Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Schaller Electronic GmbH An der Heide 15 D-92353 Postbauer-Heng Telefon: +49 9180 9100 Telefax: +49 9180 2600 E-Mail: [email protected]
Surface finishing This Schaller M6 locking machine head is an example of the subtle differences between various surface finishes.
NI-Nickel CH-Chrome SC-SatinChrome
1 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
BC-BlackChrome GO-Gold (24 carat) RU-Ruthenium
SP-SatinPearl VC-VintageCopper
Here you can see our high-quality plating in direct comparison:
2 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
NI-Nickel, CH-Chrome, SC-Satinchrome, BC-Blackchrome, GO-Gold, RU-Ruthenium, SP-SatinPearl, VC-VintageCopper.
To view a larger image of a product with each finish, click on the desired product in the "Versions" tab in the product catalog, and then switch to the "Description" tab. The image shown here can then be enlarged by clicking on it.
Measure specifications All measurements in the product catalogue are given in mm (inch), unless a different unit of measurement is stated.
Technical drawings and operating instructions We do not accept any liability for the correctness of the technical drawings. Prior to installation, please measure for yourself once more, so you can consider regular manufacturing tolerances.
Please note that the technical data can also vary slightly, depending on the surface color. This is due to the difference in the galvanic coating and the galvanic layering, which depends on the color (nickel, chrome etc).
The technical drawings can be printed on one page width. Should the technical drawings not fit on one page, however, please check your print page setup (note: they can be several pages long).
From time to time, the measurements given in the file downloads on our website may differ from those given in the catalogue. Please bear in mind that the measurements given in the online downloads are current. Any discrepancies will be corrected when the catalogue is updated.
3 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Housings Machine Heads Two different housings are available for some machine heads: screw lug 135°, for external mounting via screws; and “Pin”, for locking on the head plate. The difference can be seen in the following images:
4 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Version screw lug 135° Version with Pin Version with Pin
The following table provides the type of attachment and axis diameter for all Schaller machine heads in mm (inch). Several machine heads come in different versions.
Machine Heads screw lugs Pin Diameters adjusting axis Diameters of bore holes for axis Thickness of headplate from - to GrandTune 2 screws 6,0 (0,2362) 8,9 (0,3504) 11,0 - 14,0 (0,4331-0,5512) GrandTune Ukulele 2 screws 6,0 (0,2362) 8,9 (0,3504) 10,0 - 12,0 (0,3937-0,4724) F-Series Standard - 2 6,0 (0,2362) 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087) F-Series Locking - 2 6,0 (0,2362) 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087) F-Series 70s 2 screws 6,0 (0,2362) 9,8 (0,3858) 11,0 - 13,0 (0,4331-0,5118) F-Series ST6B 2 screws 6,0 (0,2362) 8,3 (0,3268) 11,0 - 16,0 (0,4331-0,6299) G-Series Big Jazz 2 screws 7,0 (0,2756) 9,8 (0,3858) 11,0 - 15,0 (0,4331-0,5906) G-Series Keystone SR 2 screws 