2 Prices Valid from 1/11/18. Introduction This wlll be our first catalogue revision since 2015. On the whole the prices remain the same with a few alterations on specific items and a few new additions.
We are kept busy with enquires from new and existing customers and we want to Thank you all for your Custom and continued support.
Devolopment we have been working to produce more of our fittings on new ma- chines which will improve the quality and finish but of course all of this takes time. There are some new fittings and some for the future.
Designs available. We have moulds for the RG65 Puma, 1m Toscar, 10r Tension and RA Sweet 9. Development is ongoing with the Sweet 10. At this time we have a long delay on producing any hulls due to the availability of a moulder. We can still produce Fins, Rudders and other glass mouldings.
We stock a wide range of fittings, pulley blocks, cords and wires.. We also stock Aluminium tube and carbon tube for masts and booms, and other raw materials . In fact nearly everything you will need to build a racing yacht. Our range is always being updated to improve performance, and also make the best use of new materials when they become available.
Sails are all made to order, selection of cloths available and samples can be sup- plied on request. Coloured dacron is available, at an additional cost of £1 per panel also coloured luff tape and corners at no additional cost. However coloured finger patches add £5 per suit. Special sails for the non-standard hull can be made to order, just drop us a note with the details and we will quote.
Delivery times: Fittings, (our PW range are our own made) are all sent out by First Class post and are usually sent out within a couple of days of ordering de- pending on our stock levels. Masts and boom tubes usually in stock are sent out by either parcel post up to 1.5m or by carrier, (see inside back cover for charges). Sails, delivery time on sails is a minimum of 12 weeks and can be longer, sent by first class mail in 4’’ cardboard tubes. 3 Sails conform to ISAF rules Order all 3 suits together and deduct £5. from the total plus post and packing. Sails are available in Scrim, Satin Film and traditional Dacron.
Top Suit Scrim or Satin Film £60.50 1M Working Suit Dacron £51.00 Scrim or Satin Film £54.00 Storm Suit Dacron £43.00 class Scrim £46.00 Luff Finishes Sails available with either luff cord, eyelets or hooks to suit either groovy, rings or jackline. Coloured luff tape is available on request. finger patches add £5.00 per suit Rig Kits. Complete set of fittings including round aluminum mast, booms and sails to make up a rig for through deck mounting.
Delux rigs include ball raced gooseneck, rotating headboard support & clip on spreader. Top Rig will include new light weight mast.
Top Rig. Scrim £121.00 Delux £143.00 Working Dacron £105.50 Scrim £108.50 Delux £129.00 Storm Dacron £98.00 Scrim £101.00
Rig Bags. See page 9 registration Numbers see page 8. 4 SAILS CONFORM TO ISAF RULING. Sails available in 300/500 & 325/475 Ratio Also 3 different SWING RIG TYPES Mclass Luff Height Plain Panelled Mylar Scrim Light Air ...... Dacron Dacron & Composite & Super light
Dacron Top Suit 800” 2030 £73.00 £83.00 £104.00 £115.00 1900 £73.00 £83.00 £104.00 £115.00 1800 £67.50 £78.00 Working Suit 800” 1650 £64.00 £73.00 1450 £64.00 £73.00 Storm Suit 700” 1450 £51.00 £59.00 £69.50 Storm Suit 600” l250 £51.00 £59.00 £69.50 Storm Suit 450” 950 £46.00 £55.50 £65.00
LUFF FINISHES. These sails are available with either Luff Cord, Eyelets or Hooks to suit either groovy, rings or jackline. Coloured luff tape or cloth is available on request. Light air sails are normally made of light scrim or film. Super light sails are made of 36 or 23 Micron clear film, with necessary strengthening.
For Registration numbers see Page 8.. 5
M Shroudless rigs
above above costs.
as as swing rig. Add £2. to
Use Use same mounting hole
Off Off Set Rigs.
Scrim Scrim sails £141.50
Dacron Dacron sails £133.00
Storm Storm 500” Luff 41.3”
Scrim Scrim sails £151.00
Dacron Dacron sails £142.00
Storm Storm 600” Luff 49”
Scrim Scrim sails £151.00
Dacron Dacron sails £142.00
Storm. Storm. 700” Luff 57”
Scrim Scrim sails £155.50
Dacron Dacron sails £146.00
Dumpy Dumpy Working. 800” Luff 57”
Scrim Scrim sails £155.50
Dacron Dacron sails £146.00
Working Working Rig. 800” Luff 65”
of of sails required. Centring plug should be ordered separately.
panelled panelled scrim. Please specify tube size rig is to fit and ratio
& & all necessary fittings. Sails can be panelled dacron or Each Each rig is supplied with carbon fibre mast & alloy booms
Bags to protect /transport your
swing & shroudless rigs.
See page 9
M M swing rigs
For For Registration numbers see Page 8.
place place of c/f for economy rigs. Prices on request.
Aluminium Aluminium masts are available in
& & bearings.
with with necessary fittings
All All rigs are supplied
With With 2 piece c/f mast.
Scrim Scrim sails £
Panelled Panelled Dacron £
600sq” 600sq”
Storm Storm Rig. 49” Luff
With With 2 piece c/f mast
Scrim Scrim sails £
Panelled Panelled dacron £
Storm Storm Rig. 57” Luff 700sq”
With With 2 piece c/f mast
Scrim Scrim sails £
Panelled Panelled Dacron Sails £
Working Working Rig. 67” Luff.
