DOCSLIB.ORG

AAAFM-UCLA, 2019 August Aug 19-22, 2019, UCLA Prof. Yi

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
AAAFM-UCLA, 2019 August Aug 19-22, 2019, UCLA Prof. Yi AAAFM-UCLA, 2019 August Aug 19-22, 2019, UCLA Prof. Yi Cui H-Index (Google Scholar): 166 Department of Materials Science and Engineering, Stanford University Yi Cui went to University of Science and Technology of China (USTC), where he received a Bachelor’s degree in Chemistry in 1998. He attended graduate school from 1998 to 2002 at Harvard University, where he worked under supervision of Professor Charles M. Lieber. His Ph.D thesis concerned semiconductor nanowires for nanotechnology including synthesis, nanoelectroncis and nanosensor applications. After that, he went on to work as a Miller Postdoctoral Fellow with Professor Paul Alivisatos at University of California, Berkeley. His postdoctoral work was mainly on electronics and assembly using colloidal nanocrystals. In 2005 he became an Assistant Professor in Department of Materials Science and Engineering at Stanford University. In 2010 he was promoted to an Associate Professor with tenure and named as David Filo and Jerry Yang Faculty Scholar. In 2010, he was promoted to be a Full Professor. In 2011, he started a joint appointment in Photon Science Faculty, SLAC National Accelerator Laboratory. His current research is on nanomaterials for energy storage, photovotalics, topological insulators, biology and environment. He is a highly proliferate materials scientist and has published ~330 research papers, filed more than 40 patent applications and give ~300 plenary/keynote/invited talks. His works have generated a very large impact and he is among top most cited scientists in the world (Google Scholar, H-index 123). In 2014, he was ranked NO.1 in Materials Science by Thomson Reuters as “The World’s Most Influential Scientific Minds”. He is an Associate Editor of Nano Letters. He is a Co-Director of the Bay Area Photovoltaics Consortium and a Co-Director of Battery 500 Consortium. He founded Amprius Inc. in 2008, a company to commercialize the high-energy battery technology. Now the high-energy batteries invented by him have started to be used in commercial market, which could potentially revolutionize portable electronics and transportation applications. In 2015, he and Professor Steve Chu co- founded 4C Air Inc., to commercialize their invented breakthrough technology to remove particle pollutants from the air. He has won numerous awards recognizing his scientific contributions in these research areas, including MRS Fellow (2016), MRS Fred Kavli Distinguished Lectureship in Nanoscience (2015), Fellow of Royal Society of Chemistry (2015), Small Young Innovator Award (2015), Resonate Award for Sustainability (2015), Blavatnik National Award Finalist (2015), Inorganic Chemistry Frontiers Award for Young Scientist (2015), Inaugural Schlumberger Chemistry Lectureship (University of Cambridge, 2015), Top 10 World Changing Ideas for His Work on Batteries to Capture Low-Grade Waste Heat (Scientific American, 2014), NO. 1 “Hottest Researchers of Today” in Materials Science (Thomas Reuters, 2014), Closs Lectureship (University of Chicago, 2014), Inaugural Nano Energy Award (2014), Bau Family Awards in Inorganic Chemistry (2014), Blavatnik National Award Finalist (2014), the IUPAC Distinguished Award for Novel Materials and Synthesis (2013), Scientist in Residence of University of Duisburg-Essen (2013), Next Power Visiting Chair Professorship (National Tsinghua University, 2013), the Wilson Prize (2011), the David Filo and Jerry Yang Faculty Scholar (2010), the Sloan Research Fellowship (2010), the Global Climate and Energy Project Distinguished Lecturer (2009), KAUST Investigator Award (2008), ONR Young Investigator Award (2008), MDV Innovators Award (2007), Terman Fellowship (2005), the Technology Review World Top Young Innovator Award (2004), Miller Research Fellowship (2003), Distinguished Graduate Student Award in Nanotechnology (Foresight Institute, 2002), Gold Medal of Graduate Student Award (Material Research Society, 2001). .