6,0 (0,2362) 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087) G-Series Keystone SR Locking 2 screws 6,0 (0,2362) 9,8 (0,3858) 11,0 - 15,0 (0,4331-0,5906) G-Series Keystone DR 2 screws 6,0 (0,2362) 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087) G-Series Keystone DR Locking 2 screws 6,0 (0,2362) 9,8 (0,3858) 11,0 - 15,0 (0,4331-0,5906) Da Vinci - 1 6,0 (02362) 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087) M6 180° 6,0 (0,2362) 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087)
M6 Pin - 1 6,0 (0,2362) 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087)
5 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Machine Heads screw lugs Pin Diameters adjusting axis Diameters of bore holes for axis Thickness of headplate from - to M6 135 135° 6,0 (0,2362) 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087) M6 Pin small - 1 6,0 (0,2362) 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087) M6 Mini 90° 6,0 (0,2362) 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087) M6 Mini 90° + 270° 6,0 (0,2362) 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087)
M6 Locking 135° 6,0 (0,2362) 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087) M6 Locking Pin - 1 6,0 (0,2362) 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087)
M6 Mini Toplocking 90° 6,0 (0,2362) 9,8 (0,3858) 11,0 - 15,0 (0,4331-0,5906)
M6 Toplocking 180° 6,0 (0,2362) 9,8 (0,3858) 11,0 - 15,0 (0,4331-0,5906) M6 Vintage 90° centered 6,0 (0,2362) 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087) M6 Vintage Toplocking 90° centered 6,0 (0,2362) 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087) Da Vinci Bass - 2 11,0 (0,4331) 14,0 (0,5512) 11,5 - 16,0 (0,4528-0,6299) BM 4 screws 14,0 (0,5512) 17,5 (0,6890) 11,0 - 15,0 (0,4331-0,5906) Original F-Series BMF 4 screws 14,0 (0,5512) 17,5 (0,6890) 11,0 - 15,0 (0,4331-0,5906) Original F-Series Deluxe Bass - 2 13,0 (0,5118) 17,0 (0,6693) Original F-Series BM Light - 2 13,0 (0,5118) 17,0 (0,6693) BM Light - 2 13,0 (0,5118) 17,0 (0,6693) 11,0 - 15,5 (0,4331-0,6102) M4S - 2 13,0 (0,5118) 17,0 (0,6693) 11,0 - 15,5 (0,4331-0,6102) M4S Light - 2 13,0 (0,5118) 17,0 (0,6693) 11,0 - 15,5 (0,4331-0,6102) M4 180° - 8,0 (0,3150) 12,0 (0,4724) 14,0 - 19,0 (0,5512-0,7480) M4 Light 90° - 9,0 (0,3543) 14,0 (0,5512) 11,5 - 16,0 (0,4528-0,6299) M4 180 180° - 8,0 (0,3150) 12,0 (0,4724) 15,0 - 19,0 (0,5906-0,7480) M4 90 90° centered - 8,0 (0,3150) 12,0 (0,4724) 15,0 - 19,0 (0,5906-0,7480)
Classic Deluxe "Selmer-Style" on Groundplate - 9,8 (0,3858) - Lyra 1 on Groundplate - 10 (0,3937) -
6 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Machine Heads screw lugs Pin Diameters adjusting axis Diameters of bore holes for axis Thickness of headplate from - to Lyra 2 on Groundplate - 9,8 (0,3858) - Lyra 3 on Groundplate - 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087) Hauser 1 on Groundplate - 10 (0,3937) - Hauser 2 on Groundplate - 9,8 (0,3858) - Hauser 3 on Groundplate - 9,8 (0,3858) 11,0 - 18,0 (0,4331-0,7087)
Some image examples:
screw lug 90 degrees screw lug 90 degrees centered screw lug 135 degrees
screw lug 180 degrees 2 screws centered 2 screws offset
7 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
2 screws 4 screws 2 screw lug 90/270 degrees offset
