Poly G7500 Command-Line API Reference Guide

Total Page：16

File Type：pdf, Size：1020Kb

Poly G7500 Command-Line API Reference Guide

REFERENCE GUIDE 3.0.0 | December 2019 | 3725-86004-002A Poly G7500 Command-Line API GETTING HELP For more information about installing, configuring, and administering Poly/Polycom products or services, go to Polycom Support. Plantronics, Inc. (Poly – formerly Plantronics and Polycom) 345 Encinal Street Santa Cruz, California 95060 © 2019 Plantronics, Inc. All rights reserved. Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. All other trademarks are the property of their respective owners. Contents Contents Before You Begin . 7 Audience, Purpose, and Required Skills . 7 Related Poly and Partner Resources . 7 Additional Command-Line API Resources . 7 Getting Started . 9 Enable SSH Access . 9 Access the Command-Line API Over SSH . 9 Enable Telnet Access . 9 Access the Command-Line API Over Telnet . 9 Enable Serial Port Access . 10 Access the Command-Line API Using a Serial Connection . 10 Command-Line API Reference . 11 About the Command-Line API . 11 addrbook . 15 advnetstats . 20 all register . 22 all unregister . 24 amxdd . 25 answer . 26 apiport . 27 audio3p5inputfaronly . 28 audiotransmitlevel . 29 autoanswer . 31 calendardiscovery . 32 calendardomain . 34 calendarmeetings . 35 calendarpassword . 39 calendarplaytone . 40 calendarprotocol . 41 calendarregisterwithserver . 42 calendarremindertime . 43 calendarresource . 44 calendarserver . 45 Poly, Inc. 1 Contents calendarshowpvtmeetings . 46 calendarstatus . 47 calendaruser . 48 callinfo . 49 callstate . 50 camera . 52 camera near tracking . 55 configdisplay . 58 configparam . 59 configpresentation . 60 contentauto . 61 daylightsavings . 62 defaultgateway . 63 dhcp . 64 dial . 65 dial addressbook_entry . 67 dns . 68 dynamicbandwidth . 69 e164ext . 70 echo . 71 echocanceller . 72 echoreply . 73 enableacousticfence . 74 enableaudioadd . 75 enablefirewalltraversal . 76 enablekeyboardnoisereduction . ..

