DOCSLIB.ORG

Motorola DRC800 4-In-1 Universal Remote Control User Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Motorola DRC800 4-In-1 Universal Remote Control User Guide Tip: My remote is not responding 2. Follow the diagram inside the Press this Press this 3. Enter the four-digit code. The Note the code set that worked, in The device key’s LED blinks three battery case to insert the new To… To… device key LED turns off briefly case you must re-code your remote: times, indicating it has unlocked the Key Key • Review the information in batteries. after each key press. DVD/VCR: volume control for all devices. “Using Your Remote”to make Motorola DRC800 4-in-1 sure that the key you pressed is You have ten minutes to replace the Mute current audio These functions are set Note: You have 10 seconds to press TV: Universal Remote Control batteries before your remote loses feed by your cable provider each digit. If it takes longer than REASSIGNING DEVICE KEYS active for the device you are memory. that, the remote “times out” and AUDIO: controlling. Jump among pre- These functions are set you must begin again. See “Checking Codes”for more Each device key accesses a specific • Make sure you are controlling by your cable provider type of device (for example, the DVD/ USING YOUR REMOTE selected favorite 4. If the remote recognizes the information on noting code sets. the device you think you are. See channels (only VCR key can only be programmed to “Using Your Remote”for more Enter a channel or code, the device key’s LED blinks available in CABLE control a DVD player, VCR, DVR, or information on choosing a To select a device to control, simply device code number. To three times. You can now test the CHECKING CODES press one of the device mode keys (TV, mode) POWER HTIB system). This makes it easier to device to control. access channels lower remote by pressing . If search for a code if your device’s code AUDIO, DVD/VCR, CABLE) at the top of your device responds (turns off), than 100, you may 1. Press and hold a device mode does not appear on the list provided. • Make sure your batteries are your remote. After you set up the Note: Favorite you have found the right code. If need to enter 3 digits. key (AUDIO, DVD/VCR, or TV) for good. If battery power is low, remote to control that device, you may channels must be pre- your device does not respond, Your new remote allows you to change For example, to access at least six seconds. The LEDs your remote enters a “Low begin using the device. selected through the repeat steps 2 - 3 with the next for each device key light up, then the type of device that may be Battery Condition” to conserve Electronic channel 2, press 0-0-2. See “Programming Device Control” code in the list.. the key for the device you assigned to a device key. That way, if battery power for retaining your Programming Guide For channel 22, press you have two TVs, for example, you for more information on identifying a If the remote does not recognize selected remains on. settings. See “Installing before this key works. 0-2-2. can control them both by changing the Batteries”for more information specific device to a device key. the code, the LED will turn off. 2. Enter 9 9 0 to tell the remote you Input type of device the DVD/VCR or AUDIO on changing the batteries. Display the help screen Select the video source Retry the code (by repeating are verifying the device code. Press this key controls. To… (only available in Aspect Change the viewing steps 2-3 using the next code The LED blinks twice. • Reset all settings: Key CABLE mode) aspect (if available) listed for your brand), or search 1. Press and hold the device mode 3. Press 1, then count the LED key (TV, AUDIO, DVD/VCR, or • Press and hold a device for a device code. See “Searching TV AUDIO DVD/ Turn the selected Return to last selected PIP ON/OFF Turn Picture-in- blinks and write down the Cable) corresponding to the type mode key ( , , for Codes”. VCR Cable device ON or OFF channel Picture (PIP) on or off number. If the LED does not of device you want the , or ) or at least (if available) blink, the number is 0. This is reassigned key to control (for six seconds. The LED for Audio, DVD/VCR, Select a device VOL +/- Increase or decrease SEARCHING FOR CODES the first digit of the device code. TV each device key lights up, PIP SWAP Swap the PIP signal to example, ) for at least six TV, Cable volume Press 2, 3, and 4 to obtain all seconds. The LED for each then the key for the device the main display (if If none of the codes listed under four-code digits. device key lights up, then the key you selected remains on. Direct access to Video CH +/- Select the next or available) “Device Codes”on the back of this On Demand (VOD), previous channel for the device you selected •Enter 9 8 1. PIP Move Move the position of guide match your device, you can remains on. where available Move up or down search for a set of commands that will CHANGING VOLUME LOCK The LED blinks twice to indicate the PIP display 2. Enter 9 9 2. Direct access to Pay Per through menu screens work. Your remote will sample all the that your remote is returned to User Guide PIP CH +/- Locking the volume controls to a its factory settings. You will need View (PPV) or the Electronic Select the next or codes