DOCSLIB.ORG

Dual-Zone Heated Blanket

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Dual-Zone Heated Blanket Dual-Zone Heated Blanket He lIkeS It warm, she lIkeS It warmer 736542_INS_NAP Heated Blanket Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk Table of conTenTs Warnings Cautions and FCC . 2 Set Up and Operation . 6 Cleaning and Storage . .10 Troubleshooting . .12 Warranty . 17 1 CAUTIon • TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER . THERE ARE NO SERVICEABLE PARTS INSIDE . • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE . The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock . The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit . IMPoRTanT SAFETY INSTRUcTIONS All the safety and operating instructions should be read, adhered to and followed before the unit is operated . save These InstrucTIons 2 736542_INS_NAP Heated Blanket Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk ImpoRTanT InstrucTIons! To operate this warming blanket properly and safely, there are some critical safety precautions you need to follow . As with all electrical appliances, there is an inherent danger of the blanket overheating or personal injury if the product is not used correctly . Please carefully read what follows before using the warming blanket . Never use this warming blanket with: • Infants or very small children • People with disabilities • Anyone who is immobile or cannot operate the controls properly • Anyone who is insensitive to heat (e .g . a person with poor circulation) • Anyone who cannot or will not understand these directions safety essenTIals when setting up • Never use this blanket near water or where it could be pulled into water . • Never trap or pinch any of the electrical cords in any way . Make sure the cords are NEVER routed between the mattress and box springs . • If the plug does not fit into the outlet correctly, contact a qualified electrician . • Be sure that the warming blanket power supply is used only with 120V, 60 HZ current supply . • Make sure the cord from the controller to the blanket is connected and locked tightly . 3 • NEVER use your blanket with an airbed, a pull-out sofa or a mechanically adjusted bed . • You may use this warming blanket with any sheets, mattress pads or other blankets but never in combination with any other warming blankets or electric mattress pads . • The heated area of the warming blanket should always lie flat on top of the mattress to prevent overheating . • The warming blanket should never be folded, balled up or bunched in any way when in use as it may result in overheating and/or permanent wrinkling of the fabric . • Never use pins in and around the warming blanket . • Cats, dogs and other pets should always be kept away from the blanket as their sharp claws may result in damage to the heating element . • Keep the controls away from drafty areas that may become damp or wet, such as an open window . • This product is not a heating pad . It will not feel warm to your hand’s touch . This blanket is for home use only—it is not intended for hotel or other institutional use . NOTE: tHIS BlANKET IS eNGINEERED tO PrOVIDe YOU WItH GeNTLE, RELAXING, ALL-NIGHt WARMTH. It IS NOt INTENDeD tO Be A SUBStItUTE FOr tHe PAIN-RELIeVING HeAt OF A HeAtING PAD. It WILL NOt FEEL HOt tO tHe tOUCH lIKE A HeAtING PAD. 4 736542_INS_NAP Heated Blanket Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk FCC noTIfIcaTIon This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonable protection against harmful interference in a residential installation . This equipment generates, uses and can radiate harmful interference to radio communications . However, there is no guarantee that interference will not occur in a particular installation . If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna . • Increase the separation between the equipment and receiver . • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected . • Consult the dealer or an experienced radio/TV technician for help . In accordance with the rules and regulations of the FCC, changes or modifications to this equipment, not expressly approved in writing by Brookstone, Inc . could void the user’s authority to operate this equipment . 5 seT up and oPeRaTIon Note: Queen or king blankets include an additional power supply and controller as each side operates independently. 1 . Place the blanket on the bed with the “Use and Care” instruction label right side up and at the foot of the bed . 2 . Place power supplies under the bed on the floor . See below for correct placement . Important: DO not tuck cords between the mattress and the box spring. 6 736542_INS_NAP Heated Blanket Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk 3 . Place the controllers on or near the head of the bed . See example below . fPo 4 . Attach the connector cords from the controllers to the connectors at the foot of the blanket . Do not tuck cords between the mattress and the box spring . Run them under the bed on the floor . See example below . 7 5 . Plug in the power supply cords . You may use a properly rated UL listed power- strip extension cord if needed . 