DOCSLIB.ORG

Characterization of the Hydrophobicity of Polymeric Reverse Osmosis and Nanofiltration Membranes: Implications to Membrane Fouling

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Characterization of the Hydrophobicity of Polymeric Reverse Osmosis and Nanofiltration Membranes: Implications to Membrane Fouling Desalination and Water Purification Research and Development Program Report No. 57 Characterization of the Hydrophobicity of Polymeric Reverse Osmosis and Nanofiltration Membranes: Implications to Membrane Fouling U.S. Department of the Interior Bureau of Reclamation Technical Service Center Denver, Colorado May 2000 Form Approved REPORT DOCUMENTATION PAGE OMB No. 0704-0188 The public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 2. REPORT TYPE 3. DATES COVERED (From - To) May 2000 Final September 2011 to January 2013 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER Characterization of the Hydrophobicity of Polymeric Reverse Osmosis and Agreement No 98-FC-81-0057 Nanofiltration Membranes: Implications to Membrane Fouling 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER Amy Childress, Johnathan Brandt 5e. TASK NUMBER Task A 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION REPORT University of Nevada, Reno NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR'S ACRONYM(S) Bureau of Reclamation Reclamation U.S. Department of the Interior 11. SPONSOR/MONITOR'S REPORT Denver Federal Center NUMBER(S) PO Box 25007, Denver, CO 80225-0007 DWPR Report No. 57 12. DISTRIBUTION/AVAILABILITY STATEMENT Available from the National Technical Information Service, Operations Division, 5285 Port Royal Road, Springfield VA 22161 13. SUPPLEMENTARY NOTES Report can be downloaded from Reclamation Web site: http://www.usbr.gov/pmts/water/publications/reports.html 14. ABSTRACT As fresh water supplies dwindle and awareness of contaminants rises, the need for effective water treatment technologies increases. For this reason, membrane processes for drinking water treatment are receiving increased attention. This study develops a methodology for determining membrane hydrophobicity and investigates the relationship between hydrophobicity and membrane fouling. It establishes a protocol for measuring contact angles on both cellulose acetate and thin-film composite reverse-osmosis and nanofiltration membranes. It then uses these contact angle measurements in the Lifshitz-van der Waals/Acid-Base approach to quantitatively calculate the surface energetics of the membranes. 15. SUBJECT TERMS Reverse osmosis, nanofiltration, membrane fouling, hydrophobicity, water treatment, desalination 16. SECURITY CLASSIFICATION OF: 17. LIMITATION 18. NUMBER 19a. NAME OF RESPONSIBLE PERSON OF ABSTRACT OF PAGES Scott Irvine a. REPORT b. ABSTRACT a. THIS PAGE 49 19b. TELEPHONE NUMBER (Include area code) U U U 303-445-2253 Standard Form 298 (Rev. 8/98) Prescribed by ANSI Std. Z39.18 Desalination and Water Purification Research and Development Program Report No. 57 Characterization of the Hydrophobicity of Polymeric Reverse Osmosis and Nanofiltration Membranes: Implications to Membrane Fouling Prepared for the Bureau of Reclamation Under Agreement No. 98-FC-81-0057 by Amy Childress, Ph.D., and Jonathan A. Brant University of Nevada, Reno U.S. Department of the Interior Bureau of Reclamation Technical Service Center Denver, Colorado May 2000 MISSION STATEMENTS The U.S. Department of the Interior protects America’s natural resources and heritage, honors our cultures and tribal communities, and supplies the energy to power our future. The mission of the Bureau of Reclamation is to manage, develop, and protect water and related resources in an environmentally and economically sound manner in the interest of the American public. Disclaimer The views, analysis, recommendations, and conclusions in this report are those of the authors and do not represent official or unofficial policies or opinions of the United States Government, and the United States takes no position with regard to any findings, conclusions, or recommendations made. As such, mention of trade names or commercial products does not constitute their endorsement by the United States Government. Acknowledgments This research was funded by the U.S. Department of the Interior, Bureau of Reclamation, Desalination and Water Purification Research and Development Program. The assistance of Kim Linton throughout the study is greatly appreciated. RO and NF Membrane Hydrophobicity CONTENTS Page 1 Introduction ....................................................................................................... 