DOCSLIB.ORG

Our Partners M: 617-659-1449 CNC CABINETRY

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Our Partners M: 617-659-1449 CNC CABINETRY 275 Salem Street Suite 3 Woburn, MA 01801 [email protected] www.617homeimprovement.com Our Partners m: 617-659-1449 CNC CABINETRY Create the kitchen of your dreams with these beautiful all wood cabinets from CNC Cabinetry. Select the cabinet style that speaks to you to design the kitchen you desire. Enjoy the many versatile styles that CNC Cabinetry has to offer. There is something to offer for the traditional lover and the one who seeks something modern. Choose from the many assorted styles, colors and species 2 Classic Collection Door Styles/Specifications 1 Back panel — 1/4” back panel with 1 3/4” x 4” supporting braces top and bottom, constructed with wood dowels glued and clamped for ensured security. 2 End panel — ¾” thick, multi-core plywood sides Constructed with wood dowels glued and clamped for ensured security. 3 3 Shelves — ¾” thick, plywood; fully 2 adjustable 4 Hinges — Heavy duty steel concealed hinge, adjustable with soft-close mechanism 4 Classic Collection Door Styles/Specifications 5 Back panel — ¼” back panel with ¾”x4” supporting braces top and bottom, constructed with wood dowels glued and clamped. 6 End panel — ¾” thick, multi-core plywood 1 Back panel — 1/4” back panel with sides Constructed with wood dowels glued 1 3/4” x 4” supporting braces top and bottom,5 8 and clamped. constructed with wood dowels glued and Drawers — Double wall metal drawer with clamped for ensured security. 7 plywood bottom. 2 End panel — ¾” thick, multi-core plywood Glides — Full extension glides, with soft sides Constructed with wood dowels glued 7 8 closing feature. and clamped for ensured security. 3 Shelves — ¾” thick, full depth plywood; Classic 9 3 Shelves — ¾” thick, plywood; fully fully adjustable. 2 adjustable 9 Hinges — Heavy duty steel concealed 4 Hinges — Heavy duty steel concealed 10 hinge, adjustable with soft-close mechanism Collection hinge, adjustable with soft-close mechanism 4 11 Toe Kick — 4” Toe kick with 3” inset on all standard base and vanity cabinets. White 30½” 10 toe kick is standard. 6 Cabinet boxes are white edge banded with white interior and exterior. On diagonal and corner cabinets,matching edgebanding will be applied vertically 5 Back panel — ¼” back panel with ¾”x4” supporting braces top and bottom, Classic cabinets are only available assembled. constructed with wood dowels glued and 11 Matrix clamped.Milano Alvic doors come standard with Blum hinges 6 End panel — ¾” thick, multi-core plywood sides Constructed with wood dowels glued Today’s contemporary design trends focus heavily on the depth &5 colors of real8 wood. and clamped.This full overlay, contemporary style slab door is very versatile. Available in a high gloss 119 7 Drawers — Double wall metal drawer with Matrix gives you that richness, but with a longer lifespan. Available in 2 stocked colors, let plywoodfinish bottom. that looks very trendy in a kitchen setting, and it is easy to clean and durable enough Glides — Full extension glides, with soft 7 8 Matrix bring your modern designs to life. closingfor feature. the laundry room 9 Shelves — ¾” thick, full depth plywood; fully adjustable. Hinges — Heavy duty steel concealed Overlay: Full Overlay I Panel: Slab I Species: Textured Laminate 9 10 Overlay: Full Overlay I Panel: Slab I Species: Thermofoil hinge, adjustable with soft-close mechanism 11 Toe Kick — 4” Toe kick with 3” inset on all standard base and vanity cabinets. White 30½” 10 toe kick is standard. 6 Cabinet boxes are white edge banded with white interior and exterior. On diagonal and corner cabinets,matching edgebanding will be applied vertically Classic cabinets are only available assembled. 