DOCSLIB.ORG

The Hong Kong Institution of Engineers Engineering Graduate Training Scheme “A”

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
The Hong Kong Institution of Engineers Engineering Graduate Training Scheme “A” THE HONG KONG INSTITUTION OF ENGINEERS ENGINEERING GRADUATE TRAINING SCHEME “A” Eligibility to Scheme “A” Training for Graduates of Engineering Programmes Accredited by the HKIE RMIT University, University of Macau, THEi Remarks: Please refer to the separate documents regarding the notes of the HKIE accredited engineering degree programmes and the Scheme “A” related notes. Ref No University Degree JUPAS Accredited until Eligible Scheme Programme intake year of "A" Discipline Code Royal Melbourne Offshore Programmes Delivered in Hong Kong Institute of Vocational Institute of Education (Tsing Yi) (Please refer the below Washington Accord Technology Applicability Notes) RMIT-1 University (RMIT Bachelor of Engineering in -- 2018(55) ACE, BSS(w), University) Electrical Engineering CAI(al), ELL (Honours) (on part-time basis) (#) RMIT-2 Bachelor of Engineering in -- 2005(48) CVL Civil Engineering (on part- time basis) (#) RMIT-3 Bachelor of Engineering -- 2018(55) CVL, LTE(at) (Civil and Infrastructure) (Honours) (on part-time basis) (#) RMIT-4 Bachelor of Engineering -- Provisional(55)(+2) ACE, BSS(w), (Mechanical Engineering) CAI(br), MCL (Honours) (on part-time basis) (#) MacauU- University of Macau Bachelor of Science in -- 2019(49) CVL, BUD(bt), 1 Civil Engineering (FT) (@) GEL(bu), LTE(au) MacauU- Bachelor of Science in -- 2019(50) CAI(av), ELL (ai) 2 Electrical and Computer Engineering (FT) (@) MacauU- Bachelor of Science in -- 2019(51) BSS(w1), MCL 3 Electromechanical Engineering (FT) (@) THEi-1 The Technological BEng (Hons) Degree in -- Provisional(+1) CVL, GEL, and Higher Civil Engineering STL THEi-2 Education Institute BEng (Hons) Degree in -- Provisional(+1) ENV of Hong Kong Environmental Engineering and Management 1 Train 6/2017 THE HONG KONG INSTITUTION OF ENGINEERS ENGINEERING GRADUATE TRAINING SCHEME “A” Eligibility to Scheme “A” Training for Graduates of Engineering Programmes Accredited by the HKIE RMIT University, University of Macau, THEi Washington Accord Applicability Notes:- (i) Programme implemented without differentiation in two different jurisdictions, each with accrediting bodies who are signatories to the Accord: Accreditation/recognition of the off-shore implementation of the programme will be undertaken on a collaborative basis, initiated by the signatory of the jurisdiction in which the programme is headquartered. The offshore implementation, of the programme, must satisfy the accreditation/recognition criteria and requirements of both signatories. (ii) Differentiated Programme offered within the jurisdiction of a signatory: Accreditation/recognition of the off-shore programme offering must be undertaken by the signatory of the jurisdiction in which the programme is delivered in consultation with the signatory of the jurisdiction in which the provider is headquartered. (iii) Undifferentiated or Differentiated Programme offered within a non-Accord jurisdiction: Accreditation/recognition of the off-shore programme offering must be undertaken by the signatory of the jurisdiction in which the programme is headquartered. (#) The programmes have also been accredited by Engineers Australia and are therefore recognised under the Washington Accord. (@) The following signatories of the Washington Accord have confirmed their recognition of the programmes(@): Australia Represented by Engineers Australia Canada () Represented by Engineers Canada China Represented by China Association for Science and Technology Chinese Taipei Represented by Institute of Engineering Education Taiwan India Represented by National Board of Accreditation, India Ireland Represented by Engineers Ireland Japan Represented by Japan Accreditation Board for Engineering Education Korea Represented by Accreditation Board for Engineering Education of Korea New Zealand Represented by Institution of Professional Engineers New Zealand Russia () Represented by Association for Engineering Education of Russia Singapore () Represented by Institution of Engineers Singapore Turkey () Represented by Association for Evaluation and Accreditation of Engineering Programs (MUDEK) United Kingdom Represented by Engineering Council UK United States Represented by Accreditation Board for Engineering and Technology The following signatories of the Washington Accord have confirmed their recognition of the HKIE accredited programmes(@) at the University of Macau on a case by case basis, where accreditation made by the HKIE will contribute a significant weighting to the final consideration. 2 Train 6/2017 THE HONG KONG INSTITUTION OF ENGINEERS ENGINEERING GRADUATE TRAINING SCHEME “A” Eligibility to Scheme “A” Training for Graduates of Engineering Programmes Accredited by the HKIE RMIT University, University of Macau, THEi Malaysia () Represented by Board of Engineers Malaysia South Africa () Represented by Engineering Council of South Africa Sri Lanka Represented by The Institution of Engineers Sri Lanka () Re-confirmation on recognition is being sought. 3 Train 6/2017 .
