DOCSLIB.ORG

EICG-Hot Spots: EICG Appendix C

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
EICG-Hot Spots: EICG Appendix C [Note: The pre-existing regulation text is set forth below in normal type. The original proposed amendments are shown in underline to indicate additions and strikethrough to indicate deletions. Additional proposed modifications are shown in double underline to indicate additions and double strikethrough to indicate deletions. The square brackets “[ ]” are used to indicate minor adjustments to text (e.g., page numbers and adoption dates) that will be updated upon adoption of the proposed amendments.] APPENDIX C FACILITY GUIDELINE INDEX (FACILITY "LOOK-UP" TABLE) This Page Intentionally Left Blank APPENDIX C - I RESPONSIBILITIES OF ALL FACILITIES NOTES FOR APPENDIX CFACILITY GUIDELINE INDEX APPENDIX C‑I RESPONSIBILITIES OF ALL FACILITIES NOTHING IN THIS APPENDIX SHALL BE CONSTRUED AS REQUIRING THAT SOURCE TESTING BE CONDUCTED FOR SUBSTANCES SET FORTH IN THIS APPENDIX. FURTHER, IN CASES WHERE A SUBSTANCE SET FORTH HEREIN IS NOT PRESENT AT A PARTICULAR FACILITY, THE FACILITY OPERATOR SHALL NOT ATTEMPT TO QUANTIFY THE EMISSIONS OF SUCH SUBSTANCE, BUT SHALL PROVIDE ADEQUATE DOCUMENTATION TO DEMONSTRATE TO THE DISTRICT THAT THE POSSIBLE PRESENCE OF THE SUBSTANCE AT THE FACILITY HAS BEEN ADDRESSED AND THAT THERE ARE NO EMISSIONS OF THE SUBSTANCE FOR SPECIFIED REASONS. Substances emitted by a particular device or process may not be limited to those listed in this Facility Guideline Index. THIS APPENDIX IS NOT AN EXHAUSTIVE LIST. ALL FACILITIES ARE RESPONSIBLE FOR IDENTIFYING AND ACCOUNTING FOR ANY LISTED SUBSTANCE USED, MANUFACTURED, FORMULATED, OR RELEASED. This Facility Guideline Index is arranged in alphabetical order. The first part of the index, Appendix C‑I, lists devices common to many industries and the second part of the index, Appendix C‑II, lists industry types. Extensive cross-referencing has been incorporated into the index, particularly in Appendix C‑II, to identify industries and processes known by alternative names. It may be necessary to consult alternate names to locate a given industry type. Furthermore, more than one industry type may apply to a given facility. Sample SIC codes have been provided for some industry sectors in Appendix C‑II to assist facilities in locating the list(s) of substances likely to be emitted by their industry. These SIC codes are not intended to be exhaustive. Notes For Appendix C‑I (1) The following substance abbreviations are used throughout the index: ADONA = Ammonium 4,8-dioxa-3H-perfluorononanoate (ADONA) and its Ammonium salt ATE = Allyl 2,4,6-tribromophenyl ether BaP = Benzo[a]Pyrene CFC-113 = Chlorinated fluorocarbon D4 = Octamethylcyclotetrasiloxane D5 = Decamethylcyclopentasiloxane, Decamethyl-1,3,5,7,9,2,4,6,8,10-pentaoxapentasilecane D6 = Dodecamethylcyclohexasiloxane 2,4-D = Dichlorophenoxyacetic acid Diesel engine PM = Diesel engine exhaust particulate matter Diesel engine TOG = Diesel engine exhaust total organic gas EDB = Ethylene dibromide EDC = Ethylene dichloride EGDMA = Ethylene glycol dimethacrylate EPTC = Ethyl dipropylthiocarbamate ETBE = Ethyl-tert-butyl ether ETO = Ethylene oxide MeIQ = 2-Amino-3,4-dimethylimidazo[4,5-f]quinoline MeIQx = 2-Amino-3,8-dimethylimidazo[4,5-f]quinoxaline MHF = Modified Hydrogen fluoride MIBK = Methyl isobutyl ketone, Hexone MOCA = 4,4'-Methylene bis(2-chloroaniline) MTBE = Methyl tert-butyl ether C-I – [1] PCBTF = 1-Chloro-4-(trifluoromethyl)benzene, 4-Chlorobenzotrifluoride Perc = Perchloroethylene, Tetrachloroethylene PFOS = Perfluorooctanesulfonate PFOA = Perfluorooctanoic acid PBBs = Polybrominated biphenyls PCBs = Polychlorinated biphenyls PAHs = Polycyclic aromatic hydrocarbons POM = Polycyclic organic matter (other than PAHs) 1,1,1-TCA = 1,1,1-Trichloroethane, Methyl chloroform 1,1,2-TCA = 1,1,2-Trichloroethane, Vinyl trichloride TCE = Trichloroethylene delta-9-THC = delta-9-Tetrahydrocannabinol (2) PAHs are composed of the following substances: Acenaphthene Dibenzo[a,e]pyrene Acenaphthylene Dibenzo[a,h]pyrene Anthracene Dibenzo[a,i]pyrene Benz[a]anthracene Dibenzo[a,l]pyrene Benzo[b]fluoranthene Fluoranthene Benzo[j]fluoranthene Fluorene Benzo[k]fluoranthene Indeno[1,2,3,-cd]pyrene Benzo[a]pyrene Naphthalene Benzo[g,h,i]perylene Phenanthrene Chrysene Pyrene Dibenzo[a,h]anthracene (3) Substances emitted by a particular device or process may not be limited to those listed in this Facility Guideline Index. ALL FACILITIES ARE RESPONSIBLE FOR IDENTIFYING AND ACCOUNTING FOR ANY LISTED SUBSTANCE USED, MANUFACTURED, FORMULATED, OR RELEASED; THIS APPENDIX IS NOT AN EXHAUSTIVE LIST. (5) This Facility Guideline Index is arranged in alphabetical order. The first part of the index, Appendix C‑I, lists devices common to many industries and the second part of the index, Appendix C‑II, lists industry types. Extensive cross-referencing has been incorporated into the index, particularly in Appendix C‑II, to identify industries and processes known by alternative names. It may be necessary to consult alternate names to locate a given industry type. Furthermore, more than one industry type may apply to a given facility.
Load more

Recommended publications
  • United States Patent ‘ Patented Mar
    r 2,786,869 United States Patent ‘ Patented Mar. 26, 1957 l 2 tically, mixtures of tert-alkylamine such as are available on the market. Typical mixtures are those containing ‘ 2,786,869 C12H25NH2 to C15H31NH2 or C18H3'INH2 to C24H49NH2 N-TRIALKYLCARBINYL-N-(HYDROXYETHYL or C15H31- to C24H49NH2. These may be represented by POLYOXYETHYL) GLYCINES the formula Peter L. de Benneville and Homer J. Sims, Philadelphia, 31 Pa., assignors to Rohrn & Haas Company, Philadelphia, R’-—-C—NH2 Pa., a corporation of Delaware Rs No Drawing. Application June 16, 1954, 10 As catalysts in the ?rst step of the process of this Serial No. 437,273 invention, wherein the hydroxyethyl group is introduced, 9 Claims.‘ (or. 260-534) there may be used any of the strong acids, such as hy drochloric, hydrobromic, sulfuric, arylsulfonic, alkanesul fonic, or phosphoric. The preferred amount of this cat This invention relatesto-compounds of the structure 15 alyst is 10 to 30 mole percent of the amine. With R1 '(CH2CH2O),.H ‘ , amines from 12 carbon atoms upward it is exceedingly di?icult to introduce more than one hydroxyethyl group in a tert-alkylamine molecule. Such amines‘yicld ?nal 3 \CHrCOOH products which have the desired balance of properties. ' wherein R1, R2, and R3 are alkyl groups containing a 20 The ?rst reaction with ethylene oxide is effected by total of 11 to 23 carbon atoms and n is an integer having bringing together ethylene oxide and tert-alkylamine, a value from 5 to about 50 or more, preferably 5 to 25. usually by passing ethylene oxide into amine and catalyst, These compounds may be called N-(trialkylcarbinyl)-N at temperatures from 0° to 180° C.
