DOCSLIB.ORG

Mr. Gasket Catalog

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Mr. Gasket Catalog Restore. Restyle. Relive. PRODUCT CATALOG THE MR. GASKET STORY Back in 1964, Joe Hrudka was a drag racer in Northern Ohio who was looking to solve a problem that parts manufacturers had not addressed. Using his own 1957 Chevy drag race car as a test vehicle, he created a line of engine gaskets and fasteners proven to seal and withstand extreme temperatures, pressures and stresses created by high performance engines. This product line that was developed by a drag racer would evolve into a brand of legendary proportions over the next 50 years. Mr. Gasket started with Joe’s ‘57 Chevy and has continued to advance and expand with application coverage and even more new products for muscle cars. Head gaskets, exhaust gaskets and oil pan gaskets were just the beginning. The Mr. Gasket brand develops and distributes a variety of performance parts for your vehicle including: carburetor and fuel accessories, chrome-plated accessories, cooling system accessories, engine components, fuel additives, shifter accessories, specialty tools, suspension and driveline components. Located in Cleveland, Ohio, the Mr. Gasket team continues to design, develop, manufacture and distribute products that bring back the luster and performance that everyone remembers to a variety of auto projects. It may have started with a Chevrolet, but when you are ready to Restore, Restyle and Rebuild your car, Mr. Gasket is who you can trust to have the parts and advice you need to complete your project. Find out about all of the Mr. Gasket products and applications at www.mr-gasket.com www.mr-gasket.com TABLE OF CONTENTS CHEMICALS ........................................................................ 2-5 Cataclean Tire Treatment Coolant Additive Fuel Treatment AIR SCOOPS, AIR CLEANERS & ACCESSORIES .............................................. 6-13 Air Cleaner Accessories Air Scoops Air Cleaners Double Barrel Scoop Air Filter Elements VALVE COVERS, BREATHERS & ACCESSORIES ............................................. 14-25 Breathers Valve Cover Accessories Engine Dress-Up Kits Valve Covers Grommets & Plugs PULLEYS, ENGINE COMPONENTS & ENGINE ACCESSORIES ................................... 26-39 Alternator Brackets Cam/Crank Keys Master Cylinder Covers Pipe Plugs Timing Covers Brake Fluid Cap Covers Engine Cover Insert Motor & Transmission Pulley Dimensions Timing Tabs (Late Model) (Late Model) Mounts Pulleys Timing Tape OIL PANS, DIPSTICKS & OIL ACCESSORIES ............................................... 40-46 Dipstick Dimensions Oil Cap Covers (Late Model) Dipsticks Oil Pans Oil Accessories Remote Oil Filter Systems COOLING SYSTEM .................................................................. 47-54 Electric Fans Radiator & Heater Hose Water Necks Flex Fans Radiator Thermocaps Water Pumps Radiator Cap Covers (Late Model) Thermostats Power Steering Cap Covers (Late Model) CARBURETOR & FUEL SYSTEM ........................................................ 55-71 Carb Adapters Carb Spacers Fuel Line Components Fuel Pump Block-Off Plates Carb Components Fuel Blocks Fuel Lines Fuel Pumps Carb Linkage & Brackets Fuel Filters Fuel Pressure Gauges IGNITION & ELECTRICAL ............................................................. 72-78 Advance Curve Kits Distributor Clamps Alternators Fuse Box Covers-Late Model Coil Brackets Wire Looms & Separators Battery Cable Kits Hose & Cable Sleeving Kits Distributor Caps & Accessories Wire Markers Electric Door & Trunk Kits SUSPENSION, DRIVELINE & HEAT SHIELD................................................. 79-80 Clutch Linkage Accessories Ring Gear Spacers Coil Spring Accessories Traction Bar Accessories Pivot Balls EXTERIOR PARTS, INTERIOR PARTS & SHIFTERS ........................................... 81-91 Anchortrax Hood Pin Kits Mirrors Warning Flag Pedal Pads Automatic Shifters Shifter Bushings & Clips Blue Dots License Plate Accessories Rear End Covers Wheel/Tire Accessories Door Sill Plates Manual Shifters Shifter Knobs Exhaust Cut-Out Lug Nuts Turn Signal Lights Door Lock Knobs (Late Model) Shifter Boots Hidden Radio Antenna GASKETS & FASTENERS ............................................................ 92-146 Cam & Balancer Bolts Chrome Plated Fasteners Cylinder Head Gaskets Exhaust Gaskets Intake Gaskets Oil Pan Gaskets Timing Cover Gaskets Valve Cover Gaskets Carburetor Base Gaskets Collector Gaskets Drive Train Fasteners Gasket Material Intake Manifold Bolts Rocker Arm Nuts & Studs Transmission Oil Pan Gaskets Carburetor Studs Custom Gaskets Engine Overhaul Gaskets Kits Head Bolts & Washers Oil Pan Bolts/Studs Supercharger Gaskets Valve Cover Bolts TOOLS & PROMOTIONAL ITEMS ...................................................... 