All About Additives PERFORMANCE SPECTRUM of FUEL ADDITIIVES

All about additives PERFORMANCE SPECTRUM OF FUEL ADDITIIVES

FUEL ADDITIVES FOR GASOLINE ENGINES Speed Tec Petrol Carburetor and Valve Cleaner Injection Cleaner Fuel System Treatment Valve Clean Lead Substitute Petrol Stabiliser Cleaning ¸ ¸¸ ¸¸ ¸ ¸¸ Protection against corrosion ¸ ¸ ¸ ¸ ¸¸ Lubricity improver ¸ ¸¸ Protec. against icing-up of carbu. ¸ Lead substitute ¸ Ageing protection ¸ ¸ ¸ ¸¸ Acceleration booster ¸ Long-term protection (2,000 km) ¸ ¸ ¸ Continuous use ¸ ¸ ¸ ¸ Problem-related ¸ ¸

FUEL ADDITIVES FOR DIESEL ENGINES Speed Tec Diesel Super Diesel Add. Bio Diesel Add. Common Rail Additive Diesel Smoke StopDiesel Lubricity Additive Diesel Flow Fit Diesel Purge Anti-Bact. Diesel Add. Cleaning ¸ ¸¸ ¸ ¸ ¸ ¸¸¸ Protection against corrosion ¸ ¸¸ ¸ ¸ ¸ ¸ Ageing protection ¸¸ ¸ Cetane number improver ¸ ¸¸ ¸ Soot oxidation ¸ Lubricity improver ¸ ¸¸ ¸¸ ¸ Acceleration booster ¸ Flow improver ¸¸ Long-term protection (2,000 km) ¸ ¸ ¸ Continuous use ¸ ¸ ¸ ¸ ¸ Problem-related ¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸ ¸¸¸

¸ ¸¸

FOR CLEANER COMBUSTION AND LOWER FUEL CONSUMPTION:

¸ ¸ ¸ ¸ FUEL ADDITIVES The engine combustion process leaves behind fuel residues. Deposits that form and adhere to surfaces in combustion chambers, on injectors, valves and injector tips of Diesel engines.

¸ ¸ ¸ The result: impairment of engine performance, higher fuel con- ¸¸ sumption, Diesel clatter, higher smoke emission, more pollutants. With LIQUI MOLY additives existing deposits are removed and new ones prevented. The combustion is improved. And that

means lower repair costs, lower fuel consumption, greater oper- ¸ ¸ ¸¸ ¸¸ ¸¸ ating reliability, more environmental protection, higher engine performance.

Without With

Valve Clean: Valve Clean: ¸ ¸ ¸ ¸ ¸¸ Deposits Clean valves, on valves, unimpaired lower engine engine performance. performance. ¸ ¸ ¸

Without With Carburetor Carburetor and Valve and Valve Cleaner: Cleaner: Poor com- Excellent pression and compression high fuel and economical consumption. consumption. FOR LOWER WEAR AND LONGER ENGINE LIFE: OIL-ADDITIVES For every kilometer you drive you pay with a tiny piece of the engine, because of friction and wear. This can be seen from accumulated metals abrasion in the oil. With LIQUI MOLY Oil Additiv / MoS2 Anti-Friction and Cera Tec this wear can be reduced. In spite of all efforts to produce smooth metal surfaces they remain, when viewed under a microscope, rough and uneven 1 (Fig. 1). These irregularities are compensated for with the appli- cation of solid lubricants such as molybdenum disulfide (MoS2) or microceramics (Fig. 2). 2 Surface treatment consider ably reduces frictional resistance and wear: chemical agents, or so-called friction modifiers (as found in MotorProtect) chemically bond with the metallic 3 surface and smooth the high points of metal pairing surfaces, thereby eliminating damage (Fig. 3).

Cera Tec combines both of the following acting principles: The microceramic solid lubricant fills 4 the coarseness of the metal, while a chemical reaction protects and smoothes the surface (Fig. 4). Motor oil additives are added directly into the oil filler opening of the engine and clean the system or reduce the friction and the wear.

Oil sludge clogs oil ducts and holes. Over time, this leads to engine damage and to overheating.

LIQUI MOLY Engine Flush is to be added to the motor oil before the oil change and cleans the engine of deposits and residues. Clean oil circuits ensure a greater engine performance and service life.