11 Alvic doors come standard with Blum hinges 119 Silver Greystone White Slate Specification Specification Door: A full overlay low pressure laminate flat panel door with deep textured finish. Door: A full overlay thermofoil high gloss finish MDF flat panel door. Box: Box: Back: ¼” back panel with ¾”x4” supporting braces top and bottom, constructed with wood Back: ¼” back panel with ¾”x4” supporting braces top and bottom, constructed with wood dowels glued and clamped. dowels glued and clamped. End Panels: ¾” thick, plywood sides constructed with wood dowels glued and clamped. End Panels: ¾” thick, plywood sides constructed with wood dowels glued and clamped. Hinges: Heavy duty steel concealed adjustable hinge, with soft-close mechanism. Hinges: Heavy duty steel concealed adjustable hinge, with soft-close mechanism. Shelves: ¾” thick, full depth plywood; fully adjustable. Shelves: ¾” thick, full depth plywood; fully adjustable. Toe Kick: 4” toe kick with 3” inset on all standard base and vanity cabinets. Toe Kick: 4” toe kick with 3” inset on all standard base and vanity cabinets. 3 Classic Collection Door Styles/Specifications 1 Back panel — 1/4” back panel with 1 3/4” x 4” supporting braces top and bottom, constructed with wood dowels glued and clamped for ensured security. 2 End panel — ¾” thick, multi-core plywood sides Constructed with wood dowels glued and clamped for ensured security. 3 3 Shelves — ¾” thick, plywood; fully 2 adjustable 4 Hinges — Heavy duty steel concealed hinge, adjustable with soft-close mechanism 4 Classic Collection Door Styles/Specifications 5 Back panel — ¼” back panel with ¾”x4” supporting braces top and bottom, constructed with wood dowels glued and clamped. 6 End panel — ¾” thick, multi-core plywood 1 Back panel — 1/4” back panel with sides ConstructedPark with wood Ave dowels glued 1 3/4” x 4” supporting5 braces top and8 bottom, and clamped. constructed with wood dowels glued and 7 Drawers — ParkDouble wall Avenue-the metal drawer with name itself signifies clamped for ensured security. plywood bottom. 2 End panel — ¾” thick, multi-core plywood Glides — Full extension glides, with soft 7 8 sophistication and elegance. Both the door sides Constructed with wood dowels glued closing feature. and clamped for ensured security. 3 9 Shelves — ¾” thick, full depth plywood; 3 Shelves — ¾” thick, plywood; fully fully adjustable.and drawer front in this style is 5-piece miter 2 adjustable Hinges — Heavy duty steel concealed Concord 9 4 Hinges — Heavy duty steel concealed 10 hinge, adjustable with soft-close mechanism hinge, adjustable with soft-close mechanism constructed, with a full overlay. Furniture 4 11 Toe Kick — 4” Toe kick with 3” inset on all standard base and vanity cabinets. White 10 Collection 30½” toe kick is standard.inspired, the Park Avenue door has the 6 Cabinet boxes are white edge banded with white interior and exterior.appearance of interior moldings. Together, On diagonal and corner cabinets,matching Back panel — ¼” back panel with edgebanding will be applied vertically 5 they will attract anyone looking for a richly crafted door, at an ¾”x4” supporting braces top and bottom, Classic cabinets are only available assembled. constructed with wood dowels11 glued and clamped. Alvic doors comeaffordable standard with Blum hinges price. 6 End panel — ¾” thick, multi-core plywood Richmond sides Constructed with wood dowels glued 5 8 and clamped. Overlay: Full Overlay I Panel: Raised Panels I Species: Birch 119Drawers — Double wall metal drawer with Richmond is an elegant, mitered flat panel door with a beautiful7 accent molding; it plywood bottom. Glides — Full extension glides, with soft 7 8 is available in a warm light grey stain and a white painted finish.closing feature. A perfect fit for any 9 Shelves — ¾” thick, full depth plywood; transitional style kitchen. fully adjustable. Hinges — Heavy duty steel concealed 9 10 hinge, adjustable with soft-close mechanism Overlay: Full Overlay I Panel: Shaker I Species: Birch 11 Toe Kick — 4” Toe kick with 3” inset on all standard base and vanity cabinets. White 30½” 10 toe kick is standard. 6 Cabinet boxes are white edge banded with white interior and exterior. On diagonal and corner cabinets,matching Specification edgebanding will be applied vertically Classic cabinets are only available assembled. 