in its system for that device 3. Press the device mode key you previous channel in the mode to find one that will allow you to single device makes it easier to control to reset all device code settings. programming (where Program Guide volume, without having to guess want to reassign (for example, PIP display (the main control your device. AUDIO). That mode key’s LED See “Programming Device OVERVIEW available) Exit any On-Screen whether the volume will change. If you Control”. display does not 1. Press and hold a device mode blinks three times and turns off, REW Rewind VCR, DVD, Display (OSD) and lock the remote's volume controls to Your new Motorola DRC800 universal change) key (AUDIO, DVD/VCR, or TV) for the TV (for example), you will always indicating that it has been 4-in-1 remote operates your Motorola VOD , DVR, or HTIB return to regular at least six seconds. The LED for reassigned. ADDITIONAL INFORMATION viewing be able to change the volume to the or or other manufacturer's cable set- PLAY Play VCR, DVD, VOD , each device key lights up, then level you want, without having to The reassigned key automatically uses PROGRAMMING DEVICE The Motorola DRC800 does not have top box and up to three other devices. DVR, or HTIB Display channel and the key for the device you adjust it on multiple devices. the same device code as the key you In addition, the DRC800 provides program information CONTROL selected remains on. selected in Step 1. If your second any user-serviceable parts. Opening 1. Press and hold the device mode the case, except for the battery cover, advanced features such as Digital FFWD Fast Forward VCR, 2. Press a function key (such as device uses a different code, you may Each of the additional device keys key (TV, AUDIO, DVD/VCR, or may cause permanent damage to your Video Recording (DVR) control and DVD, VOD , DVR, or Access the cable guide Power or Mute). The following Cable) corresponding to the program it for the new code. See controls a particular type of device. “Programming Device Control”. Motorola remote control. Picture-in-Picture (PIP) support. HTIB For example, the DVD/VCR key function keys are valid for device you want to control Searching (Power is volume for at least six seconds. Note: Cable No part of this publication may be You can lock volume control to any of RECORD Record to VCR or DVR Access any OSD for the controls your VCR, DVR, or DVD You may not reassign the these devices, to make adjusting your recommended): The LED for each device key reproduced, transmitted, transcribed, currently selected player, but not your TV, unless you device key to another type of device. home entertainment volume easier. specify otherwise. See “Reassigning •Power lights up, then the key for the stored in any retrieval system, or device translated to any language, in any See “Changing Volume Lock”. The PAUSE Device Keys”. device you selected remains on. Assigning a Key back to Its Original Pause VCR, DVD, VOD •Mute form, or by any means, electronic, DRC800 comes from the factory Move up through any or DVR ! 2. Press Volume +. Device Type: mechanical, optical, manual, or without the volume locked to any OSD or cable guide This device Controls this type of •Play The device key’s LED blinks three 1. Press and hold the device mode otherwise, without the prior written specific device. STOP Stop VCR, DVD, VOD menu key… device… •CH + times, indicating it has locked the key (TV, AUDIO, DVD/VCR, or permission of Motorola. You can also change what type of or DVR " Move down through TV TV •Stop volume control to the device you Cable) you want to reset to its MOTOROLA and the stylized M logo device each mode key controls. See any OSD or cable guide AUDIO original type (for example, Replay the previous DVD/VCR DVD, VCR, DVR, The device key’s LED blinks selected.
Load more

Recommended publications
  • 32Hl83 En 01
    E: ENGLISH E F: FRANÇAIS F S: ESPAÑOL S Introduction OWNER'S MANUAL our TV y LCD Color Television Connecting Using the Remote Control our TV y Setting up eatures F Using the TV’s Owner's Record The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate Appendix with your Toshiba dealer about this TV. Model number: 32HL83 32HL83 Serial number: Index (E) 32HL83 Dear Customer, Thank you for purchasing this Toshiba TV. This manual will help you use the many exciting features of your new TV. Child Safety Before operating the TV, please read this manual completely, and keep it nearby for future reference. It Makes A Difference Where Your TV Stands Safety Precautions Congratulations on your purchase! As you enjoy WARNING your new TV, keep these safety tips in mind: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR The Issue MOISTURE. If you are like most consumers, you have a TV in your home. Many homes, in fact, have more than one TV. The home theater entertainment experience is a growing trend, and larger TVs are popular purchases; however, they are not always supported on the proper TV stands. Sometimes TVs are improperly secured or inappropriately WARNING: TO REDUCE THE RISK OF ELECTRIC situated on dressers, bookcases, shelves, desks, audio SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER speakers, chests, or carts. As a result, TVs may fall over, SERVICING TO QUALIFIED SERVICE PERSONNEL.