147-148 Clutch Alignment Tools Engine Oil Primer Funnels Steering Wheel Puller Counter Stools Degree Wheels Engine Port Polishing Kit Hot Rod Calculator Banners Decals Engine Cleaning Brushes Fluid Zap Safety Wire Twist Pliers Corky Metal Sign Need Assistance? 216-658-6396 1 CHEMICALS • Cleans catalytic converter REDUCES TOTAL HYDROCARBON • Cleans oxygen EMISSIONS BY UP TO 50%* sensors • Cleans fuel injectors • Cleans cylinder heads MADE IN USA SAFE FOR GASOLINE, DIESEL AND HYBRID #120007 Cataclean ENGINES * Performance results are dependent on driver habits and vehicle conditions 2 www.mr-gasket.com CHEMICALS Proven results! Testing shows that Cataclean cleans catalytic converters. Cataclean does not alter fuel composition and is safe for gasoline, diesel and hybrid engines. Use Cataclean to fix drivability issues such as power reduction, hesitation and hard starts, as a pre-treatment before an emissions test or to extend the life of your vehicle engine. For optimum performance and protection, use Cataclean four times a year. Made in the USA. Catalytic Converter #120007D Inlet Before Cataclean Inlet After Cataclean Cataclean POP Outlet Before Cataclean Outlet After Cataclean CLEANS AS EASY TO USE... YOU DRIVE! SIMPLY POP, POUR AND GO! MADE IN USA Need Assistance? 216-658-6396 3 CHEMICALS NEW! CATACLEAN FUEL & EXHAUST SYSTEM CLEANER • Reduces total hydrocarbon emissions by up to 50% • Safe for gasoline, diesel and hybrid engines • Cleans your vehicle’s catalytic converter, oxygen sensors, fuel injectors and cylinder heads 16 FL. OZ. ....................................................................................... 120007 CATACLEAN DISPLAY • Must order 6 bottles to receive display Cataclean Display ...........................................................................120007D XTEND OIL CHANGE • Restores the lubricating property of old oil, allowing you to go longer intervals between oil changes • Increases interval from 3,000 to 6,000 miles 3 FL. OZ. ............................................................................................8070G 40 BELOW COOLANT ADDITIVE • Makes coolant a better heat conductor, making the cooling system work more efficiently • Reduces coolant temperature up to 40 degrees 30 FL. OZ. ..........................................................................................4032G FAST FORWARD FUEL TREATMENT • DETECTABLE • Instantly add horsepower and increase engine torque • Safe for premium unleaded, race fuel & methanol • Compatible with nitrous systems 16 FL. OZ. ..........................................................................................1616G MADE IN USA 4 www.mr-gasket.com CHEMICALS NEW! HOT LAP ORIGINAL TIRE TREATMENT • UNDETECTABLE • Lasts for up to 200 laps • Works with asphalt & dirt • Tires last up to 50% longer & run 10-20 degrees cooler 1 GAL. ...............................................................................................7000G HOT LAP II TIRE TREATMENT • UNDETECTABLE • Lasts for up to 25 laps • Works with asphalt & dirt • Tires last up to 50% longer & run 10-20 degrees cooler 1 GAL. ...............................................................................................6000G HOT LAP VICTORY LANE TIRE TREATMENT • DETECTABLE • Lasts for up to 25 laps • Works with asphalt & dirt • Tires last up to 50% longer & run 10-20 degrees cooler 1 GAL.. ..............................................................................................5000G HOT LAP PRO BITE TIRE GRIP • DETECTABLE • Lasts for up to 25 laps • Improves forward and side bite 30 FL. OZ. ..........................................................................................8000G HOT LAP RACING TIRE CLEANER • Prepares tires for Hot Lap treatment • Cleans surface and opens pores • Great for used tires as well 30 FL. OZ. ..........................................................................................7050G MADE IN USA Need Assistance? 216-658-6396 5 AIR CLEANERS VELOCITY STACK WITH FILTER* EXPRESS PRODUCTS • Polished aluminum • Includes foam filter element • Fits most 5-1/8˝ dia. carb. necks • 4-1/2˝ tall x 8-7/8˝ dia. • Great for street use 2085 Velocity Stack ...................................................................................... 2085 VELOCITY STACK* • Polished aluminum • Fits most single 4-BBL. and dual 4-BBL. carbs with 5-1/8˝ dia. necks 46 • 5˝ tall x 8-1/2˝ dia. Velocity Stack .......................................................................................... 46 EASY-FLOW AIR CLEANERS* 1480 EXPRESS PRODUCTS • Chrome plated base and top with high CFM replaceable flame retardant paper element 2-, 3- AND 4-BBL. CARBURETORS FITS 5-1⁄8˝ DIA. CARB. NECK 2-1⁄4˝ Tall x 14˝ Dia ............................................................................... 1480 2-3⁄4˝ Tall x 9˝ Dia ................................................................................
