DOCSLIB.ORG

Repair Parts Sheet Hydraulic Torque Wrenches W2000SL

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Repair Parts Sheet Hydraulic Torque Wrenches W2000SL Repair Parts Sheet POWERFUL SOLUTIONS. GLOBAL FORCE. Hydraulic Torque Wrenches W2000SL UltraSlim Series L4117 Rev. A 01/15 To Protect Your Warranty, Use Only ENERPAC Hydraulic Oil. Enerpac recommends that all kit components be installed to insure optimum performance of the repaired product. Contents: Pages Figure 1, Cassette Assembly . 2-3 Figure 2, Ratchet Assembly and Sideplates . 4 Figure 3, Carrying Case . .. 5 Figure 4, Drive Unit and Swivel Assemblies . 6-7 Note: Refer to the wrench instruction sheet for: • Inspection, lubrication and maintenance instructions . • Torque specifications for selected fasteners . 11 10 20 13 9 22 2 12 20 24 23 19 19 15 1 14 8 20 14 14 3 7 17 25 14 26 21 18 16 18 6 18 18 4 5 26 SWH6A Angled Positioning Handle 27 (optional accessory) 29 28 30 Figure 1, Cassette Assembly, W2000SL Series 2 Repair Parts List for Figure 1 Quantity (included in each kit) Part Item Description Number Kit, UltraSlim Item available Item ) Quantity (used on wrench) ✲ Sideplate Kit, LH and RH Sideplate and Pin Kit Ratchet Lever Ratchet and Drive Shoe Kit Drive Shoe Kit Head Guard Safe Link Kit Kit Hardware Cassette Head Spacer Kit Handle Kit Angled Positioning W2000SLHGK (see Figure 2 for kit details) (see Figure 2 for kit details) (see Figure 2 for kit details) (see Figure 2 for kit details) W2000SLKB W2000CHKB W2000HSK SWH6A (optional) separately OR in kit. separately ( 1 (Not Available) 1 Cylinder Locating Plate 2 (See Figure 2) 1 1 Sideplate, Right-Hand 3 (See Figure 2) 1 1 Sideplate, Left-Hand 4 (See Figure 2) 1 1 Ratchet Lever 5 (See Figure 2) 1 1 ✲ Ratchet 6 (See Figure 2) 1 1 1 Drive Shoe 7 W2000SL117 1 1 Guard, Rear 8 W2000SL116 1 1 Guard, Front 9 (Not Available) 1 Pin Retainer 10 2000110A 1 1 ✲ Spacer Retaining Pin 11 2000109A 1 1 Cylinder Retaining Pin 12 2000114A 1 Reaction Foot 13 2000115 1 1 Fail Safe Pin 14 2000113A 4 4 Sideplate Spacer 15 CCA417057-2A 1 1 Pin, Spirol Spring, Compression 16 E3074K 1 1 1 1 ✲ (packet of 10) 17 CBA411028-1E 2 2 2 Screw, Button Head 18 2000129 4 4 4 Screw, Shoulder, Modified 19 E4574 2 2 2 Spring, Plunger Pin, Spirol Spring 20 CCA527057-2A 3 3 ✲ (packet of 10) 21 E4844 1 1 1 Pin, Spirol Spring 22 E4728 1 1 Ball Detent 23 CBA519028-1E 1 1 1 Screw, Button Head 24 E3083 1 1 Spring, Compression 25 CAE1040108-1A 2 2 2 Washer, Flat 26 SL100154 2 2 Nameplate, Enerpac 27 SWH6S 1 Positioning Handle, Straight 28 DM0341070 1 1 Positioning Handle, Angled 29 DM0309147 1 1 Thumbscrew 30 E2393 1 1 O-Ring Notes: • Enerpac recommends that all kit components be installed to assure optimum performance of the repaired product . • Items 16 and 20: Packet quantity is provided only when item is ordered separately and not included in a kit. 3 Note: This view contains only ratchet and sideplate parts . • Refer to Figure 2 repair parts list (see below) for ratchet and sideplate parts kit information . • Refer to Figure 1 on pages 2 and 3 for the main parts list and a complete exploded view of all cassette parts . 