All machine heads and buttons can also be ordered individually.
Shaft lengths The following table provides the shaft length or, more precisely, the distance between housing and bore hole for the string for all Schaller machine heads:
Typ Machine Heads 1 2 3 4 5 6 inch GrandTune 3/3 21,7 21,7 21,7 21,7 21,7 21,7 0,8543 GrandTune Ukulele 2/2 18,2 18,2 18,2 18,2 18,2 18,2 0,7165 F-Series Standard 6 in line 21,7 21,7 21,7 21,7 21,7 21,7 0,8543 F-Series Locking 6 in line 19,5 19,5 19,5 18,0 18,0 18,0 0,7677 / 0,7087 F-Series 70s 6 in line 20,1 20,1 20,1 20,1 20,1 20,1 0,7913 F-Series ST6B 3/3 19,5 19,5 19,5 19,5 19,5 19,5 0,7677 G-Series Big Jazz 3/3 22,6 22,6 22,6 22,6 22,6 22,6 08898 G-Series Keystone SR 3/3 24,5 24,5 24,5 24,5 24,5 24,5 0,9646 G-Series Keystone SR Locking 3/3 19,5 19,5 19,5 19,5 19,5 19,5 07677 G-Series Keystone DR 3/3 24,0 24,0 24,0 24,0 24,0 24,0 0,9449 G-Series Keystone DR Locking 3/3 19,5 19,5 19,5 19,5 19,5 19,5 07677 Da Vinci 3/3 24,0 24,0 24,0 24,0 24,0 24,0 0,9449 6 in line
8 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
M6 3/3 24,0 24,0 24,0 24,0 24,0 24,0 0,9449 6 in line M6 Pin 24,0 24,0 24,0 24,0 24,0 24,0 0,9449 M6 135 3/3 24,0 24,0 24,0 24,0 24,0 24,0 0,9449 6 in line M6 Pin small 3/3 24,0 24,0 24,0 24,0 24,0 24,0 0,9449 6 in line M6 Mini 3/3 24,0 24,0 24,0 24,0 24,0 24,0 0,9449 6 in line M6 Locking 3/3 19,5 19,5 19,5 19,5 19,5 19,5 0,7677
6 in line 19,5 19,5 19,5 18,0 18,0 18,0 0,7677 / 0,7283
M6 Locking Pin 3/3 19,5 19,5 19,5 19,5 19,5 19,5 0,7677 6 in line 19,5 19,5 19,5 18,0 18,0 18,0 0,7677 / 0,7283 M6 Mini Toplocking 3/3 19,5 19,5 19,5 19,5 19,5 19,5 0,7677 6 in line M6 Toplocking 3/3 19,5 19,5 19,5 19,5 19,5 19,5 0,7677
6 in line
M6 Vintage 3/3 24,0 24,0 24,0 24,0 24,0 24,0 0,9449 6 in line M6 Vintage Toplocking Da Vinci Bass 24,0 24,0 24,0 24,0 24,0 24,0 0,9449 BM 2/2 25,5 25,5 25,5 25,5 25,5 25,5 1,0039 3/2 4 in line Original F-Series BMF 3/2 25,5 25,5 25,5 25,5 25,5 25,5 1,0039 4 in line
9 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Original F-Series Deluxe Bass 24,5 24,5 24,5 24,5 24,5 24,5 0,9646 Original F-Series BM Light 24,5 24,5 24,5 24,5 24,5 24,5 0,9646 BM Light 2/2 23,0 23,0 23,0 23,0 23,0 23,0 0,9055
3/2
4 in line
M4S 2/2 25,0 25,0 25,0 25,0 25,0 25,0 0,9843
4 in line
M4S Light 2/2 20,5 20,5 20,5 20,5 20,5 20,5 0,8071 4 in line M4 2/2 26,7 26,7 26,7 26,7 26,7 26,7 1,0512
3/2
4 in line
M4 Light 24,0 24,0 24,0 24,0 24,0 24,0 0,9449 M4 180 2/2 26,7 26,7 26,7 26,7 26,7 26,7 1,0512 3/2 4 in line M4 90 2/2 26,7 26,7 26,7 26,7 26,7 26,7 1,0512 3/2 4 in line Classic Deluxe "Selmer-Style" 3/3 13,0 13,0 13,0 13,0 13,0 13,0 0,5118 Lyra 1 3/3 14,4 14,4 14,4 14,4 14,4 14,4 0,5669 Lyra 2 3/3 14,0 14,0 14,0 14,0 14,0 14,0 0,5512 Lyra 3 3/3 23,5 23,5 23,5 23,5 23,5 23,5 0,9252 Hauser 1 3/3 14,4 14,4 14,4 14,4 14,4 14,4 0,5669
10 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Hauser 2 3/3 14,0 14,0 14,0 14,0 14,0 14,0 0,5512 Hauser 3 3/3 23,5 23,5 23,5 23,5 23,5 23,5 0,9252
Adjusting shaft length (distance between housing and midway bore hole)