Approx. Approx. weight of rig 356 grms.
with with 2 piece c/f mast £
Intermediate Intermediate Rig. 73” Luff
weight weight app. 260 grms. £
gadget gadget & c/f section mast
light light wt sails, bent alum. Booms, jib
Special Special light wt Rig with composite
Total Total weight approx. 350 grms.
Scrim Scrim sails, satin film Top Top Rig. 83” Luff £ c/f section mast. 6
For Registration Numbers see page 8
For rig bags see page 9
numbers numbers see Page 8.
For For Registrations
Panelled Panelled scrim £66.00
Fourth Fourth Suit
Plain Plain Dacron £61.00
Panelled Panelled scrim £77.00
Panelled Panelled Dacron £71.50
Third Third Suit up to 60”
Plain Plain Dacron £67.00
Panelled Panelled scrim £81.00
Panelled Panelled Dacron £77.00
Second Second Suit up to 72”
Panelled Panelled scrim or dacron £93.00
Top Top Suit
Satin Satin or Light Scrim 103.00
Light Light Weight Top Suit
within within the fore triangle.
shape shape to maximise the area possible
particular particular attention to the jib size and
sail sail area is measured it is worthwhile paying Because Because of the rules that govern the class in the way
10R class A class
on on request.
luff luff tape or ccloth available
eyelets eyelets or hooks. Coloured
Sails Sails available in luff cord
Luff Luff Finishes
Scrim Scrim £75.00
Panelled Panelled Dacron £65.00
Third Third Suit up to 1300cm
Scrim Scrim £81.00
Panelled Panelled Dacron £70.00
Second Second Suit up to 1700cm
Satin. Satin. £95.00
in in scrim or
Panelled Panelled Top Suit
or or satin £120.00.
Light Light Air Top Suit in scrim
to to the cost of each suit.
distortion. distortion. This battening would add £10.00
for for better control of sail shape and less
3rd 3rd suits to fully batten thereby providing
battening battening and it is possible on 2nd and
conditions. conditions. There is no restriction on
and and what you want to achieve in certain
can can vary enormously, depending on the boat Because Because of the 10r class rules the sail sizes and shapes 7
Light Weight Top Suit Scrim £89.50
Top Suit Panelled Dacron £75.00
Panelled scrim £80.00
Second Suit up to 58”
Panelled Dacron £72.00
Panelled scrim £77.00
Third suit ,up to 48”
Panelled Dacron £67.00
Panelled scrim £71.00
Plain Dacron £59.00
36” class 6m class
Triple Triple pocket £27.00.
Double Double pocket £25.00.
Rigs Rigs Bags. Single pocket £23.00.
iwith iwith necessary strengthening.
Super Super light sails are made of 36 micron or 23 micron film
Light Light Air Sails are normally made of satin film or light scrim.
request.
or or hooks. Coloured luff tape or cloth is available on
These These sails are available with either luff cord, eyelets
Luff Luff Finishes.
40” 40” “ 28.00 45.00 49.50
44” 44” Storm 28.00 45.00 49.50
50” 50” “ 51.00 56.00
53” 53” “ 51.00 56.00
55” 55” Working 51.00 56.00
59” 59” “ “ 55.00 58.50 75.00
63” 63” “ “ 55.00 61.50 75.00
65” 65” Top Suit 57.00 61.50 75.00
...... Dacron
...... Composite
...... Dacron Dacron Scrim & Super Light
Luff Luff Height. Plain. Panelled. Panelled Light Air &
size, size, for conventional rig, una rig or swing rig
enormously. enormously. Sails can be made to your own design and
for for the 36r, the sail shape and area can vary Because Because of the lack of restriction on the sail plan
Top suit Dacron or Scrim £68.50 Scrim or Dacron suit Top Smaraag
All numbers are black self-adhesive.
Class Insignia for 36, M, 10r, 6m & A 30p each 1 Metre class insignia 30p each Mini 40 insignia 50p each J Insignia 50p each Boat no. GBR ---- 2.20
ISAF Class sail Numbers, 105mm high, Silver backed numbers (reduces visibility of numbers from opposite side) 45p each
National letters GBR in a strip pre-spaced also others on request 70p each
Complete set supplied & fitted (national letters, 2 digit nos. & insignia) £9.00
9 Sail Making Materials White Dacron 2.7 oz 36” wide £16.50 per mtr run White Dacron 140 gram wt 36” wide £ 14.50 per mtr run 160gram, wt 36” wide £ 14.50 per mtr run 180gram, wt 36” wide £ 14.50 per mtr run Coloured Dacrons 3.8 oz wt 36” wide £ 14.50 per mtr run Cream Dacron 5.5 oz, 36” wide £ 18.50 per mtr run Laminate (scrim) T70 48” wide approx 1.3oz £ 12.00 per mtr run Laminate (scrim) T40 48” wide 0.9 oz £ 12.50 per mtr run Laminate (scrim) T54 48” wide 1.1 oz £ 15.50 per mtr run Laminate (scrim) T90 48” wide £ 12.00 per mtr run Laminate scrim PM02/ m190 54”wide l.9oz £ 24.00 per mtr run Laminate scrim PG 45/ 54” wide 3.5oz £ 18.00 per mtr run
Satin Film Minimum quantity 5 metre off the Roll. Satin Film 23 micron 513 mm wide £ 2.20 per mtr run Satin Film 36 micron 650 mm wide £ 2.75 per mtre run Satin Film 50 micron 530 mm wide £ 2.20 per mtr run Satin Film 75 micron 750 mm wide £ 3.50 per mtr run
DECK PATCH Polyester Self Adhesive Deck Patch material 2.1 oz weight. £19.00 per m run Cut from a roll 54” wide , Equiv. to £13.86 per m sq. or £ 6.93 per ½ m sq. Can be cut to Various widths off the roll, Suitable for deck patches and sail corner stiffening. colours available White, Royal Blue, Navy Blue, flo. Pink, flo. Orange, flo. Yellow, Green, Black, Yellow, Red , and Grey.