2 3 21 16 6 4 5 Note: Refer to the wrench instruction sheet for: • Inspection, lubrication and maintenance instructions . • Torque specifications for selected fasteners . Figure 2, Ratchet Assembly and Sideplates, W2000SL Series Repair Parts List for Figure 2 Size Part Numbers Ratchet Only Drive Shoe Ratchet and Ratchet Lever Sideplate Kit Cassette Kit Drive Shoe Kit and Pin Kit LH and RH Model Inch mm (Figure 2, (Figure 2, (Figure 2, item 5) (Figure 2, (Figure 2, items 4 & 21) items 2 and 3) items 6 & 16) items 5, 6 & 16) W2113SL 1 13/16 46 W2000SL121113 W2113SLDSK W2113SLRK W2000SL120113A W2000SL175113A W2203SL 2 3/16 55 W2000SL121203 W2203SLDSK W2203SLRK W2000SL120203A W2000SL175203A W2206SL 2 3/8 60 W2000SL121206 W2206SLDSK W2206SLRK W2000SL120206A W2000SL175206A Note: Enerpac recommends that all kit and subassembly components be installed to assure optimum performance of the repaired product . 4 1, 2 Figure 3, Carrying Case, W2000 Series (typical - appearance may vary) Repair Parts List for Figure 3 Item Part Number Qty. Description 1 DD1362530 1 Carrying Case, Drive Unit, W2000 Series 2 DD1377530 1 Carrying Case, Cassette, W2000 Series 5 9 10 11 3 16 13 5 19 15 6 21 17 18 8 20 7 14 12 2 1 23 4 22 TSP 100 Swivel Assembly (used on W2000P) 24 Notes: 25 • Refer to page 7 for parts kit information . 27 • Drive units with model numbers ending in “P” are factory equipped with the TSP100 28 Swivel Assembly . 25 Refer to the wrench instruction sheet for: • Inspection, lubrication and maintenance instructions . 26 • Torque specifications for selected fasteners . (optional - replaces item 8) Figure 4, Drive Unit and Swivel Assemblies, W2000 6 Repair Parts List for Figure 4 Quantity (used on Quantity (included in each kit) drive unit) Item Part Number Description Model W2000 Model W2000P Item available separately OR in kit. available separately Item ) ✲ ( Drive Unit Seal Kit W2000SK Link Kit Retract W2000RLK Drive Unit Rebuild Kit W2000DRK Swivel Manifold Seal Kit W2000SMSK and Manifold Kit Swivel Post Swivel) Standard W2000SMK (For Swivel Manifold Kit Swivel) TSP100 (For TSP100A and Manifold Kit Swivel Post Swivel) TSP100 (For TSP100MK 1 (Not Available) 1 1 Cylinder Body (housing) 2 2000106A 1 1 1 Cylinder Bushing 3 2000104 1 1 1 Piston Rod 4 2000105 1 1 1 Retract Link 5 2000103 1 1 1 Piston 6 2000102 1 1 1 Cylinder Gland 7 1000S004 1 1 1 1 ✲ Swivel Manifold Post (small) 8 1000S003 1 - - - 1 ✲ Swivel Manifold Block (non-tilt) 9 TR630 1 1 1 1 Coupling, 10,000 PSI Screw-On 10 FZ1608 1 1 1 1 Adaptor, Hex 10,000 PSI 11 TH630 1 1 1 1 Nipple, 10,000 PSI Screw-On 12 E2334 1 1 1 Seal, Rod 13 E2314 1 1 1 Seal, T-Piston w/Back Up Rings O-Ring 14 E2304K 2 2 2 2 2 2 ✲ (packet of 10) 15 E2316 1 1 1 O-Ring 16 E2237 1 1 1 O-Ring 17 E2239 2 2 2 2 2 2 2 O-Ring 18 E2237 1 1 1 1 1 1 1 O-Ring 19 E4578 1 1 1 Screw, Button Head 20 E4598 4 4 4 4 Swivel Manifold Retaining Bolt 21 E4017 1 1 1 1 1 1 1 Retainer Ring, Circlip 22 E4577 1 1 1 Pin, Spirol Spring Spring, Compression 23 E3074K 1 1 1 ✲ (packet of 5) 24 1000S009 - - - 1 1 1 Swivel Arm, Pressure A 25 E2173 - - - 4 4 4 4 O-Ring, Double Swivel 26 1000S011 - - - 1 1 1 Manifold Block, Double Swivel 27 E4650 - - - 1 1 1 1 Capscrew, Swivel Arm 28 1000S010 - - - 1 1 1 Swivel Arm, Return B Notes: • Enerpac recommends that all kit components be installed to assure optimum performance of the repaired product. • Items 14 and 23: Packet quantity is provided only when item is ordered separately and not included in a kit. 7 Enerpac Worldwide Locations e-mail: [email protected] internet: www.enerpac.com Australia and New Zealand India South Korea South Africa and other English Actuant Australia Ltd. ENERPAC Hydraulics (India) Pvt. Ltd. Actuant Korea Ltd. speaking African countries Block V Unit 3 No. 10, Bellary Road, Sadashivanagar, 3Ba 717, Shihwa Industrial Complex Enerpac Africa Pty Ltd. Regents Park Estate Bangalore, Karnataka 560 080 Jungwang-Dong, Shihung-Shi, No. 5 Bauhinia Avenue 391 Park Road India Kyunggi-Do Cambridge O¨ce Park Regents Park NSW 2143 T +91 80 3928 9000 Republic