Load more

Recommended publications
  • Engine Components and Filters: Damage Profiles, Probable Causes and Prevention
    ENGINE COMPONENTS AND FILTERS: DAMAGE PROFILES, PROBABLE CAUSES AND PREVENTION Technical Information AFTERMARKET Contents 1 Introduction 5 2 General topics 6 2.1 Engine wear caused by contamination 6 2.2 Fuel flooding 8 2.3 Hydraulic lock 10 2.4 Increased oil consumption 12 3 Top of the piston and piston ring belt 14 3.1 Hole burned through the top of the piston in gasoline and diesel engines 14 3.2 Melting at the top of the piston and the top land of a gasoline engine 16 3.3 Melting at the top of the piston and the top land of a diesel engine 18 3.4 Broken piston ring lands 20 3.5 Valve impacts at the top of the piston and piston hammering at the cylinder head 22 3.6 Cracks in the top of the piston 24 4 Piston skirt 26 4.1 Piston seizure on the thrust and opposite side (piston skirt area only) 26 4.2 Piston seizure on one side of the piston skirt 27 4.3 Diagonal piston seizure next to the pin bore 28 4.4 Asymmetrical wear pattern on the piston skirt 30 4.5 Piston seizure in the lower piston skirt area only 31 4.6 Heavy wear at the piston skirt with a rough, matte surface 32 4.7 Wear marks on one side of the piston skirt 33 5 Support – piston pin bushing 34 5.1 Seizure in the pin bore 34 5.2 Cratered piston wall in the pin boss area 35 6 Piston rings 36 6.1 Piston rings with burn marks and seizure marks on the 36 piston skirt 6.2 Damage to the ring belt due to fractured piston rings 37 6.3 Heavy wear of the piston ring grooves and piston rings 38 6.4 Heavy radial wear of the piston rings 39 7 Cylinder liners 40 7.1 Pitting on the outer
    [Show full text]
  • Oil Leaks from Valve Cover Gasket 19-2309
    Page 1 of 5 TECHNICAL SERVICE BULLETIN 19-2309 5.0L - Oil Leaks From Valve Cover Gasket 16 October 2019 This bulletin supersedes 19-2260. Reason for update: Incorrect or Incomplete Symptom Model: Ford 2015-2017 Mustang Summary This article supersedes TSB 19-2260 to update the Issue Statement and Service Procedure. Issue: Some 2015-2017 Mustang vehicles equipped with a 5.0L engine may exhibit an oil leak from either valve cover gasket. This may be due to the valve covers warping due to excessive heat. To correct the condition, follow the Service Procedure steps to add fasteners to both valve covers. Action: Follow the Service Procedure steps to correct the condition on vehicles that meet all of the following criteria: • 2015-2017 Mustang • 5.0L engine • Oil leak from either valve cover gasket Parts Part Number Description Quantity JR3Z-00812-B Valve Cover Bolt (Package Contains 1 Piece, 8 Pieces Required) 8 W712334-S440 Strut Tower Brace/Cowl Extension Nut (Package Contains 3 Pieces, 4 2 Pieces Required) ER3Z-6584-B Valve Cover Gasket (Left Side) 1 ER3Z-6584-A Valve Cover Gasket (Right Side) 1 BR3Z-6C535-A As VCT Seal Needed BR3Z-6C535-B As Spark Plug Seal Needed ZC-30-A As Motorcraft® Silicone Gasket Remover Needed ZC-31-B As Motorcraft® Metal Surface Prep Wipes Needed TA-30 As Motorcraft® Silicone Gasket and Sealant Needed PM-4-A As Motorcraft® Metal Brake Parts Cleaner Needed XO-5W20- Motorcraft® SAE 5W-20 Synthetic Blend Motor Oil (All Markets Except As Q1SP Canada) Needed CXO-5W20- As Motorcraft® SAE 5W-20 Super Premium Motor Oil (Canada Only) LSP6 Needed http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19 -2309/US/ ..
