Coils and Sheets METINVESTHOLDING.COM METINVESTHOLDING.COM

1 CONTENT

HOT ROLLED STEEL GALVANIZED ROLLED STEEL

Ferriera Valsider Ilyich Steel European standards 04 CIS standards 21 American standards 05 European standards 21 American standards 21 Ilyich Steel CIS standards 07 Unisteel European standards 11 Partner American standards 13 CIS standards 22 Japanese standards 13 European standards 22 Zaporizhstal Joint Venture Contacts 23 CIS standards 14 European standards 16

COLD ROLLED STEEL

Ilyich Steel CIS standards 17 European standards 18 American standards 18

Zaporizhstal Joint Venture CIS standards 19 European standards 20

WIND FARM ASPHALT TANKERS USA Wind farm for one of the world top manufacturer of wind turbines The world`s two largest asphalt takers the T.Esra and GAMESA Corporation. T.Aylin. Each tanker is 156.5 m long and 25 m wide. Metinvest steel used: coils and sheets Metinvest steel used: coils and sheets 02 03 FERRIERA VALSIDER FERRIERA VALSIDER

European standards American standards

Standard Standard Standard for steel Thickness, Width, Delivery Standard for steel Thickness, Width, Delivery Applications for technical Steel grade Applications for technical Steel grade Hot rolled steel rolled Hot grade mm mm condition grade mm mm condition specifications specifications 30MnB5 Grade A 3.0-8.0 Alloy rolled steels 27MnCrB5-2 ASTM A285/A285M ASTM A285/A285M Grade B 1,000-1,555 for quenching and EN 10083-3 EN 10083-3 3.0-20.0 1,000-1,555 AR 3.0-15.0 33MnCrB5-2 Boiler and Grade C tempering pressure vessel 34CrMo4 plates Grade 55 3.0-12.0 Flat products of P235GH ASTM A516/A516M ASTM A516/A516M Grade 60 1,000-1,555 3.0-8.0 steels for pressure EN 10028-2 EN 10028-2 3.0-12.0 1,000-1,555 N Grade 65 P265GH purposes Carbon ASTM A36/A36M ASTM A36/A36M ASTM A36/A36M 3.0-20.0 1,000-1,555 С35 structural steel AR С35R Low and mid- Grade C 3.0-15.0 C35E low tensile ASTM A283/A283M ASTM A283/A283M 1,000-1,555 C40 strength carbon Non-alloy rolled steel Grade D 3.0-12.0 for quenching and EN 10083-2 EN 10083-2 C40E 3.0-20.0 1,000-1,555 AR steel plates tempering C45 Low-alloy C45R columbium ASTM A572/A572M ASTM A572/A572M Grade 42 Type 1 3.0-20.0 1,000-1,555 structural steel C45E B 28Mn6 X42 S235JR; S235J0; S235J2 API 5L PSL1 X46 AR Non-alloy structural S275JR; S275J0; X52 EN 10025-2 EN 10025-2 2.0-20.0 1,000-1,555 AR, N, M steels S275J2 X60 3.0-15.0 S355JR; S355J0; BM Rolled steel for S355J2; S355K2 API 5L X42M 1,000-1,555 piping products Normalized products P275NH X46M M of steels for pressure EN 10028-3 EN 10028-3 P275NL1 3.0-8.0 1,000-1,555 N X52M API 5L PSL2 purposes P275NL2 X60M S355J0WP BN 3.0-12.0 3.0-10.0 Structural steel S355J2WP X42N N with improved EN 10025-5 EN 10025-5 S355J0PW 1,000-1,555 AR, N X46N 3.0-6.0 atmospheric corrosion resistance S355J2W 3.0-15.0 SS Grade 30 S355K2W SS Grade 33 S315MC 3.0-5.0 SS Grade 36 Thermomechanical S355MC 3.0-15.0 Type 1 rolled steels for cold EN 10149-2 EN 10149-2 1,000-1,555 M SS Grade 36 forming S420MC 3.0-12.0 Type 2 S460MC 4.0-6.0 3.0-6.0 S275M 3.0-12.0 SS Grade 40 S275ML 3.0-8.0 SS Grade 45 Type 1 S355M 3.0-15.0 SS Grade 50 Thermomechanical S355ML rolled weldable fine EN 10025-4 EN 10025-4 1,000-1,555 M SS Grade 55 S420M 3.0-10.0 grain structural steel SS Grade 60 S420ML HSLAS Grade 45 S460M 4.0-6.0 Class 1 S460ML Rolled steel with improved ASTM A1011/A1011M ASTM A1011/A1011M HSLAS Grade 45 1,000-1,555 AR formability Class 2 Dimensions and technical requirements should be agreed during the conclusion of contracts. HSLAS Grade 50 AR – as rolled, N – after normalizing rolling, M - thermomecanically rolled. Class 1 HSLAS Grade 50 Class 2 HSLAS Grade 55 Class 1 3.0-12.0 HSLAS Grade 55 Class 2 HSLAS Grade 60 Class 1 HSLAS Grade 60 Class 2 HSLAS-F Grade 50