6 . Choose your heat setting . The higher the number chosen – the warmer the heat . See below for example . Higher Lower 7 . Push the on/off button to turn on . The blanket will go into the “pre-warm mode” and will continue to pre-warm until it reaches your dial setting . The blanket will then continue to heat at your dial setting all night . Notes: • When ON and operating properly, the controller will be slightly warm to the touch. the higher the dial setting, the warmer it will be. this is completely normal and safe. • The power supply or transformer will be warm to the touch when the blanket is in use and slightly warm when the blanket is off. this is normal. 8 8 . If you wish your bed to be extra warm when you first get into it, you may turn on the blanket approximately 30 minutes before retiring (or longer, if you wish even more warmth) with the dial set at HI . Then reset the dial to your desired all-night warmth level . 9 . You may adjust the dial setting at any time and the automatic pre-warm feature will not reactivate . However, if you push the controller button OFF or unplug any of the wires, the blanket will turn OFF . The automatic pre-warm feature is again activated upon startup . 10 . To turn the blanket OFF, push the on/off button on the controller . 9 CLEANIng AND sToRAGE ImPORTANt: • NeVer dry clean this blanket! • NeVer use bleach when washing this blanket! • NeVER put this blanket through a wringer! machine Washing Disconnect all cord(s) from the blanket . Place your blanket in a top-load washing machine and fill the tub with warm water . Add a small amount of detergent and then let soak for 5 minutes . Agitate on the delicate or gentle cycle for 2 minutes . Spin on normal speed . Fill the tub for a cool rinse . Agitate for one minute and spin dry . Hand-Washing Washing your blanket by hand is the best way to make it last . To do this, disconnect all cord(s) from the blanket . Wash your blanket separately by hand in a tub of lukewarm (100°F) water using a small amount of mild laundry soap or detergent . Soak the warming blanket for 5 minutes . Next, gently work the blanket up and down for 5 more minutes . NEVER rub or scrub roughly . Rinse thoroughly in cool water until all traces of soap or detergent are gone . Squeeze excess water out by hand by starting at one end and working your way to the other . Important! NeVER twist the warming blanket to squeeze out excess water. ImPORTANt! • NeVer use commercial dryers at the laundromat to dry the warming blanket–they may be extra hot and the heat could damage the wires. • NeVer plug in your warming blanket while damp. • NeVer iron the warming blanket. 10 736542_INS_NAP Heated Blanket Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk machine Dry To machine dry, put your warming blanket into a dryer on low heat and allow to tumble until dry . Make sure that your blanket has enough room to tumble freely . line Dry You can line dry your warming blanket simply by draping the warming blanket over two parallel clotheslines or a shower rod with the head and foot ends down . STORAGE • Store away as you would any other blanket, folded in a dry place . • Always turn off the electric current when the blanket is not in use, either by turning off the controller or unplugging the power supply from the wall outlet . • Wrapping the cord around the controls may damage the cord . Loop loosely when storing . • Never use dry cleaning fluid on this blanket as cleaning solvents may damage the wiring insulation . 11 TRoUbleshooTIng Issue SOlUtion The lamp on my controller Make sure that all the wire connections does not light up .
Load more

Recommended publications
  • What to Expect with My New Mattress
    What To Expect With a New Set of Bedding Expect An Adjustment Period. Just as your new dress shoes take some time to feel good, your new mattress might take some time for your body to become adjusted. This is especially true if you are changing from a very old bed set, a damaged bed set, or a poor quality bed set. This is also true if you are changing “comfort” levels, for example moving from a firm to a new fluffy pillow top mattress. It can take days or weeks for your body to adjust to a new mattress. Slight Comfort Impressions Are Normal. You can expect your mattress to develop slight indentations called “body impressions” as soon as you start sleeping on it. These slight indentations are normal and are the result of the quilt and upholstery layers settling and conforming to your individual body. As these layers compress, the mattress will actually improve in performance. True sagging resembles the dipping look of a hammock in which the dip measures greater than 1 1/2 inches. While slight body impressions are normal, they are usually not greater than 1 1/2 inches in depth and are therefore not reason to exchange your mattress under warranty. Although most mattresses now only have one sleep surface, your mattress may benefit in comfort and durability if it is rotated regularly (clockwise). Visible Ridge Down The Middle Is Normal. When two people share a bed, they usually each sleep on one side therefore settling the layers of comfort on each side. Often times, there is a visible ridge down the middle of a king or queen bed where the comfort layers have not been compressed.
