Kill Orphan Rmsis Process

Total Page：16

File Type：pdf, Size：1020Kb

Kill Orphan RMsis Process On some (rare) occasions, the installer is not able to stop the Java Process related to the instance of RMsis already running on your system. For example, after RMsis upgrade, sometimes this issue is observed. Symptoms: You may see the following error: RMsis log files will have following error: com.optimizory.rmsis.plugin.exception.RMsisPluginException: An application is already running on port 3060. To fix this problem, either change the port for RMsis or close the application which is listening on port 3060. Steps to resolve this issue: 1. Stop JIRA. 2. Kill all processes related to JIRA / RMsis (they are typically named as Tomcat*, java). This is important because sometimes stopping JIRA does not terminate all the processes. On linux server, you can use the following commands a. List all java processes using: ps -ef | grep java b. Note down the process id of JIRA / RMsis processes from the output of above command. c. Use Kill command to kill the processes (related to JIRA / RMsis), if any. Example: kill -9 12345, where 12345 is the process ID. On Windows server, you can use the following commands a. Open a command prompt window (as Administrator) From "Start\Search box" Enter "cmd" then right-click on "cmd.exe" and select "Run as Administrator" b. Find Process ID of process that is using the port on which RMsis in configured to run (e.g. port:"3060") using: netstat -aon | find "3060" c. Note down the process id of the process d. Then Kill the process by Process ID: taskkill /F /PID 12345, where 12345 is the process ID. 3. Restart JIRA. 4. Try to access RMsis again. Sample run on *nix server: Sample run on windows server: Command References: ps: https://en.wikipedia.org/wiki/Ps_(Unix) netstat: https://en.wikipedia.org/wiki/Netstat kill & taskkill: https://en.wikipedia.org/wiki/Kill_(command) Related articles Kill Orphan RMsis Process.

Copy Link

Recommended publications

Many Slides Borrowed from Ben Zhao, Christo Wilson, & Others
12. Network Attacks Blase Ur and David Cash (many slides borrowed from Ben Zhao, Christo Wilson, & others) February 7th, 2020 CMSC 23200 / 33250 Network threat model • Network scanning • Attacks on confidentiality (e.g., eavesdropping) • Attacks on integrity (e.g., spoofing, packet injection) • Attacks on availability (e.g., denial of service (DoS)) Scanning and observing networks Network Scanning: Ping • Essential, low-level network utility • Sends a “ping” ICMP message to a host on the internet $ ping 66.66.0.255 PING 66.66.0.255 (66.66.0.255) 56(84) bytes of data. 64 bytes from 66.66.0.255: icmp_seq=1 ttl=58 time=41.2 ms • Destination host is supposed to respond with a “pong” – Indicating that it can receive packets • By default, ping messages are 56 bytes long (+ some header bytes) – Maximum size 65535 bytes • What if you send a ping that is >65535 bytes long? Ping of Death • $ ping –s 65535 66.66.0.255 – Attack identified in 1997 – IPv6 version identified/fixed in 2013 Network Scanning: Traceroute • traceroute — hops between me and host – Sends repeated ICMP reqs w/ increasing TTL Port Scanning • What services are running on a server? Nmap • 5 seconds to scan a single machine!! SYN scan Only send SYN Responses: • SYN-ACK — port open • RST — port closed • Nothing — filtered (e.g., firewall) Port Scanning on Steroids • How do you speed up scans for all IPv4? – Don’t wait for responses; pipeline – Parallelize: divide & conquer IPv4 ranges – Randomize permutations w/o collisions • Result: the zmap tool – Scan all of IPv4 in 45mins (w/ GigE cxn) – IPv4 in 5 mins w/ 10GigE Eavesdropping Tools: Wireshark, tcpdump, Bro, … Steps: 1.
