DOCSLIB.ORG

MODFLOW 6 – Description of Input and Output

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
MODFLOW 6 – Description of Input and Output Prepared in cooperation with the U.S. Geological Survey Water Availability and Use Science Program MODFLOW 6 – Description of Input and Output Version mf6.0.0—August 11, 2017 U.S. Department of the Interior U.S. Geological Survey Cover. Binary computer code illustration. Contents Introduction.......................................................................................1 Running a Simulation...............................................................................1 Form of Input Instructions...........................................................................2 Block and Keyword Input.......................................................................2 Specification of Block Information in OPEN/CLOSE File............................................3 File Name Input...............................................................................4 Lengths of Character Variables.................................................................4 Simulation Name File...............................................................................5 Structure of Blocks............................................................................5 Explanation of Variables........................................................................5 Example Input File.............................................................................7 Temporal Discretization (TDIS) Package..............................................................8 Structure of Blocks............................................................................8 Explanation of Variables........................................................................8 Example Input File.............................................................................9 Groundwater Flow (GWF) Model Input............................................................... 10 Information for Existing MODFLOW Users........................................................ 10 Array Input (READARRAY)...................................................................... 15 READARRAY Control Line.................................................................. 15 READARRAY Variable Descriptions.......................................................... 16 READARRAY Examples..................................................................... 17 List Input..................................................................................... 18 Units of Length and Time....................................................................... 19 Steady-State Simulations...................................................................... 20 Volumetric Budget............................................................................. 20 Cell-By-Cell Flows............................................................................. 21 GWF Model Name File......................................................................... 23 Structure of Blocks........................................................................ 23 Explanation of Variables................................................................... 23 Example Input File......................................................................... 24 Structured Discretization (DIS) Input File........................................................ 26 Structure of Blocks........................................................................ 26 Explanation of Variables................................................................... 26 Example Input File......................................................................... 27 Discretization with Vertices (DISV) Input File..................................................... 28 Structure of Blocks........................................................................ 28 Explanation of Variables................................................................... 29 Example Input File......................................................................... 30 i Unstructured Discretization (DISU) Input File..................................................... 32 Structure of Blocks........................................................................ 32 Explanation of Variables................................................................... 33 Example Input File......................................................................... 35 Initial Conditions (IC) Package.................................................................. 36 Structure of Blocks........................................................................ 36 Explanation of Variables................................................................... 36 Example Input File......................................................................... 36 Output Control (OC) Option..................................................................... 37 Structure of Blocks........................................................................ 37 Explanation of Variables................................................................... 37 Example Input File......................................................................... 38 Observation (OBS) Utility for a GWF Model....................................................... 39 Example Observation Input File............................................................. 39 Node Property Flow (NPF) Package............................................................. 40 Structure of Blocks........................................................................ 40 Explanation of Variables................................................................... 40 Example Input File......................................................................... 42 Horizontal Flow Barrier (HFB) Package.......................................................... 43 Structure of Blocks........................................................................ 43 Explanation of Variables................................................................... 43 Example Input File......................................................................... 44 Storage (STO) Package........................................................................ 45 Structure of Blocks........................................................................ 45 Explanation of Variables................................................................... 45 Example Input File......................................................................... 46 Constant-Head (CHD) Package................................................................. 47 Structure of Blocks........................................................................ 47 Explanation of Variables................................................................... 47 Example Input File......................................................................... 49 Available observation types................................................................ 49 Example Observation Input File............................................................. 49 Well (WEL) Package........................................................................... 51 Structure of Blocks........................................................................ 51 Explanation of Variables................................................................... 51 Example Input File......................................................................... 53 Available observation types................................................................ 54 Example Observation Input File............................................................. 54 Drain (DRN) Package.......................................................................... 55 Structure of Blocks........................................................................ 55 Explanation of Variables................................................................... 55 Example Input File......................................................................... 57 Available observation types................................................................ 57 ii Example Observation Input File............................................................. 57 River (RIV) Package........................................................................... 59 Structure of Blocks........................................................................ 59 Explanation of Variables................................................................... 59 Example Input File......................................................................... 61 Available observation types................................................................ 61 Example Observation Input File............................................................. 62 General-Head Boundary (GHB) Package......................................................... 63 Structure of Blocks........................................................................ 63 Explanation of Variables................................................................... 63 Example Input File......................................................................... 65 Available observation types................................................................ 65 Example Observation Input File............................................................. 66 Recharge (RCH) Package – List-Based Input..................................................... 67 Structure of Blocks........................................................................ 67 Explanation of Variables..................................................................