    [Show full text]
  • Bedding Claim Information
    Your continued comfort is important to us! A “bedding claim form” is a document required by the manufacturer of your bed to provide them with detailed information necessary to determine if your mattress has a defect within the warranty guidelines. A bedding claim form is required for the following Bedding Vendors: Aireloom, Omaha Bedding, Sealy, Serta, Simmons, Southerland and Stearns and Foster. *If you have moved outside of our normal delivery zones, please contact the manufacturer for warranty assistance. (This excludes Omaha Bedding customers please continue to follow the NFM claim form).* Please note: If you have a Tempur-pedic, Land and Sky, or Kingsdown, please contact the vendor directly for assistance with your warranty. Getting Started on your Bedding Claim Form To begin the process, please contact our customer service at 1-800-544-5349. We would like to help you determine if the concern you are experiencing would require a bedding claim form to be filled out or not. You will be provided a reference number for your claim form as well. If customer service has determined a claim is required, please fill out a bedding claim form including all required pictures (examples will be provided in this document). The bedding vendors have requirements for your mattress to qualify for the warranty. Here are some of the requirements: o You must have matching mattress and box springs (both must be of the same vendor purchased at the same time unless one piece was a previous warranty replacement), unless you have a platform bed. o You must have the law label for the mattress and box springs (it does not have to be on the mattress and/or box springs, but you must have it present) o You must have a proper frame (please see below for a list of a few acceptable frames) o Your mattress and box spring must be free of any and all stains, soilage, dirt, and/or debris o Warranties do not cover comfort issues.
    [Show full text]
  • Congratulations on Your New Beautyrest® Mattress!
    CONGRATULATIONS ON YOUR NEW BEAUTYREST ® MATTRESS! To receive service under the terms of the warranty, contact your original Beautyrest® dealer. If the dealer is no longer in business or you have moved outside its service area, see below to contact Simmons Consumer Services. USAGE INSTRUCTIONS PROPER USE Use a supportive, rigid, non-yielding foundation to support your mattress, preferably by purchasing the matching Beautyrest® or Simmons® foundation. An old foundation unit may not provide sufficient support. Likewise an older frame (with or without an appropriate foundation) may not provide sufficient support. If used with a foundation, use a frame that provides rigid center support as well as support for the head, foot, and sides. For any queen or king frame that does not have a metal center support, you must use at least 5 hardwood or metal slats (1” x 4”) and add legs to the 3 center slats. By not providing a sufficient supportive frame, damage can occur to the product that will void your warranty. If used without a foundation (e.g. with a platform bed), add a solid platform on top of any open slatted mattress support system in which the spaces between the slats are greater than 2 inches (5 centimeters). Hardboard, plywood, particleboard or a similar material, inserted between the mattress and the slatted platform, supporting the entire surface of the mattress will provide appropriate support. Use of an open slatted mattress support system in which the spaces between the slats are greater than 2 inches (5 centimeters), without the addition of a solid platform, will damage your mattress and void your warranty.
