DOCSLIB.ORG

SBL-1100 Hydraulic Gantry

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
SBL-1100 Hydraulic Gantry SBL-1100 Hydraulic Gantry Meets ASME B30.1-2009 Safety Standards Best in Class Standard Features SBL-1100 Series, Hydraulic Gantry ▼ Shown: SBL-1100 Precision Lift and Position of Heavy Loads The Ultimate in Safety and Control INTELLILIFT The Intellilift wireless control system is included with all Enerpac hydraulic gantries. The Intellilift • Octagonal boom provides superior strength and stability controller offers superior safety and control and includes the following • Wide tread width and dedicated skid tracks provide features: optimal drive surface • Encrypted bi-directional • Self-propelled roller track design minimizes ground communication that eliminates bearing pressure and eliminates wheel spin interference from other devices • Remote operation using multi • Self contained hydraulics in each gantry leg for channel wireless (2.4 GHz) or wired uncluttered work area (RS-485) control • Wireless controls for optimum visibility of load • High and low speed settings • Foldable boom section for easy transportation • Automatic synchronization of lifting with an accuracy of 1 inch (24mm) • Designed and tested to meet ASME B30.1-2009 safety standards • Automatic synchronization of travelling with an accuracy of 0.60 • Lloyds certified to 120% of maximum working load inch (15mm) • Overload and stroke alarms • Remote side shift control • Emergency stop switch ◀ SBL-1100 Series Gantry 2 SBL-1100 Series, Hydraulic Gantry Hydraulic Gantries Hydraulic Gantries are a safe, efficient way to lift and position SBL- heavy loads in applications where traditional cranes will not fit and 1100 permanent overhead structures for job cranes are not an option. Series Hydraulic Gantries are placed on skid tracks to provide a means for moving and placing heavy loads, many times with only one pick. Enerpac offers three series of Hydraulic Gantry systems: • The cost-effective SL-Series with best in class control and comparable capacity utilizing bare cylinders offered in 2 or 3 stages Capacity 4 legs: • The heavy-duty SBL-Series with capacities up to 1,200 tons and 3-stage 1180-425 tons lifting capability through the boom structure Lift Height: • The MBL-Series, which incorporates all features of the SBL-Series and offers full lifting capacity over the entire stroke 14.34-39.38 feet All Enerpac gantries are delivered with specific properties and control systems to ensure optimum stability and safety. ▼ Optional Accessories Skid Tracks Allows for easy leveling of the gantry tower, available Dimensions shown in inches. in two standard lengths, 169.51 3 meters and 6 meters. Dimensions shown in feet. Stage 3 88.29 Header Beams Sold in pairs and includes 15.75 Stage 2 lifting points and fork pock- 19.29 ets for easy positioning on 1.57 gantry towers. 20.63 Stage 1 Powered Side Shift 39.38 Electric propulsion con- trolled by standard gantry 31.72 controls. Each set consits 172.06 of 4 units and 2 extension 22.98 bars. 83.83 14.34 Lifting Lugs 26.14 Designed to transfer the 35.98 11.42 load to the top of the header 45.83 68.66 5.51 beam. Can accommodate 55.43 108.66 a 250 ton shackle or attach directly to the lifted load. Stage Capacity Stroke Weight each leg per tower (excluding oil) (ton) (ft) (lbs) 1 295 8.64 2 190 8.74 26,345 3 106 7.66 www.enerpac.com 3 SBL-1100 Hydraulic Gantry The Industrial Tools Line Enerpac Worldwide Locations Cylinders and Lifting Products Australia and New Zealand Japan The Netherlands, Belgium, • General Purpose Actuant Australia Ltd. Applied Power Japan LTD KK Luxembourg, Central and • Aluminum: Lock Nut, Solid- and Block V Unit 3, Regents Park Besshocho 85-7 Eastern Europe, Baltic States, Hollow Plunger Estate Kita-ku, Saitama-shi 331-0821, Greece, Turkey and CIS • Pancake, Low Height 391 Park Road, Japan countries • Pull Regents Park NSW 2143 T +81 48 662 4911 ENERPAC B.V. • Hollow Plunger (P.O. Box 261) Australia F +81 48 662 4955 Galvanistraat 115, 6716 AE Ede T +61 297 438 988 [email protected] P.O. Box 8097, 6710 AB Ede • Precision F +61 297 438 648 The Netherlands • Long Stroke [email protected] Middle East, Egypt and Libya T +31 