IOT Based Home Automation Using Intel EDISON Gen-2 M.Vivek Kumar1, V

Total Page:16

File Type:pdf, Size:1020Kb

IOT Based Home Automation Using Intel EDISON Gen-2 M.Vivek Kumar1, V Volume 3, Issue 4, April– 2018 International Journal of Innovative Science and Research Technology ISSN No:-2456-2165 IOT Based Home Automation using Intel EDISON Gen-2 M.Vivek Kumar1, V. Prabhu2, Ravindra Gupta3, M.Srijith4, NZainulabdin5 Department of Electronics and Communication Engineering Sri Eshwar College of Engineering, Coimbatore-641202 Abstract:- Presently in days home security is so vital. At 21st century person turn into a piece of programmed II. PROBLEM STATEMENT framework. All individual swings to programmed framework. In this day and age Automatic frameworks are To fabricate an Intel Galileo board Ethernet Wi-Fi to being favoured over manual framework as quickly control all the electric/electronic gadget associated with changes increments of propel innovation about home security and to give greater adaptability of doing thing or more securing web offices individual resemble to such an extent. That is homes or workspaces. the reason we are taking this point for chip away at the task. Web of things is a developing system of ordinary III. LITERATURE REVIEW protest from mechanical machine to shopper home apparatuses that can pass data and finish errands while you A Smart Home Environment with Gen2. are occupied with different exercises. In this paper we are available IOT based home computerization utilizing Intel In this paper A Smart Home Environment with Edison-Gen2.we made little (small) circuit for singular Gen2framework can give sensor information to android gadget entryway, fan, light, window and interface with the Intel and got information store in content record. Edison gen-2 board. Web Of Thing Based Home Appliances Control. Keywords:- Automatic Systems, Intel Edison gen-2 board, IOT, Home appliances, information. In this paper IOT is utilized. IOT is a framework that utilizations PCs or cell phones to control essential home I. INTRODUCTION capacities and highlights consequently through Internet from anyplace around the globe. In this venture we are utilizing remote innovation for home computerization. A home computerization framework is IOT Based Monitoring and Control System for home an implies that enable clients to control electric machines of Automation is in view of raspberry-pi and IOT. differing kind. The principle point of the undertaking is to build up a framework that will control of home machines .the In This paper portray an approach in which they are essential prerequisite or need is android application due to we actualize a controlling and persistent observing framework to are general home apparatuses through android application. control different home machines with Android advanced Home mechanization frameworks create to consequently mobile phone. In this paper it is incorporation of cloud accomplish a few exercises performed every now and again in organizing, remote correspondence, to furnish the client with day by day life to get more agreeable and simpler life remote control of different lights, fans, and machines inside condition. In home mechanization that can distinguish and their home and putting away the information in the cloud. recognize you, naturally alter the lighting to your predefined taste, open entryways consequently, around evening time and IOT based keen home plan utilizing force and security turn them off early in the day, stream to you anyplace on the administration. planet by means of the web. It is intended to spare the electric power and human vitality. IOT scope is wide and incorporates In this paper the System to self-governing force assortment of articles like advanced cells, tablets. When every control framework in an easy to understand and a portable way one of these gadgets are associated with each other, they with the goal that a client can deal with the power empower an ever increasing number of brilliant procedures and administration and in addition security of their home. At the administrations that help our fundamental needs. point when not at the house itself, limiting the power utilization. In our undertaking we are giving two offices consequently task and physically activity. We are work home computerization via naturally and in addition physically it is absolutely rely upon our decision. In the event that some issue happens in the consequently we can utilize physically. IJISRT18AP19 www.ijisrt.com 1 Volume 3, Issue 4, April– 2018 International Journal of Innovative Science and Research Technology ISSN No:-2456-2165 breakout board has input current utmost and over temperature shutdown. Guarantee the end configuration does not trip these insurance components. V. ARCHITECTURAL MODEL Fig 1:- A Smart Home Environment with Gen2 IV. DESCRIPTION Intel® Edison Kit for Arduino gives the Arduino 1.0 pinout and standard connectors, for example, a miniaturized scale USB associated with a UART, a USB OTG port that can be exchanged between a moment small scale USB gadget Fig 2:- Architectural Model connector, a standard size USB have Type-A connector, a USD card holder, and a DC control jack. Like an Arduino Uno, the This is the compositional model of our venture. Intel® Edison Kit for Arduino makes conceivable to have gives Presently sensor likes, 20 computerized input/yield pins, of which 6 can be utilized as simple information sources. The Intel® Edison has 4 PWM yields which can be arranged by means of jumpers to any of the Temperature Sensor-Show temp level in portable App. 6 pins supporting PWM on the Arduino Uno (pins 3, 5, 6, 9, Gas Sensor-Fire and Smoke Detection. 