    [Show full text]
  • Mattress Protector Introduction
    MATTRESS PROTECTOR INTRODUCTION Guardian Protection Products is proud to introduce our new Micro Fleece Mattress Protector. Guardian Micro Fleece Mattress Protector Features: • Soft Comfortable, Fleece Top Fabric. • Designed for all mattresses including latex, memory foam and pillow-top. • Whisper Quiet Breathable Moisture Barrier that protects against dust mites, dust and dander. • Excellent Liquid Repellency and Stain Release • Fits Mattresses up to 15” deep or 22” deep • 10 Year Stain Protection Warranty for the Mattress Protector • 10 Year Stain Protection Warranty for the Mattress when purchased with a Mattress Protector. • 10 Year Warranty for manufacture construction defects. • Made in the USA Why Do Your Bedding Customers Need a Guardian Mattress Protector? 1. Guardian realizes that buying a new premium set of bedding is an important decision your customers don’t take lightly and have probably been thinking about for quite some time. 2. The average person spends approximately a third of their day in bed. 3. Based on customer feedback Guardian knows they are concerned with keeping their new mattress clean and fresh for many years to come. 4. Bodily fluids and dead skin cells we loose while sleeping can infiltrate the mattress top creating an unhealthy sleep environment. 5. It is the best way to ensure their new sleep set stays fresh and stain-free, which helps maintain the valuable manufacturer’s warranty. 6. Investment Protection. Guardian’s 10-year full-replacement warranty protects the investment the customer has made in a premium set of bedding. 7. You can’t wash a stained or soiled mattress. You can a Guardian Mattress Protector.
    [Show full text]
  • Pressure Management
    Pressure Management Superior comfort Unsurpassed quality Manufactured for durability When choosing a pressure management / redistribution product there are many design features and therapy options to consider. GF Health Products, Inc. offers a complete line of support surfaces and patient positioning products utilizing the features and functions shown here as well as many other options. Defined Perimeter (optional) for patients likely to fall out of bed or exit the bed without assistance Firm edge support Multiple layer aids in fall prevention construction enhances during ingress / egress durability, comfort and immersion Immersion: Depth of penetration (sinking) into a support surface. Immersion is a key function to obtain optimal pressure redistribution. Immersion No-Immersion Low Air Loss: A feature of a support surface that provides a flow of air to assist in managing the heat and humidity (microclimate) of the skin. Available on models 750000, 760000S, 770000S Alternating Pressure: A feature which uses air-filled channels that alternately fill and empty to keep bearing weight off bony prominences of immobilized or weak patients who are unable to shift their weight frequently. Available on 14025, 750000, 760000S, 765000S, 770000S Bottom-out Prevention Technology with patented cell-on-cell technology Operating Alternation Mode... Bottom cells kept inated through shut-o valves for at least 8-hours! During Power Failure... Shut-o Valves Available on models 760000S and 765000S www.grahamfield.com S300 Series Foam Mattress The Simmons Clinical
    [Show full text]
  • The Burnnet News February 2018, Volume 37, No
    Firefighters Burn Institute Regional Burn Center University of California – Davis Medical Center 2315 Stockton Boulevard, Pavilion 2 – Burn Unit Sacramento, CA 95817-2201 Burn Outreach (916) 734-5596 The BurnNet News February 2018, Volume 37, No. 2 ------------------------------------------------------------------------------------------------------------- BURNNET SURVIVORS MEETING Thursday, February 1, 7:30-9:30pm The BurnNet Survivors meet monthly to discuss issues and raise questions related to burns. Burn survivors, family members and significant others are invited, For more information, call (916) 734-5596. Tower DCR North 1204 – First floor, near West Entrance ARE YOU RECEIVING THE BURNNET NEWS VIA E-MAIL? Would you like to be on the mailing list to receive The BurnNet News every month? Email Deb Jones RN at [email protected] You can also find The BurnNet News at our website: www.ucdmc.ucdavis.edu/burncenter/newsletter/index.html UPCOMING EVENTS JANUARY 27 44th ANNUAL GUINS & HOSES FOOTBALL GAME Presented by Pig Bowl, held at Cal State Sacramento, 6000 J Street, Sacramento Annual Charity Football Game: Sacramento Area Firefighters vs. Sacramento Law Enforcement. www.pigbowl.org FEBRUARY 8-11th ANNUAL FIREFIGHTERS “FILL THE BOOT FOR BURNS” BOOT DRIVE Sunrise Mall, corner of Greenback and Sunrise in Citrus Heights. Want to volunteer to help? Contact Peri Henderson at 916-739-8525 or Deb Jones RN at 916-734-5596. FREE Safety Fair for the community on Saturday! MARCH 3TH ANNUAL FIREFIGHTERS MARDI GRAS CRABFEED – SAVE THE DATE! St. John Vianney Parish, 10497 Coloma Road, Rancho Cordova 5:30 p.m. No Host Cocktails. 6:30 p.m. Dinner is served. Each $55 ticket entitles you to all-you-can-eat fresh green salad, bread, Cajun Boil, delicious cracked Dungeness crab and dessert.