HSLAS-F Grade 60 METINVESTHOLDING.COM

04 05 FERRIERA VALSIDER ILYICH STEEL

American standards CIS standards

Standard Standard Standard for steel Thickness, Width, Delivery Standard for steel Thickness, Width, Delivery Applications for technical Steel grade Applications for technical Steel grade Hot rolled steel rolled Hot grade mm mm condition grade mm mm condition specifications specifications HSLAS Grade 45 1.2-1.7 1,000-1,050 Class 1 1.8 1,000-1,150 HSLAS Grade 45 1.9 1,000-1,250 Class 2 HSLAS Grade 50 St1kp; St1ps; 2.0 1,000-1,290 Class 1 St1sp; St2kp; 2.1-2.7 1,000-1,310 HSLAS Grade 50 St2ps; St2sp 2.8-2.9 1,000-1,400 Class 2 3.0-3.4 1,000-1,450 HSLAS Grade 55 Class 1 6.0-12.0 3.5-3.7 1,000-1,480 HSLAS Grade 55 3.8-3.9 1,000-1,500 Structural Class 2 1.35-1.6 1,000 rolled steel ASTM A1018/A1018M ASTM A1018/A1018M HSLAS Grade 60 1,000-1,555 1.7-1.8 1,000-1,150 with improved Class 1 formability 1.9 1,000-1,200 HSLAS Grade 60 Class 2 2.0-2.4 1,000-1,250 DSTU 2651/GOST 380 St3kp; St3ps; HSLAS-F Grade 50 2.5-2.7 1,000-1,310 St3sp HSLAS-F Grade 60 2.8-2.9 1,000-1,330 SS Grade 30 3.0-3.4 1,000-1,380 SS Grade 33 3.5-3.7 1,000-1,430 SS Grade 36 3.8-3.9 1,000-1,480 Type 1 6.0-20.0 AR SS Grade 36 2.0-2.4 1,000 Type 2 2.5-2.8 1,000-1,060 St4ps; St4sp SS Grade 40 3.0-3.4 1,000-1,200 Structural steel Grade 58 3.0-12.0 3.5-3.9 1,000-1,250 of improved ASTM A573/A573M ASTM A573/A573M 1,000-1,555 toughness Grade 65 3.0-10.0 2.0-2.4 1,000-1,000 Structural steel 2.5-2.8 1,000-1,060 Carbon steel for St5ps; St5sp with improved DSTU 2834/GOST general appli- 3.0-3.4 1,000-1,200 AR atmospheric ASTM A242/A242M ASTM A242/A242M A242 Type 1 3.0-12.0 1,000-1,555 16523 cation 3.5-3.9 1,000-1,250 corrosion resistance 1.2-1.7 1,000-1,050 Grade 50 Type 3 1.8 1,000-1,150 Structural steel 3.0-12.0 Grade 50 Type 7 1.9 1,000-1,250 with improved ASTM A656/A656M ASTM A656/A656M 1,000-1,555 Grade 60 Type 3 formability 3.0-10.0 2.0 1,000-1,290 Grade 60 Type 7 08; 08ps 2.1-2.7 1,000-1,310 Grade A Structural steels 2.8-2.9 1,000-1,400 with improved ASTM A588/A588M ASTM A588/A588M Grade B 3.0-3.4 1,000-1,450 atmospheric Grade K 3.0-15.0 1,000-1,555 corrosion Grade 50W Type A 3.5-3.7 1,000-1,480 ASTM A709/A709M ASTM A709/A709M resistance Grade 50W Type B 3.8-3.9 1,000-1,500 1.8 1,000-1,150 Dimensions and technical requirements should be agreed during the conclusion of contracts. 1.9 1,000-1,250 AR – as rolled, N – after normalizing rolling, M - thermomecanically rolled. DSTU 7809/GOST 1050 2.0 1,000-1,290 2.1-2.7 1,000-1,310 10kp; 10ps; 10sp 2.8-2.9 1,000-1,400 3.0-3.4 1,000-1,450 3.5-3.7 1,000-1,480 3.8-3.9 1,000-1,500 FERRIERA VALSIDER 2.0-2.4 1,000-1,250 Annual capacity, t 2.5-2.7 1,000-1,310 2.8-2.9 1,000-1,330 15kp; 15ps; 15sp 750 000 3.0-3.4 1,000-1,380 Steckel 3.5-3.7 1,000-1,430

Mill 1600 3.8-3.9 1,000-1,480 METINVESTHOLDING.COM

06 Hot rolled coils 07 ILYICH STEEL ILYICH STEEL

CIS standards CIS standards

Standard Standard Standard for steel Thickness, Width, Delivery Standard for steel Thickness, Width, Delivery Applications for technical Steel grade Applications for technical Steel grade Hot rolled steel rolled Hot grade mm mm condition grade mm mm condition specifications specifications 2.0-2.2 1,000-1,180 1.8 1,000-1,150 2.3-2.4 1,000-1,230 1.9 1,000-1,250 2.5-2.7 1,000-1,280 2.0 1,000-1,290 20kp; 20ps 2.8-2.9 1,000-1,310 2.1-2.7 1,000-1,310

Carbon steel for 3.0-3.4 1,000-1,350 S185JR 2.8-2.9 1,000-1,400 DSTU 2834/GOST general appli- DSTU 7809/GOST 1050 3.5-3.7 1,000-1,400 AR 3.0-3.4 1,000-1,450 16523 cation 3.8-3.9 1,000-1,450 3.5-3.7 1,000-1,480 2.0-2.4 1,000 3.8-3.9 1,000-1,500 20; 25; 30; 35; 2.5-2.8 1,000-1,100 4.0-8.0 1,000-1,510 40; 45 2.9-3.2 1,000-1,200 1.35-1.6 1,000 3.3-3.9 1,000-1,250 1.7-1.8 1,000-1,150 St2kp; St2ps; 1.9 1,000-1,200 St2sp; St3kp; Carbon steel 2.0-2.4 1,000-1,250 GOST 14637 DSTU 2651/GOST 380 St3ps; St3sp; 4.0-8.0 1,000-1,510 AR Non-alloy struc- plates DSTU EN 10025-2 DSTU EN 10025-2 2.5-2.7 1,000-1,310 AR, N St3Gps; St3Gsp; tural steels St5ps; St5sp 2.8-2.9 1,000-1,330 10HSND; 15HSND 4.0-4.9 1,000-1,400 3.0-3.4 1,000-1,380 High strength DSTU 8541/GOST 10HSND; 15HSND 5.0-8.0 DSTU 8541/GOST 19281 AR 3.5-3.7 1,000-1,430 steel 19281 09G2; 09G2S; 1,000-1,500 4.0-8.0 S235JR, S235J0, 3.8-3.9 1,000-1,480 10HNDP S235J2 4.0-8.0 1,000-1,510 St1kp; St1ps; St1sp; St2kp; 2.0-2.2 1,000-1,180 St2ps; St2sp; 2.3-2.4 1,000-1,230 St3kp; St3ps; 2.5-2.7 1,000-1,280 St3sp; St4kp; Rhombic and GOST 8568 DSTU 2651/GOST 380 lentil corrugated St4ps; St4sp; 3.0-8.0 1,000-1,450 AR 2.8-2.9 1,000-1,310 steel 08ps; 08sp; 10kp; 3.0-3.4 1,000-1,350 10ps; 10sp; 15kp; 15ps; 15sp; 20kp; 3.5-3.7 1,000-1,400 20ps; 20sp 3.8-3.9 1,000-1,450 GOST 8568 DSTU 7809/GOST 1050 09G2S 4.0-8.0 1,000-1,510 2.0-2.2 1,000-1,060 2.0-2.2 1,000-1,060 2.3-2.4 1,000-1,120 2.3-2.4 1,000-1,120 2.5-2.7 1,000-1,160 2.5-2.7 1,000-1,160 Rolled high 09G2; 09G2S; GOST 17066 DSTU 8541/GOST 19281 2.8-2.9 1,000-1,200 AR Non-alloy struc- S355JR, S355J0, 2.8-2.9 1,000-1,200 strength steel 10HNDP DSTU EN 10025-2 DSTU EN 10025-2 AR, N 3.0-3.4 1,000-1,250 tural steels S355J2 3.0-3.4 1,000-1,250 3.5-3.7 1,000-1,310 3.5-3.7 1,000-1,310 3.8-3.9 1,000-1,400 3.8-3.9 1,000-1,400 08; 08kp; 08ps; 4.0-8.0 1,000-1,500 10kp; 10ps; 10sp; 4.0-8.0 1,000-1,510 Rolled products 15kp; 15ps; 15sp; 2.0-2.2 1,000-1,060 of high quality GOST 1577 DSTU 7809/GOST 1050 20kp; 20ps; 20sp AR 2.3-2.4 1,000-1,120 structural steel 4.0-4.5 1,000-1,430 Normalized 2.5-2.7 1,000-1,160 25; 30; 35; 40; 45 4.6-8.0 1,000-1,510 rolled weldable 2.8-2.9 1,000-1,200 fine grain DSTU EN 10025-3 DSTU EN 10025-3 S355N N Shipbuilding РС А 3.0-3.4 1,000-1,250 GOST 5521 GOST 5521 4.0-8.0 1,000-1,500 AR structural steel rolled steel РС В 3.5-3.7 1,000-1,310 25; 30; 35; 40; 45 1,000-1,430 3.8-3.9 1,000-1,400 Structural rolled 08ps; 08sp; 10kp; 4.0-8.0 1,000-1,500 high quality DSTU 7808/GOST DSTU 7809/GOST 1050 10ps; 10sp; 15kp; 4.0-6.0 AR 1,000-1,500 steel for cold 4041 15ps; 15sp; 20kp; stamping 20ps; 20sp; DSTU 7808/GOST 4041 08Yu 4.0-8.0 1,000-1,510 AR, N METINVESTHOLDING.COM

