DOCSLIB.ORG

Collectors' Models Saturday 14 August 2010 10:00

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Collectors' Models Saturday 14 August 2010 10:00 Collectors' Models Saturday 14 August 2010 10:00 Lacy Scott & Knight The Auction Centre 10 Risbygate Street Bury St Edmunds IP33 3AA Lacy Scott & Knight (Collectors' Models) Catalogue - Downloaded from UKAuctioneers.com Lot: 1 Lot: 7 5 boxes containing quantity of Manufacturer's instruction hard and soft cover books, booklets for The 'Metcalfe' preserved railway and railway Vacuum Brake Ejector and class tour guides, etc A Exhaust Steam Injector Estimate: £30.00 - £40.00 (marked office copy) Estimate: £25.00 - £35.00 Lot: 2 Lot: 8 Approx 50 hard and soft cover, Bowman Models Ltd, steam mainly railway related books launch, 'Swallow' wooden hull, including 'British Joint Lines' single oscillating cylinder, Caserley, 'Midland Steam' Tuplin, Bowman transfer on rear deck 'Newcastle and 'Carlisle Railway' with spirit burner, spray deck Maclean, etc overpainted, original box (Illus) Estimate: £40.00 - £60.00 Estimate: £140.00 - £160.00 Lot: 3 Lot: 9 Drivers' copy of 'Instructions to Dewrance & Co. London GWR Drivers for Running and Tending vacuum brake gauge 0-30 inches the Atkinson Steam Motor of mercury with display plinth in Waggon' (sic), well used copy copper (Illus) Estimate: £18.00 - £25.00 Estimate: £30.00 - £40.00 Lot: 4 Lot: 10 Quantity of hard and soft cover Great Western Railway pocket books relating to industrial steam watch engraved on back case and diesel locomotives, etc GWR 2318 with subsidiary Estimate: £30.00 - £40.00 seconds dial (Illus) Estimate: £400.00 - £500.00 Lot: 5 Lot: 11 16 soft cover booklets including MDS Ripmax 0.28 Pro Aero ABC series, Locoshed books and engine with C2 carburettor and others, The Railway Photographs silencer boxed as new and with issues 1&2, 'Engines of War' instructions, sold with a Lucas Wildish, Snowdon Mountain Calcia Cadet Carbide lamp as Railway, etc, all appear c.1940s, removed '50s, '60s Estimate: £35.00 - £50.00 Estimate: £25.00 - £35.00 Lot: 6 Lot: 12 Hand book for Railway Steam Halfords, code 175935 3-drawer Locomotive Enginemen, 5 BR portable chest (steel) as new in operating instructions for diesel sealed bag shunting locomotives, 4 others Estimate: £20.00 - £25.00 for Sulzer powered classes, copies of public and working timetables 1980s, 1990s etc Estimate: £18.00 - £25.00 1 of 126 Lacy Scott & Knight (Collectors' Models) Catalogue - Downloaded from UKAuctioneers.com Lot: 13 Lot: 19 Tray of various lathe tools Stuart 504 stationary boiler 3" dia including 2 chucks, 2 micrometer, x 10 inches built up with Duplex caliper, fixed steady, 35x burner, looks unfired machine reamers Estimate: £280.00 - £320.00 Estimate: £25.00 - £30.00 Lot: 14 Lot: 20 Bing Bavaria Line shaft with cast From Plastow kit, 3 inch scale 6 supports on wood base with drive NHP Burrell traction engine, part and 7 take off pulley wheels plus built and fitted with tested boiler with 4 workshop tools, lathe, a certificate dated 28.6.07 Bing drill, a table saw, and table (hydraulic), boiler, fire box and grinder (5) cylinder and cranks assembled, Estimate: £75.00 - £100.00 wheels and front axle assembly made up, bunker part constructed with extra parts and drawings Lot: 15 Estimate: £4,000.00 - £5,000.00 Workshop toy in the form of a workbench, unmarked and with bench saw, 2 bench vices (cast) Lot: 21 and a trip hammer, all on wooden Builders plates 'IMC' 1972, base, fair for age Powell Duffyn Cardiff, WH Allen Estimate: £30.00 - £40.00 & Co. Ltd. Bedford, Samuel Lund & Sons Keighley and Daniel Adamson & Co. Ltd. DuKingfield (5) as removed Estimate: £30.00 - £40.00 Lot: 16 2 workshop toys, man with grinder in tinplate plus a large grinder on stand with wood base Lot: 22 Estimate: £40.00 - £50.00 Wagon plates, Cambrian Cardiff, LMS 1944, and Esso Petroleum No. 1285 (3) restored Estimate: £30.00 - £40.00 Lot: 17 Unmarked tinplate workshop toy, man cutting log on bench saw and man sawing pipe on Lot: 23 reciprocating saw Quantity of model railway related Estimate: £25.00 - £30.00 books, magazines, catalogues, postcards and other ephemera Estimate: £20.00 - £30.00 Lot: 18 An 'antique' 4 flue boiler with stand for burner built in with sight glass and various valves plus a part boiler for toy engine (a/f) Estimate: £50.00 - £60.00 2 of 126 Lacy Scott & Knight (Collectors' Models) Catalogue - Downloaded from UKAuctioneers.com Lot: 24 Lot: 29 Railway related hard covers to Hornby Railways, 3.5 inch gauge include The Best of Eric Treacy, G 104 coach with unapplied The Gresley Pacifics by OS decal sheet and instructions, no Nock, etc, plus one soft cover damage seen, original box and Estimate: £20.00 - £30.00 sleeve (VG) (Illus) Estimate: £100.00 - £120.00 Lot: 25 Lot: 30 Minilor TR-1 screw cutting centre Petrol engine with single cylinder lathe and milling attachment driving 4 inch flywheel, looks suitable for model making with scratch built, mounted on instructions and sales literature hardwood base 7 inches x 10 as featured in Model Engineer inches (Illus) July-August 1992 Estimate: £80.00 - £100.00 Estimate: £100.00 - £140.00 Lot: 26 Lot: 31 Exhibition quality scratch built, 36 Mamod SC1 steam car in cream inch model cargo-passenger liner with red chassis and wheels, 'Avon', formerly 'Penang', spirit burner, good condition, no unpowered, built by M Cutler of box, sold with a replica vintage Sheffield, from articles in Model taxi marked JBN (x2) Engineer 1947. Awarded bronze Estimate: £40.00 - £60.00 medal in Model Engineer Exhibition of 1951 and sold with this medal and SSMS Diploma shield 1953 with this shield. Motor has been removed. Finely built and detailed from scrap Lot: 32 Railway signs, running in boards metal and orange boxes etc and Welwyn Garden City and with various literature describing Northumberland Park, corrosion the model. Presented on a and wear, sold with a wooden painted boat stand which framed/glazed print GWR King fits inside a wooden carry case Class 4-6-0 King George V (3) and with a 1950 diploma shield Estimate: £20.00 - £25.00 and display card showing stages of construction for small components (Illus) Estimate: £500.00 - £600.00 Lot: 33 Mamod SR 1A steam roller with Lot: 27 spirit burner, control rods, funnel, Mamod, SW1 steam wagon in looks unused and boxed with green with white and red trim, packing, fine example (Illus) unused and in original box with Estimate: £40.00 - £60.00 card inserts, and remote steering rod (Illus) Estimate: £100.00 - £150.00 Lot: 34 Possibly "trench art" WWI tank in Lot: 28 brass and iron, plus AA badge Hornby Railways 'Stephensons GE04542, 'Marshall' alloy plate, Rocket' 3 inch gauge with tender 'Mineapolis-Molie' alloy plate, but no track sold with one G-104 and a badge (5) coach (step missing), engine little Estimate: £30.00 - £50.00 used (Illus) Estimate: £80.00 - £100.00 3 of 126 Lacy Scott & Knight (Collectors' Models) Catalogue - Downloaded from UKAuctioneers.com Lot: 35 Estimate: £2,000.00 - £2,500.00 9 railway related books including ABC Motive Power Combined 1985, 1986, 1987, and 1988 Lot: 41 Estimate: £15.00 - £20.00 5" gauge riding trolley with built in water bottle, 4 wheel chassis, sprung and with brakes on all wheels, LMS builders plate on rear Estimate: £100.00 - £120.00 Lot: 36 A 2" gauge 4-6-2 spirit fired tank engine, painted Great Central green No. 447, possibly a Lot: 42 restored Baldwin & Wills model, Hornby Railways 3.5" gauge complete with catalogue and Rocket and tender, unboxed and photograph of prototype (Illus) with chimney missing Estimate: £1,200.00 - £1,500.00 Estimate: £30.00 - £40.00 Lot: 37 Military (we are informed by vendor) jerry can with spout, plus a small quantity of modern Lot: 43 Meccano, and various motors Large scale, scratch built from and R/C sundries for model brass and bronze with 9" iron boats, plus drawings for boats flywheel, beam engine with 5" and large quantity catalogues stroke approx 2" bore cylinder, Estimate: £40.00 - £60.00 on wood base 22" x 16", height 21", needs cleaning up to make an elegant model with age (Henry page divider Illus.) Lot: 38 Estimate: £400.00 - £450.00 Collection of assorted Railway related x21 hard cover books plus 3 'History of Railways' bound copies Lot: 44 Estimate: £25.00 - £35.00 Stuart Turner beam engine port built and with plans and parts list and with additional castings, unchecked for completeness Estimate: £200.00 - £240.00 Lot: 39 Single cylinder horizontal mill engine with valve chest marked KB, with 15cm fly wheel mounted on wood base 14" x 6" (Illus) Lot: 45 Estimate: £100.00 - £150.00 Tinplate early 20th century steam plant marked D&Co. 864/2 (Doll Germany ?), with brass boiler, burner missing, single cylinder engine with governor, slip eccentric slide valve and water pump lubrication pots on Lot: 40 lithograph tin base with steel sub From Reeves Castings and to frame, good quality (Illus) Dick Simmonds design 5" gauge Estimate: £180.00 - £220.00 0-4-0 tank locomotive 'Ajax', powerful and straightforward with Walschaerts gear, BR early crest black unlined finish, good access to back head controls, cab roof cover missing, with expired boiler certificates, invoices and photographs (Illus) 4 of 126 Lacy Scott & Knight (Collectors' Models) Catalogue - Downloaded from UKAuctioneers.com Lot: 46 Lot: 52 Dewrance, London, Duplex test A Victory Industries Vosper RAF gauge for gases calibrated 0- Crash Tender, electric, missing 1000 units of measure not masts but generally free from indicated, good for display (Illus) fatigue, one corner of box lid split Estimate: £50.00 - £60.00 Estimate: £30.00 - £40.00 Lot: 47 Lot: 53 Vintage cast iron boiler with 15 A wooden hulled
Load more

Recommended publications
  • Rocket Propulsion Fundamentals 2
    https://ntrs.nasa.gov/search.jsp?R=20140002716 2019-08-29T14:36:45+00:00Z Liquid Propulsion Systems – Evolution & Advancements Launch Vehicle Propulsion & Systems LPTC Liquid Propulsion Technical Committee Rick Ballard Liquid Engine Systems Lead SLS Liquid Engines Office NASA / MSFC All rights reserved. No part of this publication may be reproduced, distributed, or transmitted, unless for course participation and to a paid course student, in any form or by any means, or stored in a database or retrieval system, without the prior written permission of AIAA and/or course instructor. Contact the American Institute of Aeronautics and Astronautics, Professional Development Program, Suite 500, 1801 Alexander Bell Drive, Reston, VA 20191-4344 Modules 1. Rocket Propulsion Fundamentals 2. LRE Applications 3. Liquid Propellants 4. Engine Power Cycles 5. Engine Components Module 1: Rocket Propulsion TOPICS Fundamentals • Thrust • Specific Impulse • Mixture Ratio • Isp vs. MR • Density vs. Isp • Propellant Mass vs. Volume Warning: Contents deal with math, • Area Ratio physics and thermodynamics. Be afraid…be very afraid… Terms A Area a Acceleration F Force (thrust) g Gravity constant (32.2 ft/sec2) I Impulse m Mass P Pressure Subscripts t Time a Ambient T Temperature c Chamber e Exit V Velocity o Initial state r Reaction ∆ Delta / Difference s Stagnation sp Specific ε Area Ratio t Throat or Total γ Ratio of specific heats Thrust (1/3) Rocket thrust can be explained using Newton’s 2nd and 3rd laws of motion. 2nd Law: a force applied to a body is equal to the mass of the body and its acceleration in the direction of the force.
