Levele™ ELEVATOR INTERIORS

LEVELe™ ELEVATOR INTERIORS

PRODUCTTECHTECH BRIEFBRIEF DATA ® LEVELe ELEVATOR INTERIORS PRODUCT DATA

LEVELe Elevator Interiors were designed with the requirements of today's buildings in mind. LEVELe evolves the CabForms® program, introduced more than ten years ago, with greater energy efficiency, and an expanded range of material and handrail options. Self-revealing extrusion channels, aluminum panel frames, and a structural backer come together to create a lightweight system that is easy to install and maintain. LEVELe Elevator Interiors can be configured to meet the needs of any new equipment or modernization project. Complete packages are available for all typical sizes of passenger and service cabs, single or double opening.

STANDARD COMPONENTS - Wall Panels, Bases, Reveals, Installation Hardware OPTIONAL COMPONENTS - Handrails, Ceiling with Light Fixtures, Emergency Lighting Power Source

PANEL & COMPONENT DETAILS WALL PANELS • LEVELe elevator walls are assembled using a series of individual wall panels whose sizes and shapes vary depending on the particular model selected. Each individual wall panel comprises two distinct, configurable elements: panel frames and insets. • Panel frames serve as the visible framing elements that surround the insets and also incorporate LEVELe’s innovative wall panel attachment system. Panel frames are extruded aluminum and are available in a choice of Clear, Black, Antique Bronze or Duranodic Bronze anodized finishes. The Minimal panel frame’s extruded profile provides a 0.11" (2.8 mm) wide edge border around each inset and a preset 0.025" (0.635 mm) reveal between adjoining panels. The Capture panel frame is available for thicker, heavier materials, such as glass, or to provide the look of a wider frame. The extruded profile of the Capture panel frame is provides a 0.23" (5.8 mm) wide edge border around each inset and a preset 0.025" (0.635 mm) reveal between adjoining panels. All panel frame corners are mitered. • Insets consist of a decorative face material bonded to a fire-rated substrate. Total wall panel thickness including panel frames 0.94" (23.9 mm) for Minimal panel frames and 1.14" (29.0 mm) for Capture panel frames.

MINIMAL PANEL FRAME DETAIL CAPTURE PANEL FRAME DETAIL BASES REVEALS A 3.5" (88.9 mm) high base is fitted 90° angled reveals are supplied for the between the finished floor and the wall cab rear corners; flat reveal strips are panels. Bases consist of Stainless Steel supplied for front corners. Corner reveals or Fused Metal decorative faces applied are aluminum and are available in a choice to an extruded aluminum substrate with of Clear or Black anodized finishes. 0.11 in

0.23 in pre-mounted adhesive. Reveals are applied with pre-mounted (2.8 mm) (5.8 mm) adhesive.

0.11 in 0.23 in (2.8 mm) (5.8 mm)

PANEL FRAME COLOR OPTIONS

Panel frames are extruded aluminum and are available in a choice of Clear, Black, Antique Bronze or Duranodic Bronze anodized finishes.

Clear Black Antique Bronze Duranodic Bronze

T 1.800.451.0410 | F 412.781.7840 | www.forms-surfaces.com

© 2016 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.

page 1 of 8 | Rev. 12-09-16 ® LEVELe ELEVATOR INTERIORS PRODUCT DATA

STANDARD MODELS

LEVELe Elevator Interiors are available in eight standard configurations. Please see page four for details on each of the configuration options.

STANDARD INSET MATERIAL OPTIONS

STAINLESS STEEL BONDED METAL® VIVIDGLASS & DIAMALITE Stainless steel can be specified for insets and ceilings Light in weight yet extremely durable, Bonded Metal’s Many of our VividGlass design options can be specified in all of our standard finishes. In addition, a variety of high relief, highly detailed surface has the character including selections from our ViviChrome, ViviGraphix, three-dimensional patterns can be applied to insets to add and appearance of solid metal. Please refer to the ViviSpectra, ViviStone and ViviStrata families. Please visual interest or to enhance functionality. Please refer to Bonded Metal Product Data Sheet for finish swatches refer to the VividGlass Product Data Sheets for pattern our website and the Stainless Steel Product Data Sheet for and additional information. swatches and additional information. complete information on available stainless steel finishes and patterns. Diamalite Glass Panels can be used as an alternative to VividGlass, where weight restrictions apply. Please refer to the Diamalite Glass Panels Product Data Sheet for more information.