Combustion deposits in the combustion chamber collect in the piston ring grooves and inhibit the movement and sealing capability of the piston rings.

LIQUI MOLY Engine Flush cleans the piston grooves and guarantees the original compression and engine performance. Clean engines perform better and consume less fuel. FOR GASOLINE FOR CARBURE- ENGINES TOR ENGINES

Carburetor Speed Tec Gasoline and Valve Cleaner Modern gasoline additive for im- Removes deposits in the com- proved, smoother acceleration bustion chamber, carburetor, and throttle response in the par- on intake valves and on spark tial-load range. Increased driving plugs. Keeps the en gine clean. enjoyment due to higher perfor- Regular use assures low smog mance. Simply add to gasoline. test exhaust emissions. With Sufficient for up to 70 liters of long-time effect: add to gasoline gasoline. every 2000 km when filling up. Part no.: 3720 / 250 ml Part no.: 2507 / 300 ml D-GB-I-E-P GB-ARAB-F Part no.: 1818 / 300 ml EFFECT: GB-GR-I Noticeably improves acceleration. EFFECT: ˜ Faster combustion. Combustion ˜ Higher performance. chamber cleaning. ˜ Reduces non-combusted ˜ Higher engine performance. residual fuel. ˜ Lower gasoline consumption. ˜ Corrosion protection. ˜ Lower pollutant emissions.

Injection Cleaner provides exact injection metering and fuel spray pattern for higher engine performance, lower consumption and a cleaner combus tion. FOR FUEL INJEC- FOR GASOLINE TION ENGINES ENGINES

Fuel System Injection Cleaner Treatment Removes carbon and other For preventive care, add to deposits from fuel distributo r/ the fuel every 2000 km. Suffi- throttle body, and from injec- cient for max. 75 liters of fuel. tors and valves. Provides for Highly effective combination of precise injection metering and addi tives protects all compo- fuel spray pattern. Regular nents of the fuel system against use guarantees lowest smog corrosion. Catalyst converter test emission levels. With long- tested. time effect: add to gasoline every 2000 km – when filling up. Part no.: 8365 / 300 ml GB-ARAB-F Part no.: 8361 / 300 ml GB-ARAB-F EFFECT: Part no.: 1803 / 300 ml GB-GR-I Corrosion protection. ˜ Assures optimum drivability EFFECT: and low fuel consumption. ˜ Guarantees low levels of Cleaning of entire pollutants in the exhaust gas. injection system. ˜ Maintains engine ˜ No more starting problems performance. and no more lean surging ˜ Assures optimum mixture and hesitation. preparation. ˜ Smooth idling, good throttle ˜ Enhances operating response. relia bility and economy. ˜ More engine power. ˜ Fuel consumption is reduced. ˜ Environment-friendly combustion. FOR GASOLINE ENGINES

Valve Clean Octane Plus Prevents deposits at valves and For all gasoline-driven motors keeps the engine clean. Provides for the improvement of the ideal fuel utilization and clean performance. Reduces knock- burning. Regular usage gives ing combustion from gasoline low smog test exhaust levels. with low octane numbers. First Use at every filling. Sufficient add OCTANE PLUS and then top for one tankfull. up, which provides optimal in- dependent mixing. 150 ml suffi- Part no.: 8373 / 150 ml cient for 50 l gasoline. GB-ARAB-F Part no.: 2952 / 150 ml Part no.: 8351 / 150 ml GB-GR-I GB-ARAB-F Part no.: 2956 / 150 ml EFFECT: GB-GR-I Valve cleaning. EFFECT: ˜ More engine performance. ˜ Lower gasoline consumption. Performance increase ˜ Lower pollutant emissions. for gasoline. ˜ Corrosion protection. ˜ Increases the RON by ˜ No pinging, knocking up to 4 points. or hesitation. ˜ No harmful effects on catalytic converters. FOR GASOLINE ENGINES

Fuel Protect Lead Substitute Protects gasoline fuel system For all gasoline engines that against water and waterborne pre viously needed leaded gas- contamination. Protects against oline. To be added when filling rust, corrosion and wear. Pre- up. Avoid undertreating and vents icing in fuel lines, filters overtreating. 25 ml is sufficient and carburetors. for 25 l of gasoline. Part no.: 2530 / 300 ml Part no.: 1010 / 250 ml GB-ARAB-F D-F-NL Part no.: 2955 / 300 ml Part no.: 1838 / 250 ml GB-GR-I GB-GR-I (for up to 60 l fuel) EFFECT: EFFECT: For running with Protection against unleaded fuel. water, ice and rust. ˜ Lubricates and protects ˜ Keeps fuel system unhardened valve seats in good working order. against wear and “recession”. ˜ Works against plugging ˜ Prevents engine damage. of fuel lines and filters. ˜ Maintains excellent ˜ Improves cold-start compression. performance.