08 09 ILYICH STEEL ILYICH STEEL

CIS standards European standards

Standard Standard Standard for steel Thickness, Width, Delivery Standard for steel Thickness, Width, Delivery Applications for technical Steel grade Applications for technical Steel grade Hot rolled steel rolled Hot grade mm mm condition grade mm mm condition specifications specifications 2.0-2.2 1,000-1,060 2.0-2.2 1,000-1,060 2.3-2.4 1,000-1,120 2.3-2.4 1,000-1,120 Structural steel 2.5-2.7 1,000-1,160 2.5-2.7 1,000-1,160 with improved 2.8-2.9 1,000-1,200 30MnB5 atmospheric DSTU EN 10025-5 DSTU EN 10025-5 S355J0W 2.8-2.9 1,000-1,200 AR, N 3.0-3.4 1,000-1,250 corrosion Alloy rolled 3.0-3.4 1,000-1,250 3.5-3.7 1,000-1,310 steels for resistance EN 10083-3 EN 10083-3 3.8-3.9 1,000-1,400 AR 3.5-3.7 1,000-1,310 quenching and 4.0-8.0 1,000-1,500 3.8-3.9 1,000-1,400 tempering 2.5-2.9 1,000-1,050 2.0-2.2 1,000-1,060 3.0-3.5 1,000-1,200 2.3-2.4 1,000-1,120 38MnB5 3.6-3.9 1,000-1,300 4.0-5.9 1,000-1,400 2.5-2.7 1,000-1,160 6.0-8.0 1,000-1,500 2.8-2.9 1,000-1,200 S355M 2.0-2.4 1,000 3.0-3.4 1,000-1,250 Non-alloy 2.5-2.8 1,000-1,060 rolled steel for EN 10083-2 EN 10083-2 C45 2.9-3.2 1,000-1,200 AR 3.5-3.7 1,000-1,310 quenching and Thermome- 3.3-3.9 1,000-1,250 3.8-3.9 1,000-1,400 tempering chanical rolled 4.0-8.0 1,000-1,500 weldable fine DSTU EN 10025-4 DSTU EN 10025-4 4.0-8.0 1,000-1,500 M 1.8-1.9 1,000-1,150 grain structural 2.5-2.7 1,000-1,060 2.0-2.2 1,000-1,330 steel 2.8-2.9 1,000-1,150 2.3-2.4 1,000-1,380 Low carbon 2.5-2.7 1,000-1,430 3.0-3.7 1,000-1,250 DD11; DD12; DD13; rolled steel for EN 10111 EN 10111 2.8-2.9 1,000-1,450 AR, N DD14 S420M; S460M 3.8-3.9 1,000-1,300 cold forming 3.0-3.4 1,000-1,480 4.0-4.9 1,000-1,400 3.5-3.7 1,000-1,500 5.0-5.9 1,000-1,450 3.8-3.9 1,000-1,530 4.0-8.0 1,000-1,500 6.0-8.0 1,000-1,500 1.8 1,000-1,150 1.9 1,000-1,250 Dimensions and technical requirements should be agreed during the conclusion of contracts. 2.0 1,000-1,290 AR – as rolled, N – after normalizing rolling, M - thermomecanically rolled. 2.1-2.7 1,000-1,310 S185JR 2.8-2.9 1,000-1,400 3.0-3.4 1,000-1,450 3.5-3.7 1,000-1,480 3.8-3.9 1,000-1,500 4.0-8.0 1,000-1,510 1.35-1.6 1,000 1.7-1.8 1,000-1,150 1.9-1.9 1,000-1,200 2.0-2.4 1,000-1,250 S235JR; S235J0; 2.5-2.7 1,000-1,310 S235J2 2.8-2.9 1,000-1,330 Non-alloy 3.0-3.4 1,000-1,380 EN 10025-2 EN 10025-2 AR, N structural steels 3.5-3.7 1,000-1,430 3.8-3.9 1,000-1,480 4.0-8.0 1,000-1,510 2.0-2.2 1,000-1,180 2.3-2.4 1,000-1,230 2.5-2.7 1,000-1,280 S275JR; S275J0; 2.8-2.9 1,000-1,310 S275J2 3.0-3.4 1,000-1,350 ILYICH STEEL 3.5-3.7 1,000-1,400 Annual capaсity, t 3.8-3.9 1,000-1,450 4.0-8.0 1,000-1,510 2.0-2.2 1,000-1,060 3 800 000 1 370 000 360 000 2.3-2.4 1,000-1,120 S355JR; S355J0; Continuous Continuous Continuous HDG unit 1 2.5-2.7 1,000-1,160 S355J2 Hot rolling wide Cold rolling Continuous HDG unit 2U 2.8-2.9 1,000-1,200 METINVESTHOLDING.COM Strip mill 1700 Mill 1700 3.0-3.4 1,000-1,250 10 Hot rolled coils and sheets/Cold rolled coils and sheets 11 ILYICH STEEL ILYICH STEEL