    [Show full text]
  • L AUNCH SYSTEMS Databk7 Collected.Book Page 18 Monday, September 14, 2009 2:53 PM Databk7 Collected.Book Page 19 Monday, September 14, 2009 2:53 PM
    databk7_collected.book Page 17 Monday, September 14, 2009 2:53 PM CHAPTER TWO L AUNCH SYSTEMS databk7_collected.book Page 18 Monday, September 14, 2009 2:53 PM databk7_collected.book Page 19 Monday, September 14, 2009 2:53 PM CHAPTER TWO L AUNCH SYSTEMS Introduction Launch systems provide access to space, necessary for the majority of NASA’s activities. During the decade from 1989–1998, NASA used two types of launch systems, one consisting of several families of expendable launch vehicles (ELV) and the second consisting of the world’s only partially reusable launch system—the Space Shuttle. A significant challenge NASA faced during the decade was the development of technologies needed to design and implement a new reusable launch system that would prove less expensive than the Shuttle. Although some attempts seemed promising, none succeeded. This chapter addresses most subjects relating to access to space and space transportation. It discusses and describes ELVs, the Space Shuttle in its launch vehicle function, and NASA’s attempts to develop new launch systems. Tables relating to each launch vehicle’s characteristics are included. The other functions of the Space Shuttle—as a scientific laboratory, staging area for repair missions, and a prime element of the Space Station program—are discussed in the next chapter, Human Spaceflight. This chapter also provides a brief review of launch systems in the past decade, an overview of policy relating to launch systems, a summary of the management of NASA’s launch systems programs, and tables of funding data. The Last Decade Reviewed (1979–1988) From 1979 through 1988, NASA used families of ELVs that had seen service during the previous decade.
    [Show full text]
  • Development of a Reliable Performance Gas Generator of 75 Tonf-Class Liquid Rocket Engine for the Korea Space Launch Vehicle II
    DOI: 10.13009/EUCASS2019-521 8TH EUROPEAN CONFERENCE FOR AERONAUTICS AND SPACE SCIENCES (EUCASS) Development of a Reliable Performance Gas Generator of 75 tonf-class Liquid Rocket Engine for the Korea Space Launch Vehicle II Byoungjik Lim*, Munki Kim*, Donghyuk Kang*, Hyeon-Jun Kim*, Jong-Gyu Kim*, and Hwan-Seok Choi* *Korea Aerospace Research Institute 169-84, Gwahak-ro, Yuseong-Gu Daejeon, 34133, South Korea [email protected] Abstract In this paper, development history and result of a reliable performance gas generator of 75 tonf-class liquid rocket engine is described. Based on the experience acquired from the 30 tonf-class gas generator development, the almost identical concept was adopted to 75 tonf-class gas generator such as a coaxial swirl injector and a regeneratively cooled combustion chamber. During the entire development process using the full-scale and subscale technological demonstration model and development model up to now, combustion tests of over 430 times and cumulative time of over 17 700 seconds have been carried out for a 75 tonf-class gas generate. Now the 75 tonf-class fuel-rich gas generator shows very reliable and reproducible characteristics throughout the entire lifetime including the flight test which was done with the test launch vehicle in November 2018. Thus, it can be said that the development of a 75 tonf-class fuel rich gas generator which will be used in Korea first independent space launch vehicle, KSLV-II was finished successfully. 1. Introduction As a leading institute for technology which is related with space launch vehicle and a national space development agency in the Republic of KOREA, the Korea Aerospace Research Institute (KARI) has been continuously researching and developing technology related to space launch vehicles since establishment in 1989.