without Lead Substitute with Lead Substitute FOR GASOLINE ENGINES

Petrol Stabiliser DFI Cleaner Modern, ash-free combination Modern fuel additive with polyeth- of additives with conserving and eramine technology. Suitable for material-protecting properties. all passenger cars with 4-stroke Formulated according to the lat- gasoline engines. 120 ml can for- est fuel and additive technology. mulated for 30 – 50 l of fuel. For For addition to the fuel for all 4 the ideal effect, add to the fuel and 2-stroke gasoline engines. every 5,000 km at the earliest. For protecting the engines of Mixing takes place automatically. motorcycles, classic cars and LIQUI MOLY also recommends engine-powered garden equip- this product for vehicles or as- ment, especially when out of semblies for which the following use for lengthy periods. 25 ml specifications or original part of gasoline stabilizer treats 5 numbers are required: Opel liters of fuel. Add to the tank 95527846/95527847/95599923 and run the engine for approx. OEM recommendations may differ 10 minutes. from the standard dosage. Note manufacturer’s instructions! Part no.: 5107 / 250 ml D-F-NL Part no.: 21377 / 120 ml D-GB EFFECT: Part no.: 21375 / 120 ml F-NL Deterioration Part no.: 21362 / 120 ml protection. I-GR ˜ Protects fuel against oxidation and ageing. EFFECT: ˜ Long-term action. ˜ Enhanced operating Reduces the risk of engine reliability. damage due to LSPI. ˜ Cleans the combustion chamber and injectors ˜ Cleans the fuel system FOR GASOLINE FOR DIESEL ENGINES ENGINES

Hybrid Additive Speed Tec Diesel Suitable for hybrid vehicles and Ash-free diesel fuel additive gasoline engines. Suitable for for a noticeable increase in en gines with intake-manifold performance. State-of-the-art in jection and direct injection. diesel additive for noticeably Cleans injection system and improved acceleration and combustion chamber. Protects smoother engine running. Cleans against corrosion and stabilizes injection systems and combus- fuel over extended service time. tion chambers. Reduces pollu- Reduces pollutant emissions and tant emissions. Suitable for use CO2 emissions. Add contents to with diesel particulate filters and fuel during refueling. Contents bio-diesel fuel. Sufficient for up of the can sufficient for up to to 70 liters of diesel fuel. 75 liters of fuel. Part no.: 3722 / 250 ml Part no.: 1001 / 250 ml D-GB-I-E D-GB-I-E-P EFFECT: EFFECT: Noticeably improves Fuel additive developed acceleration. specifically for hybrid ˜ Faster combustion. engines. ˜ Higher performance. ˜ Prevents the build-up ˜ Reduces non-combusted of deposits. residual fuel. ˜ Optimum stability to aging. ˜ Good corrosion protection. ˜ Fuel economy. FOR DIESEL ENGINES

Super Diesel Additive Bio Diesel Additive Increases fuel ignition perfor- Cleans and prevents deposits mance (cetane number), thereby and protects the entire fuel increasing the vehicle’s running system from corrosion. Guaran- smoothness and performance tees the aging resistance of the level. Formulated for low-sul- biodiesel. Best suited for diesel fur Diesel fuel. Provides clean- oxidation catalytic convertors. liness and prevents deposits in The product has a lasting effect: the fuel system. Regular use Add every 2000 km when re- maintains specified smog test fueling. exhaust emissions. With long- time effect: add to Diesel fuel Part no.: 3725 / 250 ml every 2000 km when filling up. D-GB-I-E-P

Part no.: 8366 / 250 ml EFFECT: GB-ARAB-F Part no.: 1806 / 250 ml Cetane number GB-GR-I improvement and quieter running. EFFECT: ˜ Higher engine performance. ˜ Protects against corrosion. Injection system ˜ Protects biodiesel fuel cleaning. against aging. ˜ Higher engine performance. ˜ Less clatter and “nailing”. ˜ Quieter operation. ˜ Easier, faster starting. ˜ Better utilization of fuel and economical combustion. FOR DIESEL ENGINES

