform maintenance, preventative maintenance and alterations under the limited ratings specified in Table I below subject to the provisions of GACAR Part 145 and the limitations specified: Table 1 - Limited Ratin2s Ratings Make Model Limitation A319-111 A319-112 A319-113 LIMITED TO PREVENTIVE A319-114 MAINTENANCE, MAINTENANCE UP-TO A319-115 AND INCLUDING C-CHECK IN Airframes AIRBUS A319-131 ACCORDANCE WITH CURRENT AIRCRAFT A319-132 MANUFACTURERS' MAINTENANCE A319-133 MANUALS, AIR OPERATOR'S MANUALS. A320-211 A320-214 A321-211 LIMITED TO PREVENTIVE MAINTENANCE, MAINTENANCE UP-TO Airframes BOEING B777-268 AND INCLUDING C-CHECK IN ACCORDANCE WITH CURRENT AIRCRAFT MANUFACTURERS' MAINTENANCE MANUALS, AIR OPERATOR'S MANUALS. Date Issued 21 DEC 2017 145. A003-1 TURKISH TECHNlC INC. Certificate No. : AM0-321 F llGACt\ o.I".>.AJI uluJ<>.U ~LttJI '-1.\tJI G•n.,ll Authority of CIYII Avtatlon OPERATIONS SPECIFICATIONS Ratings Make Model Limitation LIMITED TO PREVENTIVE MAINTENANCE, MINOR REPAIRS AND ENGINE REMOVAL/INSTALLATION IN ACCORDANCE WITH CURRENT Engines CFMI CFM56-5B AIRCRAFT MANUFACTURERS' MAINTENANCE MANUALS. ENGINE OVERHAUL IS EXCLUDED. LIMITED TO PREVENTIVE MAINTENANCE, MINOR REPAIRS AND ENGINE REMOVAL/INSTALLATION IN Engines IAE V2500 ACCORDANCE WITH CURRENT AIRCRAFT MANUFACTURERS' MAINTENANCE MANUALS. ENGINE OVERHAUL IS EXCLUDED. LIMITED TO PREVENTIVE MAINTENANCE, MINOR REPAIRS AND ENGINE REMOVAL/INSTALLATION IN Engines GE GE90-90B ACCORDANCE WITH CURRENT AIRCRAFT MANUFACTURERS' MAINTENANCE MANUALS. ENGINE OVERHAUL IS EXCLUDED. LIMITED TO THE PERFORMANCE OF TESTING AND INSPECTING EACH INSTRUMENT INSTRUMENT INSTALLED ALTIMETER, STATIC INSTALLED ON INSTALLED ON SYSTEM, AND AUTOMATIC ALTITUDE Instrument AIRCRAFT LISTED AIRCRAFT LISTED REPORTING EQUIPMENT AS UNDER AIRFRAME UNDER AIRFRAME REQUIRED BY GACAR § 91.451. TESTS RATING RATING AND INSPECTIONS TO BE PERFORMED IN ACCORDANCE WITH GACAR PART 43, APPENDIX "D". LIMITED TO THE PERFORMANCE OF TESTING AND INSPECTING EACH RADIOS INSTALLED RADIOS INSTALLED INSTALLED ATC TRANSPONDER AS Radio ON AIRCRAFT ON AIRCRAFT REQUIRED BY GACAR § 91.453. TESTS LISTED UNDER LISTED UNDER AND INSPECTIONS TO BE PERFORMED AIRFRAME RATING AIRFRAME RATING IN ACCORDANCE WITH GACAR PART 43, APPENDIX "E". Date Issued 21 DEC 2017 145. A003-2 TURKJSH TECHNIC I C. Certificate o. : AM0-32 1F GACI\ IJII.>.AJI ulu.h!J ~1&11 "-lltJI Generol Authority of CIVIl A'tl!etlon OPERATIONS SPECIFICATIONS RATINGS MAKE MODEL LIMITATIONS LIMITED TO THOSE ACCESSORIES LISTED IN TURKISH TECHNIC INC. FROM TURKISH FROM TURKISH TECHNIC COMPONENT CAPABILITY LIST (CCL) Accessories TECHNIC INC. INC. COMPONENT (Document No.: FR.11.0008) ISSUED COMPONENT CAPABILITY LIST ON MAY 23'd, 2017, Revision No: CAPABILITY LIST 2017.02 AS REVISED AND ACCEPTED BY THE GACA. LIMITED TO THOSE EMERGENCY EQUIPMENT LISTED IN TURKISH Emergency FROM TURKISH FROM TURKISH TECHNIC INC. COMPONENT Equipment TECHNIC INC. TECHNIC INC. CAPABILITY LIST (CCL) (Document No.: COMPONENT COMPONENT FR.ll.OOOS) ISSUED ON MAY 23rd, CAPABILITY LIST CAPABILITY LIST 2017, Revision No: 2017.02 AS REVISED AND ACCEPTED BY THE GACA. LIMITED TO THOSE Landing Gear Components LISTED IN TURKISH Landing Gear FROM TURKISH FROM TURKISH TECHNIC INC. COMPONENT Components TECHNIC INC. TECHNIC INC. CAPABILITY LIST (CCL) (Document No.: COMPONENT COMPONENT FR.11.0008) ISSUED ON MAY 23'd, CAPABILITY LIST CAPABILITY LIST 2017, Revision No: 2017.02 AS REVISED AND ACCEPTED BY THE GACA. LIMITED TO AIRCRAFT PAINTING IN ACCORDANCE WITH CURRENT Aircraft Painting AIRBUS A320-214 AIRCRAFT MANUFACTURERS' BOEING B777-268 TECHNICAL MANUALS, AIR OPERATOR'S MANUALS AND/OR APPROVED DATA ACCEPTABLE TO THE GACA. Date Issued 21 DEC 2017 145. A003-3 TURKI SH TECHNIC INC. Certi ficate