European standards American standards

Standard Standard Standard for steel Thickness, Width, Delivery Standard for steel Thickness, Width, Delivery Applications for technical Steel grade Applications for technical Steel grade Hot rolled steel rolled Hot grade mm mm condition grade mm mm condition specifications specifications 3.5-3.7 1,000-1,310 1.8 1,000-1,150 Non-alloy S355JR; S355J0; EN 10025-2 EN 10025-2 3.8-3.9 1,000-1,400 AR, N 1.9 1,000-1,250 structural steels S355J2 4.0-8.0 1,000-1,500 2.0 1,000-1,290 2.0-2.2 1,000-1,060 Carbon rolled 2.1-2.7 1,000-1,310 2.3-2.4 1,000-1,120 steel for general ASTM A 568 ASTM A 568 1006; 1008; 1010 2.8-2.9 1,000-1,400 AR applications Normalized 2.5-2.7 1,000-1,160 3.0-3.4 1,000-1,450 weldable fine 2.8-2.9 1,000-1,200 3.5-3.7 1,000-1,480 EN 10025-3 EN 10025-3 S355N N grain structural 3.0-3.4 1,000-1,250 3.8-3.9 1,000-1,500 steel 3.5-3.7 1,000-1,310 4.0-8.0 1,000-1,510 3.8-3.9 1,000-1,400 2.0-2.4 1,000-1,250 4.0-8.0 1,000-1,500 2.5-2.7 1,000-1,310 2.0-2.2 1,000-1,060 2.8-2.9 1,000-1,330 Carbon 2.3-2.4 1,000-1,120 ASTM A36/A36M ASTM A36/A36M ASTM A36/A36M 3.0-3.4 1,000-1,380 AR structural steel 2.5-2.7 1,000-1,160 3.5-3.7 1,000-1,430 2.8-2.9 1,000-1,200 3.8-3.9 1,000-1,480 S355M 3.0-3.4 1,000-1,250 4.0-8.0 1,000-1,510 Thermome- 3.5-3.7 1,000-1,310 1.35-1.6 1,000 chanical rolled 3.8-3.9 1,000-1,400 1.7-1.8 1,000-1,150 weldable fine EN 10025-4 EN 10025-4 4.0-8.0 1,000-1,500 M 1.9-1.9 1,000-1,200 grain structural 2.5-2.7 1,000-1,060 2.0-2.4 1,000-1,250 steel 2.8-2.9 1,000-1,150 Rolled steel for 2.5-2.7 1,000-1,310 API 5L API 5L B AR, N 3.0-3.7 1,000-1,250 piping products 2.8-2.9 1,000-1,330 S420M; S460M 3.8-3.9 1,000-1,300 3.0-3.4 1,000-1,380 4.0-4.9 1,000-1,400 3.5-3.7 1,000-1,430 5.0-5.9 1,000-1,450 3.8-3.9 1,000-1,480 6.0-8.0 1,000-1,500 4.0-8.0 1,000-1,510 2.0-2.2 1,000-1,060 2.0-2.4 1,000-1,250 Structural steel 2.3-2.4 1,000-1,120 2.5-2.7 1,000-1,310 with improved 2.5-2.7 1,000-1,160 Rolled steel 2.8-2.9 1,000-1,330 atmospheric EN 10025-5 EN 10025-5 S355J0W 2.8-2.9 1,000-1,200 AR, N with improved ASTM A1011/A1011M ASTM A1011/A1011M SS Grade 50 3.0-3.4 1,000-1,380 AR corrosion 3.0-3.4 1,000-1,250 formability 3.5-3.7 1,000-1,430 resistance 3.5-3.7 1,000-1,310 3.8-3.9 1,000-1,480 3.8-3.9 1,000-1,400 4.0-8.0 1,000-1,500 2.0-2.2 1,000-1,060 2.3-2.4 1,000-1,120 Dimensions and technical requirements should be agreed during the conclusion of contracts. 2.5-2.7 1,000-1,160 AR – as rolled, N – after normalizing rolling. 2.8-2.9 1,000-1,200 S315MC 3.0-3.4 1,000-1,250 3.5-3.7 1,000-1,310 Thermome- 3.8-3.9 1,000-1,400 chanical rolled EN 10149-2 EN 10149-2 4.0-8.0 1,000-1,500 M steels for cold Japanese standards forming 2.5-2.7 1,000-1,060 2.8-2.9 1,000-1,150 Standard 3.0-3.7 1,000-1,250 Standard for steel Thickness, Width, Delivery S420MC; S460MC; 3.8-3.9 1,000-1,300 Applications for technical Steel grade S500MC grade mm mm condition 4.0-4.9 1,000-1,400 specifications 5.0-5.9 1,000-1,450 2.0-2.2 1,000-1,180 6.0-8.0 1,000-1,500 2.3-2.4 1,000-1,230 2.0-2.4 1,000-1,250 2.5-2.7 1,000-1,280 Rolled steel for 2.8-2.9 1,000-1,310 2.5-2.7 1,000-1,310 JIS G 3116 JIS G 3116 SG 255 AR, N gas cylinders 3.0-3.4 1,000-1,350 Steel for general 2.8-2.9 1,000-1,330 structural DIN 17100 DIN 17100 St 37-2 3.0-3.4 1,000-1,380 AR 3.5-3.7 1,000-1,400 purposes 3.5-3.7 1,000-1,430 3.8-3.9 1,000-1,450 3.8-3.9 1,000-1,480 4.0-8.0 1,000-1,500 4.0-8.0 1,000-1,510 Dimensions and technical requirements should be agreed during the conclusion of contracts. METINVESTHOLDING.COM Dimensions and technical requirements should be agreed during the conclusion of contracts. AR – as rolled, N – after normalizing rolling. 12 AR – as rolled, N – after normalizing rolling, M - thermomecanically rolled. 13 ZAPORIZHSTAL ZAPORIZHSTAL