318 535 911 • High Tonnage ENERPAC Middle East FZE F +31 318 535 848 • Jacks Brazil Office 423, LOB 15 [email protected] • Pow'R-RISER® Lifting Jacks Power Packer do Brasil Ltda. P.O. Box 18004, Jebel Ali, Dubai • Pow'R-LOCK™ Lifting Jacks Rua Luiz Lawrie Reid, 548 United Arab Emirates Enerpac Integrated Solutions B.V • Extreme Environment Products 09930-760 - Diadema (SP)-Brasil T +971 (0)4 8872686 Opaalstraat 44, 7554 TS Hengelo T +55 11 5525 2311 F +971 (0)4 8872687 P.O. Box 421, 7550 AK Hengelo Pumps Toll Free: 0800 891 5770 [email protected] The Netherlands • Manual [email protected] T +31 74 242 20 45 • Cordless and Electric Driven Russia F +31 74 243 03 38 • Compressed Air Driven China (Taicang) Rep. office Enerpac [email protected] • Petrol Driven Actuant (China) Industries Co.Ltd. Russian Federation No. 6 Nanjing East Road, Admirala Makarova Street 8 South Africa and other English System Components Taicang Economic Dep Zone 125212 Moscow, Russia speaking African countries • Hoses, Couplers, Oil Jiangsu, China T +7 495 98090 91 ENERPAC AFRICA ( PTY ) Ltd. T +86 0512 5328 7500 F +7 495 98090 92 5 Bauhinia Avenue • Manifolds, Fittings F +86 0512 5335 9690 [email protected] Cambridge Office Park, Block E • Gauges, Adaptors Toll Free: Highveld Techno Park, Centurion Valves T +86 400 885 0369 Southeast Asia, Hong Kong and Republic of South-Africa [email protected] Taiwan T 0027 (0) 12 940 0656 • 3-and 4-Way Directional Actuant Asia Pte Ltd. [email protected] • Pressure and Flow Control France, Switzerland, North Africa 83 Joo Koon Circle, and French speaking African Singapore 629109 United Kingdom and Ireland Presses countries T +65 68 63 0611 ENERPAC UK Ltd., • H-Frame, Roll Frame ENERPAC F +65 64 84 5669 5 Coopies Field • C-Clamp and Arbor Une division d’ACTUANT France Toll Free: Morpeth, Northumberland • Tension Meters, Load Cells S.A.S. T +1800 363 7722 NE61 6JR, England ZA de Courtaboeuf [email protected] Tel: +44 1670 5016 50 Pullers 32, avenue de la Baltique Fax: +44 1670 5016 51 • Master Pullers Sets 91140 VILLEBON /YVETTE South Korea [email protected] • Multi Purpose Puller Sets France Actuant Korea Ltd. • Posi Lock® Pullers T +33 1 60 13 68 68 3Ba 717, Shihwa Industrial USA, Latin America and F +33 1 69 20 37 50 Complex Caribbean Tools [email protected] Jungwang-Dong, Shihung-Shi, ENERPAC World Headquarters • Maintenance Sets Kyunggi-Do P.O. Box 3241 Germany and Austria Republic of Korea 429-450 Milwaukee, WI 53201-3241 USA • Punches ENERPAC GmbH T +82 31 434 4506 N86 W12500 Westbrook Crossing • Lifting Wedges P.O. Box 300113 F +82 31 434 4507 Menomonee Falls, Wisconsin • Machine Lifts D-40401 Düsseldorf [email protected] 53051 • Load Skates Willstätterstrasse 13 T +1 262 293 1600 • Wedgie, Spreaders D-40549 Düsseldorf, Germany Spain and Portugal F +1 262 293 7036 • Cutters T +49 211 471 490 ENERPAC SPAIN, S.L. User inquiries: • Pipe Benders F +49 211 471 49 28 Avda. Los Frailes, 40 – Nave C & D +1 800 433 2766 • Stressing Tools [email protected] Pol. Ind. Los Frailes Distributor inquiries/orders: 28814 Daganzo de Arriba +1 800 558 0530 Bolting Tools India (Madrid) Spain +1 800 628 0490 • Multipliers ENERPAC Hydraulics Pvt. Ltd. T +34 91 884 86 06 Technical inquiries: • Torque Wrenches Actuant India, No. 10, Bellary Rd F +34 91 884 86 11 [email protected] Sadashivanagar [email protected] [email protected] • Impact Sockets • Wrench and Tensioner Pumps Bangalore - 560 080, India T +91 80 3928 9000 Sweden, Denmark, Norway, 10/14 • Twin Safety Hoses [email protected] Finland and Iceland • Nut Cutters / Splitters Enerpac Scandinavia AB • Flange/Wedge Spreaders Italy Kopparlundsvägen 14, • Flange Alignment Tools ENERPAC S.p.A. 721 30 Västerås, Sweden • Flange Face Tool Via Canova 4 T +46 (0) 771 415000 20094 Corsico (Milano) scandinavianinquiries@enerpac. Integrated Solutions T +39 02 4861 111 com • Hydraulic Gantries F +39 02 4860 1288 • Strand Jacks [email protected] • SyncHoist • Stage Lift Systems • Skidding Systens • Self Propelled Modualr Trailer • Synchronized Lifting Systems • Uni-Lift® Actuators Your Enerpac Distributor: e-mail: [email protected] Internet: www.enerpac.com 030118512_656 EN-US © 2014 Enerpac - Subject to change without notice..
