Media Converters

Cost Effective Fiber Integration Solutions for Evolving Networks

Fiber Integration Technology that Leverages Existing Network Infrastructure for Future Growth

Transition Networks’ full line of feature-rich media converters transparently connect one type of media, or cabling, to another – typically copper to fiber. By bridging the gap between legacy copper infrastructures and fiber growth, our media converters provide an economical path towards extending the distance of an existing network, extending the life of non-fiberb ased equipment, or extending the distance between two like devices.

Available in stand-alone, modular chassis-based, or PCI powered configurations, Transition Networks‘ media converters offer copper to fiber and fiber to fiber media conversion in the following supported protocols: Ethernet, Fast Ethernet, Gigabit Ethernet, Power-over-Ethernet, 100/100, 10/100/1000, ATM, T1/E1, DS3/E3, POTS, RS232, RS485 and more. With industry leading advanced features such as Auto-Negotiation, Auto-MDI/MDIX, Link Pass Through, Far End Fault, and Automatic Link Restoration – Transition Networks’ media converters make an invisible component in the physical layer “visible” to network managers; allowing more efficient troubleshooting and less on-site maintenance. These cost and time saving features have made Transition Networks’ media converters the #1 choice among industry IT professionals.

1 High Density Media Conversion Solutions for Deployments in the Network Core

• Enterprise Campus Enviroments • Government and Municipal Agencies • Healthcare/Medical Facilities • Banking and Financial Institutions • Higher Education Campuses

CORPORATE HEADQUARTERS

FLOOR 3 REMOTE BUILDING 1

FLOOR 2

FLOOR 1 REMOTE BUILDING 2

Copper Switch

Why Conversion? Product Features

• Extend a networks reach with a fiber infrastructure • Scalable solution for easy network expansion • Supports various network communication protocols • Protect investments in current copper-based within the same chassis network devices • Hot-swappable slide-in modules for ease of installation and maintenance • Conversion provides affordable connections • Efficiently monitor chassis through management module between RJ-45 ports and fiber optic cabling - Accessible through a web-browser, CLI, SNMP, or Focal Point • Future proof a network with fiber and protect data from noise and interference • Advanced security allows for controlled access - SSH, SSL, Access Control List, Management VLAN, SNMP v1, v2C, & v3

2 ION219 Chassis 19-Slot Chassis for ION Slide-in Modules

Ordering Information The ION219-x is an all new intelligent, high-density, ION219-A multi-protocol system supporting a variety of network 19-Slot Chassis for the ION Platform interface devices. Designed for both carrier class and AC Powered enterprise network applications where multiple points of fiber integration and secure network management of the ION219-D 19-Slot Chassis for the ION Platform fiber interface devices is essential. An end-to-end fiber DC Powered integration solution can be achieve by pairing the modules in a high density ION chassis with the modules in another Optional Accessories ION chassis, or a Transition Networks’ stand-alone device. To take full advantage of all the features and functions available IONPS-A with the ION Chassis, an ION Management Module is required. The ION Management Module connects to the chassis ION Power Supply Module backplane and communicates with the individual cards in the ION Chassis. Each slide-in-module for the ION Chassis has Universal Input 100 - 240 VAC specific features and functions that are controlled via the ION Management Module. A network administrator can config- IONPS-D ure, monitor and troubleshoot ION slide-in-modules remotely via the ION Management Module. -48 VDC Power Supply Module IONMM Transition Networks understands that no network is managed in the same manner and that different security levels and ION Mangement Module management interfaces are often required depending on the deployment of the ION Chassis. With that in mind, the ION IONFP Platform has been designed to be one of the most versatile and secure fiber integration systems available today. ION Face Plate (required for all empty slots) WMBC-2RU Wall mount brackets for 2RU Chassis Access Method Specifications IONRE-23 ION Rack Mount Ears Slots ION219-x (19) Slots in front for ION slide-in-modules • Web-browser: Access the ION (2) Slots in rear for power supply modules Management Module using a Unit LEDs ION219-x Power On LED for each installed standard web browser such as power supply module Security Features Internet Explorer or Mozilla Firefox. Dimensions ION219-x Width: 17.0” [430 mm] Depth: 15.8” [401 mm] When the optional management module • Command Line Interface (CLI): CLI Height: 3.5” [89 mm] is used, the following security features access can be done via telnet Power ION219-x Two open bays for ION power supply modules are available, allowing you to control remotely or via the local console supporting Universal Input 100 – 240 VAC, or access to the ION Chassis via the ION -48VDC rated at 200 watts max output port on the ION Management Note: Powersupply module supplies +12 VDC Management Module. Ensuring that Module. maximum to each slot in the chassis. only authorized personnel are able to Only one power supply module is required to view and change the settings to the power the chassis and the installed modules, the • SNMP: Since the ION platform is optional second power supply module provides slide-in-modules. based on public MIBs you can reduncancy for instant fail-over. • Management VLAN easily manage the ION with a Environment Operating : 0°C to 50°C • SSL standard network management Humidity : 5% to 95% (non-condensing) • SSH Altitude : 0 – 10,000 ft. system (NMS) such as SNMPc, • 802.1x HPOV or any other standard SNMP Shipping Weight ION219-x 19 lbs. [8.6 kg] • SNMPv1 & V2c, +V3 platform. Compliance UL listed, EN55022, EN55024, CE Mark, (v3 via future firmware upgrade) FCC Class A, CISPR Class A Warranty Lifetime • Focal Point: Transition Networks offers a free SNMP graphical user interface (GUI) software (Focal Point) for the management Management Features purposes. Focal Point offers full read and read/write capabilities in a user • Variety of management access friendly GUI. methods including; telnet, • 2 10/100 Ethernet interfaces web, SNMP • USB console port • Single slot design allows for more slide-in-modules to be inserted in • TFTP upgrade/backup of the ION Chassis slide-in-modules • Management VLAN • Import/Export configuration files in human readable/editable format • Based on Public MIBs • Multiple community strings

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 3 ION™ Chassis 1-Slot and 2-Slot Chassis for ION™ Modules

The ION™ Platform consists of a 19-slot, a 2-slot, and a 1-slot chassis, along with a variety of slide-in media converter modules. The high density 19- Ordering Information slot chassis is designed for core network and datacenter applications where there is a need for high volume and centralized points of media conversion. ION001-A 1-Slot Chassis for the ION™ Platform While at the network edge, the 1-slot and 2-slot ION™ chassis’ are designed AC Powered to allow a single card, two cards, or one double-wide card to be deployed as a stand-alone media converter. ION002-AD ION001-A 2-Slot Chassis for the ION™ Platform with AC or DC power options

Optional Accessories (sold separately) IONFP ION Blank face plate WMBP Wall Mount Bracket: 5.0” [127 mm].

ION002-AD

Features Specifications Slots ION001-A (1) Slot in front for ION™ slide-in modules • Desktop installation ION002-AD (2) Slot in front for ION™ slide-in-modules Unit LEDs ION001-A None, Power indicator in on the slide-in-card • Supports WMBP wall mount brackets ION002-AD None, Power indicator in on the slide-in-card • Un-managed Chassis Dimensions ION001-A Width: 4.0” [102 mm] Depth: 7.1” [180 mm] • Supports any ION™ slide-in card Height: 1.4” [36 mm] ION002-AD Width: 4.0” [102 mm] that requires 6 watts or less of power Depth: 7.1” [180 mm] (C4120-1048 is not supported) Height: 1.4” [36 mm] Power ION001-A External AC/DC power supply included, • Fan-less design 120-240VAC input, 12VDC Output ION002-AD External AC/DC power supply included, • External AC power 120-240VAC input, 12VDC Output or an optional two-wire 21-60 VDC input terminal block • DC power input is an option on the 2 Environment Operating: 0°C - 50°C slot chassis Storage: -20 to +85 Humidity: 5% - 95% (non-condensing) • Support IP addressable managed ION™ Altitude: 0 to 10,000 ft. slide-in-cards Weight ION001-A: 2 lbs. [0.9 kg] ION002-AD: 3 lbs. [1.35 kg] Compliance UL listed, EN55022, EN55024, CE Mark, FCC Class A, CISPR Class A Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 4 IONPS-A AC Power Supply Module For The ION™ Platform

The ION™ Platform is an all new intelligent, high- density, multi-protocol system supporting a variety of network interface devices. Designed for both Ordering Information carrier class and enterprise network applications IONPS-A where multiple points of fiber integration and Redundant AC Power Supply for secure network management of the fiber interface 19-Slot ION™ Chassis devices is essential. Optional Accessories (sold separately) IONDCR The ION™ chassis can support up to two power Dry contact relay module for AC Power supply modules which mount in the rear of the Supply - SEE BELOW chassis. A single power supply can be used to power all the devices installed in the chassis; IONPS-A however the system can be made redundant with the use of a second power supply. In this Specifications configuration, the power supplies operate in an Application Up to 2 power supply modules can be used in the 19- instant-fail-over mode. slot ION™ chassis, ION219-A Unit LEDs PWR(Power): Indicates the power supply module is providing power to the ION™ chassis Compliance UL Listed (UL60950), FCC Class A, CISPR Class A, CE Mark Dimensions Width: 8.3” [211 mm] Depth: 9.0” [229 mm] Height: 3.4” [86 mm] Weight 3.4 lbs. [1.5 kg] Power Input 100 – 240 VAC, 47 – 63 Hz, 3.5 A @ 100 VAC Environment Operating : 0°C - 50°C Humidity : 5% - 95% (non-condensing) Altitude : 0 to 10,000 ft. Warranty Lifetime

IONDCR Dry Contact Relay Module

The IONDCR is a field installable dry contact relay module for the IONPS-A power supply. This module mounts in the lower right-hand corner of Ordering Information the IONPS-A face-plate, allowing the power supply IONDCR to be tied into a separate alarm circuit. Contacts Dry contact relay module for AC Power will be activated on the loss of power, enabling an Supply - SEE BELOW external visual or audible alarm. IONDCR

Applications for this type of fault alarm output would include enterprise networks as well as in industrial applications. The dry contact relay modules provides another layer of fault indicators, complementing network management software by providing a signal to either a local or remote alarm system.

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 5 IONPS-D DC Power Supply Module For The ION™ Platform

The ION™ Platform is an all new intelligent, high- density, multi-protocol system supporting a variety of network interface devices. Designed for both Ordering Information carrier class and enterprise network applications IONPS-D where multiple points of fiber integration and Redundant -48 VDC Power Supply Module for secure network management of the fiber interface 19-Slot ION™ Chassis devices is essential. Optional Accessories (sold separately) IONDCR-R1 The ION™ chassis can support up to two power Dry contact relay module for DC Power supply modules which mount in the rear of the Supply chassis. A single power supply can be used to power all the devices installed in the chassis; IONPS-D however the system can be made redundant with the use of a second power supply. In this Specifications configuration, the power supplies operate in an Application Up to 2 power supply modules can be used in the instant-fail-over mode. 19-slot ION™ chassis, ION219-D Unit LEDs PWR(Power): Indicates the power supply module is providing power to the ION™ chassis Compliance UL Listed (UL60950), FCC Class A, CISPR Class A, CE Mark Dimensions Width: 8.3” [211 mm] Depth: 9.0” [229 mm] Height: 3.4” [86 mm] Weight 4.0 lbs. [6.35 kg] Power Input 48 VDC (40-60 VDC) @ 5A Environment Operating : 0°C - 50°C Humidity: 5% - 95% (non-condensing) Altitude : 0 to 10,000 ft. Warranty Lifetime

IONDCR-R1 Dry Contact Relay Module

The IONDCR is a field installable dry contact relay module for the IONPS-D power supply. This module mounts in the lower right-hand corner of Ordering Information the IONPS-D face-plate, allowing the power supply IONPS-D to be tied into a separate alarm circuit. Contacts Redundant -48 VDC Power Supply Module for will be activated on the loss of power, enabling an 19-Slot ION™ Chassis external visual or audible alarm. Optional Accessories (sold separately) IONDCR-R1 IONDCR-R1 Applications for this type of fault alarm Dry contact relay module for DC Power output would include enterprise networks Supply as well as in industrial applications. The dry contact relay modules provides another layer of fault indicators, complementing network management software by providing a signal to either a local or remote alarm system.

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 6 IONMM The ION™ Management Module

To take full advantage of the features and functions available with the ION™ Chassis, an ION™ Management Module is required. The ION™ Management Module connects to the chassis backplane and communicates with the Ordering Information individual cards in the ION™ Chassis. Only management traffiC to no end- IONMM user data traffic - is sent across the ION™ Chassis backplane to maintain Management Module for the ION™ Chassis security. Each slide-in-module for the ION™ Chassis has specific features and functions that are controlled via the ION™ Management Module. A network administrator can configure, monitor and troubleshoot ION™ slide-in-modules remotely via the ION™ Management Module. This remote management helps reduce Operating expenses (OpEx) by reducing technician dispatches. remote management allows for faster mean-time-to-repair (MTTR) by proactively IONMM receiving traps and alerts on potential issues. With less downtime you are able to focus on revenue generating aspects of your business. Transition Networks understands that no network is managed in the same manner and that different security levels and management interfaces are often required depending on the deployment of the ION™ Chassis.

With that in mind, we have made the ION™ Management Module one of the most versatile and secure management modules available today.

Access Methods Specifications Key Management Features • Web-browser: Access the ION™ Standards IEEE Std. 802.3, • Variety of management access Management Module using a standard IEEE Std. 802.1X methods including; telnet, web, web browser such as Internet Explorer Ports (2) 10/100 Mbps RJ-45 SNMP or Mozilla Firefox. USB 2.0 device port • Single slot design allows for more • Command Line Interface (CLI): CLI USB 2.0 host port slide-in-modules to be inserted in access can be done via telnet remotely Dimensions Width: 0.86” [22 mm] the ION™ Chassis or via the local console port on the Depth: 6.5” [165 mm] ION™ Management Module. Height: 3.4” [86 mm] • Based on Public MIBs • SNMP: Since the ION™ platform is Power Consumption 2 Watts under normal operation • 2 10/100 Ethernet interfaces based on public MIBs you can easily 4.8 Watts with full 2.5 Watts used by USB host port • TFTP upgrade/backup of slide-in- manage the ION™ with a standard (Example: Flash Drive connected requiring 2.5 Watts) network management system (NMS) modules Environment See chassis specifications [pg 3-4] such as SNMPc, HPOV or any other • Import/Export configuration files in standard SNMP platform. Weight 1 lb. [0.45 kg] human readable/editable format • Focal Point: Transition Networks Compliance EN55022 Class A, EN55024,CE Mark • Multiple community strings offers a free SNMP graphical user Warranty Lifetime interface (GUI) software (Focal Point) • SNTP for the management purposes. Focal Point offers full read and read/write capabilities in a user friendly GUI.

Security Features These security features allow you to control access to the ION™ Chassis via the ION™ Management Module to ensure that only authorized personnel are able to view and change the settings to the slide-in-modules. þ Management VLAN þ SSL þ SSH þ 802.1x/RADIUS þ SNMPv1 & v2c, and v3 þ ACL Rules

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 7 Part Number Key Chassis Cards

1 2 3 4 5 6 7 8 9 x x

Character #1 Characters #6, 7, 8, 9 S Stand-Alone 10 RJ-45 C Chassis 11 Multimode ST 13 Multimode SC Characters #2, 3 14 Single Mode SC 21 100BASE Ethernet 15 Single Mode SC Long Haul 22 10/100 Ethernet 16 Single Mode SC Extra Long Haul 31 1000BASE Ethernet 17 Single Mode SC Long Wave 1550 32 10/100/1000 Ethernet 19 Single Mode LC 41 10GBASE Ethernet 24 Extended Multimode SC 42 10/100/1000/10G 29 Single Fiber SC 60 T1/E1 30 Dual BNC 61 4xT1 62 DS3-T3/E3 33 RJ-11 35 Single Mode SC Long Wave 1550 Extended Characters #4, 5 39 Multimode LC 10 Standard Conversion 40 SFP Slot 20 Advanced Management 47 XFP Slot xx Unique Identifier 48 SFP+ Slot

Additional Expandable Characters (xx) Part numbers grow as new products with new features or capabilities are designed. For example: A1 Single Strand 1310TX/1550RX A2 Single Strand 1550TX/1310RX

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 8 For a Stand-Alone version, see E-100BTX-FX-05(xxxx) [ pg 45 ] C2110 Series ION™ Fast Ethernet Media Converter Module 100BASE-TX to 100BASE-FX

The ION™ C2110 device provides an interface between 100Base-TX ports and 100Base-FX ports allowing users to integrate fiber optic cabling into 100Base-TX copper environments. Ordering Information C2110-1011 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm MM (ST) [2 km/1.2 mi.] Link Budget: 11.0 dB C2110-1013 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm MM (SC) [2 km/1.2 mi.] C2110-1013 Link Budget: 11.0 dB C2110-1039 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm MM (LC) [2 km/1.2 mi.] Features Specifications Link Budget: 11.0 dB Standards IEEE 802.3 • Auto-Negotiation of speed and duplex C2110-1014 on TP port Data Rate 100 Mbps, Layer-1 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm SM (SC) [20 km/12.4 • Auto-MDI/MDIX on TP port Switches SW1: Auto-Negotiation (UP = enabled) SW2: Pause (UP=enabled) mi.] • Link Pass Through (LPT1) SW3: Link Pass Through (UP = enabled) Link Budget: 16.0 dB fault monitoring SW4: Far-End-Fault (FEF) (UP = enabled) C2110-1019 • Far-End-Fault (FEF) (FEF) detection Internal Jumpers Auto-MDI/MDIX: Enable/Disable 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm SM (LC) [20 km/12.4 • Automatic Link Restoration Jumpers Hardware: Mode of operation is determined by the settings mi.] on the 4-position switch Link Budget: 17.3 dB • Pause advertisement Software: Mode of operation is determined by the most recently saved on-board microprocessor settings C2110-1040 • Field Upgradeable Firmware 100BASE-TX (RJ-45) [100 m/328 ft.] Status LEDs PWR (Power): ON = Connection to powered backplane to 100Base-X SFP Slot (empty) • Can be used in any ION™ Platform LKC (Copper Link): ON = Copper Link Chassis RXC (Receive Copper): Blinking = Data recieved on Copper link Single Fiber Products • Standards based, will link with any LKF (Fiber Link): ON = Fiber Link Standard 100Base-TX and any RXF (Receive Fiber): Blinking = Data received on Fiber Link Recommended use in pairs Standard 100Base-FX ports Dimensions Width: 0.86” [22 mm] C2110-1029-A1 Depth: 6.5” [165 mm] 100BASE-TX (RJ-45) [100 m/328 ft.] Height: 3.4” [86 mm] to 100BASE-FX 1310nm TX/1550nm RX single fiber single mode (SC) [20 km/12.4 mi.] Manageable Features* Power Consumption 2.5 Watts, 200 mA @ 13.9 VDC Link Budget: 19.0 dB Report converter status to chassis Environment See chassis specifications [pg 3-4] C2110-1029-A2 Weight 1 lb. [.45 kg] 100BASE-TX (RJ-45) [100 m/328 ft.] management software: to 100BASE-FX 1550nm TX/1310nm RX Compliance CISPR/EN55022 Class A, FCC Class A, CE Mark single fiber single mode (SC) [20 km/12.4 mi.] • TP and Fiber Link Status Warranty Lifetime Link Budget: 19.0 dB • Hardware switch settings • Copper Port Speed • TP and Fiber Port Duplex • Fault condition

Write operation includes: • Power on/off device • Auto-Negotiation enable/disable • Force 10 Mbps or 100 Mbps *Manageable Features are available when used in an ION™ Platform • Force half or full duplex chassis along with an ION™ Management Module. • Select advertising modes when Auto-Negotiation is enabled • LPT enable/disable • FEF enable/disable • Pause enable/disable • Auto-MDI/MDIX enable/disable

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 9 For a Stand-Alone version, see SBFTF10xx-10x [ pg 50 ] C2210 Series ION™ Fast Ethernet Media and Rate Converter Module Fast Ethernet 10/100BASE-TX to 100BASE-FX

The ION™ C2210 device provides an interface between 10/100Base-TX ports and 100Base-FX ports allowing users to integrate fiber optic cabling into 10/100Base-TX copper environments. Ordering Information C2210-1011 Operating at Later-2, this converter not only converts copper to fiber, it also 10/100BASE-TX (RJ-45) [100 m/328 ft.] does Rate conversion, converting 10/100 copper to 100Base fiber. to 100BASE-FX 1300nm MM (ST) [2 km/1.2 mi.] Link Budget: 11.0 dB C2210-1013 10/100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm MM (SC) [2 km/1.2 mi.] C2210-1013 Link Budget: 11.0 dB C2210-1039 10/100BASE-TX (RJ-45) [100 m/328 ft.] Features Specifications to 100BASE-FX 1300nm MM (LC) [2 km/1.2 • Auto-Negotiation of speed and duplex Standards IEEE 802.3u mi.] 802.3x Link Budget: 11.0 dB on TP port Data Rate 10 Mbps; 100 Mbps Layer-2 C2210-1014 • Auto-MDI/MDIX on TP port Max Frame Size 2048 bytes 10/100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm SM (SC) [20 km/12.4 • Link Pass Through (LPT) fault monitoring Frame Buffer Memory 512 Kbits mi.] Link Budget: 16.0 dB • Far-End-Fault (FEF) (FEF) detection MAC Address Table 1K Switches SW1: Auto-Negotiation (UP = enabled) C2210-1019 • Pause (Software Controlled) SW2: Forced 100 Mbps/10 Mbps with Auto-Neg. off 10/100BASE-TX (RJ-45) [100 m/328 ft.] (UP = 100 Mbps) to 100BASE-FX 1300nm SM (LC) • Automatic Link Restoration SW3: Forced Full/Half Duplex with Auto-Neg. off (UP = Full) [20 km/12.4 mi.] SW4: Full/Half Duplex on fiber port (UP = Full) Link Budget: 17.3 dB • Field Upgradeable Firmware SW5: Auto-MDI/MDIX on UTP (UP = enabled) C2210-1040 SW6: Link Pass Through (UP = enabled) • Can be used in any ION™ Platform 10/100BASE-TX (RJ-45) [100 m/328 ft.] to 100Base-X SFP Slot (empty) Chassis Internal Jumpers Auto-MDI/MDIX: Enable/Disable Jumpers Hardware: Mode of operation is determined • Standards based, will link with any by the settings on the 4-position switch

standard 10/100Base-TX and any Software: Mode of operation is determined by the Single Fiber Products standard 100Base-FX ports most recently saved on-board microprocessor settings Recommended use in pairs Status LEDs FD (Fiber Duplex): ON= Full-duplex on fiber C2210-1029-A1 LACT (Fiber Link/Activity): ON = Fiber Link 10/100BASE-TX (RJ-45) [100 m/328 ft.] Manageable Features* PWR (Power): ON=Connection to to 100BASE-FX 1310nm TX/1550nm RX Report converter status to chassis powered backplane single fiber single mode (SC) (TP. Duplex/Link): Yellow = Half duplex, [20 km/12.4 mi.] management software: Green = Full Duplex Link Budget: 19.0 dB (TP. Speed): Yellow = 10Mbps, • TP and Fiber Link Status Green = 100 Mbps C2210-1029-A2 10/100BASE-TX (RJ-45) [100 m/328 ft.] Dimensions Width: 0.86” [22 mm] • Hardware switch settings to 100BASE-FX 1550nm TX/1310nm RX single Depth: 6.5” [165 mm]; fiber single mode (SC) Height: 3.4”[8 6mm] • Copper Port Speed [20 km/12.4 mi.] Power Consumption 2.5 Watts, 200 mA @ 13.9 VDC Link Budget: 19.0 dB • TP and Fiber Port Duplex Environment See chassis specifications [pg 3-4] • Fault condition Weight 1 lb. [.45 kg] Compliance CISPR/EN55022 Class A, FCC Class A, CE Mark, EN55024 Write operation includes: Warranty Lifetime • Power on/off device • Auto-Negotiation enable/disable • Force 10 Mbps or 100 Mbps

• Force half or full duplex *Manageable Features are available when used in an ION™ Platform chassis along with an ION™ Management Module. • Select advertising modes when Auto-Negotiation is enabled • LPT enable/disable • FEF enable/disable • Pause enable/disable • Auto-MDI/MDIX enable/disable

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 10 For a Stand-Alone version, see S2220 Series [ pg 52 ] C2220 Series ION™ Fast Ethernet Remotely Managed NID Module 10/100Base-TX to 100Base-FX with OAM/IP-Based Management

The ION™ 2220 Series of Network Interface Devices (NIDs) are a remotely managed product that offers IP or IP-Less management methods for secure delivery of Ethernet services for business and mobile backhaul applications. Ordering Information With MEF 9, 14 and 21 certification, the ION™ 2220 Series ensures you are C2220-1011 compliant with the latest standards. The ION™ 2220 Series is a product with 10/100/1000BASE-T (RJ-45) [100 m] advance features including – IEEE 802.3ah Link OAM, VLAN, QoS, SSH/SSL, to 100BASE-FX 1310nm MM (ST) [2 km/1.2 jumbo frame support and bandwidth allocation. mi.] Link Budget: 11.0 dB C2220-1013 10/100/1000BASE-T (RJ-45) [100 m] to 100BASE-FX 1310nm MM (SC) [2 km/1.2 C2220-1013 mi.] Link Budget: 11.0 dB C2220-1014 10/100/1000BASE-T (RJ-45) [100 m] Features Specifications to 100BASE-FX 1310nm SM (SC) • MEF 9, 14 + 21 certified Standards IEEE 802.3 [20 km/12.4 mi.] IEEE std. 802.3ah Link Budget: 16.0 dB • 802.3ah Link OAM IEEE Std. 802.1P IEEE std. 802.1Q C2220-1040 • 10K Jumbo Frame Support 10/100/1000BASE-T (RJ-45) [100 m] Data Rate Copper: 10/100/1000 Mbps to 100Base-X SFP Slot (empty) • Two selectable Remote Fiber: 100 Mbps Management modes - IP-Based Remote Management Filtering Address 8K MAC Addresses Single Fiber Products - In-Band (remote device Max Frame Size 10,240 bytes managed by local peer) C2220-1029-A1 Dimensions Width: 0.86” [22 mm] 10/100/1000BASE-T (RJ-45) [100 m] Depth: 6.5” [165 mm] • Auto-MDI/MDIX to 100BASE-BX-U 1310nm TX/1550nm RX Height: 3.4” [86 mm] Bi-Di SM (SC) [20 km/12.4 mi.] • Auto-Negotiation Power Consumption 4.5 Watts Link Budget: 19.0 dB • Pause Environment See chassis specifications [pg 3-4] C2220-1029-A2 10/100/1000BASE-T (RJ-45) [100 m] • Transparent Link Pass Through Weight 1 lb. [.45 kg] Far-End-Fault (FEF) to 100BASE-BX-U 1550nm TX/1310nm RX Compliance EN55022 Class A, EN55024, CE Mark Bi-Di SM (SC) [20 km/12.4 mi.] • Remote Loopback Warranty Lifetime Link Budget: 19.0 dB • Field Upgradeable Firmware *Note all units feature USB port for local • IEEE 802.1p q VLAN and double VLAN management application. tagging with 4096 VIDs • DHCP client Applications • SNTP • Ethernet in the First Mile (EFM) • TFTP • Fiber-to-the-Premise (FTTP) • RADIUS client • E-Line Services (EPL & EVPL) • RMON counters for each port • Enterprise Markets • Bandwidth profiling • DMI Optical Management • Cable diagnostic function for copper ports • SSH • Telnet • Command Line Interface (CLI) • Web management • Focal Point management • SNMP v1, v2c, and v3 • USB port for basic setup • Management VLAN

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 11 For a Stand-Alone version, see S3100-Series [ pg 54 ] C3100 Series ION™ Fiber to fiber Media Converter Module SFP to SFP for data rates from 100Mbps to 2.5 Gbps

This fiber to fiber converter card is a protocol independent device that supports data rates from 100Mbps up to 2.5 Gbps. Installed in Ordering Information an ION™ chassis, it provides reliable and cost-effective conversion between single mode and multimode fiber, while also providing wave- C3100-4040 100Mbps to 2.5Gbps fiber repeater with two length conversion in CWDM applications. As an SFP based device, this open SFP slots, any rate to same rate. ION™ any-rate to similar-rate converter offers great application flexibility. Chassis Card media converter Supported protocols, fiber connectors, and transmission distances are determined by the SFP module used on the converter.