1 2 Background and Related Research ................................................................... 3 2.1 Definition of Contact Angle ...................................................................... 3 2.2 Methods of Measuring Contact Angles ..................................................... 3 2.2.1 Sessile Drop ................................................................................... 3 2.2.2 Immersion Method ........................................................................ 4 2.2.3 Captive Bubble Method ................................................................. 5 2.3 Types of Contact Angles ........................................................................... 6 2.4 Theory of Contact Angle and Hydrophobicity .......................................... 6 2.4.1 Free Energy of Interaction ............................................................. 6 2.4.2 Young’s Equation .......................................................................... 7 2.4.3 Fowkes’ Approach ........................................................................ 8 2.4.4 Lifshitz–van der Waals/Acid-Base Approach ............................... 9 2.4.5 Deviations from Young’s Equation ............................................. 12 2.4.6 Defining Hydrophobic Interactions ............................................. 13 2.5 Hydrophobicity and Membrane Performance ......................................... 14 2.6 Previous Studies on the Determination of Membrane Surface Energetics .......................................................................................... 15 2.7 Previous Studies Correlating Contact Angle and Membrane Surface Energetics with Membrane Performance .......................................... 16 3 Experimental ................................................................................................... 18 3.1 RO and NF Membranes ........................................................................... 18 3.1.1 Thin Film Composite Membranes ............................................... 18 3.1.2 Cellulose Acetate Membranes ..................................................... 18 3.2 Hydrophobicity Measurements ............................................................... 19 3.2.1 Automated Goniometer ............................................................... 19 3.2.2 Syringe and U-Shaped Needle .................................................... 21 3.2.3 Probe Liquids .............................................................................. 21 3.2.4 Bubble Volume ............................................................................ 22 3.2.5 Parafilm® Standard ..................................................................... 22 3.2.6 Contact Angle Measurement Procedure ...................................... 23 3.2.7 Preliminary Contact Angle Measurements for Ultrapure Water ........................................................................................... 24 3.2.8 Preliminary Contact Angle Measurements for Glycerol ............. 25 3.2.9 Preliminary Contact Angle Measurements for Diiodomethane ............................................................................ 26 3.3 Membrane Performance Tests ................................................................. 26 3.3.1 Membrane Test Unit .................................................................... 26 v Contents 3.3.2 Solution Chemistries ................................................................... 27 3.3.3 Performance Test Protocol .......................................................... 28 3.3.4 Performance Analysis .................................................................. 28 4 Results and Discussion ................................................................................... 30 4.1 Hydrophobicity of Clean Membrane Coupons ....................................... 30 4.1.1 Sample Calculation ...................................................................... 31 4.2 Membrane Performance Trials ................................................................ 33 4.3 Surface Energetics of Membranes Following Surfactant and Humic Performance Experiments ................................................................. 34 4.4 Hydrophobicity Versus Contact Angle with Water ...............................