    [Show full text]
  • Materials for Liquid Propulsion Systems
    https://ntrs.nasa.gov/search.jsp?R=20160008869 2019-08-29T17:47:59+00:00Z CHAPTER 12 Materials for Liquid Propulsion Systems John A. Halchak Consultant, Los Angeles, California James L. Cannon NASA Marshall Space Flight Center, Huntsville, Alabama Corey Brown Aerojet-Rocketdyne, West Palm Beach, Florida 12.1 Introduction Earth to orbit launch vehicles are propelled by rocket engines and motors, both liquid and solid. This chapter will discuss liquid engines. The heart of a launch vehicle is its engine. The remainder of the vehicle (with the notable exceptions of the payload and guidance system) is an aero structure to support the propellant tanks which provide the fuel and oxidizer to feed the engine or engines. The basic principle behind a rocket engine is straightforward. The engine is a means to convert potential thermochemical energy of one or more propellants into exhaust jet kinetic energy. Fuel and oxidizer are burned in a combustion chamber where they create hot gases under high pressure. These hot gases are allowed to expand through a nozzle. The molecules of hot gas are first constricted by the throat of the nozzle (de-Laval nozzle) which forces them to accelerate; then as the nozzle flares outwards, they expand and further accelerate. It is the mass of the combustion gases times their velocity, reacting against the walls of the combustion chamber and nozzle, which produce thrust according to Newton’s third law: for every action there is an equal and opposite reaction. [1] Solid rocket motors are cheaper to manufacture and offer good values for their cost.
    [Show full text]
  • Fastrac Engine: Understanding Technical Implications of Programmatic Decisions
    Fastrac Engine: Understanding Technical Implications of Programmatic Decisions Mary Beth Koelbl Katherine Van Hooser 7/28/15 Outline I. Introduction and Objective of Presentation II. Background and Landscape A. Engine Developments B. Fastrac Origins and the Government-Led Approach C. Implementation III. Transition from Manned Space Flight to Faster Better Cheaper A. Fastrac Features B. Lessons Learned IV. Fastrac History V. Program Legacy Background and Landscape • There was significant hiring at MSFC in the late 1980’s and early 1990’s. The center was immersed in Challenger Return-to-Flight and Shuttle upgrades, but little else • By the mid 1990’s, recognizing the need to train the new generation of engineers who were lacking in development expertise, MSFC management decided to take action o Propulsion and Materials management knew that engine developments were difficult and costly o They needed to create an opportunity themselves so they focused on in-house designed component technologies o Simplex Turbopump and 40k Thrust Chamber Assembly began; focused on 15 to 40k thrust applications such as Bantam Background and Landscape • In the Mid 1990s, leveraging the component technology effort, an in- house rocket engine design and development project was initiated • The Objectives were to o Demonstrate low cost engine in a faster, better, cheaper way of doing business. Including utilizing non-traditional suppliers o Give the younger propulsion engineers real hands-on hardware and cradle-to-grave design experience. • A test-bed / prototype engine design and hardware project, conducted entirely in-house, was chosen as an effective way of accomplishing these objectives • Initially envisioned a test-bed for the Bantam Booster, low cost design with a 2 Year Development; eventually became a 60k engine design First and Only Large Rocket Engine Developed in-House at NASA 4 Background and Landscape System Req.