CIS standards CIS standards

Standard Standard Standard for steel Thickness, Width, Delivery Standard for steel Thickness, Width, Delivery Applications for technical Steel grade Applications for technical Steel grade Hot rolled steel rolled Hot grade mm mm condition grade mm mm condition specifications specifications 1.5 970-1,100 1.8 1,000 S235JR St1kp; St1ps 1.8 970-1,250 1.9 1,000-1,100 1.9 1,000-1,250 2.0-2.5 1,000-1,250 S235JR; S235JRG1; 2.6-3.9 1,000-1,360 St2ps 1.8 1,000 S235JRG2 St0; St1kp; St1ps; 2.0-2.5 1,000-1,250 4.0-8.0 1,000-1,500 St2kp; St2ps; 2.6-2.9 1,000-1,360 2.0-2.4 1,000-1,000 Hot rolled non- St3kp; St3ps 3.0-3.9 1,000-1,500 TU U 27.1-23365425- TU U 27.1-23365425- 2.5-3.5 1,000-1,250 alloy structural S275JR 621:2007 621:2007 2.0-2.4 1,000 steel 3.6-3.9 1,000-1,360 DSTU 2651/GOST 380 St1sp; St2sp 2.5-3.1 1,000-1,250 4.0-8.0 1,000-1,400 3.2-3.9 1,000-1,400 1.8 1,000 St2kp; St2ps; 1.9-2.4 1,000-1,100 1.9 1,000-1,100 S235JR St3kp; Ст3ps 2.5-3.9 1,000-1,250 (fully-killed) 2.0-2.4 1,000-1,000 4.0-4.5 1,000-1,250 Carbon steel DSTU 2834/GOST St3sp 2.5-3.5 1,000-1,250 4.6-8.0 1,000-1,500 for general AR 16523 applications 3.6-3.9 1,000-1,400 St1kp; St1ps; St2kp; St4kp; St4ps; 3.0-3.4 1,000-1,000 DSTU 2651/GOST 380; St2ps; St3kp; St3ps; Rhombic and 4.0-6.0 1,000-1,250 St4sp TU U 27.1-31632138- DSTU 7809/GOST 1050 08kp; 08ps; 10kp; 3.5-3.9 1,000-1,250 lentil corrugated 1333:05 10ps; 20kp; 20ps 1.5 970-1,100 steel TU U 27.1-23365425- S235JR 08kp; 08ps 1.8 970-1,250 4.0-6.0 1,000-1,250 621:2007 S235JRG2 1.9 1,000-1,250 2.0-2.5 950-1,250 10kp; 10ps; 15kp; St1kp; St1ps; St2kp; 1.9 1,000-1,100 2.6-2.9 1,000-1,360 15ps; 20kp; 20ps St2ps; St3kp; St3ps 3.0-3.9 1,000-1,500 DSTU 7809/GOST 1050 08kp; 08ps; 10kp; 2.0-2.5 950-1,250 2.0-2.4 1,000 10ps; 15kp; 15ps; 2.6-2.9 1,000-1,360 St1sp; St2sp; 2.5-3.5 1,000-1,250 20kp; 20ps 3.0-3.9 1,000-1,500 St3sp 2.0-2.4 1,000-1,000 3.6-3.9 1,000-1,400 AR 10; 15; 20 2.5-3.5 1,000-1,250 DSTU 2651/GOST 380 St1kp; St1ps; St2kp; St2ps; St3kp; St3ps; 4.0-8.0 1,000-1,500 3.6-3.9 1,000-1,400 St4kp; St4ps St0 4.0-6.0 1,000-1,500 St1sp; St2sp; St3sp; St2kp; St2ps; 4.0-8.0 1,000-1,400 1,000-1,500 St4sp St3kp; St3ps; 4.0-6.0 GOST 14637 DSTU 2651/GOST 380 St4kp; St4ps; 3.0-3.4 1,000 St2sp; St3sp 1,000-1,400 Rolled carbon steel for general TU U 14-4-426-98 St4sp; St5sp 3.5-3.9 1,000-1,250 St4ps 1,000-1,500 Carbon steel 4.0-8.0 use St5sp 4.0-6.0 1,000-1,250 St4sp 1,000-1,400 AR plates 2.5 1,000-1,250 St0; St2kp; St2ps; 6.1-8.0 1,000-1,500 St3ps usp 2.6-3.9 1,000-1,360 St3kp; St3ps 4.0-6.0 1,000-1,400 TU U 14-16-56-2000 DSTU 2651/GOST 380 St2sp; St3sp 6.1-8.0 1,000-1,400 St4ps usp 3.8 1,080-1,080 St1kp; St1ps 1,000-1,500 4.0-8.0 2.0-2.5 950-1,250 St1sp 1,000-1,400 08kp; 08ps; 10kp; TU U 14-4-426-98 2.6-2.9 1,000-1,360 St0; St1kp; St1ps; 10ps; 15kp; 15ps St2kp; St2ps; 3.0-3.9 1,000-1,500 Expanded steel TU U 27.1-00190319- TU U 27.1-00190319-1301- St3kp; St3ps; 2.0-6.0 500-1,250 steel sheet 08kp; 08ps; 10kp; sheet (PVK, PVH) 1301-2003 2003 08kp; 10kp; 10ps; 10ps; 15kp; 15ps; 4.0-8.0 1.000-1.500 15kp; 15ps 20kp; 20ps 09G2; 09G2D; 10; 15; 20 4.0-8.0 1,000-1,400 4.0-4.9 1,000-1,360 High strength DSTU 8541/GOST 09G2S Rolled high 09G2; 09G2D; 2.0-2.9 1,000 DSTU 8541/GOST 19281 GOST 17066 DSTU 8541/GOST 19281 steel 19281 09G2; 09G2D; strength steel 09G2S 3.0-3.9 1,000-1,250 5.0-8.0 1,000-1,400 09G2S AR 08kp; 08ps; 10kp; High-strength 3.0-3.9 1,000-1,250 10ps; 15kp; 15ps; 850-1,500 low-alloy rolled TU U 27.1-4-516- Rolled products GOST 1577 DSTU 7809/GOST 1050 20kp; 20ps; 25ps 4.0-8.0 TU 14-226-135-93 07GYuT; 08GYuT steel for cold 2002 of high quality 4.0-6.0 1,000-1,300 10; 15; 20 1,000-1,400 stamping structural steel TU U 24.1-23365425- 3.0-3.8 1,000 GOST 1577 65G 687:2013 3.9-6.0 1,000-1,250 Structural rolled 08kp; 08ps; 10kp; high quality DSTU 7808/GOST 10ps; 15kp; 15ps; 4.0-4.5 850-1,500 DSTU 7808/GOST 4041 steel for cold 4041 20kp; 20ps; 25ps stamping 10; 15; 20 4.0-4.5 1,000-1,400 AR METINVESTHOLDING.COM 08kp; 08ps; 10kp; Dimensions and technical requirements should be agreed during the conclusion of contracts. Structural rolled Protocol 14-226- Protocol 14-226-199-2016 10ps; 15kp; 15ps; 4.5-8.0 850-1,500 AR – as rolled. steel 199-2016 14 20kp; 20ps 15 ZAPORIZHSTAL ILYICH STEEL