Common Rail Additive Diesel Smoke Stop The lubricating properties of Accelerates the oxidation / re- diesel fuel decrease, the lower duction of soot. Also prevents the sulfur content. Deposits also injector tips from carbonizing form in the injection system, and corroding. Regular use considerably reducing the ser- gives low exhaust emissions vice life of sensitive components. as specified for smog testing. Common Rail Additive protects Sufficient for 50 l of Diesel fuel. common rail diesel and pumped jet diesel engines from the for- Part no.: 8363 / 150 ml mation of deposits, wear and GB-ARAB-F cor rosion. Part no.: 1808 / 150 ml GB-GR-I Part no.: 8372 / 250 ml GB-ARAB-F EFFECT: Part no.: 8953 / 250 ml GB-GR-I Lowers soot emissions. ˜ Reduces Diesel soot EFFECT: emissions. ˜ Reduces unpleasant Wear protection and cleaner exhaust odor. for common rail technology. ˜ Keeps engine and ˜ Protects against corrosion injectors clean. and wear. ˜ Lowers environmental ˜ Prevents deposits. impact. ˜ Optimizes fuel consumption. ˜ Maintains the engine’s output. FOR DIESEL ENGINES

Diesel Lubricity Diesel Particulate Additive Filter Protection The high pressure pump of the Reduces soot formation. This Common rail system and the extends the service life of the distributor injection pumps are diesel particulate filter (DPF). lubricated by the diesel fuel. Regular use keeps the DPF clean, Since the introduction of low- avoiding expensive repairs and sulfur diesel, lubrication prob- down times. Add every 2000 km lems occur frequently and thus when refueling. Sufficient for up also specific faults. To be added to 50 – 70 liters of diesel fuel. at every tank filling. 150 ml is Not suit able for diesel-powered sufficient for 80 l of diesel fuel. vehicles with DPF, which have an electronically controlled ad- Part no.: 5122 / 150 ml di tive tank system for filter D-F-NL regeneration, e. g. Citroën and Peugeot. Note: Do not add an EFFECT: excessive amount and do not Protection against use in combination with Diesel sudden breakdown. Smoke Stop! ˜ Protects rotary distributor Part no.: 7180 / 250 ml injection pumps against wear GB-GR-I and breakdown. ˜ Reduces wear in all other EFFECT: parts of the injection system. Protects the diesel particulate filter. ˜ Regeneration aid for DPF systems. ˜ Especially suitable for short trips and city vehicles. FOR DIESEL ENGINES

Diesel Flow Fit Diesel Purge Winterized diesel fuels are only Removes deposits on injectors able to safely operate at tem- and in the piston / combustion peratures down to – 20 °C in chamber area. No more “nailing” accordance with EN 590. Pre- at partial load – more regular vents the gelling of diesel fuels idling, smooth engine running. and heating oil. 150 ml are suf- High operating reliability, re- ficient for 40 – 75 l of diesel fuel. duced susceptibility to repairs. It is only effective when added For maximum cleaning effect, before the diesel has gelled use Diesel Purge at full strength (at 0 °C). Note: Frost sensitive, (do not dilute). therefore store above 0 °C! Part no.: 8380 / 500 ml Part no.: 8929 / 150 ml GB-ARAB-F GB-GR-I Part no.: 1811 / 500 ml Part no.: 5131 / 1 l GB-GR-I D-GB-NL-E-F-I-P Part no.: 2520 / 1 l (for 1,000 l of fuel) D-GB-I-E-P

EFFECT: EFFECT: Against jelling of fuel. Removes deposits. ˜ Keeps fuel fluid down ˜ Boosts the cetane number. to – 31 °C. ˜ Protects against corrosion. ˜ Improves the flow and ˜ More regular idling. filterability of Diesel fuel. ˜ Smoother engine running. FOR DIESEL FOR MOTOR OILS ENGINES