Load more

Recommended publications
  • Integration of Colloidal Nanocrystals Into Lithographically Patterned
    NANO LETTERS 2004 Integration of Colloidal Nanocrystals Vol. 4, No. 6 into Lithographically Patterned Devices 1093-1098 Yi Cui,†,‡ Mikael T. Bjo1rk,‡ J. Alexander Liddle,‡ Carsten So1nnichsen,‡ Benjamin Boussert,† and A. Paul Alivisatos*,†,‡ Department of Chemistry, UniVersity of California, Berkeley, California 94720, and Materials Sciences DiVision, Lawrence Berkeley National Laboratory, Berkeley, California 94720 Received April 5, 2004 ABSTRACT We report a facile method for reproducibly fabricating large-scale device arrays, suitable for nanoelectronics or nanophotonics, that incorporate a controlled number of sub-50-nm-diameter nanocrystals at lithographically defined precise locations on a chip and within a circuit. The interfacial capillary force present during the evaporation of a nanocrystal suspension forms the basis of the assembly mechnism. Our results demonstrate for the first time that macromolecule size particles down to 2-nm diameter and complex nanostructures such as nanotetrapods can be effectively organized by the capillary interaction. This approach integrates the merits of bottom-up solution-processed nanostructures with top-down lithographically prepared devices and has the potential to be scaled up to wafer size for a large number of functional nanoelectronics and nanophotonics applications. Colloidal nanostructures such as metal nanocrystals1,2 and silica particles have been successfully organized into litho- semiconductor quantum dots,3,4 nanorods,5 and nanotetra- graphically patterned templates18 by the capillary force, pods6 with precisely controlled sizes in the range of 1 to forming highly ordered structures, although the diameters 100 nm exhibit a range of behaviors distinct from those of of the particles are typically submicrometer. nanostructures fabricated by vacuum deposition or lithog- It is not obvious whether this approach can be effectively raphy and are promising building units for nanotechnology.
    [Show full text]
  • Download Call for Papers (Pdf)
    CALL FOR PAPERS THE 48th IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE June 20-25, 2021 Diplomat Beach Resort Miami-Ft. Lauderdale, Florida, USA Abstract deadline: January 25, 2021 On behalf of the Technical Program Committee, I am honored to invite you to submit an abstract on your latest achievements in photovoltaic (PV) research, development, applications, and impact to the 48th IEEE Photovoltaic Specialists Conference (PVSC-48). The PVSC-48 endeavors to cover the full spectrum of PV knowledge and innovation, from the basic science and engineering of materials, devices, and systems, to the examination of policy and markets and critical issues of social impact. PVSC aims to be a highly interactive and inclusive venue for everyone, from seasoned PV experts to entry-level professionals to students alike, providing a unique opportunity to meet, share, and discuss PV-related developments in a timely and influential forum. Please contribute to the PVSC's tradition as the premier international conference on PV science and technology and help usher in a solar-powered world! PVSC-48 brings back the traditional 12 Technical Areas, along with a slate of compelling Keynote and Plenary Speakers. Delivering our Keynote address will be Professor Yi Cui from Stanford University, presenting on “Metal-H2 Batteries for Large Scale Stationary Energy Storage.” Plenary Speakers thus far include Laura Miranda (Oxford PV), Joe Berry (NREL), Anna Fontcuberta i Morral (EPFL), Marika Edoff (Uppsala University), and Xiaoting Wang (Bloomberg New Energy Finance). The conference will also host several exciting cross-cutting themes and joint areas, including “Advanced Resource Management for 100% Renewable Electricity” and “Hybrid Tandem/Multijunction Solar Cells,” with additional topically relevant sessions and events in the works.