    [Show full text]
  • 239 Subpart K—Indirect Discharge Point Sources
    Environmental Protection Agency § 414.111 BAT effluent limita- streams contain significant amounts of tions and NSPS 1 the pollutants identified above. Any such streams designated as metal or Effluent characteristics Maximum Maximum for cyanide bearing must be treated inde- for any monthly one day average pendently of other metal or cyanide bearing waste streams unless the con- 1,1,1-Trichloroethane ........................ 59 22 1,1,2-Trichloroethane ........................ 127 32 trol authority determines that the Trichloroethylene ............................... 69 26 combination of such streams, prior to Vinyl Chloride .................................... 172 97 treatment, with the Appendix A waste 1 All units are micrograms per liter. streams will result in substantial re- 2 Total Zinc for Rayon Fiber Manufacture that uses the vis- cose process and Acrylic Fibers Manufacture that uses the duction of these pollutants. This deter- zinc chloride/solvent process is 6,796 μg/l and 3,325 μg/l for mination must be based upon a review maximum for any one day and maximum for monthly average, respectively. of relevant engineering, production, and sampling and analysis information. [52 FR 42568, Nov. 5, 1987, as amended at 58 1 FR 36893, July 9, 1993] PSES and PSNS Maximum Effluent characteristics Maximum for any Subpart K—Indirect Discharge for any monthly Point Sources one day average Acenaphthene ................................... 47 19 SOURCE: 58 FR 36893, July 9, 1993, unless Anthracene ........................................ 47 19 otherwise noted. Benzene ............................................ 134 57 Bis(2-ethylhexyl) phthalate ................ 258 95 Carbon Tetrachloride ......................... 380 142 § 414.110 Applicability; description of Chlorobenzene .................................. 380 142 the subcategory of indirect dis- Chloroethane ..................................... 295 110 charge point sources. Chloroform ........................................
    [Show full text]
  • Development of Microplate Screening System
    DEVELOPMENT OF MICROPLATE SCREENING SYSTEM AND CONSTRUCTION OF FLUORESCEIN-BASED LIBRARY FENG SUIHAN A THESIS SUMBITTED FOR THE DEGREE OF MASTER OF SCIENCE DEPARTMENT OF CHEMISTRY NATIONAL UNIVERSITY OF SINGAPORE 2010 Acknowledgements First of all, I would like to express my deep gratitude to my supervisor, Associate Professor Young-Tae Chang for his profound knowledge, invaluable guidance, constant support and inspiration throughout my graduate studies. The knowledge, both scientific and otherwise, that I accumulated under his supervision, will aid me greatly throughout my life. Next, I would like to give my sincere thanks to Dr. Marc Vendrell and Dr. Hyung-Ho Ha, for their warm support during my entire graduate studies. Besides, my sincere thinks goes to Miss Siqiang Yang, who helped me to set up the microplate screening platform. Also, I would like to thank all the graduate students of Chang lab, Animesh, Duanting, Ghosh, Jun-Seok, Yun-Kyung, Raj, for their cordiality and friendship. We had a great time together. I also benefited from all other lab members, particularly but not limited to, Siti, Yee Ling, Chew Yan, Xubin, Jeffrey, Shin Hui, Dr. Bi, Dr. Cho, Dr. Jun Li, Dr. Lees, Dr. Kang, Dr. Kim, Dr. Park, and etc. Thanks for making the working place an enjoyable one. I am grateful to Dr. Tan for recruiting me into NUS Medicinal Chemistry graduate program and I am also thankful to NUS for awarding me the research scholarship. At last, I would like to express greatest thanks to my family, particularly my wife, Bai Yang, whose encourage and understanding help me to finish my graduate study in NUS.