Load more

Recommended publications
  • Manual Valves Repair Parts Sheet to Protect Your Warranty
    Repair Parts Sheet Manual Valves L1257 Rev. J 09/13 For Date Codes Beginning with the Letters “B” and “C” To Protect Your Warranty, Use Only ENERPAC Hydraulic Oil. Enerpac recommends that all kit components be installed to insure optimum performance of the repaired product. Figure 1, Main Assembly 1 Apply Loctite 222 2 3 18 4 19 5 20 6 19 7 8 Torque item 7 to 28-34 ft. lbs. 22 [38-46 Nm] 9 23 TANK 25 24 10 11 26 12 30 28 13 14 27 15 16 17 29 28 Torque to 72-96 in. lbs. [8-11 Nm] Torque to 11-13 ft. lbs. [15-18 Nm] Identification - Early Production Manual Valves Early production manual valves contain both a valve code letter and valve code number. This letter and number are used to identify the valve model. See Table A. Example: Location of Code Letter ENERPAC X CBxxx.900 CxxxxC Date Code Location of Code Number Table A - Valve Code Chart - Early Production Manual Valves Model Previous Valve Code Equivalent Present Disc Model Previous Valve Code Equivalent Present Disc Number Valve Code Assembly Number Valve Code Assembly Letter Number Letter Number Example: Number Fig. 1, Item 16 Number Fig. 1, Item 16 (see Table B) (see Table B) ENERPAC VM-4 A CB317900 4-O-P-B-O CH542950 VM-3 G CB318900 3-O-P-B-O CH538950 Code Number Date Code VC-4 B CB317900 X-X-X-X-X 4-O-R-B-OCxxxxC CH542950 VC-3 H CB318900 3-O-R-B-O CH538950 VM-4L C CB317900 4-O-P-B-X CH542950 VC-20 I CB319900 4-C-R-B-O CH537950 VC-4L D CB317900 4-O-R-B-X CH542950 VC-20L J CB319900 4-C-R-B-X CH537950 VM-3LExample:E CB317900 3-O-P-B-X CH542950 VC-15L K CB319900 3-C-R-B-X CH537950 VC-3L F CB317900 3-O-R-B-X CH542950Location ofVC-15 Code LetteL r CB320900 3-C-R-B-O CH541950 ENERPAC X CBxxx.900 CxxxxC Date Code Location of Code Number Identification - Recent Production Manual Valves Recent production manual valves contain an alphanumeric valve code number.