C3100-4040

Features Specifications • ION™ Chassis Card Standards Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP) • Protocol Transparent Data Rates Protocol Independent 100Mbps to 2.5 Gbps • Supports data rates from 100Mbps to Max. Frame Size 16384 bytes Jumbo Frames Supported 2.5Gbps Status LEDs PWR ON (Green) = Power • Any-rate to similar-rate conversion Port 1 Link ON = Fiber Signal Detected Port 2 Link ON = Fiber Signal Detected • SFP to SFP Fiber Repeater Dimensions Width: 0.86” [22 mm] • Specific wavelength CWDM Depth: 6.5” (165mm) Height: 3.4” (86mm) Transponder Power Source Source: External AC/DC required: 12VDC, __Amps • Supported protocols: Fast Ethernet, Consumption: 2-3 watts, based on the SFP modules used Gigabit Ethernet, SONET (OC-3/12/48), Environment Operating: See chassis specifications [pg 3-4] 1 & 2 Gig Fiber Channel, 2.5G Weight 1 lbs InfiniBand, FDDI, ESCON/SBCON MTBF Greater than 250,000 hours (MIL-HDBK-217F) • DMI, Digital diagnostics statistics Greater than 687,000 hours (Bellcore) available through ION™ Management Compliance FCC Class A, EN55022 Class A, EN55024,CE Mark Module Warranty Lifetime • Link Pass Through • Auto Link Restore

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 12 For a Stand-Alone version, see SGETF10xx-110 Series [ pg 56 ] C3110 Series ION™ Gigabit Ethernet Media Converter Module 1000BASE-T to 1000BASE-SX/LX

The ION™ C3110 device provides an interface between 1000Base-T ports and 1000Base-SX/LX ports allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Ordering Information C3110-1013 1000BASE-T (RJ-45) [100 m/328 ft.] to 1000BASE-SX 850nm MM (SC) [220m/721 ft. and 550 m/1804 ft.] Link Budget: 8.5 dB C3110-1024 1000BASE-T (RJ-45) [100 m/328 ft.] to 1000BASE-SX 1310nm extended MM (SC) [2 C3110-1013 km/1.2 mi.] Link Budget: 7.0 dB C3110-1014 1000BASE-T (RJ-45) [100 m/328 ft.] Features Specifications to 1000BASE-LX 1310nm SM (SC) • Copper and Fiber Auto-Negotiation Standards IEEE 802.3ab [10 km/6.2 mi.] IEEE 802.3z Link Budget: 10.5 dB IEEE 802.3 2000 • Auto-MDI/MDIX on TP port C3110-1040 Data Rate 1000 Mbps, Layer-1 1000BASE-T (RJ-45) [100 m/328 ft.] • Link Pass Through Switches SW1: Remote Fiber Fault Detect to 1000Base-X SFP Slot (empty) • Remote Fault Detect SW2: Pause (symmetric) SW3: Pause (asymmetric) • Loopback SW4: Transparent Link Pass Through (Up=Enabled) Single Fiber Products SW5: Fiber Auto-Negotiation (Down=Enabled) C3110-1029-A1 SW6: Loopback • Pause 1000BASE-T (RJ-45) [100 m/328 ft.] Jumpers Hardware: Mode of operation is determined by to 1000BASE-LX 1310nm TX/1550nm RX • Automatic Link Restoration the settings on the 4-position switch single fiber single mode (SC) Software: Mode of operation is determined by the most [20 km/12.4 mi.] • Field Upgradeable Firmware recently saved on-board microprocessor settings Link Budget: 13.0 dB • Can be used in any ION™ Platform Status LEDs LKF (fiber link): On = Fiber Link, blinking activity C3110-1029-A2 Chassis PWR (Power): On = Connection to powered backplane 1000BASE-T (RJ-45) [100 m/328 ft.] TP LED 1 (Copper Link): On = Link, bliking activity to 1000BASE-LX 1550nm TX/1310nm RX • Cost effective fiber deployment TP LED2 (Copper Duplex): On = Full Duplex single fiber single mode (SC) by pairing C3110 with lower cost Dimensions Width: 0.86” [22 mm] [20 km/12.4 mi.] 1000Base-T switches, offering the Depth: 6.5” [165 mm] Link Budget: 13.0 dB benefits of fiber without the high costs Height: 3.4” [86 mm] Power Consumption 3.6 Watts, 300mA @ 112 VDC • Standards based, will link with any standard 1000Base-T and any standard Environment See chassis specifications [pg 3-4] 1000Base-SX or LX ports Weight 1 lb [.45 kg] Compliance CISPR/EN55022 Class A, FCC Class A, CE Mark, EN55024 Manageable Features* Warranty Lifetime Report converter status to chassis management software: • Copper and Fiber link/receive status • Hardware switch settings • Receive error count

Write operation includes: *Manageable Features are available when used in an ION™ Platform • Write operation enable/disable chassis along with an ION™ Management Module. • Power on/off device • Auto-Negotiation enable/disable • Remote Fiber Fault Detect • Link Pass Through enable/disable • Pause enable/disable • Symetric Pause • Asymmetric TX Pause • Asymetric RX Pause

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 13 For a Stand-Alone version, see SGFEB10xx-x3x [ pg 57 ] C3210 Series ION™ Gigabit Ethernet Media and Rate Converter Module 10/100/1000BASE-T to 1000BASE-SX/LX

The ION™ C3210 device provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports allowing users to integrate fiber optic cabling into 10/100/1000Base-T copper environments. Ordering Information C3210-1013 Operating at Later-2, this converter not only converts copper to fiber, it also 10/100/1000BASE-T (RJ-45) [100 m] does Rate conversion, converting 10/100/1000 copper to 1000Base fiber. to 1000BASE-SX 850nm MM (SC) [62.5/125 µm fiber: 220 m/722 ft.] [50/125 µm fiber: 550 m/1804 ft.] Link Budget: 8.5 dB C3210-1024 10/100/1000BASE-T (RJ-45) [100 m] C3210-1040 to 1000BASE-SX 1310nm extended MM (SC) [2 km/1.2 mi.] Link Budget: 7.0 dB C3210-1014 Features Specifications 10/100/1000BASE-T (RJ-45) [100 m] • Copper and Fiber Auto-Negotiation Standards IEEE 802.3 to 1000BASE-LX 1310nm SM (SC) IEEE 802.3ab [10 km/6.2 mi.] • Switch Selectable Speeds IEEE 802.3u Link Budget: 10.5 dB IEEE 802.3z C3210-1040 • Auto-MDI/MDIX IEEE 802.3p IEEE 802.3q 10/100/1000BASE-T (RJ-45) [100 m] to 1000Base-X SFP Slot (empty) • Link Pass Through Data Rate 10/100/1000 Mbps; Layer-2 • Remote Fault Detect Max Frame Size 10,240 Bytes (jumbo frame support) Single Fiber Products 1,632 Bytes when linked to an xGFEB10xx-120 C3210-1029-A1 • Pause Switches SW1: TP Auto-Negotiation 10/100/1000BASE-T (RJ-45) [100 m] SW2: TP Speed to 1000BASE-LX 1310nm TX/1550nm RX • Automatic Link Restoration SW3: TP Duplex single fiber single mode (SC) SW4: Link Pass Through [20 km/12.4 mi.] • IEEE 802.1P QoS, IPv4 TOS/Diffserv, SW5: Fiber Duplex Link Budget: 13.0 dB IPv6 traffic class SW6: Unused Jumpers Hardware/Software mode, Auto-MDI/MDIX C3210-1029-A2 • IEEE 802.1q Port VLAN, tagging and 10/100/1000BASE-T (RJ-45) [100 m] doubling tagging (Q in Q) Status LEDs PWR (Power): ON = Connection to powered to 1000BASE-LX 1550nm TX/1310nm RX backplane single fiber single mode (SC) • Field Upgradeable Firmware LACT (Fiber Link): ON=Fiber link, Blinking=activity [20 km/12.4 mi.] UTP Duplex/Link: Orange=half duplex link, Link Budget: 13.0 dB • Virtual Cable Test on UTP port Blinking = half duplex activity, Green = Full duplex link, Blinking =Full duplex activity, • Uni-directional data transmission Off = 10 Mbps operation (or no link), Orange = 100 Mbps operation, Green = 1000 Mbps operation • Bandwidth Allocation Dimensions Width: 0.86” [22 mm] • DMI, digital diagnostics per SFF-8472 Depth: 6.5” [165 mm] Height: 3.4” [8 6 mm] • RMON counters for each port Power Consumption 3.6 Watts, 300mA @ 12 VDC Environment See chassis specifications [pg 3-4] Weight 1 lb [.45 kg] Compliance CISPR/EN55022 Class A, EN55024, EN61000, FCC Class A, CE Mark Warranty Lifetime

Applications • Intergrate fiber into copper based networking environments • Can be used in any ION™ Platform Chassis • Bridging legacy 10/100 devices into a Gigabit Backbone • Secure Uni-directional transmission • Standards based, will link with any standard 10/100/1000Base-T and any standard 1000Base-SX or LX ports

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 14 For a Stand-Alone version, see S3220 Series [ pg 59 ] C3220 Series ION™ Gigabit Ethernet Remotely Managed NID Module 10/100/1000Base-T to 1000Base-X with OAM/IP-Based Management

The ION™ 3220 Series of Network Interface Devices (NIDs) are a remotely managed product that offers IP or IP-Less management methods for secure delivery of Ethernet services for business and mobile backhaul applications. Ordering Information With MEF 9, 14 & 21 certification the ION™ 3220 Series ensures you C3220-1013 are compliant with the latest standards. The ION™ 3220 Series is a 10/100/1000BASE-T (RJ-45) [100 m] 10/100/1000Mbps product with advance features including – IEEE 802.3ah to 1000BASE-SX 850nm MM (SC) [62.5/125 Link OAM, VLAN, QoS, SSH/SSL, jumbo frame support and bandwidth µm fiber: 220 m/722 ft.] [50/125 µm fiber: 550 m/1804 ft.] allocation. Link Budget: 8.5 dB C3220-1014 10/100/1000BASE-T (RJ-45) [100 m] C3220-1040 to 1000BASE-LX 1310nm SM (SC) [10 km/6.2 mi.] Link Budget: 10.5 dB *C3220-1040 Features Specifications 10/100/1000BASE-T (RJ-45) [100 m] • MEF 9, 14 + 21 certified Standards IEEE 802.3 to (1) 100/1000Base-X SFP Slot (empty) IEEE 802.3ah • 802.3ah Link OAM IEEE 802.1P *C3221-1040 IEEE 802.1Q 10/100/1000BASE-T (RJ-45) [100 m] • 10K Jumbo Frame Support IEE Std. 802.1X to (2) 100/1000Base-X SFP Slots (empty) • Two selectable Remote Management Data Rate Copper: 10/100/1000 Mbps Fiber: 1000 Mbps modes: Single Fiber Products Filtering Addresses 8K MAC Addresses - IP-Based Remote Management C3220-1029-A1 - In-Band (remote device managed by Max Frame Size 10,240 bytes 10/100/1000BASE-T (RJ-45) [100 m] local peer) Dimensions Width: 08.6” [22 mm] to 1000BASE-BX-U 1310nm TX/1490nm RX • Auto-MDI/MDIX Depth: 6.5” [165 mm] Bi-Di SM (SC) [20 km/12.4 mi.] Height: 3.4” [86 mm] Link Budget: 14.0 dB • Auto-Negotiation Power Consumption 4.5 Watts C3220-1029-A2 • Pause 10/100/1000BASE-T (RJ-45) [100 m] Environment See chassis specifications [pg 3-4] to 1000BASE-BX-D 1490nm TX/1310nm RX • Transparent Link Pass Through Weight 1 lb. [.45 kg] Bi-Di SM (SC) [20 km/12.4 mi.] Link Budget: 14.0 dB • Far-End-Fault (FEF) Compliance EN55022 class A, EN55024, CE Mark • Remote Loopback Warranty Lifetime Note: all units feature USB port for local management application. • Field Upgradeable Firmware

• IEEE 802.1p QoS packet classification *S3220-1040 and S3221-1040 have SGMII support for use with 10/100/1000BASE-T • IPv4 IP TOS, DiffDerv and IPv6 traffic copper SFPs. class QoS classification • IEEE 802.1q VLAN and double VLAN tagging with 4096 VIDs Applications Optional Accessories (sold separately) • DHCP client • Ethernet in the First Mile (EFM) • E-Line Services (EPL & EVPL) SFP Modules USB Cables • SNTP • Fiber-to-the-Premise (FTTP) • Enterprise Markets • TFTPt • RADIUS client • RMON counters for each port • Bandwidth profiling • DMI Optical Management • Cable diagnostic function for copper ports • SSH • Telnet • Command Line Interface (CLI) • Web management • Focal Point Management • SNMP v1, v2c, and v3 • USB port for basic setup • Management VLAN

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 15 For a Stand-Alone version, see S3230 Series [ pg 60 ] C3230 Series ION™ Gigabit Ethernet Remotely Managed NID Module 10/100/1000Base-T to 1000Base-X with OAM/IP-Based Management

The ION 3230 Series of Network Interface Devices (NIDs) are multi-service NIDs that provide SLA-assurance and advance fault management that is compliant with MEF and IEEE standards. The ION 3230 Series are designed for Ordering Information business Ethernet and mobile backhaul deployments. The ION S3230 Series C3230-1013 are MEF 9, 14 & 21 certified. The ION 3230 Series is a 10/100/1000Mbps 10/100/1000BASE-T (RJ-45) [100 m] to product with advance features including – IEEE 802.1ag Service OAM, IEEE 1000BASE-SX 850nm MM (SC) [62.5/125 µm 802.3ah Link OAM, ITU Y.1731 Performance Monitoring, VLAN, QoS, SSH/SSL, fiber: 220 m/722 ft.] [50/125 µm fiber: 550 m/1804 ft.] jumbo frame support and bandwidth allocation. Link Budget: 8.5 dB C3230-1014 C3230-1040 10/100/1000BASE-T (RJ-45) [100 m] to 1000BASE-LX 1310nm SM (SC) [10 km/6.2 mi.] Link Budget: 10.5 dB *C3230-1040 Features Specifications 10/100/1000BASE-T (RJ-45) [100 m] to • MEF 9, 14 + 21 certified Standards IEEE 802.3 (1) 100/1000Base-X SFP Slot (empty) IEEE 802.3ah • 802.3ah Link OAM IEEE 802.1P *C3231-1040 IEEE 802.1Q 10/100/1000BASE-T (RJ-45) [100 m] to • ITU Y.1731 (2) 100/1000Base-X SFP Slots (empty) Data Rate Copper: 10/100/1000 Mbps • 802.1ag Service OAM Fiber: 1000 Mbps • 10K Jumbo Frame Support Filtering Address 8K MAC Addresses Single Fiber Products Max Frame Size 10,240 bytes C3230-1029-A1 • Two selectable Remote Management modes: 10/100/1000BASE-T (RJ-45) [100 m] to Dimensions Width: 3.25” [82 mm] - IP-Based Remote Management 1000BASE-BX-U 1310nm TX/1490nm RX Depth: 6.5” [165 mm] - In-Band (remote device managed single fiber single mode (SC) Height:1.0” [25 mm] by local peer) [20 km/12.4 mi.] • Auto-MDI/MDIX Power Input: 100-240 VAC,1A Link Budget: 14.0 dB Output: 12 VDC, 1.25A • Auto-Negotiation C3230-1029-A2 Environment See chassis specifications [pg 3-4] 10/100/1000BASE-T (RJ-45) [100 m] to 1000BASE-BX-D 1490nm TX/1310nm RX • Pause Weight 2.0 lbs. [0.90 kg] single fiber single mode (SC) • Transparent Link Pass Through Compliance EN55022 Class A, EN55024, UL60950,CE Mark [20 km/12.4 mi.] Link Budget: 14.0 dB • Far-End-Fault (FEF) Warranty Lifetime • Remote Loopback Note: all units feature USB port for local • Field Upgradeable Firmware management application. • IEEE 802.1p QoS packet classification • IPv4 IP TOS, DiffDerv and IPv6 traffic *C3230-1040 and C3231-1040 have SGMII class QoS classification support for use with 10/100/1000BASE-T copper SFPs. • IEEE 802.1q VLAN and double VLAN tagging with 4096 VIDs Applications Optional Accessories (sold separately) • DHCP client SFP Modules • SNTP • Ethernet in the First Mile (EFM) • E-Line Services (EPL & EVPL) • TFTP • Fiber to the Premise (FTTP) • Enterprise Markets • RADIUS client • RMON counters for each port • Bandwidth profiling • DMI Optical Management • Cable diagnostic function for copper ports • SSH • Telnet • Command Line Interface (CLI) • Web management • Focal Point Management • SNMP v1, v2c, and v3 • USB port for basic setup • Management VLAN Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 16 For a Stand-Alone version, see S4110 Series [ pg 61 ] C4110 Series ION™ Fiber to Fiber Media Converter Module SFP+ to SFP+ for Data Rates from 1Gbps to 11.5 GBps

The C4110-4848 is a 10Gbps protocol independent media converter with two pluggable SFP+ ports. Each port can support data rates from 1Gbps up to 11.5Gbps allowing network designers to customize the C4110 with a Ordering Information pair of SFP modules from Transition Networks’ wide SFP product offering, C4110-4848 to meet their network requirements. The C4110-4848 can be used as an 1 Gbps to 11.5Gbps fiber repeater with two any-rate to similar-rate fiber mode converter, as well as a WDM transponder. open Management of the card is available through the IONMM when installed in SFP+ slots, any rate to same rate ION™ slide- in-card media converter an ION™ Chassis. Optional Accessories (sold separately) SFP Modules C4110-4848 Choose from a wide variety of SFP and SFP+ modules offered by Transition Networks Features Specifications • ION™ chassis Card Standards IEEE 802.3ae, ITU.G.709 • Fiber to fiber repeater SFF8431 Multi-sourcing Agreement (MSA) • Remotely Managed when installed in a Small Form Factor Pluggable (SFP) Managed ION™ Chassis Data Rate Protocol Independent, 1Gbps to 11.5Gbps TDM Port (T1) PWR: On = Power • Supports data rates from 1Gbps to Port 1 Link/Act: On = Link, Flashing = Network Traffic 11.5Gbps Port 2 Link/Act: On = Link, Flashing = Network Traffic • Support Any-rate to Same-rate Dip Switches Only 4 of the 8 Dip Switches are used to select the operational data rate, see the user guide for the • Protocol Transparent, supports: supported dip switch configurations o Ethernet: 10Gig LAN, 10Gig Wan Dimensions Width: 0.86” [22mm] 1Gig LAN Depth: 6.5” [165mm] o Fiber Channel: 10, 8, 4, 2, 1Gig Height: 3.4” [86mm] o SONET/SDN OC-192, OC-48 Power Consumption 4.2 watts • SFP to SFP or SFP+ to SFP+ Environment See chassis specifications [pg 3-4] Weight 1 lb. [0.45 kg] • Provides conversion between different types of fiber MTBF Greater than 250,000 hours (MIL-HDBK-217F) Greater than 687,000 hours (Bellcore) • Supported transmission distance based Compliance FCC Class A, CE Mark, EN55022 Class A, EN55024 on the SFP modules and type of fiber Waranty Lifetime used • Supports 3R (Re-amply, Re-shape, and Re-time) signal regeneration • No frame size limitations • Use as a fiber mode converter • Use as a specific wavelength CWDM Transponder • Link Pass Through • Auto Link Restore • Also available as a stand-alone converter

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 17 For a Stand-Alone version, see S4120 Series [ pg 62 ] C4120 Series ION™ 10 Gigabit Ethernet Media Converter Module 10GBase-T Copper to Fiber

The x4120-1048 is a 10 Gigabit Ethernet copper to fiber media converter. It offers conversion technology by providing one 10GBase-T RJ-45 port and one pluggable 10GBase-X fiber SFP+ port. The open SFP+ port supports a wide Ordering Information variety of Transition Networks 10GE SFP+ fiber modules, as well as third party C4120-1048 MSA compatible SFP+ modules. 10GBase-T RJ-45 100m to 10GBase-X SFP+ Slot (Empty) The x4120 provides several 10G Ethernet enterprise and data center connectivity solutions. Since most 10G Ethernet switches support a Optional Accessories (sold separately) combination of copper RJ-45 and open SFP+ ports, the x4120 allows users to convert either of these ports to the media type of their preference to match C4120-1048 their network requirements, including direct attached copper SFP+ cables. 10Gig SFP+ Modules The slide-in-card C4120 is a managed device when installed in a Managed TN-10GSFP-xx ION™ Chassis. 10GBase SFP+, MSA Compatible, for Dual Strand and Single Strand fiber Features Specifications TN-J9150A 10GBase SFP+, HP Compatible, • Transparent Link Pass Through Standards IEEE 802.3 10GBase-SR IEEE 802.3an • Auto-Negotiation IEEE 802.3ae TN-SFP-10G-xx IEEE 802.3az 10GBase SFP+, Cisco Compatible, for Dual Strand and Single Strand fiber • Auto-MDI/MDIX Data Rate 10 Gbps Status LEDs PWR (Power): On = power is on TN-CWDM-10G-1xx0-40 • Automatic Link Restoration 10GBase CWDM SFP+, L/A SFP+ (Fiber port link and activity statue): Cisco Compatible, 40km • Loopback on Fiber and Copper On = Link OK Flashing = Link and Activity OK TN-CWDM-10G-1xx0-80 • DMI Copper Link (Copper Link Status): 10GBase CWDM SFP+, On = Link OK Cisco Compatible, 80km • For use in ION™ Chassis Copper Act (Copper Link Activity): On = Activity OK DAC-10G-SFP-0xM • Manageable when installed in a 10G SFP+ Direct Attached Copper Cable Dip Swithes SW1: Copper Loopback Assemblies (See SFP chapter for details) managed ION™ Chassis SW2: Fiber Loopback SW3: not used • Remote Firmware Upgrade SW4: Transparent Link Pass Through Fiber Port supported standards Dimensions Width: 0.86” [21.85 mm] 10GBase-SR Depth: 6.5” [165 mm] 10GBase-LRM Height: 3.4” [86.36 mm] 10GBase-LR Power External AC/DC power supply, Universal AC input, 10GBase-ER 12VDC 1.6A output 10GBase-ZR Power Consumption 10.5 watts • The open SFP+ port also supports: see product manual for chassis power guidelines - direct attached 10G copper cable Environment See chassis specifications [pg 3-4] assemblies Storage: -15°C - 65°C - both Class-I and Class-II fiber Weight 1 lb - SFP+ modules MTBF Greater than 250,000 hours (MIL-HDBK-217F) - SFP modules supporting Greater than 687,000 hours (Bellcore) WDM technology Compliance FCC Class A, EN55022 Class A, EN55024, CE Mark • Support 100m on Cat6a or higher UTP Warranty Lifetime • Per Energy Efficient Ethernet standards, IEEE 802.3az, UTP cable length is detected and power is adjusted according, to reduce power consumption on shorter UTP cable installs

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 18 For a Stand-Alone version, see S6010 Series [ pg 64 ] C6010 Series ION™ T1/E1 Network Interface Device Module T1/E1 over Fiber

The T1/E1 copper to fiber network interface device (NID) provides a solution for those users that need to extend T1/E1 or PRI connections over fiber. Ordering Information The T1/E1 supports Small Form Pluggable (SFP) transceivers to support C6010-1011 a variety of fiber types, distances and wavelengths to provide maximum Twisted Pair (RJ-48) [1.5 km/0.9 mi.] flexibility across a variety of network topologies. The use of Coarse Wave to 1300nm multimode (ST) [2 km/1.2 mi.] Division Multiplexing (CWDM) SFPs can be utilized to further increase the Link Budget: 11.0 dB bandwidth capacity of the fiber infrastructure. C6010-1013 The T1/E1NID must be used in pairs. A typical installation will include a Twisted Pair (RJ-48) [1.5 km/0.9 mi.] chassis card installed in the ION™ Platform locally and a stand-alone device to 1300nm multimode (SC) [2 km/1.2 mi.] Link Budget: 12.0 dB C6010-1040 installed at the remote location. C6010-1014 Twisted Pair (RJ-48) [1.5 km/0.9 mi.] to 1310nm single mode (SC) [20 km/12.4 mi.] Features Specifications Link Budget: 16.0 dB • Remote in-band management Standards ANSI T1.102 T1.402 C6010-1040 Twisted Pair (RJ-48) [1.5 km/0.9 mi.] • Local or Remote Loopbacks - Copper T1.408 ITU I.431 *to SFP slot (empty) or Fiber G.703 C6010-3040 G.736 • Switch selectable for T1 or E1 (2) Coax (BNC) G.775 *to SFP slot (empty) • Remote firmware upgrade G.823 ETSI 300-166 • LEDs for immediate visual status ETSI 300-233 TBR12/12 Single Fiber Products • Supports dual or single fiber Copper Connectors RJ-48, BNC Recommended use in pairs C6010-1029-A1 • Supports multimode and single mode Fiber Connectors SFP: LC connector Uses standard 100BASE-X/OC-3 SFP Fixed Optics: ST or SC connector Twisted Pair (RJ-48) [1.5 km/0.9 mi.] fiber at a variety of distances to 1310nm TX /1550nm RX single fiber SM (SC) Data Rates T1 = 1.544 Mbit/s, E1 = 2.048 Mbit/s [20 km/12.4 mi.] • Supports CWDM SFPs Status LED Power, Signal Detect Copper, Signal Detect Fiber Link Budget: 19.0 dB • SNMP management when used with Dimensions Width: 0.86” [22 mm] C6010-1029-A2 ION™ chassis and management module Depth: 6.5” [165 mm] Twisted Pair (RJ-48) [1.5 km/0.9 mi.] Height: 3.4” [86 mm] to 1550nm TX /1310nm RX single fiber SM (SC) [20 km/12.4 mi.] • Remote standalone can be managed Power Consumption 2.6 Watts by local peer Link Budget: 19.0 dB Environment See chassis specifications [pg 3-4] • Extend PRI over fiber Weight 1.0 lb. [.45 kg] *SFP port uses standard 100BASE-x/oc-3 SFP Compliance CISPR/EN55022 Class A; FCC Class A; CE Mark MTBF Greater than 250,000 hours (MIL-HDBD-217F) Greater than 687,000 hours (Bellcore) Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 19 For a Stand-Alone version, see S6110 Series [ pg 65 ] C6110 Series ION™ T1/E1/J1 Network Interface Device Module 4xT1/E1/J1 over Fiber

The ION™ 4xT1/E1/J1 copper to fiber network interface device (NID) provides a solution for those users that need to extend multiple T1/E1 connections over fiber. Ordering Information C6110-1011 The ION™ 4xT1/E1/J1 supports Small Form Pluggable (SFP) transceivers to 1300nm multimode (ST) [2 km/1.2 mi.] support a variety of fiber types, distances and wavelengths to provide maximum Link Budget: 11.0 dB flexibility across a variety of network topologies. to (4) RJ-48 [1.5 km/0.9 mi.] The use of Coarse Wave Division Multiplexing (CWDM) SFPs can be utilized C6110-1013 to further increase the bandwidth capacity of the fiber infrastructure. 1300nm multimode (SC) [2 km/1.2 mi.] Link Budget: 11.0 dB The ION™ 4xT1/E1/J1 NID must be used in pairs. A typical installation will to (4) RJ-48 [1.5 km/0.9 mi.] include a chassis card installed in the ION™ Platform locally and a stand- C6110-1013 alone device installed at the remote location. C6110-1014 1310nm single mode (SC) [20 km/12.4 mi.] Link Budget: 16.0 dB Features Specifications to (4) RJ-48 [1.5 km/0.9 mi.] C6110-1040 • 4 x RJ-48 copper interfaces Standards ANSI T1.102 T1.403 *1 SFP port (Empty) to (4) RJ-48 [1.5 km/0.9 mi.] • 1 fiber interface (fixed or SFP) T1.408 ITU I.431 2 SFP ports on C6111-1040 model C6111-1040 G.703 *2 SFP ports (Empty) G.736 • Loopback via test set to (4) RJ-48 [1.5 km/0.9 mi.] G.775 • Local and remote loopbacks G.823 ETSI 300-166 Single Fiber Products • LEDs for device status and ETSI 300-233 TBR 12/13 Recommended use in pairs troubleshooting AT&T Pub 62411 C6110-1029-A1 • Settings for line code, line build out, Switches Numerous switch settings for line coding, line build 1310nm TX/1550nm RX single fiber loopbacks and Alarm Indication Signal out, loopback and AIS single mode (SC) [20 km/12.4 mi.] (AIS) Data Rate Copper ports (RJ-48): T1(J1) = 1.544Mb/s, Link Budget: 19.0 dB E1 = 2.048Mb/s to (4) RJ-48 [1.5 km/0.9 mi.] • Access to complete status and SFP port(s) (empty): 100BASE-X/OC-3 C6110-1029-A2 configuration on local and remote device Status LEDs Power, Port Status, Loopback and AIS 1550nm TX/1310nm RX single fiber single mode (SC) [20 km/12.4 mi.] • Remote firmware upgrade Dimensions Width: 1.72” [44 mm] Link Budget: 19.0 dB Depth: 6.5” [165 mm] to (4) RJ-48 [1.5 km/0.9 mi.] • Remote management Height: 3.4” [86 mm] Power Consumption Dual fiber model: 6W max Single fiber model: 5.5W max *SFP port uses standard 100BASE-x/oc-3 SFP Environment See chassis specifications [pg 3-4] Safety Compliance EN55022 Class A, EN55024, CE mark Weight 1 lb. [0.45 kg] Warranty Lifetime

Applications • T1/E1/J1 extension over fiber • Mobile backhaul • Business customers

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 20 For a Stand-Alone version, see S6120 Series [ pg 66 ] C6120 Series ION™ T1/E1/J1 Network Interface Device Module 4xT1/E1/J1 + 10/100 Ethernet over Fiber

The ION™ 4xT1/E1/J1 copper to fiber network interface device (NID) provides a solution for those users that need to extend multiple T1/E1 connections and 10/100Mbps Ethernet over fiber. Ordering Information C6120-1011 The ION™ 4xT1/E1/J1 supports Small Form Pluggable (SFP) transceivers to 1300nm multimode (ST) [2 km/1.2 mi.] support a variety of fiber types, distances and wavelengths to provide Link Budget: 11.0 dB maximum flexibility across a variety of network topologies. to (4) RJ-48 [1.5 km/0.9 mi.] The use of Coarse Wave Division Multiplexing (CWDM) SFPs can be utilized to plus 10/100BASE-TX (RJ-45) [100m] further increase the bandwidth capacity of the fiber infrastructure. C6120-1013 1300nm multimode (SC) [2 km/1.2 mi.] The ION™ 4xT1/E1/J1 NID must be used in pairs. A typical installation will Link Budget: 11.0 dB include a chassis card installed in the ION™ Platform locally and a stand- to (4) RJ-48 [1.5 km/0.9 mi.] C6120-1013 alone device installed at the remote location. plus 10/100BASE-TX (RJ-45) [100m] C6120-1014 1310nm single mode (SC) [20 km/12.4 mi.] Features Specifications Link Budget: 16.0 dB • 4 x RJ-48 copper interfaces Standards ANSI T1.102 to (4) RJ-48 [1.5 km/0.9 mi.] T1.403 plus 10/100BASE-TX (RJ-45) [100m] T1.408 • 1 fiber interface (fixed or SFP) C6120-1040 ITU I.431 *1 SFP port (Empty) G.703 • 2 SFP ports on C6121-1040 model to (4) RJ-48 [1.5 km/0.9 mi.] G.736 plus 10/100BASE-TX (RJ-45) [100m] • 1 RJ-45 10/100Mbps Ethernet port G.775 G.823 C6121-1040 • Auto-MDI/MDIX ETSI 300-166 *2 SFP ports (Empty) ETSI 300-233 to (4) RJ-48 [1.5 km/0.9 mi.] • Pause (Flow Control) on Ethernet port TBR 12/13 plus 10/100BASE-TX (RJ-45) [100m] AT&T Pub 62411 • Loopback via test set IEEE 802.3™-2008 Switches Numerous switch settings for line coding, line Single Fiber Products • Local and remote loopbacks build out, loopback and AIS C6120-1029-A1 • LEDs for device status and Data Rate Copper ports (RJ-48): T1(J1) = 1.544Mb/s, 1310nm TX/1550nm RX single fiber SM (SC) troubleshooting E1 = 2.048Mb/s [20 km/12.4 mi.] LB: 19.0 dB Ethernet port (RJ-45): 10/100Mbps to (4) RJ-48 [1.5 km/0.9 mi.] • Settings for line code, line build out, SFP port(s) (empty): 100BASE-X/OC-3 plus 10/100BASE-TX (RJ-45) [100m] loopbacks and Alarm Indication Signal Status LEDs Power, Port Status, Loopback and AIS C6120-1029-A2 (AIS) Dimensions Width: 1.72” [44 mm] 1550nm TX/1310nm RX single fiber SM (SC) [20 km/12.4 mi.] LB: 19.0 dB • Access to complete status and Depth: 6.5” [165 mm] Height: 3.4” [86 mm] to (4) RJ-48 [1.5 km/0.9 mi.] configuration on local and remote plus 10/100BASE-TX (RJ-45) [100m] device Power Consumption dual fiber model: 6W max single fiber model: 5.5W max • Remote firmware upgrade Environment See chassis specifications [pg 3-4] *SFP port uses standard 100BASE-x/oc-3 SFP • Remote management Safety Compliance EN55022 Class A, EN55024, CE mark Weight 1 lb. [0.45 kg] Warranty Lifetime

Applications • T1/E1/J1 extension over fiber mobile backhaul • Business customers

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 21 For a Stand-Alone version, see S6210 Series [ pg 67 ] C6210 Series ION™ DS3-T3/E3 Network Interface Device Module DS3 – T3/E3 Coax over Fiber

The DS3 – T3/E3 copper to fiber network interface device (NID) provides a solution for those users that need to extend DS3 connections over fiber. Ordering Information The DS3 – T3/E3s supports Small Form Pluggable (SFP) transceivers C6210-3011 to support a variety of fiber types, distances and wavelengths to provide (2) Coax (BNC) to 1300nm multimode (ST) maximum flexibility across a variety of network topologies. The use of Coarse [2 km/ 1.2 mi.] Wave Division Multiplexing (CWDM) SFPs can be utilized tofurther increase Link Budget: 11.0 dB the bandwidth capacity of the fiber infrastructure. C6210-3013 The DS3 – T3/E3 NID must be used in pairs. A typical installation will include (2) Coax (BNC) to 1300nm multimode (SC) a chassis card installed in the ION™ Platform locally and a stand-alone [2 km/ 1.2 mi.] C6210-3040 device installed at the remote location. Link Budget: 11.0 dB C6210-3014 (2) Coax (BNC) to 1310nm single mode (SC) [20 km/12.4 mi.] Features Specifications Link Budget: 16.0 dB C6210-3040 • AIS (Alarm Indication Signal) Standards ANSI, ITU-TS, ETSI, G.823 for jitter tolerance, G.755 for loss of signal (2) Coax (BNC) to *SFP slot (empty) • Coax Line Build Out Coax Connectors 75 ohm coax Single Fiber Products • Switch selectable for DS3/T3 or E3 Fiber Connectors SFP: LC connector Uses standard 100BASE-X/OC-3 SFP Fixed Optics: ST or SC connector C6210-3029-A1 (2) Coax (BNC) to 1310nm TX/1550nm • Remote firmware upgrade Data Rates DS3/T3 = 44.7Mbps; E3 = 34.4Mbps RX single fiber single mode (SC) • Loopback – Coax and Fiber Status LEDs Power, Coax link status, coax loop-back status, AIS [20 km/12.4 mi.] on coax link; Fiber link status, fiber loop-back Link Budget: 19.0 dB status, AIS on fiber link • LEDs for immediate visual status] C6210-3029-A2 Dimensions Width: 0.86” [22 mm] (2) Coax (BNC) to 1550nm TX/1310nm • Supports dual or single fiber Depth: 6.5” [165 mm] RX single fiber single mode (SC) Height: 3.4” [86 mm] • Supports multimode and single mode [20 km/12.4 mi.] Link Budget: 19.0 dB fiber at a variety of distances Power Consumption 2.5 Watts Environment See chassis specifications [pg 3-4] • Supports CWDM SFPs S Weight 1 lb. [.45 kg] * FP port uses standard 100BASE-x/oc-3 SFP • SNMP management when used with Compliance CISPR/EN55022 Class A; FCC Class A; CE Mark ION™ chassis and management MTBF Greater than 250,000 hours (MIL-HDBD-217F) module Greater than 687,000 hours (Bellcore) • Remote standalone can be managed Warranty Lifetime by local peer

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 22 The IONADP allows the installation of Point System Converter Cards and Network Management Modules in the ION Platform

• Provides a migration path from Point System to the ION Platform • Leverages Point Systems long history of high quality and reliable products • Connects Legacy Network Equipment, easing network upgrades to future technologies • Only one management application is needed to manage both ION and Point System modules

Using the IONADP

• The ION Platform offers back-wards compatibility with the Point System • Allows re-deployment of existing Point System cards in the ION chassis • ION cards and Point System cards co-existing in the ION chassis allowing: - The ION management model will manage the ION converters cards - The Point System management module will manage the Point System converter cards

• Future proof the network and reducing CAPEX while supporting legacy systems IONADP CPSMM-120

The follow pages include some of the Point System cards that could be used in the ION chassis. For availability of other Point System slide-in-modules, contact your Transition Networks representative

23 IONADP The ION™ Adapter Use to Mount Point System™ Converter Modules in an ION™ Chassis

The IONADP is an adapter card that allows the ION™ Platform chassis to be backwards compatible with Point System™ modules. This adapter is designed to sit between a Point System™ module and the backplane Ordering Information of the ION™ chassis. The purpose of the IONADP is to lengthen the Point IONADP System™ module so it can be securely mounted in an ION™ chassis while Point System™ Adapter for the ION™ chassis, also connecting to the backplane allowing the ION™ chassis to power the includes bracket and screws Point System™ module.