227

Copy Link

Recommended publications

Cisco Telepresence Codec SX20 API Reference Guide
Cisco TelePresence SX20 Codec API Reference Guide Software version TC6.1 April 2013 Application Programmer Interface (API) Reference Guide Cisco TelePresence SX20 Codec D14949.03 SX20 Codec API Reference Guide TC6.1, April 2013. 1 Copyright © 2013 Cisco Systems, Inc. All rights reserved. Cisco TelePresence SX20 Codec API Reference Guide What’s in this guide? Table of Contents Introduction Using HTTP ....................................................................... 20 Getting status and configurations ................................. 20 TA - ToC - Hidden About this guide .................................................................. 4 The top menu bar and the entries in the Table of Sending commands and configurations ........................ 20 text anchor User documentation ........................................................ 4 Contents are all hyperlinks, just click on them to Using HTTP POST ......................................................... 20 go to the topic. About the API Feedback from codec over HTTP ......................................21 Registering for feedback ................................................21 API fundamentals ................................................................ 9 Translating from terminal mode to XML ......................... 22 We recommend you visit our web site regularly for Connecting to the API ..................................................... 9 updated versions of the user documentation. Go to: Password ........................................................................
[Show full text]
Shell Scripting with Bash
Introduction to Shell Scripting with Bash Charles Jahnke Research Computing Services Information Services & Technology Topics for Today ● Introductions ● Basic Terminology ● How to get help ● Command-line vs. Scripting ● Variables ● Handling Arguments ● Standard I/O, Pipes, and Redirection ● Control Structures (loops and If statements) ● SCC Job Submission Example Research Computing Services Research Computing Services (RCS) A group within Information Services & Technology at Boston University provides computing, storage, and visualization resources and services to support research that has specialized or highly intensive computation, storage, bandwidth, or graphics requirements. Three Primary Services: ● Research Computation ● Research Visualization ● Research Consulting and Training Breadth of Research on the Shared Computing Cluster (SCC) Me ● Research Facilitator and Administrator ● Background in biomedical engineering, bioinformatics, and IT systems ● Offices on both CRC and BUMC ○ Most of our staff on the Charles River Campus, some dedicated to BUMC ● Contact: [email protected] You ● Who has experience programming? ● Using Linux? ● Using the Shared Computing Cluster (SCC)? Basic Terminology The Command-line The line on which commands are typed and passed to the shell. Username Hostname Current Directory [username@scc1 ~]$ Prompt Command Line (input) The Shell ● The interface between the user and the operating system ● Program that interprets and executes input ● Provides: ○ Built-in commands ○ Programming control structures ○ Environment
[Show full text]
Introduction to Linux – Part 1
Introduction to Linux – Part 1 Brett Milash and Wim Cardoen Center for High Performance Computing May 22, 2018 ssh Login or Interactive Node kingspeak.chpc.utah.edu Batch queue system … kp001 kp002 …. kpxxx FastX ● https://www.chpc.utah.edu/documentation/software/fastx2.php ● Remote graphical sessions in much more efficient and effective way than simple X forwarding ● Persistence - can be disconnected from without closing the session, allowing users to resume their sessions from other devices. ● Licensed by CHPC ● Desktop clients exist for windows, mac, and linux ● Web based client option ● Server installed on all CHPC interactive nodes and the frisco nodes. Windows – alternatives to FastX ● Need ssh client - PuTTY ● http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html - XShell ● http://www.netsarang.com/download/down_xsh.html ● For X applications also need X-forwarding tool - Xming (use Mesa version as needed for some apps) ● http://www.straightrunning.com/XmingNotes/ - Make sure X forwarding enabled in your ssh client Linux or Mac Desktop ● Just need to open up a terminal or console ● When running applications with graphical interfaces, use ssh –Y or ssh –X Getting Started - Login ● Download and install FastX if you like (required on windows unless you already have PuTTY or Xshell installed) ● If you have a CHPC account: - ssh [email protected] ● If not get a username and password: - ssh [email protected] Shell Basics q A Shell is a program that is the interface between you and the operating system
[Show full text]
The Linux Command Line
The Linux Command Line Fifth Internet Edition William Shotts A LinuxCommand.org Book Copyright ©2008-2019, William E. Shotts, Jr. This work is licensed under the Creative Commons Attribution-Noncommercial-No De- rivative Works 3.0 United States License. To view a copy of this license, visit the link above or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042. A version of this book is also available in printed form, published by No Starch Press. Copies may be purchased wherever fine books are sold. No Starch Press also offers elec- tronic formats for popular e-readers. They can be reached at: https://www.nostarch.com. Linux® is the registered trademark of Linus Torvalds. All other trademarks belong to their respective owners. This book is part of the LinuxCommand.org project, a site for Linux education and advo- cacy devoted to helping users of legacy operating systems migrate into the future. You may contact the LinuxCommand.org project at http://linuxcommand.org. Release History Version Date Description 19.01A January 28, 2019 Fifth Internet Edition (Corrected TOC) 19.01 January 17, 2019 Fifth Internet Edition. 17.10 October 19, 2017 Fourth Internet Edition. 16.07 July 28, 2016 Third Internet Edition. 13.07 July 6, 2013 Second Internet Edition. 09.12 December 14, 2009 First Internet Edition. Table of Contents Introduction....................................................................................................xvi Why Use the Command Line?......................................................................................xvi
[Show full text]