of Korea 429-450 Block E (P.O. Box 261) Australia [email protected] T +82 31 434 4506 Highveld Techno Park T +61 (0)2 9743 8988 www.enerpac.com F +82 31 434 4507 Centurion 0157 F +61 (0)2 9743 8648 [email protected] Republic of South Africa [email protected] Italy T: +27 12 940 0656 ENERPAC S.p.A. Spain and Portugal [email protected] Brazil Via Canova 4 ENERPAC SPAIN, S.L. Power Packer do Brasil Ltda. 20094 Corsico (Milano) Avda. Los Frailes, 40 – Nave C & D United Kingdom and Ireland Rua Luiz Lawrie Reid, 548 T +39 02 4861 111 Pol. Ind. Los Frailes ENERPAC UK Ltd. 09930-760 - Diadema (SP) - Brazil F +39 02 4860 1288 28814 Daganzo de Arriba 5 Coopies Field T +55 11 5687 2211 [email protected] (Madrid) Spain Morpeth, Northumberland Toll Free: 0800 891 5770 T +34 91 884 86 06 NE61 6JR, England [email protected] Japan F +34 91 884 86 11 T +44 (0) 1670 5016 50 Applied Power Japan LTD KK [email protected] F +44 (0) 1670 5016 51 China (Taicang) Besshocho 85-7 [email protected] Actuant (China) Industries Co. Ltd. Kita-ku, Saitama-shi 331-0821, Japan Sweden, Denmark, Norway, No. 6 Nanjing East Road, T +81 48 662 4911 Finland and Iceland USA, Latin America and Caribbean Taicang Economic Dep Zone F +81 48 662 4955 Enerpac Scandinavia AB ENERPAC World Headquarters Jiangsu, China [email protected] Kopparlundsvägen 14, P.O. Box 3241 T +86 0512 5328 7500 721 30 Västerås Milwaukee WI 53201-3241 USA F +86 0512 5335 9690 Middle East, Egypt and Libya Sweden N86 W12500 Westbrook Crossing Toll Free: +86 400 885 0369 ENERPAC Middle East FZE T +46 (0) 771 41 50 00 Menomonee Falls, Wisconsin 53051 [email protected] O¨ce 423, LOB 15 [email protected] T +1 262 293 1600 P.O.
Load more

Recommended publications
  • Manual Valves Repair Parts Sheet to Protect Your Warranty
    Repair Parts Sheet Manual Valves L1257 Rev. J 09/13 For Date Codes Beginning with the Letters “B” and “C” To Protect Your Warranty, Use Only ENERPAC Hydraulic Oil. Enerpac recommends that all kit components be installed to insure optimum performance of the repaired product. Figure 1, Main Assembly 1 Apply Loctite 222 2 3 18 4 19 5 20 6 19 7 8 Torque item 7 to 28-34 ft. lbs. 22 [38-46 Nm] 9 23 TANK 25 24 10 11 26 12 30 28 13 14 27 15 16 17 29 28 Torque to 72-96 in. lbs. [8-11 Nm] Torque to 11-13 ft. lbs. [15-18 Nm] Identification - Early Production Manual Valves Early production manual valves contain both a valve code letter and valve code number. This letter and number are used to identify the valve model. See Table A. Example: Location of Code Letter ENERPAC X CBxxx.900 CxxxxC Date Code Location of Code Number Table A - Valve Code Chart - Early Production Manual Valves Model Previous Valve Code Equivalent Present Disc Model Previous Valve Code Equivalent Present Disc Number Valve Code Assembly Number Valve Code Assembly Letter Number Letter Number Example: Number Fig. 1, Item 16 Number Fig. 1, Item 16 (see Table B) (see Table B) ENERPAC VM-4 A CB317900 4-O-P-B-O CH542950 VM-3 G CB318900 3-O-P-B-O CH538950 Code Number Date Code VC-4 B CB317900 X-X-X-X-X 4-O-R-B-OCxxxxC CH542950 VC-3 H CB318900 3-O-R-B-O CH538950 VM-4L C CB317900 4-O-P-B-X CH542950 VC-20 I CB319900 4-C-R-B-O CH537950 VC-4L D CB317900 4-O-R-B-X CH542950 VC-20L J CB319900 4-C-R-B-X CH537950 VM-3LExample:E CB317900 3-O-P-B-X CH542950 VC-15L K CB319900 3-C-R-B-X CH537950 VC-3L F CB317900 3-O-R-B-X CH542950Location ofVC-15 Code LetteL r CB320900 3-C-R-B-O CH541950 ENERPAC X CBxxx.900 CxxxxC Date Code Location of Code Number Identification - Recent Production Manual Valves Recent production manual valves contain an alphanumeric valve code number.