SNMP management of the Point System™ modules installed in the ION™ chassis is possible by using a Point System™ management module along IONADP with IONADP. The ION™ modules and the Point System™ modules are managed independently by their own respective management modules. The ION™ management module and the Point System™ management module would each require a unique IP address assigned to them, while Focal Point can be used to access the management information from each management module simultaneously.

The IONADP adapter card allows the ION™ Platform to be backwards compatible with Point System™ slide-in-modules.

Features Specifications • Ease the migration from the Point Dimensions Width: 0.5” [12.7 mm] Depth: 1.25” [31.75 mm] System™ to ION™ Platform Height: 2.90” [73.66 mm] • Deploy Point System™ cards in the Environment See chassis specifications [pg 3-4] ION™ chassis Weight 0.5 lbs. [0.22 kg] • Legnthens a Point System™ card to Warranty Lifetime match the size of the ION™ card • Can be used with any Point System™ card • Manage Point System™ cards in the ION™ chassis • IONADP kit includes adapter card, bracket, and four screws.

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 24 CPSMM-120 Point System™ Management Module Single Slot Management Module

The CPSMM-120 is a Point System management module which can be installed in the ION 19-Slot chassis via the IONADP. This management module can be used to gain management access to any Point System Ordering Information converter cards installed in the same ION chassis. It occupies a single CPSMM-120 slot and fully supports all management features found in the Point System Single Slot Master Management Module modules.

CPSMM-120

Features Specifications Ports DB-9 (x1), RJ-45 (x1) • DB-9 serial interface for CLI (command line interface) LEDs Power, Link, TX, RX Storage Temp - 40°C to 80°C • RJ-45 port provides a 10ase-T network management interface Operating Temp See chassis specifications [pg 3-4] Weight 1 lb. [0.45 kg] • Included Power and Link Status LEDs Dimensions Width: 0.86” [22 mm] • Allow Point System modules to be Depth: 5.0” [127 mm] managed when installed in and ION Height: 3.4” [86 mm] Chassis Compliance FCC & CISPR Class A; CE Mark Warranty Lifetime • Management Tree View displays both ION cards and Point System cards • Management Access Methods • Transitions Focal Point GUI Application • Web-based interface • Command Line Interface via Console Port or Telnet • Focal Point can discover both ION management modules and Point System management modules • Displays all cards in Management Tree View

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 25 For a Stand-Alone version, see E-TBT-FRL-05(xx) [ pg 42 ] CETTF10xx-x0x Point System™ Ethernet Media Converter Module 10Base-T to 10Base-FL

Applications:

• Extend Network Distance: Two 10BASE-T to 10BASE-FL Media Converters used back-to-back Ordering Informatio extend the distance between two 10BASE-T devices up to 5 km (3.1 mi.) using multimode fiber, up to 40 km (24.9 mi.) using single mode CETTF1011-105 fiber without a repeater. 10BASE-T (RJ-45) [100 m/328 ft.] to 10BASE-FL 850nm MM (ST) [2 km/1.2 mi.] • Connect Unlike Devices: Link Budget: 13.5 dB Connect your workgroup to a distant server or a central switch; or CETTF1013-105 extend distances between like and unlike devices in either full or 10BASE-T (RJ-45) [100 m/328 ft.] CETTF1013-105 half-duplex modes. to 10BASE-FL 850nm MM (SC) [2 km/1.2 mi.] Link Budget: 13.5 dB CETTF1014-105 10BASE-T (RJ-45) [100 m/328 ft.] Features Specifications to 10BASE-FL 1310nm SM (SC) • Can be used with any Point System™ Standards IEEE 802.3 [20 km/12.4 mi.] Link Budget: 15.0 dB Chassis 4-position Switch Fiber Port: Enables/disables network traffic on the fiber port; (Up = enabled) • Auto-MDI/MDIX Copper Port: Enables/disables network traffic on Single Fiber Products he copper port; (Up = enabled) Recommended use in pairs Auto-MDI/MDIX: Enables/disables Auto-MDI/MDIX • Link Pass Through CETTF1029-105 function; (Up = enabled) 10BASE-T (RJ-45) [100 m/328 ft.] • Automatic Link Restoration Link Pass Through: Enables/disables Link Pass to 10BASE-FL 1310nm TX/1550nm RX single Through function; (Up = enabled) • Field Upgradeable Firmware fiber SM (SC) [20 km/12.4 mi.] 3-position Jumper Hardware: Converter mode is determined by Link Budget: 19.0 dB • Integrate mixed cabling environments 4-position switch settings Software: Converter mode is determined by most CETTF1029-106 in either switched or shared Ethernet recently saved on-board microprocessor setting 10BASE-T (RJ-45) [100 m/328 ft.] networks. to 10BASE-FL 1550nm TX/1310nm RX Status LEDs PWR (Power): On for normal operation; single fiber SM (SC [20 km/12.4 mi.] • Connect legacy 10BASE-T devices to a LKF (Link Fiber): Steady LED indicates good fiber link and Link Budget: 19.0 dB fiber based cabling infrastructure. normal operation; RXF (Receive Fiber): Flashing LED indicates data reception on fiber link; LKC (Link Copper): Steady LED indicates good copper link and normal operation; RXC (Receive Copper): Flashing LED indicates data reception on copper link Dimensions Width: 0.86” [22 mm] Depth: 5.0” [127 mm] Height: 3.4” [86 mm] Power Consumption 2.3 Watts Environment See chassis specifications [pg 3-4] Weight 1 lb. [0.45 kg] Compliance EN55022; EN55024; EN61000; CE Mark, Class A Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 26 For a Stand-Alone version, see SSEFE10xx-10x [ pg 44 ] CSEFE10xx-10x Point System™ Speed Selectable Media Converter Module 10Base-T to 10Base-FL or 100Base-TX to 100Base-FX

Transition Networks’ speed selectable copper to fiber Media Converter allows you to extend the distance between copper based connections with the use of fiber optic cable. The ability to select the speed of converter allows for Ordering Information easy migration from a 10 Mbps network today to a 100 Mbps network in the CSEFE1014-100 future. This converter is a true layer 1 device as both the copper and fiber 10BASE-T or 100BASE-TX (RJ-45) ports operate at the same speed setting (i.e. 100BASE-T to 100BASE-FX). For [100 m/328 ft.] 10 Mbps applications, these devices must be used in pairs. to 10BASE-FL or 100BASE-FX 1310nm SM (SC) [20 km/12.4 mi.] Link Budget: 17.0 dB

CSEFE1014-100 Features Specifications • Auto-MDI/MDIX Standards IEEE Std. 802.3 Switches Switch 1: Link Pass Through on/off • Automatic Link Restoration Switch 2: 10 Mbps or 100 Mbps operation • Field Upgradeable Firmware 3-position Jumper Hardware: Converter mode is determined by DIP switch settings Software: Converter mode is determined by most recently • Supports single mode fiber saved on-board microprocessor settings Status LEDs PWR (Power): Lit for normal operation • Report local converter status to chassis: F-ACT (Fiber Activity): Blinking = data reception on the fiber link - Copper/fiber link status F-100 (Fiber Speed): ON = link at 100 Mbps - Hardware/Software mode F-10 (Fiber Speed): ON = link at 10 Mbps - 10 Mbps or 100 Mbps speed C-ACT (Copper Activity): Blinking = data reception on the copper link setting C-100 (Copper Speed): ON = link at 100 Mbps - Link Pass Through on/off C-10 (Copper Speed): ON = link at 10 Mbps setting Dimensions Width: 0.86” [22 mm] • Write operation includes: Depth: 5.0” [127 mm] Height: 3.4” [86 mm] - Enable/disable Link Pass Through - Set speed to 10 Mb or 100 Mb Power Consumption 3.6 Watts - Can be used with any Point Environment See chassis specifications [pg 3-4] System™ Chassis Weight 1 lb. [0.45 kg] Compliance CISPR/EN55022 Class B; EN55024; EN60950 Class B; FCC Class B; CE Mark Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 27 For a Stand-Alone version, see SSETF101x-205 [ pg 48 ] CSETF101x-205 Point System™ Fast Ethernet Media Converter Module 10/100Base-TX to 10/100Base-SX

Used in pairs, this media converter can extend distances between two twisted pair switches or a switch and a server up to 300 m over multimode fiber (100BASE-SX). Ordering Information CSETF1011-205 10/100BASE-TX (RJ-45) [60 m/197 ft.] to 10/100BASE-SX 850nm multimode (ST) [300 m/984 ft.] CSETF1013-205 10/100BASE-TX (RJ-45) [60 m/197 ft.] to 10/100BASE-SX 850nm multimode (SC) [300 m/984 ft.] CSETF1011-205

Features Specifications • Auto-Negotiation Standards IEEE Std. 802.3; compliant with pending TIA/EIA 785 specification • Auto-MDI/MDIX Status LEDs PWR (Power) SX-ACT (Fiber Activity) • Link Pass Through SX-100 (Fiber Speed) SX-10 (Fiber Speed) • Automatic Link Restoration TX-ACT (Copper Activity) TX-100 (Copper Speed) • Field Upgradeable Firmware TX-10 (Copper Speed) • Can be used with any Point System™ Dimensions Width: 0.86” [22 mm] Chassis Depth: 5.0” [127 mm] Height: 3.4” [86 mm] Power Consumption 3.6 Watts Environment See chassis specifications [pg 3-4] Weight 1 lb. [0.45 kg] Compliance CISPR/EN55022 Class A & B; FCC Class A & B; CE Mark Warranty Lifetime

Applications • Lowest possible cost solution for fiber installation up to 300 m (100BASE-SX). • 10/100 on fiber is possible with 10/100BASE-SX. • Ideal for building backbone and horizontal cabling applications where cost and 10/100 auto-negotiation are critical.

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 28 For a Stand-Alone version, see SBFTF1010-130 [ pg 49 ] CBFTF1010-130 Point System™ Fault-Tolerant Redundant Link Protector 10/100Base-TX

Features Specifications Management Features* • Fault-tolerant redundant connections Standards IEEE Std. 802.3 Report converter status to chassis RJ-45 Connectors Type: 8-position, RJ-45 receptacle: management software: • Easy to install and use 1: TX+ 5: NC (no connection) 2: TX- 6: RX- • Media Converter Power • Supports half and full-duplex 3: RX+ 7: NC (no connection) transmission 4: NC (no connection) 8: NC (no connection) • Hardware switch settings • Copper Port Speed • Auto-MDI/MDIX on all 3 ports Dip Switches SW1: Auto-Negotiation Enable/Disable SW2: 10/100 Mbps • TP and Fiber Port Duplex • Auto-Negotiation SW3: Full/Half Duplex SW4: Redundancy/Switch • Fault condition • IEEE 802.3 compliant System LEDs Power (PWR): Indicates the presence of POWER Primary (PRI): Indicates a link is established on the • Nine diagnostic LEDs Primary port Write operation includes: Backup (BKP): Indicates the link has moved over to • Optional 3-port switch mode the Backup port • Power on/off device • Can be used with any Point System™ Per Port LEDs Lower Right: • Auto-Negotiation enable/disable Chassis Green indicates 100 Mbps; Orange indicates 10 Mbps; • Force 10 Mbps or 100 Mbps Flashing indicates Activity Lower Left: • Force half or full duplex Green indicates full-duplex; Off half-duplex • Select advertising modes when Dimensions Width: 0.86” [12 mm] Auto-Negotiation is enabled Depth: 5.0” [127 mm] Height: 3.4” [86 mm] • LPT enable/disable Power Consumption 2.4 Watts • FEF enable/disable Environment See chassis specifications [pg 3-4] • Pause enable/disable Weight 1 lb. [0.45 kg] Regulatory FCC Class A, EN55024, UL 60950, Note: Management features are available Compliance CE Mark when the converter is used in a managed Warranty Lifetime Point System™ Chassis

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 29 For a Stand-Alone version, see SSRFB10xx-100 [ pg 51 ] CSRFB10xx-10x Point System™ Fast Ethernet Remotely Managed NID Module 10/100Base-TX to 100Base-FX

TP Duplex/Link/Activity • Link Test Optional Accessories (sold separately) TP 10 Mbps/100 Mbps • Field Upgradeable Firmware Fiber Link/Activity SFP Modules Fiber Duplex Dimensions Width: 0.86” [22 mm] Depth: 5.0” [127 mm] Height: 3.4” [86 mm] Power Consumption 3.4 Watts Environment See chassis specifications [pg 3-4] Weight 2 lbs. [.90 kg] Compliance EN55022 Class A, EN55024; CE Mark Warranty Lifetime

Applications • Integrate fiber into 10/100 copper environments • Remote Mangement Local managed unit receives status updated from remote unit • Remote Loopback assists in identifying network problems • Bandwidth Control Independent ingress rate limiting on both ports

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 30 For a Stand-Alone version, see SGFEB10xx-x3x [ pg 57 ] CGFEB1040-140 & CGFEB4040-180 Point System™ Gigabit Ethernet Media Converter Module 10/100/1000 Ethernet Multiport

Multiport media converters provide copper to fiber conversion as well as fiber to fiber conversion. These converters can operate Ordering Information as 3 port switches or as a 2 port devices with fault tolerant fiber CGFEB1040-140 redundancy, while supporting a variety of Ethernet network speeds 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] and various cabling medium. to (2) 1000BASE-X SFP Slots (empty) CGFEB4040-180 100/1000BASE-X SFP Slot (empty) to (2) 1000BASE-X SFP Slots (empty)

Optional Accessories (sold separately) SFP Modules (-140) (-180) Features Specifications • Auto-Negotiation Standards IEEE 802.3 (copper and fiber ports) IEEE 802.3ab IEEE 802.3u • Switch Selectable Speeds (UTP) when IEEE 802.3z Auto-Negotiation is off IEEE 802.1P IEEE 802.1q • Auto-MDI/MDIX Data Rate TP (port 1): 10/100/1000 Mbps (-140 model only) • Far-End-Fault (FEF) (100Base-FX setting SFP (port 1): 100/1000 Mbps(-180 model only) on SFP (port 2,3): 1000 Mbps -180 model port 1 only) Filtering Addresses 8K MAC Addresses • Automatic Link Restoration Max Frame Size 802.3ac tagged: 1628 bytes Untagged: 1632 bytes • Fiber Redundancy (<50ms switching time) Status LEDs PWR: ON green = Power applied to card TP (Duplex/Link/Activity): • IEEE 802.1P QoS, IPv4 Tos/Diffserv, IPv6 Orange: ON = Half-duplex Link; traffic class BLINK = Activity; Green: ON = Full-duplex Link; • IEEE 802.1q VLAN tagging and double BLINK = Activity tagging (Q in Q) TP (10 Mbps/100 Mbps/1000 Mbps): • Field Upgradeable Firmware Off = 10 Mbs; Orange = 100 Mbs; Green = 1000 Mbs • Virtual Cable Test (VCT) on UTP port LACT (Fiber SFP Link/Activity): -140 model only Green: ON = Link; BLINK = Activity Dip Switches Switch 1: TX - Enable/Disable Auto-Negotiation • Bandwidth Allocation Switch 2: TX - Force 10 Mbps or 100 Mbps with Switch 1 off • SGMII support on port 1 for use with Switch 3: TX - Force Half or Full duplex with Switch 1 off 10/100/1000Base-T copper SFPs Switch 4: Enable/Disable Fiber Redundancy port (2/3) IEEE 5: Enable/Disable primary/secondary revert with -180 model only Switch 4 on • 100/1000Base-X, dual speed support IEEE 6: Enable/Disable P2 to P3 blocking on port 1 for use with 100Base-FX or Dip Switches Switch 1: Port 1 speed 100 Mbps/1000 Mbps 1000Base-SX/LX, SFPs -180 model only IEEE 2: Port 1 duplex full/half IEEE 3: Port 1 mode 1000Base-X/SGMII • DMI, Digital diagnostics per SFF-8472 IEEE 4: Enable/Disable Fiber Redundancy (port 2/3) • RMON Counters for each port IEEE 5: Enable/Disable primary/secondary revert with Switch 4 on IEEE 6: Enable/Disable P2 to P3 blocking Dimensions Width: 0.86” [22 mm] Depth: 5.0” [127 mm] Height: 3.4” [86 mm] Applications Power Consumption 6 Watts • Extend Network Distance Environment See chassis specifications [pg 3-4] Weight 1 lb. [0.45 kg] • Bridge legacy 10/100 devices to a Gigabit backbone Compliance CISPR/EN55022 Class A, EN55024, EN61000, FCC Class A, CE Mark • Protect critical networks with fiber Warranty Lifetime redundancy

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 31 For a Stand-Alone version, see STGFFxxxx-100 [ pg 63 ] CTGFFxxxx-100 Point System™ 10 Gigabit Ethernet Media Converter Module 10G Base-X to 10G Base-X

The Transition Networks’ 10 Gigabit Ethernet fiber to fiber converter is a two-port 10G pluggable media converter, supporting a variety of XFP and SFP+ modules allowing network designers to utilize the module to meet their Ordering Information network requirements. CTGFF4747-100 (2) Port 10GBase-xx open XFP The media converter can use either Transition Networks’ or third party MSA to Open XFP compatible 10G XFP or SFP+ modules including support for the following standards; 10GBase-SR, 10GBase-LR, 10GBase-ER, 10GBase-LRM, and CTGFF4848-100 10GBase-ZR. (2) Port 10GBase-xx open SFP+ to Open SFP+ This converter provides 3R (Reamplify, Reshape, and Retime) optical signal CTGFF4747-100 regeneration. Optional Accessories (sold separately)

SFP+ Modules Features Specifications TN-10GSFP-LR1 10GBase-LR/LW, SFP+ • Supports 10 Gigabit Ethernet Fiber to Standards IEEE 802.3ae IEEE 802.3ak w/ Digital Diagnostics (DMI) 1310 DFB nm Fiber full duplex conversion IEEE 802.3ag [10 km/6.2 mi.] Link Budget: 6.4 dB IEEE 802.3 • LED Link Status Indicators TN-10GSFP-LR2 IEEE 802.3x 10GBase-LR/LW, SFP+ • Link Pass Through Data Rate 10 Gbps w/ Digital Diagnostics (DMI) 1310 DFB nm [20 km/12.4 mi.] Link Budget: 11.4 dB • Auto Link Restore Status LED PWR (power): GREEN- power on 1LNK- fiber #1 link: GREEN- On link TN-10GSFP-LR4 10GBase-LR/LW, SFP+ • Loopback 1ACT- fiber #1 activity/fault: GREEN- BLINK activity, YELLOW- Fault w/ Digital Diagnostics (DMI) 1310 DFB nm [40 km/24.8 mi.] Link Budget: 16.5 dB • Supports +5V, +3.3V, and +1.8V MSA 2LNK- fiber #2 link: GREEN- On link 2ACT- fiber #2 activity/fault: GREEN- BLINK activity, TN-10GSFP-LR7 compliant XFP modules YELLOW- Fault 10GBase-LR/LW, SFP+ • Supports 3R (Reamplify, Reshape, and DIP Switches SW1- Port 1 mode w/ Digital Diagnostics (DMI) 1310 DFB nm Retime) optical signal regeneration UP: Limiting (xR); DOWN: Linear (LRM) [70 km/43.4 mi.] Link Budget: 25 dB SW2- Port 2 mode UP: Limiting (xR); DOWN: Linear (LRM) TN-10GSFP-SR • For use in all Point System™ Chassis’ 10GBase-LR/LW, SFP+ w/ Digital Diagnostics except for the 1-Slot Chassis SW3- LPT UP: Enabled DOWN: Disabled (DMI) 850 DFB nm SW4-Interface loopback, forces each fiber to loop its RX to TX [300/82/33 m; 985/269/108 ft.] • Manageable when installed in a Link Budget: 2.6 dB managed Point System™ Chassis Dimensions Width: 1.72” [44 mm] Depth: 5.0” [127 mm] XFP Modules • Supports 10GBase-Cx4 modules in the Height: 3.4” [86 mm] CTGFF4747-100 TN-XFP-SR Power Consumption 7 Watts 10GBase-SR/SW/10G Fibre Channel, XFP Environment See chassis specifications [pg 3-4] w/ Digital Diagnostics (DMI) 850nm (LC) [62.5/125 uM: 33 m/108 ft.] Weight 1 lb. [0.45 kg] [50/125 uM with 500 MHZ-km: 269 ft.] Compliance FCC Class A, EN55024 (CISPR22) [50/125 uM: 300 m/985 ft.] Class A; CE Mark; EN55022 Class A Modal dispersion 39.cB Warranty Lifetime TN-XFP-LR1 10GBase-LR/LW/10G Fibre Channel, XFP w/Digital Diagnostics (DMI) 1310nm (LC) [10 km/6.2 mi.] Link Budget: 6.2 dB TN-XFP-ER 10GBase-LR/ER/10G Fibre Channel, XFP w/ Digital Diagnostics (DMI) 1310nm (LC) Applications [40 km/24.9 mi.] Link Budget: 16.5 dB TN-XFP-ZR • Ideal for campus or business environments where remote devices can be 10GBase-LR/ER/10G Fibre Channel, XFP networked in a point to-point configuration and distances are greater than w/ Digital Diagnostics (DMI) 1550nm (LC) the 15 m limitation of conventional copper serial cables. [80 km/49.7 mi.] Link Budget: 23.0 dB

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 32 For a Stand-Alone version, see SRS2F311x-100 [ pg 70 ] CRS2F311x-100 Point System™ RS232 Remotely Managed Media Converter Module RS232 Copper to Fiber

Link a remote terminal to a host computer: Connect multiple devices, such as security scanners, POS devices, remote terminals and building access/alarming systems to a host computer. Ordering Information CRS2F3111-100 Transition Networks’ serial RS232 to fiber converters allow you to extend the DB-9 [15 m/49 ft.] distance between serial connections with the use of fiber optic cable. These to 1300nm multimode (ST) [2 km/1.2 mi.] full-featured converters transmit the full complement of RS232 flow control/ Link Budget: 11.0 dB handshaking signals optically and supports full or half-duplex asynchronous data transmission at speeds up to 115 Kbps. CRS2F3113-100 DB-9 [15 m/49 ft.] The diagnostic features included on these converters make installation easy to 1300nm multimode (SC) [2 km/1.2 mi.] and intuitive. A DTE/DCE switch eliminates the frustration over selecting the Link Budget: 11.0 dB appropriate cable. A Loopback switch allows for complete diagnostic testing CRS2F3113-100 CRS2F3114-100 prior to system turn-up or during troubleshooting. Unit and Port LEDs allow DB-9 [15 m/49 ft.] for quick status information of the device. to 1310nm single mode (SC) [20 km/12.4 mi.] Link Budget: 16.0 dB Features Specifications CRS2F3115-100 DB-9 [15 m/49 ft.] • Read/write access to remote Standards EIA/TIA-574 EIA/TIA RS-232E to 1310nm single mode (SC) stand-alone unit [40 km/24.9 mi.] Data Rate 115 Kbps Link Budget: 26.0 dB • Local or Remote Loopback on Switches DTE/DCE: Select appropriate position copper and fiber Loop-back: Norm = normal operation; Loop = Fiber and copper loop-back • DTE/DCE switch for easy installation with straight- Status LEDs P (Power): Lit for normal operation RX: Steady = Copper Link through cabling Flashing = Rx Data FL: Steady = Fiber Link • Full/Half-duplex asynchronous Flashing = Loop back mode transmission at speeds up to Dimensions Width: 0.86” [22 mm] 115 Kbps Depth: 5.0” [127 mm] • Supports the following flow Height: 3.4” [86 mm] control signaling: Power Consumption 5.0 Watts 1. DCD - Data Carrier Detect Environment See chassis specifications [pg 3-4] 2. RXD - Receive Data Weight 1 lb. [0.45 kg] 3. TXD - Transmit Data 4. DTR - Data Terminal Ready Compliance CISPR22/EN55022 Class A + EN55024, EN60950 Class A FCC Class A, CE Mark 5. SG - Signal Ground 6. DSR - Data Set Ready Warranty Lifetime 7. RTS - Request To Send 8. CTS - Clear To Send • Field Upgradeable Firmware Management Features • Report Converter status to Chassis management software: -Local Fiber Link status -Local/Remote -Hardware/Software mode -Local/Remote Loopback -Local/Remote DTE/DCE mode -Local/Remote link status • Write operation includes: -Local Loopback -Remote Loopback • Can be used with any Point System™ Chassis

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 33 For a Stand-Alone version, see SRS4F3x1x-100 [ pg 71 ] CRS4F3x1x-100 Point System™ RS422/485 Media Converter Module RS422/485 Copper to Fiber

Transition Networks’ serial RS-422/485 to Fiber Media Converter allows you to extend the distance between serial connections with the use of fiber optic cable. This full-featured converter operates in 2-wire mode for RS-422 and Ordering Information either 2-wire or 4-wire mode for RS-485 and supports full or half-duplex CRS4F3211-100 data transmission at speeds up to 1.25 Mbps. Terminal Block [1.2 km/0.7 mi.] to 1300nm multimode (ST) [2 km/1.2 mi.] Link a remote terminal to a host computer. Connect multiple devices, such Link Budget: 11.0 dB as security scanners, POS devices, remote terminals and building access/ alarming systems to a host computer. CRS4F3213-100 Terminal Block [1.2 km/0.7 mi.] to 1300nm multimode (SC) [2 km/1.2 mi.] Link Budget: 11.0 dB CRS4F3211-100 CRS4F3214-100 Terminal Block [1.2 km/0.7 mi.] to 1310nm single mode (SC) [20 km/12.4 mi.] Features Specifications Link Budget: 16.0 dB • RS422 or RS485 operation Standards EIA/TIA RS-422 EIA/TIA RS-485 • 2-wire or 4-wire in operation in Switches SW1: 130 ohm resistor Rx (Down = enable) RS-485 mode SW2: 130 ohm resistor Tx (Down = enable) SW3: 1k ohm “pull-down” (Down = enable) • Full/Half-duplex transmission SW4: 1k ohm “pull-up” (Down = enable) at speeds up to 1.25 Mbps SW5: 2-wire/4-wire (Down = 4-wire) SW6: RS-485/RS-422 (Down = RS-422) • Field Upgradeable Firmware Status LEDs PWR (Power): Lit for normal operation RXC: Steady = Data Rx on copper link; • Can be used with any Point System™ Flashing = Rx Data at low speed Chassis RXF: Steady = Fiber Link Dimensions Width: 0.86” [22 mm] Depth: 5.0” [127 mm] Height: 3.4” [86 mm] Management Features Power Consumption 5.0 Watts Environment See chassis specifications [pg 3-4] • Report Converter status to Chassis Weight 1 lb. [0.45 kg] management software: -Local Fiber Link status Compliance CISPR22/EN55022; EN55024; EN60950 Class A; -Receive data activity on the FCC Class A; CE Mark; UL 1950 copper link Warranty Lifetime -Local Switch settings -130 ohm resistor on RX -130 ohm resistor on TX -1K ohm “pull down” -1K ohm “pull up” -2-wire/4-wire operation Applications -RS-485/RS-422 operation Ideal for campus or business environments where remote devices can be networked in either a point-to-point or point to multi point configuration.