Shell Variables
Shell Using the command line Orna Agmon ladypine at vipe.technion.ac.il Haifux Shell – p. 1/55 TOC Various shells Customizing the shell getting help and information Combining simple and useful commands output redirection lists of commands job control environment variables Remote shell textual editors textual clients references Shell – p. 2/55 What is the shell? The shell is the wrapper around the system: a communication means between the user and the system The shell is the manner in which the user can interact with the system through the terminal. The shell is also a script interpreter. The simplest script is a bunch of shell commands. Shell scripts are used in order to boot the system. The user can also write and execute shell scripts. Shell – p. 3/55 Shell - which shell? There are several kinds of shells. For example, bash (Bourne Again Shell), csh, tcsh, zsh, ksh (Korn Shell). The most important shell is bash, since it is available on almost every free Unix system. The Linux system scripts use bash. The default shell for the user is set in the /etc/passwd ﬁle. Here is a line out of this ﬁle for example: dana:x:500:500:Dana,,,:/home/dana:/bin/bash This line means that user dana uses bash (located on the system at /bin/bash) as her default shell. Shell – p. 4/55 Starting to work in another shell If Dana wishes to temporarily use another shell, she can simply call this shell from the command line: [dana@granada ˜]$ bash dana@granada:˜$ #In bash now dana@granada:˜$ exit [dana@granada ˜]$ bash dana@granada:˜$ #In bash now, going to hit ctrl D dana@granada:˜$ exit [dana@granada ˜]$ #In original shell now Shell – p.
[Show full text]
Sleep 2.1 Manual
Sleep 2.1 Manual "If you put a million monkeys at a million keyboards, one of them will eventually write a Java program. The rest of them will write Perl programs." -- Anonymous Raphael Mudge Sleep 2.1 Manual Revision: 06.02.08 Released under a Creative Commons Attribution-ShareAlike 3.0 License (see http://creativecommons.org/licenses/by-sa/3.0/us/) You are free: • to Share -- to copy, distribute, display, and perform the work • to Remix -- to make derivative works Under the following conditions: Attribution. You must attribute this work to Raphael Mudge with a link to http://sleep.dashnine.org/ Share Alike. If you alter, transform, or build upon this work, you may distribute the resulting work only under the same, similar or a compatible license. • For any reuse or distribution, you must make clear to others the license terms of this work. The best way to do this is with a link to the license. • Any of the above conditions can be waived if you get permission from the copyright holder. • Apart from the remix rights granted under this license, nothing in this license impairs or restricts the author's moral rights. Your fair use and other rights are in no way affected by the above. Table of Contents Introduction................................................................................................. 1 I. What is Sleep?...................................................................................................1 II. Manual Conventions......................................................................................2 III.
[Show full text]
Netstat Statistics Comparison with Perl by Noah Davids
Netstat Statistics Comparison with Perl By Noah Davids Comparing sets of numeric output can be tiresome. Using the output from the netstat command helps diagnose problems. Over time, the changes in the statistics reported can be very informative.This article explains how this network specialist and Perl novice decided to write a program to do the comparison for him. INTRODUCTION THE SCRIPT Comparing sets of numeric output can be tedious, especially when The script expects as input a file with the following format: the numbers are large and there are a lot of them. Unfortunately it is Some number of random lines something I have to do fairly often. As a network support specialist, I Line with unique string indicating start of data set 1 often use the output from the netstat command to help diagnose Some fixed number of lines with the format: problems. Changes in the statistics reported over time can be very enlightening. In addition, as part of the support process, I have to LABEL NUMBER LABEL NUMBER LABEL include those differences in my written analysis. Punching the long numbers into a calculator and copying the answer back out is a drag. Some number of random lines Using cut and paste helps only marginally. Line with the same unique string indicating start of data 2 To make my life simpler, I decided to write a program to do the Some fixed number of lines with the format: comparison for me. However, I support four different operating sys- tems, and while each has a netstat command, the format and content LABEL NUMBER LABEL NUMBER LABEL of the output varies with each OS.
[Show full text]
The Linux Command Line Presentation to Linux Users of Victoria
The Linux Command Line Presentation to Linux Users of Victoria Beginners Workshop August 18, 2012 http://levlafayette.com What Is The Command Line? 1.1 A text-based user interface that provides an environment to access the shell, which interfaces with the kernel, which is the lowest abstraction layer to system resources (e.g., processors, i/o). Examples would include CP/M, MS-DOS, various UNIX command line interfaces. 1.2 Linux is the kernel; GNU is a typical suite of commands, utilities, and applications. The Linux kernel may be accessed by many different shells e.g., the original UNIX shell (sh), the TENEX C shell (tcsh), Korn shell (ksh), and explored in this presentation, the Bourne-Again Shell (bash). 1.3 The command line interface can be contrasted with the graphic user interface (GUI). A GUI interface typically consists of window, icon, menu, pointing-device (WIMP) suite, which is popular among casual users. Examples include MS-Windows, or the X- Window system. 1.4 A critical difference worth noting is that in UNIX-derived systems (such as Linux and Mac OS), the GUI interface is an application launched from the command-line interface, whereas with operating systems like contemporary versions of MS-Windows, the GUI is core and the command prompt is a native MS-Windows application. Why Use The Command Line? 2.1 The command line uses significantly less resources to carry out the same task; it requires less processor power, less memory, less hard-disk etc. Thus, it is preferred on systems where performance is considered critical e.g., supercomputers and embedded systems.