    [Show full text]
  • Toxicological Profile for Glyphosate Were
    A f Toxicological Profile for Glyphosate August 2020 GLYPHOSATE II DISCLAIMER Use of trade names is for identification only and does not imply endorsement by the Agency for Toxic Substances and Disease Registry, the Public Health Service, or the U.S. Department of Health and Human Services. GLYPHOSATE III FOREWORD This toxicological profile is prepared in accordance with guidelines developed by the Agency for Toxic Substances and Disease Registry (ATSDR) and the Environmental Protection Agency (EPA). The original guidelines were published in the Federal Register on April 17, 1987. Each profile will be revised and republished as necessary. The ATSDR toxicological profile succinctly characterizes the toxicologic and adverse health effects information for these toxic substances described therein. Each peer-reviewed profile identifies and reviews the key literature that describes a substance's toxicologic properties. Other pertinent literature is also presented, but is described in less detail than the key studies. The profile is not intended to be an exhaustive document; however, more comprehensive sources of specialty information are referenced. The focus of the profiles is on health and toxicologic information; therefore, each toxicological profile begins with a relevance to public health discussion which would allow a public health professional to make a real-time determination of whether the presence of a particular substance in the environment poses a potential threat to human health. The adequacy of information to determine a substance's
    [Show full text]
  • Hydroxyacetonitrile (HOCH2CN) As a Precursor for Formylcyanide (CHOCN), Ketenimine (CH2CNH), and Cyanogen (NCCN) in Astrophysical Conditions
    A&A 549, A93 (2013) Astronomy DOI: 10.1051/0004-6361/201219779 & c ESO 2013 Astrophysics Hydroxyacetonitrile (HOCH2CN) as a precursor for formylcyanide (CHOCN), ketenimine (CH2CNH), and cyanogen (NCCN) in astrophysical conditions G. Danger1, F. Duvernay1, P. Theulé1, F. Borget1, J.-C. Guillemin2, and T. Chiavassa1 1 Aix-Marseille Univ, CNRS, PIIM UMR 7345, 13397 Marseille, France e-mail: [email protected] 2 Institut des Sciences Chimiques de Rennes, École Nationale Supérieure de Chimie de Rennes, CNRS, UMR 6226, Avenue du Général Leclerc, CS 50837, 35708 Rennes Cedex 7, France Received 8 June 2012 / Accepted 19 November 2012 ABSTRACT Context. The reactivity in astrophysical environments can be investigated in the laboratory through experimental simulations, which provide understanding of the formation of specific molecules detected in the solid phase or in the gas phase of these environments. In this context, the most complex molecules are generally suggested to form at the surface of interstellar grains and to be released into the gas phase through thermal or non-thermal desorption, where they can be detected through rotational spectroscopy. Here, we focus our experiments on the photochemistry of hydroxyacetonitrile (HOCH2CN), whose formation has been shown to compete with aminomethanol (NH2CH2OH), a glycine precursor, through the Strecker synthesis. Aims. We present the first experimental investigation of the ultraviolet (UV) photochemistry of hydroxyacetonitrile (HOCH2CN) as a pure solid or diluted in water ice. Methods. We used Fourier transform infrared (FT-IR) spectroscopy to characterize photoproducts of hydroxyacetonitrile (HOCH2CN) and to determine the different photodegradation pathways of this compound. To improve the photoproduct identifications, irradiations of hydroxyacetonitrile 14N and 15N isotopologues were performed, coupled with theoretical calculations.
    [Show full text]
  • 1 Abietic Acid R Abrasive Silica for Polishing DR Acenaphthene M (LC
    1 abietic acid R abrasive silica for polishing DR acenaphthene M (LC) acenaphthene quinone R acenaphthylene R acetal (see 1,1-diethoxyethane) acetaldehyde M (FC) acetaldehyde-d (CH3CDO) R acetaldehyde dimethyl acetal CH acetaldoxime R acetamide M (LC) acetamidinium chloride R acetamidoacrylic acid 2- NB acetamidobenzaldehyde p- R acetamidobenzenesulfonyl chloride 4- R acetamidodeoxythioglucopyranose triacetate 2- -2- -1- -β-D- 3,4,6- AB acetamidomethylthiazole 2- -4- PB acetanilide M (LC) acetazolamide R acetdimethylamide see dimethylacetamide, N,N- acethydrazide R acetic acid M (solv) acetic anhydride M (FC) acetmethylamide see methylacetamide, N- acetoacetamide R acetoacetanilide R acetoacetic acid, lithium salt R acetobromoglucose -α-D- NB acetohydroxamic acid R