10, or 11).The Intel® Edison Kit for Arduino is intended to be PIR sensor-Motion Detection. equipment and programming pin-good with Arduino shields LDR Sensor-Depend on Light Intensity. intended for the Arduino Uno R3. Computerized pins 0 to 13 (and the contiguous AREF and GND pins), Analog sources of This sensor sense information and provide for Intel info 0 to 5, the power header, ICSP header, and the UART port Galileo board. At that point board Send the warning to the pins (0 and 1), are all in an indistinguishable areas from on the android application. The client can open application to right off Arduino Uno R3.The advanced IOs and simple pins can be the bat associate MQTT server at that point give the notice to arranged to work at either 5V or 3.3V. The yields can source or the client whatever (association is set up or association is sink 24 mA at 3.3V and 32 mA at 5V. The Intel® Edison is a fizzle.) If Connection is set up then access android application. low-control gadget. When all is said in done, it doesn't draw in On the off chance that the association is flop at that point not excess of 200 mA with 600 mA brief span spikes amid Wi-Fi get to android application at that point go come back to server transmit. In this way, an Intel® Edison gadget may keep network or sit tight for Wi-Fi accessibility. running on USB control (when arranged as a gadget), or an outer power connector from 7 to 15 V. Power from the outer VI. RESULT power connector goes to a DC-DC converter and down- changed over to 5 V. This power goes to a battery recharger IC, The Home Automation System (HAS) is only savvy which restrains the yield voltage to 4.4 V. This voltage is in the home. We are making little circuits for Example, for example, protected range for the Edison module VSYS. The VSYS for entryway, for window, for light (utilize LDR sensor), for control extend is 3.15 to 4.5 V. This permits the Intel® Edison kitchen (Using Gas Sensor), for Human entering or going out gadget to keep running off a standard lithium-particle battery. from home(using PIR Sensor) all these small circuit associated Intel® Edison Breakout Board The on-board charger IC is with the Intel Galileo Gen-2 board. arranged to confine the current to 1 A. The charger is modified to charge at 190 mA. This charger is intended to charge VII. CONCLUSION standard lithium-particle batteries with 4.2 V most extreme charging voltage. You are in charge of picking an appropriate The Home Automation utilizing Internet Of Things battery and following all wellbeing safety measures, to has been demonstrated to work acceptably by associating anticipate cheating or charging when the battery temperature is straightforward machines to it and the apparatuses were too high. The downside to this plan is that the direct supply effectively controlled through web. The planned framework control drop puts an utmost on the aggregate power through the not just screen the sensor information, similar to temperature, Intel® Edison board and the 3.3 and 1.8 V supplies. The power gas, light, movements sensor, yet in addition activates a misfortune through the charger will be (4.4 to 5 V) times procedure as indicated by the prerequisite for instance current. For this situation, you should endeavor to restrain exchanging on the light when it gets dull. normal current through the Intel® Edison board and its energy rails to around 0.75 A.The recharger IC on the Intel® Edison IJISRT18AP19 www.ijisrt.com 2 Volume 3, Issue 4, April– 2018 International Journal of Innovative Science and Research Technology ISSN No:-2456-2165 VIII. FUTURE SCOPE The venture can be extended to incorporate different choices which could incorporate home security include like catching the picture of a man moving around the house. In future we can include additionally some voice cautions, SMS or alert framework. At that point framework can be extended for vitality checking, or climate stations. This sort of a framework with separate changes can be executed in the doctor's facilities for incapacitate or rationally irritate individuals or in enterprises where human attack is incomprehensible or unsafe, more basic and it can likewise be actualized for natural observing.