    [Show full text]
  • 발사체 소형엔진용 적층제조 기술 동향 Technology Trends
    Journal of the Korean Society of Propulsion Engineers Vol. 24, No. 2, pp. 73-82, 2020 73 Technical Paper DOI: https://doi.org/10.6108/KSPE.2020.24.2.073 발사체 소형엔진용 적층제조 기술 동향 이금오 a, * ․ 임병직 a ․ 김대진 b ․ 홍문근 c ․ 이기주 a Technology Trends in Additively Manufactured Small Rocket Engines for Launcher Applications Keum-Oh Lee a, * ․ Byoungjik Lim a ․ Dae-Jin Kim b ․ Moongeun Hong c ․ Keejoo Lee a a Future Launcher R&D Program Office, Korea Aerospace Research Institute, Korea b Turbopump Team, Korea Aerospace Research Institute, Korea c Launcher Propulsion Control Team, Korea Aerospace Research Institute, Korea * Corresponding author. E-mail: [email protected] ABSTRACT Additively manufactured, small rocket engines are perhaps the focal activities of space startups that are developing low-cost launch vehicles. Rocket engine companies such as SpaceX and Rocket Lab in the United States, Ariane Group in Europe, and IHI in Japan have already adopted the additive manufacturing process in building key components of their rocket engines. In this paper on technology trends, an existing valve housing of a rocket engine is chosen as a case study to examine the feasibility of using additively manufactured parts for rocket engines. 초 록 저비용 발사체를 개발 중인 많은 스타트업들이 소형 로켓 엔진을 확보하기 위해 적층제조 기법을 개발 중이다. 또한, 미국의 SpaceX, Rocket Lab 등을 비롯하여, 유럽의 Ariane Group, 일본의 IHI와 같은 엔진 제작업체들은 로켓 엔진의 주요부품에 적층제조를 채택하여 생산하고 있다. 본 논문에서 는 적층제작기법의 타당성을 조사하기 위해서 기존 로켓 엔진의 밸브 하우징을 적층제조 하는 사례 연구 결과를 소개한다. Key Words: Additive Manufacturing(적층제조), 3D Printing(3D 프린팅), Liquid Rocket Engine(액체 로켓엔진), Thrust Chamber(연소기), Turbopump(터보펌프), Valve(밸브) 1.
    [Show full text]
  • Los Motores Aeroespaciales, A-Z
    Sponsored by L’Aeroteca - BARCELONA ISBN 978-84-608-7523-9 < aeroteca.com > Depósito Legal B 9066-2016 Título: Los Motores Aeroespaciales A-Z. © Parte/Vers: 1/12 Página: 1 Autor: Ricardo Miguel Vidal Edición 2018-V12 = Rev. 01 Los Motores Aeroespaciales, A-Z (The Aerospace En- gines, A-Z) Versión 12 2018 por Ricardo Miguel Vidal * * * -MOTOR: Máquina que transforma en movimiento la energía que recibe. (sea química, eléctrica, vapor...) Sponsored by L’Aeroteca - BARCELONA ISBN 978-84-608-7523-9 Este facsímil es < aeroteca.com > Depósito Legal B 9066-2016 ORIGINAL si la Título: Los Motores Aeroespaciales A-Z. © página anterior tiene Parte/Vers: 1/12 Página: 2 el sello con tinta Autor: Ricardo Miguel Vidal VERDE Edición: 2018-V12 = Rev. 01 Presentación de la edición 2018-V12 (Incluye todas las anteriores versiones y sus Apéndices) La edición 2003 era una publicación en partes que se archiva en Binders por el propio lector (2,3,4 anillas, etc), anchos o estrechos y del color que desease durante el acopio parcial de la edición. Se entregaba por grupos de hojas impresas a una cara (edición 2003), a incluir en los Binders (archivadores). Cada hoja era sustituíble en el futuro si aparecía una nueva misma hoja ampliada o corregida. Este sistema de anillas admitia nuevas páginas con información adicional. Una hoja con adhesivos para portada y lomo identifi caba cada volumen provisional. Las tapas defi nitivas fueron metálicas, y se entregaraban con el 4 º volumen. O con la publicación completa desde el año 2005 en adelante. -Las Publicaciones -parcial y completa- están protegidas legalmente y mediante un sello de tinta especial color VERDE se identifi can los originales.