Load more

Recommended publications
  • Substrate Wettability Guided Oriented Self Assembly of Janus Particles
    www.nature.com/scientificreports OPEN Substrate wettability guided oriented self assembly of Janus particles Meneka Banik1, Shaili Sett2, Chirodeep Bakli3, Arup Kumar Raychaudhuri2, Suman Chakraborty4* & Rabibrata Mukherjee1* Self-assembly of Janus particles with spatial inhomogeneous properties is of fundamental importance in diverse areas of sciences and has been extensively observed as a favorably functionalized fuidic interface or in a dilute solution. Interestingly, the unique and non-trivial role of surface wettability on oriented self-assembly of Janus particles has remained largely unexplored. Here, the exclusive role of substrate wettability in directing the orientation of amphiphilic metal-polymer Bifacial spherical Janus particles, obtained by topo-selective metal deposition on colloidal Polymestyere (PS) particles, is explored by drop casting a dilute dispersion of the Janus colloids. While all particles orient with their polymeric (hydrophobic) and metallic (hydrophilic) sides facing upwards on hydrophilic and hydrophobic substrates respectively, they exhibit random orientation on a neutral substrate. The substrate wettability guided orientation of the Janus particles is captured using molecular dynamic simulation, which highlights that the arrangement of water molecules and their local densities near the substrate guide the specifc orientation. Finally, it is shown that by spin coating it becomes possible to create a hexagonal close-packed array of the Janus colloids with specifc orientation on diferential wettability substrates.
    [Show full text]
  • Reverse Osmosis and Nanofiltration, Second Edition
    Reverse Osmosis and Nanofiltration AWWA MANUAL M46 Second Edition Science and Technology AWWA unites the entire water community by developing and distributing authoritative scientific and technological knowledge. Through its members, AWWA develops industry standards for products and processes that advance public health and safety. AWWA also provides quality improvement programs for water and wastewater utilities. Copyright © 2007 American Water Works Association. All Rights Reserved. Contents List of Figures, v List of Tables, ix Preface, xi Acknowledgments, xiii Chapter 1 Introduction . 1 Overview, 1 RO and NF Membrane Applications, 7 Membrane Materials and Configurations, 12 References, 18 Chapter 2 Process Design . 21 Source Water Supply, 21 Pretreatment, 26 Membrane Process Theory, 45 Rating RO and NF Elements, 51 Posttreatment, 59 References, 60 Chapter 3 Facility Design and Construction . 63 Raw Water Intake Facilities, 63 Discharge, 77 Suspended Solids and Silt Removal Facilities, 80 RO and NF Systems, 92 Hydraulic Turbochargers, 95 Posttreatment Systems, 101 Ancillary Equipment and Facilities, 107 Instrumentation and Control Systems, 110 Waste Stream Management Facilities, 116 Other Concentrate Management Alternatives, 135 Disposal Alternatives for Waste Pretreatment Filter Backwash Water, 138 General Treatment Plant Design Fundamentals, 139 Plant Site Location and Layout, 139 General Plant Layout Considerations, 139 Membrane System Layout Considerations, 140 Facility Construction and Equipment Installation, 144 General Guidelines for Equipment Installation, 144 Treatment Costs, 151 References, 162 iii Copyright © 2007 American Water Works Association. All Rights Reserved. Chapter 4 Operations and Maintenance . 165 Introduction, 165 Process Monitoring, 168 Biological Monitoring, 182 Chemical Cleaning, 183 Mechanical Integrity, 186 Instrumentation Calibration, 188 Safety, 190 Appendix A SI Equivalent Units Conversion Tables .
    [Show full text]
  • Dynamic Modeling of Multi Stage Flash (MSF) Desalination Plant
    Dynamic Modeling of Multi Stage Flash (MSF) Desalination Plant by Hala Faisal Al-Fulaij Department of Chemical Engineering University College London Supervisors: Professor David Bogle Thesis submitted for the degree of Doctor of Philosophy (Ph.D.) at University College London (UCL) July 2011 I, Hala Faisal Al-Fulaij, confirm that the work presented in this thesis is my own. Where information has been derived from other sources, I confirm that this has been indicated in the thesis. Hala F. Al-Fulaij Acknowledgments i Acknowledgments This Ph.D. was carried out between March 2007 and January 2011 at the Chemical Engineering department, University College London (UCL). This work was supervised by Professor David Bogle (UCL) and Professor Hisham Ettouney (Kuwait University). I take this opportunity to thank both of my supervisors for general guidance throughout the project and their great help, support and insight. I also thank Professor Giorgio Micale and Doctor Andrea Cipollina from University of Palermo who expended their time and made significant contribution to my knowledge especially in the computer tools field. Also, I am grateful for the love and support of my family, especially my mother, father, husband and sisters. Their patience and encouragement have given me the strength to complete my thesis study. Finally I would like to dedicate this thesis to my lovely children (Rayan, Maryam, AbdulWahab and Najat) hoping them the most of health, success, and happiness. Abstract ii Abstract The world population is increasing at a very rapid rate while the natural water resources remain constant. During the past decades industrial desalination (reverse osmosis (RO) and multistage flash desalination (MSF)) became a viable, economical, and sustainable source of fresh water throughout the world.