    [Show full text]
  • Article 2: F1600/F2000 2021 Technical Specifications
    ARTICLE 2: F1600/F2000 2021 TECHNICAL SPECIFICATIONS ! ARTICLE 2.1: F1600/F2000/Technical Specifications…...........pgs 2-28 Update 4-20-21 — 2.2.25.1 & 2.2.26.1 ARTICLE 2.2: Mazda MZR F2000/Technical Specifications…pgs 29-37 ! ! Article 2.1: F1600/F2000 Technical Specifications - 2021 ____________________________________________________________ These specifications are part of Formula Race Promotions (FRP) Competition Rules and all automobiles shall conform with these Specifications and FRP Pro Racing Rules (PRR). F1600, F2000, is intended to provide competitors and interested manufacturers with the opportunity to compete in purpose built, highly modified open wheel single seat cars. FRP may alter or adjust specifications and require, permit, or restrict certain specific components to equate competitive potential as deemed necessary. In an effort to control shock/damper technology and cost to a level reasonable for competitive racing, any fluid dampers are allowed, with the following restrictions: 1. Maximum of 4 dampers/shock absorbers per vehicle. 2. Dampers must be independent from each other with no interconnectivity. However, data acquisition is permissible, as long as it serves no other purpose. 3. Dampers must be manually adjustable only. 4. Mechatronic valves, G valves, hybrid inerters, inerters and mass dampers are prohibited. 5. Electro/Magnetic shock fluid is prohibited. F1600 and F2000 PREPARATION RULES - 2021 Definitions a. F1600: A formula for single-seat, tubular frame, flat bottom, open-wheel racing cars using standard Ford 1600 “crossflow” pushrod engines, or a Honda Fit 1500 (L15A7) overhead cam engine, with firewall, floor, and safety equipment conforming to the FRP PRR. b. F2000: A formula for single-seat, tubular frame, flat bottom, open-wheel racing cars using the Ford 2 liter single overhead camshaft “NE” series engine, the 1971-74 Pinto/Capri 2 liter single overhead camshaft engine, or the Ford Zetec ZX-3 2 liter dual overhead camshaft engine.
    [Show full text]
  • Wideband O2 Sensors and Air/Fuel (A/F) Sensors
    Home, Auto Repair Library, Auto Parts, Accessories, Tools, Manuals & Books, Car BLOG, Links, Index Wideband O2 Sensors and Air/Fuel (A/F) Sensors by Larry Carley copyright 2019 AA1Car.com Wideband Oxygen sensors (which may also be called Wide Range Air Fuel (WRAF) sensors) and Air/Fuel (A/F) Sensors, are replacing conventional oxygen sensors in many late model vehicles. A wideband O2 sensor or A/F sensor is essentially a smarter oxygen sensor with some additional internal circuitry that allows it to precisely determine the exact air/fuel ratio of the engine. Like an ordinary oxygen sensor, it reacts to changing oxygen levels in the exhaust. But unlike an ordinary oxygen sensor, the output signal from a wideband O2 sensor or A/F sensor does not change abruptly when the air/fuel mixture goes rich or lean. This makes it better suited to today's low emission engines, and also for tuning performance engines. Oxygen Sensor Outputs An ordinary oxygen sensor is really more of a rich/lean indicator because its output voltage jumps up to 0.8 to 0.9 volts when the air/fuel mixture is rich, and drops to 0.3 volts or less when the air/fuel mixture is lean. By comparison, a wideband O2 sensor or A/F sensor provides a gradually changing current signal that corresponds to the exact air/fuel ratio. Another difference is that the sensor's output voltage is converted by its internal circuitry into a variable current signal that can travel in one of two directions (positive or negative).