Load more

Recommended publications
  • REQUIREMENTS for ACCREDITATION of ENGINEERING EDUCATION PROGRAMMES ACC 02 October 2020 (Version 3.1)
    REQUIREMENTS FOR ACCREDITATION OF ENGINEERING EDUCATION PROGRAMMES ACC 02 October 2020 (version 3.1) DOCUMENT AND VERSION CONTROL Version Action Approver Date 2.1 Formatted Standards and Accreditation February 2014 Board 2.2 Changes to terminology Standards and Accreditation May 2016 Renumbering of criteria Board 2.3 Clarification of the purpose of the Standards and Accreditation February 2017 Knowledge Profile Board Revision to criterion 3.3 – Assessment; 4.1 – Academic Staff Changes to incorporate accreditation of postgraduate programme (new Part C) Inclusion of Contents Page 3.1 Reformatted to align with Engineering New Standards and Accreditation October 2020 Zealand Brand. Board Revision to criterion 2.7 – Practical work experience in industry CONTENTS PART A: BACKGROUND AND DEFINITIONS 1 1. BACKGROUND 1 2. INTERPRETATION 2 3. KNOWLEDGE PROFILE 2 4. RANGE OF PROBLEM SOLVING 4 PART B: SPECIFIC ACCREDITATION REQUIREMENTS FOR THE ACCREDITATION OF PROGRAMMES TO AN INTERNATIONAL ACCORD STANDARD 6 1. PROGRAMME GRADUATE OUTCOMES 6 2. PROGRAMME DESIGN 18 3. ASSESSMENT TO ACHIEVE THE DESIRED OUTCOMES 19 4. CAPACITY AND CAPABILITY 20 5. QUALITY ASSURANCE AND MANAGEMENT SYSTEMS 23 PART C: SPECIFIC ACCREDITATION CRITERIA FOR THE ACCREDITATION OF POSTGRADUATE PROGRAMMES BASED ON SPECIFIC BODIES OF KNOWLEDGE 26 1. PROGRAMME GRADUATE OUTCOMES 26 2. PROGRAMME DESIGN 26 3. ADMISSION STANDARDS 26 4. ASSESSMENT TO ACHIEVE THE DESIRED OUTCOMES 27 5. ACADEMIC STAFF 27 6. TECHNICAL STAFF 28 7. PRACTICAL TEACHING FACILITIES AND LEARNING RESOURCES 28 8. EDUCATIONAL AND PROFESSIONAL CULTURE 28 9. QUALITY ASSURANCE AND MANAGEMENT SYSTEMS 28 PART A: BACKGROUND AND DEFINITIONS 1. BACKGROUND Engineering New Zealand accredits engineering programmes against outcomes-based standards that have been established by the Dublin, Sydney and Washington Accords to define the general academic standards for entry-to-practice in the engineering profession.