Load more

Recommended publications
  • Fully Conservative Coupling of HEC-RAS with MODFLOW to Simulate Stream–Aquifer Interactions in a Drainage Basin
    Journal of Hydrology (2008) 353, 129– 142 available at www.sciencedirect.com journal homepage: www.elsevier.com/locate/jhydrol Fully conservative coupling of HEC-RAS with MODFLOW to simulate stream–aquifer interactions in a drainage basin Leticia B. Rodriguez a,*, Pablo A. Cello b,1, Carlos A. Vionnet a,2, David Goodrich c a Department of Hydrology and Water Resources, University of Arizona, Tucson, AZ USA b Facultad de Ingenierı`a y Ciencias Hı`dricas, Universidad Nacional del Litoral, CC 217, 3000 Santa Fe, Argentina c Southwest Watershed Research, Agricultural Research Service, U.S. Department of Agriculture, 2000 East Allen Road, Tucson, AZ 85719, USA Received 20 September 2007; received in revised form 10 January 2008; accepted 6 February 2008 KEYWORDS Summary This work describes the application of a methodology designed to improve the Groundwater–surface representation of water surface profiles along open drain channels within the framework water interaction; of regional groundwater modelling. The proposed methodology employs an iterative pro- Hydrologic modelling; cedure that combines two public domain computational codes, MODFLOW and HEC-RAS. In MODFLOW; spite of its known versatility, MODFLOW contains several limitations to reproduce eleva- HEC-RAS tion profiles of the free surface along open drain channels. The Drain Module available within MODFLOW simulates groundwater flow to open drain channels as a linear function of the difference between the hydraulic head in the aquifer and the hydraulic head in the drain, where it considers a static representation of water surface profiles along drains. The proposed methodology developed herein uses HEC-RAS, a one-dimensional (1D) com- puter code for open surface water calculations, to iteratively estimate hydraulic profiles along drain channels in order to improve the aquifer/drain interaction process.
    [Show full text]
  • Streamflow-Routing (SFR2) Package with Unsaturated Flow Beneath Streams (MODFLOW 2005 Version 1.12.00)
    Streamflow-Routing (SFR2) Package with Unsaturated Flow beneath Streams (MODFLOW 2005 Version 1.12.00) MODFLOW Name File The Streamflow-Routing Package is activated automatically by including a record in the MODFLOW-2005 name file using the file type (Ftype) “SFR” to indicate that relevant calculations are to be made in the model and to specify the related input data file. The user can optionally specify that stream gages and monitoring stations are to be represented at one or more locations along a stream channel by including a record in the MODFLOW-2005 name file using the file type (Ftype) “GAGE” that specifies the relevant input data file giving locations of gages. Data input for SFR1 works without modification if unsaturated flow is not simulated. Input Data Instructions The modification of SFR2 to simulate unsaturated flow relies on the specific yield values as specified in the Layer Property Flow (LPF) Package, the Hydrogeologic-Unit Flow (HUF) Package, or the Block-Centered Flow (BCF) Package. If MODFLOW-2005 is run with the option to use vertical hydraulic conductivity in the LPF Package, the layer(s) that contain cells where unsaturated flow will be simulated must be specified as convertible. That is, the variable LAYTYP specified in LPF (or variable LTHUF in HUF) must not be equal to zero, otherwise the model will print an error message and stop execution. Additional variables that must be specified to define hydraulic properties of the unsaturated zone are all included within the SFR2 input file. All values are entered in as free format. Parameters can be used to define streambed hydraulic conductivity only when data input follows the SFR1 input structure (Prudic and others, 2004).
    [Show full text]
  • Review of the Monolith Materials Inc. Groundwater Flow Model
    Review of the Monolith Materials Inc. Groundwater Flow Model Prepared for: Lower Platte South Natural Resource District February 2021 The technical material in this report was prepared by or under the supervision and direction of the undersigned: ___________________________________________________ Jacob Bauer, P.G. (WY #3902) Hydrogeologist | Project Manager LRE Water Clinton Meyer – Staff Hydrogeologist, LRE Water Dave Hume P.G. (NE # 0186) – Sr. Project Manager and VP Midwest Operations, LRE Water Page | 2 Monolith Model Review- February 2021 TABLE OF CONTENTS Section 1: Introduction ................................................................................................................. 4 1.1 Purpose of Review ............................................................................................................... 4 1.2 Model Background ............................................................................................................... 5 Section 2: Model Objective and Choice of Modeling Code .................................................................... 5 Section 3: Model Inputs ................................................................................................................ 6 3.1 Extent, Spatial Discretization, and Temporal Discretization ............................................................ 6 3.2 Geology, Model Thickness, and Bedrock Flow Interactions ............................................................ 6 3.3 Wells and Targets ...............................................................................................................