    [Show full text]
  • Views of SEI − Battery Materials in the TEM,28 32 Allowing for Atomic- Species and Their Role on Anode Stability
    Letter http://pubs.acs.org/journal/aelccp Resolving Nanoscopic and Mesoscopic Heterogeneity of Fluorinated Species in Battery Solid-Electrolyte Interphases by Cryogenic Electron Microscopy William Huang, Hansen Wang, David T. Boyle, Yuzhang Li, and Yi Cui* Cite This: ACS Energy Lett. 2020, 5, 1128−1135 Read Online ACCESS Metrics & More Article Recommendations *sı Supporting Information ABSTRACT: The stability of lithium batteries is tied to the physicochemical properties of the solid-electrolyte interphase (SEI). Owing to the difficulty in characterizing this sensitive interphase, the nanoscale distribution of SEI components is poorly understood. Here, we use cryogenic scanning transmission electron microscopy (cryo-STEM) to map the spatial distribution of SEI components across the metallic Li anode. We reveal that LiF, an SEI component widely believed to play an important role in battery passivation, is absent within the compact SEI film (∼15 nm); instead, LiF particles (100−400 nm) precipitate across the electrode surface. We term this larger length scale as the indirect SEI regime. On the basis of these observations, we conclude that LiF cannot be a dominant contribution to anode passivation nor does it influence Li+ transport across the compact SEI film. We refine the traditional SEI structure derived from ensemble-averaged characterizations and nuance the role of SEI components on battery performance. − ithium (Li)-based batteries are critical to decarbonizing chemistry of the SEI.8 12 These methods offer high spectral transportation owing to their high energy densities.1 resolution and allow speciation of chemical components of the L Despite their importance, a fundamental understanding SEI, but in-plane spatial resolution is limited to the micrometer of all the structures within the battery and their function scale.
    [Show full text]
  • Molecular Design for Electrolyte Solvents Enabling Energy-Dense and Long-Cycling Lithium Metal Batteries
    ARTICLES https://doi.org/10.1038/s41560-020-0634-5 Molecular design for electrolyte solvents enabling energy-dense and long-cycling lithium metal batteries Zhiao Yu 1,2,6, Hansen Wang 3,6, Xian Kong 1, William Huang 3, Yuchi Tsao1,2,3, David G. Mackanic 1, Kecheng Wang3, Xinchang Wang4, Wenxiao Huang3, Snehashis Choudhury 1, Yu Zheng1,2, Chibueze V. Amanchukwu1, Samantha T. Hung 2, Yuting Ma1, Eder G. Lomeli3, Jian Qin 1, Yi Cui 3,5 ✉ and Zhenan Bao 1 ✉ Electrolyte engineering is critical for developing Li metal batteries. While recent works improved Li metal cyclability, a methodol- ogy for rational electrolyte design remains lacking. Herein, we propose a design strategy for electrolytes that enable anode-free Li metal batteries with single-solvent single-salt formations at standard concentrations. Rational incorporation of –CF2– units yields fluorinated 1,4-dimethoxylbutane as the electrolyte solvent. Paired with 1 M lithium bis(fluorosulfonyl)imide, this elec- trolyte possesses unique Li–F binding and high anion/solvent ratio in the solvation sheath, leading to excellent compatibility with both Li metal anodes (Coulombic efficiency ~ 99.52% and fast activation within five cycles) and high-voltage cathodes (~6 V stability). Fifty-μm-thick Li|NMC batteries retain 90% capacity after 420 cycles with an average Coulombic efficiency of 99.98%. Industrial anode-free pouch cells achieve ~325 Wh kg−1 single-cell energy density and 80% capacity retention after 100 cycles. Our design concept for electrolytes provides a promising path to high-energy, long-cycling Li metal batteries. i-ion batteries have made a great impact on society, recognized of fluorinated diluent molecules were further developed to form recently by the Nobel Prize in Chemistry1,2.