    [Show full text]
  • Repair Parts Sheet
    Repair Parts Sheet POWERFUL SOLUTIONS. GLOBAL FORCE. Turbo II Air Pumps L2533 Rev. L 07/15 For Date Codes Beginning with the Letters “C”, “D” and “E” To Protect Your Warranty, Use Only ENERPAC Hydraulic Oil. Enerpac recommends that all kit components be installed to insure optimum performance of the repaired product. Note: Storing the pump in the vertical position may cause it to lose its prime. If pump loses its prime: 1. Remove cover. 2. Remove relief valve. 3. Fill chamber with oil. 4. Apply Loctite 545 to threads and torque to 10-12 ft-lbs. [14-16 Nm]. 5. Replace pump cover. See Figure 1 for gasket orientation detail and cover screw torquing sequence. ® TURBOII Contents: Figure 1 — Treadle Assembly, T Version ..................................2 Figure 7 — Air Motor Assembly ...............................................8 Figure 2 — Treadle Assembly, M, C, S Version ........................3 Figure 8 — Release Valve .........................................................9 Figure 2a & 2b – Handle Assembly, R Version .........................4 Figure 9 — Manual Valve ........................................................10 Figure 3 — Cover Assembly .....................................................5 Figure 10 — Pump Manifolds, PAS Version ...........................11 Figure 4 — Hydraulic Section Detail.........................................6 Figure 11 — Pump Manifold, PAC Version .............................11 Figure 5 — Seal Push Tool .......................................................7 Table 1 — Relief Valve Setting
    [Show full text]
  • Repair Parts Sheet Hydraulic Nut Splitters, NC-1319, NC
    Repair Parts Sheet ® Hydraulic Nut Splitters, NC-1319, NC-1924, NC-2432, NC-3241, NC-4150, NC-5060, NC-6075 L1456 Rev. C 12/04 For Date Codes Beginning with the Letter A To Protect Your Warranty, Use Only ENERPAC Hydraulic Oil. Enerpac recommends that all kit components be installed to insure optimum performance of the repaired product. 1 2 4 5 3 6 8 7 9 10 Repair Parts List for Figure 1 Item Part NumberQty. Description NC1319 NC1924 NC2432 NC3241 NC4150 NC5060 NC6075 1 N/A N/A N/A N/A N/A N/A N/A Not sold separately 2 Std. Hardware 1 M8x1.25x10 Screw Std. Hardware 1 M10x1.25x10 Screw Std. Hardware Std. Hardware Std. Hardware 1 M12x1.75x10 Screw Std. Hardware Std. Hardware 1 M14x2x18 Screw 3 DC6532110 DC6533110 DC6534110 DC6535110 DC6536110 DC6537110 DC6538110 1 Spring 4 NCB1319 NCB1924 NCB2432 NCB3241 NCB4150 NCB5060 NCB6075 1 Moving Blade 5 DC6539013 DC6540013 DC6541013 DC6542013 DC6543013 DC6544013 DC6545013 1 Guide Block 6 Std. Hardware 1 M5x0.8x4 Screw Std. Hardware 1 M6x1x6 Screw Std. Hardware Std. Hardware Std. Hardware 1 M8x1.25x6 Screw Std. Hardware Std. Hardware 1 M10x1.5x12 Screw 7 DC6546040 DC6547040 DC6548040 DC6549040 DC6550040 DC6551040 DC6552040 1 Main Piston 8 DC6553503 DC6554503 DC6555503 DC6556503 DC6557503 DC6558503 DC6559503 1 O-Ring 9 DC6560030 DC6561030 DC6562030 DC6563030 DC6564030 DC6565030 DC6566030 1 Cylinder 10 CR400 CR400 CR400 CR400 CR400 CR400 CR400 1 Coupler ❚ DC6567816 1 2.5 mm T-Handle Wrench ❚ DC6568816 13 mm T-Handle Wrench ❚ DC6569816 DC6569816 DC6569816 DC6569816 1 4 mm T-Handle Wrench ❚ DC6570816 DC6570816 DC6570816 1 5 mm T-Handle Wrench ❚ DC6571816 DC6571816 DC6571816 DC6571816 DC6571816 1 6 mm T-Handle Wrench ❚ DC6572530 DC6572530 DC6573530 DC6573530 DC6574530 DC6574530 DC6575530 1 Case ❚ Not shown.