Anti-Bacterial Diesel-Additive Cera Tec Suitable for all diesel engines. High-tech ceramic engine wear The introduction of water when protection for all motor oils. refueling or condensation can Cera Tec is added to the motor lead to the formation of bacteria, oil to reduce friction and wear. yeast and mold in the fuel sys- Chemically and thermally highly tem, which destroy the compo- stable micro-ceramic particles nents and clog the line system have a low-friction effect and and the fuel filter. Anti-Bac- reduce fuel consumption. Suffi- terial Diesel-Additive prevents cient for up to 5 liters of engine bacterial contamination and oil. pro tects injection system components from corrosion. Also Part no.: 3721 / 300 ml suitable for storage tanks. Add before refueling. Dosage 1 : 1000. EFFECT: One 25 ml measuring cup will treat 25 liters of diesel fuel. High-tech-ceramic Use biocides safely. Always engine wear protection. read the label and product ˜ Reduces wear. information before use. ˜ Reduces fuel consumption. Increases engine service life. Part no.: 21317 / 1000 ml ˜ Suitable for gasoline and D-GB-F-E-I-GR ˜ diesel engines. EFFECT: ˜ Can also be used in pumps Counteracts bacterial and compressors. contamination. ˜ Prevents bacterial contamination. ˜ Disinfects contaminated tank systems. ˜ Highly effective, with broad active spectrum. FOR MOTOR OILS

Oil Additive Oil Sludge Flush

MoS2 solid lubricant builds a Removes oil sludge from en- high-performance film that con- gine. Keeps oil screens and oil siderably reduces friction and ways free. Use before the oil wear. Boosts running smooth- change. 300 ml is sufficient for ness and reliability. Add 5 % Oil max. 5 l of engine oil. Mix with Additive to the motor oil at each the engine oil 100 – 300 km be- oil change. fore changing the motor oil. Part no.: 8364 / 300 ml Part no.: 5200 / 300 ml GB-ARAB-F D-F-NL Part no.: 2591 / 300 ml GB-GR-I EFFECT: Protection against EFFECT: engine sludge. Protection against wear. ˜ Improved engine ˜ Engine sustains significantly cleanliness. less wear. ˜ Prevents oil starvation. ˜ Reduced oil and fuel ˜ Protects against engine consumption. damage. ˜ Extended engine life, ˜ Reduces piston ring with emergency-running deposits. properties. ˜ Smoother engine running. FOR MOTOR OILS

Engine Flush Plus Motor Oil Saver Quick-working additives accel- Rejuvenates dried-out seals and erate the dissolving of sludge reduces oil consumption. Com- and lacquer formers, as well pensates for viscosity loss and as oil-insoluble residues in the dampens engine noise. Add at engine oil circuit within an op- every oil change. 300 ml is suf- erating time of 5 to 10 minutes. ficient for up to 5 l of engine oil. 300 ml sufficient for up to 6 l of Sealing first takes effect after motor oil. about 600 to 800 km of driving. Part no.: 8374 / 300 ml Part no.: 8359 / 300 ml GB-ARAB-F GB-ARAB-F Part no.: 1802 / 300 ml EFFECT: GB-GR-I Accelerated engine cleaner. EFFECT: ˜ Gentle and fast cleaning of the engine’s interior. Prevents loss of oil. ˜ Improves compression. ˜ No more soil-polluting ˜ Improves the engine oil spots. performance. ˜ Reduces oil consumption. ˜ Does not attack sealing ˜ Prevents blue exhaust materials. smoke (oil burning). FOR MOTOR OILS

Hydraulic Lifter Viscoplus for Oil Additive Prevents oil thinning. Thanks Damps hydraulic tappet noise. to better sealing of the moving For gasoline and Diesel engines. parts the oil consumption is re- Tested safe for turbochargers duced. Use in case of excessive and catalytic converters. Add to oil consumption and between the engine oil. Compatible with the oil changes. 300 ml is suffi- all mineral and synthetic engine cient for max. 5 l engine oil. oils. 300 ml sufficient for 6 l engine oil. Part no.: 8362 / 300 ml GB-ARAB-F Part no.: 8367 / 300 ml Part no.: 8958 / 300 ml GB-ARAB-F GB-GR-I Part no.: 2770 / 300 ml GB-GR-I EFFECT: Reduces oil consumption. EFFECT: ˜ Keeps the oil viscosity Damps hydraulic stable. tappet noise. ˜ For constant oil pressure. ˜ For optimum functioning ˜ Protection against of hydraulic lifters. mechanical oil breakdown. ˜ Cleans valves and bores. ˜ Reduces engine noises of worn engines. FOR MOTOR OILS