    [Show full text]
  • Repair Parts Sheet
    Repair Parts Sheet POWERFUL SOLUTIONS. GLOBAL FORCE. Turbo II Air Pumps L2533 Rev. L 07/15 For Date Codes Beginning with the Letters “C”, “D” and “E” To Protect Your Warranty, Use Only ENERPAC Hydraulic Oil. Enerpac recommends that all kit components be installed to insure optimum performance of the repaired product. Note: Storing the pump in the vertical position may cause it to lose its prime. If pump loses its prime: 1. Remove cover. 2. Remove relief valve. 3. Fill chamber with oil. 4. Apply Loctite 545 to threads and torque to 10-12 ft-lbs. [14-16 Nm]. 5. Replace pump cover. See Figure 1 for gasket orientation detail and cover screw torquing sequence. ® TURBOII Contents: Figure 1 — Treadle Assembly, T Version ..................................2 Figure 7 — Air Motor Assembly ...............................................8 Figure 2 — Treadle Assembly, M, C, S Version ........................3 Figure 8 — Release Valve .........................................................9 Figure 2a & 2b – Handle Assembly, R Version .........................4 Figure 9 — Manual Valve ........................................................10 Figure 3 — Cover Assembly .....................................................5 Figure 10 — Pump Manifolds, PAS Version ...........................11 Figure 4 — Hydraulic Section Detail.........................................6 Figure 11 — Pump Manifold, PAC Version .............................11 Figure 5 — Seal Push Tool .......................................................7 Table 1 — Relief Valve Setting
    [Show full text]
  • Repair Parts Sheet Hydraulic Nut Splitters, NC-1319, NC
    Repair Parts Sheet ® Hydraulic Nut Splitters, NC-1319, NC-1924, NC-2432, NC-3241, NC-4150, NC-5060, NC-6075 L1456 Rev. C 12/04 For Date Codes Beginning with the Letter A To Protect Your Warranty, Use Only ENERPAC Hydraulic Oil. Enerpac recommends that all kit components be installed to insure optimum performance of the repaired product. 1 2 4 5 3 6 8 7 9 10 Repair Parts List for Figure 1 Item Part NumberQty. Description NC1319 NC1924 NC2432 NC3241 NC4150 NC5060 NC6075 1 N/A N/A N/A N/A N/A N/A N/A Not sold separately 2 Std. Hardware 1 M8x1.25x10 Screw Std. Hardware 1 M10x1.25x10 Screw Std. Hardware Std. Hardware Std. Hardware 1 M12x1.75x10 Screw Std. Hardware Std. Hardware 1 M14x2x18 Screw 3 DC6532110 DC6533110 DC6534110 DC6535110 DC6536110 DC6537110 DC6538110 1 Spring 4 NCB1319 NCB1924 NCB2432 NCB3241 NCB4150 NCB5060 NCB6075 1 Moving Blade 5 DC6539013 DC6540013 DC6541013 DC6542013 DC6543013 DC6544013 DC6545013 1 Guide Block 6 Std. Hardware 1 M5x0.8x4 Screw Std. Hardware 1 M6x1x6 Screw Std. Hardware Std. Hardware Std. Hardware 1 M8x1.25x6 Screw Std. Hardware Std. Hardware 1 M10x1.5x12 Screw 7 DC6546040 DC6547040 DC6548040 DC6549040 DC6550040 DC6551040 DC6552040 1 Main Piston 8 DC6553503 DC6554503 DC6555503 DC6556503 DC6557503 DC6558503 DC6559503 1 O-Ring 9 DC6560030 DC6561030 DC6562030 DC6563030 DC6564030 DC6565030 DC6566030 1 Cylinder 10 CR400 CR400 CR400 CR400 CR400 CR400 CR400 1 Coupler ❚ DC6567816 1 2.5 mm T-Handle Wrench ❚ DC6568816 13 mm T-Handle Wrench ❚ DC6569816 DC6569816 DC6569816 DC6569816 1 4 mm T-Handle Wrench ❚ DC6570816 DC6570816 DC6570816 1 5 mm T-Handle Wrench ❚ DC6571816 DC6571816 DC6571816 DC6571816 DC6571816 1 6 mm T-Handle Wrench ❚ DC6572530 DC6572530 DC6573530 DC6573530 DC6574530 DC6574530 DC6575530 1 Case ❚ Not shown.