    [Show full text]
  • E321e-HFT Catalog
    E321e ® A UNIT OF APPLIED POWER ® Hydraulic Power for all Industrial Applications Hydraulic Power for all Industrial Applications E321e ® ® Table of Contents Hydraulic Technology Worldwide H Introduction PAM-2000-Series, For your Safety and Basic Air Hydraulic Pumps ...................................... 88-89 Hydraulic Information, see our The World of Enerpac ................................................... 4 PGM-Series, new ‘Yellow Pages’. Atlas Gasoline Powered Pumps ........... 90-91 Cylinders (Hydraulic) 6-51 EGM-Series, Gasoline Pumps ............................. 92 Page: 93 Introduction ...................................................................... 6-7 Yellow Pages 93-104 Pullers, Manual and Hydraulic 140-155 RC-Series, Single-Acting Cylinders ........... 8-11 (Information Section) RC-Series, Cylinder Accessories ...................... 12 Introduction and Standards ................................... 93 Introduction ........................................................ 140-141 RCA-Series, Safety Instructions ................................................ 94-95 MP-Series, Mechanical Pullers ........... 142-143 Single-Acting Aluminium Cylinders ............ 13 Cylinder-Pump BHP-Series, Hydraulic Puller Sets ... 144-147 CLP-Series, Matching and Selection ............................................ 96 BMZ-Series, Single-Acting Pancake Cylinders ........ 14-15 Hydraulic Work Sheet ................................................ 97 Hydraulic Master Puller Sets ............ 148-149 RSM-Series, Basic Hydraulic System
    [Show full text]
  • ANNUAL REPORT 2020 Annual Report | 1
    2020 ANNUAL REPORT 2020 Annual Report | 1 Enerpac Tool Group is a global leader in high-precision tools, controlled force products and solutions for precise heavy lifting. 110 Menomonee ~2300 100+ 100+ YEARS OF Falls, WI EMPLOYEES MANAGEMENT TEAM COUNTRIES HISTORY HEADQUARTERS YEARS EXPERIENCE PRODUCTS SOLD INTO Products Service and Extensive Global 'LYHUVLÀHG Cylinders/jacks, pumps, Rental Distribution Customer Base bolting tools, presses, Bolting, machining 1,500+ long-standing Customers include pullers, tools, Heavy and joint integrity distribution specialty dealers, Lifting Technology relationships national distribution, 3,500+ distributor and large OEM’s locations STRONG BRAND 13 VERTICAL MARKETS RECOGNITION Civil Construction Mining Oil & Gas Aerospace Premium Industrial Tools | Heavy Lifting Power Gen. & Utility Rescue Manufacturing Tools Military Service | Rental | Training Steel & Metal Paper/Wood 2ႇ+Z\9HKLFOH5HSDLU Industrial MRO Medical | Industrial Ropes 2Q+Z\9HKLFOH5HSDLU 2 | 2020 Annual Report 2020 REVENUE BY CATEGORY 2020 REVENUE BY GEOGRAPHY Australia 4% Services (Manpower/ Other 4% Rental) ~25% Other Americas 8% U.S. 37% Asia 11% Middle East 12% Products ~75% Europe 24% DELIVERING LONG TERM GROWTH Sustainable business model built on well-recognized brands, robust global distribution and broad reach of end markets Clear strategy DELIVERING to drive core growth above market and expand margins LONG TERM GROWTH Disciplined capital deployment Powered by strong balance sheet and free cash flow conversion Experienced leadership team Capable of executing to win DEPLOYING CAPITAL Invest in Reduce debt and Disciplined M&A Opportunistic ourselves to drive maintain a strong within tool space share buybacks organic growth balance sheet 2020 Annual Report | 3 DRIVING ORGANIC GROWTH WITH NEW PRODUCTS NEW PRODUCT DEVELOPMENT NEW PRODUCT VITALITY Focusing on innovation through Centers of Investment in NPD, which began Excellence (CoE) and field-based, product/market- in FY16, has driven acceleration in focused specialists new products as a percent of sales.
    [Show full text]
  • Enerpac Tool Group Annual Report 2020
    Enerpac Tool Group Annual Report 2020 Form 10-K (NYSE:EPAC) Published: October 26th, 2020 PDF generated by stocklight.com UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 10-K (Mark One) ☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended August 31, 2020 OR ☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the Transition period from to to Commission File No. 1-11288 ENERPAC TOOL GROUP CORP. (Exact name of Registrant as specified in its charter) Wisconsin 39-0168610 (State or other jurisdiction of (I.R.S. Employer incorporation or organization) Identification No.) N86 W12500 WESTBROOK CROSSING MENOMONEE FALLS, WISCONSIN 53051 Mailing address: P.O. Box 3241, Milwaukee, Wisconsin 53201 (Address of principal executive offices) (262) 293-1500 (Registrant’s telephone number, including area code) Securities registered pursuant to Section 12(b) of the Act: Title of each class Ticker Symbol(s) Name of each exchange on which registered Class A common stock, $0.20 par value per share EPAC NYSE Securities registered pursuant to Section 12(g) of the Act: None Indicate by checkmark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐ Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15d of the Act. Yes ☐ No ☒ Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months, and (2) has been subject to such filing requirements for the past 90 days.