acetoin R acetol (hydroxyacetone) R acetonaphthalide (α)R acetone M (solv) acetone ,A.R. M (solv) acetone-d6 RM acetone cyanohydrin R acetonedicarboxylic acid ,dimethyl ester R acetonedicarboxylic acid -1,3- R acetone dimethyl acetal see dimethoxypropane 2,2- acetonitrile M (solv) acetonitrile-d3 RM acetonylacetone see hexanedione 2,5- acetonylbenzylhydroxycoumarin (3-(α- -4- R acetophenone M (LC) acetophenone oxime R acetophenone trimethylsilyl enol ether see phenyltrimethylsilyl... acetoxyacetone (oxopropyl acetate 2-) R acetoxybenzoic acid 4- DS acetoxynaphthoic acid 6- -2- R 2 acetylacetaldehyde dimethylacetal R acetylacetone (pentanedione -2,4-) M (C) acetylbenzonitrile p- R acetylbiphenyl 4- see phenylacetophenone, p- acetyl bromide M (FC) acetylbromothiophene 2- -5-
    [Show full text]
  • Acute Tetraethyllead Poisoning
    Arch. Toxikol. 24, 283--291 (1969) Acute Tetraethyllead Poisoning M. STASIK, Z. BYCZKOWSKA, S. SZENDZIKOWSKI,and Z. FIEDOttCZUK Clinical and Pathomorphological Department, Institute of Occupational Medicine, L6@, Poland, Department of Forensic Medicine, Medical Academy, L6dA l%eceived September 16, 1968 Summary. Four cases of accidental poisoning with tetraethyllead are described. Three out of four of the patients died. In the first case, pure ethyl fluid was accidentally ingested. Dominating the clinical picture of this patient were signs of greatly elevated intracranial pressure. Three other persons were poisoned as a group. They unknowingly inhaled tetra- ethyllead contained in a paint solvent they used. In these three cases, the intoxication manifested itself predominantly as a mental disorder suggestive of schizophrenia. Gross and microscopic changes observed in the fatal cases gave evidence of a capillary vascular lesion, particularly involving the vessels of the CNS. Liver damage and less severe damage to the heart muscle and kidney parenchyma were also noted. The distribution as well as the extent of the above mentioned lesions correlate approximately with the distribution and concentration of triethyllead in the various internal organs. Key- Words: Tetraethyllead -- Mental Disorder -- Damage to Parenchymatous Organs. Zusammen/assung. Die Verfasser berichten fiber 4 F/ille, yon denen 3 tSdlich waren, zuf~lliger Vergiftungen durch das sog. Ethylfluid, das Bleitetra~thyl enthElt. Im ersten Fall trat die t6dliche Vergiftung infolge irrtfimlich getrunkenem Ethylfluid auf. Als klinisches Symptom entstand erh6hter intrakranieller Druck. In den drei n~ehsten F~llen besa6 die Vergiftung einen kollektiven Charakter und war durch den Respirationstrakt zustande gekommen; zwei von den Vergifteten sind gestorben.
    [Show full text]
  • Zinc Chloride Catalyzed Multicomponent Synthesis of Pyrazolopyridocoumarin Scaffolds
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by ePrints@Bangalore University J. Chem. Sci. (2019) 131:29 © Indian Academy of Sciences https://doi.org/10.1007/s12039-019-1610-0 REGULAR ARTICLE Zinc chloride catalyzed multicomponent synthesis of pyrazolopyridocoumarin scaffolds DEVADAS SHAMALAa, KALEGOWDA SHIVASHANKARa,∗ , CHANDRAb and MADEGOWDA MAHENDRAb aP. G. Department of Chemistry, Bangalore University, Central College Campus, Bangalore, Karnataka 560 001, India bDepartment of Studies In Physics, Manasagangotri, University of Mysore, Mysore, Karnataka 570 006, India E-mail: [email protected] MS received 4 October 2018; revised 20 February 2019; accepted 27 February 2019; published online 22 March 2019 Abstract. An efficient synthesis of a series of pyrazolopyridocoumarins is reported by condensation of 4- hydroxycoumarin, benzaldehydes and 1-alkyl-5-amino-pyrazoles in the presence of 10 mol% zinc chloride in ethanol under reflux conditions through one-pot reaction. The significant attraction of this protocol is being a simple procedure, mild reaction condition, and excellent yield. The molecular structure of the compound (4e) is established by single crystal X-ray structure determination. Keywords. Coumarins; pyridine; pyrazole; zinc chloride; multicomponent reactions; one-pot synthesis. 1. Introduction have been developed for the preparation of pyra- zolopyridocoumarin derivatives with the use of various Multicomponent reactions (MCRs) efficiently combine catalysts such as n-tetrabutylammonium tribromide, 28 29 30 three or more reactants simultaneously in one pot that do Zn(OTf)2, glacial acetic acid, piperidine in acetic not need the isolation, purification and characterization acid, 31 and iodine. 19,32 However, these methodologies of intermediate products.