    [Show full text]
  • IM-391 April 2020
    Inline Fume Exhaust Fans IM-391 April 2020 General Installation, Operation and Maintenance Instructions For Aerovent Products Throughout this manual, there are a number of HAZARD WARNINGS that must be read and adhered to in order to prevent possible personal injury and/or damage to equipment. Two signal words "WARNING" and "CAUTION" are used to indicate the severity of a hazard and are preceded by the safety alert symbol. WARNING Used when serious injury or death MAY result from misuse or failure to follow specific instructions. CAUTION Used when minor or moderate injury or product / equipment damage MAY result from misuse or failure to follow specific instructions. NOTICE Indicates information considered important, but not hazard-related. It is the responsibility of all personnel involved in installation, operation and maintenance to fully understand the Warning and Caution procedures by which hazards are to be avoided. INTRODUCTION This manual has been prepared to guide the users of AFE Fume Exhaust Fans in the proper installation, operation and maintenance procedures to insure maximum equipment life with trouble-free operation. AFE CONTENTS Inspection and Receiving ..................................................2 Handling and Rigging ........................................................2 CAUTION Unit Storage ........................................................................2 Installation Fan systems include rotating components and • Pre-Installation Checklist ..........................................2 electrical devices.
    [Show full text]
  • Your Vacuum Gauge Is Your Friend
    WRENCHIN’ @ RANDOM YOUR VACUUM GAUGE IS YOUR FRIEND Two Essential Diagnostic Tools No Hot Rodder Should Be Without, and How to Use Them Marlan Davis hI’ve been answering read- ers’ Pit Stop tech questions for decades, explaining how to improve performance, troubleshoot pesky problems, or recommend a better combina- tion. Yet rarely do any of these problem- solving requests include information on the problem combo’s vacuum reading. That’s unfor- tunate, as [Above: Two essential diagnostic tools no hot rodder should be with- vacuum out, from left: a Mityvac handheld can tell vacuum pump for testing vacuum you a heck of a lot about an consumers (some models will even engine’s condition, without the aid in brake bleeding), and a large, easy-to-read vacuum gauge like need to invest in a bunch of this one by OTC (this model also high-tech diagnostic tools. includes a pressure gauge for even So what’s the deal on more test possibilities). vacuum? Consider an internal- [Left: Knowing how to use a combustion engine as basically vacuum gauge is the key to a giant air pump that operates diagnosing many performance under the principles of pres- problems. It aids in tuning your sure differential. The difference motor to the tip of the pyramid. It even helps diagnose problems not between normal atmospheric seemingly engine-related, such as pressure (14.7 psi at sea level a weak power-brake system. Add at standard temperature and one to your toolbox today. pressure) and how hard this “pump” sucks under various engine-management system).
    [Show full text]
  • Ml7,™ the Fp Diesel® 7-Layer Head Gasket That Seals Rebuilt Engines Better!
    CM 11-1001 Technical Bulletin ML7,™ THE FP DIESEL® 7-L AYER HEAD GASKET THAT SEALS REBUILT ENGINES BETTER! ™ Sealing the most demanding area in a commercial engine – it takes today’s FP DIESEL SMART TIP Cummins® utilizes several types of valve stem seals most advanced gasket design. on the 24 valve ISB engines, depending on the FP Diesel® has introduced a highly advanced multi-layer-core head gasket fuel system. Please review the references below to assist you in ordering the correct valve stem seals. technology that will bring significantly enhanced combustion and fluid sealing capabilities and temperature resistance to a broad range For 1998-2002 engines using the VP44 of high-output commercial diesel engines: The ML7 head gasket. Injection Pump, with serial number 46239408 and below use: As commercial engine rebuilders look for the latest and best engine sealing solutions, FP Diesel’s ML7 gasket provides a new generation of head gaskets. BODY CONSTRUCTION The ML7 head gasket’s 7-layer construction features an advanced graphite material INTAKE VALVE STEM SEAL over a thicker, perforated stainless steel Yellow Viton® Center core for significantly increased rigidity. Part No. FP-3942989 The key to determining the thickness of the gasket body, armor and wire is achieving optimal load balance among the components and materials. The result is a much more solid and durable part. EXPANDED LOW-CARBON STEEL WIRE GRAPHITE FACING EXHAUST VALVE STEM SEAL Copper flash-coated low-carbon steel (LCS) The ML7’s resilient, conformable Green Viton® Center wire ring offers the ability to absorb stress graphite facing provides excellent Part No.