Tapes 1/2” wide self adhesive white luff tape per metre £ 0.42 1/2“ wide self adhesive white luff tape 50 yard reel 9.50 1” wide self adhesive luff tape various colours per m 0.70 1” wide self-adhesive cloth tape, Sticks to Wet Surfaces Ideal for repairs to decking or hull, 10 metre reel 4.35 1/4” wide clear mylar tape for leaches 50 metre reel 4.65 1/4” wide seamstick (for seams) 50m reel 7.95 1/4” wide self adhesive white luff tape 50 yd reel 5.50 9mm wide seamstick 50 m reel 11.90 9mm wide mylar tape 50 m reel 5.50 Bolt rope in tape ready to sew on, per metre 4.00 Jib Luff Tape (spinnaker cloth cut to lengths) per metre 1.00 Mast & booms Parallel c/f tubes (available in up to 2m lengths). 16mm Tube 1.0mm wall weight 80gms. 1m long £25.00 14mm Tube, 1.0mm wall, weight 60grms. 1m long £23.00 12mm Tube, 1.0mm wall, weight 49gtms. 1m long £21.00 10mm Tube, 1.0mm wall, weight 38grms. 1m long £15.00 8 mm Tube, 1.0mm wall, weight 34grms. 1m long £14.00 6 mm Tube, 1.0.mm wall, 1 metre long £ 7.00
Booms Carbon Fibre Rectangular Bent Boom tube suit “A” class £ 40.00 Carbon Fibre Rectangular Straight Boom tube suit “A” class £ 38.00
Keel Tube for ‘A’ Boats 15mm o/d 2mm wall, 400mm long £ 17.00 Keel Socket Tube, takes keel tube, 8” long £ 5.50
Carbon Fibre Rods. 1.5mm Rod per metre £ 3.25 3.0mm Rod per metre £ 4.10 4.0mm Rod per metre £ 4.85 6.0mm Rod per metre £ 6.40
Aluminium Mast and Booms Round.
3/4“ dia Mill finish 20g (drawn tube) per metre £ 16.00 5/8” dia. Mill finish 20g. (drawn tube) per metre £ 16.00 7/16” dia. Black or Silver anodised 20g. (drawn tube) per 2 metre lgth £ 14.00 11 mm dia Black or silver anodised 0.6 mm wall (7075) per 2 metre lgth £ 16.00 1/2“ dia Black or Silver anodised 22g (drawn tube) per 2 metre lgth £ 14.00 10mmdia Black or Silver anodised 22g (extruded tube) per metre £ 5.50 10mm main boom kit, black or silver anodised tube (for 1OM) £ 5.90 10mm jib boom kit, black or silver anodised tube (for 1OM) £ 12.00 5/16” 22g black anodised aluminium tube 16“ long (for1OM) £ 2.75 5/16” 22g jib boom kit, black anodised tube (for 1OM) £ 12.00 16mm areofoil main boom tube 16“ long (for 1OM) £ 4.75 16mm aerofoil main boom kit (for 1OM) £ 11.50 16mm aerofoil jib boom kit (for 1OM) £ 15.50 3/8“ Super Light aluminium tube for 1m jib boom 16” long, £ 3.50 Superlight boom with all the jib boom fittings £ 12.95
Aluminium Groovy. 14.5mm Round Groovy Silver anodised 2.5 metres £ 49.50 12.7mm “ “ “ “ 2.0 metres £ 32.75 11.1mm “ “ “ “ 1.8 metres £ 28.75 11 One Metre Design Toscar
Kit of parts to build up to deck level inc All mouldings , lead ballast and fittings pack £ POA A ready built version is £ POA
No Rigs & no Radio included Boats 12
Puma Rg65 class yacht 650mm long
Hulls in various colours £44.00 Fin blank £10.00 Lead Ballast £18.00 More details on separate sheet on request 13
Graupner Hott Pro Combo TX & RX £170.00
Long receiver ariel £4.50 Graupner Hott receiver GR 12L £ 35.00
Heavy duty tx battery 3000ma £23.00 Hulls 14 Tension Ten Rater Own Design, moulded for us locally. Hull supplied with plan. Available in Glass/ Carbon! £ POA Overall length 1560mm” LWL 1290” Weight 5.5 - 5.8 kgs Kit of parts to build up hull with C/F Fin & Rudder, moulded deck and fittings. ( no rig /radio) £POA
SWEET A class Mk 9 Moulded for us locally. Hull sup- plied with plan. Available in Glass/ Carbon In various colours. Hull is a modifica- tion of the Sweet Smile Designed by R. Stollery and is a competitive boat in all conditions. Cost £ POA
Weight 331bs. Overall length 76”, LWL 49”, Sail area 1490sq” approx kit of Parts to Build up Hull with Fin, Rudder, glass foam Deck and fittings (no rig/radio) £ POA
Fully Built competition boat with 3 suit of sails (no radio ) From £POA 15 Mouldings Fins Carbon Fibre fin for 1 metre £67.00 Carbon Fibre fin for M , R10r 760mmlong £93.50 Aluminium fin blank for Rg65 , 300mm long £10.00
