IFS® Line / Fiber Transmission

V T/ VR2010

GE SpecificationsSeries IFS 2-Channel Video Multiplexer Security Video Input: 1 volt pk-pk (75 ohms) Bandwidth: 10 Hz - 10 MHz (typical) North America Differential Gain: <5% T 888-GE-SECURITY Differential Phase: <5° 888-437-3287 Tilt: <1% F 503-691-7566 Signal-to-Noise Ratio (SNR): 55 dB (typical) E [email protected] Wavelength 850 nm, Multimode Asia OVERVIEW STANDARD FEATURES T 852-2907-8108 Number of fibers 1 F 852-2142-5063 The IFS VT/VR2010 Series multiplexer simultaneously transmits two • FM Design Connectors channels of real-time video signals over one multimode optical fiber. • Transmits and Receives Two Real-Time Video Signals Australia and New Zealand Optical: ST The modules utilize (FM) to reduce ghosting, • 10 MHz Bandwidth Per Individual Channel T 613-9239-1200 Power and Audio: Terminal Block with Screw Clamps F 613-9239-1299 Video: jitter and cross-talk betweBNCen channels, (Gold Plated there Center-Pin) by providing superior • NTSC, PAL, SECAM Compatible video transmission. Plug-and-play design ensures ease of installation • Full Color Compatibility Electrical & Mechanical Europe requiring no electrical or optical adjustments. The modules incorpo- • Reduces Fiber/Cabling Cost T 32-2-719-9847 Power: F 32-2-719-9846 Surface Mount:rate power and carrier detect12 VDC status @ 450 indicating mA LED’s for monitoring • No In-field Electrical or Optical Adjustments Required Rack: proper system operation.From The modules Rack are available in either stand- • Power and Carrier Detect Status Indicating LED’s to Monitor Number of Rack Slots: 2 Latin America alone or rack mount version. System Performance T 305-593-4301 Current Protection: Automatic Resettable Solid-State Current Limiters • Hot-Swappable Rack Modules F 305-593-4300 Max. RG59 Cable Length: 750 ft. Circuit Board: Meets IPC Standard • Automatic Resettable Fuses on all Power Lines Size (in./cm.) (LxWxH) gesecurity.com/ifs • Comprehensive Lifetime Warranty Surface Mount:APPLICATION EXAMPLES7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm Specifications subject to Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm Shipping Weight: <2 lbs./0.9 kg change without notice • Installations with Limited Fiber • Retrofts/System Upgrades © 2008 General Electric Company Environmental All Rights Reserved MTBF: • Conduit with Limited Space> 100,000 for Additional hours Cabling Operating Temp: -40° C to +74° C Storage Temp: -40° C to +85° C Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating. Agency compliance System Design SYSTEM DESIGN Made in the USA Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J up to 1.2 miles (2 km) VT2010 VR2010

International International 2 Video Fiber Fiber Systems ifs Systems 2 Video Incorporated ifs Incorporated 203.426.1180 Inputs 1 Fiber 203.426.1180 Outputs 62.5/125μm MM

interlogix.com Ordering Information Part Number Description Fibers Required Optical Pwr. Budget Max. Distance*

Multimode VT2010 2 Channel Video /Multiplexer (850 nm) 1 10 dB 1.2 miles (2 km)*** 62.5/125μm** VR2010 2 Channel Video Receiver/Demultiplexer (850 nm)

Accessories♦ PS-12 VDC 12 Volt DC Plug-in Power Supply (Included) PS-12 VDC 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

Options Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately) Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)

* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget. *** This product may be used with 62.5μm graded index multimode fiber having a maximum run length of 2 km and/or a maximum optical loss of 10 dB. ♦All accessories are third party manufactured. North America Latin America VT/VR2010 Series T 855-286-8889 T 561-998-6114 IFS 2-Channel Video Multiplexer

Ordering Information

Part Number Description Fibers Required Optical Pwr. Budget Max. Distance* Multimode 62.5/125µm** VT2010 2-Channel Video Transmitter/Multiplexer (850 nm) 1 10 dB 1.2 miles (2 km)*** VR2010 2-Channel Video Receiver/Demultiplexer (850 nm) 1 10 dB 1.2 miles (2 km)*** Accessories ♦ PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included) Options Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)

*Optical transmission distance is limited to optical loss of the fber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. *** This product may be used with 62.5 µm graded index multimode fber having a maximum run length of 2 km and/or a maximum optical loss budget of 10 dB. ♦All accessories are third party manufactured.