    [Show full text]
  • Pro Copper HG Inst
    Installation Instructions for: Pro Copper (”P” Prex) Head Gaskets For best results SCE Pro Copper Series (P prefix) Copper Head Gaskets should be used with sealant (if liquid cooled use Copper Coat, SCE p/n G1612) and o-ringed block or heads. 1. Before installing the gasket, perform a visual check to insure that no damage occurred during shipping, the gasket(s) should be flat and free of scratches. 2. SCE Copper head gaskets are annealed in a vacuum oven after punching to provide soft malleable gaskets which are ready to use, do not use a torch to soften the gaskets. 3. Pro Copper series head gaskets (P prefix) require the use of a sealant for coolant and oil passages and o-ring combustion seals installed in the head or block. (P/N 31542 o-ring kit). 4. If you are installing o-rings make sure that the o-ring diameter and location accommodates both bore opening and combustion chamber shape. This will determine the minimum inside diameter of the o-ring. 5. If the combustion chamber or bore is so large that o-rings must be placed less than .100” apart between cylinders, it is advisable to use a “figure 8” pattern for o-rings (see figure #2). This allows for more even clamp load over the entire head surface. 6. Recommended o-ring protrusion is not more than 25% of gasket thickness. Example: Gasket thickness .043”, o-ring height is .008” to .010”. Gasket thickness .050”, o-ring height is .010” to .012”. NOTE: For extreme boost or heavy nitrous an O-ring-Receiver-Groove arrangement is recom- mended (see figure #3).
    [Show full text]
  • HEAD GASKET Hot Engine Operation
    TO INSURE PROPER ENGINE OPERATION WE RECOMMEND THE FOLLOWING • Bleed cooling system, prior to engine start up. It may be necessary to raise the front of the vehicle to com- pletely bleed the air from the cooling system. • Use OEM recommended spark plugs, with the correct heat range. • Vacuum leaks cause lean air/fuel ratios and HEAD GASKET hot engine operation. • Check vacuum hoses. •Check Peak efficiency of the cooling system is essential to for proper operation of the EGR valve. •Check O2 Sen- ensure a successful repair of this engine. sor, coolant entering the combustion chamber from a cracked cylinder block/heads or a leaking head gas- Thoroughly inspect the radiator and heater core for corrosion. ket can cause the O2 sensor to become inoperative, Test the radiator and heater core for coolant flow rate. replace if necessary. Check for bent or damaged fins. Radiator performance is deteriorated by reduced flow from ANY CYLINDER HEAD GASKET INSTALLATION corrosion and contaminates. Radiator performance is also SHOULD INCLUDE THE FOLLOWING CHECKS: deteriorated by reduced heat transfer that can occur with • Radiator flow and corrosion condition. •All coolant hoses minor corrosion and slight loss of flow. To ensure proper for deterioration •Thermostat operation •Fan belt tension engine performance, replacement of the radiator and heater •Water pump flow •Radiator thermostatic fan switch op- core is recommended using OEM equivalent components eration •Antifreeze mixture •Radiator cap that maintains only. rated pressure •Coolant reservoir fill level •Ignition timing Replace O-rings on the coolant supply pipes that connect to setting •Emission controls •Vacuum leaks •Restriction in the water pump.
    [Show full text]
  • United States Patent 19 L L 3,948,227 Guenther 45) Apr
    United States Patent 19 l l 3,948,227 Guenther 45) Apr. 6, 1976 54 STRATIFED CHARGE ENGINE 57 ABSTRACT 76 Inventor: William D. Guenther, R.R. 2, An apparatus for applying a stratified charge to a re Hagerstown, Ind. 47346 ciprocating internal combustion engine is disclosed. 22 Filed: Mar. 8, 1974 The apparatus comprises a cylindrical rotary valve body disposed for rotation within the head of an inter 21 ) Appl. No.: 449,241 nal combustion engine. The valve body defines dia metrically extending inlet and exhaust passages which, 52 U.S. C. ....... 123/32 SP; 123175 B; 123/190 A; during rotation of the valve body, place a cylinder of 123/190 B; 123/190 BD; 123/80 BA the engine in sequential communication with an inlet 5 i Int. Cl........................ F02B 19/10; FO1 L7/00 manifold and an exhaust manifold secured to the 58) Field of Search........... 123/32 ST, 32 SP, 75 B, head. The inlet manifold comprises a double-passage 123/80 BA, 33 VC, 190 R, 190 B, 190 BB, gallery for transporting a lean fuel/air charge in a first 190 BD, 190 D, 190 C, 127 passage and a rich fuel/air charge in a second passage. Rotation of the inlet passage into communication with (56) References Cited the cylinder also brings the inlet passage into sequen UNITED STATES PATENTS tial communication with the first throat and then the 194,047 8/1877 Otto.................................. 123,175 B second throat for transporting the first lean charge 1,594,664 8/1926 Congellier......................... 123,175 B and then the second rich charge to the cylinder.