11 Door: A full overlay 5 piece Alvic doors come standard with Blum hinges solid wood with a flat MDF 119 verneer center panel. White Ocean Blue Miteredconstruction. Specification Door: Full overlay 5 pieces solid wood with a flat drawer face and raised panel door. MDF Stone veneer center panel. Mitered construction. Box: Box: Back: Full ½” plywood back, installed with our interlock system. Screwed to top and Back: Full ½” plywood back, installed with our interlock system. Screwed to top and bottom. bottom. Side Panels: ½” plywood sides. Light maple veneer interior and matching finished exterior. Side Panels: ½” plywood sides. Light maple veneer interior and matching finished Frame: ¾” thick, 1½” wide, kiln-dried solid hardwood. Frame and sides are installed with our exterior. interlocking system, which ensures easy assembly and inseparable strength. Frame: ¾” thick, 1½” wide, kiln-dried solid hardwood. Frame and sides are installed with Hinges: Heavy duty steel concealed hinge, adjustable with soft-close mechanism. our interlocking system, which ensures easy assembly and inseparable strength. Shelves: ¾ thick, plywood; fully adjustable. Hinges: Heavy duty steel concealed hinge, adjustable with soft-close mechanism. Toe Kick: 4½“ toe kick with 3″ inset on all standard base and vanity cabinets. Shelves: ¾ thick, plywood; fully adjustable. Toe Kick: 4½“ toe kick with 3″ inset on all standard base and vanity cabinets. Drawer: ¾” solid wood, dovetail construction. With high-quality stainless steel full extension undermount glide. With soft-close
Load more

Recommended publications
  • View the Door Catalog
    Roy’s Wood Products OVER 45 YEARS OF CUSTOM WOODWORKING A passion for quality and almost 50 years of custom woodworking drives Roy’s Wood Products, RWP, to manufacture some of the best wood products in the industry. Our grandfather Roy Brazell, Sr., after serving in WWII, started building cabinets and other products for local craftsmen and contractors. His son, Roy Brazell, Jr. continued to grow the business by focusing on what the customer needed and working hard for timely delivery. As a result of hard work, attention to quality, and the blessings of our Lord and Savior Jesus Christ, RWP has grown into what it is today. We are looking forward to providing you with the custom cabinet doors, custom mouldings, hardwood flooring or any other products you might find in the pages of this catalog. Thank you for your business. Cherry Roman Eyebrow Roman Arch Square Raised Panel DFT-01-202-110 011-01-202-110 005-01-202-110 003-01-202-110 401-00-000-110 402-00-000-110 Maple Double American American Arch Square Raised Panel DFT-03-203-113 015-03-203-113 010-03-203-113 003-03-203-113 401-00-000-113 403-00-000-113 Hickory PICTURED: Cathedral Eyebrow Cathedral Arch Square Raised Panel DFT-01-209-109 Square Raised Panel Door 003-01-202-110 008-01-209-109 004-01-209-109 003-01-209-109 401-00-000-109 Solid Raised Panel Drawer Front 502-00-000-110 509-00-000-109 In Cherry with stain 4 5 Birch DFT-01-FPL-110 Glass Four Lite Flat Roman Classic Flat 409-00-000-110 003-03-G04-111 905-01-FPL-110 903-01-FPL-110 401-00-000-110 Knotty Pine DFT-03-FPL-107 Flat
    [Show full text]
  • Frame-And-Panel Doors Made Easy
    Frame-and-Panel Doors Made Easy Cope-and-stick router bits are quick but tricky. Here’s how to get perfect results BY MICHAEL PEKOVICH Photos, this page: Michael Pekovich; facing page: John Tetreault COPYRIGHT 2007 by The Taunton Press, Inc. Copying and distribution of this article is not permitted. Bit types his past summer, during the remodeling of my kitchen, I was faced with the task of making 31 Tcabinet doors. I needed speed and simplicity, so I broke out my router table and a set of cope-and- stick router bits. These bit combinations allow you to rout door frames quickly, in two steps. The first bit routs a profile and panel groove on the inside edge of all the Doors Made Easy TWO-BIT frame parts. The second bit is a mirror image of the SET first, routing a coped profile and a stub tenon on the ends of the frame rails. What you create is not a traditional mortise-and- tenon joint. But done right, it gives you a cabinet door that’s just as strong. The key is to use a flat panel of plywood Router bits for door or medium-density fiberboard (MDF) that’s glued in place— not a raised panel, which is designed to float. All in all, I was frames are referred to in able to build all 31 doors in the course of a weekend, from woodworking catalogs as “cope and stick” or “rail milling lumber to finish sanding. and stile” bits. Their function is to rout a profile and a panel groove on Different types of cope-and-stick bits are available, with an the inside edge of the frame parts and to cope the ends of the array of profiles from simple thumbnails to more ornate ogees rails to fit that profiled edge.