    [Show full text]
  • Application of MODFLOW with Boundary Conditions Analyses Based on Limited Available Observations: a Case Study of Birjand Plain in East Iran
    water Article Application of MODFLOW with Boundary Conditions Analyses Based on Limited Available Observations: A Case Study of Birjand Plain in East Iran Reza Aghlmand 1 and Ali Abbasi 1,2,* 1 Department of Civil Engineering, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad 9177948974, Iran; [email protected] 2 Faculty of Civil Engineering and Geosciences, Water Resources Section, Delft University of Technology, Stevinweg 1, 2628 CN Delft, The Netherlands * Correspondence: [email protected] or [email protected]; Tel.: +31-15-2781029 Received: 18 July 2019; Accepted: 9 September 2019; Published: 12 September 2019 Abstract: Increasing water demands, especially in arid and semi-arid regions, continuously exacerbate groundwater resources as the only reliable water resources in these regions. Groundwater numerical modeling can be considered as an effective tool for sustainable management of limited available groundwater. This study aims to model the Birjand aquifer using GMS: MODFLOW groundwater flow modeling software to monitor the groundwater status in the Birjand region. Due to the lack of the reliable required data to run the model, the obtained data from the Regional Water Company of South Khorasan (RWCSK) are controlled using some published reports. To get practical results, the aquifer boundary conditions are improved in the established conceptual method by applying real/field conditions. To calibrate the model parameters, including the hydraulic conductivity, a semi-transient approach is applied by using the observed data of seven years. For model performance evaluation, mean error (ME), mean absolute error (MAE), and root mean square error (RMSE) are calculated. The results of the model are in good agreement with the observed data and therefore, the model can be used for studying the water level changes in the aquifer.
    [Show full text]
  • Using Multiple Conceptual Models to Understand Transboundary
    Using Multiple Conceptual Models to Understand Transboundary Groundwater Flows in Red Cliff Reservation, WI By Yang Li A Thesis submitted in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE (Geological Engineering) at the UNIVERSITY OF WISCONSIN-MADISON 2015 Abstract Interactions between surface water and groundwater play a crucial role in water resources management. Understanding recharge dynamics in the vicinity of surface water bodies has important implications for stream ecology. A comprehensive approach is required to quantify recharge, defined as the entry of water into the saturated zone. The objective of this study is to investigate the transboundbary water impacts on groundwater-fed streams in Red Cliff reservation in northern Wisconsin under different recharge scenarios. A modified Thornthwaite-Mather Soil-Water-Balance code (USGS, 2010) which takes spatially variable factors including climate, land cover and topography into consideration to estimate the spatially- variable recharge rate, is used in this study. The main objective of this study is to understand the probable extent of groundwater recharge areas that contribute to the streams of the Red Cliff Reservation. Stream baseflows and the water configuration can be estimated using the groundwater flow model developed using MODFLOW (Harbaugh, 2005; Harbaugh et al., 2000). Three groundwater models, forced by three conceptual models representing different assumptions about estimated recharge and aquifer hydrological properties, are calibrated through PEST (Doherty, 2010a, b) to obtain a plausible model with the best match between simulated observations (heads and stream flows) and corresponding field observations. Capture zones are then delineated by using backward transport of particles through numerical flow modeling with MODPATH (Pollock, 1994).
    [Show full text]
  • Appendix B Groundwater Flow Model Development
    Appendix B Groundwater Flow Model Development B.1 Introduction B.1.1 Background Hydrogeologic investigations have been conducted at the Dundalk Marine Terminal (DMT) starting with the work performed by EA Engineering Science and Technology, Inc. in 1987 (EA, 1987). The initial investigation included development of a groundwater flow model, which was used to assist in estimating the volumes of groundwater flow in the shallow fill aquifer toward the Patapsco River and the onsite storm drains. In a subsequent feasibility study (EA, 1992), the initial model was somewhat expanded and refined for use in simulating the potential effects of proposed remedial actions. In 2005, CH2M HILL, Inc. started a series of groundwater investigations conducted in three phases that have substantially increased the level of detail in the hydrogeologic understanding of the site. Because of the hydrogeologic complexity of the site, a new groundwater flow model was developed to incorporate the new information obtained in these more recent investigations. This appendix documents the model that has been developed in support of the Chromium Transport Study. B.1.2 Purpose and Objectives Specific objectives of the groundwater flow model are the following: • To provide a computational framework that combines the diverse forms of hydrogeologic information collected at the DMT into a predictive tool governed by the equations of groundwater flow, • To support estimates of the current potential for offsite migration of chromium dissolved in groundwater, both through groundwater discharge to the storm drains or through direct interactions between the aquifers and the Patapsco River, as required in the Chromium Transport Study, • To provide a quantitative mechanism for future predictive simulations of potential remedial actions that could be taken to mitigate dissolved chromium migration.