FUSED METAL® BONDED QUARTZ WOOD VENEER Fused Metal is Forms+Surfaces' exclusive line of colored Unlike anything else on the market, Bonded Quartz Our natural wood veneers are finished with three coats stainless steel created by fusing titanium alloys to the combines ceramic microspheres and a fiber-reinforced of polyurethane for superior abrasion resistance while stainless substrate at the molecular level. Fused Metal polymer matrix to create a material that is lightweight, maintaining all the richness and authenticity of genuine provides the durability and low maintenance of stainless durable, and easy to clean. The standard color for wood. Please refer to the Wood Veneer Product Data Sheet steel in a range of rich color options and can be specified for Bonded Quartz is Bonded White; custom colors are also for material options and additional information. insets and ceilings. Please refer to the Fused Metal Product available for larger projects. Please refer to the Bonded Data Sheet for finish swatches and additional information. Quartz Product Data Sheet for finish swatches and additional information.

THIRD PARTY INSET MATERIALS

Customers sometimes wish to specify their own inset materials to match lobby walls or other areas on specific projects. This is generally feasible, provided the materials meet certain dimensional requirements. Please call for more information.

RELATED PRODUCTS

LIGHTPLANE PANELS ELEVATOR DOOR SKINS LEVELe COLUMN SYSTEM LightPlane panels are engineered LED edge-lit panels Forms+Surfaces Elevator Door Skins can be LEVELe Column System allows for a range of materials to that are a standard offering in LEVELe elevator interiors - incorporated in matching colors, patterns and finishes. be incorporated into any design project. Forms+Surfaces' allowing you to seamlessly illuminate an elevator interior. LEVELe Column System draws on our extensive palette of LightPlane panels have the same visible profile as Capture options and may be specified in a wide range of materials panels and are available exclusively with a wide range of our and finishes. Please see the LEVELe Column System VividGlass products. Please refer to the LightPlane Product Product Data Sheet for additional information. Data Sheet for pattern options and additional information.

LEVELe WALL SYSTEM DOORS ARCHITECTURAL ACCENTS Our LEVELe Wall System can be incorporated in matching Forms+Surfaces also manufactures a complete Sheet goods to match your elevator interior are available colors, patterns and finishes in areas surrounding elevators. range of entrance doors, and door pulls in matching for headers, jams, returns, transoms and other areas. Our LEVELe Wall System is available in the same materials and materials and finishes to LEVELe Elevator Interiors. railings, litter & recycling containers, site furnishings and finishes that are offered in LEVELe Elevator Interiors. other amenities are all available in materials and finishes that complement those offered in LEVELe Elevator Interiors.

T 1.800.451.0410 | F 412.781.7840 | www.forms-surfaces.com

page 2 of 8 | Rev. 12-09-16 ® LEVELe ELEVATOR INTERIORS PRODUCT DATA

COMPATIBILITY & WEIGHT

SHELL COMPATIBILITY WEIGHT INFORMATION LEVELe Elevator Interiors can be specified for elevators • LEVELe elevator interior panels weigh up to approximately 2-3 lbs. per square foot depending on the inset material of any size, weight capacity, or door configuration. Most selected, with the exception of glass, which is approximately 5.25 lbs. per square foot. interiors are installed in steel elevator shells and can • Diamalite Glass Panels can be used as an alternative to standard laminated glass, where weight restrictions apply. also be supplied with appropriate screws for installation • Ceilings (including lights and structural elements) weigh approximately 2.97 lbs. per square foot. in wood shells. Most elevator shells are found to be out- • Handrail weights vary by series and length. of-square to some degree. The LEVELe wall panels and • Estimated total weights for customer-specified cab interiors can be provided by Forms+Surfaces once shell corner reveals have sufficient tolerances built into them dimensions, material selections and other system options are detailed in the Design Guide. to easily accommodate the vast majority of out-of-square conditions or other dimensional irregularities.

DELIVERY & INSTALLATION

DELIVERY WALL PANEL INSTALLATION PANEL REPLACEMENT Wall panels, bases, reveals, and handrails for each Designed to be quick and efficient, LEVELe installation If wall panels are ever damaged due to accident or individual cab arrive in a single crate, unless glass panels starts with pre-tapped extrusion channels mounted with vandalism, replacement panels can be ordered from are required. Glass or LightPlane Panels will be packed self-tapping fasteners. These horizontal extrusion channels Forms+Surfaces. The attachment system permits one separately in A-frame crates, making it easy to organize set the alignment for the wall panels and establish reveals. panel to be removed without disturbing those around it, materials on site. Ceilings, if specified, are also crated Wall panel frames have integral clips that interlock with keeping downtime to a minimum. separately. The crate arrives with components neatly the extrusion channels for fast and easy installation. organized and includes all the necessary fasteners, adhesives and installation instructions.