Moulded Fin Shell for ‘A’boat Sweet Design. Glass fibre, filled solid with Fin tube fitted.) £80.00 Rudders Carbon Fibre rudder suit 1m, Marblehead & Rior £ 29.00 Moulded Rudder for ‘A’ boat Sweet design for 3/16” shaft. £ 40.00
Mouldings Glass Fibre Sheet ideal for decking, (various colours) per sq ft £ 10.00 Carbon Fibre Sheet ideal for decking, keel boxes etc. Can be cut with scissors 300mm x 210mm x 1mm 18.00 Moulded glass finbox For 1M’s .M’s & 10’s £ 23.00 moulded fin box with attached mast tube for 1m’s £ 25.00 Moulded glass channel for jib track under deck 100mm 4.00
Moulded C/F mast tube for “M” 13.00 Moulded C/F Tapered mast tube for “RA” 13.00 Moulded White Plastic Pot Recess (pot not included) pw 39 £ 4.50 Carbon fibre moulded rakable mast tubes with plastic top insert for M’s & lOr’s conventional & swing rig, allows mast position to be adjusted by raking. £ 21.00 Lead Weights Rg65 one piece 485grams ,180mm long with slot £18.00 1 metre One piece approx. 2.35kg with slot, length 285mm £ 27.00 Marblehead, One piece approx. 3.6 kg with slot, length 285mm £ 30.50 Rior, One piece, weights can be varied to suit, length 305mm £ 30.50 A Class to suit Sweet Design 12kg approx. £80.00 6m approx. 9.4 kg no slot £80.00
Bow Bumpers Moulded in silicone rubber in white , grey, or black Moulds kept for Karneol, Peken, Patriot, Oscar, Berlioz, Ragtime, Fifi 2, Stella, Argo Starkers, Krcar, Composite, Tension, Sweet 6 and 9 £ 6.50 Sweet bumper A class up to mark 5 £ 9.00 Mouldings 16 pw39 17
PW 49 £ 4.10
£ 8.20
PW 50 mast raker gives thumb Wheel control of mast rake Only allows of 15mm of movement 7/16” to 15mm dia. Mast.
Lead rig ballast plugs PW 56 Detachable hounds fitting To fit inside 7/16“or ½ Comprises a slide (& mast Tube.wt 70g per 70mm Insert) that Fixes to the £ 1.50 Mast & a track insert To attach shrouds / jib £ 7.60
A class Fin is supplied With c/f keel tube fitted & Solid cored Rig Bags, 18 19 Radio Control Accessories Winches New PJ winch 1M details on page 20 £ 95.00 New PJ winch M,10,6m,A details on page 20 £ 120.00 Hitec HS 785 drum winch ( use in the Laser class) £ 26.50 Hitec HS 765 lever arm winch £ 26.50 PlasticWinch Drum to fit Graupner regatta winch 32mm £ 6.50 Plastic Winch Drum 50mm and 67mm £9.00 Set of Gears for Regatta 5173 £7.00 Set of Gears for Regatta 5172 £17.50
HS 785 HS 765 HS 646
SERVOS Hitec Hs 325 b/r servo 3.7 kg £ 13.00 Hitec HS 646/WP (water proof / BLUE) HS 325 standard servo 9.6 kg £ 38.00 Hitec HS 5086 (waterproof ) Mini servo . £ 40.00
SAVOX 0230 W/P SAVOX £29.00 0250W/P MINI £28/00 PLUGS AND SWITCHES Small Toggle Switch with plug and socket with waterproof cover 9.00 Small Toggle Switch with waterproof cover (single pole) 5.25 (double pole) 5.60 Toggle Cover Only 2.90 Futaba Plug 2.50 Futaba socket 2.50 Hitec plug 2.50 Hitec socket 2.50 Molex Plug and Socket for battery to winch. 2.60 Futaba Red Plug 2.00
Heat Shrink 3.2mm shrink to 1mmTube 1.00 Spektrum Voltage Drop Protector 5.95 2.4 Aerial long ext. 450mm 4.50 Antenna tube 1.15 PJ Winches 20
PJS 20
Size 41 x 20 x 37 Weight without drum 66 Grams Drum weight 18 Grams Ideal winch for R36 And 1m Drum size dia 67mm Simple to set just plug in and Circumference 190 mm Use the transmitter atv’s to Max of 2 turns . Adjust the travel , up to 2 turns Voltage 6v - 7.2vmax Economic on batteries.. Speed at 6 volts 0.9sec per turn Speed at 7.2 volts 0.6 sec per turn Cost £ 95.00 Torque 20kg at 1 cm
PJS 36