    [Show full text]
  • Three-Dimensional Analysis of Particle Distribution on Filter Layers
    pubs.acs.org/NanoLett Letter Three-Dimensional Analysis of Particle Distribution on Filter Layers inside N95 Respirators by Deep Learning Hye Ryoung Lee, Lei Liao, Wang Xiao, Arturas Vailionis, Antonio J. Ricco, Robin White, Yoshio Nishi, Wah Chiu, Steven Chu, and Yi Cui* Cite This: https://dx.doi.org/10.1021/acs.nanolett.0c04230 Read Online ACCESS Metrics & More Article Recommendations *sı Supporting Information ABSTRACT: The global COVID-19 pandemic has changed many aspects of daily lives. Wearing personal protective equipment, especially respirators (face masks), has become common for both the public and medical professionals, proving to be effective in preventing spread of the virus. Nevertheless, a detailed under- standing of respirator filtration-layer internal structures and their physical configurations is lacking. Here, we report three-dimen- sional (3D) internal analysis of N95 filtration layers via X-ray tomography. Using deep learning methods, we uncover how the distribution and diameters of fibers within these layers directly affect contaminant particle filtration. The average porosity of the filter layers is found to be 89.1%. Contaminants are more efficiently captured by denser fiber regions, with fibers <1.8 μm in diameter being particularly effective, presumably because of the stronger electric field gradient on smaller diameter fibers. This study provides critical information for further development of N95-type respirators that combine high efficiency with good breathability. KEYWORDS: COVID-19, N95 respirator, particle distribution, face mask, deep learning, X-ray tomography he zoonotic severe acute respiratory syndrome corona- the combined academic, government, and commercial science T virus 2 (SARS-CoV-2) that causes COVID-19 has led to community has focused major research effort on uncovering a global pandemic, raising significant societal challenges essential details of SARS-CoV-2 and COVID-19 in addition to worldwide in healthcare, economics, education, and gover- seeking vaccines and improved medical treatments.
    [Show full text]
  • Progress Reports
    U. S. Department of Energy 1000 Independence Avenue, S.W. Washington, D.C. 20585 Fiscal Year 2018: Second Quarter Progress Reports: Advanced Battery Materials Research (BMR) Program & Battery500 Consortium Program Released June 2018 for the period of January – March 2018 Approved by Tien Q. Duong, Program Manager Advanced Battery Materials Research Program & Battery500 Consortium Program Vehicle Technologies and Electrification Program Energy Efficiency and Renewable Energy Table of Contents TABLE OF CONTENTS A Message from the Advanced Battery Materials Research Program Manager ................................... xvi Advanced Battery Materials Research Program Task 1 – Liquid/Polymer Solid-State Electrolytes ................................................................................. 1 Task 1.1 – Advanced Lithium-Ion Battery Technology: High-Voltage Electrolyte (Joe Sunstrom, Ron Hendershot, and Alec Falzone, Daikin) ................................................... 3 Task 1.2 – Multi-Functional, Self-Healing Polyelectrolyte Gels for Long-Cycle-Life, High-Capacity Sulfur Cathodes in Lithium-Sulfur Batteries (Alex Jen and Jihui Yang, University of Washington) .............................................................. 5 Task 1.3 – Development of Ion-Conducting Inorganic Nanofibers and Polymers (Nianqiang (Nick) Wu, West Virginia University; Xiangwu Zhang, North Carolina State University) ....................................................................................................... 9 Task 1.4 – High Conductivity and
    [Show full text]
  • Yi Cui, Professor
    Yi Cui, Professor Department of Materials Science and Engineering, and (Courtesy) Department of Chemistry, Stanford University (Joint) Photon Science Faculty, SLAC National Accelerator Laboratory. Address: McCullough Building, Room 343, 476 Lomita Mall, Stanford, CA 94305 USA Email: [email protected], Phone: 650-723-4613, Fax: 650-725-4034 Research interest Energy: batteries, catalysts, solar cells, supercapacitors, Environment: water, air and soil cleaning technology Nanotechnology Two-dimensional layered materials Nanobiology H-Index (Google Scholar): 193 Professional Appointments 2016 Full Professor, Stanford University 2010-2016 Associate Professor with tenure, Stanford