    [Show full text]
  • DOOR and DRAWER STYLE SELECTION Choosing Your Door and Drawer Style
    DOOR AND DRAWER STYLE SELECTION Choosing Your Door And Drawer Style The one thing that will affect the look of your kitchen perhaps more than anything else is the style of your cabinet door and drawer fronts. And there are many styles available to you. Traditional cope and stick, slab, or mitered construction. Raised or flat (recessed) panels. Ogee, square, or regular beads. And more…So many choices! I’d like to take a moment to help parse out the details. We’ll look at the different types of construction, the options for material, edge, bead, and panel profiles, and some other door and drawer choices that may interest you. Construction There are three main types of door construction: 1. Traditional (also known as mortised or cope and stick) 2. Mitered 3. Slab Traditional Doors A door or drawer style called “Traditional” is made of five pieces, which is why they are sometimes called “5-Piece doors” or “5-Piece drawers”. Think of this type of door as a picture frame that has a top and bottom rail (the horizontal members of the frame), a left and right stile (the vertical members of the frame) that together house a center panel (which is where the glass would be in a picture frame). For the frame, you can choose the style of the outside edge profile and the framing bead, which is the inside edge profile. Further, you can choose either a raised or flat center panel. If you choose a raised panel, then you will have to decide on the raised panel profiles from a number of options.
    [Show full text]
  • Rails & Stiles
    Rails & Stiles MLCS is proud to offer an extensive variety of bits to make rail and All varieties stile frames for doors. These frames use “cope and stick” joints at the corners, which give a strong tongue and groove joint and a mitered moulding look on the inside detail. A groove or rabbet is also created at the same time to hold a raised, flat, or glass panel. Router: A reliable quality router will cost over $120 and be worth every penny. MLCS carries bit sets for either 1/4” or 1/2” collets. The 1/2” collet is more versatile, because it accepts a wider variety of bits including the larger 3 1/2” Raised Panel cutters. 1-1/2 to 2 HP is powerful enough for most work. In all cases, we strongly recommend being able to slow the speed of the router, either with the MLCS #9000 Router Speed Control or one that is built into your router. This will enable you to better control the workpiece and minimize burning on the more resinous woods such as cherry or maple. Speed control is especially important on less expensive routers, as bits can vibrate excessively at full speed. Finally, the router should be table-mounted. A sturdy, flat router table and a solid squared fence are important for producing quality doors. Routing rails and stiles freehand is NOT recommended. Choosing Your Materials Rails and Stiles : Wood for your rails and stiles should be straight- grained and knot free. Ends and edges should be square to the face of the wood.