    [Show full text]
  • Gruvlok Gasket-Styles
    TECHNICAL DATA SHEETS TECHNICAL DATA SHEETS GRUVLOK GASKET-STYLES Gruvlok offers a variety of pressure responsive gasket styles. Each serves a specific function while utilizing the same basic sealing concept. Proper installation of the gasket compresses the inclined gasket lips on the pipe O.D., forming a leak tight seal. This sealing action is reinforced when the gasket is encompassed and compressed by the coupling housings. The application of internal line pressure energizes the elastometric gasket and further enhances the gasket sealing action. “C” STYLE The “C” Style cross section configuration is the most widely used ® gasket. It is the gasket style provided ROUGHNECK as standard in many Gruvlok Couplings This “C” style gasket is (Fig. 7000, 7001, 7003, 7004HPR, 7307, similar in appearance 7400 and 7401). Grade “E” and “T” are standard grades while other grades and design to the are available for special applications. Standard gasket but is only used with Fig. 7005 ™ END GUARD Roughneck Couplings The projecting rib fits between the ends and Fig. 7305 HDPE Couplings. The Roughneck gasket is wider, which allows of lined pipe to prevent damage to for minor pipe end separation as line pressure sets the grippers into the unprotected pipe ends during coupling plain end pipe. joint assembly. The E.G. gasket is provided as standard with the Fig. 7004 E.G. Coupling. REDUCING COUPLING Grade “E” and “T” gaskets are available. The centering rib allows for pipe positioning and serves FLUSH GAP™ to keep the smaller pipe from telescoping during installation. Designed to prohibit contaminates Used only with the Fig.
    [Show full text]
  • Kit Name: KM4 729989-13100 Muffler Kit 1 1 129944-13520
    Kit Name: KM4 YANMAR CO., LTD. YANMAR AMERICA CORP. Item Part No. Description Quantity Remarks 729989-13100 Muffler Kit 1 1 129944-13520 Muffler Kit 1 2 129944-13660 Stay, muffler 1 3 129930-13201 Gasket, Muffler 1 4 123925-13600 Pipe Assy, Tail 1 5 129989-13660 Bracket, muffler 1 6 26306-080002 Nut, M8x1.25 (Flanged hex head) 10 7 26106-080202 Bolt, M8x1.25 - 20 (Flanged hex head) 8 7 5 MODELS 4TNV98-GGE 4TNV98-NSA 1 4TNV98-ZNSA 4 6 3 6 2 7 Notes: Parts code is not assigned to non-serviceable component parts. Remarks: KM4 - MUFFLER KIT PAGE 1 OF 2 INS-KM4-0011 YANMAR CO., LTD. YANMAR AMERICA CORP. Installation Instructions WARNING: DO NOT INSTALL THE KIT WHILE THE ENGINE IS STILL HOT Hand tighten all bolts and nuts until the assembly is completed, then torque to the specifications in Table 1 below. 1. Place the exhaust gasket included with the engine on the exhaust manifold flange studs. 2. Mount the Muffler (1) on the exhaust manifold flange studs so that the outlet faces the radiator, secure using the M8x1.25 flange nuts (6). NOTE: For Step 3, if the Yanmar radiator kit is already installed on the engine it will be necessary to remove the upper mounting bracket from the cylinder head to install the Muffler Bracket (5) for the Muffler. 3. Fasten the Muffler Bracket (5) and the upper radiator mount to the cylinder head using the provided M8x1.25 - 20 bolts 4. Mount the Bracket Stay (2) to the cylinder head and Muffler (1) using the M8x1.25 - 20 bolts (7).
    [Show full text]