Bulk Survey for Release (BSFR)

Total Page：16

File Type：pdf, Size：1020Kb

Off-Site Processing of LLRW Material PROCESSING OF RADIOACTIVE WASTE Bulk Survey For Release (BSFR) Studsvik can easily dispose of large volumes of your lightly contaminated radioactive materials in an efficient and cost-effective manner. The Studsvik Bulk Survey For Release (BSFR) Serv- The BSFR Service Program is highly success- ice Program, similar to past programs known ful and will survey and dispose of nearly as “green is clean,” allows Studsvik to survey 80,000,000 pounds annually. These routinely and dispose of homogeneously contaminated generated waste materials are generated materials in specified (Subtitle D) industrial through operational activities from: waste landfills. From our fixed facility located in Memphis, Tennessee, the Studsvik BSFR Service • Commercial nuclear power plants Program processes and ultimately disposes of • Decommissioning and clean-up projects. waste materials in a manner that is significantly • Various industrial facilities less expensive to the client than disposal at li- censed LLRW disposal sites. Our License permits the disposal of over 90 spe- cific radioisotopes and practically all forms of high or medium density solid waste materials. These materials include: • Paper/Plastic/Cardboard • Wood • Rubber • Concrete & Building Rubble • Metals • Soils/Sand/Gravel/Asphalt • Aqueous Liquids • Oils/Grease Workers at Studsvik Processing Facility Memphis • Resins/Sludges/Charcoal sorting incoming waste material for BSFR • Most all non-RCRA Waste Materials Studsvik utilizes a portable CANBERRA (ISOCS) gamma spectroscopy system to survey waste BSFR wastes disposed of since 2005: materials. Materials can be shipped in any size ► 2005, disposed of 78 million pounds container, including intermodal container or ► 2006, disposed of 71 million pounds railcars, and pre-screening of waste can also be ► 2007, disposed of 46 million pounds done at the customer’s site. Studsvik Processing Facility Memphis, LLC 2550 Channel Ave PO Box 13143 Memphis, TN 38113 Phone: (901) 775-0690 Telefax: (901) 775-0629 www.studsvik.com.

Copy Link

Recommended publications

Studsvik Scandpower Overview
Studsvik Scandpower Overview Thomas Smed 2012 International Users Group Meeting Charlotte, NC, USA | May 2-3, 2012 Studsvik Scandpower direction Mission: “World Class Nuclear Fuel Analysis Software” May, 2-3 International Users Group Meeting Studsvik Product Line (CMS) CASMO GARDEL State-of-the-Art Lattice Physics Code Advanced Core Monitoring SIMULATE MARLA 3D, Steady-State Nodal Simulator BWR Shuffle Optimization CMSOps SNF Automated Reactivity Management 3D Spent Nuclear Fuel Analysis SIMULATE-3K HELIOS 3D Transient and Safety Analysis General-Geometry Lattice Physics XIMAGE Automated Loading Pattern Design CMS/ENIGMA Thermo-mechanical Fuel Performance S3R Cycle-Specific Simulator Model Engineering Services May 2-3, 2012 International Users Group Meeting Model Refinements – Key to Accuracy • CASMO5 – Method of Characteristics (exact heterogeneous geometry) – Cross section developments (ENDF-IVENDF-VIJEF ENDF-VII) – Improved resonance models (spatial and up-scattering) – Refined transport spatial and energy meshes (70 to 586 groups) May, 2-3 International Users Group Meeting Explicit Shielding of Low Energy Resonances 6.67, 20.87, 36.7 eV Pu240 Pu239 U235 U238 Fine groups Shielded May 2-3,2012 International Users Group Meeting SIMULATE5 – Radial and axial heterogeneous, multi-group models – Microscopic nuclide depletion Nodes Subnodes Radial Sub-mesh Reflector Nat. Blanket z Spacer Spacer Flux/volume Weighting Control Rod Axial Discontinuity Spacer factors Nat. Blanket May, 2-3 International Users Group Meeting Studsvik Software Mission
[Show full text]
Annual Report 2006 Report Annual Studsvik
Studsvik Annual Report 2006 Annual Report 2006 Studsvik AB (publ) P.O. Box 556 SE-611 10 Nyköping Sweden www.studsvik.se Visiting address: Västra Trädgårdsgatan 38 Calendar Addresses General Meeting of Shareholders, Studsvik AB Studsvik, Inc./Studsvik “With this year’s extensive initiatives, we have created Visiting address: Processing Facility, LLC April 19, 2007 Västra Trädgårdsgatan 38 100 Nolichucky Avenue The General Meeting will be held at 4 p.m. on Thursday, P.O. Box 556 Erwin, TN 37650 an organization with strong resources and the capacity April 19, 2007 at The World Trade Center, Klarabergs- SE-611 10 Nyköping USA Sweden Tel +1 423 735 6300 viadukten 70/Kungsbron 1, Stockholm, Sweden. Tel +46 155 22 10 00 Fax +1 423 735 4143 to grow, plus an entirely different international presence Notification Fax +46 155 26 30 