    [Show full text]
  • Cope and Stick Inside Edge Profiles IE1 IE2 IE3 IE4 IE6 IE7 IE5 Cope
    Cope and Stick Inside Edge Profiles IE1 IE2 IE3 IE4 IE5 IE6 IE7 IE9 IE13 IE14 Cope and Stick, Combination Frame and Veneer Outside Edge Profiles 1/8” OE1 OE2 OE3 OE4 3/8” OE5 OE6 OE7 OE8 OE9 OE11 OE13 OE14 1/4” OE15 OE20 OE21 1/8” OEABD* 1.5mm EB 3mm EB *Additional sq. ft. or per piece Veneer Doors Veneer Doors charge applies. OEABD is available only on slab drawer fronts. Orders and Information: 512.352.6355 or 866.585.7623 Fax: 512.853.4077 © 2021 TaylorCraft Cabinet Door Company, LP Profiles are shown smaller than actual size. Panel Profiles (Noted panel reveal is approximate and can vary due to expansion/contraction) 5/16” 1-1/8” 1-5/16” RP1 RP3 RP4 3/4” 1” 1-3/16” RP12 RP13 RP5* 1” 1-1/2” RP6 RP7 1-5/16” 1-5/16” 1-1/8” RP9 RP11 RP20 1-1/16” 1-1/16” RP14 RP15 FP3/8"ǂ FP3/8” VG* FP3/8" BD* (MDF Core) (Solid Wood) (Solid Wood) 1-3/8” 1-3/4” FP1/4"ǂ » » (MDF Core) RPAM1 RPAM2 »RPAM1 and RPAM2 are for use on Inside Applied Molding Doors. Reveal varies depending on which applied molding is used. *Additional charge applies for RP5, v-groove and beaded v-groove panels. Cathedral and eyebrow arch doors are not available with RP5. *FP3/8” VG and FP3/8” BD grooves and beads are centered on panel and are 2” apart on center. These profiles are solid wood panels so solid, raised panel minimums apply.
    [Show full text]
  • Making Stub-Tenon Doors
    Making Stub-tenon Doors The stub-tenon joint will never be the super- hero of your joinery arsenal because it doesnʼt have the stuff necessary to be a strong joint. The mating parts are short (hence the “stub” moniker) and itʼs housed on only two sides: the face cheeks of the tenon. There is sufficient glue surface, but the cross-grain orientation compromises the glue joint. In the pantheon of woodworking joints, the stub-tenon joint may be more accurately described as a 90-pound weakling. But even so, this can be sufficient for smaller, lightweight doors that donʼt take a lot of abuse. For example, you wouldnʼt choose this joint for kitchen cabinet doors or built-ins for the kidsʼ playroom. But itʼs OK to use a stub-tenon door for a vanity cabinet or for a project thatʼs built as much for looks as it is for service. Once a door weighs more than four or five pounds, or is larger than 18" x 24", you must abandon the stub-tenon joint for a more substantial one. Mortise-and-tenon construction, dowels, loose tenons and even biscuit joints are superior choices for larger, heavier doors. So why use a stub-tenon joint? Well, itʼs easy to make because it requires a minimal amount of setup time regardless of the method you choose to cut the joint. Itʼs usually cut with a router in a table or on the table saw using a stack dado set. The ease of setup is because the same groove thatʼs cut to receive the panel doubles as the groove for the stub tenon.
    [Show full text]
  • The ABC's of Panel Door Construction
    The ABC’s of panel door construction In our step-by-step example of panel door construction, we used the following: - CMT Rail & Stile set (item #891.502.11) - CMT Reverse Glue Joint (item #855.501.11) R tile - pre-cut to length stiles - 19mm thick x 57mm wide ail S Panel - pre-cut to length rails - 19mm thick x 57mm wide le - panel - 16mm thick Sti - scrap stock The CMT Rail & Stile set was designed ideally for the Panel construction of panel doors from 19mm thick stock, however any variation of size up to 22mm thick can be le Rail used. Remember to adjust your measurements and R Sti cutting depths according to the wood thickness you ail use. ILLUSTRATION A ILLUSTRATION B STOCK STOCK ROUTER TABLE ROUTER TABLE MILLING THE RAILS AND STILES First make trial cuts of the cope profile (rail) and the stick profile (stile) in scrap stock and check the accuracy of the joint. This is extremely important when working at maximum thickness (22mm). Make sure your stock is flat and cut straight with square edges. Using the CMT Stile Bit shown in illustration A, place the stock front face-down on the router table and mill the stick profile in the stile and rail pieces. To mill the rails, use the CMT Rail Bit shown in illustration A, position the rails face-down on the router table and mill the cope profile in the ends. If you are milling cope and stick profiles before cutting the rails and sti- les to length, be sure to make the proper calculations before cutting the rails.