    [Show full text]
  • Inverse Gas Chromatographic Examination of Polymer Composites
    Open Chem., 2015; 13: 893–900 Invited Paper Open Access Adam Voelkel*, Beata Strzemiecka, Kasylda Milczewska, Zuzanna Okulus Inverse Gas Chromatographic Examination of Polymer Composites DOI: 10.1515/chem-2015-0104 received December 30, 2014; accepted April 1, 2015. of composite components and/or interactions between them, and behavior during technological processes. This paper reviews is the examination of Abstract: Inverse gas chromatographic characterization various polymer-containing systems by inverse gas of resins and resin based abrasive materials, polymer- chromatography. polymer and polymer-filler systems, as well as dental restoratives is reviewed. Keywords: surface activity, polymer-polymer interactions, 2 Discussion adhesion, dental restoratives, inverse gas chromatography 2.1 Surface energy and adhesion 1 Introduction IGC is useful for surface energy determination of solid polymers and fillers. Solid surface energy of consists of Inverse gas chromatography (IGC) was introduced in 1967 dispersive ( , from van der Waals forces) and specific by Kiselev [1], developed by Smidsrød and Guillet [2], and ( , from acid-base interactions) components: is still being improved. Its popularity is due to its simplicity D and user friendliness. Only a standard gas chromatograph = + (1) is necessary [3] although more sophisticated equipment has been advised. “Inverse” relates to the aim of the experiment. for solids can be calculated according to several It is not separation as in classical GC, but examination of methods [7]; one of the most often used is that of Schultz- the stationary phase properties. Test compounds with Lavielle [8-12]: known properties are injected onto the column containing dd the material to be examined. Retention times and peak RT××ln VN =× 2 N ×× aggsl × + C (2) profiles determine parameters describing the column filling.
    [Show full text]
  • Characterization and Performance of Nanofiltration Membranes
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by Covenant University Repository Environ Chem Lett (2014) 12:241–255 DOI 10.1007/s10311-014-0457-3 REVIEW Characterization and performance of nanofiltration membranes Oluranti Agboola • Jannie Maree • Richard Mbaya Received: 16 October 2013 / Accepted: 17 January 2014 / Published online: 1 February 2014 Ó Springer International Publishing Switzerland 2014 Abstract The availability of clean water has become a nanofiltration membranes. We also present a new concept critical problems facing the society due to pollution by for membrane characterization by quantitative analysis of human activities. Most regions in the world have high phase images to elucidate the macro-molecular packing at demands for clean water. Supplies for freshwater are under the membrane surface. pressure. Water reuse is a potential solution for clean water scarcity. A pressure-driven membrane process such as Keywords Nanofiltration membranes Á Membrane nanofiltration has become the main component of advanced characterizations Á Pore size Á Surface morphology Á water reuse and desalination systems. High rejection and Performance evaluation Á ImageJ software water permeability of solutes are the major characteristics that make nanofiltration membranes economically feasible for water purification. Recent advances include the pre- Introduction diction of membrane performances under different oper- ating conditions. Here, we review the characterization of Nanofiltration process is one of the most important recent nanofiltration membranes by methods such as scanning developments in the process industries. It shows performance electron microscopy, thermal gravimetric analysis, attenu- characteristics, which fall in between that of ultrafiltration ated total reflection Fourier transform infrared spectros- and reverse osmosis membranes (Mohammed and Takriff copy, and atomic force microscopy.