[Show full text]
The Linux Command Line
The Linux Command Line Fifth Internet Edition William Shotts A LinuxCommand.org Book Copyright ©2008-2019, William E. Shotts, Jr. This work is licensed under the Creative Commons Attribution-Noncommercial-No De- rivative Works 3.0 United States License. To view a copy of this license, visit the link above or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042. A version of this book is also available in printed form, published by No Starch Press. Copies may be purchased wherever fine books are sold. No Starch Press also offers elec- tronic formats for popular e-readers. They can be reached at: https://www.nostarch.com. Linux® is the registered trademark of Linus Torvalds. All other trademarks belong to their respective owners. This book is part of the LinuxCommand.org project, a site for Linux education and advo- cacy devoted to helping users of legacy operating systems migrate into the future. You may contact the LinuxCommand.org project at http://linuxcommand.org. Release History Version Date Description 19.01A January 28, 2019 Fifth Internet Edition (Corrected TOC) 19.01 January 17, 2019 Fifth Internet Edition. 17.10 October 19, 2017 Fourth Internet Edition. 16.07 July 28, 2016 Third Internet Edition. 13.07 July 6, 2013 Second Internet Edition. 09.12 December 14, 2009 First Internet Edition. Table of Contents Introduction....................................................................................................xvi Why Use the Command Line?......................................................................................xvi
[Show full text]
Blue Coat SGOS Command Line Interface Reference, Version 4.2.3
Blue Coat® Systems ProxySG™ Command Line Interface Reference Version SGOS 4.2.3 Blue Coat ProxySG Command Line Interface Reference Contact Information Blue Coat Systems Inc. 420 North Mary Ave Sunnyvale, CA 94085-4121 http://www.bluecoat.com/support/contact.html [email protected] http://www.bluecoat.com For concerns or feedback about the documentation: [email protected] Copyright© 1999-2006 Blue Coat Systems, Inc. All rights reserved worldwide. No part of this document may be reproduced by any means nor modified, decompiled, disassembled, published or distributed, in whole or in part, or translated to any electronic medium or other means without the written consent of Blue Coat Systems, Inc. All right, title and interest in and to the Software and documentation are and shall remain the exclusive property of Blue Coat Systems, Inc. and its licensors. ProxySG™, ProxyAV™, CacheOS™, SGOS™, Spyware Interceptor™, Scope™, RA Connector™, RA Manager™, Remote Access™ are trademarks of Blue Coat Systems, Inc. and CacheFlow®, Blue Coat®, Accelerating The Internet®, WinProxy®, AccessNow®, Ositis®, Powering Internet Management®, The Ultimate Internet Sharing Solution®, Permeo®, Permeo Technologies, Inc.®, and the Permeo logo are registered trademarks of Blue Coat Systems, Inc. All other trademarks contained in this document and in the Software are the property of their respective owners. BLUE COAT SYSTEMS, INC. DISCLAIMS ALL WARRANTIES, CONDITIONS OR OTHER TERMS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, ON SOFTWARE AND DOCUMENTATION FURNISHED HEREUNDER INCLUDING WITHOUT LIMITATION THE WARRANTIES OF DESIGN, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL BLUE COAT SYSTEMS, INC., ITS SUPPLIERS OR ITS LICENSORS BE LIABLE FOR ANY DAMAGES, WHETHER ARISING IN TORT, CONTRACT OR ANY OTHER LEGAL THEORY EVEN IF BLUE COAT SYSTEMS, INC.