European standards CIS standards

Standard Standard for steel Thickness, Width, Delivery Standard for technical Thickness, Width, Applications for technical Steel grade Applications Standard for steel grade Steel grade Hot rolled steel rolled Hot grade mm mm condition specifications mm mm specifications steel Cold rolled 0.5-0.6 935-1,090 1.8 1,000 0.61-0.7 935-1,270 1.9 1,000-1,100 St1kp; St1ps; 0.71-0.8 935-1,320 S235JR 2.0-2.5 1,000-1,250 St1sp; St2kp; 0.81-0.9 935-1,370 Non-alloy 2.6-3.9 1,000-1,360 St2ps; St2sp EN 10025-2 EN 10025-2 0.91-1.2 935-1,390 structural steels 4.0-8.0 1,000-1,500 1.21-2.0 935-1,420 2.0-2.4 1,000 0.7 935-1,120 S275JR 2.5-3.5 1,000-1,250 AR 0.8 935-1,170 3.6-3.9 1,000-1,360 DSTU 2651/GOST 380 St3kp; St3ps; 0.9-1.0 935-1,220 1.8 970-1,100 St3sp 1.1-1.2 935-1,270 1.9 1,000-1,250 1.21-1.6 935-1,320 Low carbon 2.0-2.5 950-1,250 rolled steel for EN 10111 EN 10111 DD11 1.61-2.0 935-1,370 cold forming 2.6-2.6 950-1,360 1.0-1.3 935 St4kp; St4ps; 2.7-2.9 1,000-1,360 1.4-1.5 935-1,000 3.0-6.0 1,000-1,500 St4sp; St5ps; St5sp 1.6-1.8 935-1,140 1.9-2.0 935-1,190 Dimensions and technical requirements should be agreed during the conclusion of contracts. 0.38-0.45 935-1,250 AR – as rolled. 0.46-0.6 0.61-0.7 935-1,270 08Yu; 08kp; 08ps; 0.71-0.8 935-1,320 08sp 0.81-0.9 935-1,380 0.91-1.2 Carbon steel 935-1,425 1.21-2.0 for general DSTU 2834/GOST 16523 applications 0.5-0.6 935-1,090 0.61-0.7 935-1,270 0.71-0.8 935-1,320 10kp; 10ps; 10sp 0.81-0.9 935-1,370 DSTU 7809/GOST 1050 0.91-1.2 935-1,390 1.21-2.0 935-1,420 0.7 935-1,120 0.8 935-1,170 15kp; 15ps; 15sp; 0.9-1.0 935-1,220 20kp; 20ps; 20sp 1.1-1.2 935-1,270 1.21-1.6 935-1,320 1.61-2.0 935-1,370 1.0-1.3 935-935 1.4-1.5 935-1,000 25; 30; 35; 40; 45 1.6-1.8 935-1,140 1.9-2.0 935-1,190 0.38-0.45 935-1,250 0.46-0.6 935-1,250 0.61-0.7 935-1,270 08Yu; 08kp; 08ps; GOST 9045 0.71-0.8 935-1,320 08sp 0.81-0.9 935-1,380 0.91-1.2 935-1,425 1.21-2.0 0.38-0.45 935-1,250 0.46-0.6 Low carbon rolled 0.61-0.7 935-1,270 08Yu; 08kp; 08ps; steel for cold GOST 9045 GOST 9045 0.71-0.8 935-1,320 08sp stamping 0.81-0.9 935-1,380 0.91-1.2 935-1,425 1.21-2.0 0.7 935-1,000 0.8 935-1,060 Rolled high 09G2; 09G2S; 0.9-1.0 935-1,100 GOST 17066 GOST 19281 strength steel 10HNDP; 14G2 11.1-1.3 935-1,140 1.4-1.8 935-1,190 1.9-2.0 935-1,250 16 17 ILYICH STEEL ZAPORIZHSTAL

