Colour Guide This colour guide features the most popular colours produced for our clients from the wide and varying colour systems used throughout the world.

In addition to the colours illustrated we are able to match the majority of colours featured in the full range of worldwide colour cards including BS.381C; BS.4800;

RAL; AFNOR; Federal Standard and NCIS. In addition, we can manufacture close matches to Pantone colours. It should be borne in mind that Pantone inks are usually brighter in colour than can be achieved with paints.

The colours illustrated are typically available in a wide range of products. These include the Rockhard range of baking epoxy finishes; low VOC 2 pack cold cure epoxy finishes; low VOC 2 pack cold cure polyurethane finishes and specialised aircraft finishes. The majority of colours are available in gloss, semi-gloss, semi-matt and matt finishes.

In addition to the finish colours illustrated, a full range of compatible primers, both chrome free and chrome containing are available.

All Indestructible products are manufactured to rigorous quality standards, in line with our AS.9100 approval, in addition to the many international client standards and specifications held.

Full details on all product ranges and approvals are available from our UK office or from our chain of worldwide distributors. Engineered Coatings and Coatings for Engineering

BS381C Range of Colours

Aircraft381C:693 Grey Roundel381C:110 Sea381C:217

Olive381C:298 Drab UK381C:285 Nato Green Golden381C:356 Yellow

Nato Blue* Camouflage381C: 380 Desert Sand Signal381C:537

Cherry381C:538 International381C:592 Light381C:627 Aircraft Grey

Light381C:631 Grey Dark381C:632 Admiralty Grey Medium381C:637 Sea Grey

Light381C:697 Admiralty Grey Oxford381C:105 Blue Olive381C:220 Green

Camouflage381C:626 Grey Dark381C:629 Camouflage Grey Dark381C:420 Camouflage Desert Sand

Service381C:499

*Nato Blue is correct at time of going to press using UK specification however, this is not yet globally confirmed. RAL Range of Colours

Reseda6011 Green Mahogany8016 Brown Traffic3020 Red

Light1015 Ivory Middle6003 Oilve Green Turkish6027 Green

Dark7000 Squirrel Grey Silver7001 Grey Telegrey7047 4

Sepia8014 Brown Pale6034 Turquoise Ivory1014

Oyster1013 White Pale6021 Green Pure9010 White

Fed Stan Range of Colours

Semi26307 Gloss Grey Off27875 White Light27722 Oyster

11136 26231 Textron16081 Grey Ruby Red US Sea Grey

Grey17875 White US13538 Golden Yellow Lemon13655 Yellow

US14052 Dark Drab US26173 Aircraft Grey Afnor Range of Colours

AFNORA530 Bleu AFNORA310 Jaune AFNORA110 Orange

AFNORA805 Rouge GrisA605 Blue ChamoisA215

GrisA640 Clair BleuA520 Fonce BleuA505 Nuit Matt

GrisA624 Blue Clair Noir9000 Clair

4800 Range of Colours

Flake4800: Grey 10 A (Queen’s 03 (2660 Flight) 90-94) Cream4800: 10 White B 15 Ash4800: Grey 00 A 01

All colours can be supplied in either matt, gloss or satin finishes.

IMPORTANT: The colours shown on these pages are approximate representations. This guide should not be used to match colours of coatings. The accuracy of this document is limited by the capability of the standard process colour printing method. Indestructible Paints Ltd. does not accept any responsibility for variations. Please contact us for an actual coating sample prior to placing any order. Indestructible Paint Limited. 19-25 Pentos Drive, Sparkhill, Birmingham B11 3TA. UK. Tel: +44 (0)121 702 2485 Fax: +44 (0)121 778 4338 Email: [email protected] www.indestructible.co.uk

Engineered Coatings and Coatings for Engineering