    [Show full text]
  • Education Report
    Fire Safety Engineering Education Report Current Status of Education, Training and Stated Competencies for Fire Safety Engineers ACKNOWLEDGEMENTS The Warren Centre extends our gratitude to those individuals, government agencies, professional organisations, and corporations who shared their views and insights for this report. AUTHORS OTHERS INVOLVED IN THE PROJECT • Professor Jose Torero, University College of London • Document Review Workshop: Samantha Adrichem, • Dr David Lange, the University of Queensland Brian Ashe, Jonathan Barnett, Ashley Brinson, Melissa Chandler, Ian Dart, Melanie De Gioia, Greg du Chateau, • Mr Mahmut Horasan, Scientific Fire Services Mike Essery, Phil Finnimore, Damien Flynn, Marianne • Dr Andres Osorio, the University of Queensland Foley, Gregory Hancock, John Hewitt, Kevin Holt, Peter • Dr Cristian Maluk, the University of Queensland Johnson, Dick Kell, Stephen Kip, Shahil Lal, David Lange, Brad Liu, Rob Marinelli, Lawrence Reddaway, • Dr Juan Hidalgo, the University of Queensland Mark Tatam, Jose Torero, Jamie Vistnes, Amanda • Peter Johnson, Arup Wesley, Matthew Wright, Michael Wynn-Jones, SPONSORS TO DATE • Peer Review: Samantha Adrichem, John Hewitt, Lawrence Reddaway, Greg du Chateau, Peter Johnson, • Alan Wilson Insurance Brokers Mark Tatam, IFE Built Environment Technical Group, • Aurecon Marianne Foley, Jeff Wood, Brian Ashe • Fire & Rescue NSW • Red Fire Engineers • Scientific Fire Services • Victorian Building Authority Warren Centre Fire Safety Engineering Project Kick-off, July 2018. ABOUT THE WARREN CENTRE FIRE SAFETY ENGINEERING PROJECT The Warren Centre brings industry, government and This is the second research project of The Warren academia together to create thought leadership in Centre at the University of Sydney relating to Fire Safety engineering, technology, and innovation. We constantly Engineering.
    [Show full text]
  • Washington Accord Accredited Degrees
    Part (1) Washington Accord accredited degrees. Undergraduate engineering degree programmes which are conducted within the Country/Region and accredited by the corresponding Accrediting Organisation Country Accrediting Organisation and Reference AUSTRALIA https://www.engineersaustralia.org.au/About-Us/Accreditation Engineers Australia (1989) CANADA https://engineerscanada.ca/become-an-engineer/for-internationally-trained-engineers The Engineers Canada (1989) CHINA China Association for Science and http://english.ceeaa.org.cn/main!programs4EN.action Technology (2016) CHINESE TAIPEI Institute of Engineering Education http://www.ieet.org.tw/search/searchListE1.aspx Taiwan (2007) HONG KONG CHINA The Hong Kong Institution of Engineers https://www.hkie.org.hk/en/quali/program/ (1995) INDIA http://www.nbaind.org/wa_program.aspx National Board of Accreditation (2014) (Applies only to programmes accredited by NBA offered by education providers accepted by NBA as Tier 1 institutions.) IRELAND http://www.engineersireland.ie/membership/members-abroad.aspx Engineers Ireland (1989) JAPAN Japan Accreditation Board for https://jabee.org/en/accreditation/program Engineering Education (2005) REPUBLIC OF KOREA Accreditation Board for Engineering http://www.abeek.or.kr/program Education of Korea (2007) MALAYSIA http://www.eac.org.my/web/list_accredited.html Board of Engineers Malaysia (2009) NEW ZEALAND https://www.engineeringnz.org/resources/accredited-engineering-qualifications/accredited-four- Institution of Professional Engineers year-engineering-degrees/
    [Show full text]
  • Impact of the Washington Accord on Mobility of Engineers Through Standards
    Impact of the Washington Accord on Mobility of Engineers through Standards Accreditation Session: Global Engineering Deans Conference: Chicago 2013 Hu Hanrahan Chairman, Washington Accord 1 The Washington Accord • The Washington Accord (WA) is an agreement among signatory accrediting agencies that: – having verified that criteria, policies and procedures for accrediting engineering academic programs are comparable, – accreditation decisions made by one signatory are acceptable to the others for academic programs providing the educational foundation for the practice of engineering at the professional level • The Washington Accord is one of six agreements constituting the International Engineering Alliance (IEA) See: www.ieagreements.org 2 Development of the Washington Accord Canada Russia Ireland UK Japan USA Turkey China Korea Pakistan Bangladesh Chinese Taipei India Hong Kong Sri Lanka Philippines Malaysia Singapore 1989: Original 6 1990s: +2 South Africa Australia 2000s: +5 New Zealand 2010s: +2 3 Provisional Status Mobility of Graduates • Mobility of graduates flows from: – the definition and achievement of substantially equivalent standards by the signatories, – Verification of the signatory’s accreditation in the WA review processes • The Washington Accord exemplar standard is part of the IEA Graduate Attributes • The WA Graduate Attributes are related to the IEA Professional Competencies defined for Professional Engineers or equivalent. 4 Structure of the Graduate Attributes Knowledge profile elements Attributesan assessable 1-12:
    [Show full text]
  • Frequently Asked Questions About the EAC/BEM Engineering Programme Accreditation Policy