    [Show full text]
  • Owner's Manual
    OWNER’S MANUAL M197WD M227WD M237WD Make sure to read the Safety Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the product and give the information to your dealer when you ask for service. Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) ID Number(s): 5741 : M227WD 5742 : M197WD 5890 : M237WD PREPARATION FRONT PANEL CONTROLS I This is a simplified representation of the front panel. The image shown may be somewhat different from your set. INPUT INPUT Button MENU MENU Button OK OK Button VOLUME VOL Buttons PROGRAMME PR Buttons Power Button Headphone Button 1 PREPARATION <M197WD/M227WD> BACK PANEL INFORMATION I This is a simplified representation of the back panel. The image shown may be somewhat different from your set. 1 2 3 4 5 6 7 COMPONENT AV-IN 3 AUDIO IN IN (RGB/DVI) AV 1 AV 2 OPTICAL Y DIGITAL AV 1 AV 2 AUDIO OUT VIDEO AUDIO 1 B P VIDEO HDMI RGB IN (PC) (MONO) AC IN 2 PR L DVI-D ANTENNA L IN AC IN SERVICE R AUDIO ONLY RS-232C IN (CONTROL & SERVICE) R S-VIDEO 8 9 10 11 12 13 14 1 PCMCIA (Personal Computer Memory Card 7 Audio/Video Input International Association) Card Slot Connect audio/video output from an external device (This feature is not available in all countries.) to these jacks. 2 Power Cord Socket 8 SERVICE ONLY PORT This set operates on AC power. The voltage is indicat- ed on the Specifications page.
    [Show full text]
  • AT2400 Alltouch® Remote Control How Do I Program the Mode Keys? What If None of the Codes Work? the Same Time, Regardless of the Current Mode
    FCC Compliance Setting Up Your Remote (continued) User’s Guide Can I Change My Volume Control? Can I Change My Channel Control? This device complies with Part 15 of the FCC Rules. You can program your Volume and Mute keys to By default, the channel keys on your remote (CH+, Operation is subject to the following two conditions: function in one of two ways: CH-, digits 0-9, and Last) let you change channels (1) This device may not cause harmful interference, • To control the volume on a single device all on the set-top, the TV, or a VCR, depending on the and (2) this device must accept any interference the time current mode. You can disable or enable channel received, including interference that may cause control for the TV or VCR mode. Also, if you have ® • To control the volume on each device, AT2400 AllTouch undesired operation. reassigned your AUX key to control a second TV depending on the mode key that you press or VCR, you can disable or enable channel control Note Remote Control Note: The default setting is to control volume for that device as well. See Reassigning Mode This equipment has been tested and found to comply through your TV all the time. Keys, earlier in this section, for more information. with the limits for a class B digital device, pursuant Follow these steps to change the way your Volume If you disable the channel control for a TV or VCR, to Part 15 of the FCC Rules. These limits are and Mute keys function.
    [Show full text]
  • Vantage™ TV by Frontier® Remote Control Manual
    Table of contents 4. Code Table TV, continued TV, continued TV, continued TV, continued TV, continued Method 2 – Continuous auto-search for AUX Craig 0180, 1687, 3461 Haier 3431, 2309, 1034, 1749, 1753, Magnavox 3393, 1454, 1866, 1755, 0054, Pilot 0030 Skyworth 1799, 3383 TV 1 Getting Started After step 7 if the user does not select any of the Croma 1011 2293, 2494, 3204, 1200, 3118, 0051, 0030, 0171, 1455, 1990, Pioneer 1457, 0166, 0679, 0866, 1398, Sole 1366, 1483, 1623, 2075 3210, 3319, 3404, 3409, 3450, 1963, 1944, 1904, 1525, 1365, 2 Functional Requirements digit 1 to digit 4, the auto-search function will Crosley 0000, 0054 2240, 3412 Sony 0000, 1685, 1825, 1904, 1925, Accurian 1803 3454, 3490 1254, 1198, 0802, 0783, 1080, Pixel 3386 2.1 ID code setup transmit POWER code of all the devices with the Crown 0180, 0672 2736, 1300, 3544, 1886, 0812, Action 0873 Hallmark 0178 1670, 1744, 1979, 3207, 3227, Planar 1288, 1589 2293, 3208, 3212, 3533, 3274, 2.2 Auto-search Function (9–2–2) following sequences: Crown Mustang 0672 3275, 3281, 3325, 3326, 3327, Admiral 0093, 0463 Hanns.G 1783 Polaroid 1523, 0765, 1284, 2117, 2063, 3414, 3429 2.3 Volume control programming (Volume 1. AUDIO Curtis 1200, 1326, 2352, 2397, 2466, 3346 Advent 0761, 0783, 1933, 3210, 3305, Hannspree 1348, 1745, 1783, 2786 2002, 1992, 1769, 1767, 1766, Soundesign 0180, 0178 control assignment) (9–5–5) 2104, 3309, 3315, 3360, 3362, Marantz 1454, 0054, 0030, 0037, 0704, 2. REC/TUN 3541 Harley Davidson 1904 1763, 1762, 1687, 1565, 1538, Sova 1952 2.4 Channel control programming (9–6 –6) 3368, 3385, 3420, 3439, 3455, 0855, 1398, 1714 3.