    [Show full text]
  • Nanofiltration (NF) Is a Pressure Driven Membrane Process
    Nanofiltration Nanofiltration (NF) is a pressure driven membrane process. Hydraulic pressure is used to overcome the feed solution’s osmotic pressure and to induce diffusion of pure water (referred to as permeate) through a semi-permeable NF membrane. The residual feed stream (referred to as retentate, concentrate, or reject) is concentrated by the process, and depending on water quality, may be suitable for further water recovery in additional downstream unit processes; otherwise, the residual stream requires disposal. NF is designed to achieve high removal of divalent and multivalent ions (e.g., calcium, magnesium, sulfate, iron, arsenic, etc.), and is occasionally referred to as membrane softening. NF may achieve moderate to low removal of monovalent ions (e.g., sodium, potassium, chloride). NF is commonly employed to remove hardness from brackish groundwater to produce potable water. Water characterized by high concentrations of calcium or magnesium and monovalent salts may be treated with NF prior to a reverse osmosis. An illustration of the process is shown below. FEED NF PERMEATE CONCENTRATE Summary of technical assessment of NF Criteria Description/Rationale Status of technology Mature and robust technology for water softening and metals removal in various sectors of the industrial and municipal water treatment sectors. Has been employed for produced water treatment. Feed water quality bins Feed water total dissolved solids concentration applicability depends on feed solution composition and may range from 500 to 12,000 mg/L. Most useful for treatment of water with high concentrations of divalent ions (e.g., magnesium, calcium, barium, sulfate), multivalent metals ions (e.g., iron, manganese), and radionuclides.
    [Show full text]
  • Nanoparticles Improving the Wetting Ability of Biological Liquids
    dynam mo ic Torrisi and Scolaro, J Thermodyn Catal 2017, 8:1 er s h & T f C DOI: 10.4172/2157-7544.1000184 o a t l a a l Journal of y n r s i u s o J ISSN: 2157-7544 Thermodynamics & Catalysis Research Article Open Access Nanoparticles Improving the Wetting Ability of Biological Liquids Torrisi L* and Scolaro C Dottorato di Ricerca in Fisica and Dipartimento di Scienze Fisiche MIFT, Università di Messina, V.le F.S. D’Alcontres 31, 98166 S. Agata (ME), Italy Abstract The contact angle of some biological liquids was investigated on different biocompatible surfaces and nanoparticles were employed to improve their wetting ability. Biocompatible nanoparticles based on titanium, silver and gold were prepared using the technique of the pulsed laser ablation in liquids. The nanoparticles were characterized in size, shape, coalescence and concentration in solutions. Solid biocompatible substrates based on polyethylene, hydroxyapatite and titanium were employed as simulation of prosthetic surfaces. Measurements of contact angle were performed in different biological solution, including the human blood, with respect to the distilled water, without and with the use of the metallic nanoparticles at concentration of the order of 80-370 µg/ml. Keywords: Nanoparticles; Laser ablation; Contact angle; viscosity, thermal and electric conduction, vapour pressure, the PH Biocompatibility; Interfaces and other parameters [5,9]. The wetting ability of the liquid on a given surface changes introducing specific nanoparticles at the interface. This Introduction aspect is of special interest in Biology and Medicine, especially due More and more the nanotechnology is becoming important to the impact on the protein absorption and the cellular response in and promising in different fields of the science.