European standards CIS standards

Standard for technical Thickness, Width, Standard for technical Thickness, Width, Applications Standard for steel grade Steel grade Applications Standard for steel grade Steel grade specifications mm mm specifications mm mm Cold rolled steel Cold rolled 0.38-0.45 935-1,250 St1kp; St1ps; 0.8-1.0 1,000-1,250 0.46-0.6 St2kp; St2ps; 1.1-2.0 1,000-1,360 Low carbon rolled 0.61-0.7 935-1,270 St3kp; St3ps DSTU 2651/GOST 380 2,0-3,2 1,000-1,450 steel for cold EN 10130 EN 10130 DC01 0.71-0.8 935-1,320 0.8-0.9 1,000-1,000 forming St1sp; St2sp; 0.81-0.9 935-1,380 1.0-2.0 1,000-1,250 0.91-1.2 St3sp 935-1,425 2.0-3.2 1,000-1,350 1.21-2.0 0.5 1,000-1,050 0.38-0.45 935-1,250 Carbon steel 08kp; 08ps; 10kp; 0.6 1,000-1,230 0.46-0.6 for general DSTU 2834/GOST 16523 10ps; 15kp; 15ps; 0.65-0.7 1,000-1,250 Rolled steel 0.61-0.7 935-1,270 applications 20kp; 20ps 0.8-0.9 1,000-1,360 for vitreous EN 10209 EN 10209 DC01EK 0.71-0.8 935-1,320 1.0-2.0 1,000-1,500 enameling 0.81-0.9 935-1,380 GOST 9045 0.8-1.9 1,000-1,250 0.91-1.2 10; 15 935-1,425 2.0 1,000-1,400 1.21-2.0 0.8-0.9 1,000-1,000 20 0.7 935-1,120 1.0-1.9 1,000-1,250 0.8 935-1,170 1,000-1,360 Rolled steel with 0.9-1.0 935-1,220 20 2.0 high yield strength EN 10268 EN 10268 HC260LA 1,000-1,400 for cold forming 1.1-1.2 935-1,270 0.5 1,000-1,050 1.21-1.6 935-1,320 0.6 1,000-1,220 08kp; 08ps; 08Yu; 1.61-2.0 935-1,370 0.65-0.7 1,000-1,250 10kp; 10ps 0.8-0.9 1,000-1,360 Dimensions and technical requirements should be agreed during the conclusion of contracts. 1.0-2.0 1,000-1,500 0.5 1,000-1,050 0.6 1,000-1,220 15kp; 15ps 0.65-0.7 1,000-1,250 Cold rolled full 0.8-2.0 1,000-1,360 Protocol 14-226-186:2014 Protocol 14-226-186:2014 hard steel 0.5 1,000-1,050 American standards 0.6 1,000-1,220 20kp; 20ps 0.65-1.0 1,000-1,250 1.1-2.0 1,000-1,360 Standard for technical Thickness, Width, Applications Standard for steel grade Steel grade 0.8-1.9 1,000-1,250 specifications mm mm 10; 15 2.0 1,000-1,400 0.38-0.45 0.8-0.9 1,000-1,000 935-1,250 0.46-0.6 20 1.0-1.9 1,000-1,250 0.61-0.7 935-1,270 2.0 1,000-1,360 CS Type B 0.71-0.8 935-1,320 Cold rolled 0.5-0.6 1,000-1,000 0.81-0.9 935-1,380 steel for steel TU U 14-4-479-2000 TU U 14-4-479-2000 08ps 0.7-0.7 1,000-1,250 Rolled steel 0.91-1.2 935-1,425 enamelware 0.8-1.2 1,000-1,400 with improved ASTM A1008/А1008М ASTM A1008/А1008М 1.21-2.0 935-1,425 08kp; 08ps; 08Yu; formability 0.7-0.7 935-1,120 Cold rolled 10; 10kp; 10ps; 15; TU 14-15-309-93 TU 14-15-309-93 2.0-3.2 1,000-1,450 0.8-0.8 935-1,170 structural steel 15kp; 15ps; 20; 20kp; 20ps SS Grade 40 0.9-1.0 935-1,220 High strength low- Type 2 1.1-1.2 935-1,270 07GSYuT alloy rolled steel TU U 27.1-4-516-2002 TU U 27.1-4-516-2002 2.1-3.2 1,000-1,250 1.21-1.6 935-1,320 for cold stamping 08GSYuT 1.61-2.0 935-1,370 0.5 1,000-1,050 Low carbon rolled 0.6 1,000-1,230 Dimensions and technical requirements should be agreed during the conclusion of contracts. steel for cold Protocol 14-226-191:2015 Protocol 14-226-191:2015 DC01 0.65-0.7 1,000-1,250 forming 0.8-0.9 1,000-1,360 1.0-2.0 1,000-1,500 0.5 1,000-1,050 Low carbon rolled 0.6 1,000-1,230 steel for cold GOST 9045 GOST 9045 08kp; 08ps; 08Yu 0.65-0.7 1,000-1,250 stamping 0.8-0.9 1,000-1,360 1.0-2.0 1,000-1,500 Rolled high 09G2; 09G2D;

GOST 17066 DSTU 8541/GOST 19281 2.5-2.8 1,000-1,250 METINVESTHOLDING.COM strength steel 09G2S Tin plate TU U 14-4-413-97 TU U 14-4-413-97 ОН 0.20-0.40 120-520 18 19 Dimensions and technical requirements should be agreed during the conclusion of contracts. ZAPORIZHSTAL ILYICH STEEL

European standards CIS standards

Standard Zinc Standard for technical Thickness, Width, Standard for steel Thickness, Width, Applications Standard for steel grade Steel grade Applications for technical Steel grade coating specifications mm mm grade mm mm Cold rolled steel Cold rolled specifications class 0.5 1,000-1,050 0.4-0.5 950-1,250 DX51D; DX52D 0.6 1,000-1,230 0.55-1.75 1,000-1,250 Low carbon rolled steel for cold EN 10130 EN 10130 DC01 0.65-0.7 1,000-1,250 S220GD; S250GD; 0.4-0.5 950-1,250

DSTU EN 10346 DSTU EN 10346 Z140; Z275 steel rolled Galvanized forming S280GD 0.55-1.75 0.8-0.9 1,000-1,360 S320GD 0.7-1.6 1,000-1,250 1.0-2.0 1,000-1,500 S350GD 0.9-1.6 St1kp; St1ps; Hot dip St1sp; St2kp; 0.4-0.5 950-1,250 Dimensions and technical requirements should be agreed during the conclusion of contracts. Class 1; galvanized steel DSTU 2651 / GOST 380 St2ps; St2sp; Class 2 GOST 14918 St3kp; St3ps; 0.55-1.75 1,000-1,250 St3sp DSTU 7809/ GOST 1050; 08kp; 08ps; 08yu; 0.4-0.5 950-1,250 Class 1; GOST 9045 10kp 0.55-1.75 1,000-1,250 Class 2 0.4-0.5 950-1,250 02; 03 GOST R 52246 GOST R 52246 0.55-1.75 Z140; Z275 1,000-1,250 350 0.9-1.6

Dimensions and technical requirements should be agreed during the conclusion of contracts.

European standards

Standard Zinc Standard for steel Thickness, Width, Applications for technical Steel grade coating grade mm mm specifications class 0.4-0.5 950-1,250 DX51D; DX52D 0.55-1.75 1,000-1,250 Hot dip S220GD; S250GD; 0.4-0.5 950-1,250 EN 10346 EN 10346 Z140; Z275 galvanized steel S280GD 0.55-1.75 1,000-1,250 0.7-1.6 S320GD; S350GD 1,000-1,250 0.9-1.6

Dimensions and technical requirements should be agreed during the conclusion of contracts.