[Show full text]
NETSTAT Command
NETSTAT Command | NETSTAT Command | Use the NETSTAT command to display network status of the local host. | | ┌┐────────────── | 55──NETSTAT─────6─┤ Option ├─┴──┬────────────────────────────────── ┬ ─ ─ ─ ────────────────────────────────────────5% | │┌┐───────────────────── │ | └─(──SELect───6─┤ Select_String ├─┴ ─ ┘ | Option: | ┌┐─COnn────── (1, 2) ──────────────── | ├──┼─────────────────────────── ┼ ─ ──────────────────────────────────────────────────────────────────────────────┤ | ├─ALL───(2)──────────────────── ┤ | ├─ALLConn─────(1, 2) ────────────── ┤ | ├─ARp ipaddress───────────── ┤ | ├─CLients─────────────────── ┤ | ├─DEvlinks────────────────── ┤ | ├─Gate───(3)─────────────────── ┤ | ├─┬─Help─ ┬─ ───────────────── ┤ | │└┘─?──── │ | ├─HOme────────────────────── ┤ | │┌┐─2ð────── │ | ├─Interval─────(1, 2) ─┼───────── ┼─ ┤ | │└┘─seconds─ │ | ├─LEVel───────────────────── ┤ | ├─POOLsize────────────────── ┤ | ├─SOCKets─────────────────── ┤ | ├─TCp serverid───(1) ─────────── ┤ | ├─TELnet───(4)───────────────── ┤ | ├─Up──────────────────────── ┤ | └┘─┤ Command ├───(5)──────────── | Command: | ├──┬─CP cp_command───(6) ─ ┬ ────────────────────────────────────────────────────────────────────────────────────────┤ | ├─DELarp ipaddress─ ┤ | ├─DRop conn_num──── ┤ | └─RESETPool──────── ┘ | Select_String: | ├─ ─┬─ipaddress────(3) ┬ ─ ───────────────────────────────────────────────────────────────────────────────────────────┤ | ├─ldev_num─────(4) ┤ | └─userid────(2) ─── ┘ | Notes: | 1 Only ALLCON, CONN and TCP are valid with INTERVAL. | 2 The userid
[Show full text]
Command-Line IP Utilities This Document Lists Windows Command-Line Utilities That You Can Use to Obtain TCP/IP Configuration Information and Test IP Connectivity
Guide to TCP/IP: IPv6 and IPv4, 5th Edition, ISBN 978-13059-4695-8 Command-Line IP Utilities This document lists Windows command-line utilities that you can use to obtain TCP/IP configuration information and test IP connectivity. Command parameters and uses are listed for the following utilities in Tables 1 through 9: ■ Arp ■ Ipconfig ■ Netsh ■ Netstat ■ Pathping ■ Ping ■ Route ■ Tracert ARP The Arp utility reads and manipulates local ARP tables (data link address-to-IP address tables). Syntax arp -s inet_addr eth_addr [if_addr] arp -d inet_addr [if_addr] arp -a [inet_address] [-N if_addr] [-v] Table 1 ARP command parameters and uses Parameter Description -a or -g Displays current entries in the ARP cache. If inet_addr is specified, the IP and data link address of the specified computer appear. If more than one network interface uses ARP, entries for each ARP table appear. inet_addr Specifies an Internet address. -N if_addr Displays the ARP entries for the network interface specified by if_addr. -v Displays the ARP entries in verbose mode. -d Deletes the host specified by inet_addr. -s Adds the host and associates the Internet address inet_addr with the data link address eth_addr. The physical address is given as six hexadecimal bytes separated by hyphens. The entry is permanent. eth_addr Specifies physical address. if_addr If present, this specifies the Internet address of the interface whose address translation table should be modified. If not present, the first applicable interface will be used. Pyles, Carrell, and Tittel 1 Guide to TCP/IP: IPv6 and IPv4, 5th Edition, ISBN 978-13059-4695-8 IPCONFIG The Ipconfig utility displays and modifies IP address configuration information.