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 34 For a Stand-Alone version, see SPSVT26xx-10x [ pg 72 ] CPSVT26xx-10x Point System™ High Speed Serial Remotely Managed Media Converter Module V.35/X.21/RS449/RS530/RS232 Copper to Fiber

Management Features - Local/Remote Cable type Ordering Information • Report device status to chassis reporting, near end management software - Local/Remote Clock polarity CPSVT2613-100 - Local Fiber Link status setting 26-pin to 1300nm multimode (SC) [2 km/1.2 mi.] - Local/Remote Hardware/ Link Budget: 11.0 dB Software mode • Write operation includes: - Local/Remote Speed select - Local or Remote Loopback CPSVT2614-100 - Local or Remote Speed Select 26-pin - Local/Remote Loopback to 1310nm single mode (SC) [20 km/12.4 mi.] Link Budget: 16.0 dB

CPSVT2614-100 Single Fiber Products Features Specifications Recommended use in pairs CPSVT2629-100 • Connect High Speed Serial signals on Standards ITU-T 26-pin ISO-2593 copper to fiber to 1310nm TX/1550nm RX single fiber single mode (SC) [20 km/12.4 mi.] Data Rate 1.2 Kbps to 10 Mbps • Supports multiple protocols through the Link Budget: 19.0 dB Switches Side panel, external DCE speed switch, sixteen positions: use of a universal 26-pin serial interface Speeds can also be set on DCE converters locally or re CPSVT2629-101 26-pin connector motely via software.Front Panel, Loop-back to 1550nm TX/1310nm RX single fiber Selector Switch: Right Position: Loop Fiber Back & Loop • Extend the point of presence of a single mode (SC) [20 km/12.4 mi.] Copper Back Link Budget: 19.0 dB copper V.35/X.21/RS449/RS530/RS232 Left Position: Normal Operation connection at data rates up to 10 Mbps. Jumpers Jumper (J4): Hardware/Software mode • Supports Remote Management of a Jumper (J6): RX Clock Polarity: Set to sample the Cable Assemblies stand-alone Media Converter receive data on the rising or falling edge of the receive clock 21DCE-3 Jumper (J7): TX Clock Polarity: Set to sample the DB-15 (FT) (26-pin) to (DCE) [3 m/10 ft.] transmit data on the rising or falling edge of the receive clock • Copper & Fiber Loopback 21DTE-3 Status LEDs Smart Serial Link: Green - Link is up; DB-15 (MT) (26-pin) to (DTE) [3 m/10 ft.] • LED indications for Fiber Link, Green Flashing - In loop-back mode; 530DCE-3 Loopback & Data Fiber: Green - Link is up; DB-25 (FT) (26-pin) to (DCE) [3 m/10 ft.] Green Flashing - In loop-back mode; • Ability to use a combination of any PWR (Power): Green - ON power applied to board 530DTE-3 copper interface (RS449 to V.35, RS530 DB-25 (MT) (26-pin) to (DTE) [3 m/10 ft.] to X.21, DTE-DTE, DTE-DCE, DCE- Dimensions Width: 0.86” [22 mm] Depth: 5.0” [127 mm] Copper Distances DCE,etc.) Height: 3.4” [86 mm] Standard Range* • All interfaces converted at the Power Consumption 5.0 Watts RS232/V.24 15 m physical level Environment See chassis specifications [pg 3-4] RS449/V.36 1.2 km • Synchronous or asynchronous capability Weight 1 lb. [0.45 kg] V.35 600 m Compliance CISPR/EN55022, EN55024, EN60950 Class A; • Field Upgradeable Firmware X.21 1.2 km FCC Class A; CE Mark RS530 1.2 km Warranty Lifetime *For reference only. Contact Transition Networks for detailed range information.

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 35 For a Stand-Alone version, see SAPTF33xx-1xx [ pg 68 ] CAPTF33xx-1xx Point System™ POTS 2-Wire Media Converter Module POTS 2-Wire Copper to Fiber

Connect central-office voice grade signals to distant Plain Old Telephone equipment (POTS) utilizing standard telephone signaling. Two units are required to implement an end to end system. Unit A connects to a telephone line or PBX Ordering Information and has the ability to detect ringing voltages and to act as a telephone (LINE SIDE Line Side FXS: CAPTF3311-105 FXS). Unit B is the reciprocal unit and has the ability to act as a Central Office and Customer Side FXO: CAPTF3311-115 connects to a telephone device (CUSTOMER SIDE FXO). Twisted Pair (RJ-11) [5 km/3.1 mi.] to 1300nm multimode (ST) [2 km/1.2 mi.] Link Budget: 11.0 dB Line Side FXS: CAPTF3313-105 Customer Side FXO: CAPTF3313-115 Twisted Pair (RJ-11) [5 km/3.1 mi.] to 1300nm multimode (SC) [2 km/1.2 mi.] CAPTF3311-105 Link Budget: 11.0 dB Line Side FXS: CAPTF3314-105 Features Specifications Customer Side FXO: CAPTF3314-115 Twisted Pair (RJ-11) [5 km/3.1 mi.] • Audio transmission Standards FCC Part 68 to 1310nm single mode (SC) [20 km/12.4 mi.] TBR21 Link Budget: 16.0 dB • Caller ID Analog Port Connector: RJ-11(Telephone Emulation or FXS) Impedance: 600 ohms • Automatic Ring Down REN: 0.48 Loop Current: 20 to 60ma. Single Fiber Products • Dual or single fiber options Insertion Loss: 0.0 +/-1.0 dB at 1000 Hz Line Side FXS: CAPTF3329-105* when both ports are terminated at 600 ohms Customer Side FXO: CAPTF3329-115* • SNMP Management Analog Port Impedance: 600 ohms (Central Office) Twisted Pair (RJ-11) [5 km/3.1 mi.] • Ringing at the distant end to 1310nm TX/1550nm RX single fiber Emulation or FXO Battery Source: 48 VDC +/- 5V single mode (SC) Ringing Supply: 90Vp-p • Electrical interface is provided through [20 km/12.4 mi.] Ring Frequency: 25 Hz. Link Budget: 19.0 dB an RJ-11 female connector (Reproduces frequency detected by side A) Ring Cadence: Reproduces cadence Line Side FXS: CAPTF3329-106* • Field Upgradeable Firmware detected by side A Customer Side FXO: CAPTF3329-116* Insertion Loss: 1.0 +/- 1.0 dB @ 1000 Hz when Twisted Pair (RJ-11) [5 km/3.1 mi.] both ports are terminated at 600 ohms to 1550nm TX/1310nm RX single fiber single mode (SC) Voice Frequency 300 Hz – 3 KHz [20 km/12.4 mi.] Jumpers Automatic Ring Down/Normal Link Budget: 19.0 dB Status LEDs LED colors are Green SDF (Fiber Link): On indicates fiber link up; * Note: Single Fiber products should be ACT (In Use): On indicates unit in use; paired by application: Flashing indicates ringing; PWR (Power): On indicates power is on Loop Extender/Isolator Application Dimensions 105 Model: Height: 3.4” [86 mm] Depth: 5.0” [127 mm] Line Side FXS: CAPTF3329-105 Width: 0.86” [22 mm] Customer Side FXO: CAPTF3329-116 115 Model: Height: 3.4” [86 mm] Depth: 5.0” [127 mm] Width: 1.75” [43 mm] Power Consumption 105 Model: 4 Watts 115 Model: 7 Watts Environment See chassis specifications [pg 3-4] Weight 1 lb. [0.45 kg] Compliance Safety: CISPR A; CE Mark Emissions: FCC Class A; VCCI Class A; EN 55022 (CISPR 22) Class A; ICES 003 Warranty Lifetime

Note: CAPTF cards cannot be used with the 1-Slot Point System™ Chassis™ . Devices must be used in pairs. Typical installation will include a chassis card installed in the Point System™ locally and a stand-alone device installed at the remote location.

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 36 Stand-Alone Media Converters Offer Low-Density Solutions Deployed at the Network Edge or Remote Locations

• Point of Sale Retail Environments • Healthcare/Medical Facilities • Banking and Financial Institutions • Municipal and Utility Facilities

Connect Office and Retail Devices to a Fiber Network

Stand-Alone Network Camera Media Converter Work Station Stand-Alone Media Converter ION Chassis

Stand-Alone VoIP Phone Media Converter Stand-Alone Media Converter Point of Sale BACK OFFICE Register

Door Lock Stand-Alone Stand-Alone w/ Card Reader Media Converter Media Converter Bar Code Scanner Copper Switch

Features:

• Designed to be deployed at the network edge, linking back over fiber to another stand-alone converter or to a converter card in an ION chassis

• Supporting a wide variety of communication protocols

• Various versions supporting different levels of network management

• Converts back to copper at remote end of the fiber link

• Typically used in low-density deployments where only a few points of SSETF1011-205 conversion are required

37 E-MCR-05 12-Slot Media Converter Rack

Ordering Information Flexible Design for growing networks E-MCR-05 simplify your installation of Transition Networks’ 12-Slot Media Converter Rack

stand-alone media converters with the Media Optional Accessories (sold separately) Converter Rack. This 19” rack-mountable unit supports up to twelve media converters while the unique design allows for multiple connections, Mounting Options consolidated into a single device, making network connections easier and more efficient. RMBU Universal Rack Mount Bracket for Stand-Alone Converters • Space Saving Design: This device is powered by a single internal universal power supply; RMBM eliminating the need for the multiple power Rack Mount Bracket for Mini connections often associated with multiple (Media Converter Sold Seperately) Media Converters converter installations. The unit saves space in the wiring closet by providing a means for mounting (12) converters in (3) units of rack space while reducing the number of wall outlet 19” Rack-Mountable Chassis power connections required. Specifications Securely houses up to (12) stand- • Convenience: The media converters are hot- alone media converters with the swappable. They can also be removed from the Dimensions Width: 17.0” [432 mm] rack, powered externally, and used as stand- Depth: 15.0” [381 mm] use of universal converter mounting alone units in new applications as your network Height: 4.75” [121 mm] brackets needs change in the future. Power Supply Universal, internal power supply; One AC power source will inde- • Cost Effective: Easily rack mount the single- AC 85 – 264V, 47 – 63 Hz. pendently power up to (12) hot-swap- wide, 12 volt powered, Transition Networks’ Environment Operating: 0°C to 50°C, media converters that you already own, or buy Humidity : 10% to 90% (non-condensing), pable converters stand-alone units today and rack mount them Altitude: 0 – 10,000 ft. in the future. Supports any combination of single Weight 12 lbs. [5.2 kg] wide, 12 VDC powered, Transition • Includes: (12) Universal rack mount media converter brackets. Compliance UL Listed; C-UL Listed (Canada); CISPR/EN55022 Networks’ media converters Class A; FCC Class A; CE Mark Warranty Lifetime

RMS19-SA4-01 4-Slot Media Converter Shelf

• Space Saving Design Save rack space in low density deployments: Ordering Information 19” rack mount, 1RU high. RMS19-SA4-01 4-Slot Media Converter Shelf • Flexible Mix and match up to (4) Transition Networks RMS19-SA4-01-B stand-alone media converters (excluding 4-Slot Media Converter Shelf double-high models). with 3 Faceplate Blanks

• Non-Power Design Optional Accessories (sold separately) Don’t pay for power supplies twice. This low cost design allows the use of the power (Media Converters Sold Seperately) RMS19-B supplies that ship with the media converter. Faceplate Kit of 3 Blanks to cover up unused slots • Power Cord Tie-Downs Eliminates the accidental disconnection of power supplies from the media converters. Mounting Options • Converter Mounting Brackets Specifications RMBU Securely mounts the converters to the shelf. Dimensions Width: 17.0” [432 mm] Universal Rack Mount Bracket Depth: 6.0” [152 mm] for Stand-Alone Converters • Includes Universal rack mount media converter Height: 1.75” [44 mm] RMBM brackets. Weight 3 lbs. [1.35 kg] Rack Mount Bracket for Mini Media Converters • Optional Faceplate Blanks are available to Warranty Lifetime cover up unused slots. • Rackmount up to (4) stand-alone devices in (1) convenient un-powered shelf.

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 38 Wall, Rack, DIN-Rail Mounting Brackets

Wall Mount Brackets are small simple “L-shaped” tabs that allow a single Transition Networks’ media WMBL; WMBP; WMBS converter to be mounted anywhere. The brackets are Ordering Information sold in pairs and are available in several sizes and WMBD types to match the different sized media converters 5.0” [127 mm] DIN Rail Mount Bracket and space requirements. Fits all Stand-Alone Converters; Single or Dual Slot Point System™ Chassis Din Rail Brackets allow stand-alone media converters to be mounted to a Din Rail, common WMBD-E 4.3” [109 mm] DIN Rail Mount Bracket in industrial environments, in either a flat mount (Extended) Fits all Stand-Alone Converters with against the Din Rail or in a vertical mount in which piggyback power supply attached the converter mounts on its edge. WMBD-F Mini Wall Mount brackets allow a mini media 3.3” [84 mm] DIN Rail Mount Bracket (flat) converter to be securely mounted to a wall or any Fits all Stand-Alone Converters other flat surface. 3.25” [82 mm] wide WMBD-FS 3.1” [79 mm] DIN Rail Mount Bracket Specifications (flat, small) Fits Stand-Alone Converters 3.0” [76 mm] wide Weight 1 lb. [0.45 kg] WMBJ-V Warranty Lifetime 2.75” [70 mm] Wall mount bracket kit for Ana- log Video products including: J/VD-TX-01xx WMBV; WMBD J/VD-MRX-01xx WMBL 4.0” [102 mm] Fits Stand-Alone Converters size 4.7” [119 mm] WMBM RMBM 3.3” [84 mm] Fits all “Mini” Media Converters WMBP 5.0” [127 mm] Fits Single or Dual Slot Point System™ Chassis WMBS 3.2” [81 mm] Fits Stand-Alone Converters size 3.9” [99 mm] WMBV 5.0” [127 mm] Vertical Mount Fits all Stand-Alone Converters; Single or Dual Slot Point System™ Chassis WMBV-E 4.7” [119 mm] WMBM Extended Vertical Mount Fits all Stand-Alone Converters with piggyback power supply attached RMBU RMBM Rackmount bracket for mini converters, used with E-mcr-05 and RMS19-SA4-01 RMBU Rackmount bracket for stand-alone converters, used with E-MCR-05 and RMS19-SA4-01

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 39 SPS-2460-xx External DC Power Supply For Stan-alone Media Converters

Transition Networks’ wide input external power supplies allow you to provide a wide range of input voltages to power your stand-alone converters and chassis. Input voltages of 24 – 60 VDC and 24 – 42VRMS allow for Ordering Information installation of any of Transition Networks’ stand-alone media converters in SPS-2460-PS most industrial, telecom and commercial applications, as well as HVAC and Piggy-Back building controlled environments. For use with: Point System™ stand-alone media converters 3.25” wide Multiple form factors allow flexibility to meet your application. The stand- (SBFTF1011-100; SGETF1013-100, etc.) alone form factor can be used with all Transition Networks’ stand-alone SPS-2460-SA SPS-2460-SA media converters as well as the single-slot and dual-slot Point System™ Stand-Alone Chassis. The piggy back form factor allows the power supply to attach Stand-Alone Power Supply For use with: All stand-alone media directly to the converter and eliminate the power cable commonly found converters; Single-Slot Point System™ between the power supply and the converter. Once the piggy back supply Chassis; Dual-Slot Point System™ Chassis is attached to the converter, the combined assembly is much easier to wall mount or attach to Din Rail environments than using a separate supply.

Specifications Input Voltage 24 – 60 VDC; 24 – 42VMRS Isolation Voltage (Dielectric withstand) Meets IEC 950 for one minute 1500 VAC: Output/Input 1500 VAC: Input/Safety GND 1500 VAC: Output/CASE Output Voltage 12.25 VDC Output Current 1.0A SPS-2460-PS Load Regulation ±5% at 10% load to full rated load Piggy-Back Power Supply Over Load Protection(OLP) When the average power rating exceeds 125%-150% of maximum power, output voltages reduced to a safe dissipation level; protects against short circuit of any output No Load Protection No damage to power supply when Operating at no load Transient Protection No voltage spike at power-on, power-off, or power failure Power Distribution : +12.25 VDC at 1.0A maximum Consumption: 3 Watts max. @ 24 VDC input, 12.25 VDC output Efficiency 80% (typical) Noise and Ripple ±40 mV peak-to-peak of output voltage (typical) MTBF Greater than 250,000 hours with typical load Operating at 25°C temperature (calculated according to MIL-HDBK-217E) Compliance CISPR/EN55022; Class A; FCC Class A Dimensions SPS-2460-SA:Width: 3.75” [95 mm] Depth: 3.1” [79 mm] Height: 1.0” [25 mm]

SPS-2460-CC: Width: 4.5” [114 mm] Depth: 3.1” [79 mm] Height: 1.0” [25 mm]

SPS-2460-PS: Width: 4.5” [114 mm] Depth: 3.4” [86 mm] Height: 1.0” [25 mm] Weight 1 lb. [0.45 kg] Environment Operating: -20°C to 65°C Storage: -40°C to 85°C Humidity: 5 – 95% (non-condensing) Altitude: 0 – 10,000 ft. Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 40 J/E-CX-TBT-02 Stand-alone Ethernet Media Converter 10Base-2 to 10Base-T

Ordering Information J/E-CX-TBT-02 10BASE-T (RJ-45) [100 m/328 ft.] to 10BASE2 (BNC) [185 m/607 ft.]

J/E-CX-TBT-02

Features Specifications • Protects your equipment investment by Standards IEEE 802.3, 10BASE-T, allowing you to upgrade-not replace- 10BASE2 your current network. Switches MDI/MDI-X: Selects correct RJ-45 port setting • Provides (1) RJ-45 twisted pair Status LEDs PWR (Power): ON = Connected to external power connector and (1) BNC 10BASE2 BNC/ACT (BNC Activity): Flashing = 10BASE2 compliant port. data traffic TP/ACT (TP Activity): ON = 10BASE-T link • Supports up to (24) devices daisy- connection; Flashing = 10BASE-T data traffic chained on (1) coax segment per twisted COL (Collision): Flashing = Collision present pair segment. Dimensions Width: 2.75” [71 mm] Depth: 3.7” [94 mm] • MDI/MDI-X selection switch allows Height: 1.0” [25 mm] converter to be connected to either a Power External AC/DC: 5 VDC, 1.0 A workstation/NIC or hub, switches and Environment Operating: 0°C to 50°C routers without changing the cable type. Humidity: 5% to 90% (non-condensing), Altitude: 0 – 10,000 ft. • BNC T-connector included for daisy chain applications. Weight 2 lbs. [0.90 kg] Safety Compliance Wall Mount Power Supply: Note: not rack-mountable UL Listed and CSA certified Compliance CISPR22/EN55022 Class A, FCC Class A, CE Mark Warranty Lifetime

Application • Connect legacy coax devices to a 10BASE-T network

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 41 For a Chassis Card version, see CETTF10xx-x0x [ pg 26 ] E-TBT-FRL-05(xx) Stand-alone Ethernet Media Converter 10Base-T to 10Base-FL

Ordering Information E-TBT-FRL-05 10BASE-T (RJ-45) [100 m/328 ft.] to 10BASE-FL 850nm multimode (ST) [2 km/1.2 mi.] Link Budget: 13.5 dB E-TBT-FRL-05(SC) 10BASE-T (RJ-45) [100 m/328 ft.] to 10BASE-FL 850nm multimode (SC) [2 km/1.2 mi.] Link Budget: 13.5 dB E-TBT-FRL-05(L) E-TBT-FRL-05 10BASE-T (RJ-45) [100 m/328 ft.] to 10BASE-FL 1300nm MM (ST) Features Specifications [5 km/3.1 mi.] Link Budget: 13.5 dB E-TBT-FRL-05(SM) Standards IEEE 802.3 • Auto-MDI/MDIX 10BASE-T (RJ-45) [100 m/328 ft.] 10BASE-T, to 10BASE-FL 1310nm SM (ST) 10BASE-FL • Link Pass Through [20 km/12.4 mi.] Link Budget: 7.0 dB Switch S1: Enables/disables Link Pass Through • Automatic Link Restoration E-TBT-FRL-05(XC) Status LEDs PWR (Power): ON = connection to external 10BASE-T (RJ-45) [100 m/328 ft.] • Integrate mixed cabling environments AC power to 10BASE-FL 1310nm single mode (SC) using either switched or shared Ethernet Link: ON = unit is receiving link pulses from [20 km/12.4 mi.] Link Budget: 7.0 dB a compliant device RX (Receive): ON = packets are being received E-TBT-FRL-05(LH) 10BASE-T (RJ-45) [100 m/328 ft.] Dimensions Width: 3.0” [76 mm] to 10BASE-FL 1310nm single mode (ST) Extend Network Distance Depth: 3.9” [99 mm] [40 km/24.9 mi.] Link Budget: 19.0 dB (2) 10BASE-T to 10BASE-FL Media Height: 1.0” [25 mm] Converters used back-to-back extend the Power External AC/DC required; 12 VDC, 0.5A, unregulated, standard distance between (2) 10BASE-T devices up Optional Accessories (sold separately) to 5 km (3.1 mi.) using multimode fiber or Environment Operating: 0°C to 50°C Humidity: 5% to 90% (non-condensing), up to 40 km (24.9 mi.) using single mode Altitude: 0 – 10,000 ft. fiber without a repeater. Weight 2 lbs. [0.90 kg] Wide Input (24 - 60 VDC) Power Supplies Compliance Safety: Wall Mount Power Supply: SPS-2460-SA UL Listed, C-UL Listed (Canada) Stand-Alone Power Supply Connect Unlike Devices Regulatory: FCC Class A, CISPR22/EN55022 Connect your workgroup to a distant server Class A, EN55024, EN61000, CE Mark or a central switch; or extend distances Mounting Options between like and unlike devices in either Warranty Lifetime full or half-duplex modes. E-MCR-05 12-Slot Media Converter Rack RMS19-SA4-01 4-Slot Media Converter Shelf WMBD DIN Rail Bracket 5.0” [127 mm] WMBD-FS DIN Rail Bracket (flat, small) 3.1” [79 mm] WMBS Wall Mount Bracket 3.2” [81 mm] WMBV Vertical Wall Mount Bracket 5.0” [127 mm]

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 42 E-TBT-MC05 Stand-alone Ethernet Transceiver 10Base-5 AUI to 10Base-T RJ45

This Attachment Unit Interface (AUI) transceiver provides a method for connecting a workstation, or any other device with an AUI port, to twisted pair cabling in a 10BASE-T network. Devices with AUI ports could include: Ordering Information servers, hubs, bridges and routers. The E-TBT-MC05 transceiver allows E-TBT-MC05 twisted pair, UTP or STP, to be connected to these AUI ports. 10BASE5 (AUI) dB-15 male [50 m/164 ft.] to 10BASE-T (RJ-45) [100 m/328 ft.]

E-TBT-MC05

Features Specifications • Provides a complete interface of the AUI Standards IEEE 802.3, 10BASE-T to Ethernet UTP cable Status LEDs COL: Blinks when detecting collisions • Supports data transfer rate of 10 Mbps STAT: Solid Grveen: UTP Link established; Blinks Green: No UTP Link; 4-Blink Pattern: Polarity • CSMA/CD access mechanism reversal detected on UTP cable TX: Blinks when transmitting data on the RJ-45 • Capable of driving the UTP cable RX: Blinks when receiving data on the RJ-45 segment up to 100 m (328 ft.) without Switches SW1: SQE Test: UP is enabled the use of a repeater SW2: Link Test: UP is enabled SW3: Half or Full-Duplex: UP is for Half, Down is for Full • Selectable Link test and SQE test Dimensions Width: 3.1” [79 mm] functions Depth: 0.8” [20 mm] • AUI locking post design allows the Height: 1.7” [43 mm] E-TBT-MC05 to directly attach to a Power No external power required host’s AUI connector Input Voltage 10.2 to 15.75 VDC • Can be used with or without an AUI Input Current 250mA@12 VDC cable Power Consumption Not to exceed 75mA@12 VDC • LED indicators for network monitoring Environment Operating: 0°C to 50°C, Humidity: 5% to 95% (non-condensing), and diagnosing Altitude: 0 – 10,000 ft. • The RJ-45 port will automatically detect Weight 1 lb. [0.45 kg] and reverse the polarity on the receive Compliance FCC & CISPR Class A, CE Mark pair, if needed Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 43 For a Chassis Card version, see CSEFE10xx-100x [ pg 27 ] SSEFE10xx-100x Stand-alone Speed Selectable Media Converter 10Base-T to 10Base-FL or 100Base-TX to 100Base-FX

Transition Networks’ speed selectable copper to fiber Media Converter allows you to extend the distance between copper based connections with the use of fiber optic cable. The ability to select the speed of converter allows for Ordering Information easy migration from a 10 Mbps network today to a 100 Mbps network in the SSEFE1014-100 future. This converter is a true layer 1 device as both the copper and fiber 10BASE-T or 100BASE-TX (RJ-45) ports operate at the same speed setting (i.e. 100BASE-TX to 100BASE-FX). [100 m/328 ft.] For 10 Mbps applications, these devices must be used in pairs. to 10BASE or 100BASE 1310nm SM (SC) [20 km/12.4 mi.] Link Budget: 17.0 dB

SSEFE1014-100 Optional Accessories (sold separately)

Wide Input (24 - 60 VDC) Power Supplies SPS-2460-PS Features Specifications Piggy Back Power Supply • Auto-MDI/MDIX Standards IEEE Std. 802.3 SPS-2460-SA Switches Switch 1: Link Pass Through on/off Stand-Alone Power Supply • Link Pass Through IEEE 2: 10 Mb or 100 Mb operation • Automatic Link Restoration Status LEDs * PWR (Power): Lit for normal operation Mounting Options F-ACT: Blinking = data reception on the fiber link E-MCR-05 F-100: ON = link at 100 Mb 12-Slot Media Converter Rack F-10: ON = link at 10 Mb C-ACT: Blinking = data reception on the copper link RMS19-SA4-01 -100 (Copper Speed): ON = link at 100 Mb 4-Slot Media Converter Shelf C-10 (Copper Speed): ON = link at 10 Mb WMBD Dimensions Width: 3.25” [82 mm] DIN Rail Bracket 5.0” [127 mm] Depth: 4.8” [122 mm] Height: 1.0” [25 mm] WMBD-E DIN Rail Bracket (Extended) 4.3”[109 mm] Power Consumption 3.6 Watts WMBD-F Power External AC/DC required; 12 VDC, 0.5A; unregulated; DIN Rail Bracket (flat) 3.3” [84 mm] standard (provided) WMBL Environment Operating : 0°C to 50°C Wall Mount Bracket 4.0” [102 mm] Humidity : 5% to 95% (non-condensing) Altitude : 0 – 10,000 ft. WMBV Weight 2 lbs. [0.90 kg] Vertical Wall Mount Bracket 5.0” [127 mm] Safety Compliance Wall Mount Power Supply: WMBV-E UL Listed; C-UL Listed (Canada) Extended Vertical Mount 4.7” [119 mm] Compliance CISPR/EN55022 Class A; EN55024; EN60950 Class A; FCC Class A; CE Mark Warranty Lifetime

Applications: • Selectable Speed Setting The converter can be set to 10 Mbps or 100 Mbps. Both copper and fiber ports are automatically set to the same speed. • Ethernet Use the 10BASE-T to 10BASE-FL speed setting (back-to-back) to extend the distance between two 10BASE-T devices up to 40 km (24.9 mi.) using single mode fiber without a repeater. • Fast Ethernet Use the 100BASE-TX to 100BASE-FX setting to extend the distance between any two 100BASE-TX devices up to 40 km (24.9 mi.) using single mode fiber. Or interface directly with a 100BASE-FX compliant port on any device to provide a 100BASE-TX port interface.

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 44 For a Chassis Card version, see C2110 Series [ pg 9 ] E-100BTX-FX-05(xxxx) Stand-alone Fast Ethernet Media Converter 100Base-TX to 100Base-FX

Applications • Extend Network Distance Used in pairs, this media converter can extend distances between two twisted pair switches or a switch and a server up to 2 km over multimode fiber or up to 80 km over single mode fiber.