American standards

Standard Zinc Standard for steel Thickness, Width, Applications for technical Steel grade coating grade mm mm specifications class CS Type B; SS 0.4-0.5 950-1,250 ZAPORIZHSTAL Grade 30 0.55-1.75 Hot dip Annual capacity, t ASTM A653/A653M ASTM A653/A653M SS Grade 50 G40; G90 galvanized steel Class 1 1,000-1,250 0.9-1.6 SS Grade 50 3 860 000 1 310 000 360 000 Class 2 Continuous Cold rolling mill 1680 (C) Tin plate cold rolling Dimensions and technical requirements should be agreed during the conclusion of contracts. Hot rolling And 1680 (R), 1200, Mills 450, 650 Mill 1680 2800 20 Hot rolled coils and sheets/Cold rolled coils, sheets and strip 21 UNISTEEL CONTACTS CIS standards WESTERN EUROPE HEAD OFFICE BELGIUM REPRESENTATIVE GERMANY REPRESENTATIVE Applications Standard Steel grade Thickness, mm Width, mm Zinc coating Via XII Ottobre 3 OFFICE OFFICE 16121 Genova, Trametal Europe S.p.r.l Trametal Deutschland GmbH Tel: +39 010 576 29 11 105 Rue Colonel Bourg Carl-von-Linde Str. 40 DX51D; DX52D 0.4 - 2.0 Fax: +39 010 576 29 90 1030 Brussels, Belgium 85716 Unterschleißheim, Germany Continuously hot-dip coated e-mail: [email protected] S220GD; S250GD 0.4 - 2.0 Z100, Z140, Z200, Tel: +32 2 726 53 71 Tel: +49 0 89 309 079 0 flat steel products for cold DSTU EN 10346 1,000-1,250 Fax: +32 2 726 47 79 Fax: +49 0 89 309 079 79 S280GD 0.5 - 2.0 Z225, Z275 ITALY REPRESENTATIVE OFFICE

Galvanized rolled steel rolled Galvanized forming Via Antonio Salieri 36 Trametal Deutschland GmbH S320GD; S350GD 0.7 - 2.0 37050 Vallese di Oppeano (VR), Italy IBERIAN PENINSULA Vertriebsbüro Nord Almastr. 10 Tel: +39 045 713 33 11 REPRESENTATIVE OFFICE 45130 Essen, Germany Fax: +39 045 713 33 94 Metinvest Iberica S.L. Tel: +49 0 201 177 89 70 Dimensions, steel grade and technical requirements should be agreed during the conclusion of contracts. Calle Rodriguez Arias 6, 2° pl. el. 202-D Fax: +49 0 201 177 89 797 Production of HDG coils with other coating mass is available. UK REPRESENTATIVE OFFICE 48008 Bilbao, Spain Requirements for forming and weldability of finished products should be taken into consideration when ordering Ropery Road, Teams, Gateshead Tel: +34 94 640 00 41 the weight of zinc coating. Tyne and Wear, NE8 2RD, UK Surface quality: A, B. Tel: +44 0 191 460 42 45 Surface treatment: chemical passivation (C), trivalent chrome-based. Fax: +44 0 191 460 05 67

METINVEST INTERNATIONAL SA SOUTH-EAST EUROPE HEAD OFFICE HEAD OFFICE 2 Rue Vallin, Geneva 1201, Dobrudzha Str., 1 European standards Tel. +41 22 906 18 28 1000 Sofia, Bulgaria Fax: +41 22 906 18 29 Tel: +359 2 981 29 10 e-mail: [email protected] e-mail: [email protected]

Applications Standard Steel grade Thickness, mm Width, mm Zinc coating POLAND REPRESENTATIVE OFFICE ROMANIA REPRESENTATIVE OFFICE 33 Ul. Warszawska, Katowice Metinvest Carpathia SRL 40-010 Poland 11A Turtureleloa Street, DX51D; DX52D 0.4 - 2.0 Tel: +48 032 888 58 41 Phoenicia Business Center, 2nd Floor Continuously hot-dip coated e-mail: [email protected] 3rd District Bucharest, Romania S220GD; S250GD 0.4 - 2.0 Z100, Z140, Z200, Tel: + 40 314 378 372 flat steel products for cold EN 10346 1,000-1,250 Z225, Z275 e-mail: [email protected] forming S280GD 0.5 - 2.0 S320GD; S350GD 0.7 - 2.0 UKRAINE ASIA Dimensions, steel grade and technical requirements should be agreed during the conclusion of contracts. METINVEST-SMC HEAD OFFICE REPRESENTATIVE OFFICE Production of HDG coils with other coating mass is available. 15A Leiptsyzka Street, Kyiv No.602, Building 5, Wanda Plaza,93# Jianguo Road Requirements for forming and weldability of finished products should be taken into consideration when ordering 01015, Ukraine Chaoyang District, Beijing, China the weight of zinc coating. Tel: +380 80 030 30 70 Tel: +86 10 58208124 Surface quality: A, B. Tel: +380 44 581 44 37 e-mail: [email protected] Fax: +380 44 581 44 88 Surface treatment: chemical passivation (C), trivalent chrome-based. e-mail: [email protected]

MENA TURKEY REPRESENTATIVE OFFICE METINVEST INTERNATIONAL SA Atasehir Residence, Sedef Caddesi, No 2 A Blok Daire: 4 GULF BRANCH 34758 Atasehir – Istanbul, Turkey Jebel Ali Free Zone, Building LOB17, Floor 3 Tel: +90 216 456 56 80 PO Box 263027, Dubai, Fax: +90 216 456 56 81 Tel: +971 4 881 19 40 e-mail: [email protected] Fax: +971 4 881 19 57 e-mail: [email protected] REPRESENTATIVE OFFICE New Jdeideh, Sagesse Street, 10th Floor NORTH AFRICA REPRESENTATIVE OFFICE Montelibano Building, Beirut, Lebanon : Immeuble de Carthage, Rue du Lac de Constance Tel: +961 90 08 72 Les Berges du Lac, 1053, Tunis Fax: +961 89 30 83 Tel: +216 26 156 900 e-mail: [email protected] Egypt: 5th Settlement, 90th Street, New Cairo Tel: +201 10 0070700 e-mail: [email protected] AMERICA UNISTEEL NORTH AMERICA & CANADA REPRESENTATIVE LATIN AMERICA REPRESENTATIVE OFFICE Annual capacity, t OFFICE 100 Enriquillo Avenue, Residencial Alkhou IV Apt 403, Santo Domingo, Dominican Republic 1100 Burloak Drive, Suite 300 Tel: +1 809 482 74 56 Burlington, ON, L7L 6B2 Fax: +1 809 482 76 34 Canada 100 000 e-mail: [email protected] Tel: +1 905 332 2759 Fax: +1 905 332 3007 e-mail: [email protected] 22 Continuously hot-dip coated steel products 23 metinvestholding.com 24