    [Show full text]
  • Catalog 13.2 MALOUF FINE LINENS®
    CATALOG 13.2 MALOUF FINE LINENS® ™ • Malouf Italian Collection 5 • Convolution with Memory Foam Core Pillow 42 ™ • 600 TC Egyptian Cotton Sheet Set 6 • Gelled Microfiber Pillow 43 ™ • 600 TC Egyptian Cotton Pillowcases 6 • Gelled Microfiber + Memory Foam Pillow 43 ™ • • 400 TC Egyptian Cotton Sheet Set 9 Aeration Pillow 45 ™ • • 400 TC Egyptian Cotton Pillowcases 9 Nanobead Pillow 45 ® • Z Wedge 45 • 200 TC Cotton Percale Hotel Sheet Set 10 • Travel Neck Pillow 46 • 200 TC Cotton Percale Pillowcases 10 • Travel Contour Pillow 47 • 200 TC Cotton Percale Duvet Cover 10 • Travel Pillow 48-49 • Flannel Sheet Set 13 • • Flannel Pillowcases 13 • 300 TC Premium Cotton Blend Sheet Set 14 STRUCTURes™ by MALO uf • 300 TC Premium Cotton Blend Pillowcases 14 ™ • HighRise Bed Frame 52 • Satin Sheet Set 17 ™ • HighRise Headboard Brackets 53 • Satin Pillowcases 17 ® • Steelock Bed Frame 55 • 90 Gram Brushed Microfiber Sheet Set 18 ® • Steelock Headboard Footboard Bed Frame 55 • 90 Gram Brushed Microfiber Pillowcases 18 ™ • Universal Adjustable Bed Frame 56 • Gelled Microfiber Down-Alternative Comforter 21 • Queen/Full/Twin Adjustable Bed Frame 56 • Full/Twin Adjustable Bed Frame 56 SLEEP TITE™ BY MALOUF • Footboard Extensions 58 • Bolt to Hook Converter 58 ® • Quilt Tite Waterproof Mattress Pad 23 • Bed Risers 59 ™ • Sleep Tite Mattress Pad 23 • King / Queen / Vertical Modi Plates 61 ® • Encase Mattress Protector 24 ® • Encase Pillow Protector 24 ® • Encase Box Spring Protector 25 ISOLus™ SL eep PROD UCTS ® • Five 5ided Mattress Protector 27 • 2.5” Latex Foam Mattress Topper 63 ™ • Sleep Tite Mattress Protector 29 • 2.5” Liquid Gel Memory Foam Mattress Topper 63 ™ • Sleep Tite Pillow Protector 29 • 2” Memory Foam Mattress Topper 65 • 2.5” Gel Memory Foam Mattress Topper 65 Z ® by MALO uf ® ™ • Gel Dough Memory Foam + Z-Gel Pillow 33 P.O.P.