Model Shaft Length (in mm) Emberger slotted shafts Standard alternative Length GrandTune 21,7 - - possible GrandTune Ukulele 18,2 - - possible F-Series Standard 21,7 18,0 - - F-Series Locking 18,0 /19,5 - - - F-Series 70s 20,1 - 20,4 / 23,0 - F-Series ST6B 19,5 - - No G-Series Big Jazz 22,0 - - - G-Series Keystone SR 24,0 21,7 / 18,0 - - G-Series Keystone SR Locking 19,5 - - - G-Series Keystone DR 24,0 22,0 / 18,0 / 21,0 23,0 Yes G-Series Keystone DR Locking 19,5 - - - Da Vinci 24,0 22,0 / 18,0 / 21,0 23,0 Yes M6 24,0 22,0 / 18,0 / 21,0 23,0 Yes M6 Pin 24,0 - - - M6 135 24,0 22,0 / 18,0 / 21,0 23,0 Yes M6 Pin small 24,0 22,0 / 18,0 / 21,0 23,0 Yes M6 Mini 24,0 22,0 / 18,0 / 21,0 23,0 Yes M6 Locking 19,5 / 18,0 21,0 - No M6 Locking Pin 19,5 / 18,0 21,0 - No M6 Mini Toplocking 19,5 - - No M6 Toplocking 19,5 - - No
11 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
M6 Vintage 24,0 22,0 / 18,0 / 21,0 23,0 Yes M6 Vintage Toplocking Da Vinci Bass 24,0 - BM 31,0 - - - Original F-Series BMF 31,0 - - - Original F-Series Deluxe Bass 24,5 - - Yes Original F-Series BM Light 24,5 - - Yes BM Light 33,0 - - - M4S 33,0 - - - M4S Light 20,5 - - Yes M4 32,0 drilled 26,5 (NBE) - - M4 Light 24,0 - - - M4 180 26,7 drilled 26,5 (NBE) - - M4 90 26,7 - - - Classic Deluxe "Selmer-Style" 13,0 22,5 - - Lyra 1 14,4 - - - Lyra 2 14,0 12,2 - - Lyra 3 23,5 20,9 - - Hauser 1 14,4 - - - Hauser 2 14,0 12,2 - - Hauser 3 23,5 20,9 - -
String thickness The following table shows the max. string thickness of the machine heads. (string gauge in inch / 0,001)
Machine Heads Bore diameter Ø Sloth width maximum (mm) (mm) string gauge
12 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
GrandTune 2,0 - 78 GrandTune Ukulele 2,0 - 78 F-Series Standard 2,0 - 78 F-Series Locking 1,5 - 59 F-Series 70s -1,351 F-Series ST6B 2,0 - 78 G-Series Big Jazz 2,0 - 78 G-Series Keystone SR 2,0 - 78 G-Series Keystone SR Locking 1,7 - 67 G-Series Keystone DR 2,0 - 78 G-Series Keystone DR Locking 1,7 - 67 Da Vinci 2,0 - 78 M6 2,0 - 78 M6 Pin 2,0 - 78 M6 135 2,0 - 78 M6 Pin small 2,0 - 78 M6 Mini 2,0 - 78 M6 Locking 1,5 - 59 M6 Locking Pin 1,5 - 59 M6 Mini Toplocking 1,7 - 67 M6 Toplocking 1,7 - 67 M6 Vintage 2,0 - 78 M6 Vintage Toplocking Da Vinci Bass -3,0118 BM - 3,4 134 Original F-Series BMF - 3,4 134 Original F-Series Deluxe Bass -3,0 Original F-Series BM Light 3,0
13 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
BM Light -3,0118 M4S -3,0118 M4S Light -3,0 M4 -2,598 M4 Light -3,0118 M4 180 -2,598 M4 90 -2,598 Classic-Deluxe "Selmer-Style" 2,0 - 78 Lyra 1 2,2 - 86 Lyra 2 - Lyra 3 - Hauser 1 2,2 - 86 Hauser 2 2,0 - 78 Hauser 3 2,0 - 78 Banjo B5 1,8 - 71 Banjo B4 1,5 - 59 Banjo B4 D-Tuner 0,9 - 35 Ukulele 2,0 - 78
Machine Heads combination Here are all conceivable combinations of left and right tuning heads and the desired numbers of each which are available to order. All machine heads and buttons can also be ordered individually. All conceivable combinations are depicted here, irrespective of the type of guitar or bass.
Every other possible combination for 8-string / 12-string instruments etc. is also possible, of course.
The following machine heads can be easily mounted from left to right or interchangeably, from right to left: BM and BMF
For the sake of simplicity, the images show only one machine head of the relevant type, either as a left or right-side model. This means that a right-side machine head model may be depicted for the "6-in-line" combination; in such cases, however, the machine head can of course be ordered both as a left and right-side model.