00 [email protected] Studsvik Nuclear AB Shareholders wishing to participate must be registered in VPC www.studsvik.com SE-611 82 Nyköping AB’s share register, by no later than April 13, 2007, and must Sweden than just a year ago. We have enhanced our offering, submit a notification of their intention to attend by no later than Studsvik Industrieservice Tel +46 155 22 10 00 April 13: GmbH & Co. KG/ Fax +46 155 26 30 70 • By telephone on +46 155 22 10 33, Studsvik Industrieanlagen GmbH & Co. KG Studsvik Scandpower, Inc. our organizational resources and delivery capacity.” • By mail to Studsvik AB, P.O. Box 556, SE-611 10 Nyköping, Sweden, Karlsruher Str 20 1087 Beacon Street, Suite 301 • By e-mail to [email protected], D-75179 Pforzheim Newton, MA 02459-1700 • By fax on +46 155 26 30 00 or Magnus Groth, President and Chief Executive Officer Germany USA • From Studsvik’s Website, www.studsvik.se.
[Show full text]
Studsvik's Operations in Germany to Be a Separate Business Area
PRESS RELEASE 1 (1) March 20, 2018 Studsvik's operations in Germany to be a separate business area The operations in Germany, which today are part of the Consultancy Services business area, will become a separate business area called Germany from April 1, 2018. Studsvik's organization will then consist of four business areas: • Consultancy Services, Head of Business Area Stefan Bergström • Fuel and Materials Technology, Head of Business Area Joakim Lundström • Scandpower, Head of Business Area Steven Freel • Germany, Head of Business Area Bengt Pihl Bengt Pihl has been head of the German operations since spring 2016. He has previously held senior positions in large industrial concerns both in Sweden and in Germany. The new structure follows Studsvik's operations more clearly and provides a focus for the measures being taken to improve profitability in Germany. Financial reporting under the new structure will start as of the first quarter of 2018. For further information, please contact: Pål Jarness, CFO, +46 155 22 10 09 or Camilla Hoflund, President and CEO, +46 155 22 10 66 Facts about Studsvik Studsvik offers a range of advanced technical services to the global nuclear power industry. Studsvik's business focus areas are fuel and materials technology, reactor analysis software for core monitoring and fuel optimization and consultancy services in waste treatment technology, decommissioning, NORM and solutions for final disposal. The company has 70 years’ experience of nuclear technology and radiological services. Studsvik has 700 employees in 7 countries and the company’s shares are listed on NASDAQ Stockholm. This information is information that Studsvik AB (publ) is obliged to disclose pursuant to the EU Market Abuse Regulation.
[Show full text]
Docket No. 2011-1905-RUL. Outlined Summary Indicating Changes Since Pre-Filing for 30 TAC Chapter 336, Radioactive Substance Rules SB 1504: Phase I (Rule Project No
Changes since Pre-filing for May 16 Agenda Texas Commission on Environmental Quality INTEROFFICE MEMORANDUM To: Commissioners Date: April 27, 2012 Thru: Bridget C. Bohac, Chief Clerk Mark Vickery, P.G., Executive Director From: Brent Wade, Deputy Director Office of Waste Subject: Docket No. 2011-1905-RUL. Outlined summary indicating changes since pre-filing for 30 TAC Chapter 336, Radioactive Substance Rules SB 1504: Phase I (Rule Project No. 2011-036-336-WS) The attached revisions are shown in double underline/double strikeout and are provided as REVISED PRE-FILING MATERIAL to the documents filed on April 13, 2012, scheduled for your consideration on the May 16, 2012, agenda. Some edits were made to add to the readability or correct grammatical mistakes of the preamble, response to comments, and the interoffice memorandum for commission approval for rulemaking adoption. They will not be mentioned in this memorandum but have been shown in double underline/double strikeout. CHANGES TO PREAMBLE • On page 3 -- changed "party and nonparty generators" to "party state and nonparty state generators" to the section discussion of §336.702 to be consistent with the terms defined in the regulations. • On page 4 -- language was added to the section discussion of §336.702 to indicate that an applicability subsection was added as §336.745(a) in response to comments and that consequently the remaining subsections were re-lettered. • On page 6 -- language was added to the section discussion of §336.745 to expand the description of how the proposed commingling rules were changed based on different waste streams. • On pages 6 and 7 -- changed two-times an "and" to an "or" in the section discussion of §336.745(g) to correct an error.