    [Show full text]
  • Gasket Chemical Services Guide
    Gasket Chemical Services Guide Revision: GSG-100 6490 Rev.(AA) • The information contained herein is general in nature and recommendations are valid only for Victaulic compounds. • Gasket compatibility is dependent upon a number of factors. Suitability for a particular application must be determined by a competent individual familiar with system-specific conditions. • Victaulic offers no warranties, expressed or implied, of a product in any application. Contact your Victaulic sales representative to ensure the best gasket is selected for a particular service. Failure to follow these instructions could cause system failure, resulting in serious personal injury and property damage. Rating Code Key 1 Most Applications 2 Limited Applications 3 Restricted Applications (Nitrile) (EPDM) Grade E (Silicone) GRADE L GRADE T GRADE A GRADE V GRADE O GRADE M (Neoprene) GRADE M2 --- Insufficient Data (White Nitrile) GRADE CHP-2 (Epichlorohydrin) (Fluoroelastomer) (Fluoroelastomer) (Halogenated Butyl) (Hydrogenated Nitrile) Chemical GRADE ST / H Abietic Acid --- --- --- --- --- --- --- --- --- --- Acetaldehyde 2 3 3 3 3 --- --- 2 --- 3 Acetamide 1 1 1 1 2 --- --- 2 --- 3 Acetanilide 1 3 3 3 1 --- --- 2 --- 3 Acetic Acid, 30% 1 2 2 2 1 --- 2 1 2 3 Acetic Acid, 5% 1 2 2 2 1 --- 2 1 1 3 Acetic Acid, Glacial 1 3 3 3 3 --- 3 2 3 3 Acetic Acid, Hot, High Pressure 3 3 3 3 3 --- 3 3 3 3 Acetic Anhydride 2 3 3 3 2 --- 3 3 --- 3 Acetoacetic Acid 1 3 3 3 1 --- --- 2 --- 3 Acetone 1 3 3 3 3 --- 3 3 3 3 Acetone Cyanohydrin 1 3 3 3 1 --- --- 2 --- 3 Acetonitrile 1 3 3 3 1 --- --- --- --- 3 Acetophenetidine 3 2 2 2 3 --- --- --- --- 1 Acetophenone 1 3 3 3 3 --- 3 3 --- 3 Acetotoluidide 3 2 2 2 3 --- --- --- --- 1 Acetyl Acetone 1 3 3 3 3 --- 3 3 --- 3 The data and recommendations presented are based upon the best information available resulting from a combination of Victaulic's field experience, laboratory testing and recommendations supplied by prime producers of basic copolymer materials.
    [Show full text]
  • EPA/Diethylenetriamine
    Thursday May 23~1~S5 Part~ Environmental. Protection Agency 40 CFR Part 79S Dlsthyl.ne1flamine identification ~ Specific chemical Substance and MkU~e testhig Requirements; Final Rule Dl.thyfert.trlamlne; Proposed Teat Rule; — Rule JI~ 21398 Federal Register f Vol. 50. No. 100 1 Thursday, May 23. 1985 / Rules and Regulations ENVIRONMENTAL PROTECTION chemical fate testing (underaerobic relevant to assessing the risks to health AGENCY conditions only) for DETA. and the environment posed by exposure 1. Introduction to particular chemical substances or 40 CER Pal 799 This notice is part of the overall mixtures. implementation of section 4 of the Toxic Under section 4(a)(1) of TSCA. EPA (OPTS-420129 19*4-FRI. 2815-Sal Substances Control Act(TSCA, Pub. L. must require testing of a chemical 94.-469, 90 Stat 2003 etseq.. 15 US.C. substance to develop health or Idantificatlon of Specific Chsnilcal environmentaldata if the Administrator Substance and Mixture Testing 2801 et seq.) whichcontains authority R.qulrem.ntLD4.thylen.thamln. for EPA to require development of data finds that: AOSNCY Environmental Protection (A)(i) th. manufacture, distribution in commerce, proc. Agency (EPA). eonng, use, or disposal of a chemical substanceor mixture, or that .*CT*Osc Final rule. any combination of such activities, may present an unreasonable riakof injuryto health or the environment, (n) there are insu~cientdata and.aqerience upon which the ai~anv:This rule establishes testing effects of such manufacture, distribution in commerce, processing, requirements under section 4(a) of the ma,or disposal.of such substance or iI~iThweor of any combine- Toxic Substances Control Act(TSCA) tion of such activities on health or thf.Invironment can reason- for manufacturers and processorsof ably be determined or predicted, and diethylenetriamine (DETA~CAS No.