• Connect Remote Devices Using one media converter, a switch with a copper port can be connected to a switch with an existing fiber interface. E-100BTX-FX-05 The converters will automatically re-establish link when connected to two 10/100 auto-negotiating switches, after the fault condition has been corrected. With other Features manufacturers’ converters the user must intervene to re-establish link. • Operates under heavy traffic loads without excess heat, so there is no need for a failure-prone internal fan • Round trip delay of only 40 bit times - far below the Class II rating of 92 bit Ordering Information times E-100BTX-FX-05 Single Fiber Products 100BASE-TX (RJ-45) [100 m/328 ft.] • Auto-Negotiation E-100BTX-FX-05(100) to 100BASE-FX 1300nm MM (ST) [2 km/1.2 mi.] 100BASE-TX (RJ-45) [100 m/328 ft.] Link Budget: 11.0 dB to 100BASE-FX 1310nm TX/1550nm RX • Auto-MDI/MDIX E-100BTX-FX-05(SC) single fiber single mode (SC) [20 km/12.4 mi.] • Link Pass Through 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm multimode (SC) [2 Link Budget: 19.0 dB • Far-End-Fault (FEF) (FEF) km/1.2 mi.] E-100BTX-FX-05(101) Link Budget: 11.0 dB 100BASE-TX (RJ-45) [100 m/328 ft.] • Pause E-100BTX-FX-05(LC) to 100BASE-FX 1550nm TX/1310nm RX 100BASE-TX (RJ-45) [100 m/328 ft.] single fiber single mode (SC) [20 km/12.4 mi.] • Automatic Link Restoration to 100BASE-FX 1300nm multimode (LC) [2 Link Budget: 19.0 dB km/1.2 mi.] E-100BTX-FX-05(102) Link Budget: 11.0 dB 100BASE-TX (RJ-45) [100 m/328 ft.] E-100BTX-FX-05(MT) to 100BASE-FX 1310nm TX/1550nm RX Specifications 100BASE-TX (RJ-45) [100 m/328 ft.] single fiber single mode (SC) [40 km/24.9 mi.] Link Budget: 25.0 dB Standards IEEE 802.3, to 100BASE-FX 1300nm MM (MT-RJ) [2 km/1.2 mi.] 100BASE-FX, E-100BTX-FX-05(103) Link Budget: 14.5 dB 100BASE-TX 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1550nm TX/1310nm RX Switches SW1: Auto-Negotiation On/Off E-100BTX-FX-05(SM) 100BASE-TX (RJ-45) [100 m/328 ft.] single fiber single mode (SC) [40 km/24.9 mi.] SW2: Pause TX On/Off Link Budget: 25.0 dB SW3: Link Pass Through On/Off to 100BASE-FX 1310nm SM (SC) [20 km/12.4 SW4: Far-End-Fault (FEF) On/Off mi.] Link Budget: 16.0 dB Jumpers Jumper Block 1: Auto-MDI/MDIX enable Optional Accessories (sold separately) E-100BTX-FX-05(SMLC) Status LEDs PWR (Power) 100BASE-TX (RJ-45) [100 m/328 ft.] SDF or LKF (Link Fiber) to 100BASE-FX 1310nm SM (LC) [20 km/12.4 Wide Input (24 - 60 VDC) Power Supplies SDC or LKC (Link Copper) mi.] SPS-2460-SA RXF (Receive Fiber) Link Budget: 17.3 dB RXC (Receive Copper) Stand-Alone Power Supply E-100BTX-FX-05(LH) Dimensions Width: 3.0” [76 mm] 100BASE-TX (RJ-45) [100 m/328 ft.] Depth: 4.7” [119 mm] to 100BASE-FX 1310nm SM (SC) Mounting Options Height: 1.0” [25 mm] [40 km/24.9 mi.] E-MCR-05 Power External AC/DC required: 12 VDC, Link Budget: 26.0 dB 12-Slot Media Converter Rack 0.5 A, unregulated, standard E-100BTX-FX-05(XL) RMS19-SA4-01 Environment Operating: 0°C to 50°C, 100BASE-TX (RJ-45) [100 m/328 ft.] 4-Slot Media Converter Shelf Humidity : 5% to 95% (non-condensing) to 100BASE-FX 1310nm SM (SC) [60 km/37.3 Altitude : 0 – 10,000 ft. mi.] WMBD Link Budget: 29.0 dB DIN Rail Bracket 5.0” [127 mm] Weight 2 lbs. [0.90 kg] E-100BTX-FX-05(LW) WMBD-FS Compliance Safety : Wall Mount Power Supply: DIN Rail Bracket (flat, small) 3.1” [79 mm] UL Listed and CSA certified 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1550nm SM (SC) [80 km/49.7 Regulatory: FCC Class A, EN55024, EN55022 Class A, WMBL mi.] EN61000, CE Mark Wall Mount Bracket 4.0” [102 mm] Link Budget: 29.0 dB Warranty Lifetime WMBV Vertical Wall Mount Bracket 5.0” [127 mm]

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 45 For a Chassis Card version, see C3100 Series [ pg 12 ] F-SM-MM-02 & SFMFF1xxx-20x Stand-alone Fiber to Fiber Media Converter Fiber to Fiber for Data Rates from 100Mbps to 155Mbps

Ordering Information SFMFF1313-200 1300nm multimode (SC) [2 km/1.2 mi.] Link Budget: 11.0 dB to 1300nm multimode (SC) [2 km/1.2 mi.] Link Budget: 11.0 dB F-SM-MM-02 1300nm multimode (SC) [2 km/1.2 mi.] Link Budget: 11.0 dB to 1310nm single mode (SC) [20 km/12.4 mi.] F-SM-MM-02 Link Budget: 16.0 dB

Features Extend Network Distance Optional Accessories (sold separately) Extend distances up to 20 km with network protocols that use • Link Pass Through 1300nm wavelength for fiber optic transmission. In fact, distances can be extended in any networking protocol between 100 Mbps and • Automatic Link Restoration 155 Mbps. F-SM-MM-02: Save money by purchasing Fast Ethernet devices with lower cost multimode SPS-2460-SA Wide Input (24 - 60 VDC) Piggy Back Power Sup- fiber interfaces and use converters to introduce single mode fiber only where ply for the F-SM-MM-02 you need it. WMBD-FS DIN Rail Bracket (flat, small) 3.1” [79 mm] Specifications Standards IEEE 802.3 SFMFF1x29-20x: Status LEDs PWR (Power): Steady green LED indicates SPS-2460-PS connection to external AC power Wide Input (24 - 60 VDC) Piggy Back Power Sup- LKM or Link (Left): Lit for MM Link ply for the SFMSS1xxx-20x LKS or Link (Right): Lit for SM Link WMBD-F Dimensions Width: 3.0” [76 mm] DIN Rail Bracket (flat) 3.3” [84 mm] Depth: 4.7” [119 mm] Height: 1.0” [25 mm] F-SM-MM-02 or SFMFF1x29-20x: Power External AC/DC required; 12 VDC. 0.5A; unregulated; standard SPS-2460-SA Environment Operating: 0°C to 50°C, Wide Input (24 - 60 VDC) Stand-Alone Power Humidity : 5% to 95% (non-condensing) Supply Altitude : 0 – 10,000 ft. E-MCR-05 Weight 2 lbs. [0.90 kg] 12-Slot Media Converter Rack Safety Compliance Wall Mount Power Supply: RMS19-SA4-01 UL Listed and CSA certified 4-Slot Media Converter Shelf Compliance CISPR/EN55022 Class A; EN55024; EN61000; FCC WMBD Class A; CE Mark DIN Rail Bracket 5.0” [127 mm] Warranty Lifetime WMBL Wall Mount Bracket 4.0” [102 mm] WMBV Vertical Wall Mount Bracket 5.0” [127 mm]

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 46 SFEPE101x-1x0 Stand-alone Fast Ethernet PoE Media Converter 100Base-T PoE PSE to 100Base-FX

Transition’s AC or DC powered PoE media converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also Ordering Information include a PD signature sensing and power monitoring Features per the SFEPE1011-100: AC Powered PSE IEEE 802.3af standard. SFEPE1011-110: DC Powered PSE 100BASE-TX (RJ-45) [100 m/328 ft.] SFEPE10xx-1xx products can operate in two modes: IEEE 802.3af mode to 100BASE-FX 1300nm multimode (ST) [2 as well as “legacy mode”. In the IEEE 802.3af mode the PoE is fully km/1.2 mi.] compatible with devices that comply with the IEEE 802.3af standard. The Link Budget: 11.0 dB SFEPE1013-100 PoE converter is also capable of inserting power on either the spare pairs SFEPE1013-100: AC Powered PSE or data pairs of the MDI. SFEPE1013-110: DC Powered PSE In the “legacy mode” PoE can be configured for reverse polarity, 12 VDC, 100BASE-TX (RJ-45) [100 m/328 ft.] 24 VDC, or 48 VDC power insertion; as well as for other non-IEEE 802.3af to 100BASE-FX 1300nm multimode (SC) [2 compatible PDs. km/1.2 mi.] Link Budget: 11.0 dB Different voltages & modes are switch selectable. SFEPE1014-100: AC Powered PSE SFEPE1014-110: DC Powered PSE 100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1310nm SM (SC) [20 km/12.4 Features Specifications mi.] • Internal AC or DC power supply Link Budget: 16.0 dB

• IEEE 802.3af Power-Over-Ethernet Standards IEEE 802.3 Optional Accessories (sold separately) IEEE 802.3af Compatible Mode Switches 1&2: Set voltage output on twisted pair Mounting Options • Legacy Mode (Non IEEE 802.3af) 3: IEEE 802.3af mode/Legacy mode 4: Voltage polarity WMBD-P • 12, 24, or 48 VDC PSE Output Voltage 5: MDI power on signal pairs/spare pairs DIN Rail Mount Bracket POE with Reverse Polarity Selection 6:Enable/disable Auto-negotiation 7:Enable/disable Pause WMBL • Signal Pair and Spare Pair Power 8:Enable/disable Link Pass Through Wall Mount Bracket 4.0” [102 mm] Insertion 9:Enable/disable Far-End-Fault (FEF) 10: Enable/disable Auto-MDI/MDIX • Over-Current Protection Status LEDs PWR (power): Lit for normal operation MDI Fault: ON = over-current detected • Under-Current Detection MDI ON: ON = MDI port supplying power TX Link: ON = Link on copper port • Minimum Load Sensing TX Act: Flashing = data activity on copper link FX Link: ON = Link on fiber port • Fault Protection Input FX Act: Flashing = data activity on fiber link • Exceeds IEEE 802.3af ripple Dimensions Width: 7.3” [185 mm] requirements on PSE MDI power leads Depth: 4.4” [112 mm] Height: 1.2” [30 mm] • Max 16.8 Watts Power output capacity Power Models SFEPE10xx-100: 90 – 250 VAC Internal at legacy 48 VDC (Power Cord Supplied) Models SFEPE10xx-110: 18 – 60 VDC; • PSE MDI Power Enable/Disable 24 – 48 VAC Internal • Auto-Negotiation Power Consumption 45 Watts Max Environment Operating: 0°C to 50°C • Auto-MDI/MDIX Storage: -25°C to 85°C Humidity: 5 – 95% (non-condensing) • Link Pass Through Altitude: 0 – 10,000 ft. • Far-End-Fault (FEF) (FEF) Weight 2 lbs. [0.90 kg] Compliance EN55022:1994+A1:1996+A2:1997 Class A; FCC • Automatic Link Restoration Part 15 Subpart B; UL 1950 • Pause Warranty Lifetime

Applications • Enables enterprises to provide power to network devices over the existing CAT5 data connection. • Combine data received over a fiber optic link with -48 VDC power; providing power to Data Terminal Equipment (DTE); Power Devices (PD) over unshielded twisted pair cable

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 47 For a Chassis Card version, see CSETF101x-205 [ pg 28 ] SSETF101x-205 Stand-alone Fast Ethernet Media Converter 10/100BASE-TX to 10/100BASE-SX

Ordering Information SSETF1011-205 10/100BASE-TX (RJ-45) [60 m/197 ft.] to 10/100BASE-SX 850nm multimode (ST) [300 m/984 ft.] SSETF1013-205 10/100BASE-TX (RJ-45) [60 m/197 ft.] to 10/100BASE-SX 850nm multimode (SC) [300 m/984 ft.]

SSETF1011-205 Optional Accessories (sold separately)

Features Specifications Wide Input (18 – 72VDC) Power Supplies Operation Operates as TIA SP4360A Type I, II device SPS-2460-PS • Auto-Negotiation Piggy Back Power Supply Standards IEEE 802.3 • Auto-MDI/MDIX 100BASE-TX SPS-2460-SA 10BASE-FL Stand-Alone Power Supply • Link Pass Through Draft TIA 100BASE-SX-SP-4360A • Efficient and Reliable The 10/100 SX Recommended Optic 62.5/125 µm multimode fiber; 50/125 µm Mounting Options Media Converter operates easily under Cablemultimode fiber heavy traffic loads without generating E-MCR-05 Optional Optic Cable 100/140 µm multimode fiber; 85/125 µm multimode fiber 12-Slot Media Converter Rack excess heat; meaning a failure-prone Status LEDs PWR (Power): ON = Connection to the external AC or DC power internal fan is unnecessary RMS19-SA4-01 SX-ACT (Fiber Activity): Flashing = Data reception 4-Slot Media Converter Shelf • Automatic Link Restoration on the fiber link SX-100 (Fiber Speed): ON = Fiber link at 100 Mbps WMBD SX-10 (Fiber Speed): ON = Fiber link at 10 Mbps DIN Rail Bracket 5.0” [127 mm] TX-ACT (Copper Activity): Flashing = Data reception WMBD-E on the copper link DIN Rail Bracket (extended) 4.3” [109 mm] TX-100 (Copper Speed): ON = Copper link at 100 Mbps TX-10 (Copper Speed): ON = Copper link at 10 Mbps WMBD-F DIN Rail Bracket (flat) 3.3” [84 mm] Dimensions Width: 3.25” [82 mm] Applications: Depth: 4.8” [122 mm] WMBL Height: 1.0” [25 mm] Wall Mount Bracket 4.0” [102 mm] • Extend Network Distance Power External: AC/DC required; 12V DC. 0.5A; unregulated; standard WMBV Used in pairs, this media converter can Vertical Wall Mount Bracket 5.0” [127 mm] extend distances between two twisted Environment Operating: 0°C to 50°C pair switches or a switch and a server Humidity : 5% to 90% (non-condensing) WMBV-E Altitude: 0 – 10,000 ft. Vertical Wall Mount Bracket (extended) up to 300 m over multimode fiber 4.7” [119 mm] (100BASE-SX). Weight 2 lbs. [0.90 kg] Compliance Safety : Wall Mount Power Supply: UL listed and CSA certified • Connect Remote Devices Regulatory: FCC Class A, CISPR/EN55022 Class A, CE Mark Using a single 10/100BASE-SX media converter, a switch with a copper port Warranty Lifetime can be connected to a switch or any other 10/100BASE-SX compliant device with an existing fiber interface. • Low cost solution for fiber installation up to 300 m (100BASE-SX) • Ideal for building backbone and horizontal cabling applications where cost and 10/100 auto-negotiation are critical.

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 48 For a Chassis Card version, see CBFTF1010-130 [ pg 29 ] SBFTF1010-130 Stand-alone Fault-Tolerant Redundant Link Protector 10/100Base-TX

The Redundant Link Protector is a 10/100 Ethernet fault-tolerant transceiver. It significantly reduces network downtime, adding a new level of redundancy to 10/100 Ethernet connections. It also provides a redundant path for critical Ordering Information 10/100 devices. In a 10/100 Ethernet network, a critical device such as SBFTF1010-130 a file server may be connected to the rest of the network through a hub 10/100BASE-TX Link Protector Transceiver or a switch. A common problem in this configuration is that the server is (3) 10/100BASE-TX (RJ-45) [100 m/328 ft.] often connected to the network through a single cable. If the cable fails, then the server is disconnected from the rest of the network. Similarly, if a port of a hub or switch to which the server is connected fails, the server is Optional Accessories (sold separately) disconnected from the network. The Redundant Transceiver has three ports: one for the critical (main) device, Wide Input (24 - 60 VDC) Power Supplies one for the default (primary) path for the critical device, and another (backup) SPS-2460-PS SBFTF1010-130 for the backup path. It is a smart device that will not send any signal on a Piggy Back Power Supply path that is inactive. If the primary path loses its link, then the transceiver will switch to the backup path in approximately 189 milliseconds. SPS-2460-SA Stand-Alone Power Supply When the primary path re-establishes its link, the Redundant Link Protector will automatically switch back to the primary path. Mounting Options Optional functionality, controlled via a dip switch, allows the unit to move E-MCR-05 from the fault-tolerant mode to a 3-port switch mode. 12-Slot Media Converter Rack RMS19-SA4-01 4-Slot Media Converter Shelf Features Specifications WMBD DIN Rail Bracket 5.0” [127 mm] Standards IEEE 802.3 • Fault-tolerant redundant connections WMBD-F RJ-45 Connectors Type: 8-position, RJ-45 receptacle: DIN Rail Bracket (flat) 3.3” [84 mm] • Easy to install and use 1: TX+5: NC (no connection) 2: TX-6: RX- WMBL • Supports half and full-duplex 3: RX+7: NC (no connection) Wall Mount Bracket 4.0” [102 mm] transmission 4: NC (no connection) WMBV 8: NC (no connection) • Auto-MDI/MDIX Auto-Negotiation Vertical Wall Mount Bracket 5.0” [127 mm] Dip Switches SW1: Auto-Negotiation Enable/Disable • IEEE 802.3 compliant SW2: 10/100 Mbps SW3: Full/Half Duplex • Nine diagnostic LEDs SW4: Redundancy/Switch System LEDs Power (PWR): Indicates the presence of POWER • Optional 3-port switch mode Primary (PRI): Indicates a link is established on the Primary port Backup (BKP): Indicates the link has moved over to the Backup port Per Port LEDs Lower Right: Green indicates 100 Mbps; Orange indicates 10 Mbps; Flashing indicates Activity Lower Left: Green indicates full-duplex; Off half-duplex Dimensions Width: 3.25” [82 mm] Depth: 4.8” [122 mm] Height: 1.0” [25 mm] Power Domestic Input: 120 VAC @ 60 Hz. Output: 12 VDC, 0.5 Amp International Input: 100 – 240 VAC @ 50 Hz. Output: 12 VDC, 1.25 Amp Environment: Operating: 0°C to 50°C Storage: -15°C to 65°C Humidity: 5% to 95% Altitude: 0 – 10,000 ft. Weight 2 lbs. [0.90 kg] Safety Compliance Wall Mount Power Supply: UL Listed & CSA Certified Compliance Regulatory: FCC Class A, EN55024, UL 60950, Other: CE Mark Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 49 For a Chassis Card version, see C2210 Series [ pg 10 ] SBFTF10xx-10x Stand-alone Fast Ethernet Media and Rate Converter 10/100BASE-TX to 100BASE-FX

The SBFTF10xx-105 provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100Base-TX copper environments. Ordering Information SBFTF1011-105 Operating at Layer-2, this converter not only converts copper to fiber, 10/100BASE-TX (RJ-45) [100 m/328 ft.] but it also does Rate Conversion, converting 10/100 copper to 100Base to 100BASE-FX 1300nm MM (ST) [2 km/1.2 fiber. mi.] Link Budget: 11.0 dB SBFTF1013-105 10/100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm MM (SC) [2 km/1.2 mi.] SBFTF1013-105 Link Budget: 11.0 dB SBFTF1039-105 10/100BASE-TX (RJ-45) 100 m/328 ft.] Features Specifications to 100BASE-FX 1300nm MM (LC) [2 km/1.2 mi.] • Auto-Negotiation Standards IEEE 802.3 Link Budget: 11.0 dB Data Rate 10 Mbps; 100 Mbps, Layer-2 SBFTF1014-105 • Auto-MDI/MDIX Filtering Addresses 1K MAC addresses 10/100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1310nm SM (SC) • Link Pass Through Filtering & Forwarding 14,880 pps for Ethernet; Rate 148,800 pps for [20 km/12.4 mi.] Fast Ethernet Link Budget: 16.0 dB • Far-End-Fault (FEF) (FEF) Detection RAM Buffers 512 KB SBFTF1019-105 • Automatic Link Restoration Extend Max Packet Size 2044 bytes untagged; 2048 bytes tagged 10/100BASE-TX (RJ-45) [100 m/328 ft.] network distance up to 120 km to 100BASE-FX 1310nm SM (LC) Switches SW1 (TP): Auto-Negotiation On/Off [20 km/12.4 mi.] • Bridging devices will provide conversion SW2 (TP): Half or Full-duplex with Link Budget: 17.3 dB and integration solutions for half and Auto-Negotiation Off SW3 (TP): 10Mbps or 100 Mbps with SBFTF1040-105 full-duplex environments Auto-Negotiation Off 10/100BASE-TX (RJ-45) [100 m/328 ft.] SW4 (Fiber): Half or Full-duplex to 100BASE-X SFP Slot (empty) • 10 Mbps or 100 Mbps on TP port SW5: Link Pass Through On/Off SW6: Far-End-Fault (FEF) On/Off • Half or full-duplex on all ports including Single Fiber Products Status LEDs PWR (Power): ON = connection to external power fiber SBFTF1029-105 FD (Fiber Duplex): ON=Full-duplex; Off=Half duplex 10/100BASE-TX (RJ-45) [100 m/328 ft.] LNK/ACT (Fiber Link/Activity): ON=Link; to 100BASE-FX 1310nm TX/1550nm RX single Blinking=Activity fiber SM (SC) [20 km/12.4 mi.] CD (Copper Duplex): ON = Full-duplex; Link Budget: 19.0 dB Off = Half-duplex LNK/ACT (Copper Link/Activity): ON = Link; SBFTF1029-106 Blinking = Activity 10/100BASE-TX (RJ-45) [100 m/328 ft.]to 100 (Copper): Off = 10 Mbps; ON = 100 Mbps 100BASE-FX 1550nm TX/1310nm RX single Dimensions W: 3.25” [82 mm ] D: 4.8” [122 mm] H: 1.0” fiber SM (SC) [20 km/12.4 mi.] [25 mm] Link Budget: 19.0 dB Power External AC/DC; 12 VDC, 0.8A min Optional Accessories (sold separately) Environment Operating: 0°C to 50°C SFP Modules Humidity: 5% to 90% (non-condensing) Altitude: 0 – 10,000 ft. Wide Input (24 - 60 VDC) Power Supplies Weight 2 lbs. [0.90 kg] SPS-2460-PS Piggy Back Power Supply Safety Compliance Wall Mount Power Supply: UL Listed Compliance FCC Class A, VCCI Class 1, CISPR22/EN55022 SPS-2460-SA Class A, EN55024, EN61000, CE Mark Stand-Alone Power Supply Warranty Lifetime Mounting Options E-MCR-05 12-slot Media Converter Rack RMS19-SA4-01 4-slot Media Converter Shelf WMBD DIN Rail Bracket 5.0” [127 mm] WMBD-F DIN Rail Bracket (flat) 3.3” [84 mm] WMBL Wall Mount Bracket 4.0” [102 mm] WMBV Vertical Wall Mount Bracket 5.0” [127 mm]

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 50 For a Chassis Card version, see CSRFB10xx-10x [ pg 30 ] SSRFB10xx-100 Stand-alone Fast Ethernet Remotely Managed NID 10/100 Base-TX to 100Base-FX

Ideal for both Enterprise and Service Provider applications where entry level management information is needed on both the local and the remote device. This management information is accessible through the local unit installed in Ordering Information a managed Point System™ Chassis as the remote stand-alone unit reports SSRFB1011-100 its current Operating status back to a local unit. 10/100Base-TX (RJ-45) [100 m/328 ft.] to 100Base-FX 1300nm MM ST [2 km/1.2 mi.] Devices should be used in pairs with the remotely managed stand-alone Link Budget: 11.0 dB unit used in conjunction with the managed chassis card CSRFB10xx-100. SSRFB1013-100 10/100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm MM (SC) [2 km/1.2 mi.] Link Budget: 11.0 dB SSRFB1013-100 SSRFB1014-100 10/100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1310nm SM (SC) [20 km/12.4 mi.] Features Specifications Link Budget: 16.0 dB • Auto-Negotiation Standards IEEE 802.3 TS-1000 OAM v2 SSRFB1040-100 10/100BASE-TX (RJ-45) [100 m/328 ft.] • Auto-MDI/MDIX Data Rate Copper: 10/100 Mbps Fiber: 100 Mbps to SFP slot (empty) • Far-End-Fault (FEF) (FEF) Filtering Addresses 1K MAC addresses RAM Buffers 256K • Transparent Link Pass Through Single Fiber Products Max Frame Size 1916 bytes untagged SSRFB1029-100 1914 bytes tagged • Bandwidth Allocation 10/100BASE-TX (RJ-45) [100 m/328 ft.] Switches SW1: TP Auto-Negotiation to 100BASE-FX 1310nm TX/1550nm RX • Loopback SW2: TP Duplex with Bi-Di SM (SC) [20 km/12.4 mi.] Auto-Negotiation Off Link Budget: 19.0 dB • Last Gasp SW3: TP Speed with Auto-Negotiation Off SSRFB1029-101 • Remote Management SW4: Fiber Duplex 10/100BASE-TX (RJ-45) [100 m/328 ft.] SW5: Link Pass Through to 100BASE-FX 1550nm TX/1310nm RX • Automatic Link Restore SW6: Mode: Terminal or Center Bi-Di SM (SC) [20 km/12.4 mi.] Link Budget: 19.0 dB • Link Test Status LEDs PWR (Power) TP Duplex/Link/Activity SSRFB1029-102 TP 10 Mbps/100 Mbps 10/100BASE-TX (RJ-45) [100 m/328 ft.] Fiber Link/Activity to 100BASE-FX 1310nm TX/1550nm RX Fiber Duplex Bi-Di SM (SC) [40 km/24.9 mi.] Link Budget: 25.0 dB Dimensions Width: 3.25” [82 mm] Read Management Depth: 4.8” [122 mm] SSRFB1029-103 Height: 1.0” [25 mm] 10/100BASE-TX (RJ-45) [100 m/328 ft.] Features to 100BASE-FX 1550nm TX/1310nm RX Power Consumption 3.4 Watts Bi-Di SM (SC) [40 km/24.9 mi.] • Power Environment Operating: 0°C to 50°C Link Budget: 25.0 dB Humidity: 5% to 90% (non-condensing) • Copper Link Status Altitude: 0 – 10,000 ft. Optional Accessories (sold separately) • Copper Speed Power External AC/DC required; 12 VDC 1.25A SFP Modules Weight 2 lbs. [.90 kg] • Copper Duplex Wide Input (24 - 60 VDC) Power Supplies Compliance Safety: Wall Mount Power Supply: UL Listed and CSA certified SPS-2460-PS • Fiber Link Status Regulatory : EN55022 Class A, EN55024; CE Mark Piggy Back Power Supply Warranty Lifetime • Fiber Duplex SPS-2460-SA Stand-Alone Power Supply • Fiber Loop Back Status Mounting Options Applications E-MCR-05 12-Slot Media Converter Rack • Integrate fiber into 10/100 copper environments RMS19-SA4-01 • Remote Mangement Remote stand-alone units report their status to 4-Slot Media Converter Shelf local managed unit WMBL Wall Mount Bracket 4.0” [102 mm] • Remote Loopback assists in identifying network problems WMBV • Bandwidth Control sets throughput to user’s requirements Vertical Wall Mount Bracket 5.0” [127 mm] WMBD DIN Rail Bracket 5.0” [127 mm] WMBD-F DIN Rail Bracket (flat) 3.3” [84 mm]

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 51 For a Chassis Card version, see C2220 Series [ pg 11 ] S2220 Series Stand-alone Fast Ethernet Remotely Managed NID 10/100 Base-TX to 100Base-FX with OAM/IP-Based Management

The ION™ 2220 Series of Network Interface Devices (NIDs) are a remotely managed product that offers IP or IP-Less management methods for secure delivery of Ethernet services for business and mobile backhaul Ordering Information applications. With MEF 9, 14 & 21 certification the ION™ 2220 Series S2220-1011 ensures you are compliant with the latest standards. The ION™ 2220 10/100/1000BASE-T (RJ-45) [100 m] Series is a product with advance features including – IEEE 802.3ah Link to 100BASE-FX 1310nm MM (ST) [2 km/1.2 mi.] OAM, VLAN, QoS, SSH/SSL, jumbo frame support and bandwidth allocation. Link Budget: 11.0 dB S2220-1013 10/100/1000BASE-T (RJ-45) [100 m] S2220-1040 to 100BASE-FX 1310nm MM (SC) [2 km/1.2 mi.] Link Budget: 11.0 dB S2220-1014 10/100/1000BASE-T (RJ-45) [100 m] to 100BASE-LX 1310nm SM (SC) [10 km/6.2 mi.] Features Specifications Link Budget: 16.0 dB • MEF 9, 14 + 21 certified Standards IEEE 802.3, IEEE 802.3ah S2220-1040 10/100/1000BASE-T (RJ-45) [100 m] • 802.3ah Link OAM IEEE Std802.1P IEEE 802.1Q to 100Base-X SFP Slot (empty) • 10K Jumbo Frame Support Data Rate Copper: 10/100/1000 Mbps Fiber: 100 Mbps • Two selectable Remote Single Fiber Products Filtering Addresses 8K MAC Addresses Management modes: S2220-1029-A1 - IP-Based Remote Management Max Frame Size 10,240 bytes 10/100/1000BASE-T (RJ-45) [100 m] to 100BASE-BX-U 1310nm TX/1550nm RX - In-Band (remote device managed by Dimensions Width: 3.25” [82 mm] Bi-Di SM (SC) [20 km/12.4 mi.] Depth: 6.5” [165 mm] local peer) Link Budget: 19.0 dB Height: 1.0” [25 mm] • Auto-MDI/MDIX Power Input: 100-240 VAC, 1A S2220-1029-A2 Output: 12 VDC, 1.25A 10/100/1000BASE-T (RJ-45) [100 m] • Auto-Negotiation to 100BASE-BX-D 1550nm TX/1310nm RX Environment Operating: 0°C to 50°C Bi-Di SM (SC) [20 km/12.4 mi.] • Pause Humidity: 5% to 90% (non-condensing) Link Budget: 19.0 dB Altitude: 0 – 10,000 ft. • Transparent Link Pass Through Weight 2 lb. [.90 kg] *Note all units feature USB port for local management application. • Far-End-Fault (FEF) (FEF) Compliance EN55022 class A, EN55024, UL60950, CE Mark • Remote Loopback Warranty Lifetime • Field Upgradeable Firmware • IEEE 802.1p QoS packet classification Features (Continued) • IPv4 IP TOS, DiffDerv and IPv6 traffic class QoS classification • IEEE 802.1q VLAN and double VLAN tagging with 4096 VIDs • DHCP client • SNTP • TFTP • RADIUS client • RMON counters for each port • Bandwidth profiling • DMI Optical Management

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 52 SPOEB10xx-100 Stand-alone Fast Ethernet PoE Media Converter 10/100Base-TX PoE PSE to 100Base-FX

SPOEB10xx-100 enables enterprises to provide power to network devices over the existing CAT5 data connection. Ordering Information Transition Networks’ AC powered PoE media converters combine data SPOEB1011-100 received over a fiber optic link with -48 VDC power; providing power to Data 10/100BASE-TX (RJ-45) [100 m/328 ft.] Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair to 100BASE-FX 1300nm multimode (ST) cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully [2 km/1.2 mi.] Link Budget: 11.0 dB compatible with Powered Devices (PD) that comply with the IEEE 802.3af: SPOEB1013-100 2003 standard. The converters also include a PD signature sensing and power 10/100BASE-TX (RJ-45) [100 m/328 ft.] monitoring features per the IEEE 802.3af standard. Other features include to 100BASE-FX 1300nm multimode (SC) Over-Current Protection, Under-Current Detection and Fault Protection Input. [2 km/1.2 mi.] Link Budget: 11.0 dB This feature enhanced model offers the ability to enable/disable many of the SPOEB1014-100 features as well as force port capabilities. 10/100BASE-TX (RJ-45) [100 m/328 ft.] SPOEB1011-100 to 100BASE-FX 1310nm SM (SC) In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable [20 km/12.4 mi.] Link Budget: 16.0 dB PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. (Also known as Powered Device Reset.) The PoE converter is fully compatible with devices that comply with the IEEE Optional Accessories (sold separately) 802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI. Mounting Options WMBD or WMBL Wall Mount Brackets RMS19-SA4-01 4-Slot Media Converter Shelf Features Specifications • External AC power supply Standards IEEE 802.3 IEEE Std. 802.3af • IEEE 802.3af Power-Over-Ethernet Switches SW1: Auto-Negotiation On/Off Compatible SW2: Speed TP: Force 10 Mbps or 100 Mbps (SW1 off) SW3: Duplex TP: Force Half or Full Duplex (SW1 off) • 8 VDC PSE Output Voltage SW4: Duplex Fiber: Half or Full Duplex SW5: Auto-MDI/MDIX On/Off • Signal Pair or Spare Pair Power Insertion SW6: PSE On/Off SW7: PSE/LPT on/off • PD Detection Signature SW8: Unused • Over-Current Protection & Under-Current Max Packet Size 1522 bytes untagged 1518 bytes tagged Detection Dimensions Width: 3.25” [82 mm] • Powered Device Reset Depth: 4.8” [120 mm] Height: 1.0” [25 mm] • Switch selectable features and port Power External power supply : 90 – 250 VAC settings Consumption: 20 Watts max • Minimum Load Sensing Environment Operating: 0°C to 50°C Storage: -25° to +85°C • Fault Protection Input Humidity: 5% to 90% (non-condensing) Altitude: 0 – 10,000 ft. • Auto-Negotiation Weight 2 lbs. [0.90 kg] • Auto-MDI/MDIX Compliance EN55022:1994+A1:1996+A2:1997 Class A; FCC Part 15 Subpart B; UL 1950 • Link Pass Through Warranty Lifetime • Far-End-Fault (FEF) (FEF) • Automatic Link Restoration

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 53 For a Chassis Card version, see C3100 Series [ pg 12 ] S3100-Series Stand-alone Fiber to Fiber Media Converter SFP to SFP for Data Rates from 100Mbps to 2.5 Gbps