    [Show full text]
  • Inverse Gas Chromatography in the Examination of Adhesion Between
    www.nature.com/scientificreports OPEN Inverse gas chromatography in the examination of adhesion between tooth hard tissues and restorative dental materials Zuzanna Buchwald1*, Beata Czarnecka2 & Adam Voelkel1 The adhesion is a crucial issue in the bonding of dental restorative materials to tooth hard tissues. A strong and durable bond between artifcial and natural materials is responsible for the success of the restoration in the oral cavity; therefore it has to be thoroughly examined before new restorative material is introduced to the market and used clinically. Among all methods used to examine bonding strength, most of them require a large number of healthy teeth to be conducted. In this paper, the bond strength between tooth hard tissues (dentin and enamel) and an exemplary restorative composite was examined with the non-conventional method, i.e. inverse gas chromatography. Dentin and enamel from bovine teeth were separated and subjected to the standard preparation procedure using the 3-component etch-and-rinse commercial bonding system. Tissues, as well as commercial restorative composite, were examined using inverse gas chromatography. The work of adhesion between dentin/enamel and composite was calculated. Obtained results were compared with the values of shear bond strength of six confgurations, i.e. etched dentin/enamel-composite, primed dentin/enamel-composite, and bonded dentin/enamel-composite. All obtained results proved that there is a correlation between the values describing bond strength obtained from inverse gas chromatography and direct mechanical tests (shear bond strength tests). It proves that inverse gas chromatography is a powerful perspective tool for the examination of bond strength between tooth hard tissues and potential dental materials without using a large number of health tooth tissues.
    [Show full text]
  • Forward Osmosis – a Brief Introduction
    Forward Osmosis – A Brief Introduction This paper outlines some of the aspects of Forward Osmosis process and its derivatives, with regard to key issues, concepts and some applications. By Peter G. Nicoll Forward Osmosis (FO) over the past five years has generally it is apparent that they are increasingly becoming a topic of some attracted more attention, both academically and commercially, interest. National Geographic [1] in an article in April 2010 cited it with a number of companies raising finance on the back of its as one of the three most promising new desalination technologies potential. The process exploits the natural process of osmosis, and at the last IDA World Congress in Perth, Australia in 2011, which is how plants and trees take up water from the soil – a low six papers were published on this subject. In the Journal of energy, natural process. It works by having two solutions with Membrane Science the number of papers published has seen a different concentrations (or more correctly different osmotic very significant increase over the last three years (24 in 2012), pressures) separated by a selectively permeable membrane, in the showing the increasing level of academic interest. We have also case of the plants and trees their cell walls, and ‘pure’ water flows seen the emergence of a number of commercial organisations from less concentrated solution across the membrane to dilute with significant funding to develop and exploit the technology the more concentrated solution, leaving the salts behind. The clue such as, Hydration Technology Innovations Inc, Modern Water in the potential applications is that it is widely used in nature, plc, Oasys Water Inc, Statkraft AS and Trevi Systems Inc.
    [Show full text]
  • Robust Omniphobic Surfaces
    Robust omniphobic surfaces Anish Tutejaa,1, Wonjae Choib,1, Joseph M. Mabryc, Gareth H. McKinleyb,2, and Robert E. Cohena,2 aDepartment of Chemical Engineering, bDepartment of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139; and cAir Force Research Laboratory, Propulsion Directorate, Edwards Air Force Base, CA 93524 Edited by John M. Prausnitz, University of California, Berkeley, CA, and approved September 26, 2008 (received for review May 20, 2008) Superhydrophobic surfaces display water contact angles greater angle. The question that arises is, ‘‘Which of these states is naturally than 150° in conjunction with low contact angle hysteresis. Micro- realized by any given surface, and how can one design textures that scopic pockets of air trapped beneath the water droplets placed on promote the formation of a composite interface for a given liquid?’’ these surfaces lead to a composite solid-liquid-air interface in The answer is determined by considering the overall free energy of thermodynamic equilibrium. Previous experimental and theoreti- the system comprising the liquid droplet, the surrounding vapor, cal studies suggest that it may not be possible to form similar and the textured solid surface (13, 16, 18, 19). The critical value of fully-equilibrated, composite interfaces with drops of liquids, such the equilibrium contact angle (␪c) beyond which the composite as alkanes or alcohols, that possess significantly lower surface interface leads to a lower overall free energy, in comparison to the ؍ ␥ tension than water ( lv 72.1 mN/m). In this work we develop fully wetted interface, can be determined by equating the Wenzel surfaces possessing re-entrant texture that can support strongly and Cassie-Baxter relations.