MAINTENANCE

STAINLESS STEEL & FUSED METAL BONDED METAL & BONDED QUARTZ VIVIDGLASS & DIAMALITE WOOD VENEER Fingerprints and smudges can be removed using a Bonded Metal & Bonded Quartz require very little VividGlass & Diamalite surfaces Veneer surfaces can be non-chlorinated spray cleaner/degreaser such as maintenance. Routine dust should be removed can be maintained using standard maintained using standard Simple Green® and a microfiber cloth. Do not use by periodic vacuuming or with a soft brush. commercial, non-streaking cleaners commercial cleaners and polishes harsh abrasives, acids or chlorine-based cleaners Fingerprints, smudges and more persistent dirt and polishes formulated for use on formulated for use on interior or cleaning tools containing carbon steel, such as can be removed by using an ammonia-free glass. woods. steel wool or wire brushes. cleaner/degreaser such as Simple Green.

CUSTOM ELEVATOR INTERIORS

If your design requirements go beyond the standard LEVELe configuration, material and finish offerings, customized versions are available for an additional charge. Please call us to discuss your needs.

HOW TO SPECIFY

Design Guides are available for each standard LEVELe model to lead you through the specification process in a simple, checkbox format. The Design Guide captures all the information needed to generate a quote: dimensions, finishes, handrail selections and other options. CSI specifications are also available on our website.

T 1.800.451.0410 | F 412.781.7840 | www.forms-surfaces.com

page 3 of 8 | Rev. 12-09-16 ® LEVELe ELEVATOR INTERIORS PRODUCT DATA

CONFIGURATIONS LEVELe Elevator Interiors are available in eight standard configurations. Visit www.elevatordesignstudio.com to configure your elevator interior using theElevator Design Studio, our interactive online design tool that puts creative control at your fingertips. The intuitive, step-by-step format lets you choose an elevator interior configuration, apply materials and finishes from our extensive Surfaces library, view your progress in realistic renderings, and request budget pricing—all with a few simple clicks. Give it a try and you’ll see how easy it is.

LEVELe-101 LEVELe-102 LEVELe-103

LEVELe-104 LEVELe-105 LEVELe-106

LEVELe-107 LEVELe-108

T 1.800.451.0410 | F 412.781.7840 | www.forms-surfaces.com

page 4 of 8 | Rev. 12-09-16 ® LEVELe ELEVATOR INTERIORS PRODUCT DATA

HANDRAIL OPTIONS Optional handrails in a choice of six standard series can be specified for elevator interior back walls and/or side walls. For elevator door openings that are flush with the adjacent side wall(s), a returned handrail configuration (see Round Series, Radius Bend End on page 6) is recommended. When selecting a VividGlass handrail panel, Compass handrails with Bullet or Cylinder standoffs are recommended. Other handrails will require an escutcheon cover at each standoff.

COMPASSTM SERIES

1.25" diameter tubular rail with choice of Bullet, Cylinder, Ring, Double Ring or Clamshell standoffs. Metals and finishes can be mixed or matched on rails and standof fs to create either uniform or contrasting effects.

Rail Material and Finish Options Bullet • Satin Stainless Steel • Satin Bronze • Polished Stainless Steel • Polished Bronze • Stippled Stainless Steel • Stippled Bronze • Santoprene • Oil-Rubbed Bronze Double Ring • Stippled Oil-Rubbed Bronze

Standoff Material and Finish Options Cylinder • Satin Stainless Steel • Satin Bronze • Polished Stainless Steel • Polished Bronze • Stippled Stainless Steel • Stippled Bronze • Oil-Rubbed Bronze • Stippled Oil-Rubbed Bronze

Clamshell Ring

QUADRANTTM SERIES

1" x 1.5" rectangular cross-section rail oriented with the wide edge facing out, with Block, Clamp or Vise standoffs. Metals and finishes can be mixed or matched on rails and standoffs to create either uniform or contrasting effects.

Rail Material and Finish Options • Satin Stainless Steel • Satin Bronze Block • Polished Stainless Steel • Polished Bronze • Stippled Stainless Steel • Stippled Bronze • Oil-Rubbed Bronze • Stippled Oil-Rubbed Bronze Vise Standoff Material and Finish Options • Satin Stainless Steel • Satin Bronze • Polished Stainless Steel • Polished Bronze • Stippled Stainless Steel • Stippled Bronze • Oil-Rubbed Bronze Clamp • Stippled Oil-Rubbed Bronze

T 1.800.451.0410 | F 412.781.7840 | www.forms-surfaces.com

page 5 of 8 | Rev. 12-09-16 ® LEVELe ELEVATOR INTERIORS PRODUCT DATA

SEXTANTTM SERIES

1.5" diameter tubular rail with choice of Bullet, Column, Cylinder or Taper finials. Tee standoffs join segments of Sextant rail. Metals and finishes can be mixed or matched on rails and finials to create either uniform or contrasting effects.