This fiber to fiber converter is a protocol independent device that supports data rates from 100Mbps up to 2.5 Gbps. It provides reliable and cost- effective conversion between single mode and multimode fiber, while Ordering Information also providing wavelength conversion in CWDM applications. As an SFP S3100-4040 based device, this any-rate to similar-rate converter offers great application 100Mbps to 2.5Gbps fiber repeater with two flexibility. Supported protocols, fiber connectors, and transmission distances open SFP slots, any rate to same rate stand- are determined by the SFP module used on the converter. alone media converter

S3100-4040

Features Specifications • Protocol Transparent Standards Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP) • Supports data rates from 100Mbps to Data Rates Protocol Independent 2.5Gbps 100Mbps to 2.5 Gbps Max. Frame Size 16384 bytes Jumbo Frames Supported • Any-rate to similar-rate conversion Status LEDs PWR: ON (Green) = Power • SFP to SFP Fiber Repeater Port 1 Link: ON = Fiber Signal Detected Port 2 Link: ON = Fiber Signal Detected • Specific wavelength CWDM Transponder Dimensions Width: 3.25” [82mm] • Supported protocols: Fast Ethernet, Depth: 6.5” [165mm] Height 1.0” [25mm] Gigabit Ethernet, SONET (OC-3/12/48), 1 & 2 Gig Fiber Channel, 2.5G InfiniBand, Power Source: External AC/DC required: 12VDC, __Amps FDDI, ESCON/SBCON Consumption:2-3 watts, based on the SFP modules used Environment Operating: 0°C - 50°C • Link Pass Through Storage: -40°C - 85°C Humidity: 5% to 95% (non-condensing) • Auto Link Restore Altitude: 0 to 10,000 feet Weight 2 lbs [0.90 kg] MTBF Greater than 250,000 hours (MIL-HDBK-217F) Greater than 687,000 hours (Bellcore) Compliance FCC Class A, EN55022 Class A, EN55024,CE Mark Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 54 For a Chassis Card version, see C3100 Series [ pg 12 ] SFMFF1xxx-22x Stand-alone Fiber to Fiber Media Converter 1000Base-X or 1Gig Fiber Channel

Ordering Information SFMFF1313-220 Optional Accessories (sold separately) 1000BASE-SX 850nm multimode (SC) [62.5/125 µm fiber: 220 m/722 ft.] [50/125 µm fiber: 550 Wide Input (24 - 60 VDC) Power Supplies m/1804 ft.] SPS-2460-PS Link Budget 7.5 dB Piggy Back Power Supply to 1000BASE-SX 850nm multimode (SC) [62.5/125 µm fiber: 220 m/722 ft.] [50/125 µm SPS-2460-SA fiber: 550 m/1804 ft.] Stand-Alone Power Supply Link Budget 7.5 dB SFMFF1314-220 SFMFF1324-220 Mounting Options 1000BASE-SX 850nm multimode (SC) [62.5/125 µm fiber: 220 m/722 ft.] [50/125 µm fiber: 550 E-MCR-05 Features m/1804 ft.] 12-Slot Media Converter Rack Link Budget 7.0 dB RMS19-SA4-01 • Auto-Negotiation (1000Base-X ports) to 1000BASE-LX 1310nm Extended MM 4-Slot Media Converter Shelf (62.5/125 µm fiber only) (SC) [up to 2 km] • Link Pass Through Link Budget: 7.0 dB WMBD DIN Rail Bracket 5.0” [127 mm] • Far-End-Fault (FEF) (100Base-FX ports) SFMFF1424-220 1000BASE-LX 1310nm SM (SC) [10km/6.2 mi.] WMBD-F • Pause Link Budget: 7.0 dB DIN Rail Bracket (flat) 3.3” [84 mm] to 1000BASE-LX 1310nm Extended MM WMBL (62.5/125 µm fiber only) (SC) [up to 2 km] • Automatic Link Restoration Wall Mount Bracket 4.0” [102 mm] Link Budget: 7.0 dB • Protocol Transparency WMBV SFMFF1314-220 Vertical Wall Mount Bracket 5.0” [127 mm] 1000BASE-SX 850nm multimode (SC) [62.5/125 µm fiber: 220 m/722 ft.] [50/125 µm fiber: 550 m/1804 ft.] Link Budget: 7.0 dB Specifications to 1000BASE-LX 1310nm SM (SC) Standards IEEE 802.3 [10 km/6.2 mi.] ATM, OC-3 Link Budget: 7.0 dB STM-1 HSTR, FDDI Single Fiber Products Fiber Optic Connectors Multimode : Min TX PWR: -10.0 dBm SFMFF1329-220 Max TX PWR: -4.0 dBm 1000BASE-SX 850nm multimode (SC) [62.5/125 RX Sensitivity: -17.0 dBm µm fiber: 220 m/722 ft.] [50/125 µm fiber: 550 Max In PWR: 0.0 dBm m/1804 ft.] Link Budget: 7.00 dB Link Budget: 7.0 dB to 1000BASE-LX 1310nm TX/1550nm RX Single Mode: Min TX PWR: -13.0 dBm single fiber single mode (SC) [20 km/12.4 mi.] Max TX PWR: -3.0 dBm Link Budget: 13.0 dB RX Sensitivity: -20.0 dBm Max In PWR: -3.0 dBm SFMFF1329-221 Link Budget: 7.00 dB 1000BASE-SX 850nm multimode (SC) [62.5/125 µm fiber: 220 m/722 ft.] [50/125 µm fiber: 550 LED Power: Lit for normal operation m/1804 ft.] Port LKS (Single Mode fiber link): Steady LED indicates Link Budget: 7.0 dB single mode fiber link to 1000BASE-LX 1550nm TX/1310nm RX Port LKM (Multimode fiber link): Steady LED indicates single fiber single mode (SC) [20 km/12.4 mi.] multimode fiber link Link Budget: 13.0 dB Power: External AC/DC required 12V DC, 0.5 A; unregulated; standard; SPS-1872-SA or SPS-1872-PS: optional wide input power supply; Output 12VDC; 1.0 A; 12 watts max. Dimensions Width: 3.25” [83 mm] Depth: 4.7” [119 mm] Applications Height: 1.0” [25 mm] • Used individually or in pairs, this mode converter can extend 1000 Mbps Gigabit Environment Operating: 0°C to 50°C Ethernet or Fiber Channel signals over single mode fiber up to 125 km. Humidity: 5% to 90% (non-condensing) Altitude: 0 – 10,000 ft. • Convert 1000BASE-SX ports on a Gigabit Ethernet switch to 1000BASE-LX on a port- Weight 2Lbs. [0.9kg] by-port basis Compliance Safety: Wall Mount Power Supply: UL listed and CSA certified Regulatory: FCC Class A & B, CISPR/EN55022 Class A & B, • Ideal for campus area networks or other applications requiring the distance CE Mark advantages of single mode fiber Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 55 For a Chassis Card version, see C3110 Series [ pg 13 ] SGETF10xx-110 Series Stand-alone Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX

Migrate to Gigabit Ethernet in a cost-effective manner. Used in conjunction with lower cost 1000BASE-T switches, companies can take advantage of the high bandwidth Gigabit Ethernet offers without all of Ordering Information the higher costs. Transition Networks 1000BASE-T to SX/LX converters SGETF1013-110 allow users to extend the bandwidth to those users outside the reach of 1000BASE-T (RJ-45) [100 m/328 ft.] the 1000BASE-T standard (up to 125 km). to 1000BASE-SX 850nm MM (SC) [62.5/125 µm fiber: 220 m/722 ft.] Link Budget: 7.0 dB [50/125 µm fiber: 550 m/1804 ft.] Link Budget: 7.0 dB SGETF1024-110 1000BASE-T (RJ-45) [100 m/328 ft.] SGETF1013-110 to 1000BASE-SX 1300nm Extended MM (62.5/125 µm fiber only) (SC) [2 km/1.2 mi.] Features Specifications Link Budget: 7.0 dB SGETF1039-110 • Auto-MDI/MDIX Standards IEEE 802.3ab 1000BASE-T (RJ-45) [100 m/328 ft.] IEEE 802.3z to 1000BASE-SX 850nm MM (LC) • Copper & Fiber Auto-Negotiation 6-position Switch SW1: Remote Fiber Fault Detect (Down=Enabled) (via TN-SFP-SX) [62.5/125 µm fiber: 220 SW2: Symmetric Pause m/722 ft.] • Transparent Link Pass Through SW3: Asymmetric Pause Link Budget: 8.0 dB [50/125 µm fiber: 550 SW4: Transparent Link Pass Through (UP=Enabled) m/1804 ft.] • Automatic Link Restoration SW5: Fiber Auto-Negotiation (Down=Enabled) Link Budget: 8.0 dB SW6: Loopback (Down=Enabled) • Pause SGETF1014-110 Status LEDs PWR (Power): Steady green LED indicates 1000BASE-T (RJ-45) [100 m/328 ft.] • Remote Fault Detect connection to external AC power to 1000BASE-LX 1310nm SM (SC) [10 km/6.2 RXF (Fiber receive): Flashing LED indicates mi.] reception of data on fiber link Link Budget: 10.5 dB LKF (Fiber link): Steady LED indicates fiber SGETF1040-110 link connection 1000BASE-T (RJ-45) [100 m/328 ft.] RXC (Copper receive): Flashing LED indicates to SFP slot (empty) reception of data on copper link LKC (Copper link): Steady LED indicates copper Single Fiber Products link connection SGETF1029-110 Dimensions Width: 3.25” [82 mm] 1000BASE-T (RJ-45) [100 m/328 ft.] Depth: 4.8” [122 mm] to 1000BASE-LX 1310nm TX/1550nm RX Height: 1.0” [25 mm] single fiber SM (SC) [20 km/12.4 mi.] Power External AC/DC required; 12 VDC, 0.8A min Link Budget: 13.0 dB Environment Operating: 0°C to 50°C SGETF1029-111 Humidity : 5% to 95% (non-condensing) 1000BASE-T (RJ-45) [100 m/328 ft.] Altitude 0 – 10,000 ft. to 1000BASE-LX 1550nm TX/1310nm RX single fiber SM (SC) [20 km/12.4 mi.] Weight 2 lbs. [0.90 kg] Link Budget: 13.0 d Safety Compliance Wall Mount Power Supply: UL Listed, C-UL Listed (Canada) Optional Accessories (sold separately) Compliance FCC Class A, CISPR22/EN55022 Class A, EN55024, EN61000, CE Mark SFP Modules Warranty Lifetime Wide Input (24 - 60 VDC) Power Supplies SPS-2460-PS Piggy Back Power Supply SPS-2460-SA Stand-Alone Power Supply Mounting Options E-MCR-05 12-Slot Media Converter Rack RMS19-SA4-01 4-Slot Media Converter Shelf WMBD DIN Rail Bracket 5.0” [127 mm] WMBD-F DIN Rail Bracket (flat, small) 3.1” [79 mm] WMBL Wall Mount Bracket 4.0” [102 mm] WMBV Vertical Wall Mount Bracket 5.0” [127 mm]

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 56 For a Chassis Card version, see C3210 Series [ pg 14 ] or CGFEB1040-140 & CGFEB4040-180 [ pg 31 ] SGFEB10xx-x3x Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX

The SGFEB provides a cost effective method for integrating 1000Base-SX/ LX fiber into a 10/100/1000Base-T copper environment. Deploying fiber into today’s networks provides the ability to transmit data over significantly longer Ordering Information distances than is possible on copper. Fiber also protects your data from SGFEB1040-130 external sources of noise and interference, improving network performance. 10/100/1000Base-T (RJ-45) [100 m/328 ft.] to 100/1000Base-X SFP Slot (empty) SGFEB1013-130 Operating at Later-2, this converter not only converts copper to fiber, it also does Rate conversion, converting 10/100/1000 copper to 1000Base fiber. SGFEB1013-130 10/100t/1000Base-T (RJ-45) [100 m/328 ft.] SGFEB1040-330 to 1000Base-SX 850nm MM (SC) [62.5/125 um: 220 m/722 ft.] [50/125 um: 550 m/1804 ft.] Link Budget 7.5dB SGFEB1039-130 10/100/1000Base-T (RJ-45) [100 m/328 ft.] to 1000Base-SX 850nm MM (LC) [62.5/125 um: 220 m/722 ft.] [50/125 um: 550 m/1804 ft.] Features Specifications Link Budget 8.0dB Standards IEEE 802.3 • Auto Negotiation SGFEB1014-130 IEEE 802.3ab 10/100/1000Base-T (RJ-45) [100 m/328 ft.] to IEEE 802.3u, • Auto-MDI/MDIX 1000Base-LX 1310nm SM (SC) [10 km/6.2 mi.] IEEE 802.3z Link Budget 10.5dB • Link Pass Through IEEE 802.3az Data Rates Copper:10/100/1000 Mbps SGFEB1024-130 • Far End Fault (FEF) Fiber:1000Mbps, 100Mbps also supported via 10/100/1000Base-T (RJ-45) [100 m/328ft.] SFP port to 1000Base-SX 1310nm Extended MM • Remote Fault Detect (62.5/125mm fiber only) (SC) [up to 2 km] Filtering Addresses: 8k MAC Addresses Link Budget 7.0dB • Provides rate conversion while also Max Frame Size: 10,260 byte Jumbo Frames SGFEB1019-130 increasing transmission distances Status LEDs PWR (Power): On = Power is provided to converter 10/100/1000Base-T (RJ-45) [100 m/328 ft.] to 1000Base-LX 1310nm SM (LC) [10 km/6.2 • Supports multimode or single mode LACT (Fiber Link/Activity): On = Link, Blink = Activity mi.] Link Budget 10.5dB fiber RJ-45 Upper Left (TPLink/Activity/Duplex): SGFEB1040-230 • Versions available with fixed SC or LC Green = Link Full Duplex, Blink = Activity, (1) Port 10/100/1000Base-T (RJ-45) [100 Amber = Link Half Duplex, Blink = Activity optics, as well as modular SFP optics m/328 ft.] RJ-45 Upper Right (Speed): Green = 1000Mbps, to (2) Ports 100/1000Base-X SFP Slot (empty) Amber = 100Mbps, Off = 10Mbps • Long haul transmission distances SGFEB1040-330 Dip Switches: Two Port Models are supported with a variety of SFP (2) Port 10/100/1000Base-T (RJ-45) [100 Switch 1: TP1 - Auto-Negotiation Enable / Disable m/328 ft.] modules Switch 2: TP1 – Force 100Mbps or 10Mbps with to (2) Ports 100/1000Base-X SFP Slot (empty) • SFP ports support dual speeds: switch 1 disabled Switch 3: TP1 – Force Full or Half Duplex with 100/1000/SGMII switch 1 disabled Single Fiber Products Switch 4: Link Pass Through Enable / Disable • Multiport versions provide 3 or 4 Switch 5 & 6: Controls the Fiber SFP port for SGFEB1029-130 port switch functionality or provide 1000M, 100M, or SGMII 10/100/1000Base-T (RJ-45) [100 m/328 ft.] redundant fiber links Multiport Models with additional 4 position dip-switch: to 1000Base-LX 1310nm TX/1550nm RX SM Switch 1 & 2: Controls the 2nd Fiber SFP port for (SC) [20 km/12.4 mi.] Link Budget 13.0dB • Supports IEEE 802.3az Energy Efficient 1000M, 100M, or SGMII SGFEB1029-131 Ethernet Switch 3 & 4: Fiber Redundancy Enable/Disable, 10/100/1000Base-T (RJ-45) [100 m/328 ft.] Revertive Mode, and Fiber P2/P3 blocking to 1000Base-LX 1550nm TX/1310nm RX SM Dimensions: Length: 4.8” [122 mm] (SC) [20 km/12.4 mi.] Link Budget 13.0dB Width: 3.25” [82 mm] Height: 1.0” [25 mm] Optional Accessories (sold separately) Power: Input: 7.5 to 24 VDC SFP Modules Provided by wide input AC Wall Mount Adapter Transition Networks offers a variety for 1000M Power Consumption 2.2 Watts and 100M Fiber SFP Modules Environment: Operating: 0°C to 50°C DC Power Supply Storage: -15°C to 65° C SPS-2460-SA or SPS-2460-PS: Humidity: 5% - 95%, (non-condensing) wide input 24 – 60 VDC power supply Altitude: 0 – 10,000 ft. Weight: 2 lbs. (0.9kg) Mounting options Compliance: EN55022 Class A, EN55024, FCC Class A, CE Mark E-MCR-05: Safety: Wall Mounted Power Supply: UL Listed, UL60950 and 12 Slot Powered Media Converter Rack CSA Certified RMS19-SA4-01: Warranty: Lifetime 4-Slot Media Converter Shelf WMBL: Wall Mount Bracket WMBD: DIN Rail Mount Bracket

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 57 SGPOE10xx-1x0 Stand-alone Gigabit Ethernet PoE Media Converter 10/100/1000Base-T PoE PSE to 1000Base-X

Enables enterprises to provide power to network devices over the existing CAT5 data connection. Ordering Information Transition’s AC powered PoE media converters combine data received over SGPOE1013-100 a fiber optic link with -48 VDC power; providing power to Data Terminal 10/100/1000BASE-T (RJ-45) Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The [100 m/328 ft.] PoE converters are Power Sourcing Equipment (PSE) and are fully compatible to 1000BASE-SX 850nm MM (SC) [62.5/125 µm: with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. 220 m/722 ft.] The converters also include a PD signature sensing and power monitoring Link Budget: 8.0 dB [50/125 µm: Features per the IEEE 802.3af standard. Other Features include Over-Current 550 m/1804 ft.] Protection, Under-Current Detection and Fault Protection Input. Link Budget: 8.0 dB SGPOE140-110 This feature enhanced model offers the ability to enable/disable many of SGPOE1039-100 the Features as well as force port capabilities (see switch section under 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] Specifications). to 1000BASE-SX 850nm MM (LC) [62.5/125 µm: In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable 220 m/722 ft.] PSE power output on the UTP port for 2 seconds to allow remote device to Link Budget: 8.0 dB [50/125 µm: re-initialize. Also known as Powered Device Reset. 550 m/1804 ft.] Link Budget: 8.0 dB The PoE converter is fully compatible with devices that comply with the IEEE SGPOE1040-100 802.3af standard as well as select legacy PD’s. The PoE converter is capable 10/100/1000BASE-T (RJ-45) of inserting power on data mode A or mode B pairs of the MDI. [100 m/328 ft.] to 100/1000BASE-X SFP Slot (empty) SGPOE1040-110 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] Features Specifications to (2) 100/1000BASE-X SFP slots (empty) • SFP ports support either 100Base or Standards IEEE 802.3 1000Base fiber IEEE 802.3af Optional Accessories (sold separately) • Redundant SFP port option Switches SW1: Auto-Negotiation TP On/Off SFP Modules SW2: Speed TP: Force 10 Mbps or 100 Mbps (SW1 off) • IEEE 802.3af Power-Over-Ethernet SW3: Duplex TP: Force Half or Full Duplex (SW1 off) Compatible SW4: Duplex Fiber: Half or Full Duplex Mounting Options SW5: Auto-MDI/MDIX On/Off • 48 VDC PSE Output Voltage SW6: PSE On/Off WMBD SW7: PSE/LPT on/off DIN Rail Mount Bracket 5.0” [127 mm] • Mode A or Mode B Pairs Power Insertion SW8: Unused WMBL • PD Detection Signature Max Packet Size 1632 bytes untagged Wall Mount Bracket 4.0” [102 mm] 1628 bytes tagged • PoE Legacy Detect for non-IEEE 802.3af compatible Powered Devices (PD) MAC Addresses 8K • Over-Current Protection & Under-Current Dimensions Width: 4.4” [112 mm] Detection Depth: 5.1” [129 mm] Height: 1.0” [25 mm] • Powered Device Reset Power 90 – 250VAC external power supply • Minimum Load Sensing External AC/DC required; 48 vdc 0.67A Consumption: 20 Watts max. • Fault Protection Input Environment Operating: 0°C to 40°C • Auto-Negotiation Storage: -25° to 85°C Humidity: 5% to 95% (non-condensing) • Auto-MDI/MDIX Altitude: 0 – 10,000 ft. • Link Pass Through available on Weight 2 lbs. [0.90 kg] SGPOE10xx-100 Compliance EN55022:1994+A1:1996+A2:1997 Class A; FCC Part 15 Subpart B; UL 1950 • Automatic Link Restoration Warranty Lifetime • External AC power supply

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 58 For a Chassis Card version, see C3220 Series [ pg 15 ] S3220 Series Stand-alone Gigabit Ethernet Remotely Managed NID 10/100/1000Base-T to 1000Base-X with OAM/IP-Based Management

The ION™ 3220 Series of Network Interface Devices (NIDs) are a remotely managed product that offers IP or IP-Less management methods for secure Ordering Information delivery of Ethernet services for business and mobile backhaul applications. S3220-1013 With MEF 9, 14 & 21 certification the ION™ 3220 Series ensures you 10/100/1000BASE-T (RJ-45) [100 m] are compliant with the latest standards. The ION™ 3220 Series is a to 1000BASE-SX 850nm MM (SC) [62.5/125 10/100/1000Mbps product with advance features including – IEEE 802.3ah µm fiber: 220 m/722 ft.] [50/125 µm fiber: 550 Link OAM, VLAN, QoS, SSH/SSL, jumbo frame support and bandwidth m/1804 ft.] allocation. Link Budget: 8.5 dB S3220-1014 10/100/1000BASE-T (RJ-45) [100 m] S3220-1040 to 1000BASE-LX 1310nm SM (SC) [10 km/6.2 mi.] Link Budget: 10.5 dB *S3220-1040 Features Specifications 10/100/1000BASE-T (RJ-45) [100 m] • MEF 9, 14 + 21 certified Standards IEEE 802.3 to (1) 100/1000Base-X Open SFP Slot IEEE 802.3ah • 802.3ah Link OAM IEEE 802.1P *S3221-1040 IEEE 802.1Q 10/100/1000BASE-T (RJ-45) [100 m] • 10K Jumbo Frame Support to (2) 100/1000Base-X Open SFP Slot Data Rate Copper: 10/100/1000 Mbps • Two selectable Remote Management Fiber: 1000 Mbps modes: Single Fiber Products - IP-Based Remote Management Filtering Address 8K MAC Addresses - In-Band (remote device managed by Max Frame Size 10,240 bytes S3220-1029-A1 local peer) 10/100/1000BASE-T (RJ-45) [100 m] Dimensions Width: 3.25” [82 mm] to 1000BASE-BX 1310nm TX/1490nm RX Depth: 6.5” [165 mm] • Auto-MDI/MDIX Bi-Di SM (SC) Height:1.0” [25 mm] [20 km/12.4 mi.] • Auto-Negotiation Power Input: 100-240 VAC,1A Link Budget: 14.0 dB Output: 12 VDC, 1.25A • Pause S3220-1029-A2 • Transparent Link Pass Through Environment Operating: 0°C to 40°C 10/100/1000BASE-T (RJ-45) [100 m] Storage: -25° to 85°C to 1000BASE-BX 1490nm TX/1310nm • Far-End-Fault (FEF) Humidity: 5% to 95% (non-condensing) RX Bi-Di SM (SC) Altitude: 0 – 10,000 ft. [20 km/12.4 mi.] • Remote Loopback Weight 2.0 lbs. [0.90 kg] Link Budget: 14.0 dB • Field Upgradeable Firmware Compliance EN55022 Class A, EN55024, UL60950, CE Mark • IEEE 802.1p QoS packet classification Warranty Lifetime Optional Accessories (sold separately) • IPv4 IP TOS, DiffDerv and IPv6 traffic SFP Modules class QoS classification

• IEEE 802.1q VLAN and double VLAN Note: all units feature USB port for local tagging with 4096 VIDs management application. • DHCP client *S3220-1040 and S3221-1040 have SGMII • SNTP support for use with 10/100/1000BASE-T Applications copper SFPs. • TFTP • Ethernet in the First Mile (EFM) • E-Line Services (EPL & EVPL) • RADIUS client • Fiber-to-the-Premise (FTTP) • Enterprise Markets • RMON counters for each port • Bandwidth profiling • DMI Optical Management • Cable diagnostic function for copper ports • SSH • Telnet • Command Line Interface (CLI) • Web management • Focal Point Management • SNMP v1, v2c, and v3 • USB port for basic setup • Management VLAN

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 59 For a Chassis Card version, see C3230 Series [ pg 16 ] S3230 Series Stand-alone Gigabit Ethernet Remotely Managed NID 10/100/1000Base-T to 1000Base-X with OAM/IP-Based Management

The ION 3230 Series of Network Interface Devices (NIDs) are multi-service NIDs that provide SLA-assurance and advance fault management that is compliant with MEF and IEEE standards. The ION 3230 Series are designed for Ordering Information business Ethernet and mobile backhaul deployments. The ION S3230 Series S3230-1013 are MEF 9, 14 & 21 certified. The ION 3230 Series is a 10/100/1000Mbps 10/100/1000BASE-T (RJ-45) [100 m] product with advance features including – IEEE 802.1ag Service OAM, IEEE to 1000BASE-SX 850nm MM (SC) [62.5/125 802.3ah Link OAM, ITU Y.1731 Performance Monitoring, VLAN, QoS, SSH/SSL, µm fiber: 220 m/722 ft.] [50/125 µm fiber: 550 m/1804 ft.] jumbo frame support and bandwidth allocation. Link Budget: 8.5 dB S3230-1014 10/100/1000BASE-T (RJ-45) [100 m] S3231-1040 to 1000BASE-LX 1310nm SM (SC) [10 km/6.2 mi.] Link Budget: 10.5 dB Features *S3230-1040 Specifications 10/100/1000BASE-T (RJ-45) [100 m] • MEF 9, 14 + 21 certified Standards IEEE 802.3 to (1) 100/1000Base-X SFP Slot (empty) • 802.3ah Link OAM IEEE 802.3ah IEEE 802.1P *S3231-1040 • ITU Y.1731 IEEE 802.1Q 10/100/1000BASE-T (RJ-45) [100 m] to (2) 100/1000Base-X SFP Slots (empty) • 802.1ag Service OAM Data Rate Copper: 10/100/1000 Mbps Fiber: 1000 Mbps • 10K Jumbo Frame Support Filtering Address 8K MAC Addresses Single Fiber Products • Two selectable Remote Management modes: Max Frame Size 10,240 bytes S3230-1029-A1 -IP-Based Remote Management 10/100/1000BASE-T (RJ-45) [100 m] Dimensions Width: 3.25” [82 mm] - In-Band (remote device managed to 1000BASE-BX-U 1310nm TX/1490nm RX Depth: 6.5” [165 mm] by local peer) single fiber single mode (SC) Height:1.0” [25 mm] [20 km/12.4 mi.] • Auto-MDI/MDIX Power Input: 100-240 VAC,1A Link Budget: 14.0 dB Output: 12 VDC, 1.25A • Auto-Negotiation SS3230-1029-A2 Environment Operating: 0°C to 40°C 10/100/1000BASE-T (RJ-45) [100 m] • Pause Storage: -25° to 85°C to 1000BASE-BX-D 1490nm TX/1310nm RX • Transparent Link Pass Through Humidity: 5% to 95% (non-condensing) single fiber single mode (SC) Altitude: 0 – 10,000 ft. [20 km/12.4 mi.] • Far-End-Fault (FEF) Weight 2.0 lbs. [0.90 kg] Link Budget: 14.0 dB • Remote Loopback Compliance EN55022 Class A, EN55024, UL60950,CE Mark • Field Upgradeable Firmware Warranty Lifetime Note: all units feature USB port for local management application. • IEEE 802.1p QoS packet classification *S3230-1040 and S3231-1040 have SGMII • IPv4 IP TOS, DiffDerv and IPv6 traffic support for use with 10/100/1000BASE-T class QoS classification copper SFPs. • IEEE 802.1q VLAN and double VLAN tagging with 4096 VIDs • DHCP client Optional Accessories (sold separately) • SNTP SFP Modules • TFTP • RADIUS client Applications • RMON counters for each port • Ethernet in the First Mile (EFM) • E-Line Services (EPL & EVPL) • Bandwidth profiling • Fiber to the Premise (FTTP) • Enterprise Markets • DMI Optical Management • Cable diagnostic function for copper ports • SSH • Telnet • Command Line Interface (CLI) • Web management • Focal Point Management • SNMP v1, v2c, and v3 • USB port for basic setup • Management VLAN

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 60 For a Chassis Card version, see C4110 Series [ pg 17 ] S4110 Series Stand-alone Fiber to Fiber Media Converter SFP+ to SFP+ for Data Rates from 1 Gbps to 11.5 Gbps

The S4110-4848 is a 10Gbps protocol independent media converter with two pluggable SFP+ ports. Each port can support data rates from 1Gbps up to 11.5Gbps allowing network designers to customize the S4110 with a pair of Ordering Information SFP modules from Transition Networks’ wide SFP product offering, to meet S4110-4848 their network requirements. The S4110-4848 can be used as an any-rate to 1 Gbps to 11.5Gbps fiber repeater with two similar-rate fiber mode converter, as well as a WDM transponder. open SFP+ slots, any rate to same rate stand-alone media converter

Optional Accessories (sold separately) SFP Modules S4110-4848 Choose from a wide variety of SFP and SFP+ modules offered by Transition Networks Features Specifications Mounting Options: WMBL • Fiber to fiber repeater Standards IEEE 802.3ae ITU.G.709 Wall Mount Bracket 4.0" [102mm] • Supports data rates from 1Gbps to SFF8431 WMBD Multi-sourcing Agreement (MSA) Din Rail Bracket 5.0" [127mm] 11.5Gbps Small Form Factor Pluggable (SFP) E-MCR-05 • Support Any-rate to Similar-rate Data Rate Protocol Independent, 1Gbps to 11.5Gbps 12 Slot Media Converter Rack • Protocol Transparent, supports: TDM Port (T1) PWR: On = Power Port 1 Link/Act: On = Link, Flashing = Network Traffic RMS19-SA4-01 -Ethernet: 10Gig LAN, 10Gig Wan Port 2 Link/Act: On = Link, Flashing = Network Traffic 4 Slot Media Converter Shelf 1Gig LAN Dip Switches Only 4 of the 8 Dip Switches are used to select the - Fiber Channel: 10, 8, 4, 2, 1Gig operational data rate, see the user guide for the -SONET/SDN OC-192, OC-48 supported dip switch configurations • SFP to SFP or SFP+ to SFP+ Dimensions Width: 3.25” [82mm] Depth: 6.5” [165mm] • Provides conversion between different Height: 1.0” [25mm] types of fiber Power External AC/DC power supply, Universal AC input, 12VDC 1.5A output • Supported transmission distance based Environment Operating: 0°C to 50 °C on the SFP modules and fiber type used Storage: -40° – 85 °C • Supports 3R (Re-amply, Re-shape, and Humidity: 5% to 95% (non condensing) Altitude: 0 – 10,000 feet Re-time) signal regeneration Weight 2 lbs. [0.90 kg] • No frame size limitations MTBF w/Power Supply Greater than 41,660 hours (MIL-HDBK-217F) Greater than 114,580 hours (Bellcore) • Use as a fiber mode converter MTBF w/o Power Supply Greater than 250,000 hours (MIL-HDBK-217F) • Use as a specific wavelength CWDM Greater than 687,000 hours (Bellcore) Transponder Compliance FCC Class A; CE Mark, • Link Pass Through EN55022 Class A EN55024Warranty • Auto Link Restore Waranty Lifetime • Also available as an ION™ slide-in card