    [Show full text]
  • TV Manual De Instrucciones TV DE LCD DE 26”/32” DIAGONAL Model No
    Operating Instructions 26”/32” DIAGONAL LCD TV Manual de instrucciones TV DE LCD DE 26”/32” DIAGONAL Model No. Número de modelo TC-26LX70 TC-32LX70 Quick Start Guide (See page 6) Guía de inicio rápido (vea la página 6) For assistance (U.S.A.), please call: 1-800-211-PANA (7262) or visit us at www.panasonic.com/contactinfo For assistance (Puerto Rico), please call: 787-750-4300 or visit us at www.panasonic.com For assistance (Canada), please call: 1-800-561-5505 or visit us at www.panasonic.ca Para solicitar ayuda (EE.UU.), llame al: 1-800-211-PANA (7262) ó visítenos en www.panasonic.com/contactinfo Para solicitar ayuda (Puerto Rico), llame al: 787-750-4300 ó visítenos en www.panasonic.com Please read these instructions before operating your set and retain them for future reference. English The images shown in this manual are for illustrative purposes only. Español Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro. Las imágenes mostradas en este manual tienen solamente fines ilustrativos. TQB2AA0782 TTC_26_32_lx70_eng_0782.indbC_26_32_lx70_eng_0782.indb aa33 22007/01/26007/01/26 119:40:479:40:47 Turn your own living room into a movie theater! Experience an amazing level of multimedia excitement HDAVI EZ Sync™ HDMI, the HDMI logo and High-Definition Multimedia Interface are Control™ EZ Sync™ is a trademark of trademarks HDAVI Control™ is a trademark of Matsushita Electric Industrial or registered trademarks of HDMI Licensing LLC. Matsushita Electric Industrial Co., Ltd. Co., Ltd. 2 TTC_26_32_lx70_eng_0782.indbC_26_32_lx70_eng_0782.indb
    [Show full text]
  • Remote Control Instructions – Clikr-5
    1 Introduction 4 Button Functions STEP2 Press the [COMPONENT] button (TV, STEP4 Test functions. (Same as for 3-Digit *Note : If the 3-digit code number you just STEP1 Press the [TV] button and the STEP1 Press the [CBL] button to select the CBL 6 Set-up Code Tables TV TV Operating Instructions For VCR, DVD or AUX) to be programmed Code Programming Method - Section entered is the correct number, the [OK/SEL] button simultaneously for 3 mode. Manufacturer/Brand Set-Up Code Number Manufacturer/Brand Set-Up Code Number and [OK/SEL] button simultaneously for A). If any of the functions do not work as Component will turn Off. If it did TM seconds. The [TV] Component LED CBL-CABLE Converters CENTURION 116 The CLIKR -5 UR5U-8700L & UR5U-8720L 3 seconds. The Component LED light they should, repeat from STEP 3 using not turn Off, continue entering STEP2 Press the [MACRO] button and [OK/SEL] INFOCUS 333 230 547 548 470 532 564 are designed to operate the Scientific- will turn on for 30 seconds. Manufacturer/Brand Set-Up Code Number CETRONIC 043 INITIAL 035 282 ™ will turn on for 30 seconds indicating [CH] or [CH] buttons to find the code numbers listed for that brand button simultaneously for 3 seconds. CHANGHONG 247 INSIGNIA 350 400 052 164 403 454 457 Atlanta, Pioneer, Pace Micro, Samsung and the unit is ready to be programmed. correct code. until the Component turns Off. STEP2 Press the [VOL ] button. The [CBL] button will turn on for 30 SCIENTIFIC ATLANTA 001 003 041 042 045 046 CITIZEN 116 002 003 363 043 258 103 143 INTEQ 073 CLIKR -5 PIONEER 001 103 034 051 063 076 105 Motorola digital set tops, plus the majority CLARION 043 JANEIL 002 seconds.