    [Show full text]
  • Groundwater Flow Modeling with MODFLOW and Related Programsi
    Technology Fact Sheet Water resources model - Groundwater flow modeling with MODFLOW and related programsi 1) Introduction Computer model that can simulate groundwater flow in the aquifer system continues growing significantly, not only in the two-dimensional but three dimensional scale. The computer model can now be run using a personal computer, so the user model is easier to operate for research. One of the most popular computer models used by researchers is the MODFLOW ground water problems. Groundwater Flow Model module of finite-difference (MODFLOW) was developed by the U.S. Geological Survey (USGS). MODFLOW is a computer program to simulate the general features of the groundwater system (McDonald and Harbaugh, 1988; Harbaugh and McDonald, 1996). MODFLOW program is built in the early 1980s, the current model continues to evolve which is equipped with a new package and program development related to ground water used in the study. MODFLOW program popularity as a computer program that can be used to simulate ground water is the most widely used program in the world for the simulation of groundwater flow. 2) Technical requirement MODFLOW is designed to simulate aquifer systems in which (1) saturated-flow conditions exist, (2) Darcy's Law applies, (3) the density of ground water is constant, and (4) the principal directions of horizontal hydraulic conductivity or transmissivity do not vary within the system. These conditions are met for many aquifer systems for which there is an interest in analysis of ground-water flow and contaminant movement. For these systems, MODFLOW can simulate a wide variety of hydrologic features and processes.
    [Show full text]
  • Hargis + Associates, Inc. Hydrogeology  Engineering
    HARGIS + ASSOCIATES, INC. HYDROGEOLOGY ENGINEERING La Jolla Gateway 9171 Towne Centre Drive, Suite 375 San Diego, California 92122 Phone: 858.455.6500 Fax: 858.455.6533 October 2, 2017 VIA E-MAIL Mr. David P. Bolin, CHG Principal Hydrogeologist ORANGE COUNTY WATER DISTRICT 18700 Ward Street Fountain Valley, CA 92708 Re: Groundwater Modeling Scope of Work and Cost Estimate, South Basin Groundwater Protection Project Dear Mr. Bolin: Hargis + Associates, Inc. (H+A) is providing this letter and associated attachments in response to your request for a scope of work and cost estimate to conduct groundwater modeling for the South Basin area of the Orange County Groundwater Basin as part of the South Basin Groundwater Protection Project (SBGPP). Groundwater modeling will be conducted in support of Feasibility Study evaluations to develop an interim remedy that addresses regional contaminants of concern that have impacted groundwater within the South Basin. Specifically, the objective of the South Basin groundwater model is to simulate a flow field that is representative of groundwater flow conditions in the area to provide a tool that will aid in evaluation of interim remedial alternatives. The evaluations will be based on model-projected water levels and particle tracking using a flow-modeling approach. SCOPE OF WORK The groundwater modeling task will involve several subtasks including: Task 1a) Numerical groundwater flow model development; Task 1b) Numerical groundwater flow model calibration; Task 1c) Remedial alternative simulations; Task 1d), Sensitivity analysis; and Task 1e) Preparation of an appendix to the Feasibility Study report summarizing modeling activities. Task 1a – Groundwater Flow Model Development A groundwater flow model will be developed based on the hydrogeologic conceptual model of the regional and local groundwater system.