    [Show full text]
  • Step-By-Step Raised Panel Door Construction
    Step-By-Step Raised Panel Door Construction Use these instructions with any of CMT’s Kitchen Sets, or with the 800.512.11 - 800.513.11 Raised Panel or Rail and Stile Sets sold individually. 800.514.11 - 800.516.11 In our step by step example of panel door construction, we used the following: - CMT Rail & Stile set (item # 891.502.11) - Raised panel bit (item # 890.502.11) - CMT Reverse Glue Joint (item #855.501.11 not included) - pre-cut stiles - 3/4” thick x 2-7/16” wide - pre-cut rails - 3/4” thick x 2-7/16” wide - panel - 3/4” thick - scrap stock The CMT Rail & Stile set was designed ideally for the construction of panel doors from 3/4” thick stock, however any variation of size up to 7/8” thick can be used. Remember to adjust your measurements and cutting depths according to the wood thickness you use. MILLING THE RAILS AND STILES process. This assures you will FENCE First make trial cuts of the cope profile (rail) and the stick profile (stile) have the best side of your in scrap stock and check the accuracy of the joint. This is extremely stock as a front face. If a third important when working at maximum thickness (7/8”). Make sure your panel is required, mill one cut stock is flat and cut straight with square edges. Using the CMT Stile Bit edge of the piece as instructed above, turn the piece over and shown in Illustration 1, place the stock front face side down on the ROUTER TABLE router table and mill the stick profile in the stile and rail pieces.
    [Show full text]
  • Fundamentals
    fundamentals hat began years ago as a simple homemade Getting started device to hold a router has evolved into a common, and often indispensable, piece of shop equipment. Regardless of its level of with router tables sophistication, when set up correctly, a router in a table is frequently simpler and more stable GET THE MOST FROM THIS to use than a handheld router and, in many cases, will increase theW accuracy of your work. I’ll explain what you’ll want from WORKSHOP WORKHORSE a router table, the basics of using them, and the tasks at which BY BOB VAN DYKE they excel. Types of tables A router table can be anything from a piece of MDF with a router screwed to it and a board clamped across the top as a fence, to a benchtop model, to a complex, freestanding piece of expensive equipment. Set up and used correctly, they all accomplish the same thing and work the same way. 24 FINE WOODWORKING Photos: Barry NM Dima; drawings: John Tetreault COPYRIGHT 2018 by The Taunton Press, Inc. Copying and distribution of this article is not permitted. • Fine Woodworking #270 - Sep/Oct 2018 C ENTER for F URNITURE Now in store C RAFTSMANSHIP Our 100% washed chino Teaching Creative Excellence Fine Woodworking hat is soft and strong, with an adjustable strap. Made in the USA Rockport, Maine Shop TauntonStore.com/gear www.woodschool.org QUALITY WOODWORKING TOOLS • SUPPLIES • ADVICE® When Roughing Out … Or Adding Details Liogier Tools Give A Professional Touch Liogier Rasps and Rifflers are meticulously handcrafted from carefully selected steel cast in France using a decades-old process proven to produce thousands of perfectly hand stitched teeth capable of handling many shaping tasks, from roughing out a leg to delicate fine-tuning.