    Frequently Asked Questions about the EAC/BEM Engineering Programme Accreditation Policy 1. What is accreditation? EAC accreditation is to ensure that graduates of the accredited engineering programmes satisfy the minimum academic requirements for registration as a graduate engineer with the Board of Engineers Malaysia (BEM) and for admission to graduate membership of IEM. 2. Why EAC Accreditation is important? Accreditation helps students and their parents to choose quality college programmes. Accreditation enables employers to recruit graduates they know are well-prepared. Accreditation gives colleges and universities a structured mechanism to assess, evaluate, and improve the quality of their programs. 3. Is it true that BEM do not recognize three (3) year degree programmes and only four (4) year programmes are recognized? All institutions of higher learning in Malaysia have been informed since 2000 that no engineering programmes with 3 years duration of study would be acceptable for BEM’s recognition or accreditation. Only a four year (or more) programme is accreditable by the EAC. The BEM however provides a pathway for unrecognized engineering degree holders, but they would only be considered upon completing Master programmes (taught mode) in related engineering discipline, on a case to case basis. It must be noted that the 3 year programme will still remain as unrecognized despite the holder having achieved the Master degree. 4. Where do I check whether my engineering programme is accredited by Board of Engineers Malaysia (BEM)? There is in our official website, www.eac.org.my, the link for “List of Accredited Engineering Programme (Malaysia)” 5. Is getting accreditation the responsibility of the graduate or the faculty of engineering of the Institution of Higher Learning (IHL)? It is the responsibility of the Institution of Higher Learning (IHL).
    [Show full text]
  • A Critical Analysis of Engineering Education Accreditation in China
    Paper ID #8896 Engineering Education Policymaking in Cross-National Context: A Critical Analysis of Engineering Education Accreditation in China Qin Zhu, Purdue University Qin Zhu is a PhD student in the School of Engineering Education at Purdue University. His main re- search interests include global/comparative/international engineering education, engineering education policy, and engineering ethics. He received his BS degree in material sciences and engineering and first PhD degree in philosophy of science and technology (engineering ethics) both from Dalian University of Technology, China. His first PhD dissertation on improving the practical effectiveness of engineering ethics that draws on theories in hermeneutics, practical philosophy, and discourse ethics has recently been awarded the ”Outstanding Dissertation Award” in Liaoning Province, China. Prof. Brent K Jesiek, Purdue University, West Lafayette Dr. Brent K. Jesiek is Assistant Professor in the Schools of Engineering Education and Electrical and Computer Engineering at Purdue University. He is also an Associate Director of Purdue’s Global En- gineering Program, leads the Global Engineering Education Collaboratory (GEEC) research group, and is the recipient of an NSF CAREER award to study boundary-spanning roles and competencies among early career engineers. He holds a B.S. in Electrical Engineering from Michigan Tech and M.S. and Ph.D. degrees in Science and Technology Studies (STS) from Virginia Tech. Dr. Jesiek draws on expertise from engineering, computing, and the social sciences to advance understanding of geographic, disciplinary, and historical variations in engineering education and professional practice. Jian Yuan, Beihang University Jian YUAN is a Ph.D. Candidate at Beihang University, Beijing, China.
    [Show full text]
  • Engineers Australia Accredited Programs
    ENGINEERS AUSTRALIA ACCREDITED PROGRAMS CONTENTS AUSTRALIAN COLLEGE OF KUWAIT (NEXT GENERAL REVIEW 2018) ...............................................................2 AUSTRALIAN MARITIME COLLEGE (NEXT GENERAL REVIEW 2020) ............................................................... 3 AUSTRALIAN NATIONAL UNIVERSITY (NEXT GENERAL REVIEW 2020) ........................................................... 5 CENTRAL QUEENSLAND UNIVERSITY (NEXT GENERAL REVIEW 2021) ...........................................................8 CHARLES DARWIN UNIVERSITY (NEXT GENERAL REVIEW 2022) .................................................................. 14 CHISHOLM INSTITUTE OF TAFE (NEXT GENERAL REVIEW 2020) ................................................................... 16 CURTIN UNIVERSITY OF TECHNOLOGY (NEXT GENERAL REVIEW 2020) ....................................................... 17 DEAKIN UNIVERSITY (NEXT GENERAL REVIEW 2018) ..................................................................................... 21 EDITH COWAN UNIVERSITY (NEXT GENERAL REVIEW 2017) .......................................................................... 24 ENGINEERING INSTITUTE OF TECHNOLOGY (NEXT REVIEW 2019) ................................................................26 FEDERATION UNIVERSITY (NEXT GENERAL REVIEW 2022) - Formerly University of Ballarat ........................... 27 FLINDERS UNIVERSITY (NEXT GENERAL REVIEW 2021).................................................................................. 28 GRIFFITH UNIVERSITY (NEXT GENERAL REVIEW
    [Show full text]
  • In Canada, Engineering Is a Regulated Profession