14 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Headstock 2-2 Headstock 3-1 Headstock 3-2
Headstock 4-0 Headstock 4-1 Headstock 4- 2
Headstock 4-3 Headstock 5-0 Headstock 5-1
15 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Headstock 5-2 Headstock 6-0 Headstock 6-1
Headstock 7-0 Headstock Les Paul
Shafts for classical machine heads The use of the different shafts enables the classic machine heads to be adapted to the various instrument head plates. The right shafts are used for metal and gut/synthetic strings.
Classical guitar and mandolin machine heads come with four different types of shaft:
1 = Nylon-shaft (brass with a plastic sleeve) 2 = Emberger shaft 3 = Gibson shaft 4 = slotted shaft
Shafts "2" and "3" require the use of thrust bearings.
This image shows the different types of shaft and the choice of finishes available (nickel, chrome, gold, nylon shaft in white and black):
16 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
17 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
All shafts can also generally be supplied in the eight different surface finishes available (see above).
The following machine heads can be fitted with the following shafts:
Machine Heads shaft options GrandTune 1-3 GrandTune Ukulele 1-3 F-Series Standard 4 F-Series Locking 4 F-Series 70s 4 F-Series ST6B - G-Series Big Jazz 4 G-Series Keystone SR - G-Series Keystone SR Locking - G-Series Keystone DR - G-Series Keystone DR Locking - Da Vinci 2-3 M6 2-3 M6 Pin 2-3 M6 135 2-3 M6 Pin small 2-3 M6 Mini 2-3 M6 Locking - M6 Locking Pin - M6 Mini Toplocking - M6 Toplocking - M6 Vintage - M6 Vintage Toplocking
18 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Da Vinci Bass - BM - Original F-Series BMF - Original F-Series Deluxe Bass - Original F-Series BM Light - BM Light - M4S - M4S Light - M4 - M4 Light - M4 180 - M4 90 - Classic-Deluxe "Selmer-Style" - Lyra 1 1-3 Lyra 2 Lyra 3 Hauser 1 1-3 Hauser 2 Hauser 3 Banjo B5 - Banjo B4 - Banjo B4 D-Tuner - Ukulele -
Unless your order specifies otherwise, we deliver the following shafts as standard:
Model Shaft Classic Deluxe "Selmer-Style" Emberger Hauser Shaft 1 white
19 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Lyra Shaft 1 white
This list shows the options available when selecting a shaft:
Nylon shaft brass with a plastic Emberger shaft Gibson shaft Emberger shaft brass with a plastic sleeve (1) sleeve(4)
(2) (3)
ItemNo. Design Finish white black Nickel Chrome Gold Nickel Chrome Gold white black
. Classic Deluxe 10190163 closed Nickel yes yes yes yes yes yes yes yes no no 10190263 closed Chrome yes yes yes yes yes yes yes yes no no 10190563 closed Gold yes yes yes yes yes yes yes yes no no . Hauser/Lyra
10340152 Lyra, open Nickel yes yes yes no no yes no no no no
10340552 Lyra, open Gold yes yes no no yes no no yes no no
10330152 Hauser, open Nickel yes yes yes no no yes no no no no
10330552 Hauser, open Gold yes yes no no yes no no yes no no
.
MGP4 with real mother-of-pearl button.
This image gives another overview of the available options:
20 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
21 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
This list shows the shaft lengths which we supply as standard (in mm). Alternative lengths, which we will be happy to supply upon request, are shown in brackets. The shaft length is measured from the housing to the center of the string hole. All measurements are given in mm.
Nylon shaft brass with a Emberger shaft Gibson shaft Emberger shaft brass with a plastic sleeve (1) plastic sleeve(4)
(2) (3)
ItemNo. Design Finish white black Nickel Chrome Gold Nickel Chrome Gold white black
. Classic Deluxe 10190163 closed Nickel 15,0 15,0 13,4 13,4 13,4 21,0 21,0 21,0 no no 10190263 closed Chrome 15,0 15,0 13,4 13,4 13,4 21,0 21,0 21,0 no no 10190563 closed Gold 15,0 15,0 13,4 13,4 13,4 21,0 21,0 21,0 no no . Hauser/Lyra 10340151 Lyra, open Nickel 14,5 14,5 14 no no 23(21) no no no no (12,2)
10340551 Lyra, open Gold 14,5 14,5 no no 14 no no 23(21) no no (12,2)
10330151 Hauser, open Nickel 14,5 14,5 14 no no 23(21) no no no no (12,2)
10330551 Hauser, open Gold 14,5 14,5 no no 14 no no 23(21) no no (12,2)
These images give another overview of the available shafts (standard and options):
The measurements in the images below represent the shaft length from the rear of the housing to the middle bore hole for the string, i.e.for the split shaft to the lower edge of the split.