    [Show full text]
  • E321e-HFT Catalog
    E321e ® A UNIT OF APPLIED POWER ® Hydraulic Power for all Industrial Applications Hydraulic Power for all Industrial Applications E321e ® ® Table of Contents Hydraulic Technology Worldwide H Introduction PAM-2000-Series, For your Safety and Basic Air Hydraulic Pumps ...................................... 88-89 Hydraulic Information, see our The World of Enerpac ................................................... 4 PGM-Series, new ‘Yellow Pages’. Atlas Gasoline Powered Pumps ........... 90-91 Cylinders (Hydraulic) 6-51 EGM-Series, Gasoline Pumps ............................. 92 Page: 93 Introduction ...................................................................... 6-7 Yellow Pages 93-104 Pullers, Manual and Hydraulic 140-155 RC-Series, Single-Acting Cylinders ........... 8-11 (Information Section) RC-Series, Cylinder Accessories ...................... 12 Introduction and Standards ................................... 93 Introduction ........................................................ 140-141 RCA-Series, Safety Instructions ................................................ 94-95 MP-Series, Mechanical Pullers ........... 142-143 Single-Acting Aluminium Cylinders ............ 13 Cylinder-Pump BHP-Series, Hydraulic Puller Sets ... 144-147 CLP-Series, Matching and Selection ............................................ 96 BMZ-Series, Single-Acting Pancake Cylinders ........ 14-15 Hydraulic Work Sheet ................................................ 97 Hydraulic Master Puller Sets ............ 148-149 RSM-Series, Basic Hydraulic System
    [Show full text]
  • ANNUAL REPORT 2020 Annual Report | 1
    2020 ANNUAL REPORT 2020 Annual Report | 1 Enerpac Tool Group is a global leader in high-precision tools, controlled force products and solutions for precise heavy lifting. 110 Menomonee ~2300 100+ 100+ YEARS OF Falls, WI EMPLOYEES MANAGEMENT TEAM COUNTRIES HISTORY HEADQUARTERS YEARS EXPERIENCE PRODUCTS SOLD INTO Products Service and Extensive Global 'LYHUVLÀHG Cylinders/jacks, pumps, Rental Distribution Customer Base bolting tools, presses, Bolting, machining 1,500+ long-standing Customers include pullers, tools, Heavy and joint integrity distribution specialty dealers, Lifting Technology relationships national distribution, 3,500+ distributor and large OEM’s locations STRONG BRAND 13 VERTICAL MARKETS RECOGNITION Civil Construction Mining Oil & Gas Aerospace Premium Industrial Tools | Heavy Lifting Power Gen. & Utility Rescue Manufacturing Tools Military Service | Rental | Training Steel & Metal Paper/Wood 2ႇ+Z\9HKLFOH5HSDLU Industrial MRO Medical | Industrial Ropes 2Q+Z\9HKLFOH5HSDLU 2 | 2020 Annual Report 2020 REVENUE BY CATEGORY 2020 REVENUE BY GEOGRAPHY Australia 4% Services (Manpower/ Other 4% Rental) ~25% Other Americas 8% U.S. 37% Asia 11% Middle East 12% Products ~75% Europe 24% DELIVERING LONG TERM GROWTH Sustainable business model built on well-recognized brands, robust global distribution and broad reach of end markets Clear strategy DELIVERING to drive core growth above market and expand margins LONG TERM GROWTH Disciplined capital deployment Powered by strong balance sheet and free cash flow conversion Experienced leadership team Capable of executing to win DEPLOYING CAPITAL Invest in Reduce debt and Disciplined M&A Opportunistic ourselves to drive maintain a strong within tool space share buybacks organic growth balance sheet 2020 Annual Report | 3 DRIVING ORGANIC GROWTH WITH NEW PRODUCTS NEW PRODUCT DEVELOPMENT NEW PRODUCT VITALITY Focusing on innovation through Centers of Investment in NPD, which began Excellence (CoE) and field-based, product/market- in FY16, has driven acceleration in focused specialists new products as a percent of sales.