    IN CANADA, ENGINEERING IS A REGULATED PROFESSION. This means that in Canada, you have to have a recognized undergraduate university degree in engineering and you have to be registered with (be a member of) a provincial engineering association in order to call yourself an engineer and in order to practice engineering as Member-in-Training (MIT) or Professional Engineer (P.Eng.). The association that regulates the engineering profession in Manitoba is called Engineers Geoscientists Manitoba. THERE ARE TWO MAJOR REQUIREMENTS FOR A PROFESSIONAL ENGINEER (P.ENG.) LICENSE IN MANITOBA A. You need to be considered academic qualified by Engineers Geoscientists Manitoba. There are three ways to be considered academically qualified by Engineers Geoscientists Manitoba: 1. Complete a Bachelor-level engineering degree from an accredited Canadian university program. 2. If your bachelor-level engineering degree is from an accredited engineering program in one of the countries listed in the Washington Accord (an international agreement), you can apply to Engineers Geoscientists Manitoba for a Verification Assessment and most likely, you will be considered academically qualified with no further requirements. The Washington Accord covers accredited bachelor-level engineering degrees from the USA since 1980, Ireland since 1989, Australia since 1989, Great Britain since 1989, New Zealand since 1989, Hong Kong since 1996, South Africa since November 1999, France since October 1999, and Japan since June 2005. 3. If your bachelor-level engineering degree is not covered by the previous two options, then you need to apply to Engineers Geoscientists Manitoba for an Assessment of Academic Credentials (see reverse side). ONCE YOU ARE CONSIDERED ACADEMICALLY QUALIFIED, YOU MAY REGISTER AS A MEMBER-IN-TRAINING (MIT) WITH ENGINEERS GEOSCIENTISTS MANITOBA.
    [Show full text]
  • Assessment Scheme (CAV Approved on 11 June 2021)
    Assessment Scheme (CAV Approved on 11 June 2021) Institute of Public Works Engineering Australasia (Victoria Division) Limited L1, 1192 Toorak Rd Camberwell PO Box 1022 Hawthorn 3122 ipwea.org/victoria Assessment Scheme 1.0 Introduction The Institute of Public Works Engineering Australasia (IPWEA) is the peak association for the professionals who deliver public works and engineering services to communities in Australia and New Zealand. IPWEA provides services to its members and advocacy on their behalf. IPWEA Victoria represents members throughout the state and offers a range of services – including continuing professional development opportunities – to civil engineers supporting the public works sector. First established as the Institute of Municipal Engineers in 1959 and incorporated as the Local Government Engineers’ Association of Victoria in 1963, IPWEA Victoria has a proud tradition of service to civil engineers engaged with the development and delivery of public infrastructure. The organisation joined the IPWEA group in 2007. The following Assessment Scheme has been approved for a period of five (5) years to support the transition of civil engineers servicing the public sector – especially those working for local government – to a regulated environment. This period is appropriate given the phased introduction of the Act and the likelihood that many civil engineers may not seek registration until mid-2022. The Scheme responds to s34 of the Professional Engineers Registration Act 2019 by addressing the five requirements applying to assessment schemes, including that the scheme: 1. adequately provides for the assessment of qualifications and competencies of engineers in an identifiable area of engineering i.e. structural, civil, mechanical, electrical and fire safety engineering 2.
    [Show full text]
  • A History of the International Engineering Alliance and Its Constituent Agreements
    A History of the International Engineering Alliance and its Constituent Agreements: Toward Global Engineering Education and Professional Competence Standards Those who cannot remember the past are condemned to repeat it. George Santayana (18631952) The Life of Reason, Volume 1, 1905 Acknowledgements The contributions and comments of the following are gratefully acknowledged. Finbar Callanan and Douglas Clyde provided information and insight on the early days of the Washington Accord. Jack Levy, the initiator of the Washington Accord, read an earlier draft of this history. Barry Grear provided information on the early period of the APEC Engineer Agreement. Special thanks go to John Webster for contributing the account of the APEC Engineer Agreement as well as section 4.1. Alec Hay made substantial contributions to the account of the EMF. Terry Stidworthy contributed to the sections on the Sydney and Dublin Accords as well as the ETMF. General contributions of Andrew Cleland, Basil Wakelin, Robin King and See Sew Gue are acknowledged. The Washington Accord history was expanded from that in a booklet published in 2014 to celebrate the 25th anniversary of the Accord written by Robin King and Hu Hanrahan. Hu Hanrahan contributed the Introduction, section 6 on the Graduate Attributes and Professional Competencies, Section 7 on the International Engineering Alliance and section 8 on the realignment of the mobility agreements as well as overall co-ordination. Version 1: September 2015 i Contents Foreword .....................................................................................................................................