Oil Smoke Stop Molygen Motor Protect For use in gasoline and diesel en- Chemical friction modifier on gines with blue exhaust smoke, tungsten base reduces friction increased oil consumption, low permanently by grading the sur- oil pressure or poor compres- face structure of all motor parts. sion. Add during or between oil Molygen Motor Protect can be changes. 300 ml sufficient for used with standard motor oils. 4 to 6 l of motor oil. 500 ml is sufficient for up to 5 l of motor oil. Not suitable for use on Part no.: 8360 / 300 ml motorbikes with wet clutches! GB-ARAB-F Color: fluorescent green Part no.: 8901 / 300 ml GB-GR-I Part no.: 1015 / 500 ml D-GB-NL-F-E-I EFFECT: Reduces oil consumption. EFFECT: ˜ Keeps the oil viscosity Long-time wear protection stable. ˜ Reduces fuel consumption. ˜ For constant oil pressure. ˜ Friction and wear reducing. ˜ Protection against ˜ Stable under extreme mechanical oil breakdown. pressures. ˜ Reduces engine noises ˜ Increases smooth operation. of worn engines. ˜ High thermal stability. FOR MOTOR OILS

Motor Clean Motor Protect The highly effective detergents The synthetic high pressure anti- and dispersants loosen the wear additive forms a very thin, sludge and lacquers, and keep moldable and friction-reducing both solid and liquid contami- layer on friction components in nants in suspension until they the engine. It remains effective are drained with the old motor up to 50,000 km. 500 ml is suf- oil. 500 ml is sufficient for 5 l ficient for max. 5 l of engine oil. engine oil. Part no.: 1018 / 500 ml Part no.: 1019 / 500 ml D-GB-NL-F-E-I D-GB-NL-F-E-I

EFFECT: Long-time wear protection. Engine flushing. ˜ Gives significant wear reduc- ˜ Flushes and cleans tion and longer engine life. the engine interior. ˜ For perfect engine perfor- ˜ The engine develops its mance, quieter operation. full performance again. ˜ Reduction of fuel ˜ Engine wear is reduced. consumption and ˜ Exhaust emissions pollutant emissions. are lowered. FOR GEAR OILS

Gear Protect ATF Additive Smooths out gear-tooth flanks Suitable for all steering gears and raises performance. The and automatic transmissions gearbox runs quieter and that are filled with ATF II and smoother and can be shifted ATF III oils. Regenerates and pro- more easily. Reduces friction tects plastic and rubber seals. and wear. For manual, auxiliary Cleans and improves the per- and differential gears. 80 ml is formance of ATF II / III oils in sufficient for 2 l gear oil. automatic transmissions. 250 ml sufficient for up to 8 l of oil. (Not Part no.: 1007 / 80 ml suitable for DCT transmissions.) D-GB-NL-F-E-I Part no.: 5135 / 250 ml EFFECT: D-GB-I-E-P Part no.: 8336 / 250 ml Protects the transmission. GB-ARAB-F ˜ High pressure anti-wear additive of newest technology. EFFECT: ˜ Reduces friction and wear. ˜ Long-time action. Stops oil loss. ˜ Preventative effect. ˜ Regenerates seals. ˜ Protects from wear. ˜ Improves the shifting operations. ˜ Optimizes the steering characteristics and reduces noise levels. FOR GEAR OILS

Automatic Trans- Transmission Cleaner mission Cleaner Highly effective transmission For gentle and fast automatic cleaner with special additive transmission cleaning. Compa- package. Removes all contam- tible with all sealing materials inants in the transmission to and automatic transmission com- drain off the dissolved depos- ponents. Improves the shifting its during the subsequent oil performance and lengthens the change. For cleaning manual, service life of automatic trans- auxiliary and differential transmissions. 300 ml sufficient for missions. Contents sufficient to 6 to 9 l of oil. treat up to 4 l of oil. Part no.: 2512 / 300 ml Part. no.: 3321 / 150 ml D-GB-I-E-P D-GB-I-E-P EFFECT: EFFECT: Transmission cleaning. Removes undesirable ˜ Fast and gentle cleaning. deposits. ˜ Removes undesirable ˜ Provides for optimal deposits. shifting performance. ˜ Provides for optimal ˜ The cleaner is neutral shifting performance. to metals, plastics and rubber seals. FOR GEAR OILS