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 61 For a Chassis Card version, see C4120 Series [ pg 18 ] S4120 Series Stand-alone 10Gigabit Ethernet Media Converter 10GBase-T Copper to Fiber

The x4120-1048 is a 10 Gigabit Ethernet copper to fiber media converter. It offers conversion technology by providing one 10GBase-T RJ-45 port and one pluggable 10GBase-X fiber SFP+ port. The open SFP+ port supports a wide Ordering Information variety of Transition Networks 10GE SFP+ fiber modules, as well as third party S4120-1048 MSA compatible SFP+ modules. 10GBase-T RJ-45 100m to 10GBase-X SFP+ Slot (Empty) The x4120 provides several 10G Ethernet enterprise and data center connectivity solutions. Since most 10G Ethernet switches support a Optional Accessories (sold separately) combination of copper RJ-45 and open SFP+ ports, the x4120 allows users to convert either of these ports to the media type of their preference to match their network requirements, including direct attached copper SFP+ cables. 10Gig SFP+ Modules TN-10GSFP-xx S4120-1048 The stand-alone S4120 is an unmanaged device, until it is linked to C4120 installed in a managed ION™ chassis, then remote in-band management of 10GBase SFP+, MSA Compatible, the S4120 is available. for Dual Strand and Single Strand fiber TN-J9150A 10GBase SFP+, HP Compatible, 10GBase-SR Features Specifications TN-SFP-10G-xx • Transparent Link Pass Through Standards IEEE 802.3 10GBase SFP+, Cisco Compatible, for Dual IEEE 802.3an Strand and Single Strand fiber • Auto-Negotiation IEEE 802.3ae IEEE 802.3az TN-CWDM-10G-1xx0-40 10GBase CWDM SFP+, • Auto-MDI/MDIX Data Rate 10 Gbps Cisco Compatible, 40km • Automatic Link Restoration Status LEDs PWR (Power): On = power is on TN-CWDM-10G-1xx0-80 L/A SFP+ (Fiber port link and activity statue): 10GBase CWDM SFP+, • Loopback on Fiber and Copper On = Link OK Cisco Compatible, 80km Flashing = Link and Activity OK • DMI Copper Link (Copper Link Status): DAC-10G-SFP-0xM On = Link OK 10G SFP+ Direct Attached Copper Cable • Support Remote In-band Management Copper Act (Copper Link Activity): Assemblies (See SFP chapter for details) and Remote Firmware Upgrade when On = Activity OK linked to a C4120 card installed in a Dip Swithes SW1: Copper Loopback Mounting Brackets managed ION™ chassis SW2: Fiber Loopback SW3: not used WMBL • Fiber Port supported standards SW4: Transparent Link Pass Through Wall Mount Bracket 4.0” [102 mm] 10GBase-SR Dimensions Width: 3.25” [82.55 mm] WMBD 10GBase-LRM Depth: 6.5” [165 mm] 5.0” [127 mm] DIN Rail Mount Bracket Height: 1.0” [25.4 mm] 10GBase-LR E-MCR-05 10GBase-ER Power External AC/DC power supply, Universal AC input, 12-Slot Media Converter Rack 12VDC 1.6A output 10GBase-ZR RMS19-SA4-01 Power Consumption 10.5 watts • The open SFP+ port also supports: 4-Slot Media Converter Shelf - Direct attached 10G copper cable Environment Operating: 0°C to 50°C Storage: -15°C to 65°C assemblies: Humidity: 5% to 95% (non condensing) - Both Class-I and Class-II fiber Altitude: 0 – 10,000 feet - SFP+ modules Weight 2 lbs - SFP modules supporting WDM technology MTBF With Power Supply: Greater than 41,660 hours (MIL-HDBK-217F) • Support 100m on Cat6a or higher Greater than 114,580 hours (Bellcore) UTP Per Energy Efficient Ethernet MTBF w/o Power Supply Greater than 250,000 hours (MIL-HDBK-217F) standards, IEEE 802.3az, UTP cable Greater than 687,000 hours (Bellcore) length is detected and power is Compliance FCC Class A, EN55022 Class A, EN55024, CE Mark adjusted according, to reduce power Warranty Lifetime consumption on shorter UTP cable installs

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 62 For a Chassis Card version, see CTGFFxxxx-100 [ pg 32 ] STGFFxxxx-100 Stand-alone 10Gigabit Ethernet Media Converter 10GBase-X to 10GBase-X

The Transition Networks 10 Gigabit Ethernet fiber to fiber converter is a two-port 10G pluggable media converter, supporting a variety of XFP and SFP+ modules allowing network designers to utilize the module to Ordering Information meet their network requirements. STGFF4747-100 The media converter can use either Transition Networks or third (2) Port 10GBase-xx open XFP to Open XFP party MSA compatible 10G XFP or SFP+ modules including support STGFF4848-100 for the following standards; 10GBase-SR, 10GBase-LR, 10GBase-ER, (2) Port 10GBase-xx open SFP+ 10GBase-LRM, and 10GBase-ZR. to Open SFP+ This converter provides 3R (Reamplify, Reshape, and Retime) optical signal regeneration. Optional Accessories (sold separately)

STGFF4848-100 Mounting Options WMBD DIN Rail Bracket 5.0” [127 mm] WMBD-F DIN Rail Bracket (flat) 3.3” [84 mm] WMBL Wall Mount Bracket 4.0” [102 mm] WMBV Features Specifications Vertical Wall Mount Bracket 5.0” [127 mm] • Supports 10 Gigabit Ethernet Fiber to Standards IEEE 802.3ae Fiber full duplex conversion IEEE 802.3ak IEEE 802.3ag Wide Input (24 - 60 VDC) Power Supplies • LED Link Status Indicators IEEE 802.3 IEEE 802.3x SPS-2460-SA Stand-Alone Power Supply • Link Pass Through Multisource Agreement (MSA) XFP and SFP+ • Full-Duplex Data Rate 10 Gbps • Automatic Link Restoration Status LED PWR (power): GREEN- power on 1LNK- fiber #1 link: GREEN- On link • Loopback 1ACT- fiber #1 activity/fault: GREEN- BLINK activity, • Supports +5V, +3.3V, and +1.8V MSA YELLOW- Fault compliant XFP modules 2LNK- fiber #2 link: GREEN- On link 2ACT- fiber #2 activity/fault: GREEN- BLINK • Supports 3R (Reamplify, Reshape, and activity, Retime) optical signal regeneration YELLOW- Fault • Supports 10GBase-CX4 modules in the DIP Switches SW1- Port 1 mode STGFF4747-100 UP: Limiting (xR); DOWN: Linear (LRM) SW2- Port 2 mode UP: Limiting (xR); DOWN: Linear (LRM) SW3- LPT UP: Enabled; DOWN: Disabled SW4-Interface loopback, forces each fiber to loop its RX to TX Dimensions Width: 1.72” [44 mm] Depth: 5.0” [127 mm] Height: 3.4” [86 mm] Power Consumption : 7 Watts Supply: 12 VDC barrel Environment Operating: 0°C to 50°C NOTE: dependant on ratings of the XFP and SFP+ modules used Weight 1 lb. [0.45 kg] Compliance FCC Class A, EN55024 (CISPR22) Class A; CEMark; EN55022 Class A Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 63 For a Chassis Card version, see C6010 Series [ pg 19 ] S6010 Series Stand-alone T1/E1 Remotely Managed NID T1/E1 over Fiber

The T1/E1 copper to fiber network interface device (NID) provides a solution for those users that need to extend T1/E1 or PRI connections over fiber. Ordering Information The T1/E1 supports Small Form Pluggable (SFP) transceivers to support S6010-1011 a variety of fiber types, distances and wavelengths to provide maximum Twisted Pair (RJ-48) [1.5 km/0.9 mi.] flexibility across a variety of network topologies. The use of Coarse Wave to 1300nm multimode (ST) [2 km/1.2 mi.] Division Multiplexing (CWDM) SFPs can be utilized to further increase the Link Budget: 11.0 dB bandwidth capacity of the fiber infrastructure. S6010-1013 The T1/E1NID must be used in pairs. A typical installation will include a Twisted Pair (RJ-48) [1.5 km/0.9 mi.] chassis card installed in the ION™ Platform locally and a stand-alone device to 1300nm multimode (SC) [2 km/1.2 mi.] installed at the remote location. Link Budget: 12.0 dB S6010-1040 S6010-1014 Twisted Pair (RJ-48) [1.5 km/0.9 mi.] to 1310nm single mode (SC) [20 km/12.4 mi.] Features Specifications Link Budget: 16.0 dB Standards ANSI T1.102 • Remote in-band management S6010-1040 T1.402 Twisted Pair (RJ-48) [1.5 km/0.9 mi.] T1.408 • Local or Remote Loopbacks - Copper to *SFP slot (empty) or Fiber ITU I.431 G.703 S6010-3040 • Switch selectable for T1 or E1 G.736 (2) Coax (BNC) G.775 to *SFP slot (empty) • Remote firmware upgrade G.823 ETSI 300-166 • LEDs for immediate visual status 300-233 Single Fiber Products TBR12/12 Recommended use in pairs • Supports dual or single fiber Copper Connectors RJ-48, BNC S6010-1029-A1 • Supports multimode and single mode Fiber Connectors SFP: LC connector Uses standard 100BASE-X/OC-3 SFP Fixed Optics: ST or SC connector Twisted Pair (RJ-48) [1.5 km/0.9 mi.] fiber at a variety of distances to 1310nm TX /1550nm RX single fiber SM (SC) Data Rates T1 = 1.544 Mbit/s, E1 = 2.048 Mbit/s [20 km/12.4 mi.] • Supports CWDM SFPs Status LED Power, Signal Detect Copper, Signal Detect Fiber Link Budget: 19.0 dB • SNMP management when used with Dimensions W: 3.25” [82 mm]; D: 6.5” [165 mm]; H: 1.0” S6010-1029-A2 ION™ chassis and management module [25 mm] Twisted Pair (RJ-48) [1.5 km/0.9 mi.] to 1550nm TX /1310nm RX single fiber SM (SC) • Remote standalone can be managed Power Consumption : 2.6 Watts [20 km/12.4 mi.] Input: 100-240 VAC Link Budget: 19.0 dB by local peer Output: 12 VDC • Extend PRI over fiber Environment Operating: -10°C to 65°C Altitude: 0-10,000 Feet *SFP port uses standard 100BASE-x/oc-3 SFP Humidity: 5-95% (non-condensing) Weight 2 lbs. [0.90 kg] Compliance CISPR/EN55022 Class A; FCC Class A; CE Mark, UL60950 MTBF With Power Supply: Greater than 41,660 hours (MIL-HDBD-217F) Greater than 114,580 hours (Bellcore) Without Power Supply: Greater than 250,000 hours (MIL-HDBD-217F) Greater than 687,000 hours (Bellcore) Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 64 For a Chassis Card version, see C6110 Series [ pg 20 ] S6110 Series Stand-alone T1/E1/J1 Network Interface Device 4xT1/E1/J1 over Fiber

The ION™ 4xT1/E1/J1 copper to fiber network interface device (NID) provides a solution for those users that need to extend multiple T1/E1 connections over fiber. Ordering Information S6110-1011 The ION™ 4xT1/E1/J1 supports Small Form Pluggable (SFP) transceivers to 1300nm multimode (ST) [2 km/1.2 mi.] support a variety of fiber types, distances and wavelengths to provide maximum Link Budget: 11.0 dB flexibility across a variety of network topologies. to (4) RJ-48 [1.5 km/0.9 mi.] The use of Coarse Wave Division Multiplexing (CWDM) SFPs can be utilized S6110-1013 to further increase the bandwidth capacity of the fiber infrastructure. 1300nm multimode (SC) [2 km/1.2 mi.] Link Budget: 11.0 dB The ION™ 4xT1/E1/J1 NID must be used in pairs. A typical installation will to (4) RJ-48 [1.5 km/0.9 mi.] include a chassis card installed in the ION™ Platform locally and a stand- S6110-1013 alone device installed at the remote location. S6110-1014 1310nm single mode (SC) [20 km/12.4 mi.] Link Budget: 16.0 dB Features Hardware and Performance Specifications to (4) RJ-48 [1.5 km/0.9 mi.] S6110-1040 • 4 x RJ-48 copper interfaces Standards ANSI T1.102 T1.403 1 *SFP port (Empty) to (4) RJ-48 [1.5 km/0.9 mi.] • 1 fiber interface (fixed or SFP) T1.408 ITU I.431 2 SFP ports on S6111-1040 model S6111-1040 G.703 2 *SFP ports (Empty) G.736 • Loopback via test set to (4) RJ-48 [1.5 km/0.9 mi.] G.775 • Local and remote loopbacks G.823 ETSI 300-166 Single Fiber Products • LEDs for device status and 300-233 TBR 12/13 troubleshooting AT&T Pub 62411 S6110-1029-A1 • Settings for line code, line build out, Switches Numerous switch settings for line coding, line build 1310nm TX/1550nm RX single fiber single loopbacks and Alarm Indication Signal out, loopback and AIS mode (SC) [20 km/12.4 mi.] (AIS) Data Rate Copper ports (RJ-48): T1(J1) = 1.544Mb/s, Link Budget: 19.0 dB E1 = 2.048Mb/s to (4) RJ-48 [1.5 km/0.9 mi.] • Access to complete status and SFP port(s) (empty): 100BASE-X/OC-3 S6110-1029-A2 configuration on local and remote Status LEDs Power, Port Status, Loopback and AIS 1550nm TX/1310nm RX single fiber single device mode (SC) [20 km/12.4 mi.] Dimensions Width: 3.7” [94 mm] Link Budget: 19.0 dB • Remote firmware upgrade Depth: 6.5” [165 mm] to (4) RJ-48 [1.5 km/0.9 mi.] Height: 1.8” [46 mm] • Remote management Input Power AC: 12 VDC via barrel connector using 100- 240VAC, UL listed power supply Optional Accessories (sold separately) • Extended operating temperature Power Consumption 6W max for dual fiber model, 5.5W max SFP Modules for single fiber model Wide Input (24 - 60VDC) Power Supplies Environment Operating : -10°C to 65°C Storage: -40°C to +85°C SPS-2460-SA Operating Humidity: 5% to 95% (non condensing) Stand-Alone Power Supply Safety EN55022 Class A, EN55024, CE mark Weight 2 lbs. (0.90 kg) Mounting Options Warranty Lifetime WMBL Wall Mount Bracket 4.0” [102 mm]

*SFP port uses standard 100BASE-x/oc-3 SFP

Applications • T1/E1/J1 extension over fiber • Mobile backhaul • Business customers

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 65 For a Chassis Card version, see C6120 Series [ pg 21 ] S6120 Series Stand-alone T1/E1/J1 Network Interface Device 4xT1/E1/J1 + 10/100 Ethernet over Fiber

The ION™ 4xT1/E1/J1 copper to fiber network interface device (NID) provides a solution for those users that need to extend multiple T1/E1 connections and 10/100Mbps Ethernet over fiber. Ordering Information S6120-1011 The ION™ 4xT1/E1/J1 supports Small Form Pluggable (SFP) 1300nm multimode (ST) [2 km/1.2 mi.] transceivers to support a variety of fiber types, distances and wavelentgths Link Budget: 11.0 dB to provide maximum flexibility across a variety of network topologies. to (4) RJ-48 [1.5 km/0.9 mi.] The use of Coarse Wave Division Multiplexing (CWDM) SFPs can be utilized to plus 10/100BASE-TX (RJ-45) [100m] further increase the bandwidth capacity of the fiber infrastructure. S6120-1013 1300nm multimode (SC) [2 km/1.2 mi.] The ION™ 4xT1/E1/J1 NID must be used in pairs. A typical installation will Link Budget: 11.0 dB S6120-1013 include a chassis card installed in the ION™ Platform locally and a stand- to (4) RJ-48 [1.5 km/0.9 mi.] alone device installed at the remote location. plus 10/100BASE-TX (RJ-45) [100m] S6120-1014 1310nm single mode (SC) [20 km/12.4 mi.] Features Specifications Link Budget: 16.0 dB • 4 x RJ-48 copper interfaces Standards ANSI T1.102 to (4) RJ-48 [1.5 km/0.9 mi.] T1.403 and T1.408 plus 10/100BASE-TX (RJ-45) [100m] • 1 fiber interface (fixed or SFP) ITU I.431 G.703 S6120-1040 1 *SFP port (Empty) to (4) RJ-48 • 2 SFP ports on S6121-1040 model G.736 G.775 [1.5 km/0.9 mi.] plus 10/100BASE-TX (RJ-45) [100m] • 1 RJ-45 10/100Mbps Ethernet port G.823 ETSI 300-166 S6121-1040 • Auto-MDI/MDIX 300-233 2 *SFP ports (Empty) to (4) RJ-48 TBR 12/13 [1.5 km/0.9 mi.] plus 10/100BASE-TX (RJ-45) • Pause (Flow Control on Ethernet port) AT&T Pub 62411 [100m] IEEE 802.3 • Loopback via test set Switches Numerous switch settings for line coding, line build out, loopback and AIS Single Fiber Products • Local and remote loopbacks Data Rate Copper ports (RJ-48): T1(J1) = 1.544Mb/s, S6120-1029-A1 • LEDs for device status and E1 = 2.048Mb/s 1310nm TX/1550nm RX single fiber SM (SC) troubleshooting Ethernet port (RJ-45): 10/100Mbps [20 km/12.4 mi.] LB: 19.0 dB SFP port(s) (empty): 100BASE-X/OC-3 to (4) RJ-48 [1.5 km/0.9 mi.] • Settings for line code, line build out, Status LEDs Power, Port Status, Loopback and AIS plus 10/100BASE-TX (RJ-45) [100m] loopbacks and Alarm Indication Signal Dimensions Width: 3.7” [94 mm] S6120-1029-A2 (AIS) Depth: 6.5” [165 mm] 1550nm TX/1310nm RX single fiber SM (SC) Height: 1.8” [46 mm] [20 km/12.4 mi.] LB: 19.0 dB • Access to complete status and to (4) RJ-48 [1.5 km/0.9 mi.] configuration on local and remote Power Consumption 6W max for dual fiber model, plus 10/100BASE-TX (RJ-45) [100m] device 5.5W max for single fiber model Optional Accessories (sold separately) Input Power AC: 12 VDC via barrel connector using 100 • Remote firmware upgrade 240VAC, UL listed power supply SFP Modules

• Remote management Environment Operating: -10°C to 65°C Storage: -40°C to 85°C Wide Input (24 - 60VDC) Power Supplies • Extended operating temperature Operating Humidity: 5% to 95% (non condensing) Safety Compliance EN55022 Class A, EN55024, CE mark SPS-2460-SA Stand-Alone Power Supply Weight 2 lbs. [0.90 kg] Warranty Lifetime Mounting Options WMBL Wall Mount Bracket 4.0” [102 mm]

*SFP port uses standard 100BASE-x/oc-3 SFP Applications • T1/E1/J1 extension over fiber Mobile backhaul • Business customers

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 66 For a Chassis Card version, see C6210 Series [ pg 22 ] S6210 Series Stand-alone DS3-T3/E3 Network Interface Device DS3 – T3/E3 Coax over Fiber

The DS3 – T3/E3 copper to fiber network interface device (NID) provides a solution for those users that need to extend DS3 connections over fiber. Ordering Information The DS3 – T3/E3s supports Small Form Pluggable (SFP) transceivers S6210-3011 to support a variety of fiber types, distances and wavelengths to provide (2) Coax (BNC) to 1300nm multimode (ST) maximum flexibility across a variety of network topologies. The use of [2 km/ 1.2 mi.] Coarse Wave Division Multiplexing (CWDM) SFPs can be utilized to further Link Budget: 11.0 dB increase the bandwidth capacity of the fiber infrastructure. S6210-3013 The DS3 – T3/E3 NID must be used in pairs. A typical installation will include (2) Coax (BNC) to 1300nm multimode (SC) a chassis card installed in the ION™ Platform locally and a stand-alone [2 km/ 1.2 mi.] device installed at the remote location. Link Budget: 11.0 dB S6210-3040 S6210-3014 (2) Coax (BNC) to 1310nm single mode (SC) [20 km/12.4 mi.] Features Specifications Link Budget: 16.0 dB S6210-3040 • AIS (Alarm Indication Signal) Standards ANSI ITU-TS (2) Coax (BNC) to *SFP slot (empty) • Coax Line Build Out ETSI G.823 for jitter tolerance • Switch selectable for DS3/T3 or E3 G.755 for loss of signal Single Fiber Products Recommended use in pairs Coax Connectors 75 ohm coax • Remote firmware upgrade Fiber Connectors SFP: LC connector Uses standard 100BASE-X/OC-3 S6210-3029-A1 SFP Fixed Optics: ST or SC connector (2) Coax (BNC) to 1310nm TX/1550nm • Loopback – Coax and Fiber RX single fiber single mode (SC) Data Rates DS3/T3 = 44.7Mbps; E3 = 34.4Mbps • LEDs for immediate visual status [20 km/12.4 mi.] Status LEDs Power, Coax link status, coax loop-back status, AIS Link Budget: 19.0 dB • Supports dual or single fiber on coax link; Fiber link status, fiber loop-back S6210-3029-A2 status, AIS on fiber link (2) Coax (BNC) to 1550nm TX/1310nm • Supports multimode and single mode Dimensions Width: 3.5” [82 mm] RX single fiber single mode (SC) fiber at a variety of distances Depth: 6.5” [165 mm] [20 km/12.4 mi.] Height: 1.0” [25 mm] Link Budget: 19.0 dB • Supports CWDM SFPs Power Consumption 2.4 Watts • SNMP management when used with Power Input: 100-240 VAC * SFP port uses standard 100BASE-x/oc-3 SFP ION™ chassis and management module Output: 12 VDC • Remote stand alone can be managed Environment Operating: -10°C to +65°C Humidity: 5% to 95% (non condensing) by local peer Altitude: 0-10,000 Feet Weight 2 lbs. [0.90 kg] Compliance CISPR/EN55022 Class A; FCC Class A; CE Mark, UL60950 MTBF With Power Supply: Greater than 41,660 hours (MIL-HDBD-217F) Greater than 114,580 hours (Bellcore) Without Power Supply: Greater than 250,000 hours (MIL-HDBD-217F) Greater than 687,000 hours (Bellcore) Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 67 For a Chassis Card version, see CAPTF33xx-1xx [ pg 36 ] SAPTF33xx-1xx Stand-alone POTS 2-Wire Media Converter POTS 2-Wire Copper to Fiber

Connect central-office voice grade signals to distant Plain Old Telephone equipment (POTS) utilizing standard telephone signaling. Two units are required to implement an end to end system. Unit A connects to Ordering Information a telephone line or PBX and has the ability to detect ringing voltages and Line Side FXS: SAPTF3311-105 to act as a telephone (LINE SIDE FXS). Unit B is the reciprocal unit and has Customer Side FXO: SAPTF3311-115 the ability to act as a Central Office and connects to a telephone device Twisted Pair (RJ-11) [5 km/3.1 mi.] (CUSTOMER SIDE FXO). to 1300nm multimode (ST) [2 km/1.2 mi.] Link Budget: 11.0 dB Devices must be used in pairs. Typical installation will include a chassis card [CAPTF] installed in the Point System™ locally and a stand-alone device Line Side FXS: SAPTF3313-105 Customer Side FXO: SAPTF3313-115 installed at the remote location. Twisted Pair (RJ-11) [5 km/3.1 mi.] SAPTF3311-105 to 1300nm multimode (SC) [2 km/1.2 mi.] Link Budget: 11.0 dB Line Side FXS: SAPTF3314-105 Customer Side FXO: SAPTF3314-115 Features Specifications Twisted Pair (RJ-11) [5 km/3.1 mi.] • Audio Transmission to 1310nm single mode (SC) [20 km/12.4 mi.] Link Budget: 16.0 dB Standards FCC Part 68 • Caller ID TBR21 Single Fiber Products • Automatic Ring Down Analog Port (Telephone Emulation or FXS) Connector: RJ-11 Line Side FXS: SAPTF3329-105* • Duplex or Single Fiber Options Impedance: 600 ohms Customer Side FXO: SAPTF3329-115* REN: 0.48 Twisted Pair (RJ-11) [5 km/3.1 mi.] Loop Current: 20 to 60 ma. to 1310nm TX/1550nm RX single fiber Insertion Loss: 0.0 +/-1.0 dB at 1000 Hz single mode (SC) [20 km/12.4 mi.] when both ports are terminated at 600 ohms Link Budget: 19.0 dB Analog Port (Central Office Emulation or FXO) Impedance: 600 ohms Line Side FXS: SAPTF3329-106* Battery Source: 48 VDC +/- 5V Customer Side FXO: SAPTF3329-116* Ringing Supply: 90 Vp-p Twisted Pair (RJ-11) [5 km/3.1 mi.] Ring Frequency: 15 – 25 Hz. to 1550nm TX/1310nm RX single fiber (Reproduces frequency detected by side A) single mode (SC) [20 km/12.4 mi.] Ring Cadence: Reproduces cadence detected by side A Link Budget: 19.0 dB Insertion Loss: 1.0 +/- 1.0 dB @ 1000 Hz when both ports are terminated at 600 ohms *Note: Single Fiber Products should be paired Voice Frequency 300 Hz – 3 KHz by application:

Optional Jumpers Automatic Ring Down/Normal Loop Extender/Isolator Application Status LEDs LED colors are Green Line Side FXS: CAPTF3329-105 Fiber Link: ON indicates fiber link up; Customer Side FXO: CAPTF3329-116 In Use: ON indicates unit in use; Flashing indicates ringing; Power: ON indicates power is on Dimensions 105 Model: Width: 3.25” [82 mm] Depth: 4.7” [119 mm] Height: 1.0” [25 mm] 115 Model: Width: 3.7” [94 mm] Depth: 4.7” [119 mm] Height: 1.8” [46 mm] Power External AC/DC provided; 12 VDC, 1.25A; unregulated; standard; UL Listed Environment Operating: -10°C to +65°C Storage: -25°C to +85°C Humidity: 5% to 95% (non condensing) Altitude: 0 – 10,000 ft. Weight 2 lbs. [0.90 kg] Compliance Safety: Wall Mount Power Supply: UL Listed and CSA certified Emmisions: FCC Class A; VCCI Class A; EN 55022 (CISPR 22) Class A; ICES 003; CE Mark Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 68 J/RS232-xF-01(xx) Stand-alone RS232 Media Converter RS232 Copper to Fiber

Link a remote terminal to a host computer: Connect multiple devices, such as security scanners, POS devices, remote terminals and building access/alarming systems to a host computer. Ideal for campus or business Ordering Information environments where remote devices can be networked in a point-to-point J/RS232-CF-01 configuration where distances are greater than the 15 meter limitation of DB-9 (female) [15 m/49 ft.] conventional copper serial cables. to 1300nm multimode (ST) [2 km/1.2 mi.] Link Budget: 11.0 dB Transition Networks’ “Just Convert-IT™” serial RS-232 to Fiber Media Converter is an inexpensive, no frills way to extend the distance between J/RS232-CF-01(SC) DB-9 (female) [15 m/49 ft.] serial connections with the use of fiber optic cable. This converter supports to 1300nm multimode (SC) [2 km/1.2 mi.] full or half-duplex data transmission at speeds up to 120 Kbps. Unit and Port Link Budget: 11.0 dB J/RS232-CF-01 LEDs allow for quick status information on the converter. J/RS232-TF-01 DB-9 (male) [15 m/49 ft.] to 1300nm multimode (ST) [2 km/1.2 mi.] Features Specifications Link Budget: 11.0 dB J/RS232-TF-01(SC) Standards EIA/TIA-574 • Offered with either a male or DB-9 (male) [15 m/49 ft.] EIA/TIA RS-232E female connector to 1300nm multimode (SC) [2 km/1.2 mi.] Status LEDs PWR (Power): Lit for normal operation Link Budget: 11.0 dB • Full/Half-duplex transmission RX: Steady = Link; at speeds up to 120 Kbps Flashing = Rx Data Optional Accessories (sold separately) FL: Steady = Fiber Link • Fiber LED lights to show link with Dimensions Width: 3.0” [76 mm] Wide Input (24 - 60 VDC) Power Supplies or without data transmission Depth: 3.9” [100 mm] SPS-2460-SA Height: 1.0” [25 mm] Stand-Alone Power Supply Power Consumption 3.0 Watts Power External AC/DC; 12 VDC, 0.5A min Mounting Options Environment Operating: 0°C to 50°C, E-MCR-05 Humidity: 5% to 95% (non-condensing), 12-Slot Media Converter Rack Altitude: 0 – 10,000 ft. RMS19-SA4-01 Weight 2 lbs. [0.90 kg] 4-Slot Media Converter Shelf Compliance Safety: Wall Mount Power Supply: WMBD UL Listed and CSA certified DIN Rail Bracket 5.0” [127 mm] Emissions: CISPR22/EN55022 Class A + EN55024; EN60950 Class A; FCC Class A; CE Mark WMBD-FS DIN Rail Bracket (flat) 3.1” [79 mm] Warranty Lifetime WMBS Wall Mount Bracket 3.2” [81 mm]

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 69 For a Chassis Card version, see CRS2F311x-100 [ pg 33 ] SRS2F311x-100 Stand-alone RS232 Remotely Managed Media Converter RS232 Copper to Fiber

Link a remote terminal to a host computer: Connect multiple devices, such as security scanners, POS devices, remote terminals and building access/alarming systems to a host computer. Ideal for campus or business Ordering Information environments where remote devices can be networked in a point-to-point SRS2F3111-100 configuration where distances are greater than the 15 meter limitation of DB-9 [15 m/49 ft.] conventional copper serial cables. to 1300nm multimode (ST) [2 km/1.2 mi.] Link Budget: 11.0 dB Transition Networks’ serial RS232 to fiber converter allows you to extend the distance between serial connections with the use of fiber optic cable. This SRS2F3113-100 DB-9 [15 m/49 ft.] full-featured converter transmits the full complement of RS232 flow control/ to 1300nm multimode (SC) handshaking signals optically and supports full or half-duplex asynchronous [2 km/1.2 mi.] data transmission at speeds up to 115 Kbps. Link Budget: 11.0 dB

SRS2F3111-100 The diagnostic features included on this converter make installation easy SRS2F3114-100 and intuitive. A DTE/DCE switch eliminates the frustration over selecting the DB-9 [15 m/49 ft.] appropriate cable. A loopback switch allows for complete diagnostic testing to 1310nm single mode (SC) [20 km/12.4 mi.] prior to system turn-up or during troubleshooting. Unit and Port LEDs allow Link Budget: 16.0 dB for quick status information of the converter.