    [Show full text]
  • Repair Parts Sheet to Protect Your Warranty, Use Only ENERPAC
    Repair Parts Sheet POWERFUL SOLUTIONS. GLOBAL FORCE. Manual Shut-Off Valves V82, V182, V91, AM21 & AM41 L4042 Rev. A 10/12 For Date Codes Beginning with the Letter “O” To Protect Your Warranty, Use Only ENERPAC Hydraulic Oil. Enerpac recommends that all kit components be installed to insure optimum performance of the repaired product. Figure 1 - Manual Shut-Off Valve Identifi cation V82 V182 V91 AM21 AM41 1 Figure 2 - Valve Spindle Assembly 6 7 5 4 TORQUE TO 50 FT-LBS [67.7 Nm] 8 3 2 1 KIT V82K (ASSEMBLED VIEW) BODY OR MANIFOLD (APPEARANCE WILL VARY) Repair Parts List (Refer to figure 2) Item Part Number Qty. Description Item Part Number Qty. Description 1 ✜ ★ B1010203 1 O-Ring, Viton 5 ★ 1 Dust Cap 2 ✜ ★ B1010564 1 Backup Ring 6 ★ 1 T-Handle 3 ★ 1 Stem 7 ★ 1 Set Screw 4 ★ 1 Bonnet 8 (not available) 1 Roll Pin, 5/32 x 1/2" Steel ★ Included in V82K Valve Spindle Repair Kit. ✜ Items can be ordered separately. Notes: The parts included in the V82K Valve Spindle Repair Kit will fi t all valve models shown in Figure 1 (see previous page). Items 1 and 2 can be ordered seperately if needed. Items 3 through 7 are available only in the V82K repair kit. Item 8 is not available for purchase from Enerpac (obtain part locally). Valve body or manifold is not available as a service part. If damaged, a complete replacment valve must be ordered. 2 Valve Spindle Replacement instructions: 1. Relieve all pressure. Be sure that pressure gauge indicates zero (0) psi/bar.
    [Show full text]
  • November 2019 Forward-Looking Statements
    November 2019 Forward-Looking Statements Statements in this presentation that are not historical are considered “forward-looking statements” and are subject to change based on various factors and uncertainties that may cause actual results to differ significantly from expectations. Those factors are contained in Actuant Corporation’s Securities and Exchange Commission filings. All estimates of future performance are as of November 14, 2019. Actuant Corporation’s (doing business as Enerpac Tool Group) inclusion of these estimates or targets in the presentation is not an update, confirmation, affirmation or disavowal of the estimates or targets. 2 Today’s Agenda 10:00 – 12:00 pm Welcome and Strategy Overview R. Baker, R. Dillon, B. Bolens Enerpac Tool Group Strategy Achieving Growth Financial Targets 12:00 – 12:15 pm Lunch 12:15 – 1:15 pm IT&S Commercial Strategy J. Schmaling 1:15 – 2:00 pm New Product Development/Product Showcase J. Schmaling, A. Donaldson 2:00 – 2:45 pm Operations/Sourcing R. Baker 2:45 – 3:00 pm Break 3:00 – 3:30 pm Cortland Strategy R. Baker 3:30 – 4:00 pm Questions and Conclusion All Questions can be emailed to [email protected] 3 Strategic Overview A Global Leader in Industrial Tools and Services Menomonee Global leader in high precision tools, controlled 110 Falls, WI ~2,600 100+ 90+ YEARS OF EMPLOYEES MANAGEMENT TEAM # OF COUNTRIES HEADQUARTERS force products and HISTORY YEARS EXPERIENCE PRODUCTS SOLD INTO solutions for precise heavy lifting. Products Service and Extensive Global Diversified Rental Distribution
    [Show full text]
  • Repair Parts Sheet RD-41, RD-43, RD-46