Recommended publications
  • LAB-Manual Iot for Intel Edison
    Evaluation of Intel Architecture An Experimental Manual for Computer Architecture, Advanced Microprocessor, System On Chip (SoC) and Compiler Design In association with Intel Collaboration Program Designed by: Zeenat Shareef, MTech (Mobile and Pervasive Computing) Under the guidance of: Dr. S.R.N Reddy, HOD and Associate Professor, CSE Mr. Naveen , Mr. Sumit Verma, Intel Department of Computer Science Indira Gandhi Delhi Technical University for Women Kashmere Gate, Delhi-110006 LIST OF EXPERIMENTS EXP. No Description of Experiment 1. To familiarize with Intel Edison. 2. Write the steps to install the drivers and IDE for Intel Edison 3. Write the steps to configure Intel Edison and enable the WIFI module 4. To enable the Bluetooth module in Intel Edison and connect with a device. 5. Write the steps to blink the LED on the Intel Edison using Eclipse CDT remote explorer(WiFi). EXPERIMENT 1 AIM: To familiarize with Intel Edison. INTEL EDISON- A SOC based on Intel Atom The Intel Edison compute module is designed to lower the barriers to entry for anyone prototyping and producing IoT and wearable computing products. Intel Edison contains the core system processing and connectivity elements: processor, PMIC, RAM, eMMC, and Wi- Fi/BT. Intel Edison is a module that interfaces with end-user systems via a 70-pin connector. The Intel Edison compute module does not include any video input or output interfaces (MIPI CSI, MIPI DSI, HDMI, etc.). Internal image processing and graphics processing cores are disabled (ISP, PowerVR, VED, VEC, VSP, etc.). Intel Edison relies on the end-user support of input power.
    [Show full text]
  • Intel Edison Workshop
    Note: This presentation was made and provided by Intel during the Intel Embedded Education & Research Summit in March 2015 Intel Edison Workshop Setting up Edison Step by Step Our Workshop Goal: 1.Unbox Edison 2.Learn how to connect and configure Edison board: Serial connecton Name /WiFi set up/Password 3. Install drivers (New Windows Installer amd manual install) 4. Intel Development IoT Kit 5. Install IDEs 6. Run example code Intel® Edison Arduino Expansion Board Assembly https://software.intel.com/en‐us/articles/intel‐edison‐arduino‐expansion‐board‐assembly Microswitch and USB Ports Details The slider switches between USB host mode and USB device mode. Device mode: The switch is toggled down and a micro‐USB cable can be used to turn the Intel® Edison into a computer peripheral. Device mode allows you to do such things as: program the board over USB, or mount the onboard flash memory like a disk drive. Host mode: The switch is toggled up and USB peripherals with a standard‐sized USB cable (such as mice, keyboards, etc) can be plugged into the Intel® Edison. USB host mode requires the use of an external power adapter. The Intel Edison board has three USB ports: The middle port (Micro A type) is used for the following: •Power through USB •Ethernet over USB •Uploading Arduino sketches •Updating the firmware by using the board as a storage device, like a flash drive The edge port (Micro A type) is used to create a terminal connection by serial over USB only. Power Through DC Plug If you are going to use more power intensive features such as Wi‐Fi, a servo motor, or an Arduino shield, use a DC power supply in addition to the device mode micro‐USB cable.