    [Show full text]
  • On the X-34 FASTRAC – Memorandums of Misunderstanding
    https://ntrs.nasa.gov/search.jsp?R=20160005660 2019-08-31T03:30:34+00:00Z View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by NASA Technical Reports Server National Aeronautics and Space Administration NASA Case Study MSFC-CS1001-1 By Lakiesha V. Hawkins and Jim E. Turner Rev. 09/15/15 On the X-34 FASTRAC – Memorandums of Misunderstanding Engineers at MSFC designed, developed, and tested propulsion systems that helped launch Saturn I, IB, and V boosters for the Apollo missions. After the Apollo program, Marshall was responsible for the design and development of the propulsion elements for the Shuttle launch vehicle, including the solid rocket boosters, external tank and main engines. Each of these systems offered new propulsion technological challenges that pushed engineers and administrators beyond Saturn. The technical challenges presented by the development of each of these propulsion systems helped to establish and sustain a culture of engineering conservatism and was often accompanied by a deep level of penetrationi into contractors that worked on these systems. The FASTRAC Engine Project Figure 1 FASTRAC engine (NASA) In the middle of the 1990s NASA was pushing to lower the cost and development time of access to space. One of the targets to lower barriers to space access was the cost of propulsion systems. NASA sought to prove to itself and to the propulsion community that a new propulsion system could be built much cheaper and much faster than in the past. In fact, the propulsion community within NASA MSFC sought to go from a ‘clean sheet’ engine design to having the engine in a test stand in 2 years.
    [Show full text]
  • The Annual Compendium of Commercial Space Transportation: 2017
    Federal Aviation Administration The Annual Compendium of Commercial Space Transportation: 2017 January 2017 Annual Compendium of Commercial Space Transportation: 2017 i Contents About the FAA Office of Commercial Space Transportation The Federal Aviation Administration’s Office of Commercial Space Transportation (FAA AST) licenses and regulates U.S. commercial space launch and reentry activity, as well as the operation of non-federal launch and reentry sites, as authorized by Executive Order 12465 and Title 51 United States Code, Subtitle V, Chapter 509 (formerly the Commercial Space Launch Act). FAA AST’s mission is to ensure public health and safety and the safety of property while protecting the national security and foreign policy interests of the United States during commercial launch and reentry operations. In addition, FAA AST is directed to encourage, facilitate, and promote commercial space launches and reentries. Additional information concerning commercial space transportation can be found on FAA AST’s website: http://www.faa.gov/go/ast Cover art: Phil Smith, The Tauri Group (2017) Publication produced for FAA AST by The Tauri Group under contract. NOTICE Use of trade names or names of manufacturers in this document does not constitute an official endorsement of such products or manufacturers, either expressed or implied, by the Federal Aviation Administration. ii Annual Compendium of Commercial Space Transportation: 2017 GENERAL CONTENTS Executive Summary 1 Introduction 5 Launch Vehicles 9 Launch and Reentry Sites 21 Payloads 35 2016 Launch Events 39 2017 Annual Commercial Space Transportation Forecast 45 Space Transportation Law and Policy 83 Appendices 89 Orbital Launch Vehicle Fact Sheets 100 iii Contents DETAILED CONTENTS EXECUTIVE SUMMARY .
    [Show full text]
  • Methodology for Identifying Key Parameters Affecting Reusability for Liquid Rocket Engines
    Methodology for Identifying Key Parameters Affecting Reusability for Liquid Rocket Engines Presented by: Bruce Askins Rhonda Childress-Thompson Marshall Space Flight Center & Dr. Dale Thomas The University of Alabama in Huntsville Outline • Objective • Reusability Defined • Benefits of Reusability • Previous Research • Approach • Challenges • Available Data • Approach • Results • Next Steps • Summary Objective • To use statistical techniques to identify which parameters are tightly correlated with increasing the reusability of liquid rocket engine hardware. Reusability/Reusable Defined Ideally • “The ability to use a system for multiple missions without the need for replacement of systems or subsystems. Ideally, only replenishment of consumable commodities (propellant and gas products, for instance)occurs between missions.” (Jefferies, et al., 2015) For purposes of this research • Any space flight hardware that is not only designed to perform multiple flights, but actually accomplishes multiple flights. Benefits of Reusability • Forces inspections of returning hardware • Offers insight into how a part actually performs • Allows the development of databases for future development • Validates ground tests and analyses • Allows the expensive hardware to be used multiple times Previous Research – Identification of Features Conducive for Reuse Implementation 1. Reusability Requirement Implemented at the Conceptual Stage 2. Continuous Test Program 3. Minimize Post-Flight Inspections & Servicing to Enhance Turnaround Time 4. Easy Access 5. Longer Service Life 6. Minimize Impact of Recovery 7. Evolutionary vs. Revolutionary Changes MSFC Legacy of Propulsion Excellence (Evolutionary Changes) Saturn V J-2S 1970 1980 1990 2000 2010 2015 Challenges • Engine data difficult to locate • Limited data for reusable engines (i.e. Space Shuttle, Space Shuttle Main Engine (SSME) and Solid Rocket Booster (SRB) • Benefits of reusability have not been validated • Industry standards do not exist Engine Data Available Engine Time from No.