No. : AM0-321 F llGAC~ oJI'~Iul)ol.b.U "-"laJI ~I ....,_,al Autho OPERATIONS SPECIFICATIONS Ratings Make Model Limitations Nondestructive N/A N/A -LIQUID PENETRANT IN~PECTION : - I.A.W. ASTM-E165 OR AS OTHERWISE SPECIFIED Inspection, BY THE MANUFACTURER'S CURRENT TECHNICAL Testing, And DATA. Processing -MAGNETIC PARTICLE INSPECTION: I.A.W. ASTM- E-1444 OR AS OTHERWISE SPECIFIED BY THE MANUFACTURER'S CURRENT TECHNICAL DATA. -EDDY CURRENT TESTING: I.A.W. MIL-STD-1537C OR AS OTHERWISE SPECIFIED BY THE MANUFACTURER'S CURRENT TECHN ICAL DATA. -ULTRASONIC INSPECTIQN: LAW. MIL-214 OR AS OTHERWISE SPECIFIED BY THE MANUFACTURER'S CURRENT TECHNICAL DATA. -RAQIQ§RAPHI~ INSPECTIQN (RT): I.A.W. ASTM-E-1742 OR AS OTHERWISE SPECIFIED BY THE MANUFACTURER'S CURRENT TECHNICAL DATA. ALL NON-DESTRUCTIVE INSPECTION, TESTING, PROCESSING PERSONNEL MUST BE QUALIFIED AND CERTIFIED I.A.W. AIA-NAS-410 OR EN4179. ALL NON-DESTRUCTIVE INSPECTION, TESTING, AND PROCESSING LISTED, MUST BE ACCOMPLISHED IN ACCORDANCE WITH APPROPRIATE AND CURRENT DATA WHICH HAS BEEN APPROVED OR ACCEPTED BY THE GACA/FAA. Date Issued 21 DEC 2017 145. A003-4 TURKISH TECHNIC INC. Certificate No. : AM0-321 F llGAC~ IJIIWI ulu.bJJ OPERATIONS SPECIFICATIONS b. The certificate holder is authorized to perform the following specialized services in Table 2 below in accordance with the speci tied specification and subject to the provisions of GACAR Part 145 and the limitations specified: Table 2- Ljmjted Ratio2s. Specialized Seryjces Specialized Service Specification Limitations Non-Authorized ***** Date Issued 21 DEC 2017 145. A003-5 TURKISH TECHNIC I C. Certificate o. : AM0-321 F llGAC~ \J"~I ulu,.b.IJ OPERATIONS SPECIFICATIONS A6. MANAGEMENT AND DESIGNATED PERSONNEL a. The certificate holder is authorized the personnel li sted in Table I below in the GACAR Part 145 required management and designated positions: Table 1-Mauaeemept apd Desieoated Persoppel GACA Position Title Name Company Equivalent Position Title Accountable Manager Ahmet KARAMAN Accountable Manager SMS Management Rep. Mr. SerefDEMIRCI Quality Manager (QMS & SMS) Repair Station Manager HUseyin SAGLAM Executive V.P. (Operation-!) B1rkan GUNERALP (BASE-1ST) Aircraft Mamtenance D1rector (IST) Person(s) in charge of maintenance (Base I Line) Erdem KO<; (BASE-SAW) Aircraft Maintenance Director (SAW) Levent KODAKOGLU (LINE) Line Maintenance Director Manager of Quality Sadi OILER Quality Assurance Director ***** Date Issued 21 DEC 2017 TURKISH TECHNIC I C. 145. A006 -1 AM0-321F Reference No: AW/17/3356 GACA Attachment: 11 \J'II.\All vi}4hJJ "-DI.AJI TO: MR. SADI OiLER QUALITY ASSURANCE DIRECTOR SABIHA GOKCEN INTERNATIONAL AIRPORT ISTANBUL TURKEY Email: [email protected] SUBJECT: GACA R/S Certificate Renewal Without Physical Inspection AM0-321F Dear : MR. SADI OiLER QUALITY ASSURANCE DIRECTOR The enclosed Repair Station Certificate AM0·321F has been approved for one (1) year, valid until 16 Apr 2018 If you wish to continue to operate as a GACA approved repair station beyond the validity date of the current certificate, please submit the required items to this office 60 days prior to the expiration date. Please provide the fee payment confirmation with Company name and Repair Station number as follows: ATTN: SULAIMAN AL-HAZMI Chief Airworthiness Inspection Aviation Standards General Authority of Civil Aviation P.O.BOX 887, Jeddah -21165 Saudi Arabia FAX# 685-5745 Note: GACA-SS&AT has new websites on HYPERLINK: http://www.gaca.gov.sa FOR COURIER DELIVERY ADD: "KAIA-GACA NEW BUILDING" TO ADDRESS BELOW Please reply to : Fax# (966)(12) 685-5745 or Tel: (12) 685-5534 or 685-5324 General Authority of Civil Aviation - Safety,Security & Air Transport (GACA-SS&AT) P.O Box 887, Jeddah 21165, Kingdom of Saudi Arabia