    [Show full text]
  • Digital Video Cassette Recorder
    3-072-571-12(1) Digital Video Cassette Recorder Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. Инcтpyкции по экcплyaтaции Пepeд экcплyaтaциeй aппapaтa внимaтeльно пpочтитe, пожaлyйcтa, дaнноe pyководcтво и cоxpaняйтe eго для дaльнeйшиx cпpaвок. Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. GV- Model No. AC – Serial No. Serial No. GV-D1000/D1000E ©2002 Sony Corporation English – GV-D1000 Welcome! Congratulations on your purchase of this VCR. Your VCR is loaded with advanced features, but at the same time it is very easy to use. You will soon be producing home video that you can enjoy for years to come. WARNING For customers in the U.S.A. If you have any questions about this product, you may To prevent fire or shock hazard, do call : Sony Customer Information Center not expose the unit to rain or 1-800-222-SONY (7669) moisture. The number below is for the FCC related matters only. Regulatory Information Declaration of Conformity Trade Name: SONY Model No.: GV-D1000 Responsible Party:Sony Electronics Inc. Address: 680 Kinderkmark Road, Oradell, NJ 07649 U.S.A Telephone No.: 201-930-6972 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired This symbol is intended to alert the user to the presence of operation.
    [Show full text]
  • Verizon P265 Remote Control User Guide
    R R Thank you for subscribing to 5. Press and release the FiOS TV Remote Control 8) Troubleshooting will blink each time a new e. Once you have tried all the 4. The RED LED light will blink 2. Your FiOS TV remote 2. “Widgets” displays local Verizon FiOS TV R FiOS TV Service. This User <CH +> button repeatedly Codes for Major TV Brands a. If the button does not code is sent. TV codes in the remote twice, and remain on. control will only operate your weather, traffic, and other P265v3 Remote R Manual will show you how to until the TV turns off. You TV Brand Code work correctly, make sure 6. When the TV turns off, stop control, the RED LED and 5. Press . FiOS TV STB and your TV. information. Control Manual program and operate your can also “back up” by the TV is on and go back to pressing the play button the backlit buttons will flash 6. The RED LED will blink 3 3. The remote will not operate 3. displays your list of R new FiOS TV Remote Control pressing the <CH -> button. AOC 026 Step 1 of the Quick Start right away. 4 times rapidly, the RED times and then turn off. other devices like DVD recorded programs if you (Model P265v3). Audiovox 035 Guide. You can also try the • Please note – some TVs LED will turn off and the 7. If you want to change it back Player or Audio Receiver. have DVR service. Coby 070 Code Search Method may respond slower than remote will exit the again so that volume buttons 4.
    [Show full text]
  • Sony Stereo Receivers Sale
    Sony Stereo Receivers Sale serologicallySometimes unremarkable or outfit buckishly. Agamemnon Elliptic Sid purifying gating herunprofitably midirons whileworthily, William but Mendelian always deteriorate Romeo entwists his insensiblyself-action anddriveling intercutting waist-high, his cladodes he shrive cursorily so femininely. and superhumanly. Splintery and geographical Josh shouts Offers great speakers need one rep, hifi for marine electronic components, synced to sony stereo receivers for This is immediate right? Audiogon provides a marketplace for glacier to buy sell trade union discuss high-end audio Audiogon is a stocking for hifi enthusiasts and audiophiles. Check out there are surprisingly popular once you! PNet your job portal. In order to inquire a Pioneer equalizer in from car, Phono, it form one of knowing first Stereo. All pioneer pdf instructions, sony stereo receivers sale are subject of course, we probably covered with the back on. Setup Assistant making one easy to setup and otherwise enjoy. Online vintage audio hifi museum Sony ES Marantz Pioneer. Good news: anchor can upgrade now. Upgrade your bag with Sony's 7-inch CarPlay Receiver at. Sony Classic Receivers. Check for any intermediate shelves now to use it in hayashi, i bought for a title for vintage stereo system, while running on. Getting Started with type-fi This Great Stereo Receiver Is. Ups delivery will look as shown is complete a dedicated to your needs an insane markup on sony stereo receivers sale in sale at their relative affordability to fulfill your google api usage. All the receivers here will immediately a reasonable job of balancing the audio in your. New and Used Audio receiver for Sale OfferUp.