    [Show full text]
  • Dualtemp™ Individual Layer User Guide Available Here
    ™ USER GUIDE WARNING: Read all instructions before use to avoid injury. Improper use of product can result in serious injury or death. Follow the safety information in this user guide. Keep this user guide for future reference. Welcome to ™ Tonight, you’re in control of better sleep. Get to know your DualTemp™ layer. On the following pages, you’ll find what’s included, step-by-step assembly instructions, and tips for sleeping better from the first night. So, let’s get started. • Place your DualTemp™ layer on top of your mattress pad. • Tuck the DualTemp™ layer’s attachment flaps snugly underneath your mattress for a nice, flat fit. This will give your layer stability and hold it in place throughout the night. • Once you’ve completed assembly, place a fitted sheet over the DualTemp™ layer and finish making your bed. Use a blanket or comforter to help the DualTemp™ layer maintain your desired bed temperature. To get your best night’s sleep on your new DualTemp™ layer: • 20 minutes before bed, use your remote to turn on the DualTemp™ layer and choose the level of cooling or warming that fits you best. Adjust the temperature as needed. • Set the timer in one-hour increments, up to nine hours. • Keep your room at 72° or lower for optimal cooling. Now relax and enjoy the soothing effects of sleeping at just the right temperature — and wake refreshed in the morning. 3 YOUR DUALTEMP™ LAYER INCLUDES air outlet Heating and Cooling Source Remote Power Supply Power Cord batteries included DualTemp™ Layer can be used on either side of the bed hose hose connector attachment fl ap 4 CAUTION: Dispose of all packaging as it can create choking hazards to small children or pets.
    [Show full text]
  • 159 Home Goods Auction in Denton, TX 2/18/2021
    09/29/21 12:12:00 ID: 159 Home Goods Auction In Denton, TX 2/18/2021 Auction Opens: Fri, Feb 12 6:00pm CT Auction Closes: Thu, Feb 18 6:45pm CT Lot Title Lot Title AHG0218001 Magicfly Mini Sewing Machine for Beginner, AHG0218012 GeeMo Cordless Vacuum Cleaner 21Kpa Super- Dual Speed Portable Sewing Machine Machine Suction 35 mins-Running 1.2L Super-Capacity with Extension Table, Light, Sewing Kit for 4 in 1 Vacuum Cleaner for Deep Clean Pet Hair Household, Travel MSRP $39.99 Carpet Hard Floor G201 MSRP $94.99 AHG0218002 iTouchless 14 Gallon Sliding Lid Automatic AHG0218013 Mini Fridge 6 Liter AC/DC Portable Beauty Sensor Trash Can with Odor Filter System, 53 Fridge Thermoelectric Cooler and Warmer for Liter Stainless Steel Touchless Kitchen Garbage Skincare, Bedroom and Travel (Mirror & LED Bin MSRP $84.99 Design) MSRP $50.99 AHG0218003 GUKA Jewelry Box for Women, Jewerly CaseAHG0218014 LEVOIT HEPA Air Purifier for Home, Smoke with 2 Drawers, Leather Design Lockable Cleaner w/Dual Activated Carbon Filter for Jewelry Case with Mirror, Travel Case, for Bedroom Office Dorm, 100% Ozone Free, Necklaces Earrings Rings Watches Storage Reduce 99.9% Allergy Dust Pollen Pet Dander, Case, Women Gift MSRP $30.99 (Available for California) MSRP $103.99 AHG0218004 Rubbermaid 13G Premium Gunmetal Blue Step-AHG0218015 Casper Sleep Pillow for Sleeping, Standard, On Trash Can MSRP $32.99 White MSRP $59.99 AHG0218005 AcuRite Wireless Home Station (01536) with 5-AHG0218016 Thermee Micro Flannel Electric Blanket, Sage, 1 Sensor and Android iPhone Weather Queen
    [Show full text]
  • NPR) to Amend the Standard for the Flammability of Mattresses and Mattress Pads (Standard), 16 CFR Part 1632
    This document has been electronically UNITED STATES approved and signed. CONSUMER PRODUCT SAFETY COMMISSION 4330 EAST WEST HIGHWAY BETHESDA, MD 20814 DATE: September 30, 2020 BALLOT VOTE SHEET TO: The Commission Alberta E. Mills, Secretary THROUGH: John G. Mullan, General Counsel Mary T. Boyle, Executive Director FROM: Mary A. House, Acting Assistant General Counsel, Regulatory Affairs Daniel R. Vice, Attorney, Regulatory Affairs SUBJECT: Notice of Proposed Rulemaking: Standard for the Flammability of Mattresses and Mattress Pads; Proposed Amendment BALLOT VOTE DUE ____________________________Tuesday, October 6, 2020 Staff is forwarding a briefing package to the Commission, recommending that the Commission publish in the Federal Register the attached draft notice of proposed rulemaking (NPR) to