    [Show full text]
  • Enerpac Tool Group Annual Report 2020
    Enerpac Tool Group Annual Report 2020 Form 10-K (NYSE:EPAC) Published: October 26th, 2020 PDF generated by stocklight.com UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 10-K (Mark One) ☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended August 31, 2020 OR ☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the Transition period from to to Commission File No. 1-11288 ENERPAC TOOL GROUP CORP. (Exact name of Registrant as specified in its charter) Wisconsin 39-0168610 (State or other jurisdiction of (I.R.S. Employer incorporation or organization) Identification No.) N86 W12500 WESTBROOK CROSSING MENOMONEE FALLS, WISCONSIN 53051 Mailing address: P.O. Box 3241, Milwaukee, Wisconsin 53201 (Address of principal executive offices) (262) 293-1500 (Registrant’s telephone number, including area code) Securities registered pursuant to Section 12(b) of the Act: Title of each class Ticker Symbol(s) Name of each exchange on which registered Class A common stock, $0.20 par value per share EPAC NYSE Securities registered pursuant to Section 12(g) of the Act: None Indicate by checkmark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐ Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15d of the Act. Yes ☐ No ☒ Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months, and (2) has been subject to such filing requirements for the past 90 days.
    [Show full text]
  • SBL-1100 Hydraulic Gantry
    SBL-1100 Hydraulic Gantry Meets ASME B30.1-2009 Safety Standards Best in Class Standard Features SBL-1100 Series, Hydraulic Gantry ▼ Shown: SBL-1100 Precision Lift and Position of Heavy Loads The Ultimate in Safety and Control INTELLILIFT The Intellilift wireless control system is included with all Enerpac hydraulic gantries. The Intellilift • Octagonal boom provides superior strength and stability controller offers superior safety and control and includes the following • Wide tread width and dedicated skid tracks provide features: optimal drive surface • Encrypted bi-directional • Self-propelled roller track design minimizes ground communication that eliminates bearing pressure and eliminates wheel spin interference from other devices • Remote operation using multi • Self contained hydraulics in each gantry leg for channel wireless (2.4 GHz) or wired uncluttered work area (RS-485) control • Wireless controls for optimum visibility of load • High and low speed settings • Foldable boom section for easy transportation • Automatic synchronization of lifting with an accuracy of 1 inch (24mm) • Designed and tested to meet ASME B30.1-2009 safety standards • Automatic synchronization of travelling with an accuracy of 0.60 • Lloyds certified to 120% of maximum working load inch (15mm) • Overload and stroke alarms • Remote side shift control • Emergency stop switch ◀ SBL-1100 Series Gantry 2 SBL-1100 Series, Hydraulic Gantry Hydraulic Gantries Hydraulic Gantries are a safe, efficient way to lift and position SBL- heavy loads in applications where traditional cranes will not fit and 1100 permanent overhead structures for job cranes are not an option. Series Hydraulic Gantries are placed on skid tracks to provide a means for moving and placing heavy loads, many times with only one pick.
    [Show full text]
  • Repair Parts Sheet to Protect Your Warranty, Use Only ENERPAC
    Repair Parts Sheet POWERFUL SOLUTIONS. GLOBAL FORCE. Manual Shut-Off Valves V82, V182, V91, AM21 & AM41 L4042 Rev. A 10/12 For Date Codes Beginning with the Letter “O” To Protect Your Warranty, Use Only ENERPAC Hydraulic Oil. Enerpac recommends that all kit components be installed to insure optimum performance of the repaired product. Figure 1 - Manual Shut-Off Valve Identifi cation V82 V182 V91 AM21 AM41 1 Figure 2 - Valve Spindle Assembly 6 7 5 4 TORQUE TO 50 FT-LBS [67.7 Nm] 8 3 2 1 KIT V82K (ASSEMBLED VIEW) BODY OR MANIFOLD (APPEARANCE WILL VARY) Repair Parts List (Refer to figure 2) Item Part Number Qty. Description Item Part Number Qty. Description 1 ✜ ★ B1010203 1 O-Ring, Viton 5 ★ 1 Dust Cap 2 ✜ ★ B1010564 1 Backup Ring 6 ★ 1 T-Handle 3 ★ 1 Stem 7 ★ 1 Set Screw 4 ★ 1 Bonnet 8 (not available) 1 Roll Pin, 5/32 x 1/2" Steel ★ Included in V82K Valve Spindle Repair Kit. ✜ Items can be ordered separately. Notes: The parts included in the V82K Valve Spindle Repair Kit will fi t all valve models shown in Figure 1 (see previous page). Items 1 and 2 can be ordered seperately if needed. Items 3 through 7 are available only in the V82K repair kit. Item 8 is not available for purchase from Enerpac (obtain part locally). Valve body or manifold is not available as a service part. If damaged, a complete replacment valve must be ordered. 2 Valve Spindle Replacement instructions: 1. Relieve all pressure. Be sure that pressure gauge indicates zero (0) psi/bar.