In addition to status LEDs and switch settings for local management, these Optional Accessories (sold separately) converters can also be managed from remote locations when used in conjunction with a managed Point System™ chassis. Wide Input (24 - 60 VDC) Power Supplies SPS-2460-PS Piggy Back Power Supply SPS-2460-SA Features Specifications Stand-Alone Power Supply • Remote Management Standards EIA/TIA-574, EIA/TIA RS-232E Mounting Options • Local or Remote Loopback on Data Rate 115 Kbps E-MCR-05 12-Slot Media Converter Rack copper and fiber Switches DTE/DCE: Select appropriate position Loopback: Norm = normal operation; • DTE/DCE switch for easy RMS19-SA4-01 Loop = Fiber and copper loop-back 4-Slot Media Converter Shelf installation with straight-through cabling Status LEDs P: (Power): Lit for normal operation WMBD RX: Steady = Copper Link; DIN Rail Bracket 5.0” [127 mm] • Full/Half-duplex asynchronous Flashing = Rx Data FL: Steady = Fiber Link; WMBD-F transmission at speeds up to Flashing = Loop back mode DIN Rail Bracket (flat) 3.3” [84 mm] 115 Kbps Dimensions Width: 3.3” [84 mm] WMBL • Supports the following flow Depth: 4.8” [122 mm] Wall Mount Bracket 4.0” [102 mm] Height: 1.2” [30 mm] control signaling: WMBV 1. DCD - Data Carrier Detect Power Consumption 5.0 Watts Vertical Wall Mount Bracket 5.0” [127 mm] 2. RXD - Receive Data Power External AC/DC; 12 VDC, 0.5A min 3. TXD - Transmit Data Environment Operating: 0°C to 50°C 4. DTR - Data Terminal Ready Humidity: 5% to 95% (non-condensing) 5. SG - Signal Ground Altitude: 0 – 10,000 ft. 6. DSR - Data Set Ready Weight 2 lbs. [0.90 kg] 7. RTS - Request To Send Safety Compliance Wall Mount Power Supply: 8. CTS - Clear To Send UL Listed and CSA certified Compliance Safety: Wall Mount Power Supply:UL Listed and CSA certified Emissions: CISPR22/EN55022 Class A + EN55024; EN60950 Class A; FCC Class A; CE Mark Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 70 For a Chassis Card version, see CRS4F3x1x-100 [ pg 34 ] SRS4F3x1x-100 Stand-alone RS422/485 Media Converter RS422/485 Copper to Fiber

Link a remote terminal to a host computer: Connect multiple devices, such as security scanners, POS devices, remote terminals and building access/alarming systems to a host computer. Ideal for campus or business Ordering Information environments where remote devices can be networked in either a point-to- SRS4F3111-100 point or point to multi-point configuration. DB-9 [1.2 km/0.7 mi.] to 1300nm multimode (ST) [2 km/1.2 mi.] Transition Networks’ serial RS-422/485 to fiber converter allows you to Link Budget: 11.0 dB extend the distance between serial connections with the use of fiber optic SRS4F3111-100 cable. This full-featured converter operates in 2-wire mode for RS-422 and SRS4F3113-100 DB-9 [1.2 km/0.7 mi.] either 2-wire or 4-wire mode for RS-485 and supports full or half-duplex to 1300nm multimode (SC) [2 km/1.2 mi.] data transmission at speeds up to 1.25 Mbps. Link Budget: 11.0 dB SRS4F3114-100 SRS4F3211-100 DB-9 [1.2 km/0.7 mi.] to 1310nm single mode (SC) [20 km/12.4 mi.] Features Specifications Link Budget: 16.0 dB SRS4F3211-100 Standards EIA/TIA RS-422, Terminal Block [1.2 km/0.7 mi.] • RS422 or RS485 operation EIA/TIA RS-485 to 1300nm multimode (ST) [2 km/1.2 mi.] • 2-wire or 4-wire operation Switches SW1: 130 ohm resistor RX (Down = enable) Link Budget: 11.0 dB in RS-485 mode SW2: 130 ohm resistor TX (Down = enable) SW3: 1k ohm “pull-down” (Down = enable) SRS4F3213-100 • Full/Half-duplex transmission SW4: 1k ohm “pull-up” (Down = enable) Terminal Block [1.2 km/0.7 mi.] to 1300nm multimode (SC) [2 km/1.2 mi.] at speeds up to 1.25 Mbps SW5: 2-wire/4-wire (Down = 4-wire) SW6: RS-485/RS-422 (Down = RS-422) Link Budget: 11.0 dB Status LEDs PWR (Power): Lit for normal operation SRS4F3214-100 RXC: Steady = Data RX on copper link; Terminal Block [1.2 km/0.7 mi.] Flashing = RX Data at low speed to 1310nm single mode (SC) [20 km/12.4 mi.] RXF: Steady = Fiber Link Link Budget: 16.0 dB

Dimensions Width: 3.3” [84 mm] Optional Accessories (sold separately) Depth: 4.8” [122 mm] Height: 0.90” [22 mm] Wide Input (24 - 60 VDC) Power Supplies Power Consumption 5.0 Watts SPS-2460-PS Power External AC/DC; 12 VDC, 0.5A min Piggy Back Power Supply Environment Operating: 0°C to 50°C, SPS-2460-SA Humidity: 5% to 95% (non-condensing), Stand-Alone Power Supply Altitude: 0 – 10,000 ft.

Weight 2 lbs. [0.90 kg] Mounting Options Compliance Safety: Wall Mount Power Supply:UL Listed and CSA certified E-MCR-05 Emissions: CISPR22/EN55022; EN55024; EN60950 Class A; 12-Slot Media Converter Rack FCC Class A; CE Mark; UL 1950 Warranty Lifetime RMS19-SA4-01 4-Slot Media Converter Shelf WMBD DIN Rail Bracket 5.0” [127 mm] WMBD-E DIN Rail Bracket (Extended) 4.3”[109 mm] WMBD-F DIN Rail Bracket (flat) 3.3” [84 mm] WMBL Wall Mount Bracket 4.0” [102 mm] WMBV Vertical Wall Mount Bracket 5.0” [127 mm]

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 71 For a Chassis Card version, see CPSVT26xx-10x [ pg 35 ] SPSVT26xx-10x Stand-alone High Speed Serial Remotely Managed Media Converter V.35/X.21/RS449/RS530/RS232 Copper to Fiber

Management Features - Local/Remote Cable type Ordering Information • Report device status to chassis reporting, near end management software - Local/Remote Clock polarity *SPSVT2611-100 - Local Fiber Link status setting 26-pin to 1300nm multimode (ST) [2 km/1.2 mi.] - Local/Remote Hardware/ Link Budget: 11.0 dB Software mode • Write operation includes: - Local/Remote Speed select - Local or Remote Loopback SPSVT2613-100 - Local or Remote Speed Select 26-pin to 1300nm multimode (SC) [2 km/1.2 - Local/Remote Loopback mi.] SPSVT2611-100 Link Budget: 11.0 dB *SPSVT2614-100 Features Specifications 26-pin to 1310nm single mode (SC) [20 km/12.4 mi.] • Connect High Speed Serial signals Standards ITU-T ISO-2593 Link Budget: 16.0 dB on copper to fiber Data Rate 1.2 Kbps to 10 Mbps Optional Accessories (sold separately) • Supports multiple protocols through Switches - 0 – TT = Receive CLK - 8 – 768 Kbps the use of a universal 26-pin serial - 1 – 56 Kbps - 9 – 1.024 Mbps interface connector - 2 – 64 Kbps - A – 1.544 Mbps - 3 – 112 Kbps - B – 2.048 Mbps Cable Assemblies • Extend the point of presence of a - 4 – 128 Kbps - C to 3.072 Mbps 21DCE-3

copper V.35/X.21/RS449/RS530/RS232 - 5 – 256 Kbps - D – 4.096 Mbps DB-15 (FT) (26-pin) to (DCE) [3 m/10 ft.] connection at data rates up to 10 Mbps. - 6 – 384 Kbps - E – 6.144 Mbps - 7 – 512 Kbps - F – Asynchronous Mode 21DTE-3 • In-band Remote Management when DB-15 (MT) (26-pin) to (DTE) [3 m/10 ft.] used in conjunction with Point Side panel, external DCE speed switch, sixteen position: Speeds can also be set 530DCE-3 System™ card on DCE devices locally or remotely via software DB-25 (FT) (26-pin) to (DCE) [3 m/10 ft.] Front Panel, Loop-back Selector • Operational speeds up to 10 Mbps 530DTE-3 Switch: Right Position: Loop Fiber Back & DB-25 (MT) (26-pin) to (DTE) [3 m/10 ft.] Loop Copper Back Left Position: Normal Operation • Copper & Fiber Loopback Internal Jumpers Jumper (J4): Hardware: The terminal • Synchronous or asynchronous timing switch controls the terminal Wide Input (24 - 60 VDC) Power Supplies timing function. The loop-back capability SPS-2460-PS switch controls the loop-back function. Piggy Back Power Supply • Selectable DCE speeds Software: The terminal timing switch and the loopback switch are disabled. SPS-2460-SA • LED indications for Lock, Loopback & These two functions are Stand-Alone Power Supply Data controlled by the most recently saved, on-board micro processor settings. • Use a combination of any copper Jumper (J6): RX Clock Polarity: Set to Mounting Options interface: (RS449 to V.35, RS530 to sample the receive data on the rising or falling edge of the receive clock. E-MCR-05 X.21, DTE-DTE, DTE-DCE, DCE-DCE, Jumper (J7): TX Clock Polarity: Set to 12-Slot Media Converter Rack etc.) All interfaces converted at the sample the transmit data on the rising or physical level. falling edge of the receive clock. WMBD DIN Rail Bracket 5.0” [127 mm] Status LEDs The Copper LED uses a green LED Smart Serial Link: Green - Link is up; WMBD-F Green Flashing - In loop-back mode; DIN Rail Bracket (flat) 3.3” [84 mm] Copper Distances Fiber: Green - Link is up; Green Flashing - In loop-back mode; Standard Range* WMBL Power: Green - ON power applied to board Wall Mount Bracket 4.0” [102 mm] RS232/V.24 15 m Dimensions Width: 3.25” [82 mm] RS449/V.36 1.2 km WMBV Depth: 4.8” [120 mm] V.35 600 m Vertical Wall Mount Bracket 5.0” [127 mm] X.21 1.2 km Height: 1.0” [25 mm] RS530 1.2 km Power Consumption: 5.0 Watts RMS19-SA4-01 *For reference only. Contact Transition Networks External AC/DC required; 12 VDC; 1A; 4-Slot Media Converter Shelf for detailed range information. regulated wall mount adapter via 2 mm connector * Product is in BTO status and is built on a per order Environment Operating: 0°C to 50°C, basis. Please contact a Transition Networks sales Humidity: 5% to 90% (non-condensing), associate for details and lead times. Altitude: 0 – 10,000 ft. Weight 2 lbs. [0.90 kg] Compliance Safety: Wall Mount Power Supply:UL Listed and CSA certified Emissions: CISPR/EN55022, EN55024, EN60950 Class A; FCC Class A; CE Mark Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 72 Mini Media Converters Provide Entry-Level Conversion, Ideal for Applications where Physical Space is Limited

• Entry level, cost effective media conversion • Perfect for remote connections at the network edge • Can be deployed back to back over fiber or as single stand-alone units • Compact design for installations with space constraints

Mini Media Mini Media Fiber Switch Converter Converter Fiber Switch

Mini Media Converter Desktop Computer

Core Fiber Switch

Mini Media Converter Desktop Computer

Mini Media Fiber Switch Converter Remote Network Camera Eclosure

Features:

• Plug and Play fixed network configuration

• No dip-switches or configuration required

• Provides options for SC, ST, & LC fiber interfaces

• Supports, 100M, 10/100, 1000M, & 10/100/1000 Networks

• Includes external AC power supply M/E-PSW-FX-02 - USB power available on some models

73 M/E-TX-FX-01 Mini Fast Ethernet Media Converter 100Base-TX to 100Base-FX

The Fast Ethernet Mini Media Converter provides cost effective, entry- level media conversion for physical layer fiber integration into copper based environments. With its fixed configuration, deployment is easy, Ordering Information just plug and play, and with its small size, it is ideal for locations where M/E-TX-FX-01 space is at a premium. 100BASE-TX (RJ-45) [100m/328 ft.] to 100BASE-FX 1300nm multimode (ST) [2km/1.2mi.] Link Budget: 11.0db M/E-TX-FX-01(SC) 100BASE-TX (RJ-45) [100m/328 ft.] to 100BASE-FX 1300nm multimode (SC) M/E-TX-FX-01 [2km/1.2mi.] Link Budget: 11.0db M/E-TX-FX-01(SM) 100BASE-TX (RJ-45) [100m/328 ft.] Features Specifications to 100BASE-FX 1310nm single mode(SC) • Fiber Integration: Used in pairs or as a Standards IEEE 802.3u [20km/12.4mi.] 100Base-TX Link Budget: 16.0db single unit, this mini media converter 100Base-FX will ease the integration of fiber optic M/E-TX-FX-01(SFP) cabling into copper-rich fast Ethernet Status LEDs PWR (Power) below RJ-45: On = Power 100BASE-TX (RJ-45) [100m/328 ft.] FX-Link/Act (Fiber Link / Activity) Upper Left on RJ- to 100BASE-X SFP Slot (empty) environments 45: On = link, Flashing = Activity TX-Link/Act (Copper Link / Activity) Upper Right on M/E-TX-FX-01(100) • Extend Network Distance: Fiber RJ-45: On = link, Flashing = Activity 100BASE-TX (RJ-45) [100 m/328 ft.] supports the transmission of fast to 100BASE-FX 1310nm TX/1550nm RX Dimensions Width: 1.8” [46mm] Ethernet data over much longer single fiber single mode (SC) [20 km/12.4 mi.] Depth: 3.3” [85mm] LB: 19.0 dB distances than is possible twisted pair Height: 0.85 [22mm] M/E-TX-FX-01(101) • Low-Latency Design: As a layer-1 Power Consumption: 2.6 watt 100BASE-TX (RJ-45) [100 m/328 ft.] design, this mini converter will Sources: External AC/DC required; +12VDC, 0.5A to 100BASE-FX 1550nm TX/1310nm RX Input: 7.5VDC to 13.9VDC retransmit fast Ethernet signals single fiber single mode (SC) [20 km/12.4 mi.] without any store-and–forward packet Environment Operating: 0°C to 50 °C LB: 19.0 dB inspection delays found in other layer-2 Storage: -15°C to 65 °C Altitude: 0 – 10,000 feet Optional Accessories (sold separately) devices Humidity: 5% to 95% (non-condensing) Wide Input DC Power Supply • Small Size: Ideal for conversion Weight 2 lbs. [0.90 kg] SPS-2460-SA locations where available space is at a Safety Compliance Wall Mount Power Supply, UL Listed, 24VDC premium - 65% smaller than standard C-UL Listed (Canada) to 60VDC input Stand-alone media converter Compliance Safety: Wall Mount Power Supply:UL Listed, Power Supply C-UL Listed (Canada) Warranty Lifetime Mounting Options WMBM Wall Mount Bracket for Mini Applications RMBM Rack Mount Bracket for Mini, use with • Connect Legacy Networking Equipment RMS19-SA4-01 and/or E-MCR-05 Connect an existing 10 Mbps device to 100 Mbps devices. • Eliminate Collision Domains Separate Collision Domains while linking two half-duplex hubs with a collision free full-duplex connection over fiber. The Mini Media Converters provide a cost-effective method for integrating fiber optic cabling into a 100Base environment. With its miniature size, the Mini offers a space saving alternative while it converts copper to fiber with the smallest footprint available in the industry.

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 74 M/E-PSW-FX-02(xx) Mini Fast Ethernet Media Converter 10/100Base-TX to 100Base-FX

Compliance Safety: Wall Mount Power Supply: Optional Accessories (sold separately) UL Listed, C-UL Listed (Canada) FCC Class A, CISPR22/EN55022 Wide Input Power Supplies Class A, EN55024, CE Mark SPS-2460-SA Warranty Lifetime Mounting Options WMBM Wall Mount Bracket for Mini RMBM Rack Mount Bracket for use with Applications RMS19-SA4-01 and/or E-MCR-05 • Connect Legacy Networking Equipment Connect an existing 10 Mbps device to 100 Mbps devices. • Eliminate Collision Domains Separate Collision Domains while linking two half-duplex hubs with a collision free full-duplex connection over fiber. The Mini Media Converters provide a cost-effective method for integrating fiber optic cabling into a 10/100 UTP environment. With its miniature size, the Mini offers a space saving alternative while it converts copper to fiber with the smallest footprint available in the industry.

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 75 M/GE-T-xX-01 Mini Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX

The Mini Media Converters provide a cost-effective method for integrating fiber optic cabling into a Gigabit UTP environment. With its miniature size, the Mini offers a space saving alternative while it converts copper to fiber with Ordering Information the smallest footprint available in the industry. M/GE-T-SX-01 1000BASE-T (RJ-45) [100m/328 ft.] to 1000BASE-SX 850nm MM (SC) [62.5/125 µm fiber: 220 m/722 ft.] [50/125 µm fiber: 550 m/1804 ft.] Link Budget: 7.0 dB M/GE-T-LX-01 1000BASE-T (RJ-45) [100m/328 ft.] to 1000BASE-LX 1310m SM (SC) M/GE-T-SX-01 [10 km/6.2 mi.] Link Budget: 10.5db M/GE-T-SFP-01 1000BASE-T (RJ-45) [100m/328 ft.] to to SFP slot (empty)

Optional Accessories (sold separately) Features Specifications SFP Modules • Auto-Negotiation Standards IEEE 802.3z IEEE 802.3ab Wide Input DC Power Supply • Auto-MDI/MDIX Status LEDs PWR (Power) below RJ-45: On = Power SPS-2460-SA FX-Link/Act (Fiber Link / Activity) Upper Left on RJ- 24VDC to 60VDC input Stand-alone • Automatic Link Restoration 45: On = link, Flashing = Activity Power Supply TX-Link/Act (Copper Link / Activity) Upper Right on • Interoperable with other RJ-45: On = link, Flashing = Activity 1000Base-T/SX/LX NICs or switch ports Dimensions Width: 1.8” [46mm] Mounting Options • Status LEDs for easy monitoring Depth: 3.3” [85mm] Height: 0.85 [22mm] WMBM Wall Mount Bracket for Mini • Supports SFP modules Power Consumption: 2.6 watt Sources: External AC/DC required; +12VDC, 0.5A RMBM • Supports Jumbo Frames up to Input: 7.5VDC to 13.9VDC Rack Mount Bracket for Mini, use with RMC190SA4-01 and/or E-MCR-05 13312bytes Environment Operating: 0°C to 50 °C • 65% smaller than standard media Storage: -15°C to 65 °C Altitude: 0 – 10,000 feet converter Humidity: 5% to 95% (non-condensing) Weight 2 lbs. [0.90 kg] Compliance Safety: Wall Mount Power Supply, UL Listed, C-UL Listed (Canada) FCC Class A, CISPR22 / EN55022 Class A, EN55024, CE Mark Warranty Lifetime

Applications • Fiber Integration: Used in pairs or as a single unit, this mini media converter will ease the integration of fiber optic cabling into copper-rich GigabitEthernet environments • Extend Network Distance: Convert 1000Base-T ports over to 1000Base- SX/LX on a port-by-port basis. Fiber supports the transmission of GigabitEthernet data over much longer distancesthan is possible twisted pair • Low-Latency Design: As a layer-1 design, this Mini converter willretransmit Gigabit Ethernet signals withoutany store-and–forward packet inspectiondelays found in other layer-2 devices • Space Saving Design: Ideal for conversion locations where available space is at a premium

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 76 M/GE-PSW-xX-01 Mini Gigabit Ethernet Media Converter 10/100/1000Base-T to 1000Base-SX/LX

The Mini Media Converters provide a cost-effective method for integrating fiber optic cabling into a 10/100/1000 UTP environment. With its miniature size, the Mini offers a space saving alternative while it converts copper to Ordering Information fiber with the smallest footprint available in the industry. M/GE-PSW-SX-01 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] to 1000BASE-SX 850nm multimode (SC) [62.5/125 µm fiber: 220 m/722 ft.] Link Budget: 7.0 dB [50/125 µm fiber: 550 m/1804 ft.] Link Budget: 7.0 dB M/GE-PSW-LX-01 M/GE-PSW-SX-01 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] to 1000BASE-LX 1310nm SM (SC) [10 km/6.2 mi.] Link Budget: 10.5 dB Features Specifications M/GE-PSW-LX-01(100) Standards IEEE 802.3 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] • Unit & Port LEDs allow for quick status to 1000BASE-LX 1310nm TX/1550nm RX information Max Frame Size untagged: 1632 bytes single fiber single mode (SC) [20 km/12.4 mi.] tagged: 1628 bytes Link Budget: 13.0 dB • Auto-Negotiation Status LEDs PWR (Power): (below RJ-45) M/GE-PSW-LX-01(101) ON = Lit for normal operation 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] • Fixed Full-Duplex on fiber FX-Link/Act (Fiber Link/Activity): to 1000BASE-LX 1550nm TX/1310nm RX (Upper Left on RJ-45) • Auto-MDI/MDIX single fiber single mode (SC) [20 km/12.4 mi.] ON = Link; Flashing = Activity Link Budget: 13.0 dB • Fixed Link Pass Through TX-Link/Act (Copper Link/Activity): (Upper Right on RJ-45) • Automatic Link Restoration ON = Link; Flashing = Activity Dimensions Width: 1.8” [46 mm] Optional Accessories (sold separately) Depth: 3.3” [85 mm] Height: 0.85” [22 mm] Wide Input (24 - 60 VDC) Power Supply Power Consumption: 3.15 Watts Sources: Unit accepts 5 VDC to 28 VDC SPS-2460-SA Wall Mount AC adapter: 12 VDC 400mA Stand-Alone Power Supply Environment Storage: -15 to +65 °C Operating: 0°C to 50°C Mounting Options Altitude: 0 – 10,000 feet WMBM Humidity: 5% to 95% (non-condensing) Wall Mount Bracket for Mini Weight 2 lbs. [0.90 kg] RMBM Compliance Safety: Wall Mount Power Supply, UL Listed, Rack Mount Bracket for Mini Media Converters C-UL Listed (Canada) in the RMS19-SA4-01 and/or E-MCR-05 FCC Class A, CISPR22/EN55022 Class A, EN55024, CE Mark Note: Long Haul SM and Single Strand SM are Warranty Lifetime available upon request.

Applications • Connect Legacy Networking Equipment: Connect an existing 10/100 Mbps device to 1000 Mbps devices. • Space Saving Design: Ideal for converson locations where available space is limited or at a premium.

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 77 M/GE-PSW-SFP-01 Mini Gigabit Ethernet Media Converter 10/100/1000Base-T to 1000Base-X

The Mini Media Converter provides a cost-effective method for integrating fiber optic cabling into a 10/100/1000 UTP environment. With its miniature size, the Mini offers a space saving alternative while converting copper to Ordering Information fiber. M/GE-PSW-SFP-01 10/100/1000Base-T (RJ-45) [100 m/328 ft.] to 100/1000Base-X SFP Slot (empty) The M/GE-PSW-SFP-01 provides one 10/100/1000 RJ-45 port and one dual speed Small Form Factor (SFP) hot-pluggable port with autosense, with 100M or 1000M SFP transceivers. A wide variety of SFP optical transceivers Optional Accessories (sold separately) is available to offer a full range of deployment options over multimode or USBC-AM-DC single mode fiber. making this mini the ideal solution for fiber integration in USB 2.0 cable male to barrel connector both Fast Ethernet and Gigabit Ethernet environments. M/GE-PSW-SFP-01 WMBM Features Specifications Wall Mount Bracket for Mini • Ports Standards IEEE 802.3z IEEE 802.3ab RMBM - 10/100/1000 RJ-45 Rack Mount Bracket for mini Converters in the Status LEDs PWR (Power) below RJ-45: On = Power - Dual speed 100/1000 open SFP RMS19-SA4-01 and/or E-MCR-05 FX-Link/Act (Fiber Link / Activity) Upper Left on • Unit & Port LEDs allow for quick status RJ-45: On = link, Flashing = Activity information TX-Link/Act (Copper Link / Activity) Upper Right on RJ-45: On = link, Flashing = Activity • Auto-Negotiation Dimensions Width: 1.8” [46mm] Depth: 3.3” [85mm] • Fixed Full-Duplex on Fiber Height: 0.85 [22mm] • Auto-MDI/MDIX Power Consumption 2.4 Watts Power Sources External AC/DC required; +12VDC, 0.5A • Automatic Link Restoration Power Input 4.5VDC to 14VDC • Jumbo Frame (up to 10240Bytes) Environment Operating: 0°C to 50 °C Storage: -15°C to 65 °C • USB Power Option, requires the Altitude: 0 – 10,000 feet standard Humidity: 5% to 95% (non-condensing) • USB to DC barrel connector cable Weight 2 lbs. [0.90 kg] Compliance Safety: Wall Mount Power Supply, UL Listed, C-UL Listed (Canada) FCC Class A, CISPR22 / EN55022 Class A, EN55024, CE Mark Safety Compliance Wall Mount Power Supply, UL Listed, C-UL Listed (Canada) Compliance FCC Class A, CISPR22 / EN55022 Class A, EN55024, CE Mark Warranty Lifetime

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 78 M/E-ISW-FX-01(xx) & M/E-ISW-FX-01AC(xx) Hardened Mini Fast Ethernet Media Converter 10/100Base-TX to 1000Base-FX

Industrial Mini Media Converters provide a cost-effective method for integrating Features fiber optic cabling into industrial or outdoor • Unit and Port LEDs provide • Far-End-Fault (FEF) 10/100 UTP Ethernet networks. Featuring quick status wide operating temperature range, low- • DC and AC powered models • Auto-Negotiatio voltage power, multiple mounting methods • Overload Current Protection and Transition Networks’ Lifetime Warranty • Fixed Full-Duplex on fiber these problem solvers are guaranteed to be trouble-free in harsh outdoor or industrial • Auto-MDI/MDIX • Reverse Polarity Protection applications. • Link Pass Through M/E-ISW-FX-01 • Automatic Link Restoration

Applications • Easily integrate fiber into industrial, hardened or outdoor locations to Ordering Info [AC] = AC powered option available reach devices at the edge of the network. [Extending Ethernet over fiber to M/E-ISW-FX-01 or M/E-ISW-FX-01-AC outdoor security cameras] M/E-ISW-FX-01 M/E-ISW-FX-01AC (SC) 10/100BASE-TX (RJ-45) [100 m/328 ft.] 10/100BASE-TX (RJ-45) [100 m/328 ft.] • Tiny mnechanical size: Allows media conversion within industrial to 100BASE-FX 1310 nm multimode (ST) [2 to 100BASE-FX 1310 nm multimode (SC) [2 km/1.2 mi.] enclosures, where space is at a premium. km/1.2 mi.] Link Budget: 14.0 dB Link Budget: 14.0 dB M/E-ISW-FX-01 (100) M/E-ISW-FX-01AC (SM) • No Configuration Required: These media converters are plug-and-play for 10/100BASE-TX (RJ-45) [100 m/328 ft.] 10/100BASE-TX (RJ-45) [100 m/328 ft.] transparent operation within your existing network. to 100BASE-FX 1310nm TX/1550nm RX single to 100BASE-FX 1310 nm SM (SC) [20 km/12.4 fiber single mode (SC) [20 km/12.4 mi.] mi.] • The Industrial Mini is available with LC, ST or SC fiber interfaces and is Link Budget: 18.0 dB Link Budget: 19.0 dB available for multimode or single mode fiber. Single fiber options are also M/E-ISW-FX-01 (101) M/E-ISW-FX-01AC (SMLC) available 10/100BASE-TX (RJ-45) [100 m/328 ft.] 10/100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1550nm TX/1310nm RX single to 100BASE-FX 1550 nm SM (LC) [20 km/12.4 fiber single mode (SC) [20 km/12.4 mi.] mi.] Link Budget: 18.0 dB Link Budget: 19.0 dB M/E-ISW-FX-01 (102) 10/100BASE-TX (RJ-45) [100 m/328 ft.] Optional Accessories (sold separately) Specifications to 100BASE-FX 1310nm TX/1550nm RX single Standards IEEE 802.3 fiber single mode (SC) [40 km/24.9 mi.] AC Power Supplies Link Budget: 26.0 dB Status LEDs PWR (Power): (below RJ-45) SPS-UA12DHT FX-Link/Act (Fiber Link/Activity): M/E-ISW-FX-01 (SC) (100-240 VAC input (Upper Left on RJ-45) 10/100BASE-TX (RJ-45) [100 m/328 ft.] 0°C to +70°C Operating temperature) ON = Link; Flashing = Activity to 100BASE-FX 1310 nm multimode (SC) [2 25083 TX-Link/Act (Copper Link/Activity): km/1.2 mi.] Universal AC/DC Input DIN Rail Mountable (Upper Right on RJ-45) Link Budget: 14.0 dB +12 VDC Power Supply ON = Link; Flashing = Activity M/E-ISW-FX-01 (SM) Dimensions Width: 1.8” [46 mm] 10/100BASE-TX (RJ-45) [100 m/328 ft.] Mounting Options Depth: 3.3” [85 mm] to 100BASE-FX 1310 nm SM (SC) [20 km/12.4 Height: 0.85” [22 mm] mi.] WMBM Power Consumption: 2.5 Watts Link Budget: 19.0 dB Wall Mount Bracket for Mini Converters Sources: 12-48 VDC M/E-ISW-FX-01 (SMLC) AC version also supports 22-36 VAC ± 10% 10/100BASE-TX (RJ-45) [100 m/328 ft.] RMBM Overload Current Protection to 100BASE-FX 1310 nm SM (LC) Rack Mount Bracket for Mini Media Reverse Polarity Protection [20 km/12.4 mi.] Converters in the RMS19-SA4-01 Environment Storage: -40°C to 85°C Link Budget: 19.0 dB and/or E-MCR-05 Operating: -40°C to 75°C M/E-ISW-FX-01AC Altitude: 0 – 10,000 feet 10/100BASE-TX (RJ-45) [100 m/328 ft.] Humidity: 5% to 95% (non-condensing) to 100BASE-FX 1310 nm multimode (ST) [2 Weight 2 lbs. [0.90 kg] km/1.2 mi.] Link Budget: 14.0 dB Compliance FCC Class A, CISPR22/EN55022 Class A, EN55024, CE Mark M/E-ISW-FX-01AC (MMLC) 10/100BASE-TX (RJ-45) [100 m/328 ft.] Warranty Lifetime to 100BASE-FX 1310 nm multimode (LC) [2 km/1.2 mi.] Link Budget: 11.0 dB

Transition Networks Inc. +1.952.941.7600 [email protected] www.transition.com 79 80

NORTH AMERICA EUROPE LATIN AMERICA ASIA

Worldwide Headquarters EMEA / European Headquarters Mexico / Central America / Caribbean Japan / Korea tel: +44 (0) 1428 752 955 tel: +1 952.996.1512 tel: +81 3 5403 6470 United States fax: +44 (0) 1428 752 901 fax: +1 952.941.2322 fax: +81 3 5403 6471 tel: 952.941.7600 toll free: 800.526.9267 South America Southeast Asia / fax: 952.941.2322 tel: +54 11 4554 8076 Hong Kong / India fax: +1 952.941.2322 Canada tel: +65 9736 8385 fax: +1 952.941.2322 tel: +1 952.996.1550 Brazil fax: +1 952.941.2322 tel: +55-11-98244-7630 fax: +1 952.941.2322

part: 902015MC