    [Show full text]
  • Introduction of MODFLOW
    Introduction of MODFLOW Yangxiao Zhou [email protected] General Information • Developed by McDonald & Harbaugh of the USGS, in 1983 • Public Domain available in 1988 • Block-Centered, 3D, modular structural, finite difference groundwater flow model • Most widely used groundwater flow model • Steady-state or transient saturated flow in porous medium • Currently MODFLOW-2000 and MODFLOW-2005 are used • MODFLOW 6 is recently released in 2017 • Download site: https://water.usgs.gov/ogw/modflow/ Mathematical model 3D groundwater flow in the saturated heterogeneous and anisotropic porous media: ∂ ∂h ∂ ∂h ∂ ∂h ∂h ( Kxx ) + ( K yy ) + ( Kzz ) −W = Ss ∂x ∂x ∂y ∂y ∂z ∂z ∂t where: -1 Kxx, Kyy, Kzz = values of hydraulic conductivity along xyz axes (LT ) h = total head (L) W = Sources and sinks (T-1) -1 Ss = Specific storage (L ) t = time (T) Finite Difference Model Model grid: • Rows, columns, layers • Count from the upper left corner • At the centre point of each cell (called a "node" ), groundwater head is to be calculated Finite Difference Model Model grid: • Block-centred grid • Horizontal grid: rectangular cell varies with size Finite Difference Model Model grid: • Block-centred • Vertical layers: layer thickness varies • Avoiding very thin layer MODFLOW flowchart The period of simulation is divided into a series of "stress periods" within which specified stress data are constant. Each stress period, in turn, is divided into a series of time steps. For each time step, the finite difference equation is formulated and solved numerically. When the
    [Show full text]
  • Numerical Modeling of Hydrogeologic Conditions Dewey-Burdock Project South Dakota
    NUMERICAL MODELING OF HYDROGEOLOGIC CONDITIONS DEWEY-BURDOCK PROJECT SOUTH DAKOTA POWERTECH DEWEY-BURDOCK PROJECT FALL RIVER AND CUSTER COUNTIES, SD February 2012 Petrotek Engineering Corporation 10288 West Chatfield Avenue, Suite 201 Littleton, Colorado 80127 Phone: (303) 290-9414 Fax: (303) 290-9580 TABLE OF CONTENTS 1 Introduction .................................................................................................... 1 2 Purpose and Objectives ................................................................................. 1 3 Conceptual Model .......................................................................................... 2 4 Model Development ....................................................................................... 7 4.1 Model Domain and Grid ............................................................................. 7 4.2 Boundary Conditions .................................................................................. 8 4.3 Aquifer Properties .................................................................................... 10 5 Model Calibration ......................................................................................... 12 5.1 Steady-State Calibration .......................................................................... 13 5.2 Transient Calibration ................................................................................ 13 5.3 Model Verification ..................................................................................... 14 5.4 Groundwater Flux Comparison
    [Show full text]
  • Application of an Integrated SWAT–MODFLOW Model to Evaluate Potential Impacts of Climate Change and Water Withdrawals on Groun
    water Article Application of an Integrated SWAT–MODFLOW Model to Evaluate Potential Impacts of Climate Change and Water Withdrawals on Groundwater–Surface Water Interactions in West-Central Alberta David Chunn 1,*, Monireh Faramarzi 1, Brian Smerdon 2 and Daniel S. Alessi 1 1 Department of Earth and Atmospheric Sciences, University of Alberta, Edmonton, AB, T6G 2E3, Canada; [email protected] (M.F.); [email protected] (D.S.A.) 2 Alberta Geological Survey, Alberta Energy Regulator, Edmonton, AB, T6B 2X3, Canada; [email protected] * Correspondence: [email protected]; Tel.: +1-403-702-1775 Received: 11 December 2018; Accepted: 3 January 2019; Published: 10 January 2019 Abstract: It has become imperative that surface and groundwater resources be managed as a holistic system. This study applies a coupled groundwater–surface water (GW–SW) model, SWAT–MODFLOW, to study the hydrogeological conditions and the potential impacts of climate change and groundwater withdrawals on GW–SW interactions at a regional scale in western Canada. Model components were calibrated and validated using monthly river flow and hydraulic head data for the 1986–2007 period. Downscaled climate projections from five General Circulation Models (GCMs), under the RCP 8.5, for the 2010–2034 period, were incorporated into the calibrated model. The results demonstrated that GW–SW exchange in the upstream areas had the most pronounced fluctuation between the wet and dry months under historical conditions. While climate change was revealed to have a negligible impact in the GW–SW exchange pattern for the 2010–2034 period, the addition of pumping 21 wells at a rate of 4680 m3/d per well to support hypothetical high-volume water use by the energy sector significantly impacted the exchange pattern.
    [Show full text]
  • Visual MODFLOW Premium
    Visual MODFLOW Premium Demo Tutorial Includes New Features of Visual MODFLOW and a Step-by-Step Tutorial © Waterloo Hydrogeologic Table of Contents 1. Introduction to Visual MODFLOW ...............................1 About the Interface ........................................................................................................1 Starting Visual MODFLOW .........................................................................................2 Getting Around In Visual MODFLOW ........................................................................................... 2 Screen Layout ................................................................................................................................... 3 Contacting Us ............................................................................................................4 2. Visual MODFLOW Premium Tutorial ..........................7 Introduction ....................................................................................................7 How to Use this Tutorial ...............................................................................................7 Terms and Notations ......................................................................................................................... 7 Description of the Example Model ...............................................................................8 3. Module I: Creating and Defining a Flow Model ............9 Section 1: Generating a New Model ..............................................................9
    [Show full text]