    Repair Parts Sheet POWERFUL SOLUTIONS. GLOBAL FORCE. RD-41, RD-43, RD-46 L964 Rev. E 10/12 For Date Codes Beginning with the Letter "C" To Protect Your Warranty, Use Only ENERPAC Hydraulic Oil. Enerpac recommends that all kit components be installed to insure optimum performance of the repaired product. 17 S 13 16 Note: Cylinder base, item #5 is not available as a service item. Replace 12 complete cylinder. 5 11 10 15 9 6 8 4 3 2 7 S 14 6 1 S Indicates staked threads. Stake mark must be removed prior to disassembly. Failure to do so may result in damage to parts. Restake after test of repaired cylinder. Item RD-41 RD-43 RD-46 Qty. Description ★ 13 1211 10 CJ383044 CJ383044 CJ383044 1 Internal StopRing 17 16 15 14 987 6 CL7671075 CW1861074 CL767107 CW186107 CL767107 CW186107 1 1 Bearing Piston Enerpac Worldwide Locations e-mail: [email protected] internet: www.enerpac.com 3 2 1 Indicates itemsincludedinRepairKitRD46K2. Australia and New Zealand Italy The Netherlands, Belgium, Actuant Australia Ltd. ENERPAC S.p.A. Luxembourg, Block V Unit 3 Via Canova 4 Central and Eastern Europe, Regents Park Estate 20094 Corsico (Milano) Baltic States, Greece, Turkey ★ ★ ★ ★ ★ ★ ★ ★ ★ 391 Park Road T +39 02 4861 111 and CIS countries Regents Park NSW 2143 F +39 02 4860 1288 ENERPAC B.V. CR344028 CH873041 B1117903 B1117565 CJ384570F871048 CJ384570 F871048 CJ384570 F871048 1Cap L298044 L301044CL779040B1110903 CH868041 B1020564 L301044 CL782040B1020903 CL784040 L301044 1 1 Plunger External StopRing (P.O. Box 261) Australia [email protected] Galvanistraat 115 T +61 (0)2 9743 8988 6716 AE Ede F +61 (0)2 9743 8648 Japan P.O.
    [Show full text]
  • Repair Parts Sheet RW-101, RW-102, RW-104, and RW-106
    Repair Parts Sheet ® RW-101, RW-102, RW-104, and RW-106 Cylinders (Standard and Viton Seals) L1830 Rev. B 12/04 For Date Codes Beginning with the Letter "D" 17 4 6 15 16 14 13 12 Staked threads. Remove stake mark prior to disassembly. Restake after test of repaired 235 6 1 7 891018 11 cylinder. Repair Parts List Item Part NumberQty. Description RW-101 RW-102 RW-104 RW-106 1 M701005 G469005 CB424030 G837005 1 Base 2 G836028 G836028 G836028 G836028 1 Screw 3 ★ C611049 ★ C611049 ★ C611049 ★ C611049 1 Retaining Ring 4 ★ CB663041 ★ CB663041 ★ CB663041 ★ CB663041 1 U-Cup 5 ★ G384108 ★ G384108 ★ G384108 ★ G384108 1 Washer 6 G382107 G382107 G382107 G382107 2 Rod Bearing 7 DA2286028 DA2286028 DA2286028 B1014028 1 Screw 8 — — — F948209 1 Bushing 9 — — — ★ G834167 1 Gasket 10 — — — G833055 1 Acorn Nut 11 G385044 G385044 G385044 G385044 1 Bearing Stop Ring 12 — A102G A102G A102G 1 Saddle Assembly 13 ★ G416044 ★ G416044 ★ G416044 ★ G416044 1 Wiper 14 — — — G831446 1 Bearing Sleeve 15 L202110 L202110 CB425110 F937110 1 Spring 16 M699040SR G415040SR DA2284040SR G838040 1 Plunger 17 FZ-1630 FZ-1630 FZ-1630 FZ-1630 1 Reducer Bushing 18 DC1242271 DC1242271 DC1242271 DC1242271 1 Thread Protector — ★★ ★ ★ 1 Decal (Not Shown) ★ Indicates items included in, and available only as part of Repair Kit RC-102K. For Viton seals, order Repair Kit RC-102KV. Note: Rod bearings (Item 6) to be assembled with splits staggered 90° apart. Note: Models RW-101 and RW-102 and RW-104do not have a Bushing, Gasket, Acorn Nut or Bearing Sleeve due to their lower stroke.