[Show full text]
Studsvik Presentation: Management of Class B and C LLRW
Management of Class B and C LLRW Studsvik Pedigree 60 years of Service to the Nuclear Market • Studsvik founded in 1949 – Began as a branch of the Swedish government to develop, build and operate nuclear power plants in Sweden. – Early years, specialized in nuclear research, specifically • uranium production and • fuels and materials technology • Since those formative years – Has diversified its international holdings to become a full service nuclear company with over 1,200 employees and a presence in the US, UK, Germany, Sweden and Japan. Studsvik’s US Market Presence • Memphis, TN: Acquired RACE, LLC in 2006 • Erwin, TN: Began Operation in 1999 Studsvik – Erwin, TN In the Door Volume: ~300,000 ft3 Volume After Processing: ~ 60,000 ft3 Volume Saved: ~240,000 ft3 Volume Reduction Ratio: 5:1 Waste Streams Processed: • Resins Consisting of - – Bead and Powdered Resins; Charcoal; Sludge • Aqueous Liquids • Filter Cartridges (Inorganic and Organic) • Organic Waste Streams Studsvik’s US Market Presence • Erwin, TN: Began Operation in 1999 • Memphis, TN: Acquired RACE, LLC in 2006 Studsvik – Memphis, TN In the Door Volume: ~500M lbs Waste Streams Processed: • General Waste / DAW / Metals • Large Components (Pressurizers, Turbines, etc) • Aqueous / Organic Waste Streams • Decommissioning / Demolition Ruble Methodologies: Other Venture: • BSFR (Bulk Survey for Release) THOR Treatment Technologies, LLC, a • Survey for Free-Release joint venture with URS/Washington to • Waste Sorting / Volume Reduction practice the THOR process within the US Government.
[Show full text]
The Whole Body Monitor HUGO II at Studsvik Design and Operation L
The Whole Body Monitor HUGO II at Studsvik Design and Operation L. Devell, I. Nilsson and L. Venner AKTIEBOLAGET ATOMENERGI STUDSVIK, NYKOPING, SWEDEN 1970 AE-378 THE WHOLE BODY MONITOR HUGO II AT STUDSVIK. DESIGN AND OPERATION L Devell, I Nils son and L Venner ABSTRACT « The whole body monitor laboratory at Studsvik is presented with special attention to descriptions of localities, equipment, calibration and types of measurements. The main monitor, shielded by 53 tons of iron, is equipped with a 8 in. diam. x 4 in.Nal(Tl) detector and a 51 2- channel Nuclear Data analyzer and located at ground level in the Health and Safety Laboratory a few hundred metres from the various labora tories and reactors at Studsvik. Since the start in June 1 963 and up to January 1 969 more than 4500 measurements have been performed, most of them for radiation dose control purposes. In about 40 % of these latter measurements, in ternal contamination exceeding the normal detection limit of a few nCi has been observed. Only a few cases so far have exceeded the maximum permissible quarterly dose set by ICRP. Printed and distributed in January 1970. LIST OF CONTENTS 1. INTRODUCTION 2. THE LABORATORY 2. 1 Iron room 2. 2 Subject handling facilities 2. 3 Monitor operating room 2. 4 Remaining laboratory facilities 2. 5 Ventilation and temperature control 3. GEOMETRIES, DETECTORS AND ELECTRONIC EQUIPMENT 3. 1 Standard chair geometry 3. 2 Scanning bed 3. 3 Equipment for background control 4. RADIATION BACKGROUND 4. 1 Background reduction 4. 2 Stability of background 4.3 Body influence on the background 5.