22 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
The measurements in brackets represent the distance from the rear of the housing to the middle bore hole i.e. the lower edge of the split including the base plate.
Hauser/Lyra:
Classic Deluxe:
23 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Thrust bearing and capstan for machine heads All measurements are given in mm. The inner and outer dimensions are given in the column "Dm" (diameter). Alternative capstan lengths, which can be supplied upon request, are given in the column "A-length". TM=Topmount.
banjo thrust length Dm inner Dm outer A-length
bolt bearing
GrandTune X 6,1 (0,2402) 8,8 (0,3465) GrandTune Ukulele X 6,1 (0,2402) 8,8 (0,3465)
24 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
F-Series Standard X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378) F-Series Locking X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378) F-Series 70s X 7,5 (0,2953) 6,1 (0,2402) 10,0 (0,3937) F-Series ST6B X 9,6 (0,3780) 6,2 (0,2441) 8,7 (0,3425)
G-Series Big Jazz X 9,1 (0,3583) 7,1 (0,2795) 9,8 (0,3858) G-Series Keystone SR X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378) G-Series Keystone SR Locking X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378) G-Series Keystone DR X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378)
G-Series Keystone DR Locking X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378) Da Vinci X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378) M6 X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378)
M6 Pin X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378) M6 135 X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378) M6 Pin small X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378) M6 Mini X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378)
M6 Locking X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378)
M6 Locking Pin X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378) M6 Mini Toplocking X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378)
M6 Toplocking X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378)
M6 Vintage X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378)
M6 Vintage Toplocking Da Vinci Bass X 14,5 (0,5709) 11,1 (0,4370) 14,0 (0,5512) BM X 10,1 (0,3976) 14,1 (0,5551) 17,0 (0,6693)
25 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Original F-Series BMF X 10,1 (0,3976) 14,1 (0,5551) 17,0 (0,6693)
Original F-Series Deluxe Bass X 16,0 (0,6299) Original F-Series BM Light X 16,0 (0,6299) BM Light X 16,0 (0,6299) 13,0 (0,5118) 16,7 (0,6575)
M4S X 16,0 (0,6299) 13,0 (0,5118) 16,7 (0,6575)
M4S Light X 16,0 (0,6299) M4 X 15,7 (0,6181) 9,2 (0,3622) 12,0 (0,4724)
M4 Light X 14,5 (0,5709) 9,1 (0,3583) 14,0 (0,5512) M4 180 X 15,7 (0,6181) 9,2 (0,3622) 12,0 (0,4724)
M4 90 X 15,7 (0,6181) 9,2 (0,3622) 12,0 (0,4724) Classic Deluxe "S-Style" X 7,5 (0,2953) 6,1 (0,2402) 10,0 (0,3937) Lyra 1 X 7,5 (0,2953) 6,1 (0,2402) 10,0 (0,3937)
Lyra 2 X Lyra 3 X Hauser 1 X 7,5 (0,2953) 6,1 (0,2402) 10,0 (0,3937) Hauser 2 X Hauser 3 X B5 - - 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378)
B4 X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378)