Bullet Rail Material and Finish Options • Satin Stainless Steel • Satin Bronze • Polished Stainless Steel • Polished Bronze • Stippled Stainless Steel • Stippled Bronze Taper • Santoprene

Cylinder

Finial Material and Finish Options • Satin Stainless Steel • Satin Bronze • Polished Stainless Steel • Polished Bronze • Stippled Stainless Steel • Stippled Bronze Tee • Oil-Rubbed Bronze Column

MODULAR SERIES

1.25" diameter tubular rail with L-shaped standoffs. Standoffs are always Clear Anodized Aluminum with Satin finish.

Rail Material and Finish Options • Satin Stainless Steel • Polished Stainless Steel • Stippled Stainless Steel

ROUND SERIES

1.25" or 1.5" diameter round rail with choice of radius bend ends or flat ends with integral standoffs. Rails and standoffs are always the same metal and finish.

Rail Material and Finish Options • Satin Stainless Steel • Satin Bronze • Polished Stainless Steel • Polished Bronze • Stippled Stainless Steel • Stippled Bronze Radius Bend End Flat End • Oil-Rubbed Bronze

RECTANGULAR SERIES

1" x 2" rectangular cross-section rail with integral standoffs. Rails and standof fs are always the same metal and finish.

Rail Material and Finish Options • Satin Stainless Steel • Satin Bronze • Polished Stainless Steel • Polished Bronze • Stippled Stainless Steel • Stippled Bronze • Oil-Rubbed Bronze

T 1.800.451.0410 | F 412.781.7840 | www.forms-surfaces.com

page 6 of 8 | Rev. 12-09-16 ® LEVELe ELEVATOR INTERIORS PRODUCT DATA

CEILING CEILING OPTIONS CEILING INSTALLATION LIGHTING • Wall panels integrate easily with existing ceilings or you can • The ceiling uses a side-mount installation • All lighting systems include a power supply, wire harnessing specify a ceiling to complete your cab package. The standard system that attaches the ceiling to the and an integrated LED dimmer. Lighting systems come ceiling is a six-panel suspended island design with six low upper side walls of the elevator shell. This pre-wired with a 12 foot lead to allow for mounting to top of -voltage, high-efficiency LED downlights or high-output LED system makes the ceiling very easy to cab shell. perimeter lighting. When using LED downlights, LED perimeter install and provides a generous range of • A dedicated input circuit is required for ceilings that are accent lighting or high-output LED perimeter lighting may also be adjustment to align the ceiling with the specified with a lighting option. specified. Our ceilings can support a maximum of nine wall panels. • In LED downlight systems, each of the downlights is downlights. • A canopy-mount option incorporating mounted in a black, cast metal housing with quick • Ceiling panels consist of Stainless Steel or Fused Metal track-adjustable tie rods is also available -disconnect terminals. decorative faces applied to a structural backer with black reveals. for large elevators and elevator • High-output LED perimeter lighting is available as a Any of the standard Stainless Steel or Fused Metal finishes listed configurations not conducive to the side standalone system, or it can be combined with our LED below may be specified. -mount standard. downlight system. • The ceiling perimeter is extruded aluminum with a clear anodized • A minimum of 8” of clearance from the • LED perimeter accent lighting is available for use with LED finish. cab shell ceiling to the visible ceiling face downlights. is necessary for installation of the ceiling.

LED DOWNLIGHTS LAMP POWER SUPPLY • MR16, 3x2W High Power Spotlight • LED Transformer • Housing Material: Die-cast Aluminum • Wattage: 100W • Mounting: Quick-mount spring toggles, allow installation or removal from either side of face panel • Input Voltage: AC 120-240V • Metal Finish: Black Polyester powdercoat • Current: 5 Amps • Fixture Dimensions: Overall Height: 2.0" | Cutout Hole: 2-11/16" | Overall Diameter: 3-1/4" • Output Voltage: 12V AC • Base type: GU5.3 • Dimensions: 8" depth x 14" width x 4" height (nominal) • Wattage: 6W • Compliance: UL listed components • LED Quantity: 6/Lamp • Input Voltage: 12V • Lumens: 320lm/lamp • Color temperature: 3,000-3,500K • Rated Life: 35,000 hours • Beam Angle: 36 degrees • Compliance: ROHS & UL listed