    [Show full text]
  • Introduction to Microcontrollers 9/16/2017
    Introduction to Microcontrollers 9/16/2017 Introduction to Microcontrollers June 2017 Scott A. Theis — W2LW Rev 5 (08/02/2017) What’s it all about • How to get started • What are some of the common controller options • General introduction to terms and types • Input and Output • Information on getting started Sampling of Microcontrollers • tinyAVR — As little as 6 pins, over 1MHz • PICAXE — As little as 8 pins, up to 64MHz • Ardunio (ATMega) — Standalone or on board, 16+MHz • Raspberry Pi — Single-Board Computer, up to (and over) 1GHz • There are dozens of common microcontrollers Propeller BasicStamp 8051 MIP • There are a number of single-board computers: Beagle Bone NetDuino Intel Galileo ASUS Tinker Scott A. Theis, W2LW 1 Introduction to Microcontrollers 9/16/2017 Focus • Arduino and PICAXE— Microcontroller: • Well suited for specific application • Code is lightweight (so is memory) • Does not have an operating system per se • Raspberry Pi — Single-Board Computer: • Really a small computer with GPIO pins and lots of interface logic • Can be used for a wide spectrum of tasks • Lots of options and compute power Covering…. • Introduction, Jargon and Background • General Purpose Input and Output (GPIO) • Integrated Development Environment (IDE) • Some Examples Introduction, Background and Jargon Scott A. Theis, W2LW 2 Introduction to Microcontrollers 9/16/2017 The Arduino • Created as a simple, open source, easy to use platform • Developed in 2003 as a less costly replacement to the BASIC Stamp • Support has grown dramatically in the past
    [Show full text]
  • Ethernet Access and Remote Control with Intel Galileo Prepared By
    Ethernet Access and Remote Control with Intel Galileo Prepared by Derrick Anang For EECE456 Embedded Systems Design Lab Instructor: Dr. Charles Kim Electrical and Computer Engineering Howard University Class Web: www.mwftr.com/emblab.html 1 INTEL® GALILEO ∗ Intel® Galileo Gen2 Board A microcontroller board based on the Intel® Quark SoC X1000 application processor (a 32-bit Intel® Pentium brand system on a chip). The 32-bit processor can run at up to 400MHz and has a 512KB SRAM built in. This board functions as a fully featured, cost-effective development platform which complements with the Arduino software to provide an advanced compute functionality. It basically serves as an interface between the Arduino Software (IDE) and the Grove system components. ∗ It comes with an on-board 10/100 Mb/s Ethernet connector port. ∗ This on-board Ethernet port is accessible via Linux and Arduino IDE using the Ethernet Library. 2 GETTING STARTED HARDWARE COMPONENTS ∗ Intel® Galileo Gen 2 Board ∗ Micro-SD Card ∗ USB to 6-pin FTDI Serial Cable ∗ Ethernet Cable ∗ Grove Starter Kit ∗ An Ethernet Switch or Wi-Fi Router with a free Ethernet port (connects Galileo board to the Local Access Network (LAN) being used) ∗ Micro B to Type A USB Cable ∗ 12 VDC, 1.5A Power Supply 3 SOFTWARE COMPONENTS ∗ Arduino Integrated Development Environment (IDE) for Galileo ∗ Intel XDK IoT Edition (Download link: http://software.intel.com/en- us/html5/xdk-iot) ∗ Terminal Emulator e.g. PuTTy (http://www.putty.org/)or Bonjour Browser for Mac OS, link: (http://www.tildesoft.com/files/BonjourBrowser.dmg)
    [Show full text]
  • Paper Title (Use Style: Paper Title)
    Overview of architectures with Arduino boards as building blocks for data acquisition and control systems Vladimir Cvjetkovic Milan Matijevic Faculty of Science Faculty of Engineering University of Kragujevac University of Kragujevac Kragujevac, Serbia Kragujevac, Serbia [email protected] [email protected] Abstract— Standard SBCs (Single Board Computer) with Control of some local system number of standard shields and sensors can be used as building blocks for rapid development of network of intelligent devices with Upload of acquired and processed data to some cloud sensing, control and Internet access. Arduino family of boards network storage having high popularity and large number of sold units featuring Some or all of these functionalities can be present including open access, reliability, robustness, standard connections and low prices, possesses large potential for implementation of also some specific not mentioned here. Mentioned autonomous remote measurement and control systems of various functionalities are quite general and do not pose limitations by levels of complexity. As Arduino boards can function themselves, as the real limits of IoT devices are mainly independently, they are complete small computer platforms that determined by processing power, speed, available memory, can perform various tasks requiring some kind of interaction with power consumption and similar characteristics. If the task for the outer world. Arduino boards can be used and programmed in some IoT device is too demanding, the possibility of logically various ways, and can be arranged in various combinations redefining the task so that more than one IoT device could be forming some typical implementation architectures that this paper used and combined to fulfill the given task, should be discusses.