B4 D-Tuner X 13,2 (0,5197) 6,0 (0,2362) 7,8 (0,3071) 11,7 / 16,2 (0,4606 / 0,6378)
Ukulele X 7,0 / 9,0 5,8 / 6,8 8,5 / 11,1
(0,2756 / 0,3543) (0,2283 / 0,2677) (0,3346 / 0,4370)
26 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
This image gives an overview of the available thrust bearings and banjo bolts:
Overview of all machine heads Legend:
Features Explanation Model/combination (6left, 3/3 All = All combinations are possible (6/0, 5/1, 4/2, 3/3 etc; see individual listings in the guideline above) etc.) Surface NI-Nickel, CH-Chrome, SC-Satinchrome, BC-Blackchrome, GO-Gold, RU-Ruthenium, SP-SatinPearl, VC-VintageCopper, BS-Brass, BL-Black (siehe Einzelaufstellung im Leitfaden oben)
27 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Weight Weight g/item., Differences are due to different button types. Diameter HS Diameter Headstock from - to
Machine Heads for guitar Features GrandTune GrandTune Ukulele F-Series Standard F-Series Locking F-Series 70s Picture
Model/combination all all all all all Surface NI, CH, SC, NI, CH, SC, NI, CH, SC, NI, CH, SC, NI, CH, SC, BC, GO, RU, BC, GO, RU, BC, GO, RU, BC, GO, RU, BC, GO, RU, SP, VC SP, VC SP, VC SP, VC SP, VC Ratio 1:18 1:18 1:16 1:16 1:16 Weight g/item 25 25 40 49 25 Bore (mm) 6,0 6,0 9,8 9,8 9,8 lug/Pin 2 screws 2 screws 2 Pins 2 Pins 2 screws Diameter HS (mm) 11-14 10-12 11-18 11-18 11-13 Shaft lengths (mm) 21,7 18,2 21,7 19,5 / 18,0 20,4 String thickness max. (mm) 1,91 1,91 1,91 1,5 1,3
Features F-Series G-Series G-Series G-Series G-Series G-Series ST6B Big Jazz Keystone SR Keystone SR Keystone DR Keystone DR Locking Locking Picture
28 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Model/combination all all all all all all Surface NI, GO, VC CH, GO NI, GO NI, GO NI, GO, VC NI, GO, VC
Ratio 1:16 1:12 1:16 1:16 1:16 1:16 Weight g/item 26 32 25 25 30 30 Bore (mm) 6,0 7,0 8,3 8,3 9,8 9,8 lug/Pin 2 screws 2 screws 2 screws 2 screws 2 screws 2 screws Diameter HS (mm) 11-16 11-15 11-16 11-15 11-16 11-15 Shaft lengths (mm) 19,5 22,6 24 19,5 24 19,5 String thickness max. (mm) 1,91 1,8 1,91 1,37 1,91 1,37
Features M6 M6 Pin M6 135 M6 Pin small M6 Mini Picture
Model/combination all all all all all Surface NI, CH, SC, NI, CH, SC, NI, CH, SC, NI, CH, SC, NI, CH, SC, BC, GO, RU, SP, BC, GO, RU, SP, BC, GO, RU, SP, BC, GO, RU, SP, BC, GO, RU, SP, VC VC VC VC VC
Ratio 1:12 1:12 1:16 1:16 1:14 Weight g/item 40, 45 40, 45 40, 45 40, 45 36 Bore (mm) 9,8 9,8 9,8 9,8 9,8 lug/Pin 180° Pin 135° Pin 90°/ 90°+270 Diameter HS (mm) 11-18 11-18 11-18 11-18 11-15,5 Shaft lengths (mm) 24 24 24 24 24 String thickness max. 1,91 1,91 1,91 1,91 1,91 (mm)
29 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Features M6 Locking M6 Locking M6 Mini M6 Da Vinci M6 Vintage Pin Toplocking Toplocking Picture
Model/combination all all all all all all Surface NI, CH, SC, NI, CH, SC, NI, CH, SC, NI, CH, SC, NI, CH, SC, NI, CH, SC, BC, GO, BC, GO, RU, BC, GO, RU, BC, GO, RU, BC, GO, BC, GO, RU, SP, VC SP, VC SP, VC RU, RU, SP, VC SP, VC SP, VC
Ratio 1:16 1:16 1:14 1:12 1:14 1:16 Weight g/item 49, 52 49, 52 37 44, 49 36 47 Bore (mm) 9,8 9,8 9,8 9,8 9,8 9,8 lug/Pin 135° / 1 Pin Pin 90° 180° Pin 90° centered Diameter HS (mm) 11-15,5 11-15,5 11-15 11-15,5 11-18 11-16 Shaft lengths (mm) 18,0 / 19,5 18 / 19,5 19,5 19,5 24 24 String thickness max. 1,27 1,27 1,5 1,37 1,91 1,91 (mm)