    [Show full text]
  • AIAA 2000-3401 NASA Fastrac Engine Gas Generator Component Test Program and Results
    AIAA 2000-3401 NASA Fastrac Engine Gas Generator Component Test Program and Results Henry J. Dennis, Jr. and Tim Sanders NASA Marshall Space Flight Center Huntsville, AL 36 th AIAA/ASME/SAE/ASEE Joint Propulsion Conference 17-19 July 2000 Huntsville, Alabama For permission to copy or to republish, contact the American Institute of Aeronautics and Astronautics, 1801 Alexander Bell Drive, Suite 500, Reston, VA, 20191-4344. AIAA-2000-3401 NASA FASTRAC ENGINE GAS GENERATOR COMPONENT TEST P[-?.OGRAM AND RESITLTS H. J. Dennis. Jr. and T. Sanders NASA Marshall Space Flight Center Huntsville, Alabama 35812 tmiformit 3 characteristics of the GG and determine the injector-to-chanaber _all compatibility. The GG Lo'_v cost access to space has been a long-time goal of the National Aeronautics and Space Administration (NASA). The Fastrac engine program was begun at NASA's Marshall Space Flight Center to develop a 60,000-pound (60K) thrust, liquid oxygen/hydrocarbon (LOX/RP), gas generator-cycle booster engine for a fraction of the cost of similar engines in existence. To achieve this goal, off-the-shelf components and readily available materials and processes would have to be used. This paper will present the Fastrac gas generator (GG) design and the component level hot-fire test program and results. The Fastrac GG is a simple, 4- piece design that uses well-defined materials and processes for fabrication. Thirty-seven component level hot-fire tests were conducted at MSFC's component test stand #116 (TSII6) during 1997 and 1998. The GG was operated at all expected operating ranges of the Fastrac engine.
    [Show full text]
  • Materials for Liquid Propulsion Systems
    CHAPTER 12 Materials for Liquid Propulsion Systems John A. Halchak Consultant, Los Angeles, California James L. Cannon NASA Marshall Space Flight Center, Huntsville, Alabama Corey Brown Aerojet-Rocketdyne, West Palm Beach, Florida 12.1 Introduction Earth to orbit launch vehicles are propelled by rocket engines and motors, both liquid and solid. This chapter will discuss liquid engines. The heart of a launch vehicle is its engine. The remainder of the vehicle (with the notable exceptions of the payload and guidance system) is an aero structure to support the propellant tanks which provide the fuel and oxidizer to feed the engine or engines. The basic principle behind a rocket engine is straightforward. The engine is a means to convert potential thermochemical energy of one or more propellants into exhaust jet kinetic energy. Fuel and oxidizer are burned in a combustion chamber where they create hot gases under high pressure. These hot gases are allowed to expand through a nozzle. The molecules of hot gas are first constricted by the throat of the nozzle (de-Laval nozzle) which forces them to accelerate; then as the nozzle flares outwards, they expand and further accelerate. It is the mass of the combustion gases times their velocity, reacting against the walls of the combustion chamber and nozzle, which produce thrust according to Newton’s third law: for every action there is an equal and opposite reaction. [1] Solid rocket motors are cheaper to manufacture and offer good values for their cost. Liquid propellant engines offer higher performance, that is, they deliver greater thrust per unit weight of propellant burned.
    [Show full text]