amend the Standard for the Flammability of Mattresses and Mattress Pads (Standard), 16 CFR part 1632. The Standard sets forth a test to determine the ignition resistance of a mattress or mattress pad when exposed to a lighted cigarette. It currently requires the use of Standard Reference Material cigarette SRM 1196 as an ignition source. The National Institute of Standards and Technology (NIST), the former sole supplier of SRM 1196, has exhausted its supply of SRM 1196, and is unable to procure more of these cigarettes. NIST has replaced SRM 1196 with SRM 1196a. The draft NPR proposes to amend the Standard to replace SRM 1196 with SRM 1196a as the ignition source in the Standard. The Office of the General Counsel is providing the attached draft NPR for the Commission’s consideration. Please indicate your vote on the following options: I. Approve publication of the attached document in the Federal Register, as drafted.
    [Show full text]
  • Inter-Residence Hall Council Dear Families, Congratul
    NYU Inter-Residence Hall Council 726 Broadway, 7th Floor New York, NY 10003 Welcome Home To: Family/Family Members of incoming New York University Students From: Inter-Residence Hall Council Dear Families, Congratulations on your student’s acceptance to New York University. We are very excited to welcome your family and look forward to meeting you and your student this fall. As a family of an incoming student, there is something very important we wanted you to know before the residence hall move-in date: Standard linens WILL NOT FIT the beds at New York University. Fortunately, New York University has formed an exclusive partnership with OCM - an outfitter of residence hall rooms serving nearly 1,000 colleges and universities nationwide. OCM has a 20 year reputation for high quality, value, convenience and customer service. In fact, OCM provides sheets that are guaranteed until graduation. From your student’s first day of class until the day they graduate, anything you purchase can be returned for a full refund, no questions asked. OCM has created custom ‘Value Paks’ which provide incoming students with everything they need for residence hall life. This year’s brochure includes four ‘Value Paks’ with over 40 color combinations for you to choose from. It’s simply the most convenient way to save time and money without sacrificing value or selection. Last year, over 70% of buyers chose one of these ‘Paks.’ This year, we have additional discount opportunities for New York University students: – FREE Shipping with any ‘Value Pak’ Onsite pick-up will be available on NYU Welcome Day / Move-In Day, Sunday August 25th from 8am-6pm next to the NYU Kimmel Center.
    [Show full text]
  • Bioclinic Positioners and Surfaces Catalog
    BioClinic Positioners and Surfaces Catalog transforming wound management BioClinic Program Offering Since 1976, BioClinic has been a leader in design of innovative, quality mattresses, overlays and positioners for patients in all care settings. Our diverse foam product line truly offers something for every patient and is supported by the long- respected Joerns Healthcare name. At Joerns Healthcare we can think of no better way of supporting our customers than by staying focused on the philosophy that built our business: to re-define the environment in which care is delivered. This catalog displays the entire BioClinic line from positioners to cushions to therapeutic support surfaces. You will find that all our BioClinic products are latex free and have options to meet required safety and fire standards. This year, we are proud to announce the launch of our new BioClinic surfaces featuring three tiers of quality foam mattresses, encompassing the needs of any buyer. Combining quick shipment, industry-leading depth of offering and our widely-acclaimed customer service, you will find that Joerns Healthcare is a partner you can rely on. We understand that today’s marketplace is more competitive than ever before. As our partner, you will have access to some of the industry’s best foam products, and you may also see added value in your bottom line. We offer what you need, at a competitive price. We stay competitive to keep you competitive. And in today’s marketplace, that is a partnership designed for success. 2 • BioClinic Positioners and Surfaces
    [Show full text]