University 2012- Faculty by courtesy, Department of Chemistry, Stanford University 2011- Photon Science Faculty, SLAC National Accelerator Laboratory 2010-2014 David Filo and Jerry Yang Faculty Scholar 2005-2010 Assistant Professor, Stanford University 2003-2005 Miller Postdoctoral Fellow, University of California at Berkeley. Education Graduate: Ph.D in chemistry, with Professor Charles Lieber, Department of Chemistry and Chemical Biology, Harvard University, 2002 November. Undergraduate: B.S. in chemistry, with Professor Nengwu Zheng, Department of Chemistry, University of Science and Technology of China (USTC), 1998. Awards and Recognition 2019 International Automotive Lithium Battery Association's Research Award 2019 Electrochemical Society Battery Technology Award 2019 Nano Today Award 2019 Inaugural Dan Maydan Prize for Nanoscience 2018 Fellow of Electrochemical
    [Show full text]
  • A. Paul Alivisatos Charles M. Lieber Associate Editors
    CO-EDITORS: A. PAUL ALIVISATOS Department of Chemistry, University of California, Berkeley CHARLES M. LIEBER Department of Chemistry and Chemical Biology, Harvard University ASSOCIATE EDITORS Uri Banin Daniel Kohane Eran Rabani The Hebrew University of Jerusalem Boston Children’s Hospital University of California, Berkeley Yi Cui Chun Ning (Jeanie) Lau Angel Rubio Stanford University The Ohio State University Max Planck Institute for the Structure Klaus Ensslin Delia Milliron ETH Zürich The University of Texas at Austin and Dynamics of Matter Julia Greer Colin Nuckolls Joachim P. Spatz California Institute of Technology Columbia University Max Planck Institute for Metals Research Naomi J. Halas Hongkun Park and University of Heidelberg Rice University Harvard University Philip Kim Jiwoong Park Younan Xia Harvard University The University of Chicago Georgia Institute of Technology COORDINATING EDITOR MANAGING EDITOR EDITORIAL ASSISTANT Nicole S. Alivisatos Laura E. Fernandez Kathleen Ledyard [email protected] [email protected] [email protected] EDITORIAL ADVISORY BOARD Sangeeta Bhatia Robert S. Langer Nadrian C. Seeman Massachusetts Institute of Technology Massachusetts Institute of Technology New York University Edwin A. Chandross Helmuth Möhwald Samuel I. Stupp MaterialsChemistry LLC Max-Planck-Institut für Kolloid Northwestern University Jinwoo Cheon und Grenzflächenforschung Shouheng Sun Yonsei University Catherine J. Murphy Brown University Harold G. Craighead University of Illinois at Urbana-Champaign
    [Show full text]
  • Rafael Cui ACSNANO 2020.Pdf
    This article is made available via the ACS COVID-19 subset for unrestricted RESEARCH re-use and analyses in any form or by any means with acknowledgement of the original source. These permissions are granted for the duration of the World Health Organization (WHO) declaration of COVID-19 as a global pandemic. Article www.acsnano.org Decontamination of SARS-CoV‑2 and Other RNA Viruses from N95 Level Meltblown Polypropylene Fabric Using Heat under Different Humidities # # Rafael K. Campos, Jing Jin, Grace H. Rafael, Mervin Zhao, Lei Liao, Graham Simmons, Steven Chu, Scott C. Weaver,* Wah Chiu,* and Yi Cui* Cite This: https://dx.doi.org/10.1021/acsnano.0c06565 Read Online ACCESS Metrics & More Article Recommendations *sı Supporting Information ABSTRACT: In March of 2020, the World Health Organ- ization declared a pandemic of coronavirus disease 2019 (COVID-19), caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The pandemic led to a shortage of N95-grade filtering facepiece respirators (FFRs), especially surgical-grade N95 FFRs for protection of healthcare profes- sionals against airborne transmission of SARS-CoV-2. We and others have previously reported promising decontamination methods that may be applied to the recycling and reuse of FFRs. In this study we tested disinfection of three viruses, including SARS-CoV-2, dried on a piece of meltblown fabric, the principal component responsible for filtering of fine particles in N95- level FFRs, under a range of temperatures (60−95 °C) at ambient or 100% relative humidity (RH) in conjunction with filtration efficiency testing. We found that heat treatments of 75 °C for 30 min or 85 °C for 20 min at 100% RH resulted in efficient decontamination from the fabric of SARS-CoV-2, human coronavirus NL63 (HCoV-NL63), and another enveloped RNA virus, chikungunya virus vaccine strain 181/25 (CHIKV-181/25), without lowering the meltblown fabric’s filtration efficiency.