MoS2 Anti-Friction for Gears Gear-Oil Leak Stop Even older transmissions re- Regenerates hardened trans- gain most of their original quiet- mission seals and reduces oil ness and capacity thanks to the consumption. No more soil plating out of the tooth flanks. polluting oil spots. Protects Add to gear oil in transmission, the clutch against oil conta- transaxle, rear axle. mination, prevents defects in lubrication. For all manual gear- Part no.: 2510 / 50 g boxes, auxiliary gears, and dif- GB-I-E ferentials. 50 ml is sufficient for 1 l gear oil. Sealing first takes EFFECT: effect after about 600 to 800 km Wear protection. of driving. ˜ Quieter operation. Part no.: 1042 / 50 ml ˜ Smoother shifting. D ˜ Longer service life of transmission. EFFECT: ˜ Emergency lubrication properties thanks to MoS2. Protection against oil leaks. ˜ Stops oil loss with leaky gearboxes. ˜ Rejuvenates seals and gaskets. FOR GEAR OILS FOR THE RADIATOR

Power Stearing Oil Leak Stop Radiator Cleaner Leaks at power steering sys- For all cooling and heating tems caused by hardened or systems. Use according to in- brittle rubber and plastic seals structions on container. 300 ml are prevented or eliminated. is sufficient for 10 l of coolant. Power Steering Oil Stop Leak is mixed into the compensating Part no.: 8369 / 300 ml reservoir of the steering system. GB-ARAB-F 35 ml is sufficient for 1 liter of oil. Part no.: 1804 / 300 ml Suitable for all steering gears GB-GR-I that are filled with ATF II, ATF III, ATF VI and central hydraulic oils. EFFECT: 35 ml is sufficient for 1 liter of oil. For perfect engine cooling Part no.:1099 / 35 ml and operating safety. D-GB ˜ Cleans the cooling and heating systems. EFFECT: Stops the loss of power steering fluid. ˜ Minimizes unwanted noise. ˜ Prevents rapid aging of oil. ˜ Increases service life.

ENVIRONMENTAL PROTECTION IS GIVEN HIGHEST PRIORITY LIQUI MOLY additives reduce pollutants and save fuel and oil ... recyclable containers ... used oil disposal systems ... our oil containers save packaging disposal ... which all adds up to: Active environmental protection is one of the priorities at LIQUI MOLY and will continue to be so in the future. FOR THE RADIATOR

Radiator Stop Leak Radiator Stop Leak Plus For all cooling water and heat- Provides a permanent seal for ing systems with and without leaks and hairline cracks in the water filters. Also suitable for cooling system. Radiator Stop aluminum and plastic radia- Leak also can be used as a pre- tors. The content is sufficient ventative measure in order to for 10 litres of coolant. Compa- safeguard the cooling system tible with all standard treating when carrying out all types of agents for coolants and anti- repair work. Can be mixed with freeze. Can also be used as a all coolant additives and anti- preventative measure. Add con- freezes. Sufficient for 10 liters tents to the cold cooling system. of coolant. Part no.: 8371 / 150 ml Part no.: 2533 / 250 ml GB-ARAB-F D-GB-I-E-P Part no.: 8956 / 150 ml GB-GR-I EFFECT: Part no.: 8370 / 250 ml GB-ARAB-F Seals the smallest Part no.: 1810 / 250 ml of leakages. GB-GR-I ˜ Suitable for coolant circuits with water filter. EFFECT: ˜ Suitable for aluminum radiators. Protection against loss of water. ˜ Safeguards the combustion chambers against entry of radiator coolant. ˜ Seals dangerous hair-cracks. ˜ Restores proper engine cooling and functioning of the heating system. MOTOR OILS & ADDITIVES MADE IN GERMANY

With optimum performance throughout the year

Over 4,000 articles – all from one source. Subject to technical modifications. No liabilityfor misprints. E-Mail: support liqui-moly.com +497311420-871 Phone: Technical support: www.liqui-moly.com +497311420-75 E-Mail: info liqui-moly.com Fax: +497311420-0 Phone: GERMANY 89081 Ulm Jerg-Wieland-Straße 4 LIQUI MOLY GmbH With compliments: Free ofcharge! LIQUI The MOLY app liqui-moly.to/PlayStore liqui-moly.to/AppStore teamshop.liqui-moly.com Visit ourFanshop

56162101