    [Show full text]
  • L538 Rev. a 3/97 RWP-101 Parts Sheet
    Repair Parts Sheet ® A UNIT OF APPLIED POWER INC. RWP - 101 L-538 For date codes beginning with "A". Rev. A 03/97 PC5412 Rated Capacity ........... 20,620 Lbs. Plunger Stroke ........... 1-27/32 Inch Hydraulic Pressure....... 10,000 PSI TO PROTECT YOUR WARRANTY, USE ONLY ENERPAC HYDRAULIC OIL. Parts List Item No. Part Number Qty. Description 1 M818101 1 End Plate 2 M891110 1 Spring 3 Y820040 1 Plunger 4 Y828030 1 Cylinder 5 ★CK387041 1 U-Cup 6 ★CJ422041 1 U-Cup 7 M370006 1 Plug 8 B1008028 6 Cap Screw 9 A8001271 1 Plug ★ Indicates items included in Repair Kit RW3K1. Australia Germany, Scandinavia, India Mexico Spain, Portugal United States, Canada, ENERPAC Eastern Europe, Austria, ENERPAC ENERPAC ENERPAC Latin America and Applied Power Australia, Ltd. Switzerland Hydraulics (India) Pvt Ltd. Applied Power Mexico S.A. de C.V. Applied Power International, S.A. Caribbean P.O. Box 261 Regents Park ENERPAC 203 Vardhaman Chamber Av. Principal La Paz #100 Calle de la Imprenta, 7 ENERPAC Sydney, N.S.W. 2143 Applied Power GmbH Plot #84, Sector 17 Fracc. Industrial La Paz Polígono Industrial 13000 West Silver Spring Drive Tel: (61) (2) 9743 8988 P.O. Box 30 01 13 Vashi, New Bombay 400 705 42084 Pachuca. Hidalgo, Mexico 28100 Alcobendas (Madrid) Butler, Wisconsin 53007, USA Fax: (61) (2) 9743 8648 Mündelheimer Weg 51 India Tel: (52) 771 33700 Spain Tel: (414) 781-6600 40401 Düsseldorf 30 Tel: 91-22-7631062 Fax: (52) 771 83800 Tel: (34) 1 661 11 25 1-800-433-2766 (End User) CIS Germany Fax: 91-22-7670309 Fax: ( 34) 1 661 47 89 1-800-558-0530 (Distributor) Applied Power Moscow Tel: (49) (211) 47 14 90 Singapore Fax: (414) 781-1049 Leninsky Prospekt 95A Fax: (49) (211) 4714 928/940 Italy Applied Power Asia Pte Ltd.
    [Show full text]
  • Repair Parts Sheet P-80, 1006 and P-84 Hydraulic Hand
    Repair Parts Sheet POWERFUL SOLUTIONS. GLOBAL FORCE. P-80, 1006 and P-84 Hydraulic Hand Pumps L2082 Rev. F 05/17 P-80, 1006 Models with Date Code Beginning with the Letter “D”. P-84 Models with Date Code Beginning with the Letter “A”. Index: To Protect Your Warranty, Use Only ENERPAC Hydraulic Oil. English .....................1-4 Enerpac recommends that all kit components be installed to insure optimum Français ....................5-8 performance of the repaired unit. 4, 3 1 4, 3 5 6 73 7 43 21 8 20 22 A A 11 15 9 23 19 NOTE: Item No. 19 requires removable NOTE: Pump Base is not sold as a service part. thread sealant to external threads. Order complete pump. Figure 1, Pump Assembly Repair Parts List for Figure 1 Item Model P-80, 1006 Model P-801 Model P-84 Qty. Description 1 B113060-1 B113060-1 B113060-1 1 Beam 3 H DA1177349 H DA1177349 = DA1177349 2 Retaining Ring 4 DC106061SR1 DC106061SR1 DC106061SR1 2 Beam Pin (Includes item 3) 5 CN464051SR2 CN464051SR2 CN464051SR2 1 Pump Plunger (Includes Items 3, 4, 6, 7, 8, 9, 11) 6 H C912044 H C912044 = C912044 1 Wiper Ring 7 H B1216565 H B1216565 = B1216565 1 Back-up Ring 8 H B1021503 H B1021503 = B1021503 1 O-ring Packing 9 H B1011803 H B1011803 = B1011803 1 O-ring 11 H B1011564 H B1011564 = B1011564 1 Back-up Ring 15 H P30718 H P30718 = P30718 1 Oil Strainer Screen 19 B245900SR CS605900 B245900SR 1 Reservoir Assembly 20 CL244950W CL244950W CL244950W 1 Filler Plug (Includes item 21) 21 H B159167 H B159167 = B159167 4 Gasket 22 S4123 S4123 S4123 1 Jam Nut 23 B242267 B242267 B242267 1 Pump Rest 43 C7900SR BSS2922D C7900SR 1 Handle Assembly 73 CA561024 CA561024 CA561024 1 Vent H Items are included in Repair Kit P80K4.
    [Show full text]