    [Show full text]
  • Erik C. Garnett Science Park 104, 1098XG, Amsterdam, Netherlands [email protected] +31 (0)20 754 7231 (Office) +31 (0)63 907 2396 (Cell)
    Garnett_CV - 1 Erik C. Garnett Science Park 104, 1098XG, Amsterdam, Netherlands [email protected] +31 (0)20 754 7231 (office) +31 (0)63 907 2396 (cell) EDUCATION Stanford University Postdoctoral Fellow, Sept. 2009-July ‘12 University of California, Berkeley Ph.D. in Chemistry, May 2009 University of Illinois, Urbana-Champaign B.S. in Chemistry, May 2004 RESEARCH EXPERIENCE Group Leader, FOM-AMOLF Institute, Amsterdam • Launched new research direction for AMOLF in solar energy conversion – first of 3 new faculty Dr. Mark Brongersma, Dr. Mike McGehee, Dr. Yi Cui groups, Stanford University – Postdoctoral Fellowship • Nanostructured inorganic, organic and hybrid tandem photovoltaics with photonic enhancement • Plasmonics for self-limited nanowelding and light trapping Dr. Peidong Yang group, University of California, Berkeley, CA – PhD student • Silicon nanowire synthesis, doping, and structural characterization • Nanowire transistor, solar cell and capacitor device fabrication and testing Dr. David Ginley group, National Renewable Energy Lab, Golden, CO – internship • Combinatorial corrosion cell (Summer 2003); Ink-jet printed PEDOT/PSS films (Summer 2004) Dr. Andrzej Wieckowski group, University of Illinois, Urbana-Champaign – internship • Analyzed Pt/Ru and Pt/Pd nanoparticle fuel cell catalyst activity via electrochemical techniques PUBLICATIONS (>7,700 citations; h-index=20 from Google Scholar) “Grain boundary effects on halide perovskite carrier diffusion length and lifetime” Haralds Abolins, Sarah Brittman, Gede Adhyaksa, Pim Veldhuizen, Ruud Schropp, Erik C. Garnett, in preparation “Reversible polarization effects on photoluminescence in purely inorganic and hybrid halide perovskite microcrystals” Parisa Khoram, Sarah Brittman, David Fenning, Erik Garnett, in preparation “Green’s function analytical calculations applied to nanowire optoelectronics” Eric Johlin, Sander A. Mann and Erik C.