LED PERIMETER ACCENT LIGHTING (ONLY AVAILABLE WITH LED DOWNLIGHT SYSTEM) LAMP POWER SUPPLY • SMD 3528 Flexible LED strips, 300 LEDs/strip (approximately 500-600 per cab) • LED Transformer • Housing Material: Extruded Aluminum • Wattage: 100W • Mounting: Pre-installed in Extruded Aluminum channel • Input Voltage: AC 120-240V • Metal Finish: Clear Anodized • Current: 12.5 Amps • Fixture Dimensions: Overall Height: 1.43" | Overall Depth: 2.1" • Output Voltage: 12V AC and 12V DC • Wattage: 1.6W/lineal foot • Dimensions: 8" depth x 14" width x 4" height (nominal) • LED Quantity: 60/m or 18.3/ft • Compliance: UL listed components • Input Voltage: 12V • Lumens: 68lm/ft • Color temperature: 3,000-3,5000K • Rated Life: 50,000 hours • Beam Angle: 120 degrees • Compliance: ROHS & UL listed

T 1.800.451.0410 | F 412.781.7840 | www.forms-surfaces.com

page 7 of 8 | Rev. 12-09-16 ® LEVELe ELEVATOR INTERIORS PRODUCT DATA

HIGH-OUTPUT LED PERIMETER LIGHTING (AVAILABLE STANDALONE OR WITH LED DOWNLIGHT SYSTEM) LAMP POWER SUPPLY • SMD 5050DD Flexible LED strips, 300 LEDs/strip (approximately 500-600 per cab) • LED Transformer • Housing Material: Extruded Aluminum • Wattage: 150W • Mounting: Pre-installed in Extruded Aluminum channel • Input Voltage: AC 120-240V • Metal Finish: Clear Anodized • Current: 12.5 Amps • Fixture Dimensions: Overall Height: 1.43" | Overall Depth: 2.1" • Output Voltage: 12V DC • Wattage: 4.4W/lineal foot • Dimensions: 8" depth x 14" width x 4" height (nominal) • LED Quantity: 60/m or 18.3/ft • Compliance: UL listed components • Input Voltage: 12V • Lumens: 307lm/ft • Color temperature: 3,000-3,500K • Rated Life: 50,000 hours • Beam Angle: 120 degrees • Compliance: ROHS & UL listed

EMERGENCY & VENTILATION EMERGENCY LIGHTING EMERGENCY EXIT Emergency lighting is included in the standard lighting system, unless otherwise specified in writing. The The emergency exit can be placed anywhere in the ceiling as emergency lighting system incorporates an additional power supply with a battery to power the emergency lights in needed to line up with the exit opening in the cab shell canopy. the event of a main power failure. The power supply includes an automatic battery charger, test switch, low battery The Design Guide asks you to detail the exact placement and voltage circuit, and alarm terminals. The emergency lights are integrated into the standard downlight system, any of this information will be verified via approval drawings. the downlights, as specified, can act as the emergency light. In ceilings without downlights, a separate emergency lighting system will be located at the front of the cab, unless otherwise specified.

VENTILATION FIRE RATINGS

Elevator Interiors are designed to accommodate most standard vent configurations. Unusual or non-standard Backer materials and all Stainless Steel and Fused Metal are ventilation requirements should be brought to our attention and detailed in the approval drawings to ensure Class A/I fire-rated for smoke development and flame spread. compliance once material is installed.

CODE COMPLIANCES LEVELe wall panels, bases, handrails and ceilings comply with the following codes and guidelines: ASME A17.1-2010: Safety Code for Car Enclosures, Car Doors and Gates, and Car Illumination - Section 2.14 2.14.1.2 Securing of Enclosures 2.14.1.5 Top Emergency Exits 2.14.2.1 Material for Car Enclosures, Enclosure Linings, and Floor Coverings 2.14.2.3 Ventilation 2.14.2.4 Headroom in Elevator Cars 2.14.7.4 Protection of Light Bulbs and Tubes 2001 California Building Code, Chapter 30 3003.4.7 Car Inside* 3003.4.12 Handrails Americans with Disabilities Act Accessibility Guidelines (ADAAG) 4.10.9 Floor Plan of Elevator Cars* *Complies when installed in most common sizes of passenger cabs and service cabs. Purchasing party is responsible for ensuring that finished installation maintains minimum floor dimensions required by ADA guidelines and applicable local codes.

T 1.800.451.0410 | F 412.781.7840 | www.forms-surfaces.com

page 8 of 8 | Rev. 12-09-16