Size 41 x 20 x 46 Weight without drum 79 Grams Drum weight 18 Grams winch for M’s 10r’s 6m & A class Drum size dia 67mm Simple to set just plug in and Circumference 190 mm Use the transmitter atv’s to Max of 3 turns . Adjust the travel , up to 3 turns Voltage 6v - 7.2vmax Economic on batteries. . Speed at 6 volts 0.8sec per turn Cost £120.00 Speed at 7.2 volts 0.6 sec per turn Torque 36kg at 1 cm sept/2014 Batteries &Chargers BATTERIES Physical Size A.A. Cells 6 cell Battery pack 2600 m.ainp. Nickel Metal Hydride £26.00 5 cell Battery pack 2600 m.amp. Nickel Metal Hydride £22.00 single cell 2600 m.amp £ 3.75
Multi Lader 7E Charger leads A 7 output mains £ 4.20 per set Charger With 3 outputs In Delta peak, the others Are 2X 250ma & 2 x 120ma up to 10 cells , Nimh £ 31.50 Deck Fittings pw1e PW 1 Eyebolt 1/2” 3mm 0.90 pw1 PW lh Eyebolt 1” 3mm 0.90 PW1c Eyebolt 1” 4ba 0.90 pw1c PW 1d Eyebolt 20mm 2.5mm 0.90 PW le Eyebolt 1” 4ba aluminium black pw1b anodised, 1/2 weight of chromed partner. 1.25 PW lf Eyebolt 1/4” 4ba & nut for jib slide 0.90 pw1f PW 1g Eyebolt 2” 2ba 1.50 pw3 PW 2 Deck Plate chromed brass 1.95 PW 3 Keel Bolt 3mm brass insert with 2.65 tufnol block and s/s bolt. pw3 b PW 3b Ballast Bolt, brass sleeve nut for securing a detachable lead to a fin. 2.20 pw4 PW 4 Jib Rack Chromed Brass. 2.95 pw2 PW 5 Jib Slide 3” black anodised. Includes 1 Insert PW 5e. Normally supplied with ThumbWheel. 5.00 pw5 b PW 5b Jib Slide 5” black anodised. Includes 1 Insert PW 5e. Normally pw5f supplied with Thumb Wheel. 5.00 PW 5c Jib/Mast Slide 16” black anodised, pw5 Order Inserts separately. 4.40 PW 5d Insert to accept Mast Mounting plug in slide (plug is part PW24c) 2.20 Pw6b PW 5e Insert for Jib/Mast Slide, eye glues 3.25 pw5d across or in line. Supplied with thumbwheel PW 5f As Above, Supplied with Screw & 2.65 Washer to prevent line from snagging wheel pw5e PW 6 Mast Ram fits Jib/Mast Slide 4ba 2.40 pw6 Pw 6b Mast ram curved head to fit 3.15 mast, with large thumbwheel 4ba pw 9 PW 6c As PW 6b with plug for Bulkhead 3.65 PW 9 Mast Jack 5/8”, 1/2” Black alum. 3.45 pw12 PW 11 Rudder Arm 1/8” plated brass 4.00 PW llb Rudder Arm 5/32” single 4.00 PW l1c Rudder Arm 3/16” single 4.00 pw11 b PW l1d Rudder Arm 1/8” double 4.20 PW 11e Rudder Arm 5/32 double 4.20 PW 11f Rudder Arm 3/16 double 4.20 PW12 Single arm black plastic with pw11e metal insert 2mm, 3mm, 4mm 1.80 PW 12b Detachable rudder fitting/arm, 15.75 this is attached loosely to the rudder tube and allows the rudder to be removed for transport, no access to hull is necessary. pw12 b Special Shaft is supplied for 5/32” or 3/16”. Shaft only 3.75 23 Deck Fittings pw 12c
PW 12c Rudder shaft 6” s/s rod 1/8” 0..81 Rudder shaft 6” s/s rod 5/32” 0. 85 Rudder shaft 6” s/s rod 3/16” 1. 05 PW 12d Rudder tube 4” brass 1/8” 1.00 pw 12 d Rudder tube 4” brass 5/32” 1.15 pw12 e Rudder tube 4” brass 3/16” 1.15 PW 12e 6” of 4mm Carbon Fibre rudder shaft and 3” of 8mm Carbon Fibre tube with PTFE bearings. 6.20 pw12 f PW 12f 6” of 6mm Carbon Fibre ruddershaft and 3.5” of 8mm Carbon Fibre tube 3.25 pw12 g PW 12g 6” of 6mm Carbon Fibre rudder shaft and 3.5” of 10mm CarbonFibre tube with PTFE bearings 6.95 pw19 b PW 19 Sheeting Tube in plate 3.30 pw19 PW 19b Sheeting Reverser in plate 3.30 PW 20 Sheeting Tube (must be glued in deck) 0.85 pw20 PW 25 Mast Step alum. slotted 2.75 PW 25b Mast Step alum. 5mm holes 2.75 pw25b PW 26 Mast slot Plate alum. (to suit 7/16”,l/2”, 5/8” . 2.85 PW 39 Radio Pot ( 67mm dia ) 1.20 pw 25 PW 39c Radio Pot (67mm diax 50mm) 1.00 PW 44B Concealed ball raced Jib Swivel pw26 fitting includes 3” slide and fits 10mm boom. For use on 6m’s and “A” where jib height is important. Alloy joining tube (which is now angled ) for boom with ball races fitted inside it attaches to a track see mouldings insert included. 16.30 for pot recess PW 44d BallRaced jib boom page 13 Swivel for 8mm, 10mm 10.00 pw 39 PW 45 6” Swing Rig Tube 3/4”odx20sw unanodised aluminium. 1.95 PW 45b 6” Oval Tube (for 1 metres) 1/2” by 3/4” mt. unanodised 2.40 PW 45c 10” Oval Tube (NJ Class) 4.00 PW 48 Sheeting Nipples 8mm, 5/16”, 3/8”, pw 48 10mm, 7/16” tubes o/d 1.10 PW 48 Sheeting nipple Micromagic 1.10 pw45 pw46 pw 45b