    [Show full text]
  • An Efficient Solution of Technological Thrust for Iot in COVID-19
    International Journal of Engineering in Computer Science 2020; 2(2): 30-33 E-ISSN: 2663-3590 P-ISSN: 2663-3582 IJECS 2020; 2(2): 30-33 An efficient solution of technological thrust for IoT in Received: 22-05-2020 Accepted: 24-06-2020 COVID-19 era Rakesh Kumar RNTU, Bhopal, Rakesh Kumar, Pratishtha Bowade and Rajiv Saxena Madhya Pradesh, India Pratishtha Bowade Abstract SIRT, Bhopal, The stringent connectedness between the digital and physical world is referred to as IoT (Internet of Madhya Pradesh, India Things). In the COVID-19 era, technology is being implemented in a rigorous manner to handle and balance the situation. Internet of Things (IoT) technology is playing a great role in all the aspects. In Rajiv Saxena this research paper researcher compare four hardware platforms and concluded the best suitability of SIRT, Bhopal, the hardware platform. Researchers provide the solution to the technological thrust for the IoT in terms Madhya Pradesh, India of the hardware platform. Keywords: internet of things, COVID-19, technological thrust, hardware platforms Introduction The term "Internet of Things" is used as a keyword to cover various aspects related to Internet and Web expansion in the physical space, through the widespread deployment of distributed geographical devices with integrated use of Internet-Things that foresees the future where digital and physical objects can be linked, through relevant knowledge and [1] communication technologies, enabling a whole new category of applications and services . The Internet of Things (IoT) is one of the most promising research topics in engineering and business. It is believed that the IoT will revolutionize the way people live in the near future by connecting ordinary things with each other remotely and establishing channels of communication between them.
    [Show full text]
  • Galileo Datasheet
    Galileo Datasheet Galileo Front Galileo Back Overview Galileo is a microcontroller board based on the Intel® Quark SoC X1000 Application Processor, a 32-bit Intel Pentium-class system on a chip (datasheet). It is the first board based on Intel® architecture designed to be hardware and software pin-compatible with Arduino shields designed for the Uno R3. Digital pins 0 to 13 (and the adjacent AREF and GND pins), Analog inputs 0 to 5, the power header, ICSP header, and the UART port pins (0 and 1), are all in the same locations as on the Arduino Uno R3. This is also known as the Arduino 1.0 pinout. Order Number: 329681-003US Galileo is designed to support shields that operate at either 3.3V or 5V. The core operating voltage of Galileo is 3.3V. However, a jumper on the board enables voltage translation to 5V at the I/O pins. This provides support for 5V Uno shields and is the default behavior. By switching the jumper position, the voltage translation can be disabled to provide 3.3V operation at the I/O pins. Of course, the Galileo board is also SW compatible with the Arduino SW Development Environment, which makes usability and introduction a snap. In addition to Arduino HW and SW compatibility, the Galileo board has several PC industry standard I/O ports and features to expand native usage and capabilities beyond the Arduino shield ecosystem. A full sized mini-PCI Express* slot, 100Mb Ethernet port, Micro-SD slot, RS-232 serial port, USB Host port, USB Client port, and 8MByte NOR flash come standard on the board.