    [Show full text]
  • Malaysia and the Washington Accord: What It Takes for Full Membership
    International Journal of Engineering and Technology, Vol. 1, No. 1, 2004, pp. 64 - 73 64 MALAYSIA AND THE WASHINGTON ACCORD: WHAT IT TAKES FOR FULL MEMBERSHIP H. Basri1, A. B. Che Man2, W. H. Wan Badaruzzaman3 and M. J. M. Nor3 1Chairman, Malaysian Council of Engineering Deans / Dean of Engineering, Universiti Kebangsaan Malaysia 2Chairman, Engineering Accreditation Council of Malaysia, 3Faculty of Engineering, Universiti Kebangsaan Malaysia E-mail: [email protected] ABSTRACT In 2003, Malaysia was admitted to the Washington Accord as a provisional signatory nation alongside Germany and Singapore. This development has been described as “significant in the history of the Washington Accord” [1] since it implied that these nations have demonstrated that their accreditation systems are conceptually similar to those of the full signatory members with respect to quality assurance in their engineering education programmes. In this paper, the authors will highlight the significance and implications of the Washington Accord agreement with special reference to developing countries. The paper will also document experiences of an engineering faculty in Malaysia and the Engineering Accreditation Council (EAC) of Malaysia in meeting the requirements of the Washington Accord sponsors and mentors. In particular, efforts by the Engineering Faculty of Universiti Kebangsaan Malaysia (National University of Malaysia) in introducing elements of Outcome-Based Education as a key requirement for full membership of the Accord will be presented. Key words: Washington Accord, Accreditation System, Quality Assurance, Engineering Education THE WASHINGTON ACCORD The Washington Accord is a multinational agreement which recognizes the substantial equivalency of engineering degree programmes accredited by the responsible bodies in each of the current signatory countries.
    [Show full text]
  • Creation of a Greater Caribbean Regional Engineering Accreditation System
    AC 2010-2197: CREATION OF A GREATER CARIBBEAN REGIONAL ENGINEERING ACCREDITATION SYSTEM Hugo Pirela, InterAmerican Development Bank Dr. Hugo Pirela is a representative of the Interamerican Development Bank in the Dominican Republic and leads the Greater Caribbean Region Engineering Accreditation System project. Gisela Coto Quintana, SINAES Dr. Gisela Coto Quintana is the International Consultant on the Greater Caribbean Region Engineering Accreditation System project, and is an engineering accreditation expert in the SINAES, an accreditation agency in Costa Rica. Juan Luis Crespo Marino, Universidade da Coruna Dr. Juan Luis Crespo Mariño is a Research Associate on the Greater Caribbean Region Engineering Accreditation System project and is a Professor, expert in accreditation systems, at the Universidade da Coruña in Spain. Miguel J. Escala, Instituto Tecnológico de Santo Domingo Dr. Miguel Escala Figueredo is Rector of the Instituto Tecnológico de Santo Domingo, INTEC, in the Dominican Republic. INTEC is the institution leading the Greater Caribbean Region Engineering Accreditation System. Maria M. Larrondo Petrie, Florida Atlantic University Dr. Maria Larrondo Petrie is Associate Dean and Professor in the College of Engineering and Computer Science at Florida Atlantic University in the USA. She is also the Executive Director of the Latin American and Caribbean Consortium of Engineering Institutions (LACCEI), on the Executive Committee of the International Federation Engineering Education Societies (IFEES) and on the Board of the International Division of the American Society of Engineering Education (ASEE). Zenaida Otero Gephardt, Rowan University Dr. Zenaida Otero Gephardt is Associate Professor of Chemical Engineering at Rowan University. She is Vice President of Accreditation of the Latin American and Caribbean Consortium of Engineering Institution (LACCEI), where she organizes the Organization of American States' Workshop on "Advancing Strategies for Improving Engineering Program Accreditation and Quality Assurances in the Americas".
    [Show full text]