Instruction Manual Model No: Ar3220
Total Page:16
File Type:pdf, Size:1020Kb
INSTRUCTION MANUAL MODEL NO: AR3220 AtGames Digital Media, Inc. www.atgames.net IMPORTANT: READ BEFORE USE In very rare circumstances, some people may experience epileptic seizures when viewing flashing lights or patterns in our everyday life. Flashing lights and patterns are also common to almost any video game. Please consult your physician before playing ANY video game if you have had an epileptic condition or seizure OR if you experience any of the following while playing - Altered vision, eye or muscle twitching, mental confusion or disorientation, loss of awareness of the surroundings or involuntary movements. It is advised to take a 20-minute rest after 1 hour of continuous play. Classic Game Console Appearance and Key List The image below shows the location of the connectors and buttons. Each function is outlined below (the illustration is for reference only). 1 2 8 9 3 4 5 6 7 1 Power 6 Left Player Game Controller Jack Turn the game console’s power Game controller connected to this ON/OFF. jack controls games in 1-player games and controls the first player 2 START (Original RESET Button) in 2-player games. Note that some Press this button to begin or 2-player games alternate use of the reset most games. left player. 3 Difficulty Button - Left Player 7 Right Player Game Controller Jack Press this button to switch Game controller connected to this between one of two difficulty jack controls the second player in levels in most games. 2-player games. 4 Difficulty Button - Right Player 8 AC Adaptor Jack (DC 5V) Press this button to switch The power adaptor plugs into this between one of two difficulty port, then into your AC outlet. levels in most games. 9 AV Cable 5 SELECT Audio and video output. Select game option. 1 AC Adapter Specification Input Instruction INPUT: 100V-240V If your TV does not have a dedicated composite input, it may support such a AC/50HZ-60HZ connection through a shared component input. For TVs with shared compo nent OUTPUT: 5V DC/500mA inputs, the diagram below indicates a typical setup, with the yellow composite PLUG: video connector plugging into the green component video input. Refer to your NOTE TV's manual for additional information on available ports and how to change • Must use the AC adapter included as power supply to the console. inputs once connected. • Do not connect the AC adapter to the power input other than the above specifications. • AC adapter is not a toy. • The socket-outlet shall be installed near the equipment and shall be easily accessible. Wired Game Controller Appearance and Key List The image below shows the appearance and key list of the wired game controllers (the illustration is for reference only). 1 1 Joystick Push joystick to move. 2 2 BUTTON Press button for most in-game actions. What can I do if my TV can only support HDMI input? Check out AtGames Flashback Zone for products that support HDMI http://atgames.us/. What are the two controller ports on the console for? How to connect the console to a TV? These ports are for the included wired joysticks and optional paddle controllers. 1. Connect the game console to TV using the enclosed AV cable. These ports are also compatible with original Atari 2600 wired joysticks and 2. Press the power button on the game console after configuring the TV paddle controllers. POWER input to AV or Composite input. NOTE How to connect wired controllers? Display results will vary by TV. Consult your TV's manual to adjust Brightness, Sharpness, Contrast, Aspect Ratio, and other features for best display results. For 1 player games: Connect a wired controller to the left controller port. Do not unplug AV cable when console is on. Otherwise, please press POWER button to For 2 player games: Connect a second wired controller to the right controller restart the console. port for player two. 2 3 How do I start playing? This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must 1. POWER Press the button to turn on the game console. accept any interference received, including interference that may cause undesired operation. 2. Use the player 1 (P1) controller that is connected to the port to browse menu and select game. Move the joystick of P1 controller left and right to navigate the menu pages, and move up and down to highlight games on each page. PROBLEM SOLUTION 3. FIRE Press the button on the controller to select the highlighted game. Connect the AC adapter. Connect the A/V cable. No picture on the screen Turn the console unit On. How do I play the 3- and 4-player games? Turn the TV On. Set the TV to AV input. The 3- and 4-player games are designed for paddle controllers. Please plug Screen flickers or no color Adjust TV color controls. your paddle controllers into each controller port on the game console. Increase or turn on the TV volume. No game sound Connect the AV cable. How do I adjust the game level? Adjust the vertical and horizontal hold controls on your TV until the picture SELECT Press the button on START Press the button to Picture on TV screen is unsteady the game console. begin the selected level becomes steady. in most games. Connect the AV cable. Power Off the console and then power On the Picture is blinking or distorted console. How do I go back to game menu while playing the game? Picture background color varies at This is normal. the beginning or end of the game. START SELECT Press the START button and SELECT button on the console Press START to enter or restart the game. simultaneously, and the screen will go back to the game menu. What do I do when the controller is not working? If you only have a controller plugged into the P2 socket, turn off your console and Safety Notice connect the controller to the P1 (left) controller port. Then, turn on the console and try it again. You might notice slight delay with joystick controller in games which are designed • Do not submerge the game console in water or expose it to extreme heat or to strong for paddle controllers. Please plug your paddle controllers into each controller magnetic fields. Doing so may cause permanent damage to your game player. • Always use dry towel to clean the game console and controllers. port on the game console. (Purchase additional accessories at ) www.atgames.us • Transformers suitable for indoor use only. Transformers and power supplies for toys are not intended to be used as toys, and the use of these products by children shall be What do I do when the power supply is not working? under the full supervision of parents. You might be using the wrong AC adapter. Please use the one included in the Warning package, which is rated for 5V/500mA. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. How do I play with wireless controllers? IR-based controllers from previous AtGames' consoles are not supported. 4 5 NOTE Game Description This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Game title: 3-D Tic-Tac-Toe installation. This equipment generates, uses and can radiate radio frequency MENU TITLE: 3-D TIC-TAC-TOE energy and, if not installed and used in accordance with the instructions, may Place four X’s or four O’s in one horizontal, vertical, or diagonal row, or through cause harmful interference to radio communications. However, there is no all the panes. Play against an opponent or against the computer. To win, guarantee that interference will not occur in a particular installation. If this complete a row first. equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is Game title: Adventure encouraged to try to correct the interference by one or more of the following MENU TITLE: ADVENTURE measures: • Reorient or relocate the receiving antenna. Rescue the Enchanted Chalice stolen by an evil magician and return it to the Golden Castle without getting eaten by evil dragons. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Game title: Adventure II • Consult the dealer or an experienced radio/TV technician for help MENU TITLE: ADVENTURE II In this remixed sequel, once again rescue the Enchanted Chalice stolen by an With certain TV models, e.g., Vizio VOJ320F1A, SONY KDL-32BX310, SONY KDL-32EX308, evil magician and place it inside the Golden Castle. SONY KDL-46HX729, SONY KDL-50R550A, LG 47LA6900, LG 55UB8500, Samsung UN40C7000WF and Panasonic TC-58AX800U0, this console may be incompatible and cause undesired effects, like display shifting, which results in the picture not being centered Game title: Air Raiders on the screen. Or horizontal display noise, it might move up and down on the screen. If this MENU TITLE: AIR RAIDERS happens, try the console on a different display or return the console to the point of purchase. As the pilot of your bomber, your mission is to blast the enemy out of the sky.