[Show full text]
Nuclear Decommissioning Authority Business Plan 2018 to 2021
Business Plan 1 April 2018 to 31 March 2021 March 2018 NDA Business Plan 2018 to 2021 . Nuclear Decommissioning Authority Business Plan Financial year beginning April 2018 to fi nancial year ending March 2021 Business Plan presented to Parliament pursuant to Schedule 3 of the Energy Act 2004. Business Plan laid before Scottish Parliament by the Scottish Ministers pursuant to Schedule 3 of the Energy Act 2004. March 2018 SG/2018/36 NDA Business Plan 2018 to 2021 3 © Nuclear Decommissioning Authority copyright 2018 The text of this document (this excludes, where present, the Royal Arms and all departmental or agency logos) may be reproduced free of charge in any format or medium provided that it is reproduced accurately and not in a misleading context. The material must be acknowledged as Nuclear Decommissioning Authority copyright and the document title specifi ed. Where third party material has been identifi ed, permission from the respective copyright holder must be sought. Any enquiries related to this publication should be sent to us at: Business Planning Herdus House Westlakes Science & Technology Park Moor Row Cumbria CA24 3HU This publication is available at https://www.gov.uk/government/publications ISBN 978-1-5286-0257-0 CCS0318232456 03/18 Printed on paper containing 75% recycled fi bre content minimum Printed in the UK by APS on behalf of the Controller of Her Majesty’s Stationery Offi ce Some images supplied courtesy of businesses (sites) and NDA specialist subsidiaries. Every effort is taken to ensure the accuracy of material or images produced or used by the NDA.
[Show full text]
Studsvik to Postpone the Annual General Meeting
PRESS RELEASE 1 (2) April 7, 2020 Studsvik to postpone the Annual General Meeting In response to the current situation concerning Covid-19, the Board of Directors of Studsvik AB (publ) has decided to postpone the company’s Annual General Meeting until Tuesday June 23, 2020. It is hoped that the Meeting can then be arranged with less risk to the health and well-being of shareholders, employees and other stakeholders. The Annual General Meeting was previously planned to be held on April 29 at the World Trade Center in Stockholm. Notice of attendance at the Annual General Meeting can be given until Tuesday June 16, 2020. The shareholders who have already given notice of attendance remain signed up. The postponed Annual General Meeting will be held on Tuesday, June 23, 2020 at 16.00 at the World Trade Center, Klarabergsviadukten 70/Kungsbron 1, Stockholm. Registration for the Annual General Meeting starts at 15.00. Registration and notification of attendance Shareholders who wish to participate in the Annual General Meeting must • be registered in the share register kept by Euroclear Sweden AB by Tuesday, June 16, 2020, and • give notification to the company by Tuesday, June 16, 2020 at the latest. Notification of attendance can be given on the company’s website, www.studsvik.se; by telephone, +46 155 22 16 42; by fax, +46 155 26 30 70 or by email, [email protected]. Notification can also be given in writing to Studsvik AB, Annual General Meeting, SE 611 82 Nyköping. The notification must state name or business name, personal identity number or corporate identity number, address, telephone number and the number of advisors where relevant.
[Show full text]
Studsvik Signs Strategic Agreements for Dismantling of Nuclear Power Plants in Germany with a Total Order Value of SEK 135 Million
PRESS RELEASE 1 (1) June 29, 2021 Studsvik signs strategic agreements for dismantling of nuclear power plants in Germany with a total order value of SEK 135 million Studsvik has been working in dismantling for about 20 years in Germany and nearby countries. The agreements now signed create the foundation for long- term business relations. The services will be evenly distributed over a three-year period. Studsvik Decommissioning and Radiation Protection Services business area offers services in radiation protection, decommissioning, dismantling, decontamination, and engineering. Customers are nuclear power plants, research centers and other nuclear facilities in Germany, Switzerland, Belgium, and the Netherlands. “The new agreements are strategically important and confirm our long experience combined with innovative solutions in dismantling. Studsvik will continue to deliver high customer value on the dismantling market in Germany and nearby countries,” says CEO Camilla Hoflund. For further information, please contact: Camilla Hoflund, President and CEO, +46 76 002 10 66 Facts about Studsvik Studsvik offers a range of advanced technical services to the global nuclear power industry. Studsvik's business focus areas are fuel and materials technology, reactor analysis software, decontamination and radiation protection as well as technical platforms for handling, conditioning and volume reduction of radioactive waste. The company has more than 70 years’ experience of nuclear technology and radiological services. Studsvik has 515 employees in 7 countries and the company’s shares are listed on Nasdaq Stockholm. This information is information that Studsvik AB (publ) is obliged to disclose pursuant to the EU Market Abuse Regulation. The information was released for public disclosure, through the agency of the contact person above, on June 29, 2021, at 08:15 (CET).