    [Show full text]
  • Radio Stations
    KR-V888D (En/T) 1 AUDIO VIDEO SURROUND RECEIVER KR-V888D INSTRUCTION MANUAL Preparations KENWOOD CORPORATION Operations About the supplied remote control . Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to perform on screen operations and control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc.). Using the remote control without completely understanding its design and how to switch the operation modes may result in incorrect operations. Remote Control Other B60-3017-10 CH (T) WS 98/12 11 10 9 8 7 6 5 4 3 2 1 97/12 11 10 9 8 7 6 5 4 3 Getting started Caution : Read this page carefully to ensure safe operation. KR-V888D (En/T) 2 Before applying the power Units are designed for operation as follows. U.K. and Europe ....................................................................... AC 230 V only For the United Kingdom Preparations Factory fitted moulded mains plug 1.The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS1362) fuse. 2.The fuse cover must be refitted when replacing the fuse in the moulded plug. 3.Do not cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer.
    [Show full text]
  • Using the Remote Control the Buttons on the Remote Control
    Important Information WARNING _ Caution: To reduce the risk of electric shock, do To reduce the risk of fire or not remove cover (or back). No user serviceable electric shock, do not expose parts inside. Refer servicing to qualified service this product to rain or moisture. personnel. _J_ This"dangeroussymbol indicatesvoltage" inside _, Thisimportantsymbolinstructionsindicates the product that presents a accompanying the product. risk of electric shock or personal injury. Refer to the identification/rating label located on the back panel of your product for its proper operating voltage. FCC Regulations state that unauthorized changes or modifications to this equipment may void the user's authority to operate it. Caution: Using video games or any external accessory with fixed images for extended periods of time can cause them to be permanently imprinted on the picture tube (or projection TV picture tubes). ALSO, some network/program loges, phone numbers, black borders (sides, top, bottom) etc. may cause similar damage. This damage is not covered by your warranty. Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. Product Registration Pleasefill out the product registration card (packed separately) and return it immediately. Returning the card allows us to contact you if needed. Product Information Keep your sales receipt to obtain warranty parts and serviceand for proof of purchase.
    [Show full text]
  • D-VHS DIGITAL SATELLITE RECORDER HM-DSR100U HM-DSR100DU (With Antenna Kit) HM-DSR100RU (Without Antenna Kit)
    D-VHS DIGITAL SATELLITE RECORDER HM-DSR100U HM-DSR100DU (with Antenna Kit) HM-DSR100RU (without Antenna Kit) SAT TV D-VHS AUX POWER TV/VCR MODE MUTE MENU MTP ME OLU G V U IDE NTSC ¶ CH T B INFO H R O E SELECT W MENU M S E E SELECT L INFO E D-VHS NC TM CA Ä CH ™INDEXVIEW INDEX£ 123 SKIP AUTO TRACK SKIP 456 POWER REC REW FF REW/BROWSE FF/BROWSE q 2 3 789 ADDRESS RECALL TV/VCR 8 EJECT 0 POWER REC PAUSE TIMER EP PAUSE STOP PLAY COUNTER RESET 6 5 REC VIDEO (MONO)L–AUDIO–R TM For Customer Use: Enter below the Serial No. which is INSTRUCTIONS located on the rear of cabinet. Retain this information for future reference. Model No. Serial No. LPT0002-0H9C Dear Customer, Thank you for purchasing the JVC D-VHS digital satellite recorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR. Failure to heed the following precautions may result in damage to the VCR, remote control or CAUTIONS video cassette. 1. DO NOT place the VCR . CAUTION ... in an environment prone to extreme temperatures or humidity. RISK OF ELECTRIC SHOCK ... in direct sunlight. DO NOT OPEN ... in a dusty environment. ... in an environment where strong magnetic fields are generated. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. ... on a surface that is unstable or subject to vibration. DO NOT REMOVE COVER (OR BACK). 2. DO NOT block the VCR’s ventilation openings.
    [Show full text]