    [Show full text]
  • (12) United States Patent (10) Patent No.: US 8,209,927 B2 Cottier Et Al
    US008209927B2 (12) United States Patent (10) Patent No.: US 8,209,927 B2 Cottier et al. (45) Date of Patent: Jul. 3, 2012 (54) STRUCTURAL FIBER CEMENT BUILDING 37.2%J. w A 8. 3. itygeberg et al.1 MATERLALS 2,377,484 A 6, 1945 Elmendof 2,676,892 A 4, 1954 McLaughlin (75) Inventors: John Sydney Cottier, Oatley (AU); 2,797,201 A 6, 1957 Veatch December Rose Cowen, Yucaipa, CA 2.978,340 A 4, 1961 Veatch et al. (US); Remi Dunoyer, Randwick (AU); 39. A 233 Malik Steven Duselis, Baulkham Hills (AU); 3.264,135 A 8, 1966 Sin James Albert Gleeson, North Curl Curl 3.35 14 14 A 5, 1967 Veli (AU); Amitabha Kumar, Claremont, 3,360,392 A 12/1967 Modet al. CA (US) 3,365,315. A 1/1968 Becket al. 3,501,324 A 3, 1970 Kubo ck (73) Assignee: James Hardie Technology Limited, SE A 3229 East . 52,125.5 Dublin (IE) 3,748,100 A 7, 1973 ForSeth (*) Notice: Subject to any disclaimer, the term of this (Continued) patent is extended or adjusted under 35 FOREIGN PATENT DOCUMENTS U.S.C. 154(b) by 928 days. AR 2O6788 A1 8/1976 (21) Appl. No.: 11/961,749 (Continued) (22) Filed: Dec. 20, 2007 OTHER PUBLICATIONS O O Skaggs, C.B. et al "Applications of Rheological Modifiers and (65) Prior Publication Data Superplasticizers in Cementitious System” American Concrete Insti US 2009/0162602 A1 Jun. 25, 2009 tute SP (1994), SP-148, 189-207. (Continued) (51) Int. Cl. E04C I/00 (2006.01) Primary Examiner — Basil Katcheves (52) U.S.
    [Show full text]
  • Rails & Stiles
    Rails & Stiles All varieties MLCS is proud to offer an extensive variety of bits to make rail and stile frames for doors. These frames use “cope and stick” joints at the corners, which give a strong tongue and groove joint and a mitered molding look on the inside detail. A groove or rabbet is also created at the same time to hold a raised, flat, or glass panel. Router: A reliable quality router will cost over $120 and be worth every penny. MLCS carries bit sets for either 1/4” or 1/2” collets. The 1/2” collet is more versatile, because it accepts a wider variety of bits, including the larger 3 1/2” Raised Panel cutters. 1-1/2 to 2 HP is powerful enough for most work. In all cases, we strongly recommend being able to slow the speed of the router, either with the MLCS #9400 or #9410 Router Speed Control or one that is built into your router. This will enable you to better control the work piece and minimize burning on the more resinous woods such as cherry or maple. Speed control is especially important on less expensive routers, as bits can vibrate excessively at full speed. Finally, the router should be table-mounted. A sturdy, flat router table and a solid squared fence are important for producing quality doors. Routing rails and stiles freehand is NOT recommended. Choosing Your Materials Rails and Stiles: Wood for your rails and stiles should be straight- grained and knot free. Ends and edges should be square to the face of the wood.
    [Show full text]
  • Custom Cabinet Doors
    Sherwood Industries Custom Cabinet Doors Whether you’re building new cabinets or refacing old cabinets, Sherwood has the cabinet door solution for you. A time-honored method for Our miter-joined Stick & Cope joining rails and stiles. Rails, doors have been Miter doors or horizontal members of a designed to share the door frame, are “coped” on same maximum edge the ends, as well as “stuck” grain exposure as our along their inside edges. The stick & cope joints vertical members of the door through the use of frame, or stiles, have “stick- classic mortise and ing” along their inside edges. tenon joinery. The Hence the term stick & cope. tenon, or tongue, has The tenon, or tongue, on the coped end of the rail, along with the matching a matching groove, or mortise, in the mating component. inside profile shape on the rail and the stile, have sufficient edge grain to This ensures maximum edge grain exposure in a joint that would help ensure a good glue joint. Modern woodworking adhesives do not bond otherwise have too much end grain for acceptable adhesion. well in end grain applications, so it is important to have as much edge, or All of our doors and drawer front assemblies are pinned from face grain, as possible in any glue joint. the backside for added stability. for more info fax order forms email order forms to 1-800-277-8888 to 1-800-277-0443 [email protected] Table of Contents General Information Sherwood General InformatIon and You'll find our most common design options in Warranty SpecIfIcatIonS ⸠⸠ 2-3 the following pages.
    [Show full text]