[Show full text]
Annual Report 2019
Studsvik Annual Report 2019 Årsredovisning 2018 ANNUAL REPORT 2019 Studsvik AB (publ) SE-611 82 Nyköping Telephone +46 155 22 10 00 www.studsvik.com INFORMATION TO SHAREHOLDERS Worldwide ANNUAL GENERAL MEETING OF SHAREHOLDERS, APRIL 29, 2020 The Annual General Meeting will be held in Stockholm, World Trade Center, Klarabergsviadukten 70 / Kungsbron 1, on Wednesday, April 29, 2020, at 4 p.m. Notification Shareholders wishing to participate must be registered in the share register kept by Euroclear Sweden AB by Thursday, April 23, 2020, and must give notification of their intention to attend by Thursday, April 23, 2020. • via Studsvik’s website, www.studsvik.se. • by telephone, + 46 155 22 16 42, • by mail to Studsvik AB, SE-611 82 Nyköping, Sweden • by email to [email protected], or • by fax, +46 155 26 30 70 The shareholder’s notification should state • name • personal/corporate identity number • address and telephone number • number of shares For entitlement to vote at the Annual General Meeting, shareholders with nominee-registered holdings must apply to the bank or broker managing their shares for temporary re-registration a couple of banking days before Thursday, April 23, 2020. FORTHCOMING FINANCIAL INFORMATION 2020 SWEDEN JAPAN SWITZERLAND GERMANY USA • Interim Report January-March 2020 April 29 , 2020 Studsvik AB Studsvik Japan Ltd Studsvik Suisse AG Studsvik Scandpower GmbH Studsvik Scandpower, Inc. SE-611 82 Nyköping Rinku Gate Tower Schlösslistrasse 12, Rathausallee 28 101 North Third Street, Suite • Interim Report January–June
[Show full text]
Radioactive Waste Management and Decommissioning in Sweden
RADIOACTIVE WASTE MANAGEMENT AND DECOMMISSIONING IN SWEDEN 1. NATIONAL FRAMEWORK FOR MANAGEMENT AND REGULATION OF RADIOACTIVE WASTE AND DECOMMISSIONING 1.1 National framework 1.1.1 Overview of national policy 1.1.1.1 National infrastructure At national level the Swedish people are represented by the Riksdag (Swedish parliament) which has legislative powers. Proposals for new laws are presented by the Government which also implements decisions taken by the Riksdag. The Government is assisted in its work by the Government Offices, comprising a number of ministries, and some 300 central government agencies and public administrations. The primary function of these bodies is to implement the decisions taken by the Riksdag and Government. The government agencies have an autonomous status, i.e. they operate on their own responsibility but in accordance with preconditions in appropriations directives and ordinances decided by the Government. The appropriations directives set out, among other things, the goals an agency is to reach in its operations, how much money the authority has at its disposal and how the money is to be distributed between its different activities. The ordinances contain various general administrative provisions concerning how the agencies are to carry out their work. SSM operates under the auspices of the Ministry of the Environment. 1.1.1.2 Basis for spent fuel and radioactive waste management Principles for the management of spent fuel and radioactive waste have evolved over the years and have been discussed by the Swedish parliament. The allocation of responsibilities is reflected in the Swedish legislation, and is further described in section 2.
[Show full text]
Methodology to Manage Material and Waste from Nuclear Decommissioning Waste Management & Decommissioning Working Group
Methodology to Manage Material and Waste from Nuclear Decommissioning Waste Management & Decommissioning Working Group Methodology to Manage Material and Waste from Nuclear Decommissioning Waste Management & Decommissioning Working Group, World Nuclear Association Title: Methodology to Manage Material and Waste from Nuclear Decommissioning Produced by: World Nuclear Association Published: February 2019 Report No. 2019/001 Cover image: Yankee Atomic Electric Company © 2019 World Nuclear Association. Registered in England and Wales, company number 01215741 This report reflects the views of industry experts but does not necessarily represent those of the World Nuclear Association’s individual member organisations. Contents List of Figures & Tables vi Executive Summary vii Preface ix Chapter 1: Introduction 1 Chapter 2: Decommissioning Strategies 3 2.1 Introduction 4 2.2 External influences 4 2.3 Operator influences 5 2.4 Decommissioning strategy options 9 2.5 Influence of plant end state on decommissioning strategy 10 Box: Definition of ‘end state’ 11 2.6 Decommissioning planning 13 Chapter 3: Inventories 17 3.1 Introduction 18 3.2 Influence of inventory on materials management 19 3.3 Inventory types 20 3.3.1 Physical inventory 21 3.3.2 Radiological inventory 22 Box: Activated and contaminated equipment and structures 24 Box: European Union radioactive waste inventory 26 3.3.3. Chemical and biological inventory 28 Chapter 4: Waste Routing 29 4.1 Introduction 30 4.2 Influence of decommissioning strategy on waste route 31 4.3 Influence of inventory
[Show full text]