User Manual 0.7 MB
Total Page:16
File Type:pdf, Size:1020Kb
Handling Instructions 1. This product should be handled with care: avoid letting the product slip, fall, or be struck. 2. Do not hold or place the camera near objects that emit strong magnetic, electromagnetic, or radio waves. Doing so may affect the quality of the image and sound capture. 3. Do not put the camera in direct sunshine or places with excessively high temperatures. 4. Use trusted branded Micro SD cards with this camera, as not all Micro SD cards are guaranteed to be compatible for use with this camera. 5. Avoid placing the Micro SD card in or close to objects or places that give off strong magnetic interference. Doing so may cause data loss. 6. If the product gives off heat, smoke, and/or an unusual smell when charging the battery, immediately unplug the camera from the power outlet to prevent a fire from occurring. 7. When charging the battery, plug into power outlets where children cannot touch, as touching may cause electric shock. 8. Store the camera in insulated places at room temperature and away from direct sunlight and strong electromagnetic waves. Camera Diagram Operating Guide Adding or Removing MicroSD Card Using the camera diagram below, insert or remove the SD card as shown below: Attention:Turn off the camera when adding or removing the MicroSD card. This camera supports Micro SD card above class 6. Please use the high speed TF above class 10 at professional video mode. Inserting or Removing Battery Move the battery cover down and then open it. Install the battery into the camera properly according to the signs of the positive and negative in the battery, and the direction of the arrow. Battery Charging The camera can be charged directly into PC's via USB slot, through a standard power outlet, and by car charger. Startup and Shutdown Startup: Press and hold the power/mode button for about 3 seconds. Shutdown: Press and hold the power/mode button for about 3 seconds. Power saving mode: The camera will shutdown automatically after 15 seconds if it runs idle by default (the power saving mode setting can be changed) Mode Switch: Pressing the power button while it is on will toggle and show the video, photo, Slow photography, or settings menu mode, like this: Video interface: Click “OK” to start recording, you can see the recording time and video mode on the LCD screen. Click the “OK” again to stop recording and save the file. You can enter the video setting by Clicking “Down” button. Photo interface: Taking photos by clicking the “OK” button.. You can enter the photo setting by Clicking “Down” button. Slow photography : Press the “OK” key to start recording for slow photography mode and the default resolution is 1440p/60fps. The upper left corner of the screen will show When playback, the slow photography is slow motion. Shortly Press “Down” key to enter into Slow photography settings. Setting Press OK key to enter Setting to select record video, take photos, language and so on: Connect PC cameras: Select”U disk mode” to manage TF card data Select”DV mode“to use PC camera function Select”charging”to panoramic DV charging HDMI Out: When the camera is on, connect HDMI cable(Optional) to any HDMI-compatible display to playback the video. 2,WIFI light(Blue) When the Wi-Fi is turned on, the blue light will come on. When the Wi-Fi is connecting , the blue light will flash. When the Wi-Fi is turned off, the blue light will turn off. 3,Charging light(Red) When the camera is turned on, the red light indicator will flash 3 times. When charging, the red light is on; When the camera is fully charged,the red light will turn off; Button instructions Power button: Press and hold the power button for 3 seconds on the Power button to turn on/off the camera. When the camera is on, press the power button to toggle Recording, Photography, Slow motion, Settings modes. To exit the settings menu, just press the power button. OK button Press the OK button to record, take pictures, capture slow motion, and choosing settings. WIFI /UP button In the Settings menu, press the up button to scroll upward. You can also turn the Wi-Fi on on off by the up button. Down button In the Settings menu, press the down button to scroll upward. Using the Liiv360 Wi-Fi Remote Control App for iOS or Android To begin, install the download and install Liiv360 Wi-Fi application, which can be found in theApple iOS Store and in the Google Play Store for Android. You can also scan the QR code below. Note: For Andriod system smartphone, please search “XDV360”in Google Play, download and install this APP on the smartphone;For IOS system smartphone,please search “VDX360” in Apple store, download and install accordingly. How to connect WIFI APP 1. Press and hold down the up button for about 3-5 seconds to turn on the Wi-Fi. A Wi-Fi icon should appear on the screen which will then display the Wi-Fi SSID and password to connect with your mobile device. The WIFI indicating light will also flash at the same time. 2. Enable Wi-Fi on your mobile device and connect to the camera by the given Wi-Fi SSID and password. 3. Point and open the MaxXmove app. Using the app, you can preview the shooting screen on your mobile device remotely, as well as play back, share, download, and delete files. 4,WIFI APP QR code Scan this QC Code to download the Liiv360 app: Product Specifications : DSP Allwinner V3 Sensor SONY IMX179 Video Resolution: 2448×2448 30fps (1:1) 2048×2048 30fps (1:1) Video Resolution 1440×1440 60fps (1:1) 1440×1440 30fps (1:1) 1072×1072 60fps (1:1) 1072×1072 30fps (1:1) Photo Resolution: 16M(4096X4096) (1:1) Photo Resolution 12M(3264*3264) (1:1) 8M(2880*2880) (1:1) 5M(2448x2448) (1:1) Lens 220°FOV Exposure -3, -2, -1, 0, 1, 2, 3 White Balance Automatic, sunny, cloudy, incandescent, fluorescent Ordinary photography, regular photography, automatic photography, Camera Mode trajectory photography Video Mode Normal video、Loop Video、Space lapse Square、Round、Half round、Inner Rim、Half-Half、360° Panoramic、 APP Show Mode VR Slow Motion 1440p 60fps Display 0.96"Matrix Screen LCD Remote Support 2.4G Remote(Optional) Image Format JPEG Video Format MP4 Light Source H.264 Frequency Connections Micro USB2.0, HDMI Microphones Build in Speaker 1w Built-in 8 ohms 1w Battery capacity 1000MAH (removable battery) Record time 1440P/ About 120 minutes Fixed Interface International standard 1/4 inch standard threaded connection Charging time About 2-3 hours WIFI 802.11b/g/n, 2.4G English, Simplified Chinese, Traditional Chinese, Korean, Russian, Language French, German, Italian, Spanish, Portuguese, Japanese Operating system Windows XP/7/8.1/10/Vista and Mac 10.5 or above Dimensions 45mm*44mm*56mm Weight 63g (camera), 80g (including battery and memory card) Operating -10℃~+55℃ temperature storage temperature -20℃~+70℃ Relative humidity 5% ~ 95%(No frost) waterproof level With a waterproof cover underwater 30M Manual, charger, USB cable, waterproof cover, tripod, batteries; Accessories RF remote control (optional), HDMI cable (optional), car charger (optional), car bracket (optional) Outdoor Sports, Cycling, Diving, aerial, real estate, performances, VR Application mirror, etc..