    [Show full text]
  • November 2019 Forward-Looking Statements
    November 2019 Forward-Looking Statements Statements in this presentation that are not historical are considered “forward-looking statements” and are subject to change based on various factors and uncertainties that may cause actual results to differ significantly from expectations. Those factors are contained in Actuant Corporation’s Securities and Exchange Commission filings. All estimates of future performance are as of November 14, 2019. Actuant Corporation’s (doing business as Enerpac Tool Group) inclusion of these estimates or targets in the presentation is not an update, confirmation, affirmation or disavowal of the estimates or targets. 2 Today’s Agenda 10:00 – 12:00 pm Welcome and Strategy Overview R. Baker, R. Dillon, B. Bolens Enerpac Tool Group Strategy Achieving Growth Financial Targets 12:00 – 12:15 pm Lunch 12:15 – 1:15 pm IT&S Commercial Strategy J. Schmaling 1:15 – 2:00 pm New Product Development/Product Showcase J. Schmaling, A. Donaldson 2:00 – 2:45 pm Operations/Sourcing R. Baker 2:45 – 3:00 pm Break 3:00 – 3:30 pm Cortland Strategy R. Baker 3:30 – 4:00 pm Questions and Conclusion All Questions can be emailed to [email protected] 3 Strategic Overview A Global Leader in Industrial Tools and Services Menomonee Global leader in high precision tools, controlled 110 Falls, WI ~2,600 100+ 90+ YEARS OF EMPLOYEES MANAGEMENT TEAM # OF COUNTRIES HEADQUARTERS force products and HISTORY YEARS EXPERIENCE PRODUCTS SOLD INTO solutions for precise heavy lifting. Products Service and Extensive Global Diversified Rental Distribution
    [Show full text]
  • Repair Parts Sheet RD-41, RD-43, RD-46
    Repair Parts Sheet POWERFUL SOLUTIONS. GLOBAL FORCE. RD-41, RD-43, RD-46 L964 Rev. E 10/12 For Date Codes Beginning with the Letter "C" To Protect Your Warranty, Use Only ENERPAC Hydraulic Oil. Enerpac recommends that all kit components be installed to insure optimum performance of the repaired product. 17 S 13 16 Note: Cylinder base, item #5 is not available as a service item. Replace 12 complete cylinder. 5 11 10 15 9 6 8 4 3 2 7 S 14 6 1 S Indicates staked threads. Stake mark must be removed prior to disassembly. Failure to do so may result in damage to parts. Restake after test of repaired cylinder. Item RD-41 RD-43 RD-46 Qty. Description ★ 13 1211 10 CJ383044 CJ383044 CJ383044 1 Internal StopRing 17 16 15 14 987 6 CL7671075 CW1861074 CL767107 CW186107 CL767107 CW186107 1 1 Bearing Piston Enerpac Worldwide Locations e-mail: [email protected] internet: www.enerpac.com 3 2 1 Indicates itemsincludedinRepairKitRD46K2. Australia and New Zealand Italy The Netherlands, Belgium, Actuant Australia Ltd. ENERPAC S.p.A. Luxembourg, Block V Unit 3 Via Canova 4 Central and Eastern Europe, Regents Park Estate 20094 Corsico (Milano) Baltic States, Greece, Turkey ★ ★ ★ ★ ★ ★ ★ ★ ★ 391 Park Road T +39 02 4861 111 and CIS countries Regents Park NSW 2143 F +39 02 4860 1288 ENERPAC B.V. CR344028 CH873041 B1117903 B1117565 CJ384570F871048 CJ384570 F871048 CJ384570 F871048 1Cap L298044 L301044CL779040B1110903 CH868041 B1020564 L301044 CL782040B1020903 CL784040 L301044 1 1 Plunger External StopRing (P.O. Box 261) Australia [email protected] Galvanistraat 115 T +61 (0)2 9743 8988 6716 AE Ede F +61 (0)2 9743 8648 Japan P.O.