pw 44B PW44D Deck Fittings PW 49 Main Sheet Post ( telescopic) Adjustable height, aluminium tubes 4.10 PW 50 PW 49b As PW 49 but supplied with Glass Outer tube 6.00 Glass Outer tube only 3.00 PW 50 Mast Rake Control (thumb wheel adjustment) for 7/16”, 1/2”, 14mm masts 8.20 PW 53 Radial Jib Fitting For use on ‘A’, pw53 6m’s and lOr’s. Supplied with ball races can be mounted on twin slides or just using a three point fixing. With adjustable luff angle, luff attaches to shaft. To fit 10mm or rectangular pw53c c/f boom. (Deck must be very rigid) 72.50 PW 53b Attachment for Counter Balance to Radial jib fitting. 4.20 PW 53c Mobile Slides to take Radial Jib fitting. Supplied with 2 Deck Rails and mounts for compression strut 25.20 pw60 PW 60 Ball Joint 3mm each 1.75 PW 60b 0.3m Push rod tube with 2 ball joints 4.55 PW 61 Silicone Bungs,small end 3mm 0.35 PW 62 Turned Acetal Fairlead Ring 1.50 PW 78 s/s Tension Spring (hand wound) 2.00 PW 79 Through deck Fairlead 3.65 PW 80 Through deck Fairlead to take Pulley below deck 13.65 pw 53b PW 81 Through deck fairlead ,to take Below deck, pulley not included 7.35 PW 200 Shackles 5mm stainless steel 1.10
pw200 PW78
PW 49 pw 62
PW81 PW79 PW80 pw61 25 Deck Fittings
PW 202 Ball Raced Through Deck Pulley Block Water Resistant. 9.00 PW 203 Ball Raced Single Pulley Block For deck mounting 6.50 PW 202 PW 204 Ball Raced Single Pulley Block With shackle 6.50 PW 205 Ball Raced Servo Arm Pulley 6.50 pw203 PW 207 Ball raced short pulley block With shackle 6.50 PW 223 ball raced double block For deck mounting. 9.50 PW 224 Ball raced double block With shackle 9.50 pw 204 PW 227 Ball raced short double block With shackle 9.50
PW224 PW207
PW223
PW 8j Detachable turnbuckle (complete ) With s/steel 3mm deck bolt Turnbuckle has 20mm adjustment And is held in place with sleeve £6.50 PW 8f Body and Eyebolt £4.50 PW 8g Deck eye only ( 15mm of thread ) £2.00 Rig Fittings 26
PW 8c Turn Buckle 2.5mm, 3mm or 4ba chromed pw8c brass wire type. (3mm suits 1m or “M”, 4ba for 10r and RA class). 3.05
PW 8d Turn Buckle 4ba alloy black anod. wire pw8d type, less than 1/2 weight of chromed partner 3.85
PW8e PW 8e Turn Buckle 2ba 2“ long chromed 3.90 For large boats of 16kg or more. pw10b PW 9 Mast Jack 5/8”,1/2”, 7/16” black alum. 3.50
PW 10 3 Hole Bowsies Black and Yellow 0.09 PW lOb White round Bowsie, drill your pw9 own holes, size 15mm x 5mm 0.05
PW 13b Backstay Arm (bent) black pw10 anod aluminium available in different lengths 2.30
PW 13c Bent Backstay Arm with plastic pw13c plug / to fit 10mm, 7/16” or 1/2” tube. Allows Backstay to be rotated or removed to allow rig to lie flat to fit in sail bag or to allow sails with luff rings or luff pocket to be slid over top of mast. Black anodised aluminium. arm kept in 4 lengths Wt. 1/3 oz. 4.15 pw13d
PW 13d Bent Backstay Arm with plastic mast plug & injection moulded headboard rotating headboard support s/s ballraces for use with rings and luff pocket sails. Improves off wind sail shape. Black anodised aluminium specify mast size pw13f & backstay length 16.30 PTFE Version 8.00
PW 13f Bent Bckstay arm with plastic plug & Insert for rotating wire headboard. 4.50
pw13d Rig Fittings PW 14c Spreader s/s tube small dia. 1m and ‘M’ 3.30 PW 14c PW14c Spreader s/s tube large dia. 3.30 PW 14d Clip on Spreader (black plastic) for 10.8mm, 7/16“, 1/2”, 12mm and 14mm tube 5.30
PW14d
pw 15
pw15e 1m