Features M6 Vintage Classic Deluxe Toplocking "Selmer-Style" Picture
Model/combination all left/right Surface NI, CH, SC, NI, CH, GO BC, GO, RU, SP, VC Ratio 1:16 1:14 Weight g/item 47 28 Bore (mm) 9,8 9,8
30 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
lug/Pin 90° centered 8 screws Diameter HS (mm) Shaft lengths (mm) 13 String thickness max. (mm) 1,91
Machine Heads for bass guitar Features Da Vinci Bass BM F-Series F-Series F-Series BM Light BMF Deluxe Bass BM Light Picture
Model/combination all all all 4 left 4 left all Surface NI, CH, SC, NI, CH, SC, NI, CH, SC, NI, CH, SC, NI, CH, SC, NI, CH, SC, BC, GO, RU, BC, GO, RU, BC, GO, RU, BC, GO, RU, BC, GO, RU, BC, GO, RU, SP, VC SP, VC SP, VC SP, VC SP, VC SP, VC
Ratio 1:20 1:20 1:20 1:20 1:22 1:22 Weight g/item 51 98 103 64 50 48 Bore (mm) 14,0 17,5 17,5 13,5 17,0 17,0 lug/Pin 2 Pin 4 screws 4 screws 2 Pin 2 Pin 2 Pin Diameter HS (mm) 10-15 10-15 11-15,5 Shaft lengths (mm) 31 31 33 String thickness max. (mm) 2,67 2,67 2,67
Features M4S M4S Light M4 M4 Light M4 180 M4 90
31 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Picture
Model/combination all all all all all all Surface NI, CH, SC, NI, CH, SC, NI, CH, SC, NI, CH, SC, NI, CH, SC, NI, CH, SC, BC, GO, RU, BC, GO, RU, BC, GO, RU, BC, GO, RU, BC, GO, RU, BC, GO, RU, SP, VC SP, VC SP, VC SP, VC SP, VC SP, VC
Ratio 1:22 1:22 1:12 1:20 1:20 1:20 Weight g/item1157168426060 Bore (mm) 17,0 17,0 12,0 12,0 12,0 12,0 lug/Pin 2 Pin 2 Pin 180° 1 screw 180° 90° centered Diameter HS (mm) 11-15,5 14-19 11,5-16 15-19 15-19 Shaft lengths (mm) 33 32 24 32 32 String thickness max. (mm) 2,67 2,29 2,67 2,29 2,29
Machine Heads for acoustic guitar Features Hauser/Lyra Picture
Model/combination left/right Surface NI, GO
Ratio 1:16 Weight g/item 161 Bore (mm) 10,0
32 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
lug/Pin screws Diameter HS (mm) 11-18 Shaft lengths (mm) String thickness max. (mm) 2,16 / 1,91
Banjo Features B5 B4 B4 D-Tuner Picture
Model/combination left/right left/right left/right Surface NI, CH, GO, BL NI, CH, BC, GO NI, CH, GO
Ratio 1:8 1:4 1:4 Weight g/item 27 37 63 Bore (mm) 9,0 9,8 9,8 lug/Pin - - - Diameter HS (mm) Shaft lengths (mm) String thickness max. (mm) 1,78 1,52 0,91
Ukulele Features Ukulele Picture
Model/combination left/right
33 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Finish mp
Surface NI, CH, GO
Ratio 1:1 Weight g/item 18 Bore (mm) 11,0/8,5 lug/Pin - Diameter HS (mm) Shaft lengths (mm) String thickness max. (mm) 1,91
Overview used screws Download list as pdf.
34 von 35 18.04.2015 13:34 Machine Heads | Schaller-Electronic http://guitar-parts.biz/hp290537/Machine-Heads.htm?ITServ=C13b37caeX14ccc4df307XY27ae
Accessories and packaging The accessories provided for attaching our machine heads, such as female screws, thrust bearings and screws are found in the packaging underneath the styrofoam inlay.
Using the product catalog Please change your print settings to landscape before printing these pages so that the guidelines are complete and readable.
35 von 35 18.04.2015 13:34