    [Show full text]
  • Repair Parts Sheet RW-101, RW-102, RW-104, and RW-106
    Repair Parts Sheet ® RW-101, RW-102, RW-104, and RW-106 Cylinders (Standard and Viton Seals) L1830 Rev. B 12/04 For Date Codes Beginning with the Letter "D" 17 4 6 15 16 14 13 12 Staked threads. Remove stake mark prior to disassembly. Restake after test of repaired 235 6 1 7 891018 11 cylinder. Repair Parts List Item Part NumberQty. Description RW-101 RW-102 RW-104 RW-106 1 M701005 G469005 CB424030 G837005 1 Base 2 G836028 G836028 G836028 G836028 1 Screw 3 ★ C611049 ★ C611049 ★ C611049 ★ C611049 1 Retaining Ring 4 ★ CB663041 ★ CB663041 ★ CB663041 ★ CB663041 1 U-Cup 5 ★ G384108 ★ G384108 ★ G384108 ★ G384108 1 Washer 6 G382107 G382107 G382107 G382107 2 Rod Bearing 7 DA2286028 DA2286028 DA2286028 B1014028 1 Screw 8 — — — F948209 1 Bushing 9 — — — ★ G834167 1 Gasket 10 — — — G833055 1 Acorn Nut 11 G385044 G385044 G385044 G385044 1 Bearing Stop Ring 12 — A102G A102G A102G 1 Saddle Assembly 13 ★ G416044 ★ G416044 ★ G416044 ★ G416044 1 Wiper 14 — — — G831446 1 Bearing Sleeve 15 L202110 L202110 CB425110 F937110 1 Spring 16 M699040SR G415040SR DA2284040SR G838040 1 Plunger 17 FZ-1630 FZ-1630 FZ-1630 FZ-1630 1 Reducer Bushing 18 DC1242271 DC1242271 DC1242271 DC1242271 1 Thread Protector — ★★ ★ ★ 1 Decal (Not Shown) ★ Indicates items included in, and available only as part of Repair Kit RC-102K. For Viton seals, order Repair Kit RC-102KV. Note: Rod bearings (Item 6) to be assembled with splits staggered 90° apart. Note: Models RW-101 and RW-102 and RW-104do not have a Bushing, Gasket, Acorn Nut or Bearing Sleeve due to their lower stroke.
    [Show full text]
  • L538 Rev. a 3/97 RWP-101 Parts Sheet
    Repair Parts Sheet ® A UNIT OF APPLIED POWER INC. RWP - 101 L-538 For date codes beginning with "A". Rev. A 03/97 PC5412 Rated Capacity ........... 20,620 Lbs. Plunger Stroke ........... 1-27/32 Inch Hydraulic Pressure....... 10,000 PSI TO PROTECT YOUR WARRANTY, USE ONLY ENERPAC HYDRAULIC OIL. Parts List Item No. Part Number Qty. Description 1 M818101 1 End Plate 2 M891110 1 Spring 3 Y820040 1 Plunger 4 Y828030 1 Cylinder 5 ★CK387041 1 U-Cup 6 ★CJ422041 1 U-Cup 7 M370006 1 Plug 8 B1008028 6 Cap Screw 9 A8001271 1 Plug ★ Indicates items included in Repair Kit RW3K1. Australia Germany, Scandinavia, India Mexico Spain, Portugal United States, Canada, ENERPAC Eastern Europe, Austria, ENERPAC ENERPAC ENERPAC Latin America and Applied Power Australia, Ltd. Switzerland Hydraulics (India) Pvt Ltd. Applied Power Mexico S.A. de C.V. Applied Power International, S.A. Caribbean P.O. Box 261 Regents Park ENERPAC 203 Vardhaman Chamber Av. Principal La Paz #100 Calle de la Imprenta, 7 ENERPAC Sydney, N.S.W. 2143 Applied Power GmbH Plot #84, Sector 17 Fracc. Industrial La Paz Polígono Industrial 13000 West Silver Spring Drive Tel: (61) (2) 9743 8988 P.O. Box 30 01 13 Vashi, New Bombay 400 705 42084 Pachuca. Hidalgo, Mexico 28100 Alcobendas (Madrid) Butler, Wisconsin 53007, USA Fax: (61) (2) 9743 8648 Mündelheimer Weg 51 India Tel: (52) 771 33700 Spain Tel: (414) 781-6600 40401 Düsseldorf 30 Tel: 91-22-7631062 Fax: (52) 771 83800 Tel: (34) 1 661 11 25 1-800-433-2766 (End User) CIS Germany Fax: 91-22-7670309 Fax: ( 34) 1 661 47 89 1-800-558-0530 (Distributor) Applied Power Moscow Tel: (49) (211) 47 14 90 Singapore Fax: (414) 781-1049 Leninsky Prospekt 95A Fax: (49) (211) 4714 928/940 Italy Applied Power Asia Pte Ltd.
    [Show full text]