GE Specifications Specifications Data Security Data Interface: RS-232 (data lines only), or RS-422 (see note) Video Data Rate: DC - 1.5 Mbps (NRZ) Operating Mode: Asynchronous Simplex or Full-Duplex Video Input: 1 Volt pk-pk (75 ohms) North America Bit Error Rate: <1 in 10˚ Bandwidth: 10 Hz - 10 MHz (Typical) T 888-GE-SECURITY 888-437-3287 Wavelength D1010: 850 nm, MM D1010WDMA: 850/1310 nm, MM : <5% F 503-691-7566 D1010WDMB: 1310/850 nm, MM D1020: 1310 nm, MM : <5° E [email protected] D1030: 1310 nm, SM D1030WDMA: 1310 nm, SM D1030WDMB: 1550 nm, SM Tilt: <1% Asia Signal-to-Noise Ratio (SNR): 55 dB (typical) T 852-2907-8108 Number Of Fibers D1010: 2 D1010WDMA: 1 D1010WDMB: 1 D1020: 2 F 852-2142-5063 D1030: 2 D1030WDMA: 1 D1030WDMB: 1 Wavelength 850 nm, Multimode Australia and New Zealand Connectors T 613-9239-1200 Optical: ST Number Of Fibers F 613-9239-1299 Data and Power: Terminal Block with Screw Clamps 1 Europe Electrical & Mechanical Connectors T 44-113-238-1668 Power: Optical: ST F 44-113-253-8121 Surface Mount: 12 VDC @ 150 mA Rack: From Rack Power and Audio: Terminal Block with Screw Clamps Latin America Number of Rack Slots: 1 Video: BNC (Gold Plated Center-Pin) T 305-593-4301 Current Protection: Automatic Resettable Solid-State Current Limiters F 305-593-4300 Circuit Board: Meets IPC Standard Electrical & Mechanical Size (in./cm.) (LxWxH) Power: gesecurity.com/ifs Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm Surface Mount: 12 VDC @ 450 mA Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm Specifications subject to Shipping Weight: < 2 lbs./0.9 kg Rack: From Rack change without notice Number of Rack Slots: 2 Agency Compliance Environmental © 2008 General Electric Company MTBF: > 100,000 hours Current Protection: Automatic Resettable Solid-State Current Limiters CompliesAll Rights with Reserved FDA Performance Operating Temp: -40° C to +74° C Standard for Laser Products, Title 21, Max. RG59 Cable Length: 750 ft. Storage Temp: -40° C to +85° C Code of Federal Regulations, Subchapter J Relative Humidity: 0% to 95% (non-condensing)† Circuit Board: Meets IPC Standard Size (in./cm.) (LxWxH) †May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating. Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm Made in the USA NOTE: The D1010 Series is compatible with some RS-485 (4-wire) systems, consult factory. Shipping Weight: < 2 lbs./0.9 kg Complies with FDA Performance Standard for Laser Products, Title 21, Environmental Code of Federal Regulations, Subchapter J MTBF: > 100,000 hours Operating Temp: -40° C to +74° C Ordering Information Storage Temp: -40° C to +85° C Part Number Description Fibers Required Opt. Pwr. Budget Max. Distance* Relative Humidity: 0% to 95% (non-condensing) interlogix.comD1010 RS-232/RS-422 Data Transceiver (850 nm) 2 14 dB 2.5 miles (4 km) Multimode D1010WDMA✧ RS-232/RS-422 Data Transceiver (850/1310 nm) 1 14 dB 2.5 miles (4 km) Speci fcations subject62.5/125µm** to change withoutD1010WDMB notice. RS-232/RS-422 Data Transceiver (1310/850 nm) 1 14 dB 2.5 miles (4 km) D1020 RS-232/RS-422 Data Transceiver (1310 nm) 2 13 dB 8 miles (13 km) © 2014 United Technologies Corporation All rightsD1030 reserved. RS-232/RS-422 Data Transceiver (1310 nm) 2 Interlogix is part of UTC BuildingSingle Mode & IndustrialD1030WDMA Systems, ✧ RS-232/RS-422 Data Transceiver (1310 nm) 1 20 dB 37 miles (60 km) a unit of United9/125µm Technologies Corporation.D1030WDMB RS-232/RS-422 Data Transceiver (1550 nm) 1 VT/VR2100 Series Accessories♦ PS-12VDC 12 Volt DC Plug-in Power Supply (Included) PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)

Options Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately) Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)

*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦ All accessories are third party manufactured. ✧ WDMA must mate with a WDMB.

up to 2.5 miles (4 km) D1010 D1010

International International Fiber Fiber Systems Systems ifs Incorporated Incorporated 203.426.1180 ifs 203.426.1180 *Note: Unit can be used for transmission of RS-232 RS-232 RS-232 or RS-422, but not simultaneously or 2 Fibers or Remote RS-422* 62.5/125µm MM RS-422* up to 2.5 miles Host 1. Point to point (dual fiber) (4 km) D1010WDMA D1010WDMB

International International Fiber Fiber Systems Systems ifs Incorporated ifs Incorporated 203.426.1180 203.426.1180 RS-232 1 Fiber RS-232 Remote or 62.5/125µm MM or RS-422* RS-422*

Host 2. Point to point (single fiber)