Special kicker bolt for use with sunken aft deck Rig Fittings 28 PW15f Ball Raced Gooseneck and Tension Strut for “A”, 12m and AC12. Rotates around centre ,line of mast, pw15f designed for use with luff rings or pocket sails. Improves the off-wind sail shape. Supplied with Stainless Steel Ball Races to fit 17mm dia. through deck tube. all black anodised aluminium 80.00 PW 15g Gooseneck and Compression strut Including the PW 21c 21.00 pw16 PW16 Flow Adjuster 5/16”, 3/8”, 7/16 PW16B 1/2 ” and 5/8”. Made from 16g. s/s wire. 0.78 PW 16b Flow Spring 5/16”, 3/8”, 7/16” 1/2” and 5/8”. Made from 16g. s/s wire. 0.78 PW 16C stainless steel clew attachments for Areofoil booms. 1.15 PW16C PW16D machined alluminium clew attachment Clamps in sizes for in sizes for 3/8“, 10mm PW17E 7/16”,12mm, & 14mm . Check Availability 4.00 PW16E clew slide for c/f rectangular tube Needs a slot in tube 4.10 P W17 Boom Bands with eye to fit 5/16”, 3/8”. 7/16”, 10mm, 12mm, 1/2” and 5/8” tube. Chromed brass 1.80 PW 17 Plastic Boom Bands 3/8“, 10mm, 7/16” 0.60 PW17D PW 17a Black anod. alum. boom bands 5/16, 3/8”, pw17b 10mm, 7/16”, 12mm and 1/2” 2.80 PW17b Mast rings chromed brass 0.95 PW17c Boom bands with double eyes to fit 10mm and 3/8“, 7/16”, 1/2” tube 2.50 PW17A PW17 d Mast rings Black anodised machined Aluminium with one attachment points 3.15 Two attachments points 3.15 Available in sizes for 10 ,12 mm tubes PW 17E s/s boom band for areofoil boom 1.15 PW18 Y Shaped Spreader 4.10 PW17 PW18b Y Spreader Kit as above includes Turnbuckle, n/c shroud wire and crimps 7.60 PW16D PW16E
pw18 29 Rig Fittings pw21/b PW21 Compression Strut short black anodised aluminium 4” 9.15 PW21b Compression Strut long, black pw21c anodised aluminium 6 or 9 inches 10.45 PW21c Plate with curved base to fit booms. Chromed brass 2.60 PW21d Boom Band with plate 10mm, 12mm and 14mm 3.50 PW22 Alloy Mast Joiner/Adaptor 5/8” to 1/2” mill finish 1.80 PW22b Alloy Mast Joiner/Adaptor 5/8” to 5/8”, 1/2” to 1/2”, 7/16” to 7/16” pw 22 mill finish 2.95 4” of 7/16” 20g. black anod. Tube to fit inside l/2” 22g. 0.70 PW22d Alloy Mast Adapter l/2” to 3/8” mill finish 1.80 PW23 Counter Balance Weight chromed pw 23 brass, 16, 22, and 34 gram. 16 guage wire supplied. Boom end must be ordered separately. (pw71b 8mm, 5/16”, 3/8”, 10mm, 7/16” 2.10 PW24 Mast Plug for 10mm, 7/16“, 1/2” 1.85 pw 24b PW24b Mast Plug for groovy state w hat size. 2.30 pw 24 PW24c Mast plug for track system pw5, state size 2.30 PW 24d Mast Foot for 7/16” or 1/2” 2.50 PW31 Grommetts to fit 6mm, 5/16”, 3/8”, 10mm and 1/2” (pack of 10) 1.00 PW31b ‘0’ Rings sizes as PW 31 each 0.13 PW32 Burgies (kit of parts) 4.60 PW33b Ball raced swivel tiny, about pw31 pw 31b 1/8” dia. and 3/8” long 0.85 PW34 Crimps, Pack of 10 Several sizes, (ask to suit wire size) 0.34 pw34 P W35 Swing Rig Block, black pw35 anodised to fit 14mm mast and takes 10mm, 12mm, 7/6“, l/2” alum. booms 6.95 PW35b Swing Rig Block, black anodised to fit 1/2” mast and takes 3/8” alum. booms 6.95
PW 33b . pw35b 30 Rig Fittings pw36b PW 36 swing rig bearings PTFE please state what size mast 5.15 PW36b Swing rig bearings with ball raced bottom cup 14.60 PW 44d Ball Raced Jib boom swivel 10.00 8mm and 10mm pw36 PW56 Detachable hounds fitting 7.60 PW56bChrome insert with wire ring for pw62 Detachable hounds 2.30 PW 62 PTFE Fairlead ring 1.50 pw63b PW63 Eyelets small for luff rings Packs of 50 1.5mm I/d 1.40 pw63 PW63b Eyelets large for corners Packs of 20 with washers 3.8mm I/d 1.00
Pw65 Luff rings, state what size required. S/S 26g. wire 0.32 pw65 PW68 Jib gadget for swing rigs, twin Ball raced arm pivot, specify boom size 20.00 PW71b Boom End in Black Acetal with jib luff pw71b fixing point 8mm, 5/16”, 3/8”superlight tube, 10mm, 7/16” and 1/2” 2.75 Plastic Oval Boom End to suit our tube 2.75 pw71b PW72 Snap links (black) size 4 x 24mm in length, pack of 10, or size 2 x 16mm 0.70 PW73 Thumbwheel for Sails etc rectangular boom fitting 2.5mm thread 1.05 PW74 90 degree hooks s/s pack of 5 2.00 PW74B Z hooks each 0.50 PW 75 Parrot Perch (Jib luff support) 1.80 PW76 PW 76 Angled black alum. Joiner to fit 8mm or 10mm tube. 3.50 PW 77 Hook Strap s/s, supplied with 2 x 2g s/s self tappers. 0.95 PW 77