    [Show full text]
  • TR-332: 2-Mercaptobenzothiazole (CASRN 149-30-4) in F344/N Rats and B6c3f1mice (Gavage Studies)
    NATIONAL TOXICOLOGY PROGRAM Technical Report Series No. 332 TOXICOLOGY AND CARCINOGENESIS STUDIES OF 2-MERCAPTOBENZOTHIAZOLE (CAS NO. 149-30-4) IN F344/N RATS AND B6C3F1 MICE (GAVAGE STUDIES) U.S. DEPARTMENT OF HEALTH AND HUMAN SERVICES Public Health Service National Institutes of Health NATIONAL TOXICOLOGY PROGRAM The National Toxicology Program (NTP), established in 1978,develops and evaluates scientific information about potentially toxic and hazardous chemicals. This knowledge can be used for protecting the health of the American people and for the primary prevention of disease. By bringing to- gether the relevant programs, staff, and resources from the US. Public Health Service, DHHS, the National Toxicology Program has centralized and strengthened activities relating to toxicology research, testing and test developmenthalidation efforts, and the dissemination of toxicological in- formation to the public and scientific communities and to the research and regulatory agencies. The NTP is made up of four charter DHHS agencies: the National Cancer Institute (NCI), National Institutes of Health; the National Institute of En- vironmental Health Sciences (NIEHS), National Institutes of Health; the National Center for Toxicological Research (NCTR), Food and Drug Ad- ministration; and the National Institute for Occupational Safety and Health (NIOSH), Centers for Disease Control. In July 1981, the Carcino- genesis Bioassay Testing Program, NCI, was transferred to the NIEHS. 2-Mercaptobenzothiazole,NTP TR 332 NTP TECHNICAL REPORT ON THE TOXICOLOGY AND CARCINOGENESIS STUDIES OF 2-MERCAPTOBENZOTHIAZOLE (CAS NO. 149-30-4) IN F344/N RATS AND B6C3F1 MICE (GAVAGE STUDIES) Michael P. Dieter, Ph.D., Chemical Manager NATIONAL TOXICOLOGY PROGRAM P.O. Box S2233 Research Triangle Park, NC 27709 May 1988 NTP TR 332 NIH Publication No.
    [Show full text]
  • BIO-BASED SUCCINIC ACID by Sudeep Vaswani (December 2010)
    PEP Review 2010-14 BIO-BASED SUCCINIC ACID By Sudeep Vaswani (December 2010) ABSTRACT In a U.S. Department of Energy report published in 2004, succinic acid was identified as one of the top twelve building-block chemicals that could be produced from renewable feedstocks. Currently, succinic acid uses a petroleum-derived maleic anhydride route for its production, which is both costly and environmentally unfriendly. As a result, there is a growing interest towards discovering a more economical and environmentally cleaner way for its production. One methodology that has been receiving increased attention is the use of bacterial microorganisms. This technology takes advantage of the fermentative capabilities of various microorganisms and utilizes a renewable substrate as a carbon source for acid formation. Succinic acid production from microbial organisms has tremendous potential as a building block for commodity chemicals with applications in several industries. Some of the succinic acid derivatives include: tetrahydrofuran (THF), 1,4-butanediol (BDO), succindiamide, succinonitrile, dimethylsuccinate, N-methyl-pyrrolidone, 2-pyrrolidone, and 1,4-diaminobutane. This PEP Review discusses and provides a detailed techno-economic analysis for bio-based succinic acid production with a capacity of 82.7 million lb/year (37,500 mt/yr). Additionally, it covers information regarding genetic engineering mechanisms, regulation of specific enzymes, and purification of succinic acid to provide a cost-competitive alternative to fossil fuels. © SRI Consulting PEP Review 2010-14 A private report by the Process Economics Program Review No. 2010-14 BIO-BASED SUCCINIC ACID by Sudeep Vaswani December 2010 Menlo Park, California 94025 SRIC agrees to assign professionally qualified personnel to the preparation of the Process Economics Program’s reports and will perform the work in conformance with generally accepted professional standards.
    [Show full text]