    [Show full text]
  • An Open Source Tool for Iot Development What Is the Product
    An Open Source Tool for IoT Development What is the product 2 The technology: Hardware ▪ Before Raspberry Pi Currently experiencing rapid growth 7,000 ▪ expensive embedded devices 6,000 ▪ few devices 5,000 4,000 ▪ Raspberry Pi changed 3,000 the game 2,000 1,000 0 2014 2015 2016 Number of connected devices (millions) 3 Our journey: The vision ▪ Goal: ▪ A new approach towards engineering ▪ IoT accessible to everyone Create, modify, tweak, customize current solutions to your needs and use cases 4 The IoT stack The problem • Arduino (Uno) does well on Level 2 but does not follow the upper stack • Raspberry Pi follows the full stack, but lacks the benefits of Arduino 5 Microcontrollers vs Embedded Boards ▪ Arduino Yun preferred to Raspberry Pi ▪ The fault ▪ development tools ▪ accessibility Most of the projects are not IoT projects, they fall into electronics or programming 6 The solution ▪ Transfer the accessibility typical of Arduino to Raspberry Pi Ease to use Direct access High Use from productivity anywhere 7 Our tools for IoT : Wyliodrin ▪ Since 2013 ▪ Fully Web-based ▪ Complex IDE ▪ Open Source components ▪ Free for basic use ▪ Supports various hardware: Arduino Yun, Raspberry Pi, Intel® Galileo, Intel® Edison, UDOO, BeagleBone Black 8 Wyliodrin STUDIO ▪ Open Source ▪ Available for ▪ Arduino Yun ▪ UDOO Neo ▪ Raspberry Pi ▪ BeagleBone Black ▪ Works locally 9 Wyliodrin STUDIO Library manager Ethernet / WiFi Run project connection manager Project Manager Connected board Task manager Code Close board connection Show / hide console Board
    [Show full text]
  • Iot Configuration for Industrial and Domestic Water Saving Monitoring
    ARISTOTLE UNIVERSITY OF THESSALONÍKI COMPUTER SCIENCE DEPARTMENT IoT Configuration for Industrial and Domestic Water Saving Monitoring Iraklis Moutidis Advisor: Ioannis Stamelos 1 Abstract The main objective of the thesis is to implement a water flow monitoring system, using a water flow sensor, the Arduino prototyping board and the Raspberry Pi board. The system should be efficient regarding the electricity consumption and flexible regarding the water installation it will be placed. The information obtained from the sensor(s) is uploaded to a cloud platform (Thingspeak.com) and also locally stored on the Raspberry Pi, which is used as a server for any boards like the Arduino that control a sensor. The data can be further processed to obtain more information about the water consumption of the installation. 2 Contents 1. Introduction………………………..………………………………………..………..……6 1.1 Research Background……………………………………………………………….6 1.2 Problem Statement…………………………………………………………………..7 1.3 Objective of the Study……………………………………………………………….8 1.4 Scope of the Study…………………………………………………………………..8 2. Wireless Sensor Networks………….………………………..……………………….9 2.1 Introduction…….…...………………………………………………………………...9 2.2 Types of Wireless Sensor Networks……………………………………………...10 2.3 Applications………………………………………………………………………….12 2.3.1 Military Applications…….…………………………………………………13 2.3.2 Environmental Monitoring………………………………………………..13 2.3.3 Inventory Monitoring……………………………………………………...15 2.3.4 Health Applications………………………………………………………..16 2.4 Internal Sensor System……………..……………………………………………..16
    [Show full text]
  • ODROID Magazine
    I/O Shield access • Install and learn the basics of Rebol now! Year One Issue #2 Feb 2014 ODROIDMagazine Turn your ODROID into a: GIANT TABLET And create the ultimate Android experience! High Performance computing at home • Meet an Odroidian Creation and fine granular control Mauro Ribeiro, Senior Software engineer • Estimating Radio net interference: Using Java mutithreading • Linux Gaming - emulators • Start programming right away! • The art of multi boxing • USB Gadget drivers • 811.02ac router with odroid XU Dominate your device ports to do everything Get up to 433mbit/sec EDITORIAL service to the world-wide ODROID and Open Source communities, Hard Kernel is proud to present its newest contribution to ARM technology: A ODROID Magazine, a free monthly PDF e-zine! This cutting-edge online publication brings you the latest ODROID news, as well as featured articles from the expert community that