pw68 pw74 pw 74B
pw72
pw73 31 Cord and Wire Dyneema Sheeting cord 140lbs / metre £0.32 per 180 yd reel £30.00 Dyneema Sheeting cord 100lbs / metre £0.27, per 180 yd reel £28.00 Dynemma “ “ 70lbs / metre £0.24, Dyneema “ “ 50lbs / metre £0.24 per 180 yd reel £22.00 Dyneema “ “ 30lbs / metre £0.22 per 180 yd reel £20.00
Greenspot Sheeting Cord Dacron 130lb / metre £0.24 “ ” “ 80lb / metre £0.22 “ ” “ 50lb / metre £0.20 “ ” “ 30lb / metre £0.18 Black “ “ Dacron 30lb / metre £0.18 Black “ “ Dacron 50lb / metre £0.20
S/S stranded rigging wire nylon covered 150lb per metre £ 0.44 S/S “ “ “ “ “ 100lb per metre £ 0.44 S/S “ “ “ “ “ 80lb. per metre £ 0.44 S/S “ “ “ “ “ 50lb per metre £ 0.37 S/S “ “ “ 80lb, 100lb, 150lb 7.5m reel £ 3.25 S/S “ “ “ “20lb, 30lb, 50lb 7.5m reel £ 2.50
S/S mono core wire 16 g. per m £ 1.10 S/S 20g per m £ 0.89 S/S “ “ “ 18 g. per m £ 1.00 S/S 22g per m £ 0.79 S/S “ “ “ 26 g. per m £ 0.58 S/S 24g per m £ 0.68 2mm s/s wire £2.00 per metre . Boat Building Materials
Carbon Cloth 204 gram per sq. mtr 39” wide per metre run £ 30.00 Woven Glass cloth plain weave 324 gram 36“ wide per metre run £6.80 Woven Glass cloth plain weave 200 gram 36” wide per metre run £5.80 Woven Glass cloth plain weave 80 gram 36” wide per metre run £4.80 Carbon / Glass Hybid 150 gram 36” wide £13.00 per metre run
Wood 1.5mm 2mm/ 3mm Ply in sheets 4ft x 1ft, is stocked. Per sheet £8.00. 2mm x 8 s/s counterrsunk 0.08 Self Tappers Nuts & Bolts 2mm x 8 s/s panhead 0.08 2 g x 1/4” s/s pan head 0.10 2mm x 12 s/s panhead 0.09 2 g x 3/8“” s/s pan head 0.10 2mm x 19 s/s countersunk 0.10 2g x 1/2“ s/s pan head 0.11 2mm x 20 s/s cheesehead 0.10 2g x 1/4” s/s countersunk 0.10 2mm s/s nuts 0.08 2 g x 3/8” s/s countersunk 0.10 2.5mm s/s nuts 0.08 2 g x 1/2” s/s countersunk 0.11 3mm x 6 s/s panhead pozzi 0.10 4 g x l/4” s/s pan head 0.10 3mm x 6 s/s socket screw 0.19 4 g x 3/8” s/s pan head 0.10 3mm x 15 s/s panhead 0.19 4 g x 1/2” s/s pan head 0.11 3mm x 20 s/s panhead 0.19 4 g x 3/4” s/s pan head 0.12 3mm x 30 s/s panhead slotted 0.23 4 g x 1” s/s pan head 0.13 3mm x 40 s/s panhead slotted 0.25 3mm s/s nuts 0.08 Bolts, Nuts & Washers 3mm Nylocks 0.10 6ba x 1/4” s/s cheesehead 0.22 4mm s/s nuts 0.09 6ba x 1/2” s/s cheesehead 0.17 5mm s/s nuts 0.10 6ba s/s nuts 0.10 4mm x 60 s/s panhead 0.26 4ba x 3/8” s/s cheesehead 0.15 6mm s/s Bolt with Washer 0.53 4ba x 1/2“ s/s ” 0.17 WASHERS s/s 2mm, 2.5mm, 3mm, 4ba x 3/4“ s/s cheesehead 0.19 4mm and 5mm 0.03 4ba x s/s nuts 0.13 Pop Rivets c/s 2.3mm x 8mm 0.05 Split Pin s/s 1.6mm x 3 0 mm 0.05
Prices subject to change depending upon avalability in the . s/s 2.2mm x33mm 0.05 32 fastening industry. many items above are non preferred Accessories 33
Transmitter cover (trans-mitt) nylon cover with fleece lining, clear panel on front & zip along bottom. Red, Royal Blue or Navy Blue, Red Wine Large eyelet available for 2.4 gig aerial. Also eyelet can be fitted in window for neck strap. £36.00 Strop £1.00 Neck Straps £ 6.00 Neck Strap Balancer £ 6.00 (allows you to move the balance point of the transmitter in line with the attachment point for a neck strap.
Crimping Pliers ..£ 6.00
Lipo Safety Bags For Storage and charging of lipo Batteries, Small £5.50 Large £6.50 Paint brushes (cheap). Ideal for resining use once & throw away, l/2”, 3/4”, l” 30p. Books
Bookazine. Radio Controlled Racing Sail Boats By Chris Jackson £ 5.99
“BOTTLE Boat” parts Swing rig block £ 4.00
Pintle fitting £ 2.50
Crazy Tube (RM) foreyard rig sheeting block £4.00