[Show full text]
SUSE Linux Enterprise Server 11 SP4 System Analysis and Tuning Guide System Analysis and Tuning Guide SUSE Linux Enterprise Server 11 SP4
SUSE Linux Enterprise Server 11 SP4 System Analysis and Tuning Guide System Analysis and Tuning Guide SUSE Linux Enterprise Server 11 SP4 Publication Date: September 24, 2021 SUSE LLC 1800 South Novell Place Provo, UT 84606 USA https://documentation.suse.com Copyright © 2006– 2021 SUSE LLC and contributors. All rights reserved. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or (at your option) version 1.3; with the Invariant Section being this copyright notice and license. A copy of the license version 1.2 is included in the section entitled “GNU Free Documentation License”. For SUSE trademarks, see http://www.suse.com/company/legal/ . All other third party trademarks are the property of their respective owners. A trademark symbol (®, ™ etc.) denotes a SUSE or Novell trademark; an asterisk (*) denotes a third party trademark. All information found in this book has been compiled with utmost attention to detail. However, this does not guarantee complete accuracy. Neither SUSE LLC, its aliates, the authors nor the translators shall be held liable for possible errors or the consequences thereof. Contents About This Guide xi 1 Available Documentation xii 2 Feedback xiv 3 Documentation Conventions xv I BASICS 1 1 General Notes on System Tuning 2 1.1 Be Sure What Problem to Solve 2 1.2 Rule Out Common Problems 3 1.3 Finding the Bottleneck 3 1.4 Step-by-step Tuning 4 II SYSTEM MONITORING 5 2 System Monitoring Utilities 6 2.1 Multi-Purpose Tools 6 vmstat 7
[Show full text]
System Analysis and Tuning Guide System Analysis and Tuning Guide SUSE Linux Enterprise Server 15 SP1
SUSE Linux Enterprise Server 15 SP1 System Analysis and Tuning Guide System Analysis and Tuning Guide SUSE Linux Enterprise Server 15 SP1 An administrator's guide for problem detection, resolution and optimization. Find how to inspect and optimize your system by means of monitoring tools and how to eciently manage resources. Also contains an overview of common problems and solutions and of additional help and documentation resources. Publication Date: September 24, 2021 SUSE LLC 1800 South Novell Place Provo, UT 84606 USA https://documentation.suse.com Copyright © 2006– 2021 SUSE LLC and contributors. All rights reserved. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or (at your option) version 1.3; with the Invariant Section being this copyright notice and license. A copy of the license version 1.2 is included in the section entitled “GNU Free Documentation License”. For SUSE trademarks, see https://www.suse.com/company/legal/ . All other third-party trademarks are the property of their respective owners. Trademark symbols (®, ™ etc.) denote trademarks of SUSE and its aliates. Asterisks (*) denote third-party trademarks. All information found in this book has been compiled with utmost attention to detail. However, this does not guarantee complete accuracy. Neither SUSE LLC, its aliates, the authors nor the translators shall be held liable for possible errors or the consequences thereof. Contents About This Guide xii 1 Available Documentation xiii
[Show full text]
Cisco SD-WAN Command Reference Americas Headquarters Cisco Systems, Inc
Cisco SD-WAN Command Reference Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS" WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
[Show full text]
Introduction to Computer Networking
www.PDHcenter.com PDH Course E175 www.PDHonline.org Introduction to Computer Networking Dale Callahan, Ph.D., P.E. MODULE 7: Fun Experiments 7.1 Introduction This chapter will introduce you to some networking experiments that will help you improve your understanding and concepts of networks. (The experiments assume you are using Windows, but Apple, Unix, and Linux systems will have similar commands.) These experiments can be performed on any computer that has Internet connectivity. The commands can be used from the command line using the command prompt window. The commands that can be used are ping, tracert, netstat, nslookup, ipconfig, route, ARP etc. 7.2 PING PING is a network tool that is used on TCP/IP based networks. It stands for Packet INternet Groper. The idea is to verify if a network host is reachable from the site where the PING command issued. The ping command uses the ICMP to verify if the network connections are intact. When a PING command is issued, a packet of 64 bytes is sent to the destination computer. The packet is composed of 8 bytes of ICMP header and 56 bytes of data. The computer then waits for a reply from the destination computer. The source computer receives a reply if the connection between the two computers is good. Apart from testing the connection, it also gives the round trip time for a packet to return to the source computer and the amount of packet loss [19]. In order to run the PING command, go to Start ! Run and in the box type “cmd”.