    [Show full text]
  • Yi Cui Presentation
    Facial Masks during COVID-19: Homemaking, Disinfection and Imaging Prof. Yi Cui Department of Materials Science and Engineering, Stanford University Collaborators:SLAC National Accelerator Laboratory Stanford: Prof. Steven Chu, Prof Larry Chu, Prof. Wah Chiu, Dr. Amy Price 4C Air Team: Dr. Lei Liao, Mervin Zhao and others The DeMaND Team: Prof. May Chu (Colorado), Selcen Kilinc-Balci (CDC/NIOSH), Brian H. Harcourt (CDC) Ying Ling Lin (WHO) and many others Virus sizes：20 nm to 400 nm Virus Structures SARS-COV-2 （～150nm） • related to SARS and MERS • spread via close contact • infect lung 100 nm cells • cause Influenza virus pneumonia Image adapted from Google After seconds (depending on humidity) , droplets evaporate in air to become aerosols (<1 mm), which stay in air for days. Indoor: wearing masks Outdoor: If crowded, wearing masks https://www.medrxiv.org/content/10.1101/2020.04.01.20050443v1 Filtration materials in mask 1）Micronsize fibers（1-10 µm ) forming 3D structures with porosity~90% 2）Need electric static charge to increase particle capture efficiency Spunbond fibers: 10-40 µm diameter Meltblown fibers: 1-10 µm http://hyperphysics.phy- diameter astr.gsu.edu/hbase/electric/elecyl.html Homemade masks 4C Air, Inc. Testing Report Brand: Unknown 4C Air, Inc. Testing Report Product: Hand-made face mask Brand: Unknown Specified grade: NA Product: Hand-made face mask Community-made masks Testing Date: Apr 7th, 2020 Specified grade: NA From Prof. May Chu PrToesdutingct imDate:ages: Apr 7th, 2020 Testing Data: Product images: Initial Sample # Efficiency (%) Pressure drop (Pa) 1 49.72 88.00 2 43.66 73.00 3 44.02 89.00 4 46.54 85.00 5 47.29 88.00 6 43.66 95.00 After triboelectric charging Efficiency (%) Pressure drop (Pa) Sample Description: 1 52.18 87.00 Sample Description: The hand-made masks appear to be a four - layer structure comprised of woven – spunbond – spunbond - 2 51.65 85.00 The hand-made masks appear to be a four - layer structure comprised of woven – spunbond – spunbond - woven.
    [Show full text]
  • Lindsey Hanson Trinity College, Department of Chemistry 300 Summit Street [email protected] Hartford, CT 06106 860-297-5267
    Lindsey Hanson Trinity College, Department of Chemistry 300 Summit Street [email protected] Hartford, CT 06106 860-297-5267 EDUCATION Stanford University, Stanford, California September 2008 – June 2014 PhD in Chemistry Duke University, Durham, North Carolina August 2003 – May 2007 Bachelor of Science with Distinction in Chemistry, minor in Slavic Languages and Literature PROFESSIONAL APPOINTMENTS Assistant Professor of Chemistry, Trinity College, Hartford, CT July 2017 – Present Postdoctoral Scholar, Lawrence Berkeley National Laboratory September 2014 – June 2017 Postdoctoral Scholar, Stanford University July 2014 – August 2014 RESEARCH EXPERIENCE Postdoctoral Research, Lawrence Berkeley National Laboratory September 2014 – June 2017 Adviser: Professor A. Paul Alivisatos Investigated the effect of pressure on optical properties of fluorescent nanoparticles. Graduate Research, Stanford University. September 2008 – August 2014 Adviser: Professor Bianxiao Cui Explored the response of living cells to vertically aligned nanopillars and the use of those nanostructures as optical, electrical, and mechanical probes to manipulate and study cellular function. Research Assistant, Johns Hopkins University. August 2007 – August 2008 Supervisor: Dr. Daniel Judge. Investigated patterns of inheritance in arrhythmogenic right ventricular dysplasia (ARVD). Undergraduate Thesis, Gordon Research Fellowship, Duke University . January 2006 – May 2007 Adviser: Professor David Beratan Performed molecular dynamics simulations of the human SRY protein-DNA complex. RESEARCH INTERESTS My research interests lie at the intersection of physical chemistry, biophysics and materials science. In my research group, we investigate the effect of mechanical forces on the optical properties of nanoscale materials. We then use materials that are capable of converting mechanical forces into optical signals to study the effect of nanoscale forces and topography on biological systems.
    [Show full text]