    [Show full text]
  • Inverse Gas Chromatography a Tool to Follow
    Inverse gas chromatography a tool to follow physicochemical modifications of pharmaceutical solids: Crystal habit and particles size surface effects María Graciela Cares Pacheco, Rachel Calvet, G. Vaca-Medina, A. Rouilly, Fabienne Espitalier To cite this version: María Graciela Cares Pacheco, Rachel Calvet, G. Vaca-Medina, A. Rouilly, Fabienne Espitalier. In- verse gas chromatography a tool to follow physicochemical modifications of pharmaceutical solids: Crystal habit and particles size surface effects. International Journal of Pharmaceutics, Elsevier, 2015, 494 (1), pp.113-126. 10.1016/j.ijpharm.2015.07.078. hal-01611017 HAL Id: hal-01611017 https://hal.archives-ouvertes.fr/hal-01611017 Submitted on 5 Sep 2018 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Inverse gas chromatography a tool to follow physicochemical modifications of pharmaceutical solids: Crystal habit and particles size surface effects a, a b,c b,c a M.G. Cares-Pacheco *, R. Calvet , G. Vaca-Medina , A. Rouilly , F. Espitalier a Université de Toulouse; Mines Albi, UMR CNRS 5302, Centre RAPSODEE; Campus Jarlard, F-81013 Albi cedex 09, France b Université de Toulouse; INP-ENSIACET, LCA, 310130 Toulouse, France c INRA; UMR 1010 CAI, 310130 Toulouse, France A B S T R A C T Powders are complex systems and so pharmaceutical solids are not the exception.
    [Show full text]
  • Wettability of Mineral and Metallic Powders: Applicability and Limitations of Sessile Drop Method and Washburn's Technique (2012) Powder Technology, 226, 68­77
    Susana, L., Campaci, F., Santomaso, A.C. Wettability of mineral and metallic powders: Applicability and limitations of sessile drop method and Washburn©s technique (2012) Powder Technology, 226, 68-77. (DOI: 10.1016/j.powtec.2012.04.016) Wettability of mineral and metallic powders: applicability and limitations of sessile drop method and Washburn’s technique Laura Susanaa, Filippo Campacib, Andrea C. Santomasoa,* a DII – Department of Industrial Engineering, University of Padova Via Marzolo 9, 35131, Padova, Italy b Fileur® - Trafilerie di Cittadella, Via Mazzini 69, 35013, Cittadella, Italy Corresponding author: Andrea Santomaso; email: [email protected] Keywords: Wettability; Contact angle; Minerals powders; Washburn's method Abstract Characterization of powder wettability is a prerequisite to the understanding of many processes of industrial relevance such as agglomeration which spans from pharmaceutical and food applications to metallurgical ones. The choice of the wetting fluid is crucial: liquid must wet the powder in order for agglomeration to be successful. Different methods for wettability assessment of powders were reported in the literature, however the sessile drop method and capillary rise test remain among the most widely employed because they are easy to perform and inexpensive. In this paper, the application and limitations of sessile drop method and capillary rise test on mineral and metallic surface were discussed. This work provides a collection of wettability measurements using several powders and liquid binders which are involved in the manufacturing process of welding wires. Moreover a new reference liquid for the calibration of capillary rise method was proposed. 1. Introduction Wet granulation of fine powders is carried out in many industries, from pharmaceutical and agrochemical industries to mineral and metallurgical ones, to improve physical and material properties of powders such as flowability, rate of dissolution and robustness to segregation [1–3].
    [Show full text]