[Show full text]
The Evolution of Gandcrab Ransomware
The Evolution of GandCrab Ransomware Tamas Boczan @tamas_boczan Sr. Threat Analyst Why? Why? Why? Business Model: RaaS Panel for Affiliates Mass Delivery Methods • Email attachments - Javascript - Doc - Encrypted doc • Drive- by download Delivery: RDP, Exploits Payload: Starting Point Data collection • System Info • External IP • AV? Payload: Starting Point Data collection Connect Home • System Info • nslookup • External IP • AV? Payload: Starting Point Data collection Connect Home Preparation • System Info • nslookup • Kill Processes • External IP • AV? Payload: Starting Point Data collection Connect Home Preparation Encryption • System Info • nslookup • Kill Processes • AES • External IP • *.GDCB • AV? Payload: Starting Point Data collection Connect Home Preparation Encryption Post-Infection • System Info • nslookup • Kill Processes • AES • Shadow Copies • External IP • *.GDCB • AV? Feb 28: Europol decryptor Data collection Connect Home Preparation Encryption Post-Infection • System Info • nslookup • Kill Processes • AES • Shadow Copies • External IP • *.GDCB • AV? 7 days later: v2 Data collection Connect Home Preparation Encryption Post-Infection • System Info • nslookup • Kill Processes • AES • Shadow Copies • External IP • *.CRAB • AV? • Kernel-AV 7 weeks later: v3 Post-Infection • Shadow Copies • Wallpaper v4 Data collection Connect Home Preparation Encryption Post-Infection • System Info • nslookup • Kill Processes • AES • Shadow Copies • External IP • Salsa • Wallpaper • AV? • *.KRAB • Self-removal • SMB shares v4.1 Data collection
[Show full text]
Freebsd Command Reference
FreeBSD command reference Command structure Each line you type at the Unix shell consists of a command optionally followed by some arguments , e.g. ls -l /etc/passwd | | | cmd arg1 arg2 Almost all commands are just programs in the filesystem, e.g. "ls" is actually /bin/ls. A few are built- in to the shell. All commands and filenames are case-sensitive. Unless told otherwise, the command will run in the "foreground" - that is, you won't be returned to the shell prompt until it has finished. You can press Ctrl + C to terminate it. Colour code command [args...] Command which shows information command [args...] Command which modifies your current session or system settings, but changes will be lost when you exit your shell or reboot command [args...] Command which permanently affects the state of your system Getting out of trouble ^C (Ctrl-C) Terminate the current command ^U (Ctrl-U) Clear to start of line reset Reset terminal settings. If in xterm, try Ctrl+Middle mouse button stty sane and select "Do Full Reset" exit Exit from the shell logout ESC :q! ENTER Quit from vi without saving Finding documentation man cmd Show manual page for command "cmd". If a page with the same man 5 cmd name exists in multiple sections, you can give the section number, man -a cmd or -a to show pages from all sections. man -k str Search for string"str" in the manual index man hier Description of directory structure cd /usr/share/doc; ls Browse system documentation and examples. Note especially cd /usr/share/examples; ls /usr/share/doc/en/books/handbook/index.html cd /usr/local/share/doc; ls Browse package documentation and examples cd /usr/local/share/examples On the web: www.freebsd.org Includes handbook, searchable mailing list archives System status Alt-F1 ..
[Show full text]
System Calls & Signals
CS345 OPERATING SYSTEMS System calls & Signals Panagiotis Papadopoulos [email protected] 1 SYSTEM CALL When a program invokes a system call, it is interrupted and the system switches to Kernel space. The Kernel then saves the process execution context (so that it can resume the program later) and determines what is being requested. The Kernel carefully checks that the request is valid and that the process invoking the system call has enough privilege. For instance some system calls can only be called by a user with superuser privilege (often referred to as root). If everything is good, the Kernel processes the request in Kernel Mode and can access the device drivers in charge of controlling the hardware (e.g. reading a character inputted from the keyboard). The Kernel can read and modify the data of the calling process as it has access to memory in User Space (e.g. it can copy the keyboard character into a buffer that the calling process has access to) When the Kernel is done processing the request, it restores the process execution context that was saved when the system call was invoked, and control returns to the calling program which continues executing. 2 SYSTEM CALLS FORK() 3 THE FORK() SYSTEM CALL (1/2) • A process calling fork()spawns a child process. • The child is almost an identical clone of the parent: • Program Text (segment .text) • Stack (ss) • PCB (eg. registers) • Data (segment .data) #include <sys/types.h> #include <unistd.h> pid_t fork(void); 4 THE FORK() SYSTEM CALL (2/2) • The fork()is one of the those system calls, which is called once, but returns twice! Consider a piece of program • After fork()both the parent and the child are ..
[Show full text]