has grown around the amaz- ing ODROID family of micro-powerhouse computers. Intended for all levels of expertise from beginner to guru, ODROID Magazine features definitive guides for new owners, with easy-to-follow steps in setting up your ODROID, installing operating systems and software, and troubleshooting common issues. For more technical users, each month will feature expert tips, hacker discus- sions, cutting-edge projects, and technical articles to explore new ways of making your ODROID even more versatile. Hard Kernel’s ODROID Magazine is an ideal opportunity for our community to come together to share and contribute articles, so that everyone can be successful with their ODROID. Each month, a series of article topics will be posted for consideration, and all community members are encouraged to send submissions in exchange for monthly rewards for those selected for publication.
    [Show full text]
  • Intel Edison Tutorial – Introduction to Linux After Completing This Tutorial
    Intel® Edison Tutorial: Introduction, Linux Operating System Shell Access and SFTP Intel® Edison Tutorial: Introduction, Linux Operating System Shell Access and SFTP 1 Table of Contents Introduction ......................................................................... Error! Bookmark not defined. List of Required Equipment and Materials ................................................................... 3 Intel Edison Overview .................................................................................................... 4 Key Features ........................................................................................................................... 4 Assembly ........................................................................................................................ 5 Linux Operating System Shell Access – Serial Terminal Connection ...................... 8 Hardware Setup ...................................................................................................................... 8 Windows Operating System ................................................................................................ 10 Apple Mac OS-X Operating System .................................................................................... 13 Linux Operating System ...................................................................................................... 13 Login and Setup ................................................................................................................... 14 Enabling SSH Access
    [Show full text]
  • Lesson 7 Programming Embedded Galileo, Raspberry Pi, Beaglebone and Mbed Platforms
    Lesson 7 Programming Embedded Galileo, Raspberry Pi, BeagleBone and mBed Platforms Chapter-9 L07: "Internet of Things " , Raj Kamal, 2017 1 Publs.: McGraw-Hill Education Development Of Programs For Prototype Development Platforms • Done using an IDE • The cycles of edit-test-debug used • When the simulated results show the successful test runs of the programs, then program instructions embedded Chapter-9 L07: "Internet of Things " , Raj Kamal, 2017 2 Publs.: McGraw-Hill Education Intel Galileo IDE for Windows • Downloadable from Galileo website • Intel Galileo and Arduino combined features • Similarity of IDE with Arduino • Compatibility: Compatible with Arduino shields and similar ICSP header, serial port, • 14 digital I/O pins and 6 analog inputs Chapter-9 L07: "Internet of Things " , Raj Kamal, 2017 3 Publs.: McGraw-Hill Education Intel Galileo IDE for Windows • Ethernet Library: Compatible in usability with Arduino Ethernet library and can connect with HTTP connection using standard WebClient example • PCI Express Mini Cards: can connect to GSM, Bluetooth, WiFi cards using Arduino’s WiFi library. • USB Host Port: USB is dedicated port and usable with Arduino USB Host library and • keyboard or mouse connection to computers. Chapter-9 L07: "Internet of Things " , Raj Kamal, 2017 4 Publs.: McGraw-Hill Education Intel Galileo IDE for Windows • TWI/I2C, SPI Support, Serial Connectivity and MicroSD Support • Compatible with standard Arduino libraries. • Linux distribution running on board: Just 8 MB flash enables node.js (for web projects)
    [Show full text]