[Show full text]
APPENDIX a Aegis and Unix Commands
APPENDIX A Aegis and Unix Commands FUNCTION AEGIS BSD4.2 SYSS ACCESS CONTROL AND SECURITY change file protection modes edacl chmod chmod change group edacl chgrp chgrp change owner edacl chown chown change password chpass passwd passwd print user + group ids pst, lusr groups id +names set file-creation mode mask edacl, umask umask umask show current permissions acl -all Is -I Is -I DIRECTORY CONTROL create a directory crd mkdir mkdir compare two directories cmt diff dircmp delete a directory (empty) dlt rmdir rmdir delete a directory (not empty) dlt rm -r rm -r list contents of a directory ld Is -I Is -I move up one directory wd \ cd .. cd .. or wd .. move up two directories wd \\ cd . ./ .. cd . ./ .. print working directory wd pwd pwd set to network root wd II cd II cd II set working directory wd cd cd set working directory home wd- cd cd show naming directory nd printenv echo $HOME $HOME FILE CONTROL change format of text file chpat newform compare two files emf cmp cmp concatenate a file catf cat cat copy a file cpf cp cp Using and Administering an Apollo Network 265 copy std input to std output tee tee tee + files create a (symbolic) link crl In -s In -s delete a file dlf rm rm maintain an archive a ref ar ar move a file mvf mv mv dump a file dmpf od od print checksum and block- salvol -a sum sum -count of file rename a file chn mv mv search a file for a pattern fpat grep grep search or reject lines cmsrf comm comm common to 2 sorted files translate characters tic tr tr SHELL SCRIPT TOOLS condition evaluation tools existf test test
[Show full text]
ANSWERS ΤΟ EVEN-Numbered
8 Answers to Even-numbered Exercises 2.1. WhatExplain the following unexpected are result: two ways you can execute a shell script when you do not have execute permission for the file containing the script? Can you execute a shell script if you do not have read permission for the file containing the script? You can give the name of the file containing the script as an argument to the shell (for example, bash scriptfile or tcsh scriptfile, where scriptfile is the name of the file containing the script). Under bash you can give the following command: $ . scriptfile Under both bash and tcsh you can use this command: $ source scriptfile Because the shell must read the commands from the file containing a shell script before it can execute the commands, you must have read permission for the file to execute a shell script. 4.3. AssumeWhat is the purpose ble? you have made the following assignment: $ person=zach Give the output of each of the following commands. a. echo $person zach b. echo '$person' $person c. echo "$person" zach 1 2 6.5. Assumengs. the /home/zach/grants/biblios and /home/zach/biblios directories exist. Specify Zach’s working directory after he executes each sequence of commands. Explain what happens in each case. a. $ pwd /home/zach/grants $ CDPATH=$(pwd) $ cd $ cd biblios After executing the preceding commands, Zach’s working directory is /home/zach/grants/biblios. When CDPATH is set and the working directory is not specified in CDPATH, cd searches the working directory only after it searches the directories specified by CDPATH.
[Show full text]
Introduction to Unix Shell
Introduction to Unix Shell François Serra, David Castillo, Marc A. Marti- Renom Genome Biology Group (CNAG) Structural Genomics Group (CRG) Run Store Programs Data Communicate Interact with each other with us The Unix Shell Introduction Interact with us Rewiring Telepathy Typewriter Speech WIMP The Unix Shell Introduction user logs in The Unix Shell Introduction user logs in user types command The Unix Shell Introduction user logs in user types command computer executes command and prints output The Unix Shell Introduction user logs in user types command computer executes command and prints output user types another command The Unix Shell Introduction user logs in user types command computer executes command and prints output user types another command computer executes command and prints output The Unix Shell Introduction user logs in user types command computer executes command and prints output user types another command computer executes command and prints output ⋮ user logs off The Unix Shell Introduction user logs in user types command computer executes command and prints output user types another command computer executes command and prints output ⋮ user logs off The Unix Shell Introduction user logs in user types command computer executes command and prints output user types another command computer executes command and prints output ⋮ user logs off shell The Unix Shell Introduction user logs in user types command computer executes command and prints output user types another command computer executes command and prints output
[Show full text]
Lab Intro to Console Commands
New Lab Intro to KDE Terminal Konsole After completing this lab activity the student will be able to; Access the KDE Terminal Konsole and enter basic commands. Enter commands using a typical command line interface (CLI). Explain the use of the following commands, ls, ls –al, dir, mkdir, whoami, Explain the directory structure of a typical user. This lab activity will introduce you to one of the many command line interfaces available in Linux/UNIX operating systems and a few of the most basic commands. The command line interface you will be using for this lab activity is the console called the Konsole and is also referred to as Terminal. Note: As you notice, in the KDE system many features are written with the capital letter “K” in place of the first letter or the utility to reflect the fact it was modified for the KDE system. The original UNIX system did not use a graphical user interface GUI but rather was a command line interface (CLI) similar to the command prompt in Windows operating systems. The command line interface is referred to as a shell. Even today the command line interface (the shell) is used to issue commands on a Linux server to minimize system resources. For example, there is no need to start the GUI on the server to add a new user to an existing system. Starting the GUI will reduce the system performance because it requires RAM to run the GUI. A GUI will affect the overall performance of the server when it is supporting many users (clients).
[Show full text]